i2c: designware: Define software status flags with BIT()

Define software status flags with a BIT() macro. While at it remove
STATUS_IDLE and replace its use with zero initialization and status
flags clearing with a mask.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

drivers/i2c/busses/i2c-designware-core.h

@@ -123,12 +123,12 @@
 #define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK	GENMASK(3, 2)
 
 /*
- * status codes
+ * Sofware status flags
  */
-#define STATUS_IDLE			0x0
-#define STATUS_ACTIVE			0x1
-#define STATUS_WRITE_IN_PROGRESS	0x2
-#define STATUS_READ_IN_PROGRESS		0x4
+#define STATUS_ACTIVE			BIT(0)
+#define STATUS_WRITE_IN_PROGRESS	BIT(1)
+#define STATUS_READ_IN_PROGRESS		BIT(2)
+#define STATUS_MASK			GENMASK(2, 0)
 
 /*
  * operation modes

drivers/i2c/busses/i2c-designware-master.c

@@ -574,7 +574,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	dev->msg_write_idx = 0;
 	dev->msg_read_idx = 0;
 	dev->msg_err = 0;
-	dev->status = STATUS_IDLE;
+	dev->status = 0;
 	dev->abort_source = 0;
 	dev->rx_outstanding = 0;
 
@@ -731,7 +731,7 @@ static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
 
 	if (stat & DW_IC_INTR_TX_ABRT) {
 		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
-		dev->status = STATUS_IDLE;
+		dev->status &= ~STATUS_MASK;
 		dev->rx_outstanding = 0;
 
 		/*

drivers/i2c/busses/i2c-designware-slave.c

@@ -82,7 +82,7 @@ static int i2c_dw_reg_slave(struct i2c_client *slave)
 	dev->msg_write_idx = 0;
 	dev->msg_read_idx = 0;
 	dev->msg_err = 0;
-	dev->status = STATUS_IDLE;
+	dev->status = 0;
 	dev->abort_source = 0;
 	dev->rx_outstanding = 0;