Commit 4be1ad36 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

V4L/DVB (11134): cx231xx: dmesg cleanup

Remove some printk's that were needed only during development phase. Also,
cleans the printed messages to produce a nicer result.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 38350ba9
......@@ -517,7 +517,7 @@ static int cx231xx_audio_init(struct cx231xx *dev)
bEndpointAddress);
adev->num_alt = uif->num_altsetting;
cx231xx_info(": EndPoint Addr 0x%x, Alternate settings: %i\n",
cx231xx_info("EndPoint Addr 0x%x, Alternate settings: %i\n",
adev->end_point_addr, adev->num_alt);
adev->alt_max_pkt_size = kmalloc(32 * adev->num_alt, GFP_KERNEL);
......
......@@ -224,7 +224,6 @@ void cx231xx_pre_card_setup(struct cx231xx *dev)
cx231xx_info("Identified as %s (card=%d)\n",
dev->board.name, dev->model);
cx231xx_info("Precard: Board is %s\n", dev->board.name);
/* set the direction for GPIO pins */
cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1);
......@@ -310,24 +309,8 @@ void cx231xx_card_setup(struct cx231xx *dev)
if (cx231xx_boards[dev->model].tuner_addr)
dev->tuner_addr = cx231xx_boards[dev->model].tuner_addr;
cx231xx_info(": tuner type %d, tuner address %d \n",
dev->tuner_type, dev->tuner_addr);
/* Do card specific if any */
switch (dev->model) {
case CX231XX_BOARD_CNXT_RDE_250:
/* do card specific GPIO settings if required */
cx231xx_info("Board is Conexant RDE 250\n");
break;
case CX231XX_BOARD_CNXT_RDU_250:
/* do card specific GPIO settings if required */
cx231xx_info("Board is Conexant RDU 250\n");
break;
}
/* request some modules */
if (dev->board.decoder == CX231XX_AVDECODER) {
cx231xx_info(": Requesting cx25840 module\n");
dev->sd_cx25840 =
v4l2_i2c_new_subdev(&dev->i2c_bus[0].i2c_adap,
"cx25840", "cx25840", 0x88 >> 1);
......@@ -338,7 +321,6 @@ void cx231xx_card_setup(struct cx231xx *dev)
}
if (dev->board.tuner_type != TUNER_ABSENT) {
cx231xx_info(": Requesting Tuner module\n");
dev->sd_tuner =
v4l2_i2c_new_subdev(&dev->i2c_bus[1].i2c_adap,
"tuner", "tuner", 0xc2 >> 1);
......
......@@ -125,7 +125,7 @@ int cx231xx_register_extension(struct cx231xx_ops *ops)
if (dev)
ops->init(dev);
}
cx231xx_info("Cx231xx: Initialized (%s) extension\n", ops->name);
printk(KERN_INFO DRIVER_NAME ": %s initialized\n", ops->name);
mutex_unlock(&cx231xx_extension_devlist_lock);
mutex_unlock(&cx231xx_devlist_mutex);
return 0;
......@@ -143,7 +143,7 @@ void cx231xx_unregister_extension(struct cx231xx_ops *ops)
}
mutex_lock(&cx231xx_extension_devlist_lock);
cx231xx_info("Cx231xx: Removed (%s) extension\n", ops->name);
printk(KERN_INFO DRIVER_NAME ": %s removed\n", ops->name);
list_del(&ops->next);
mutex_unlock(&cx231xx_extension_devlist_lock);
mutex_unlock(&cx231xx_devlist_mutex);
......
......@@ -518,8 +518,6 @@ int cx231xx_i2c_register(struct cx231xx_i2c *bus)
BUG_ON(!dev->cx231xx_send_usb_command);
cx231xx_info("%s(bus = %d)\n", __func__, bus->nr);
memcpy(&bus->i2c_adap, &cx231xx_adap_template, sizeof(bus->i2c_adap));
memcpy(&bus->i2c_algo, &cx231xx_algo, sizeof(bus->i2c_algo));
memcpy(&bus->i2c_client, &cx231xx_client_template,
......@@ -537,7 +535,6 @@ int cx231xx_i2c_register(struct cx231xx_i2c *bus)
bus->i2c_client.adapter = &bus->i2c_adap;
if (0 == bus->i2c_rc) {
cx231xx_info("%s: i2c bus %d registered\n", dev->name, bus->nr);
if (i2c_scan)
cx231xx_do_i2c_scan(dev, &bus->i2c_client);
} else
......
......@@ -2353,8 +2353,6 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
{
int ret;
cx231xx_info("%s()\n", __func__);
cx231xx_info("%s: v4l2 driver version %d.%d.%d\n",
dev->name,
(CX231XX_VERSION_CODE >> 16) & 0xff,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment