Merge tag 'hwmon-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - PMBus driver for MPS Multi-phase mp5023

   - PMBus driver for Delta AHE-50DC fan control module

   - Driver for NZXT RGB&Fan Controller/Smart Device v2

   - Driver for Texas Instruments INA238

   - Driver to support X370 Asus WMI

   - Driver to support B550 Asus WMI

  Other notable changes:

   - Cleanup of ntc_thermistor driver, and added support for Samsung
     1404-001221 NTC

   - Improve detection of LM84, MAX1617, and MAX1617A in adm1021 driver

   - Clean up tmp401 driver, and convert to with_info API

   - Add support for regulators and IR38060, IR38164 IR38263 to ir38064
     PMBus driver

   - Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh to
     k10temp driver

   - Add support for F81966 to f71882fg driver

   - Add support for ONSEMI N34TS04 to jc42 driver

   - Clean up and simplify dell-smm driver

   - Add support for ROG STRIX B550-A/X570-I GAMING to nct6775 driver

  And various other minor improvements and fixes"

* tag 'hwmon-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
  hwmon: (nzxt-smart2) make array detect_fans_report static const
  hwmon: (xgene-hwmon) Add free before exiting xgene_hwmon_probe
  hwmon: (nzxt-smart2) Fix "unused function" warning
  hwmon: (dell-smm) Pack the whole smm_regs struct
  hwmon: (nct6775) Additional check for ChipID before ASUS WMI usage
  hwmon: (mr75203) fix wrong power-up delay value
  hwmon/pmbus: (ir38064) Fix spelling mistake "comaptible" -> "compatible"
  hwmon/pmbus: (ir38064) Expose a regulator
  hwmon/pmbus: (ir38064) Add of_match_table
  hwmon/pmbus: (ir38064) Add support for IR38060, IR38164 IR38263
  hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.
  hwmon: (nct6775) add ROG STRIX B550-A/X570-I GAMING
  hwmon: (pmbus) Add support for MPS Multi-phase mp5023
  dt-bindings: add Delta AHE-50DC fan control module
  hwmon: (pmbus) Add Delta AHE-50DC fan control module driver
  hwmon: prefix kernel-doc comments for structs with struct
  hwmon: (ntc_thermistor) Add Samsung 1404-001221 NTC
  hwmon: (ntc_thermistor) Drop OF dependency
  hwmon: (dell-smm) Unify i8k_ioctl() and i8k_ioctl_unlocked()
  hwmon: (dell-smm) Simplify ioctl handler
  ...

Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml

@@ -76,6 +76,7 @@ properties:
       - const: murata,ncp15wl333
       - const: murata,ncp03wf104
       - const: murata,ncp15xh103
+      - const: samsung,1404-001221
       # Deprecated "ntp," compatible strings
       - const: ntc,ncp15wb473
         deprecated: true

Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml

@@ -26,6 +26,7 @@ properties:
       - ti,ina226
       - ti,ina230
       - ti,ina231
+      - ti,ina238
 
   reg:
     maxItems: 1
@@ -35,6 +36,27 @@ properties:
       Shunt resistor value in micro-Ohm.
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  ti,shunt-gain:
+    description: |
+      Programmable gain divisor for the shunt voltage accuracy and range. This
+      property only applies to devices that have configurable PGA/ADCRANGE. The
+      gain value is used configure the gain and to convert the shunt voltage,
+      current and power register values when reading measurements from the
+      device.
+
+      For devices that have a configurable PGA (e.g. INA209, INA219, INA220),
+      the gain value maps directly with the PG bits of the config register.
+
+      For devices that have ADCRANGE configuration (e.g. INA238) a shunt-gain
+      value of 1 maps to ADCRANGE=1 where no gain divisor is applied to the
+      shunt voltage, and a value of 4 maps to ADCRANGE=0 such that a wider
+      voltage range is used.
+
+      The default value is device dependent, and is defined by the reset value
+      of PGA/ADCRANGE in the respective configuration registers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/trivial-devices.yaml

@@ -73,6 +73,8 @@ properties:
           - dallas,ds4510
             # Digital Thermometer and Thermostat
           - dallas,ds75
+            # Delta AHE-50DC Open19 power shelf fan control module
+          - delta,ahe50dc-fan
             # Delta Electronics DPS-650-AB power supply
           - delta,dps650ab
           # Delta Electronics DPS920AB 920W 54V Power Supply
@@ -121,8 +123,14 @@ properties:
           - ibm,cffps2
             # Infineon IR36021 digital POL buck controller
           - infineon,ir36021
+          # Infineon IR38060 Voltage Regulator
+          - infineon,ir38060
             # Infineon IR38064 Voltage Regulator
           - infineon,ir38064
+          # Infineon IR38164 Voltage Regulator
+          - infineon,ir38164
+          # Infineon IR38263 Voltage Regulator
+          - infineon,ir38263
             # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
           - infineon,slb9635tt
             # Infineon SLB9645 I2C TPM (new protocol, max 400khz)

Documentation/hwmon/asus_wmi_ec_sensors.rst

+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver asus_wmi_ec_sensors
+=================================
+
+Supported boards:
+ * PRIME X570-PRO,
+ * Pro WS X570-ACE,
+ * ROG CROSSHAIR VIII DARK HERO,
+ * ROG CROSSHAIR VIII FORMULA,
+ * ROG CROSSHAIR VIII HERO,
+ * ROG STRIX B550-E GAMING,
+ * ROG STRIX B550-I GAMING,
+ * ROG STRIX X570-E GAMING.
+
+Authors:
+    - Eugene Shalygin <eugene.shalygin@gmail.com>
+
+Description:
+------------
+ASUS mainboards publish hardware monitoring information via Super I/O
+chip and the ACPI embedded controller (EC) registers. Some of the sensors
+are only available via the EC.
+
+ASUS WMI interface provides a method (BREC) to read data from EC registers,
+which is utilized by this driver to publish those sensor readings to the
+HWMON system. The driver is aware of and reads the following sensors:
+
+1. Chipset (PCH) temperature
+2. CPU package temperature
+3. Motherboard temperature
+4. Readings from the T_Sensor header
+5. VRM temperature
+6. CPU_Opt fan RPM
+7. Chipset fan RPM
+8. Readings from the "Water flow meter" header (RPM)
+9. Readings from the "Water In" and "Water Out" temperature headers
+10. CPU current

Documentation/hwmon/asus_wmi_sensors.rst

+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver asus_wmi_sensors
+=================================
+
+Supported boards:
+ * PRIME X399-A,
+ * PRIME X470-PRO,
+ * ROG CROSSHAIR VI EXTREME,
+ * ROG CROSSHAIR VI HERO,
+ * ROG CROSSHAIR VI HERO (WI-FI AC),
+ * ROG CROSSHAIR VII HERO,
+ * ROG CROSSHAIR VII HERO (WI-FI),
+ * ROG STRIX B450-E GAMING,
+ * ROG STRIX B450-F GAMING,
+ * ROG STRIX B450-I GAMING,
+ * ROG STRIX X399-E GAMING,
+ * ROG STRIX X470-F GAMING,
+ * ROG STRIX X470-I GAMING,
+ * ROG ZENITH EXTREME,
+ * ROG ZENITH EXTREME ALPHA.
+
+Authors:
+    - Ed Brindley <kernel@maidavale.org>
+
+Description:
+------------
+ASUS mainboards publish hardware monitoring information via WMI interface.
+
+ASUS WMI interface provides a methods to get list of sensors and values of
+such, which is utilized by this driver to publish those sensor readings to the
+HWMON system.
+
+The driver is aware of and reads the following sensors:
+ * CPU Core Voltage,
+ * CPU SOC Voltage,
+ * DRAM Voltage,
+ * VDDP Voltage,
+ * 1.8V PLL Voltage,
+ * +12V Voltage,
+ * +5V Voltage,
+ * 3VSB Voltage,
+ * VBAT Voltage,
+ * AVCC3 Voltage,
+ * SB 1.05V Voltage,
+ * CPU Core Voltage,
+ * CPU SOC Voltage,
+ * DRAM Voltage,
+ * CPU Fan RPM,
+ * Chassis Fan 1 RPM,
+ * Chassis Fan 2 RPM,
+ * Chassis Fan 3 RPM,
+ * HAMP Fan RPM,
+ * Water Pump RPM,
+ * CPU OPT RPM,
+ * Water Flow RPM,
+ * AIO Pump RPM,
+ * CPU Temperature,
+ * CPU Socket Temperature,
+ * Motherboard Temperature,
+ * Chipset Temperature,
+ * Tsensor 1 Temperature,
+ * CPU VRM Temperature,
+ * Water In,
+ * Water Out,
+ * CPU VRM Output Current.
+
+Known Issues:
+ * The WMI implementation in some of Asus' BIOSes is buggy. This can result in
+   fans stopping, fans getting stuck at max speed, or temperature readouts
+   getting stuck. This is not an issue with the driver, but the BIOS. The Prime
+   X470 Pro seems particularly bad for this. The more frequently the WMI
+   interface is polled the greater the potential for this to happen. Until you
+   have subjected your computer to an extended soak test while polling the
+   sensors frequently, don't leave you computer unattended. Upgrading to new
+   BIOS version with method version greater than or equal to two should
+   rectify the issue.
+ * A few boards report 12v voltages to be ~10v.

Documentation/hwmon/ina238.rst

+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver ina238
+====================
+
+Supported chips:
+
+  * Texas Instruments INA238
+
+    Prefix: 'ina238'
+
+    Addresses: I2C 0x40 - 0x4f
+
+    Datasheet:
+	https://www.ti.com/lit/gpn/ina238
+
+Author: Nathan Rossi <nathan.rossi@digi.com>
+
+Description
+-----------
+
+The INA238 is a current shunt, power and temperature monitor with an I2C
+interface. It includes a number of programmable functions including alerts,
+conversion rate, sample averaging and selectable shunt voltage accuracy.
+
+The shunt value in micro-ohms can be set via platform data or device tree at
+compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
+refer to the Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml for bindings
+if the device tree is used.
+
+Sysfs entries
+-------------
+
+======================= =======================================================
+in0_input		Shunt voltage (mV)
+in0_min			Minimum shunt voltage threshold (mV)
+in0_min_alarm		Minimum shunt voltage alarm
+in0_max			Maximum shunt voltage threshold (mV)
+in0_max_alarm		Maximum shunt voltage alarm
+
+in1_input		Bus voltage (mV)
+in1_min			Minimum bus voltage threshold (mV)
+in1_min_alarm		Minimum shunt voltage alarm
+in1_max			Maximum bus voltage threshold (mV)
+in1_max_alarm		Maximum shunt voltage alarm
+
+power1_input		Power measurement (uW)
+power1_max		Maximum power threshold (uW)
+power1_max_alarm	Maximum power alarm
+
+curr1_input		Current measurement (mA)
+
+temp1_input		Die temperature measurement (mC)
+temp1_max		Maximum die temperature threshold (mC)
+temp1_max_alarm		Maximum die temperature alarm
+======================= =======================================================

Documentation/hwmon/index.rst

@@ -43,6 +43,8 @@ Hardware Monitoring Kernel Drivers
    asb100
    asc7621
    aspeed-pwm-tacho
+   asus_wmi_ec_sensors
+   asus_wmi_sensors
    bcm54140
    bel-pfe
    bpa-rs600
@@ -76,6 +78,7 @@ Hardware Monitoring Kernel Drivers
    ibmpowernv
    ina209
    ina2xx
+   ina238
    ina3221
    intel-m10-bmc-hwmon
    ir35221
@@ -142,6 +145,7 @@ Hardware Monitoring Kernel Drivers
    mlxreg-fan
    mp2888
    mp2975
+   mp5023
    nct6683
    nct6775
    nct7802
@@ -150,6 +154,7 @@ Hardware Monitoring Kernel Drivers
    nsa320
    ntc_thermistor
    nzxt-kraken2
+   nzxt-smart2
    occ
    pc87360
    pc87427

Documentation/hwmon/ir38064.rst

@@ -3,14 +3,38 @@ Kernel driver ir38064
 
 Supported chips:
 
+  * Infineon IR38060
+
+    Prefix: 'IR38060'
+    Addresses scanned: -
+
+    Datasheet: Publicly available at the Infineon website
+      https://www.infineon.com/dgdl/Infineon-IR38060M-DS-v03_16-EN.pdf?fileId=5546d4625c167129015c3291ea9a4cee
+
   * Infineon IR38064
 
     Prefix: 'ir38064'
     Addresses scanned: -
 
-    Datasheet: Publicly available at the Infineon webiste
+    Datasheet: Publicly available at the Infineon website
       https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158db0d9efb67ca
 
+  * Infineon IR38164
+
+    Prefix: 'ir38164'
+    Addresses scanned: -
+
+    Datasheet: Publicly available at the Infineon website
+      https://www.infineon.com/dgdl/Infineon-IR38164M-DS-v02_02-EN.pdf?fileId=5546d462636cc8fb01640046efea1248
+
+  * Infineon ir38263
+
+    Prefix: 'ir38263'
+    Addresses scanned: -
+
+    Datasheet:  Publicly available at the Infineon website
+      https://www.infineon.com/dgdl/Infineon-IR38263M-DataSheet-v03_05-EN.pdf?fileId=5546d4625b62cd8a015bcf81f90a6e52
+
 Authors:
       - Maxim Sloyko <maxims@google.com>
       - Patrick Venture <venture@google.com>
@@ -18,7 +42,7 @@ Authors:
 Description
 -----------
 
-IR38064 is a Single-input Voltage, Synchronous Buck Regulator, DC-DC Converter.
+IR38x6x are a Single-input Voltage, Synchronous Buck Regulator, DC-DC Converter.
 
 Usage Notes
 -----------

Documentation/hwmon/mp5023.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver mp5023
+====================
+
+Supported chips:
+
+  * MPS MP5023
+
+    Prefix: 'mp5023'
+
+  * Datasheet
+
+    Publicly available at the MPS website : https://www.monolithicpower.com/en/mp5023.html
+
+Author:
+
+	Howard Chiu <howard.chiu@quantatw.com>
+
+Description
+-----------
+
+This driver implements support for Monolithic Power Systems, Inc. (MPS)
+MP5023 Hot-Swap Controller.
+
+Device complaint with:
+
+- PMBus rev 1.3 interface.
+
+Device supports direct format for reading input voltage, output voltage,
+output current, input power and temperature.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_max**
+
+**in1_max_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_alarm**
+
+**curr1_max**
+
+The driver provides the following attributes for input power:
+
+**power1_input**
+
+**power1_label**
+
+**power1_alarm**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
+
+**temp1_crit**
+
+**temp1_crit_alarm**

Documentation/hwmon/nzxt-smart2.rst

+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver nzxt-smart2
+=========================
+
+Supported devices:
+
+- NZXT RGB & Fan controller
+- NZXT Smart Device v2
+
+Description
+-----------
+
+This driver implements monitoring and control of fans plugged into the device.
+Besides typical speed monitoring and PWM duty cycle control, voltage and current
+is reported for every fan.
+
+The device also has two connectors for RGB LEDs; support for them isn't
+implemented (mainly because there is no standardized sysfs interface).
+
+Also, the device has a noise sensor, but the sensor seems to be completely
+useless (and very imprecise), so support for it isn't implemented too.
+
+Usage Notes
+-----------
+
+The device should be autodetected, and the driver should load automatically.
+
+If fans are plugged in/unplugged while the system is powered on, the driver
+must be reloaded to detect configuration changes; otherwise, new fans can't
+be controlled (`pwm*` changes will be ignored). It is necessary because the
+device has a dedicated "detect fans" command, and currently, it is executed only
+during initialization. Speed, voltage, current monitoring will work even without
+reload. As an alternative to reloading the module, a userspace tool (like
+`liquidctl`_) can be used to run "detect fans" command through hidraw interface.
+
+The driver coexists with userspace tools that access the device through hidraw
+interface with no known issues.
+
+.. _liquidctl: https://github.com/liquidctl/liquidctl
+
+Sysfs entries
+-------------
+
+=======================	========================================================
+fan[1-3]_input		Fan speed monitoring (in rpm).
+curr[1-3]_input		Current supplied to the fan (in milliamperes).
+in[0-2]_input		Voltage supplied to the fan (in millivolts).
+pwm[1-3]		Controls fan speed: PWM duty cycle for PWM-controlled
+			fans, voltage for other fans. Voltage can be changed in
+			9-12 V range, but the value of the sysfs attribute is
+			always in 0-255 range (1 = 9V, 255 = 12V). Setting the
+			attribute to 0 turns off the fan completely.
+pwm[1-3]_enable		1 if the fan can be controlled by writing to the
+			corresponding pwm* attribute, 0 otherwise. The device
+			can control only the fans it detected itself, so the
+			attribute is read-only.
+pwm[1-3]_mode		Read-only, 1 for PWM-controlled fans, 0 for other fans
+			(or if no fan connected).
+update_interval		The interval at which all inputs are updated (in
+			milliseconds). The default is 1000ms. Minimum is 250ms.
+=======================	========================================================

MAINTAINERS

@@ -3013,6 +3013,20 @@ W:	http://acpi4asus.sf.net
 F:	drivers/platform/x86/asus*.c
 F:	drivers/platform/x86/eeepc*.c
 
+ASUS WMI HARDWARE MONITOR DRIVER
+M:	Ed Brindley <kernel@maidavale.org>
+M:	Denis Pauk <pauk.denis@gmail.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	drivers/hwmon/asus_wmi_sensors.c
+
+ASUS WMI EC HARDWARE MONITOR DRIVER
+M:	Eugene Shalygin <eugene.shalygin@gmail.com>
+M:	Denis Pauk <pauk.denis@gmail.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	drivers/hwmon/asus_wmi_ec_sensors.c
+
 ASUS WIRELESS RADIO CONTROL DRIVER
 M:	João Paulo Rechi Vita <jprvita@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -5440,6 +5454,12 @@ W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/platform/sti/delta
 
+DELTA AHE-50DC FAN CONTROL MODULE DRIVER
+M:	Zev Weiss <zev@bewilderbeest.net>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	drivers/hwmon/pmbus/delta-ahe50dc-fan.c
+
 DELTA DPS920AB PSU DRIVER
 M:	Robert Marko <robert.marko@sartura.hr>
 L:	linux-hwmon@vger.kernel.org
@@ -13837,6 +13857,13 @@ S:	Maintained
 F:	Documentation/hwmon/nzxt-kraken2.rst
 F:	drivers/hwmon/nzxt-kraken2.c
 
+NZXT-SMART2 HARDWARE MONITORING DRIVER
+M:	Aleksandr Mezin <mezin.alexander@gmail.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/nzxt-smart2.rst
+F:	drivers/hwmon/nzxt-smart2.c
+
 OBJAGG
 M:	Jiri Pirko <jiri@nvidia.com>
 L:	netdev@vger.kernel.org

arch/x86/kernel/amd_nb.c

@@ -19,12 +19,14 @@
 #define PCI_DEVICE_ID_AMD_17H_M10H_ROOT	0x15d0
 #define PCI_DEVICE_ID_AMD_17H_M30H_ROOT	0x1480
 #define PCI_DEVICE_ID_AMD_17H_M60H_ROOT	0x1630
+#define PCI_DEVICE_ID_AMD_19H_M10H_ROOT	0x14a4
 #define PCI_DEVICE_ID_AMD_17H_DF_F4	0x1464
 #define PCI_DEVICE_ID_AMD_17H_M10H_DF_F4 0x15ec
 #define PCI_DEVICE_ID_AMD_17H_M30H_DF_F4 0x1494
 #define PCI_DEVICE_ID_AMD_17H_M60H_DF_F4 0x144c
 #define PCI_DEVICE_ID_AMD_17H_M70H_DF_F4 0x1444
 #define PCI_DEVICE_ID_AMD_19H_DF_F4	0x1654
+#define PCI_DEVICE_ID_AMD_19H_M10H_DF_F4 0x14b1
 #define PCI_DEVICE_ID_AMD_19H_M40H_ROOT	0x14b5
 #define PCI_DEVICE_ID_AMD_19H_M40H_DF_F4 0x167d
 #define PCI_DEVICE_ID_AMD_19H_M50H_DF_F4 0x166e
@@ -39,6 +41,7 @@ static const struct pci_device_id amd_root_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M10H_ROOT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M30H_ROOT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M60H_ROOT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M10H_ROOT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M40H_ROOT) },
 	{}
 };
@@ -61,6 +64,7 @@ static const struct pci_device_id amd_nb_misc_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_DF_F3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M10H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F3) },
 	{}
@@ -78,6 +82,7 @@ static const struct pci_device_id amd_nb_link_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_DF_F4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M10H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CNB17H_F4) },

drivers/hwmon/Kconfig

@@ -1414,8 +1414,8 @@ config SENSORS_PC87427
 	  will be called pc87427.
 
 config SENSORS_NTC_THERMISTOR
-	tristate "NTC thermistor support from Murata"
-	depends on !OF || IIO=n || IIO
+	tristate "NTC thermistor support"
+	depends on IIO
 	depends on THERMAL || !THERMAL_OF
 	help
 	  This driver supports NTC thermistors sensor reading and its
@@ -1513,6 +1513,16 @@ config SENSORS_NZXT_KRAKEN2
 	  This driver can also be built as a module. If so, the module
 	  will be called nzxt-kraken2.
 
+config SENSORS_NZXT_SMART2
+	tristate "NZXT RGB & Fan Controller/Smart Device v2"
+	depends on USB_HID
+	help
+	  If you say yes here you get support for hardware monitoring for the
+	  NZXT RGB & Fan Controller/Smart Device v2.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nzxt-smart2.
+
 source "drivers/hwmon/occ/Kconfig"
 
 config SENSORS_PCF8591
@@ -1872,6 +1882,18 @@ config SENSORS_INA2XX
 	  This driver can also be built as a module. If so, the module
 	  will be called ina2xx.
 
+config SENSORS_INA238
+	tristate "Texas Instruments INA238"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the INA238 power monitor
+	  chip. This driver supports voltage, current, power and temperature
+	  measurements as well as alarm configuration.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called ina238.
+
 config SENSORS_INA3221
 	tristate "Texas Instruments INA3221 Triple Power Monitor"
 	depends on I2C
@@ -1939,6 +1961,7 @@ config SENSORS_TMP108
 config SENSORS_TMP401
 	tristate "Texas Instruments TMP401 and compatibles"
 	depends on I2C
+	select REGMAP
 	help
 	  If you say yes here you get support for Texas Instruments TMP401,
 	  TMP411, TMP431, TMP432, and TMP435 temperature sensor chips.
@@ -2215,6 +2238,30 @@ config SENSORS_ATK0110
 	  This driver can also be built as a module. If so, the module
 	  will be called asus_atk0110.
 
+config SENSORS_ASUS_WMI
+	tristate "ASUS WMI X370/X470/B450/X399"
+	depends on ACPI_WMI
+	help
+	  If you say yes here you get support for the ACPI hardware monitoring
+	  interface found in X370/X470/B450/X399 ASUS motherboards. This driver
+	  will provide readings of fans, voltages and temperatures through the system
+	  firmware.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called asus_wmi_sensors.
+
+config SENSORS_ASUS_WMI_EC
+	tristate "ASUS WMI B550/X570"
+	depends on ACPI_WMI
+	help
+	  If you say yes here you get support for the ACPI embedded controller
+	  hardware monitoring interface found in B550/X570 ASUS motherboards.
+	  This driver will provide readings of fans, voltages and temperatures
+	  through the system firmware.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called asus_wmi_sensors_ec.
+
 endif # ACPI
 
 endif # HWMON

drivers/hwmon/Makefile

@@ -9,6 +9,8 @@ obj-$(CONFIG_HWMON_VID)		+= hwmon-vid.o
 # APCI drivers
 obj-$(CONFIG_SENSORS_ACPI_POWER) += acpi_power_meter.o
 obj-$(CONFIG_SENSORS_ATK0110)	+= asus_atk0110.o
+obj-$(CONFIG_SENSORS_ASUS_WMI)	+= asus_wmi_sensors.o
+obj-$(CONFIG_SENSORS_ASUS_WMI_EC)	+= asus_wmi_ec_sensors.o
 
 # Native drivers
 # asb100, then w83781d go first, as they can override other drivers' addresses.
@@ -90,6 +92,7 @@ obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
 obj-$(CONFIG_SENSORS_IIO_HWMON) += iio_hwmon.o
 obj-$(CONFIG_SENSORS_INA209)	+= ina209.o
 obj-$(CONFIG_SENSORS_INA2XX)	+= ina2xx.o
+obj-$(CONFIG_SENSORS_INA238)	+= ina238.o
 obj-$(CONFIG_SENSORS_INA3221)	+= ina3221.o
 obj-$(CONFIG_SENSORS_INTEL_M10_BMC_HWMON) += intel-m10-bmc-hwmon.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
@@ -157,6 +160,7 @@ obj-$(CONFIG_SENSORS_NPCM7XX)	+= npcm750-pwm-fan.o
 obj-$(CONFIG_SENSORS_NSA320)	+= nsa320-hwmon.o
 obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
 obj-$(CONFIG_SENSORS_NZXT_KRAKEN2) += nzxt-kraken2.o
+obj-$(CONFIG_SENSORS_NZXT_SMART2) += nzxt-smart2.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o

drivers/hwmon/adm1021.c

@@ -324,7 +324,7 @@ static int adm1021_detect(struct i2c_client *client,
 {
 	struct i2c_adapter *adapter = client->adapter;
 	const char *type_name;
-	int conv_rate, status, config, man_id, dev_id;
+	int reg, conv_rate, status, config, man_id, dev_id;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		pr_debug("detect failed, smbus byte data not supported!\n");
@@ -349,9 +349,19 @@ static int adm1021_detect(struct i2c_client *client,
 	if (man_id < 0 || dev_id < 0)
 		return -ENODEV;
 
-	if (man_id == 0x4d && dev_id == 0x01)
+	if (man_id == 0x4d && dev_id == 0x01) {
+		/*
+		 * dev_id 0x01 matches MAX6680, MAX6695, MAX6696, and possibly
+		 * others. Read register which is unsupported on MAX1617 but
+		 * exists on all those chips and compare with the dev_id
+		 * register. If it matches, it may be a MAX1617A.
+		 */
+		reg = i2c_smbus_read_byte_data(client,
+					       ADM1023_REG_REM_TEMP_PREC);
+		if (reg != dev_id)
+			return -ENODEV;
 		type_name = "max1617a";
-	else if (man_id == 0x41) {
+	} else if (man_id == 0x41) {
 		if ((dev_id & 0xF0) == 0x30)
 			type_name = "adm1023";
 		else if ((dev_id & 0xF0) == 0x00)
@@ -395,13 +405,18 @@ static int adm1021_detect(struct i2c_client *client,
 
 		/*
 		 * LM84 Mfr ID is in a different place,
-		 * and it has more unused bits.
+		 * and it has more unused bits. Registers at 0xfe and 0xff
+		 * are undefined and return the most recently read value,
+		 * here the value of the configuration register.
 		 */
 		if (conv_rate == 0x00
+		    && man_id == config && dev_id == config
 		    && (config & 0x7F) == 0x00
 		    && (status & 0xAB) == 0x00) {
 			type_name = "lm84";
 		} else {
+			if ((config & 0x3f) || (status & 0x03))
+				return -ENODEV;
 			/* fail if low limits are larger than high limits */
 			if ((s8)llo > lhi || (s8)rlo > rhi)
 				return -ENODEV;

drivers/hwmon/adm1031.c

@@ -242,9 +242,8 @@ static int FAN_TO_REG(int reg, int div)
 static int AUTO_TEMP_MAX_TO_REG(int val, int reg, int pwm)
 {
 	int ret;
-	int range = val - AUTO_TEMP_MIN_FROM_REG(reg);
+	int range = ((val - AUTO_TEMP_MIN_FROM_REG(reg)) * 10) / (16 - pwm);
 
-	range = ((val - AUTO_TEMP_MIN_FROM_REG(reg))*10)/(16 - pwm);
 	ret = ((reg & 0xf8) |
 	       (range < 10000 ? 0 :
 		range < 20000 ? 1 :

drivers/hwmon/dell-smm-hwmon.c

@@ -113,12 +113,12 @@ MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed (default: autodetect)"
 
 struct smm_regs {
 	unsigned int eax;
-	unsigned int ebx __packed;
-	unsigned int ecx __packed;
-	unsigned int edx __packed;
-	unsigned int esi __packed;
-	unsigned int edi __packed;
-};
+	unsigned int ebx;
+	unsigned int ecx;
+	unsigned int edx;
+	unsigned int esi;
+	unsigned int edi;
+} __packed;
 
 static const char * const temp_labels[] = {
 	"CPU",
@@ -449,13 +449,12 @@ static int i8k_get_power_status(void)
  * Procfs interface
  */
 
-static int
-i8k_ioctl_unlocked(struct file *fp, struct dell_smm_data *data, unsigned int cmd, unsigned long arg)
+static long i8k_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
 {
-	int val = 0;
-	int speed, err;
-	unsigned char buff[16];
+	struct dell_smm_data *data = PDE_DATA(file_inode(fp));
 	int __user *argp = (int __user *)arg;
+	int speed, err;
+	int val = 0;
 
 	if (!argp)
 		return -EINVAL;
@@ -468,15 +467,19 @@ i8k_ioctl_unlocked(struct file *fp, struct dell_smm_data *data, unsigned int cmd
 
 		val = (data->bios_version[0] << 16) |
 				(data->bios_version[1] << 8) | data->bios_version[2];
-		break;
 
+		if (copy_to_user(argp, &val, sizeof(val)))
+			return -EFAULT;
+
+		return 0;
 	case I8K_MACHINE_ID:
 		if (restricted && !capable(CAP_SYS_ADMIN))
 			return -EPERM;
 
-		strscpy_pad(buff, data->bios_machineid, sizeof(buff));
-		break;
+		if (copy_to_user(argp, data->bios_machineid, sizeof(data->bios_machineid)))
+			return -EFAULT;
 
+		return 0;
 	case I8K_FN_STATUS:
 		val = i8k_get_fn_status();
 		break;
@@ -513,11 +516,13 @@ i8k_ioctl_unlocked(struct file *fp, struct dell_smm_data *data, unsigned int cmd
 		if (copy_from_user(&speed, argp + 1, sizeof(int)))
 			return -EFAULT;
 
+		mutex_lock(&data->i8k_mutex);
 		err = i8k_set_fan(data, val, speed);
 		if (err < 0)
-			return err;
-
+			val = err;
+		else
 			val = i8k_get_fan_status(data, val);
+		mutex_unlock(&data->i8k_mutex);
 		break;
 
 	default:
@@ -527,39 +532,12 @@ i8k_ioctl_unlocked(struct file *fp, struct dell_smm_data *data, unsigned int cmd
 	if (val < 0)
 		return val;
 
-	switch (cmd) {
-	case I8K_BIOS_VERSION:
-		if (copy_to_user(argp, &val, 4))
-			return -EFAULT;
-
-		break;
-	case I8K_MACHINE_ID:
-		if (copy_to_user(argp, buff, 16))
-			return -EFAULT;
-
-		break;
-	default:
 	if (copy_to_user(argp, &val, sizeof(int)))
 		return -EFAULT;
 
-		break;
-	}
-
 	return 0;
 }
 
-static long i8k_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
-{
-	struct dell_smm_data *data = PDE_DATA(file_inode(fp));
-	long ret;
-
-	mutex_lock(&data->i8k_mutex);
-	ret = i8k_ioctl_unlocked(fp, data, cmd, arg);
-	mutex_unlock(&data->i8k_mutex);
-
-	return ret;
-}
-
 /*
  * Print the information for /proc/i8k.
  */

drivers/hwmon/f71882fg.c

@@ -49,6 +49,7 @@
 #define SIO_F81768D_ID		0x1210	/* Chipset ID */
 #define SIO_F81865_ID		0x0704	/* Chipset ID */
 #define SIO_F81866_ID		0x1010	/* Chipset ID */
+#define SIO_F81966_ID		0x1502	/* Chipset ID */
 
 #define REGION_LENGTH		8
 #define ADDR_REG_OFFSET		5
@@ -2672,6 +2673,7 @@ static int __init f71882fg_find(int sioaddr, struct f71882fg_sio_data *sio_data)
 		sio_data->type = f81865f;
 		break;
 	case SIO_F81866_ID:
+	case SIO_F81966_ID:
 		sio_data->type = f81866a;
 		break;
 	default:

drivers/hwmon/jc42.c

@@ -137,6 +137,9 @@ static const unsigned short normal_i2c[] = {
 #define CAT34TS04_DEVID		0x2200
 #define CAT34TS04_DEVID_MASK	0xfff0
 
+#define N34TS04_DEVID		0x2230
+#define N34TS04_DEVID_MASK	0xfff0
+
 /* ST Microelectronics */
 #define STTS424_DEVID		0x0101
 #define STTS424_DEVID_MASK	0xffff
@@ -181,6 +184,7 @@ static struct jc42_chips jc42_chips[] = {
 	{ ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK },
 	{ ONS_MANID, CAT34TS02C_DEVID, CAT34TS02C_DEVID_MASK },
 	{ ONS_MANID, CAT34TS04_DEVID, CAT34TS04_DEVID_MASK },
+	{ ONS_MANID, N34TS04_DEVID, N34TS04_DEVID_MASK },
 	{ NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
 	{ STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
 	{ STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },

drivers/hwmon/k10temp.c

@@ -76,26 +76,6 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
 #define ZEN_CUR_TEMP_SHIFT			21
 #define ZEN_CUR_TEMP_RANGE_SEL_MASK		BIT(19)
 
-#define ZEN_SVI_BASE				0x0005A000
-
-/* F17h thermal registers through SMN */
-#define F17H_M01H_SVI_TEL_PLANE0		(ZEN_SVI_BASE + 0xc)
-#define F17H_M01H_SVI_TEL_PLANE1		(ZEN_SVI_BASE + 0x10)
-#define F17H_M31H_SVI_TEL_PLANE0		(ZEN_SVI_BASE + 0x14)
-#define F17H_M31H_SVI_TEL_PLANE1		(ZEN_SVI_BASE + 0x10)
-
-#define F17H_M01H_CFACTOR_ICORE			1000000	/* 1A / LSB	*/
-#define F17H_M01H_CFACTOR_ISOC			250000	/* 0.25A / LSB	*/
-#define F17H_M31H_CFACTOR_ICORE			1000000	/* 1A / LSB	*/
-#define F17H_M31H_CFACTOR_ISOC			310000	/* 0.31A / LSB	*/
-
-/* F19h thermal registers through SMN */
-#define F19H_M01_SVI_TEL_PLANE0			(ZEN_SVI_BASE + 0x14)
-#define F19H_M01_SVI_TEL_PLANE1			(ZEN_SVI_BASE + 0x10)
-
-#define F19H_M01H_CFACTOR_ICORE			1000000	/* 1A / LSB	*/
-#define F19H_M01H_CFACTOR_ISOC			310000	/* 0.31A / LSB	*/
-
 struct k10temp_data {
 	struct pci_dev *pdev;
 	void (*read_htcreg)(struct pci_dev *pdev, u32 *regval);
@@ -191,6 +171,10 @@ static const char *k10temp_temp_label[] = {
 	"Tccd6",
 	"Tccd7",
 	"Tccd8",
+	"Tccd9",
+	"Tccd10",
+	"Tccd11",
+	"Tccd12",
 };
 
 static int k10temp_read_labels(struct device *dev,
@@ -226,7 +210,7 @@ static int k10temp_read_temp(struct device *dev, u32 attr, int channel,
 			if (*val < 0)
 				*val = 0;
 			break;
-		case 2 ... 9:		/* Tccd{1-8} */
+		case 2 ... 13:		/* Tccd{1-12} */
 			amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
 				     ZEN_CCD_TEMP(data->ccd_offset, channel - 2),
 						  &regval);
@@ -361,6 +345,10 @@ static const struct hwmon_channel_info *k10temp_info[] = {
 			   HWMON_T_INPUT | HWMON_T_LABEL,
 			   HWMON_T_INPUT | HWMON_T_LABEL,
 			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
 			   HWMON_T_INPUT | HWMON_T_LABEL),
 	NULL
 };
@@ -457,6 +445,11 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 			data->ccd_offset = 0x300;
 			k10temp_get_ccd_support(pdev, data, 8);
 			break;
+		case 0x10 ... 0x1f:
+		case 0xa0 ... 0xaf:
+			data->ccd_offset = 0x300;
+			k10temp_get_ccd_support(pdev, data, 12);
+			break;
 		}
 	} else {
 		data->read_htcreg = read_htcreg_pci;
@@ -497,6 +490,7 @@ static const struct pci_device_id k10temp_id_table[] = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_DF_F3) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M10H_DF_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F3) },
 	{ PCI_VDEVICE(HYGON, PCI_DEVICE_ID_AMD_17H_DF_F3) },

drivers/hwmon/mr75203.c

@@ -93,7 +93,7 @@
 #define VM_CH_REQ	BIT(21)
 
 #define IP_TMR			0x05
-#define POWER_DELAY_CYCLE_256	0x80
+#define POWER_DELAY_CYCLE_256	0x100
 #define POWER_DELAY_CYCLE_64	0x40
 
 #define PVT_POLL_DELAY_US	20

drivers/hwmon/nct6775.c

@@ -3154,10 +3154,8 @@ store_speed_tolerance(struct device *dev, struct device_attribute *attr,
 	if (err < 0)
 		return err;
 
-	high = fan_from_reg16(data->target_speed[nr],
-			      data->fan_div[nr]) + val;
-	low = fan_from_reg16(data->target_speed[nr],
-			     data->fan_div[nr]) - val;
+	high = fan_from_reg16(data->target_speed[nr], data->fan_div[nr]) + val;
+	low = fan_from_reg16(data->target_speed[nr], data->fan_div[nr]) - val;
 	if (low <= 0)
 		low = 1;
 	if (high < low)
@@ -4995,11 +4993,13 @@ static const char * const asus_wmi_boards[] = {
 	"ROG CROSSHAIR VIII FORMULA",
 	"ROG CROSSHAIR VIII HERO",
 	"ROG CROSSHAIR VIII IMPACT",
+	"ROG STRIX B550-A GAMING",
 	"ROG STRIX B550-E GAMING",
 	"ROG STRIX B550-F GAMING",
 	"ROG STRIX B550-F GAMING (WI-FI)",
 	"ROG STRIX B550-I GAMING",
 	"ROG STRIX X570-F GAMING",
+	"ROG STRIX X570-I GAMING",
 	"ROG STRIX Z390-E GAMING",
 	"ROG STRIX Z490-I GAMING",
 	"TUF GAMING B550M-PLUS",
@@ -5038,7 +5038,7 @@ static int __init sensors_nct6775_init(void)
 				   board_name);
 		if (err >= 0) {
 			/* if reading chip id via WMI succeeds, use WMI */
-			if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp)) {
+			if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) {
 				pr_info("Using Asus WMI to access %#x chip.\n", tmp);
 				access = access_asuswmi;
 			} else {

drivers/hwmon/pmbus/Kconfig

@@ -66,6 +66,16 @@ config SENSORS_BPA_RS600
 	  This driver can also be built as a module. If so, the module will
 	  be called bpa-rs600.
 
+config SENSORS_DELTA_AHE50DC_FAN
+	tristate "Delta AHE-50DC fan control module"
+	help
+	  If you say yes here you get hardware monitoring support for
+	  the integrated fan control module of the Delta AHE-50DC
+	  Open19 power shelf.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called delta-ahe50dc-fan.
+
 config SENSORS_FSP_3Y
 	tristate "FSP/3Y-Power power supplies"
 	help
@@ -123,14 +133,20 @@ config SENSORS_IR36021
 	  be called ir36021.
 
 config SENSORS_IR38064
-	tristate "Infineon IR38064"
+	tristate "Infineon IR38064 and compatibles"
 	help
 	  If you say yes here you get hardware monitoring support for Infineon
-	  IR38064.
+	  IR38060, IR38064, IR38164 and IR38263.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called ir38064.
 
+config SENSORS_IR38064_REGULATOR
+	bool "Regulator support for IR38064 and compatibles"
+	depends on SENSORS_IR38064 && REGULATOR
+	help
+	  Uses the IR38064 or compatible as regulator.
+
 config SENSORS_IRPS5401
 	tristate "Infineon IRPS5401"
 	help
@@ -276,6 +292,15 @@ config SENSORS_MP2975
 	  This driver can also be built as a module. If so, the module will
 	  be called mp2975.
 
+config SENSORS_MP5023
+	tristate "MPS MP5023"
+	help
+	  If you say yes here you get hardware monitoring support for MPS
+	  MP5023.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called mp5023.
+
 config SENSORS_PIM4328
 	tristate "Flex PIM4328 and compatibles"
 	help

drivers/hwmon/pmbus/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_SENSORS_ADM1266)	+= adm1266.o
 obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
 obj-$(CONFIG_SENSORS_BEL_PFE)	+= bel-pfe.o
 obj-$(CONFIG_SENSORS_BPA_RS600)	+= bpa-rs600.o
+obj-$(CONFIG_SENSORS_DELTA_AHE50DC_FAN) += delta-ahe50dc-fan.o
 obj-$(CONFIG_SENSORS_FSP_3Y)	+= fsp-3y.o
 obj-$(CONFIG_SENSORS_IBM_CFFPS)	+= ibm-cffps.o
 obj-$(CONFIG_SENSORS_DPS920AB)	+= dps920ab.o
@@ -31,6 +32,7 @@ obj-$(CONFIG_SENSORS_MAX34440)	+= max34440.o
 obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
 obj-$(CONFIG_SENSORS_MP2888)	+= mp2888.o
 obj-$(CONFIG_SENSORS_MP2975)	+= mp2975.o
+obj-$(CONFIG_SENSORS_MP5023)	+= mp5023.o
 obj-$(CONFIG_SENSORS_PM6764TR)	+= pm6764tr.o
 obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
 obj-$(CONFIG_SENSORS_Q54SJ108A2)	+= q54sj108a2.o

drivers/hwmon/pmbus/delta-ahe50dc-fan.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Delta AHE-50DC power shelf fan control module driver
+ *
+ * Copyright 2021 Zev Weiss <zev@bewilderbeest.net>
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+
+#include "pmbus.h"
+
+#define AHE50DC_PMBUS_READ_TEMP4 0xd0
+
+static int ahe50dc_fan_read_word_data(struct i2c_client *client, int page, int phase, int reg)
+{
+	/* temp1 in (virtual) page 1 is remapped to mfr-specific temp4 */
+	if (page == 1) {
+		if (reg == PMBUS_READ_TEMPERATURE_1)
+			return i2c_smbus_read_word_data(client, AHE50DC_PMBUS_READ_TEMP4);
+		return -EOPNOTSUPP;
+	}
+
+	/*
+	 * There's a fairly limited set of commands this device actually
+	 * supports, so here we block attempts to read anything else (which
+	 * return 0xffff and would cause confusion elsewhere).
+	 */
+	switch (reg) {
+	case PMBUS_STATUS_WORD:
+	case PMBUS_FAN_COMMAND_1:
+	case PMBUS_FAN_COMMAND_2:
+	case PMBUS_FAN_COMMAND_3:
+	case PMBUS_FAN_COMMAND_4:
+	case PMBUS_STATUS_FAN_12:
+	case PMBUS_STATUS_FAN_34:
+	case PMBUS_READ_VIN:
+	case PMBUS_READ_TEMPERATURE_1:
+	case PMBUS_READ_TEMPERATURE_2:
+	case PMBUS_READ_TEMPERATURE_3:
+	case PMBUS_READ_FAN_SPEED_1:
+	case PMBUS_READ_FAN_SPEED_2:
+	case PMBUS_READ_FAN_SPEED_3:
+	case PMBUS_READ_FAN_SPEED_4:
+		return -ENODATA;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static struct pmbus_driver_info ahe50dc_fan_info = {
+	.pages = 2,
+	.format[PSC_FAN] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.m[PSC_FAN] = 1,
+	.b[PSC_FAN] = 0,
+	.R[PSC_FAN] = 0,
+	.m[PSC_TEMPERATURE] = 1,
+	.b[PSC_TEMPERATURE] = 0,
+	.R[PSC_TEMPERATURE] = 1,
+	.m[PSC_VOLTAGE_IN] = 1,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = 3,
+	.func[0] = PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
+		PMBUS_HAVE_VIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_FAN34 |
+		PMBUS_HAVE_STATUS_FAN12 | PMBUS_HAVE_STATUS_FAN34 | PMBUS_PAGE_VIRTUAL,
+	.func[1] = PMBUS_HAVE_TEMP | PMBUS_PAGE_VIRTUAL,
+	.read_word_data = ahe50dc_fan_read_word_data,
+};
+
+/*
+ * CAPABILITY returns 0xff, which appears to be this device's way indicating
+ * it doesn't support something (and if we enable I2C_CLIENT_PEC on seeing bit
+ * 7 being set it generates bad PECs, so let's not go there).
+ */
+static struct pmbus_platform_data ahe50dc_fan_data = {
+	.flags = PMBUS_NO_CAPABILITY,
+};
+
+static int ahe50dc_fan_probe(struct i2c_client *client)
+{
+	client->dev.platform_data = &ahe50dc_fan_data;
+	return pmbus_do_probe(client, &ahe50dc_fan_info);
+}
+
+static const struct i2c_device_id ahe50dc_fan_id[] = {
+	{ "ahe50dc_fan" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ahe50dc_fan_id);
+
+static const struct of_device_id __maybe_unused ahe50dc_fan_of_match[] = {
+	{ .compatible = "delta,ahe50dc-fan" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ahe50dc_fan_of_match);
+
+static struct i2c_driver ahe50dc_fan_driver = {
+	.driver = {
+		   .name = "ahe50dc_fan",
+		   .of_match_table = of_match_ptr(ahe50dc_fan_of_match),
+	},
+	.probe_new = ahe50dc_fan_probe,
+	.id_table = ahe50dc_fan_id,
+};
+module_i2c_driver(ahe50dc_fan_driver);
+
+MODULE_AUTHOR("Zev Weiss <zev@bewilderbeest.net>");
+MODULE_DESCRIPTION("Driver for Delta AHE-50DC power shelf fan control module");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);

drivers/hwmon/pmbus/ir38064.c

@@ -16,8 +16,16 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/driver.h>
 #include "pmbus.h"
 
+#if IS_ENABLED(CONFIG_SENSORS_IR38064_REGULATOR)
+static const struct regulator_desc ir38064_reg_desc[] = {
+	PMBUS_REGULATOR("vout", 0),
+};
+#endif /* CONFIG_SENSORS_IR38064_REGULATOR */
+
 static struct pmbus_driver_info ir38064_info = {
 	.pages = 1,
 	.format[PSC_VOLTAGE_IN] = linear,
@@ -33,6 +41,10 @@ static struct pmbus_driver_info ir38064_info = {
 	    | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
 	    | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
 	    | PMBUS_HAVE_POUT,
+#if IS_ENABLED(CONFIG_SENSORS_IR38064_REGULATOR)
+	.num_regulators = 1,
+	.reg_desc = ir38064_reg_desc,
+#endif
 };
 
 static int ir38064_probe(struct i2c_client *client)
@@ -41,16 +53,30 @@ static int ir38064_probe(struct i2c_client *client)
 }
 
 static const struct i2c_device_id ir38064_id[] = {
+	{"ir38060", 0},
 	{"ir38064", 0},
+	{"ir38164", 0},
+	{"ir38263", 0},
 	{}
 };
 
 MODULE_DEVICE_TABLE(i2c, ir38064_id);
 
+static const struct of_device_id ir38064_of_match[] = {
+	{ .compatible = "infineon,ir38060" },
+	{ .compatible = "infineon,ir38064" },
+	{ .compatible = "infineon,ir38164" },
+	{ .compatible = "infineon,ir38263" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, ir38064_of_match);
+
 /* This is the driver that will be inserted */
 static struct i2c_driver ir38064_driver = {
 	.driver = {
 		   .name = "ir38064",
+		   .of_match_table = of_match_ptr(ir38064_of_match),
 		   },
 	.probe_new = ir38064_probe,
 	.id_table = ir38064_id,
@@ -59,6 +85,6 @@ static struct i2c_driver ir38064_driver = {
 module_i2c_driver(ir38064_driver);
 
 MODULE_AUTHOR("Maxim Sloyko <maxims@google.com>");
-MODULE_DESCRIPTION("PMBus driver for Infineon IR38064");
+MODULE_DESCRIPTION("PMBus driver for Infineon IR38064 and compatible chips");
 MODULE_LICENSE("GPL");
 MODULE_IMPORT_NS(PMBUS);

drivers/hwmon/pmbus/mp5023.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for MPS MP5023 Hot-Swap Controller
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info mp5023_info = {
+	.pages = 1,
+
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_CURRENT_OUT] = direct,
+	.format[PSC_POWER] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+
+	.m[PSC_VOLTAGE_IN] = 32,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = 0,
+	.m[PSC_VOLTAGE_OUT] = 32,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = 0,
+	.m[PSC_CURRENT_OUT] = 16,
+	.b[PSC_CURRENT_OUT] = 0,
+	.R[PSC_CURRENT_OUT] = 0,
+	.m[PSC_POWER] = 1,
+	.b[PSC_POWER] = 0,
+	.R[PSC_POWER] = 0,
+	.m[PSC_TEMPERATURE] = 2,
+	.b[PSC_TEMPERATURE] = 0,
+	.R[PSC_TEMPERATURE] = 0,
+
+	.func[0] =
+		PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_PIN |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_IOUT |
+		PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int mp5023_probe(struct i2c_client *client)
+{
+	return pmbus_do_probe(client, &mp5023_info);
+}
+
+static const struct of_device_id __maybe_unused mp5023_of_match[] = {
+	{ .compatible = "mps,mp5023", },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, mp5023_of_match);
+
+static struct i2c_driver mp5023_driver = {
+	.driver = {
+		   .name = "mp5023",
+		   .of_match_table = of_match_ptr(mp5023_of_match),
+	},
+	.probe_new = mp5023_probe,
+};
+
+module_i2c_driver(mp5023_driver);
+
+MODULE_AUTHOR("Howard Chiu <howard.chiu@quantatw.com>");
+MODULE_DESCRIPTION("PMBus driver for MPS MP5023 HSC");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);

drivers/hwmon/raspberrypi-hwmon.c

@@ -120,6 +120,8 @@ static int rpi_hwmon_probe(struct platform_device *pdev)
 							       data,
 							       &rpi_chip_info,
 							       NULL);
+	if (IS_ERR(data->hwmon_dev))
+		return PTR_ERR(data->hwmon_dev);
 
 	ret = devm_delayed_work_autocancel(dev, &data->get_values_poll_work,
 					   get_values_poll);
@@ -127,10 +129,9 @@ static int rpi_hwmon_probe(struct platform_device *pdev)
 		return ret;
 	platform_set_drvdata(pdev, data);
 
-	if (!PTR_ERR_OR_ZERO(data->hwmon_dev))
 	schedule_delayed_work(&data->get_values_poll_work, 2 * HZ);
 
-	return PTR_ERR_OR_ZERO(data->hwmon_dev);
+	return 0;
 }
 
 static struct platform_driver rpi_hwmon_driver = {

drivers/hwmon/sht4x.c

@@ -281,9 +281,16 @@ static const struct i2c_device_id sht4x_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, sht4x_id);
 
+static const struct of_device_id sht4x_of_match[] = {
+	{ .compatible = "sensirion,sht4x" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sht4x_of_match);
+
 static struct i2c_driver sht4x_driver = {
 	.driver = {
 		.name = "sht4x",
+		.of_match_table = sht4x_of_match,
 	},
 	.probe		= sht4x_probe,
 	.id_table	= sht4x_id,

drivers/hwmon/xgene-hwmon.c

@@ -659,8 +659,10 @@ static int xgene_hwmon_probe(struct platform_device *pdev)
 
 		acpi_id = acpi_match_device(pdev->dev.driver->acpi_match_table,
 					    &pdev->dev);
-		if (!acpi_id)
-			return -EINVAL;
+		if (!acpi_id) {
+			rc = -EINVAL;
+			goto out_mbox_free;
+		}
 
 		version = (int)acpi_id->driver_data;
 

include/linux/hwmon.h

@@ -403,7 +403,7 @@ struct hwmon_ops {
 };
 
 /**
- * Channel information
+ * struct hwmon_channel_info - Channel information
  * @type:	Channel type.
  * @config:	Pointer to NULL-terminated list of channel parameters.
  *		Use for per-channel attributes.
@@ -422,7 +422,7 @@ struct hwmon_channel_info {
 	})
 
 /**
- * Chip configuration
+ * struct hwmon_chip_info - Chip configuration
  * @ops:	Pointer to hwmon operations.
  * @info:	Null-terminated list of channel information.
  */

include/linux/pci_ids.h

@@ -555,6 +555,7 @@
 #define PCI_DEVICE_ID_AMD_17H_M60H_DF_F3 0x144b
 #define PCI_DEVICE_ID_AMD_17H_M70H_DF_F3 0x1443
 #define PCI_DEVICE_ID_AMD_19H_DF_F3	0x1653
+#define PCI_DEVICE_ID_AMD_19H_M10H_DF_F3 0x14b0
 #define PCI_DEVICE_ID_AMD_19H_M40H_DF_F3 0x167c
 #define PCI_DEVICE_ID_AMD_19H_M50H_DF_F3 0x166d
 #define PCI_DEVICE_ID_AMD_CNB17H_F3	0x1703

include/linux/platform_data/ntc_thermistor.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * ntc_thermistor.h - NTC Thermistors
- *
- *  Copyright (C) 2010 Samsung Electronics
- *  MyungJoo Ham <myungjoo.ham@samsung.com>
- */
-#ifndef _LINUX_NTC_H
-#define _LINUX_NTC_H
-
-struct iio_channel;
-
-enum ntc_thermistor_type {
-	TYPE_B57330V2103,
-	TYPE_B57891S0103,
-	TYPE_NCPXXWB473,
-	TYPE_NCPXXWF104,
-	TYPE_NCPXXWL333,
-	TYPE_NCPXXXH103,
-};
-
-struct ntc_thermistor_platform_data {
-	/*
-	 * One (not both) of read_uV and read_ohm should be provided and only
-	 * one of the two should be provided.
-	 * Both functions should return negative value for an error case.
-	 *
-	 * pullup_uV, pullup_ohm, pulldown_ohm, and connect are required to use
-	 * read_uV()
-	 *
-	 * How to setup pullup_ohm, pulldown_ohm, and connect is
-	 * described at Documentation/hwmon/ntc_thermistor.rst
-	 *
-	 * pullup/down_ohm: 0 for infinite / not-connected
-	 *
-	 * chan: iio_channel pointer to communicate with the ADC which the
-	 * thermistor is using for conversion of the analog values.
-	 */
-	int (*read_uv)(struct ntc_thermistor_platform_data *);
-	unsigned int pullup_uv;
-
-	unsigned int pullup_ohm;
-	unsigned int pulldown_ohm;
-	enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect;
-	struct iio_channel *chan;
-
-	int (*read_ohm)(void);
-};
-
-#endif /* _LINUX_NTC_H */