[netdrvr sis900] add suspend/resume support

The attached patch adds support for suspend/resume to the sis900 driver.
With this patch on resume the NIC is fully configured and operational,
before a module reload was needed because of the complete lack of
suspend/resume callbacks.

I added two functions, sis900_suspend and sis900_resume, with their
pointers in struct pci_driver. A vector of 16 u32 was then needed to the
to keep PCI data during suspend. I added it in struct sis900_private.
I updated the revision number to reflect my changes. 
Looking at the code I also killed three typos.

The patch doesn't touch any other code.

Since I don't know anything on ethernet drivers the rule 'works for me'
is fully valid.

drivers/net/sis900.c

@@ -18,6 +18,7 @@
    preliminary Rev. 1.0 Jan. 18, 1998
    http://www.sis.com.tw/support/databook.htm
 
+   Rev 1.08.07 Nov.  2 2003 Daniele Venzano <webvenza@libero.it> add suspend/resume support
    Rev 1.08.06 Sep. 24 2002 Mufasa Yang bug fix for Tx timeout & add SiS963 support
    Rev 1.08.05 Jun.  6 2002 Mufasa Yang bug fix for read_eeprom & Tx descriptor over-boundary
    Rev 1.08.04 Apr. 25 2002 Mufasa Yang <mufasa@sis.com.tw> added SiS962 support
@@ -72,7 +73,7 @@
 #include "sis900.h"
 
 #define SIS900_MODULE_NAME "sis900"
-#define SIS900_DRV_VERSION "v1.08.06 9/24/2002"
+#define SIS900_DRV_VERSION "v1.08.07 11/02/2003"
 
 static char version[] __devinitdata =
 KERN_INFO "sis900.c: " SIS900_DRV_VERSION "\n";
@@ -169,6 +170,7 @@ struct sis900_private {
 
 	unsigned int tx_full;			/* The Tx queue is full.    */
 	u8 host_bridge_rev;
+	u32 pci_state[16];
 };
 
 MODULE_AUTHOR("Jim Huang <cmhuang@sis.com.tw>, Ollie Lho <ollie@sis.com.tw>");
@@ -305,7 +307,7 @@ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev, struct net_de
 		*( ((u16 *)net_dev->dev_addr) + i) = inw(ioaddr + rfdr);
 	}
 
-	/* enable packet filitering */
+	/* enable packet filtering */
 	outl(rfcrSave | RFEN, rfcr + ioaddr);
 
 	return 1;
@@ -994,7 +996,7 @@ sis900_init_rxfilter (struct net_device * net_dev)
 		}
 	}
 
-	/* enable packet filitering */
+	/* enable packet filtering */
 	outl(rfcrSave | RFEN, rfcr + ioaddr);
 }
 
@@ -1466,7 +1468,7 @@ static void sis900_tx_timeout(struct net_device *net_dev)
  *	@net_dev: the net device to transmit with
  *
  *	Set the transmit buffer descriptor, 
- *	and write TxENA to enable transimt state machine.
+ *	and write TxENA to enable transmit state machine.
  *	tell upper layer if the buffer is full
  */
 
@@ -2184,11 +2186,72 @@ static void __devexit sis900_remove(struct pci_dev *pci_dev)
 	pci_set_drvdata(pci_dev, NULL);
 }
 
+#ifdef CONFIG_PM
+
+static int sis900_suspend(struct pci_dev *pci_dev, u32 state)
+{
+	struct net_device *net_dev = pci_get_drvdata(pci_dev);
+	struct sis900_private *sis_priv = net_dev->priv;
+	long ioaddr = net_dev->base_addr;
+
+	if(!netif_running(net_dev))
+		return 0;
+
+	netif_stop_queue(net_dev);
+
+	/* Stop the chip's Tx and Rx Status Machine */
+	outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr);
+
+	pci_set_power_state(pci_dev, 3);
+	pci_save_state(pci_dev, sis_priv->pci_state);
+
+	return 0;
+}
+
+static int sis900_resume(struct pci_dev *pci_dev)
+{
+	struct net_device *net_dev = pci_get_drvdata(pci_dev);
+	struct sis900_private *sis_priv = net_dev->priv;
+	long ioaddr = net_dev->base_addr;
+
+	if(!netif_running(net_dev))
+		return 0;
+	pci_restore_state(pci_dev, sis_priv->pci_state);
+	pci_set_power_state(pci_dev, 0);
+
+	sis900_init_rxfilter(net_dev);
+
+	sis900_init_tx_ring(net_dev);
+	sis900_init_rx_ring(net_dev);
+
+	set_rx_mode(net_dev);
+
+	netif_device_attach(net_dev);
+	netif_start_queue(net_dev);
+
+	/* Workaround for EDB */
+	sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
+
+	/* Enable all known interrupts by setting the interrupt mask. */
+	outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr);
+	outl(RxENA | inl(ioaddr + cr), ioaddr + cr);
+	outl(IE, ioaddr + ier);
+
+	sis900_check_mode(net_dev, sis_priv->mii);
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
 static struct pci_driver sis900_pci_driver = {
 	.name		= SIS900_MODULE_NAME,
 	.id_table	= sis900_pci_tbl,
 	.probe		= sis900_probe,
 	.remove		= __devexit_p(sis900_remove),
+#ifdef CONFIG_PM
+	.suspend	= sis900_suspend,
+	.resume		= sis900_resume,
+#endif /* CONFIG_PM */
 };
 
 static int __init sis900_init_module(void)