Commit 4d4f3791 authored by David S. Miller's avatar David S. Miller

Merge tag 'mac80211-for-davem-2015-12-15' of...

Merge tag 'mac80211-for-davem-2015-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Another set of fixes:
 * memory leak fixes (from Ola)
 * operating mode notification spec compliance fix (from Eyal)
 * copy rfkill names in case pointer becomes invalid (myself)
 * two hardware restart fixes (myself)
 * get rid of "limiting TX power" log spam (myself)
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 79aa05a2 cf1e05c6
......@@ -1169,8 +1169,7 @@ static int sta_apply_parameters(struct ieee80211_local *local,
* rc isn't initialized here yet, so ignore it
*/
__ieee80211_vht_handle_opmode(sdata, sta,
params->opmode_notif,
band, false);
params->opmode_notif, band);
}
if (ieee80211_vif_is_mesh(&sdata->vif))
......
......@@ -1709,10 +1709,10 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta);
void ieee80211_sta_set_rx_nss(struct sta_info *sta);
u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta, u8 opmode,
enum ieee80211_band band, bool nss_only);
enum ieee80211_band band);
void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta, u8 opmode,
enum ieee80211_band band, bool nss_only);
enum ieee80211_band band);
void ieee80211_apply_vhtcap_overrides(struct ieee80211_sub_if_data *sdata,
struct ieee80211_sta_vht_cap *vht_cap);
void ieee80211_get_vht_mask_from_cap(__le16 vht_cap,
......
......@@ -1379,21 +1379,26 @@ static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
*/
if (has_80211h_pwr &&
(!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
new_ap_level = pwr_level_80211h;
if (sdata->ap_power_level == new_ap_level)
return 0;
sdata_dbg(sdata,
"Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
sdata->u.mgd.bssid);
new_ap_level = pwr_level_80211h;
} else { /* has_cisco_pwr is always true here. */
sdata_dbg(sdata,
"Limiting TX power to %d dBm as advertised by %pM\n",
pwr_level_cisco, sdata->u.mgd.bssid);
new_ap_level = pwr_level_cisco;
}
if (sdata->ap_power_level == new_ap_level)
return 0;
sdata_dbg(sdata,
"Limiting TX power to %d dBm as advertised by %pM\n",
pwr_level_cisco, sdata->u.mgd.bssid);
}
sdata->ap_power_level = new_ap_level;
if (__ieee80211_recalc_txpower(sdata))
return BSS_CHANGED_TXPOWER;
......@@ -3575,7 +3580,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
if (sta && elems.opmode_notif)
ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
rx_status->band, true);
rx_status->band);
mutex_unlock(&local->sta_mtx);
changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt,
......
......@@ -2736,8 +2736,7 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode;
ieee80211_vht_handle_opmode(rx->sdata, rx->sta,
opmode, status->band,
false);
opmode, status->band);
goto handled;
}
default:
......
......@@ -1641,6 +1641,29 @@ void ieee80211_stop_device(struct ieee80211_local *local)
drv_stop(local);
}
static void ieee80211_flush_completed_scan(struct ieee80211_local *local,
bool aborted)
{
/* It's possible that we don't handle the scan completion in
* time during suspend, so if it's still marked as completed
* here, queue the work and flush it to clean things up.
* Instead of calling the worker function directly here, we
* really queue it to avoid potential races with other flows
* scheduling the same work.
*/
if (test_bit(SCAN_COMPLETED, &local->scanning)) {
/* If coming from reconfiguration failure, abort the scan so
* we don't attempt to continue a partial HW scan - which is
* possible otherwise if (e.g.) the 2.4 GHz portion was the
* completed scan, and a 5 GHz portion is still pending.
*/
if (aborted)
set_bit(SCAN_ABORTED, &local->scanning);
ieee80211_queue_delayed_work(&local->hw, &local->scan_work, 0);
flush_delayed_work(&local->scan_work);
}
}
static void ieee80211_handle_reconfig_failure(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
......@@ -1660,6 +1683,8 @@ static void ieee80211_handle_reconfig_failure(struct ieee80211_local *local)
local->suspended = false;
local->in_reconfig = false;
ieee80211_flush_completed_scan(local, true);
/* scheduled scan clearly can't be running any more, but tell
* cfg80211 and clear local state
*/
......@@ -1698,6 +1723,27 @@ static void ieee80211_assign_chanctx(struct ieee80211_local *local,
mutex_unlock(&local->chanctx_mtx);
}
static void ieee80211_reconfig_stations(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
/* add STAs back */
mutex_lock(&local->sta_mtx);
list_for_each_entry(sta, &local->sta_list, list) {
enum ieee80211_sta_state state;
if (!sta->uploaded || sta->sdata != sdata)
continue;
for (state = IEEE80211_STA_NOTEXIST;
state < sta->sta_state; state++)
WARN_ON(drv_sta_state(local, sta->sdata, sta, state,
state + 1));
}
mutex_unlock(&local->sta_mtx);
}
int ieee80211_reconfig(struct ieee80211_local *local)
{
struct ieee80211_hw *hw = &local->hw;
......@@ -1833,50 +1879,11 @@ int ieee80211_reconfig(struct ieee80211_local *local)
WARN_ON(drv_add_chanctx(local, ctx));
mutex_unlock(&local->chanctx_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
ieee80211_assign_chanctx(local, sdata);
}
sdata = rtnl_dereference(local->monitor_sdata);
if (sdata && ieee80211_sdata_running(sdata))
ieee80211_assign_chanctx(local, sdata);
}
/* add STAs back */
mutex_lock(&local->sta_mtx);
list_for_each_entry(sta, &local->sta_list, list) {
enum ieee80211_sta_state state;
if (!sta->uploaded)
continue;
/* AP-mode stations will be added later */
if (sta->sdata->vif.type == NL80211_IFTYPE_AP)
continue;
for (state = IEEE80211_STA_NOTEXIST;
state < sta->sta_state; state++)
WARN_ON(drv_sta_state(local, sta->sdata, sta, state,
state + 1));
}
mutex_unlock(&local->sta_mtx);
/* reconfigure tx conf */
if (hw->queues >= IEEE80211_NUM_ACS) {
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
sdata->vif.type == NL80211_IFTYPE_MONITOR ||
!ieee80211_sdata_running(sdata))
continue;
for (i = 0; i < IEEE80211_NUM_ACS; i++)
drv_conf_tx(local, sdata, i,
&sdata->tx_conf[i]);
}
}
/* reconfigure hardware */
ieee80211_hw_config(local, ~0);
......@@ -1889,6 +1896,22 @@ int ieee80211_reconfig(struct ieee80211_local *local)
if (!ieee80211_sdata_running(sdata))
continue;
ieee80211_assign_chanctx(local, sdata);
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MONITOR:
break;
default:
ieee80211_reconfig_stations(sdata);
/* fall through */
case NL80211_IFTYPE_AP: /* AP stations are handled later */
for (i = 0; i < IEEE80211_NUM_ACS; i++)
drv_conf_tx(local, sdata, i,
&sdata->tx_conf[i]);
break;
}
/* common change flags for all interface types */
changed = BSS_CHANGED_ERP_CTS_PROT |
BSS_CHANGED_ERP_PREAMBLE |
......@@ -2074,17 +2097,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
mb();
local->resuming = false;
/* It's possible that we don't handle the scan completion in
* time during suspend, so if it's still marked as completed
* here, queue the work and flush it to clean things up.
* Instead of calling the worker function directly here, we
* really queue it to avoid potential races with other flows
* scheduling the same work.
*/
if (test_bit(SCAN_COMPLETED, &local->scanning)) {
ieee80211_queue_delayed_work(&local->hw, &local->scan_work, 0);
flush_delayed_work(&local->scan_work);
}
ieee80211_flush_completed_scan(local, false);
if (local->open_count && !reconfig_due_to_wowlan)
drv_reconfig_complete(local, IEEE80211_RECONFIG_TYPE_SUSPEND);
......
......@@ -378,7 +378,7 @@ void ieee80211_sta_set_rx_nss(struct sta_info *sta)
u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta, u8 opmode,
enum ieee80211_band band, bool nss_only)
enum ieee80211_band band)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
......@@ -401,9 +401,6 @@ u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
changed |= IEEE80211_RC_NSS_CHANGED;
}
if (nss_only)
return changed;
switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) {
case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ:
sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20;
......@@ -430,13 +427,12 @@ u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta, u8 opmode,
enum ieee80211_band band, bool nss_only)
enum ieee80211_band band)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
u32 changed = __ieee80211_vht_handle_opmode(sdata, sta, opmode,
band, nss_only);
u32 changed = __ieee80211_vht_handle_opmode(sdata, sta, opmode, band);
if (changed > 0)
rate_control_rate_update(local, sband, sta, changed);
......
......@@ -49,7 +49,6 @@
struct rfkill {
spinlock_t lock;
const char *name;
enum rfkill_type type;
unsigned long state;
......@@ -73,6 +72,7 @@ struct rfkill {
struct delayed_work poll_work;
struct work_struct uevent_work;
struct work_struct sync_work;
char name[];
};
#define to_rfkill(d) container_of(d, struct rfkill, dev)
......@@ -876,14 +876,14 @@ struct rfkill * __must_check rfkill_alloc(const char *name,
if (WARN_ON(type == RFKILL_TYPE_ALL || type >= NUM_RFKILL_TYPES))
return NULL;
rfkill = kzalloc(sizeof(*rfkill), GFP_KERNEL);
rfkill = kzalloc(sizeof(*rfkill) + strlen(name) + 1, GFP_KERNEL);
if (!rfkill)
return NULL;
spin_lock_init(&rfkill->lock);
INIT_LIST_HEAD(&rfkill->node);
rfkill->type = type;
rfkill->name = name;
strcpy(rfkill->name, name);
rfkill->ops = ops;
rfkill->data = ops_data;
......
......@@ -7941,8 +7941,10 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
if (nla_get_flag(info->attrs[NL80211_ATTR_USE_RRM])) {
if (!(rdev->wiphy.features &
NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES) ||
!(rdev->wiphy.features & NL80211_FEATURE_QUIET))
!(rdev->wiphy.features & NL80211_FEATURE_QUIET)) {
kzfree(connkeys);
return -EINVAL;
}
connect.flags |= ASSOC_REQ_USE_RRM;
}
......@@ -9503,6 +9505,7 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info)
if (new_triggers.tcp && new_triggers.tcp->sock)
sock_release(new_triggers.tcp->sock);
kfree(new_triggers.tcp);
kfree(new_triggers.nd_config);
return err;
}
#endif
......
......@@ -3029,6 +3029,7 @@ int set_regdom(const struct ieee80211_regdomain *rd,
break;
default:
WARN(1, "invalid initiator %d\n", lr->initiator);
kfree(rd);
return -EINVAL;
}
......@@ -3221,8 +3222,10 @@ int __init regulatory_init(void)
/* We always try to get an update for the static regdomain */
err = regulatory_hint_core(cfg80211_world_regdom->alpha2);
if (err) {
if (err == -ENOMEM)
if (err == -ENOMEM) {
platform_device_unregister(reg_pdev);
return err;
}
/*
* N.B. kobject_uevent_env() can fail mainly for when we're out
* memory which is handled and propagated appropriately above
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment