net: ethtool: pse-pd: Expand pse commands with the PSE PoE interface

Add PSE PoE interface support in the ethtool pse command.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-3-242293fd1900@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/networking/ethtool-netlink.rst

@@ -1733,6 +1733,10 @@ Kernel response contents:
                                                   PSE functions
   ``ETHTOOL_A_PODL_PSE_PW_D_STATUS``         u32  power detection status of the
                                                   PoDL PSE.
+  ``ETHTOOL_A_C33_PSE_ADMIN_STATE``          u32  Operational state of the PoE
+                                                  PSE functions.
+  ``ETHTOOL_A_C33_PSE_PW_D_STATUS``          u32  power detection status of the
+                                                  PoE PSE.
   ======================================  ======  =============================
 
 When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies
@@ -1744,6 +1748,12 @@ aPoDLPSEAdminState. Possible values are:
 .. kernel-doc:: include/uapi/linux/ethtool.h
     :identifiers: ethtool_podl_pse_admin_state
 
+The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_STATE`` implementing
+``IEEE 802.3-2022`` 30.9.1.1.2 aPSEAdminState.
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+    :identifiers: ethtool_c33_pse_admin_state
+
 When set, the optional ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` attribute identifies
 the power detection status of the PoDL PSE.  The status depend on internal PSE
 state machine and automatic PD classification support. This option is
@@ -1753,6 +1763,12 @@ Possible values are:
 .. kernel-doc:: include/uapi/linux/ethtool.h
     :identifiers: ethtool_podl_pse_pw_d_status
 
+The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_PW_D_STATUS`` implementing
+``IEEE 802.3-2022`` 30.9.1.1.5 aPSEPowerDetectionStatus.
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+    :identifiers: ethtool_c33_pse_pw_d_status
+
 PSE_SET
 =======
 
@@ -1763,6 +1779,7 @@ Request contents:
   ======================================  ======  =============================
   ``ETHTOOL_A_PSE_HEADER``                nested  request header
   ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL``       u32  Control PoDL PSE Admin state
+  ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL``        u32  Control PSE Admin state
   ======================================  ======  =============================
 
 When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used
@@ -1770,6 +1787,9 @@ to control PoDL PSE Admin functions. This option is implementing
 ``IEEE 802.3-2018`` 30.15.1.2.1 acPoDLPSEAdminControl. See
 ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` for supported values.
 
+The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` implementing
+``IEEE 802.3-2022`` 30.9.1.2.1 acPSEAdminControl.
+
 RSS_GET
 =======
 

net/ethtool/pse-pd.c

@@ -82,6 +82,10 @@ static int pse_reply_size(const struct ethnl_req_info *req_base,
 		len += nla_total_size(sizeof(u32)); /* _PODL_PSE_ADMIN_STATE */
 	if (st->podl_pw_status > 0)
 		len += nla_total_size(sizeof(u32)); /* _PODL_PSE_PW_D_STATUS */
+	if (st->c33_admin_state > 0)
+		len += nla_total_size(sizeof(u32)); /* _C33_PSE_ADMIN_STATE */
+	if (st->c33_pw_status > 0)
+		len += nla_total_size(sizeof(u32)); /* _C33_PSE_PW_D_STATUS */
 
 	return len;
 }
@@ -103,6 +107,16 @@ static int pse_fill_reply(struct sk_buff *skb,
 			st->podl_pw_status))
 		return -EMSGSIZE;
 
+	if (st->c33_admin_state > 0 &&
+	    nla_put_u32(skb, ETHTOOL_A_C33_PSE_ADMIN_STATE,
+			st->c33_admin_state))
+		return -EMSGSIZE;
+
+	if (st->c33_pw_status > 0 &&
+	    nla_put_u32(skb, ETHTOOL_A_C33_PSE_PW_D_STATUS,
+			st->c33_pw_status))
+		return -EMSGSIZE;
+
 	return 0;
 }
 
@@ -113,25 +127,18 @@ const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
 	[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] =
 		NLA_POLICY_RANGE(NLA_U32, ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
 				 ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED),
+	[ETHTOOL_A_C33_PSE_ADMIN_CONTROL] =
+		NLA_POLICY_RANGE(NLA_U32, ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED,
+				 ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED),
 };
 
 static int
 ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
-{
-	return !!info->attrs[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL];
-}
-
-static int
-ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 {
 	struct net_device *dev = req_info->dev;
-	struct pse_control_config config = {};
 	struct nlattr **tb = info->attrs;
 	struct phy_device *phydev;
 
-	/* this values are already validated by the ethnl_pse_set_policy */
-	config.podl_admin_control = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
-
 	phydev = dev->phydev;
 	if (!phydev) {
 		NL_SET_ERR_MSG(info->extack, "No PHY is attached");
@@ -143,6 +150,39 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 		return -EOPNOTSUPP;
 	}
 
+	if (tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] &&
+	    !pse_has_podl(phydev->psec)) {
+		NL_SET_ERR_MSG_ATTR(info->extack,
+				    tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL],
+				    "setting PoDL PSE admin control not supported");
+		return -EOPNOTSUPP;
+	}
+	if (tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL] &&
+	    !pse_has_c33(phydev->psec)) {
+		NL_SET_ERR_MSG_ATTR(info->extack,
+				    tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL],
+				    "setting C33 PSE admin control not supported");
+		return -EOPNOTSUPP;
+	}
+
+	return 1;
+}
+
+static int
+ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
+{
+	struct net_device *dev = req_info->dev;
+	struct pse_control_config config = {};
+	struct nlattr **tb = info->attrs;
+	struct phy_device *phydev;
+
+	phydev = dev->phydev;
+	/* These values are already validated by the ethnl_pse_set_policy */
+	if (pse_has_podl(phydev->psec))
+		config.podl_admin_control = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
+	if (pse_has_c33(phydev->psec))
+		config.c33_admin_control = nla_get_u32(tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL]);
+
 	/* Return errno directly - PSE has no notification */
 	return pse_ethtool_set_config(phydev->psec, info->extack, &config);
 }