Commit 4d614128 authored by Peter Chen's avatar Peter Chen

usb: chipidea: imx: pinctrl for HSIC is optional

For imx chipidea controllers, if they use mxs PHY, they need pinctrl
for HSIC. Otherwise, it doesn't need pinctrl and usbmisc control. Like
imx7d and imx8mm.
Reported-by: default avatarAndré Draszik <git@andred.net>
Signed-off-by: default avatarPeter Chen <peter.chen@nxp.com>
parent 3f4aad6e
......@@ -274,11 +274,14 @@ static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned int event)
switch (event) {
case CI_HDRC_IMX_HSIC_ACTIVE_EVENT:
if (data->pinctrl) {
ret = pinctrl_select_state(data->pinctrl,
data->pinctrl_hsic_active);
if (ret)
dev_err(dev, "hsic_active select failed, err=%d\n",
dev_err(dev,
"hsic_active select failed, err=%d\n",
ret);
}
break;
case CI_HDRC_IMX_HSIC_SUSPEND_EVENT:
ret = imx_usbmisc_hsic_set_connect(data->usbmisc_data);
......@@ -306,7 +309,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
const struct ci_hdrc_imx_platform_flag *imx_platform_flag;
struct device_node *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct pinctrl_state *pinctrl_hsic_idle;
of_id = of_match_device(ci_hdrc_imx_dt_ids, dev);
if (!of_id)
......@@ -339,6 +341,33 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
return PTR_ERR(data->pinctrl);
}
data->hsic_pad_regulator =
devm_regulator_get_optional(dev, "hsic");
if (PTR_ERR(data->hsic_pad_regulator) == -ENODEV) {
/* no pad regualator is needed */
data->hsic_pad_regulator = NULL;
} else if (IS_ERR(data->hsic_pad_regulator)) {
if (PTR_ERR(data->hsic_pad_regulator) != -EPROBE_DEFER)
dev_err(dev,
"Get HSIC pad regulator error: %ld\n",
PTR_ERR(data->hsic_pad_regulator));
return PTR_ERR(data->hsic_pad_regulator);
}
if (data->hsic_pad_regulator) {
ret = regulator_enable(data->hsic_pad_regulator);
if (ret) {
dev_err(dev,
"Failed to enable HSIC pad regulator\n");
return ret;
}
}
}
/* HSIC pinctrl handling */
if (data->pinctrl) {
struct pinctrl_state *pinctrl_hsic_idle;
pinctrl_hsic_idle = pinctrl_lookup_state(data->pinctrl, "idle");
if (IS_ERR(pinctrl_hsic_idle)) {
dev_err(dev,
......@@ -361,28 +390,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
PTR_ERR(data->pinctrl_hsic_active));
return PTR_ERR(data->pinctrl_hsic_active);
}
data->hsic_pad_regulator =
devm_regulator_get_optional(dev, "hsic");
if (PTR_ERR(data->hsic_pad_regulator) == -ENODEV) {
/* no pad regualator is needed */
data->hsic_pad_regulator = NULL;
} else if (IS_ERR(data->hsic_pad_regulator)) {
if (PTR_ERR(data->hsic_pad_regulator) != -EPROBE_DEFER)
dev_err(dev,
"Get HSIC pad regulator error: %ld\n",
PTR_ERR(data->hsic_pad_regulator));
return PTR_ERR(data->hsic_pad_regulator);
}
if (data->hsic_pad_regulator) {
ret = regulator_enable(data->hsic_pad_regulator);
if (ret) {
dev_err(dev,
"Failed to enable HSIC pad regulator\n");
return ret;
}
}
}
if (pdata.flags & CI_HDRC_PMQOS)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment