coresight: adding basic support for D01 board

Support for 16 PTMs, funnel, TPIU and replicator connected
to the ETB are included.
Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/arm/boot/dts/hip04.dtsi

@@ -190,6 +190,12 @@ clk_168m: clk_168m {
 		clock-frequency = <168000000>;
 	};
 
+	clk_375m: clk_375m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <375000000>;
+	};
+
 	soc {
 		/* It's a 32-bit SoC. */
 		#address-cells = <1>;
@@ -264,4 +270,715 @@ sata0: sata@a000000 {
 		};
 
 	};
+
+	etb@0,e3c42000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3c42000 0 0x1000>;
+
+		coresight-default-sink;
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		port {
+			etb0_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator0_out_port0>;
+			};
+		};
+	};
+
+	etb@0,e3c82000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3c82000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		port {
+			etb1_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator1_out_port0>;
+			};
+		};
+	};
+
+	etb@0,e3cc2000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3cc2000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		port {
+			etb2_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator2_out_port0>;
+			};
+		};
+	};
+
+	etb@0,e3d02000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3d02000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		port {
+			etb3_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator3_out_port0>;
+			};
+		};
+	};
+
+	tpiu@0,e3c05000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0xe3c05000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		port {
+			tpiu_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&funnel4_out_port0>;
+			};
+		};
+	};
+
+	replicator0 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator0_out_port0: endpoint {
+					remote-endpoint = <&etb0_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator0_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port0>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator0_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&funnel0_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator1 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator1_out_port0: endpoint {
+					remote-endpoint = <&etb1_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator1_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port1>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator1_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&funnel1_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator2 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator2_out_port0: endpoint {
+					remote-endpoint = <&etb2_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+					replicator2_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port2>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator2_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&funnel2_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator3 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator3_out_port0: endpoint {
+					remote-endpoint = <&etb3_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator3_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port3>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator3_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&funnel3_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c41000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0xe3c41000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel0_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator0_in_port0>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel0_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel0_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel0_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm2_out_port>;
+				};
+			};
+
+			port@4 {
+				reg = <3>;
+				funnel0_in_port3: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm3_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c81000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0xe3c81000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel1_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator1_in_port0>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel1_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm4_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel1_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm5_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel1_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm6_out_port>;
+				};
+			};
+
+			port@4 {
+				reg = <3>;
+				funnel1_in_port3: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm7_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3cc1000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0xe3cc1000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel2_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator2_in_port0>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel2_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm8_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel2_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm9_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel2_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm10_out_port>;
+				};
+			};
+
+			port@4 {
+				reg = <3>;
+				funnel2_in_port3: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm11_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3d01000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0xe3d01000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel3_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator3_in_port0>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel3_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm12_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel3_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm13_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel3_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm14_out_port>;
+				};
+			};
+
+			port@4 {
+				reg = <3>;
+				funnel3_in_port3: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm15_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c04000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0xe3c04000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel4_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel4_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint =
+						<&replicator0_out_port1>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel4_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint =
+						<&replicator1_out_port1>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel4_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint =
+						<&replicator2_out_port1>;
+				};
+			};
+
+			port@4 {
+				reg = <3>;
+				funnel4_in_port3: endpoint {
+					slave-mode;
+					remote-endpoint =
+						<&replicator3_out_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7c000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU0>;
+		port {
+			ptm0_out_port: endpoint {
+				remote-endpoint = <&funnel0_in_port0>;
+			};
+		};
+	};
+
+	ptm@0,e3c7d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7d000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU1>;
+		port {
+			ptm1_out_port: endpoint {
+				remote-endpoint = <&funnel0_in_port1>;
+			};
+		};
+	};
+
+	ptm@0,e3c7e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7e000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU2>;
+		port {
+			ptm2_out_port: endpoint {
+				remote-endpoint = <&funnel0_in_port2>;
+			};
+		};
+	};
+
+	ptm@0,e3c7f000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7f000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU3>;
+		port {
+			ptm3_out_port: endpoint {
+				remote-endpoint = <&funnel0_in_port3>;
+			};
+		};
+	};
+
+	ptm@0,e3cbc000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbc000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU4>;
+		port {
+			ptm4_out_port: endpoint {
+				remote-endpoint = <&funnel1_in_port0>;
+			};
+		};
+	};
+
+	ptm@0,e3cbd000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbd000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU5>;
+		port {
+			ptm5_out_port: endpoint {
+				remote-endpoint = <&funnel1_in_port1>;
+			};
+		};
+	};
+
+	ptm@0,e3cbe000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbe000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU6>;
+		port {
+			ptm6_out_port: endpoint {
+				remote-endpoint = <&funnel1_in_port2>;
+			};
+		};
+	};
+
+	ptm@0,e3cbf000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbf000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU7>;
+		port {
+			ptm7_out_port: endpoint {
+				remote-endpoint = <&funnel1_in_port3>;
+			};
+		};
+	};
+
+	ptm@0,e3cfc000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfc000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU8>;
+		port {
+			ptm8_out_port: endpoint {
+				remote-endpoint = <&funnel2_in_port0>;
+			};
+		};
+	};
+
+	ptm@0,e3cfd000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfd000 0 0x1000>;
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU9>;
+		port {
+			ptm9_out_port: endpoint {
+				remote-endpoint = <&funnel2_in_port1>;
+			};
+		};
+	};
+
+	ptm@0,e3cfe000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfe000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU10>;
+		port {
+			ptm10_out_port: endpoint {
+				remote-endpoint = <&funnel2_in_port2>;
+			};
+		};
+	};
+
+	ptm@0,e3cff000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cff000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU11>;
+		port {
+			ptm11_out_port: endpoint {
+				remote-endpoint = <&funnel2_in_port3>;
+			};
+		};
+	};
+
+	ptm@0,e3d3c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3c000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU12>;
+		port {
+			ptm12_out_port: endpoint {
+				remote-endpoint = <&funnel3_in_port0>;
+			};
+		};
+	};
+
+	ptm@0,e3d3d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3d000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU13>;
+		port {
+			ptm13_out_port: endpoint {
+				remote-endpoint = <&funnel3_in_port1>;
+			};
+		};
+	};
+
+	ptm@0,e3d3e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3e000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU14>;
+		port {
+			ptm14_out_port: endpoint {
+				remote-endpoint = <&funnel3_in_port2>;
+			};
+		};
+	};
+
+	ptm@0,e3d3f000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3f000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU15>;
+		port {
+			ptm15_out_port: endpoint {
+				remote-endpoint = <&funnel3_in_port3>;
+			};
+		};
+	};
 };