Commit 4abf6f8b authored by Justin P. Mattock's avatar Justin P. Mattock Committed by Greg Kroah-Hartman

drivers:staging:iio Fix typos and comments in staging iio.

The below patch fixes some comments and some typos that I have found
while reading drivers/staging/iio/*
Signed-off-by: default avatarJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 92a62532
......@@ -62,7 +62,7 @@ Then fill in the following:
An optional associated buffer.
- indio_dev->pollfunc:
Poll function related elements. This controls what occurs when a trigger
to which this device is attached sends and event.
to which this device is attached sends an event.
- indio_dev->channels:
Specification of device channels. Most attributes etc are built
form this spec.
......
......@@ -86,7 +86,7 @@ config IIO_SIMPLE_DUMMY
help
Driver intended mainly as documentation for how to write
a driver. May also be useful for testing userspace code
without hardward.
without hardware.
if IIO_SIMPLE_DUMMY
......
......@@ -239,7 +239,7 @@ static int lis3l02dq_data_rdy_trigger_set_state(struct iio_trigger *trig,
__lis3l02dq_write_data_ready_config(&indio_dev->dev, state);
if (state == false) {
/*
* A possible quirk with teh handler is currently worked around
* A possible quirk with the handler is currently worked around
* by ensuring outstanding read events are cleared.
*/
ret = lis3l02dq_read_all(indio_dev, NULL);
......
......@@ -136,7 +136,7 @@
#define SCA3000_INT_MASK_ACTIVE_HIGH 0x01
#define SCA3000_INT_MASK_ACTIVE_LOW 0x00
/* Values of mulipexed registers (write to ctrl_data after select) */
/* Values of multiplexed registers (write to ctrl_data after select) */
#define SCA3000_REG_ADDR_CTRL_DATA 0x22
/* Measurement modes available on some sca3000 series chips. Code assumes others
......
......@@ -23,7 +23,7 @@
/**
* ad7476_ring_preenable() setup the parameters of the ring before enabling
*
* The complex nature of the setting of the nuber of bytes per datum is due
* The complex nature of the setting of the number of bytes per datum is due
* to this driver currently ensuring that the timestamp is stored at an 8
* byte boundary.
**/
......
......@@ -26,7 +26,7 @@
/**
* ad799x_ring_preenable() setup the parameters of the ring before enabling
*
* The complex nature of the setting of the nuber of bytes per datum is due
* The complex nature of the setting of the number of bytes per datum is due
* to this driver currently ensuring that the timestamp is stored at an 8
* byte boundary.
**/
......
......@@ -341,7 +341,7 @@ static struct iio_chan_spec max1361_channels[] =
static struct iio_chan_spec max1363_channels[] =
MAX1363_4X_CHANS(12, MAX1363_EV_M);
/* Appies to max1236, max1237 */
/* Applies to max1236, max1237 */
static const enum max1363_modes max1236_mode_list[] = {
_s0, _s1, _s2, _s3,
s0to1, s0to2, s0to3,
......
......@@ -334,7 +334,7 @@ static int __devinit ad5446_probe(struct spi_device *spi)
st->reg = reg;
st->spi = spi;
/* Estabilish that the iio_dev is a child of the spi device */
/* Establish that the iio_dev is a child of the spi device */
indio_dev->dev.parent = &spi->dev;
indio_dev->name = spi_get_device_id(spi)->name;
if (st->chip_info->store_pwr_down)
......
......@@ -26,7 +26,7 @@ enum iio_data_type {
/* Could add the raw attributes as well - allowing buffer only devices */
enum iio_chan_info_enum {
/* 0 is reserverd for raw attributes */
/* 0 is reserved for raw attributes */
IIO_CHAN_INFO_SCALE = 1,
IIO_CHAN_INFO_OFFSET,
IIO_CHAN_INFO_CALIBSCALE,
......@@ -110,7 +110,7 @@ struct iio_chan_spec_ext_info {
/**
* struct iio_chan_spec - specification of a single channel
* @type: What type of measurement is the channel making.
* @channel: What number or name do we wish to asign the channel.
* @channel: What number or name do we wish to assign the channel.
* @channel2: If there is a second number for a differential
* channel then this is it. If modified is set then the
* value here specifies the modifier.
......@@ -133,7 +133,7 @@ struct iio_chan_spec_ext_info {
* informative name. Note this has no effect codes etc,
* unlike modifiers.
* @datasheet_name: A name used in in kernel mapping of channels. It should
* corrspond to the first name that the channel is referred
* correspond to the first name that the channel is referred
* to by in the datasheet (e.g. IND), or the nearest
* possible compound name (e.g. IND-INC).
* @processed_val: Flag to specify the data access attribute should be
......@@ -243,7 +243,7 @@ struct iio_dev;
* @write_event_config: set if the event is enabled.
* @read_event_value: read a value associated with the event. Meaning
* is event dependant. event_code specifies which event.
* @write_event_value: write the value associate with the event.
* @write_event_value: write the value associated with the event.
* Meaning is event dependent.
* @validate_trigger: function to validate the trigger when the
* current trigger gets changed.
......
......@@ -32,7 +32,7 @@
* @chip: irq chip we are faking
* @base: base of irq range
* @enabled: mask of which irqs are enabled
* @inuse: mask of which irqs actually have anyone connected
* @inuse: mask of which irqs are connected
* @lock: protect the evgen state
*/
struct iio_dummy_eventgen {
......
......@@ -113,7 +113,7 @@ struct taos_lux {
/* This structure is intentionally large to accommodate updates via sysfs. */
/* Sized to 11 = max 10 segments + 1 termination segment */
/* Assumption is is one and only one type of glass used */
/* Assumption is one and only one type of glass used */
static struct taos_lux taos_device_lux[11] = {
{ 9830, 8520, 15729 },
{ 12452, 10807, 23344 },
......
......@@ -86,7 +86,7 @@
#define RATE_NOT_USED 0x07
/*
* Device Configutration
* Device Configuration
*/
#define CONF_NORMAL 0x00
#define CONF_POSITIVE_BIAS 0x01
......@@ -169,7 +169,7 @@ static int hmc5843_read_measurement(struct iio_dev *indio_dev,
/*
* From the datasheet
* 0 - Continuous-Conversion Mode: In continuous-conversion mode, the
* device continuously performs conversions an places the result in the
* device continuously performs conversions and places the result in the
* data register.
*
* 1 - Single-Conversion Mode : device performs a single measurement,
......
......@@ -85,7 +85,7 @@ static irqreturn_t ade7758_trigger_handler(int irq, void *p)
/**
* ade7758_ring_preenable() setup the parameters of the ring before enabling
*
* The complex nature of the setting of the nuber of bytes per datum is due
* The complex nature of the setting of the number of bytes per datum is due
* to this driver currently ensuring that the timestamp is stored at an 8
* byte boundary.
**/
......
......@@ -362,7 +362,7 @@
#define IIO_EVENT_ATTR_CYCEND(_evlist, _show, _store, _mask) \
IIO_EVENT_ATTR_SH(cycend, _evlist, _show, _store, _mask)
/* on the rising and falling edge of the the voltage waveform */
/* on the rising and falling edge of the voltage waveform */
#define IIO_EVENT_ATTR_ZERO_CROSS(_evlist, _show, _store, _mask) \
IIO_EVENT_ATTR_SH(zero_cross, _evlist, _show, _store, _mask)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment