Skip to content

L
linux
Commit 4b7eba49 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'cris-for-linus' of git://jni.nu/cris 

Pull CRIS changes from Jesper Nilsson:
 "No major changes here, but fixes some compile errors for CRIS, some
  small style issues, some documentation and as a bonus nukes a couple
  of obsolete rtc-files and related code."

* tag 'cris-for-linus' of git://jni.nu/cris:
  cris: Remove old legacy "-traditional" flag from arch-v10/lib/Makefile
  CRIS: Remove legacy RTC drivers
  cris/mm/fault.c: Port OOM changes to do_page_fault
  cris:fix the wrong function declear
  CRIS: Add _sdata to vmlinux.lds.S
  cris: posix_types.h, include asm-generic/posix_types.h
  CRIS: Update documentation
  cris/arch-v32: cryptocop: Use kzalloc
  net:removed the unused variable
  cris:removed the unused variable
  CRISv32: Correct name of read_mostly section.
parents 92bf3d09 7b91747d
Show whitespace changes
Inline Side-by-side
Showing with 71 additions and 1138 deletions
Documentation/cris/README
View file @ 4b7eba49
Linux 2.4 on the CRIS architecture
==================================
$Id: README,v 1.7 2001/04/19 12:38:32 bjornw Exp $
Linux on the CRIS architecture
==============================
This is a port of Linux 2.4 to Axis Communications ETRAX 100LX embedded
network CPU. For more information about CRIS and ETRAX please see further
below.
This is a port of Linux to Axis Communications ETRAX 100LX,
ETRAX FS and ARTPEC-3 embedded network CPUs.
For more information about CRIS and ETRAX please see further below.
In order to compile this you need a version of gcc with support for the
ETRAX chip family. Please see this link for more information on how to
download the compiler and other tools useful when building and booting
software for the ETRAX platform:
http://developer.axis.com/doc/software/devboard_lx/install-howto.html
<more specific information should come in this document later>
http://developer.axis.com/wiki/doku.php?id=axis:install-howto-2_20
What is CRIS ?
--------------
CRIS is an acronym for 'Code Reduced Instruction Set'. It is the CPU
architecture in Axis Communication AB's range of embedded network CPU's,
called ETRAX. The latest CPU is called ETRAX 100LX, where LX stands for
'Linux' because the chip was designed to be a good host for the Linux
operating system.
called ETRAX.
The ETRAX 100LX chip
--------------------
For reference, please see the press-release:
For reference, please see the following link:
http://www.axis.com/news/us/001101_etrax.htm
http://www.axis.com/products/dev_etrax_100lx/index.htm
The ETRAX 100LX is a 100 MIPS processor with 8kB cache, MMU, and a very broad
range of built-in interfaces, all with modern scatter/gather DMA.
......@@ -55,16 +51,24 @@ I/O interfaces:
(not all interfaces are available at the same time due to chip pin
multiplexing)
The previous version of the ETRAX, the ETRAX 100, sits in almost all of
Axis shipping thin-servers like the Axis 2100 web camera or the ETRAX 100
developer-board. It lacks an MMU so the Linux we run on that is a version
of uClinux (Linux 2.0 without MM-support) ported to the CRIS architecture.
The new Linux 2.4 port has full MM and needs a CPU with an MMU, so it will
not run on the ETRAX 100.
ETRAX 100LX is CRISv10 architecture.
The ETRAX FS and ARTPEC-3 chips
-------------------------------
The ETRAX FS is a 200MHz 32-bit RISC processor with on-chip 16kB
I-cache and 16kB D-cache and with a wide range of device interfaces
including multiple high speed serial ports and an integrated USB 1.1 PHY.
A version of the Axis developer-board with ETRAX 100LX (running Linux
2.4) is now available. For more information please see developer.axis.com.
The ARTPEC-3 is a variant of the ETRAX FS with additional IO-units
used by the Axis Communications network cameras.
See below link for more information:
http://www.axis.com/products/dev_etrax_fs/index.htm
ETRAX FS and ARTPEC-3 are both CRISv32 architectures.
Bootlog
-------
......@@ -182,10 +186,6 @@ SwapFree: 0 kB
-rwxr-xr-x 1 342 100 16252 Jan 01 00:00 telnetd
(All programs are statically linked to the libc at this point - we have not ported the
shared libraries yet)
......
arch/cris/arch-v10/drivers/ds1302.c deleted 100644 → 0
View file @ 92bf3d09
/*!***************************************************************************
*!
*! FILE NAME : ds1302.c
*!
*! DESCRIPTION: Implements an interface for the DS1302 RTC through Etrax I/O
*!
*! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init
*!
*! ---------------------------------------------------------------------------
*!
*! (C) Copyright 1999-2007 Axis Communications AB, LUND, SWEDEN
*!
*!***************************************************************************/
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/miscdevice.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/bcd.h>
#include <linux/capability.h>
#include <asm/uaccess.h>
#include <arch/svinto.h>
#include <asm/io.h>
#include <asm/rtc.h>
#include <arch/io_interface_mux.h>
#include "i2c.h"
#define RTC_MAJOR_NR 121 /* local major, change later */
static DEFINE_MUTEX(ds1302_mutex);
static const char ds1302_name[] = "ds1302";
/* The DS1302 might be connected to different bits on different products.
* It has three signals - SDA, SCL and RST. RST and SCL are always outputs,
* but SDA can have a selected direction.
* For now, only PORT_PB is hardcoded.
*/
/* The RST bit may be on either the Generic Port or Port PB. */
#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
#define TK_RST_OUT(x) REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, CONFIG_ETRAX_DS1302_RSTBIT, x)
#define TK_RST_DIR(x)
#else
#define TK_RST_OUT(x) REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_DS1302_RSTBIT, x)
#define TK_RST_DIR(x) REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, CONFIG_ETRAX_DS1302_RSTBIT, x)
#endif
#define TK_SDA_OUT(x) REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_DS1302_SDABIT, x)
#define TK_SCL_OUT(x) REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_DS1302_SCLBIT, x)
#define TK_SDA_IN() ((*R_PORT_PB_READ >> CONFIG_ETRAX_DS1302_SDABIT) & 1)
/* 1 is out, 0 is in */
#define TK_SDA_DIR(x) REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, CONFIG_ETRAX_DS1302_SDABIT, x)
#define TK_SCL_DIR(x) REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, CONFIG_ETRAX_DS1302_SCLBIT, x)
/*
* The reason for tempudelay and not udelay is that loops_per_usec
* (used in udelay) is not set when functions here are called from time.c
*/
static void tempudelay(int usecs)
{
volatile int loops;
for(loops = usecs * 12; loops > 0; loops--)
/* nothing */;
}
/* Send 8 bits. */
static void
out_byte(unsigned char x)
{
int i;
TK_SDA_DIR(1);
for (i = 8; i--;) {
/* The chip latches incoming bits on the rising edge of SCL. */
TK_SCL_OUT(0);
TK_SDA_OUT(x & 1);
tempudelay(1);
TK_SCL_OUT(1);
tempudelay(1);
x >>= 1;
}
TK_SDA_DIR(0);
}
static unsigned char
in_byte(void)
{
unsigned char x = 0;
int i;
/* Read byte. Bits come LSB first, on the falling edge of SCL.
* Assume SDA is in input direction already.
*/
TK_SDA_DIR(0);
for (i = 8; i--;) {
TK_SCL_OUT(0);
tempudelay(1);
x >>= 1;
x |= (TK_SDA_IN() << 7);
TK_SCL_OUT(1);
tempudelay(1);
}
return x;
}
/* Prepares for a transaction by de-activating RST (active-low). */
static void
start(void)
{
TK_SCL_OUT(0);
tempudelay(1);
TK_RST_OUT(0);
tempudelay(5);
TK_RST_OUT(1);
}
/* Ends a transaction by taking RST active again. */
static void
stop(void)
{
tempudelay(2);
TK_RST_OUT(0);
}
/* Enable writing. */
static void
ds1302_wenable(void)
{
start();
out_byte(0x8e); /* Write control register */
out_byte(0x00); /* Disable write protect bit 7 = 0 */
stop();
}
/* Disable writing. */
static void
ds1302_wdisable(void)
{
start();
out_byte(0x8e); /* Write control register */
out_byte(0x80); /* Disable write protect bit 7 = 0 */
stop();
}
/* Read a byte from the selected register in the DS1302. */
unsigned char
ds1302_readreg(int reg)
{
unsigned char x;
start();
out_byte(0x81 | (reg << 1)); /* read register */
x = in_byte();
stop();
return x;
}
/* Write a byte to the selected register. */
void
ds1302_writereg(int reg, unsigned char val)
{
#ifndef CONFIG_ETRAX_RTC_READONLY
int do_writereg = 1;
#else
int do_writereg = 0;
if (reg == RTC_TRICKLECHARGER)
do_writereg = 1;
#endif
if (do_writereg) {
ds1302_wenable();
start();
out_byte(0x80 | (reg << 1)); /* write register */
out_byte(val);
stop();
ds1302_wdisable();
}
}
void
get_rtc_time(struct rtc_time *rtc_tm)
{
unsigned long flags;
local_irq_save(flags);
rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
rtc_tm->tm_hour = CMOS_READ(RTC_HOURS);
rtc_tm->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
rtc_tm->tm_mon = CMOS_READ(RTC_MONTH);
rtc_tm->tm_year = CMOS_READ(RTC_YEAR);
local_irq_restore(flags);
rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon);
rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
/*
* Account for differences between how the RTC uses the values
* and how they are defined in a struct rtc_time;
*/
if (rtc_tm->tm_year <= 69)
rtc_tm->tm_year += 100;
rtc_tm->tm_mon--;
}
static unsigned char days_in_mo[] =
{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
/* ioctl that supports RTC_RD_TIME and RTC_SET_TIME (read and set time/date). */
static int rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
unsigned long flags;
switch(cmd) {
case RTC_RD_TIME: /* read the time/date from RTC */
{
struct rtc_time rtc_tm;
memset(&rtc_tm, 0, sizeof (struct rtc_time));
get_rtc_time(&rtc_tm);
if (copy_to_user((struct rtc_time*)arg, &rtc_tm, sizeof(struct rtc_time)))
return -EFAULT;
return 0;
}
case RTC_SET_TIME: /* set the RTC */
{
struct rtc_time rtc_tm;
unsigned char mon, day, hrs, min, sec, leap_yr;
unsigned int yrs;
if (!capable(CAP_SYS_TIME))
return -EPERM;
if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, sizeof(struct rtc_time)))
return -EFAULT;
yrs = rtc_tm.tm_year + 1900;
mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */
day = rtc_tm.tm_mday;
hrs = rtc_tm.tm_hour;
min = rtc_tm.tm_min;
sec = rtc_tm.tm_sec;
if ((yrs < 1970) || (yrs > 2069))
return -EINVAL;
leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
if ((mon > 12) || (day == 0))
return -EINVAL;
if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
return -EINVAL;
if ((hrs >= 24) || (min >= 60) || (sec >= 60))
return -EINVAL;
if (yrs >= 2000)
yrs -= 2000; /* RTC (0, 1, ... 69) */
else
yrs -= 1900; /* RTC (70, 71, ... 99) */
sec = bin2bcd(sec);
min = bin2bcd(min);
hrs = bin2bcd(hrs);
day = bin2bcd(day);
mon = bin2bcd(mon);
yrs = bin2bcd(yrs);
local_irq_save(flags);
CMOS_WRITE(yrs, RTC_YEAR);
CMOS_WRITE(mon, RTC_MONTH);
CMOS_WRITE(day, RTC_DAY_OF_MONTH);
CMOS_WRITE(hrs, RTC_HOURS);
CMOS_WRITE(min, RTC_MINUTES);
CMOS_WRITE(sec, RTC_SECONDS);
local_irq_restore(flags);
/* Notice that at this point, the RTC is updated but
* the kernel is still running with the old time.
* You need to set that separately with settimeofday
* or adjtimex.
*/
return 0;
}
case RTC_SET_CHARGE: /* set the RTC TRICKLE CHARGE register */
{
int tcs_val;
if (!capable(CAP_SYS_TIME))
return -EPERM;
if(copy_from_user(&tcs_val, (int*)arg, sizeof(int)))
return -EFAULT;
tcs_val = RTC_TCR_PATTERN | (tcs_val & 0x0F);
ds1302_writereg(RTC_TRICKLECHARGER, tcs_val);
return 0;
}
case RTC_VL_READ:
{
/* TODO:
* Implement voltage low detection support
*/
printk(KERN_WARNING "DS1302: RTC Voltage Low detection"
" is not supported\n");
return 0;
}
case RTC_VL_CLR:
{
/* TODO:
* Nothing to do since Voltage Low detection is not supported
*/
return 0;
}
default:
return -ENOIOCTLCMD;
}
}
static long rtc_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
int ret;
mutex_lock(&ds1302_mutex);
ret = rtc_ioctl(file, cmd, arg);
mutex_unlock(&ds1302_mutex);
return ret;
}
static void
print_rtc_status(void)
{
struct rtc_time tm;
get_rtc_time(&tm);
/*
* There is no way to tell if the luser has the RTC set for local
* time or for Universal Standard Time (GMT). Probably local though.
*/
printk(KERN_INFO "rtc_time\t: %02d:%02d:%02d\n",
tm.tm_hour, tm.tm_min, tm.tm_sec);
printk(KERN_INFO "rtc_date\t: %04d-%02d-%02d\n",
tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
}
/* The various file operations we support. */
static const struct file_operations rtc_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = rtc_unlocked_ioctl,
.llseek = noop_llseek,
};
/* Probe for the chip by writing something to its RAM and try reading it back. */
#define MAGIC_PATTERN 0x42
static int __init
ds1302_probe(void)
{
int retval, res;
TK_RST_DIR(1);
TK_SCL_DIR(1);
TK_SDA_DIR(0);
/* Try to talk to timekeeper. */
ds1302_wenable();
start();
out_byte(0xc0); /* write RAM byte 0 */
out_byte(MAGIC_PATTERN); /* write something magic */
start();
out_byte(0xc1); /* read RAM byte 0 */
if((res = in_byte()) == MAGIC_PATTERN) {
stop();
ds1302_wdisable();
printk(KERN_INFO "%s: RTC found.\n", ds1302_name);
printk(KERN_INFO "%s: SDA, SCL, RST on PB%i, PB%i, %s%i\n",
ds1302_name,
CONFIG_ETRAX_DS1302_SDABIT,
CONFIG_ETRAX_DS1302_SCLBIT,
#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
"GENIO",
#else
"PB",
#endif
CONFIG_ETRAX_DS1302_RSTBIT);
print_rtc_status();
retval = 1;
} else {
stop();
retval = 0;
}
return retval;
}
/* Just probe for the RTC and register the device to handle the ioctl needed. */
int __init
ds1302_init(void)
{
#ifdef CONFIG_ETRAX_I2C
i2c_init();
#endif
if (!ds1302_probe()) {
#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
#if CONFIG_ETRAX_DS1302_RSTBIT == 27
/*
* The only way to set g27 to output is to enable ATA.
*
* Make sure that R_GEN_CONFIG is setup correct.
*/
/* Allocating the ATA interface will grab almost all
* pins in I/O groups a, b, c and d. A consequence of
* allocating the ATA interface is that the fixed
* interfaces shared RAM, parallel port 0, parallel
* port 1, parallel port W, SCSI-8 port 0, SCSI-8 port
* 1, SCSI-W, serial port 2, serial port 3,
* synchronous serial port 3 and USB port 2 and almost
* all GPIO pins on port g cannot be used.
*/
if (cris_request_io_interface(if_ata, "ds1302/ATA")) {
printk(KERN_WARNING "ds1302: Failed to get IO interface\n");
return -1;
}
#elif CONFIG_ETRAX_DS1302_RSTBIT == 0
if (cris_io_interface_allocate_pins(if_gpio_grp_a,
'g',
CONFIG_ETRAX_DS1302_RSTBIT,
CONFIG_ETRAX_DS1302_RSTBIT)) {
printk(KERN_WARNING "ds1302: Failed to get IO interface\n");
return -1;
}
/* Set the direction of this bit to out. */
genconfig_shadow = ((genconfig_shadow &
~IO_MASK(R_GEN_CONFIG, g0dir)) |
(IO_STATE(R_GEN_CONFIG, g0dir, out)));
*R_GEN_CONFIG = genconfig_shadow;
#endif
if (!ds1302_probe()) {
printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name);
return -1;
}
#else
printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name);
return -1;
#endif
}
/* Initialise trickle charger */
ds1302_writereg(RTC_TRICKLECHARGER,
RTC_TCR_PATTERN |(CONFIG_ETRAX_DS1302_TRICKLE_CHARGE & 0x0F));
/* Start clock by resetting CLOCK_HALT */
ds1302_writereg(RTC_SECONDS, (ds1302_readreg(RTC_SECONDS) & 0x7F));
return 0;
}
static int __init ds1302_register(void)
{
ds1302_init();
if (register_chrdev(RTC_MAJOR_NR, ds1302_name, &rtc_fops)) {
printk(KERN_INFO "%s: unable to get major %d for rtc\n",
ds1302_name, RTC_MAJOR_NR);
return -1;
}
return 0;
}
module_init(ds1302_register);
arch/cris/arch-v10/drivers/pcf8563.c deleted 100644 → 0
View file @ 92bf3d09
/*
* PCF8563 RTC
*
* From Phillips' datasheet:
*
* The PCF8563 is a CMOS real-time clock/calendar optimized for low power
* consumption. A programmable clock output, interrupt output and voltage
* low detector are also provided. All address and data are transferred
* serially via two-line bidirectional I2C-bus. Maximum bus speed is
* 400 kbits/s. The built-in word address register is incremented
* automatically after each written or read byte.
*
* Copyright (c) 2002-2007, Axis Communications AB
* All rights reserved.
*
* Author: Tobias Anderberg <tobiasa@axis.com>.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/ioctl.h>
#include <linux/delay.h>
#include <linux/bcd.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/rtc.h>
#include "i2c.h"
#define PCF8563_MAJOR 121 /* Local major number. */
#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */
#define PCF8563_NAME "PCF8563"
#define DRIVER_VERSION "$Revision: 1.24 $"
/* I2C bus slave registers. */
#define RTC_I2C_READ 0xa3
#define RTC_I2C_WRITE 0xa2
/* Two simple wrapper macros, saves a few keystrokes. */
#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
static DEFINE_MUTEX(pcf8563_mutex);
static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
static const unsigned char days_in_month[] =
{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
static long pcf8563_unlocked_ioctl(struct file *, unsigned int, unsigned long);
/* Cache VL bit value read at driver init since writing the RTC_SECOND
* register clears the VL status.
*/
static int voltage_low;
static const struct file_operations pcf8563_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = pcf8563_unlocked_ioctl,
.llseek = noop_llseek,
};
unsigned char
pcf8563_readreg(int reg)
{
unsigned char res = rtc_read(reg);
/* The PCF8563 does not return 0 for unimplemented bits. */
switch (reg) {
case RTC_SECONDS:
case RTC_MINUTES:
res &= 0x7F;
break;
case RTC_HOURS:
case RTC_DAY_OF_MONTH:
res &= 0x3F;
break;
case RTC_WEEKDAY:
res &= 0x07;
break;
case RTC_MONTH:
res &= 0x1F;
break;
case RTC_CONTROL1:
res &= 0xA8;
break;
case RTC_CONTROL2:
res &= 0x1F;
break;
case RTC_CLOCKOUT_FREQ:
case RTC_TIMER_CONTROL:
res &= 0x83;
break;
}
return res;
}
void
pcf8563_writereg(int reg, unsigned char val)
{
rtc_write(reg, val);
}
void
get_rtc_time(struct rtc_time *tm)
{
tm->tm_sec = rtc_read(RTC_SECONDS);
tm->tm_min = rtc_read(RTC_MINUTES);
tm->tm_hour = rtc_read(RTC_HOURS);
tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH);
tm->tm_wday = rtc_read(RTC_WEEKDAY);
tm->tm_mon = rtc_read(RTC_MONTH);
tm->tm_year = rtc_read(RTC_YEAR);
if (tm->tm_sec & 0x80) {
printk(KERN_ERR "%s: RTC Voltage Low - reliable date/time "
"information is no longer guaranteed!\n", PCF8563_NAME);
}
tm->tm_year = bcd2bin(tm->tm_year) +
((tm->tm_mon & 0x80) ? 100 : 0);
tm->tm_sec &= 0x7F;
tm->tm_min &= 0x7F;
tm->tm_hour &= 0x3F;
tm->tm_mday &= 0x3F;
tm->tm_wday &= 0x07; /* Not coded in BCD. */
tm->tm_mon &= 0x1F;
tm->tm_sec = bcd2bin(tm->tm_sec);
tm->tm_min = bcd2bin(tm->tm_min);
tm->tm_hour = bcd2bin(tm->tm_hour);
tm->tm_mday = bcd2bin(tm->tm_mday);
tm->tm_mon = bcd2bin(tm->tm_mon);
tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */
}
int __init
pcf8563_init(void)
{
static int res;
static int first = 1;
if (!first)
return res;
first = 0;
/* Initiate the i2c protocol. */
res = i2c_init();
if (res < 0) {
printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n");
return res;
}
/*
* First of all we need to reset the chip. This is done by
* clearing control1, control2 and clk freq and resetting
* all alarms.
*/
if (rtc_write(RTC_CONTROL1, 0x00) < 0)
goto err;
if (rtc_write(RTC_CONTROL2, 0x00) < 0)
goto err;
if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0)
goto err;
if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0)
goto err;
/* Reset the alarms. */
if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0)
goto err;
if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0)
goto err;
if (rtc_write(RTC_DAY_ALARM, 0x80) < 0)
goto err;
if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0)
goto err;
/* Check for low voltage, and warn about it. */
if (rtc_read(RTC_SECONDS) & 0x80) {
voltage_low = 1;
printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
"date/time information is no longer guaranteed!\n",
PCF8563_NAME);
}
return res;
err:
printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME);
res = -1;
return res;
}
void __exit
pcf8563_exit(void)
{
unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME);
}
/*
* ioctl calls for this driver. Why return -ENOTTY upon error? Because
* POSIX says so!
*/
static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
/* Some sanity checks. */
if (_IOC_TYPE(cmd) != RTC_MAGIC)
return -ENOTTY;
if (_IOC_NR(cmd) > RTC_MAX_IOCTL)
return -ENOTTY;
switch (cmd) {
case RTC_RD_TIME:
{
struct rtc_time tm;
mutex_lock(&rtc_lock);
memset(&tm, 0, sizeof tm);
get_rtc_time(&tm);
if (copy_to_user((struct rtc_time *) arg, &tm,
sizeof tm)) {
mutex_unlock(&rtc_lock);
return -EFAULT;
}
mutex_unlock(&rtc_lock);
return 0;
}
case RTC_SET_TIME:
{
int leap;
int year;
int century;
struct rtc_time tm;
memset(&tm, 0, sizeof tm);
if (!capable(CAP_SYS_TIME))
return -EPERM;
if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof tm))
return -EFAULT;
/* Convert from struct tm to struct rtc_time. */
tm.tm_year += 1900;
tm.tm_mon += 1;
/*
* Check if tm.tm_year is a leap year. A year is a leap
* year if it is divisible by 4 but not 100, except
* that years divisible by 400 _are_ leap years.
*/
year = tm.tm_year;
leap = (tm.tm_mon == 2) &&
((year % 4 == 0 && year % 100 != 0) || year % 400 == 0);
/* Perform some sanity checks. */
if ((tm.tm_year < 1970) ||
(tm.tm_mon > 12) ||
(tm.tm_mday == 0) ||
(tm.tm_mday > days_in_month[tm.tm_mon] + leap) ||
(tm.tm_wday >= 7) ||
(tm.tm_hour >= 24) ||
(tm.tm_min >= 60) ||
(tm.tm_sec >= 60))
return -EINVAL;
century = (tm.tm_year >= 2000) ? 0x80 : 0;
tm.tm_year = tm.tm_year % 100;
tm.tm_year = bin2bcd(tm.tm_year);
tm.tm_mon = bin2bcd(tm.tm_mon);
tm.tm_mday = bin2bcd(tm.tm_mday);
tm.tm_hour = bin2bcd(tm.tm_hour);
tm.tm_min = bin2bcd(tm.tm_min);
tm.tm_sec = bin2bcd(tm.tm_sec);
tm.tm_mon |= century;
mutex_lock(&rtc_lock);
rtc_write(RTC_YEAR, tm.tm_year);
rtc_write(RTC_MONTH, tm.tm_mon);
rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */
rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
rtc_write(RTC_HOURS, tm.tm_hour);
rtc_write(RTC_MINUTES, tm.tm_min);
rtc_write(RTC_SECONDS, tm.tm_sec);
mutex_unlock(&rtc_lock);
return 0;
}
case RTC_VL_READ:
if (voltage_low) {
printk(KERN_ERR "%s: RTC Voltage Low - "
"reliable date/time information is no "
"longer guaranteed!\n", PCF8563_NAME);
}
if (copy_to_user((int *) arg, &voltage_low, sizeof(int)))
return -EFAULT;
return 0;
case RTC_VL_CLR:
{
/* Clear the VL bit in the seconds register in case
* the time has not been set already (which would
* have cleared it). This does not really matter
* because of the cached voltage_low value but do it
* anyway for consistency. */
int ret = rtc_read(RTC_SECONDS);
rtc_write(RTC_SECONDS, (ret & 0x7F));
/* Clear the cached value. */
voltage_low = 0;
return 0;
}
default:
return -ENOTTY;
}
return 0;
}
static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
int ret;
mutex_lock(&pcf8563_mutex);
ret = pcf8563_ioctl(filp, cmd, arg);
mutex_unlock(&pcf8563_mutex);
return ret;
}
static int __init pcf8563_register(void)
{
if (pcf8563_init() < 0) {
printk(KERN_INFO "%s: Unable to initialize Real-Time Clock "
"Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
return -1;
}
if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
printk(KERN_INFO "%s: Unable to get major number %d for RTC device.\n",
PCF8563_NAME, PCF8563_MAJOR);
return -1;
}
printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME,
DRIVER_VERSION);
/* Check for low voltage, and warn about it. */
if (voltage_low) {
printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
"information is no longer guaranteed!\n", PCF8563_NAME);
}
return 0;
}
module_init(pcf8563_register);
module_exit(pcf8563_exit);
arch/cris/arch-v10/kernel/fasttimer.c
View file @ 4b7eba49
......@@ -21,8 +21,6 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/delay.h>
#include <asm/rtc.h>
#include <arch/svinto.h>
#include <asm/fasttimer.h>
......
arch/cris/arch-v10/kernel/kgdb.c
View file @ 4b7eba49
......@@ -264,7 +264,7 @@ static int write_register (int regno, char *val);
/* Write a value to a specified register in the stack of a thread other
than the current thread. */
static write_stack_register (int thread_id, int regno, char *valptr);
static int write_stack_register(int thread_id, int regno, char *valptr);
/* Read a value from a specified register in the register image. Returns the
status of the read operation. The register value is returned in valptr. */
......
arch/cris/arch-v10/kernel/time.c
View file @ 4b7eba49
......@@ -19,16 +19,12 @@
#include <asm/signal.h>
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/rtc.h>
#include <asm/irq_regs.h>
/* define this if you need to use print_timestamp */
/* it will make jiffies at 96 hz instead of 100 hz though */
#undef USE_CASCADE_TIMERS
extern int set_rtc_mmss(unsigned long nowtime);
extern int have_rtc;
unsigned long get_ns_in_jiffie(void)
{
unsigned char timer_count, t1;
......@@ -203,11 +199,6 @@ time_init(void)
*/
loops_per_usec = 50;
if(RTC_INIT() < 0)
have_rtc = 0;
else
have_rtc = 1;
/* Setup the etrax timers
* Base frequency is 25000 hz, divider 250 -> 100 HZ
* In normal mode, we use timer0, so timer1 is free. In cascade
......
arch/cris/arch-v10/lib/Makefile
View file @ 4b7eba49
......@@ -2,8 +2,5 @@
# Makefile for Etrax-specific library files..
#
EXTRA_AFLAGS := -traditional
lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o
arch/cris/arch-v32/drivers/cryptocop.c
View file @ 4b7eba49
......@@ -1394,11 +1394,10 @@ static int create_md5_pad(int alloc_flag, unsigned long long hashed_length, char
if (padlen < MD5_MIN_PAD_LENGTH) padlen += MD5_BLOCK_LENGTH;
p = kmalloc(padlen, alloc_flag);
p = kzalloc(padlen, alloc_flag);
if (!p) return -ENOMEM;
*p = 0x80;
memset(p+1, 0, padlen - 1);
DEBUG(printk("create_md5_pad: hashed_length=%lld bits == %lld bytes\n", bit_length, hashed_length));
......@@ -1426,11 +1425,10 @@ static int create_sha1_pad(int alloc_flag, unsigned long long hashed_length, cha
if (padlen < SHA1_MIN_PAD_LENGTH) padlen += SHA1_BLOCK_LENGTH;
p = kmalloc(padlen, alloc_flag);
p = kzalloc(padlen, alloc_flag);
if (!p) return -ENOMEM;
*p = 0x80;
memset(p+1, 0, padlen - 1);
DEBUG(printk("create_sha1_pad: hashed_length=%lld bits == %lld bytes\n", bit_length, hashed_length));
......
arch/cris/arch-v32/kernel/ptrace.c
View file @ 4b7eba49
......@@ -114,8 +114,6 @@ void user_disable_single_step(struct task_struct *child)
void
ptrace_disable(struct task_struct *child)
{
unsigned long tmp;
/* Deconfigure SPC and S-bit. */
user_disable_single_step(child);
put_reg(child, PT_SPC, 0);
......
arch/cris/arch-v32/kernel/time.c
View file @ 4b7eba49
......@@ -18,7 +18,6 @@
#include <asm/signal.h>
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/rtc.h>
#include <asm/irq.h>
#include <asm/irq_regs.h>
......@@ -67,7 +66,6 @@ unsigned long timer_regs[NR_CPUS] =
};
extern int set_rtc_mmss(unsigned long nowtime);
extern int have_rtc;
#ifdef CONFIG_CPU_FREQ
static int
......@@ -265,11 +263,6 @@ void __init time_init(void)
*/
loops_per_usec = 50;
if(RTC_INIT() < 0)
have_rtc = 0;
else
have_rtc = 1;
/* Start CPU local timer. */
cris_timer_init();
......
arch/cris/include/arch-v32/arch/cache.h
View file @ 4b7eba49
......@@ -7,7 +7,7 @@
#define L1_CACHE_BYTES 32
#define L1_CACHE_SHIFT 5
#define __read_mostly __attribute__((__section__(".data.read_mostly")))
#define __read_mostly __attribute__((__section__(".data..read_mostly")))
void flush_dma_list(dma_descr_data *descr);
void flush_dma_descr(dma_descr_data *descr, int flush_buf);
......
arch/cris/include/asm/Kbuild
View file @ 4b7eba49
......@@ -6,5 +6,4 @@ header-y += arch-v32/
header-y += ethernet.h
header-y += etraxgpio.h
header-y += rs485.h
header-y += rtc.h
header-y += sync_serial.h
arch/cris/include/asm/posix_types.h
View file @ 4b7eba49
......@@ -33,4 +33,6 @@ typedef int __kernel_ptrdiff_t;
typedef unsigned short __kernel_old_dev_t;
#define __kernel_old_dev_t __kernel_old_dev_t
#include <asm-generic/posix_types.h>
#endif /* __ARCH_CRIS_POSIX_TYPES_H */
arch/cris/include/asm/rtc.h deleted 100644 → 0
View file @ 92bf3d09
#ifndef __RTC_H__
#define __RTC_H__
#ifdef CONFIG_ETRAX_DS1302
/* Dallas DS1302 clock/calendar register numbers. */
# define RTC_SECONDS 0
# define RTC_MINUTES 1
# define RTC_HOURS 2
# define RTC_DAY_OF_MONTH 3
# define RTC_MONTH 4
# define RTC_WEEKDAY 5
# define RTC_YEAR 6
# define RTC_CONTROL 7
/* Bits in CONTROL register. */
# define RTC_CONTROL_WRITEPROTECT 0x80
# define RTC_TRICKLECHARGER 8
/* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */
# define RTC_TCR_PATTERN 0xA0 /* 1010xxxx */
# define RTC_TCR_1DIOD 0x04 /* xxxx01xx */
# define RTC_TCR_2DIOD 0x08 /* xxxx10xx */
# define RTC_TCR_DISABLED 0x00 /* xxxxxx00 Disabled */
# define RTC_TCR_2KOHM 0x01 /* xxxxxx01 2KOhm */
# define RTC_TCR_4KOHM 0x02 /* xxxxxx10 4kOhm */
# define RTC_TCR_8KOHM 0x03 /* xxxxxx11 8kOhm */
#elif defined(CONFIG_ETRAX_PCF8563)
/* I2C bus slave registers. */
# define RTC_I2C_READ 0xa3
# define RTC_I2C_WRITE 0xa2
/* Phillips PCF8563 registers. */
# define RTC_CONTROL1 0x00 /* Control/Status register 1. */
# define RTC_CONTROL2 0x01 /* Control/Status register 2. */
# define RTC_CLOCKOUT_FREQ 0x0d /* CLKOUT frequency. */
# define RTC_TIMER_CONTROL 0x0e /* Timer control. */
# define RTC_TIMER_CNTDOWN 0x0f /* Timer countdown. */
/* BCD encoded clock registers. */
# define RTC_SECONDS 0x02
# define RTC_MINUTES 0x03
# define RTC_HOURS 0x04
# define RTC_DAY_OF_MONTH 0x05
# define RTC_WEEKDAY 0x06 /* Not coded in BCD! */
# define RTC_MONTH 0x07
# define RTC_YEAR 0x08
# define RTC_MINUTE_ALARM 0x09
# define RTC_HOUR_ALARM 0x0a
# define RTC_DAY_ALARM 0x0b
# define RTC_WEEKDAY_ALARM 0x0c
#endif
#ifdef CONFIG_ETRAX_DS1302
extern unsigned char ds1302_readreg(int reg);
extern void ds1302_writereg(int reg, unsigned char val);
extern int ds1302_init(void);
# define CMOS_READ(x) ds1302_readreg(x)
# define CMOS_WRITE(val,reg) ds1302_writereg(reg,val)
# define RTC_INIT() ds1302_init()
#elif defined(CONFIG_ETRAX_PCF8563)
extern unsigned char pcf8563_readreg(int reg);
extern void pcf8563_writereg(int reg, unsigned char val);
extern int pcf8563_init(void);
# define CMOS_READ(x) pcf8563_readreg(x)
# define CMOS_WRITE(val,reg) pcf8563_writereg(reg,val)
# define RTC_INIT() pcf8563_init()
#else
/* No RTC configured so we shouldn't try to access any. */
# define CMOS_READ(x) 42
# define CMOS_WRITE(x,y)
# define RTC_INIT() (-1)
#endif
/*
* The struct used to pass data via the following ioctl. Similar to the
* struct tm in <time.h>, but it needs to be here so that the kernel
* source is self contained, allowing cross-compiles, etc. etc.
*/
struct rtc_time {
int tm_sec;
int tm_min;
int tm_hour;
int tm_mday;
int tm_mon;
int tm_year;
int tm_wday;
int tm_yday;
int tm_isdst;
};
/* ioctl() calls that are permitted to the /dev/rtc interface. */
#define RTC_MAGIC 'p'
/* Read RTC time. */
#define RTC_RD_TIME _IOR(RTC_MAGIC, 0x09, struct rtc_time)
/* Set RTC time. */
#define RTC_SET_TIME _IOW(RTC_MAGIC, 0x0a, struct rtc_time)
#define RTC_SET_CHARGE _IOW(RTC_MAGIC, 0x0b, int)
/* Voltage low detector */
#define RTC_VL_READ _IOR(RTC_MAGIC, 0x13, int)
/* Clear voltage low information */
#define RTC_VL_CLR _IO(RTC_MAGIC, 0x14)
#define RTC_MAX_IOCTL 0x14
#endif /* __RTC_H__ */
arch/cris/kernel/time.c
View file @ 4b7eba49
......@@ -21,7 +21,6 @@
*
*/
#include <asm/rtc.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/param.h>
......@@ -32,7 +31,8 @@
#include <linux/profile.h>
#include <linux/sched.h> /* just for sched_clock() - funny that */
int have_rtc; /* used to remember if we have an RTC or not */;
#define D(x)
#define TICK_SIZE tick
......@@ -50,78 +50,16 @@ u32 arch_gettimeoffset(void)
}
#endif
/*
* BUG: This routine does not handle hour overflow properly; it just
* sets the minutes. Usually you'll only notice that after reboot!
*/
int set_rtc_mmss(unsigned long nowtime)
{
int retval = 0;
int real_seconds, real_minutes, cmos_minutes;
printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime);
if(!have_rtc)
D(printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime));
return 0;
cmos_minutes = CMOS_READ(RTC_MINUTES);
cmos_minutes = bcd2bin(cmos_minutes);
/*
* since we're only adjusting minutes and seconds,
* don't interfere with hour overflow. This avoids
* messing with unknown time zones but requires your
* RTC not to be off by more than 15 minutes
*/
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
real_minutes += 30; /* correct for half hour time zone */
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
real_seconds = bin2bcd(real_seconds);
real_minutes = bin2bcd(real_minutes);
CMOS_WRITE(real_seconds,RTC_SECONDS);
CMOS_WRITE(real_minutes,RTC_MINUTES);
} else {
printk_once(KERN_NOTICE
"set_rtc_mmss: can't update from %d to %d\n",
cmos_minutes, real_minutes);
retval = -1;
}
return retval;
}
/* grab the time from the RTC chip */
unsigned long
get_cmos_time(void)
unsigned long get_cmos_time(void)
{
unsigned int year, mon, day, hour, min, sec;
if(!have_rtc)
return 0;
sec = CMOS_READ(RTC_SECONDS);
min = CMOS_READ(RTC_MINUTES);
hour = CMOS_READ(RTC_HOURS);
day = CMOS_READ(RTC_DAY_OF_MONTH);
mon = CMOS_READ(RTC_MONTH);
year = CMOS_READ(RTC_YEAR);
sec = bcd2bin(sec);
min = bcd2bin(min);
hour = bcd2bin(hour);
day = bcd2bin(day);
mon = bcd2bin(mon);
year = bcd2bin(year);
if ((year += 1900) < 1970)
year += 100;
return mktime(year, mon, day, hour, min, sec);
}
......@@ -132,7 +70,7 @@ int update_persistent_clock(struct timespec now)
void read_persistent_clock(struct timespec *ts)
{
ts->tv_sec = get_cmos_time();
ts->tv_sec = 0;
ts->tv_nsec = 0;
}
......
arch/cris/kernel/vmlinux.lds.S
View file @ 4b7eba49
......@@ -52,6 +52,7 @@ SECTIONS
EXCEPTION_TABLE(4)
_sdata = .;
RODATA
. = ALIGN (4);
......
arch/cris/mm/fault.c
View file @ 4b7eba49
......@@ -58,6 +58,8 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
struct vm_area_struct * vma;
siginfo_t info;
int fault;
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
((writeaccess & 1) ? FAULT_FLAG_WRITE : 0);
D(printk(KERN_DEBUG
"Page fault for %lX on %X at %lX, prot %d write %d\n",
......@@ -115,6 +117,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
if (in_atomic() || !mm)
goto no_context;
retry:
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
if (!vma)
......@@ -163,7 +166,11 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
* the fault.
*/
fault = handle_mm_fault(mm, vma, address, (writeaccess & 1) ? FAULT_FLAG_WRITE : 0);
fault = handle_mm_fault(mm, vma, address, flags);
if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
return;
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto out_of_memory;
......@@ -171,10 +178,24 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
goto do_sigbus;
BUG();
}
if (flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR)
tsk->maj_flt++;
else
tsk->min_flt++;
if (fault & VM_FAULT_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;
/*
* No need to up_read(&mm->mmap_sem) as we would
* have already released it in __lock_page_or_retry
* in mm/filemap.c.
*/
goto retry;
}
}
up_read(&mm->mmap_sem);
return;
......
drivers/net/cris/eth_v10.c
View file @ 4b7eba49
......@@ -1131,7 +1131,6 @@ static irqreturn_t
e100rxtx_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *)dev_id;
struct net_local *np = netdev_priv(dev);
unsigned long irqbits;
/*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7