Commit 4da54d93 authored by Jonathan Cameron's avatar Jonathan Cameron Committed by Greg Kroah-Hartman

staging: iio: adis16300 clean out some unused code

Signed-off-by: default avatarJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent a1169c5a
...@@ -115,21 +115,12 @@ struct adis16300_state { ...@@ -115,21 +115,12 @@ struct adis16300_state {
struct mutex buf_lock; struct mutex buf_lock;
}; };
int adis16300_spi_write_reg_8(struct device *dev,
u8 reg_address,
u8 val);
int adis16300_spi_read_burst(struct device *dev, u8 *rx); int adis16300_spi_read_burst(struct device *dev, u8 *rx);
int adis16300_spi_read_sequence(struct device *dev,
u8 *tx, u8 *rx, int num);
int adis16300_set_irq(struct device *dev, bool enable); int adis16300_set_irq(struct device *dev, bool enable);
int adis16300_reset(struct device *dev); int adis16300_reset(struct device *dev);
int adis16300_stop_device(struct device *dev);
int adis16300_check_status(struct device *dev); int adis16300_check_status(struct device *dev);
#ifdef CONFIG_IIO_RING_BUFFER #ifdef CONFIG_IIO_RING_BUFFER
......
...@@ -40,7 +40,7 @@ ...@@ -40,7 +40,7 @@
* @reg_address: the address of the register to be written * @reg_address: the address of the register to be written
* @val: the value to write * @val: the value to write
**/ **/
int adis16300_spi_write_reg_8(struct device *dev, static int adis16300_spi_write_reg_8(struct device *dev,
u8 reg_address, u8 reg_address,
u8 val) u8 val)
{ {
...@@ -202,55 +202,6 @@ int adis16300_spi_read_burst(struct device *dev, u8 *rx) ...@@ -202,55 +202,6 @@ int adis16300_spi_read_burst(struct device *dev, u8 *rx)
return ret; return ret;
} }
/**
* adis16300_spi_read_sequence() - read a sequence of 16-bit registers
* @dev: device associated with child of actual device (iio_dev or iio_trig)
* @tx: register addresses in bytes 0,2,4,6... (min size is 2*num bytes)
* @rx: somewhere to pass back the value read (min size is 2*num bytes)
**/
int adis16300_spi_read_sequence(struct device *dev,
u8 *tx, u8 *rx, int num)
{
struct spi_message msg;
struct spi_transfer *xfers;
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct adis16300_state *st = iio_dev_get_devdata(indio_dev);
int ret, i;
xfers = kzalloc(num + 1, GFP_KERNEL);
if (xfers == NULL) {
dev_err(&st->us->dev, "memory alloc failed");
ret = -ENOMEM;
goto error_ret;
}
/* tx: |add1|addr2|addr3|...|addrN |zero|
* rx: |zero|res1 |res2 |...|resN-1|resN| */
spi_message_init(&msg);
for (i = 0; i < num + 1; i++) {
if (i > 0)
xfers[i].rx_buf = st->rx + 2*(i - 1);
if (i < num)
xfers[i].tx_buf = st->tx + 2*i;
xfers[i].bits_per_word = 8;
xfers[i].len = 2;
xfers[i].cs_change = 1;
spi_message_add_tail(&xfers[i], &msg);
}
mutex_lock(&st->buf_lock);
ret = spi_sync(st->us, &msg);
if (ret)
dev_err(&st->us->dev, "problem when reading sequence");
mutex_unlock(&st->buf_lock);
kfree(xfers);
error_ret:
return ret;
}
static ssize_t adis16300_spi_read_signed(struct device *dev, static ssize_t adis16300_spi_read_signed(struct device *dev,
struct device_attribute *attr, struct device_attribute *attr,
char *buf, char *buf,
...@@ -458,7 +409,7 @@ int adis16300_reset(struct device *dev) ...@@ -458,7 +409,7 @@ int adis16300_reset(struct device *dev)
} }
/* Power down the device */ /* Power down the device */
int adis16300_stop_device(struct device *dev) static int adis16300_stop_device(struct device *dev)
{ {
int ret; int ret;
u16 val = ADIS16300_SLP_CNT_POWER_OFF; u16 val = ADIS16300_SLP_CNT_POWER_OFF;
...@@ -470,23 +421,6 @@ int adis16300_stop_device(struct device *dev) ...@@ -470,23 +421,6 @@ int adis16300_stop_device(struct device *dev)
return ret; return ret;
} }
int adis16300_self_test(struct device *dev)
{
int ret;
ret = adis16300_spi_write_reg_16(dev,
ADIS16300_MSC_CTRL,
ADIS16300_MSC_CTRL_MEM_TEST);
if (ret) {
dev_err(dev, "problem starting self test");
goto err_ret;
}
adis16300_check_status(dev);
err_ret:
return ret;
}
int adis16300_check_status(struct device *dev) int adis16300_check_status(struct device *dev)
{ {
u16 status; u16 status;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment