Commit 4dabe948 authored by Martin Dalecki's avatar Martin Dalecki Committed by Linus Torvalds

[PATCH] 2.5.6 IDE 18

No fixes for new problems which occured since today, just syncup.

 - Remove help text about suitable compiler versions, which is obsoleted
   by the overall kernel reality.

 - Remove traces of not progressing work in progress code for the
   CONFIG_BLK_DEV_ADMA option as well as the empty ide-adma.c file as
   well as CONFIG_BLK_DEV_IDEDMA_TCQ.

 - Remove redundant CONFIG_BLK_DEV_IDE != n check in ide/Config.in. Hugh,
   this is a tricky one...

 - Add EXPORT_SYMBOL(ide_fops) again, since it's used in ide-cd.c add a
   note there that this is actually possibly adding the same device twice
   to the devfs stuff.

 - Finally change the MAINTAINER entry. Just too many persons bogged me
   about it and it doesn't take me too much time apparently.

 - Apply sis.patch.20020304_1.

 - Don't call ide_release_dma twice in cleanup_ata, since ide_unregister
   is already calling it for us. Change prototype of ide_unregister to
   take a hwif as parameter and disable an ioctl for removing/scanning
   hwif from the list of handled interfaces. I see no reasons for having
   it and doing it is the fastest DOS attack on my home system I know
   about it. Contrary to the comments found here and there, hdparm
   doesn't use it. There are better hot plugging interfaces coming to the
   kernel right now anyway.

 - Wrap invalidate_drives in ide_unregister under the ide_lock instead of
   disabling and enabling interrupts during this operation. There are
   plenty of other places where the IDE drivers are enabling and
   disabling interrupts just to protect some data structures.

 - Don't call destroy_proc_ide_drives(hwif) for every single drive out
   there.This routine takes a hwif as a parameter.

 - Resync with the instable 2.5.6...
parent 24237d11
......@@ -709,14 +709,12 @@ W: http://www.developer.ibm.com/welcome/netfinity/serveraid.html
S: Supported
IDE DRIVER [GENERAL]
P: Andre Hedrick
M: andre@linux-ide.org
M: andre@linuxdiskcert.org
P: Martin Dalecki
M: martin@dalecki.de
I: pl_PL.ISO8859-2, de_DE.ISO8859-15, (en_US.ISO8859-1)
L: linux-kernel@vger.kernel.org
W: http://www.kernel.org/pub/linux/kernel/people/hedrick/
W: http://www.linux-ide.org/
W: http://www.linuxdiskcert.org/
S: Maintained
W: http://www.dalecki.de
S: Developement
IDE/ATAPI CDROM DRIVER
P: Jens Axboe
......
......@@ -255,7 +255,6 @@ CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
CONFIG_BLK_DEV_ALI15X3=y
......
......@@ -454,7 +454,6 @@ CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
......
......@@ -258,7 +258,6 @@ CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
......
......@@ -207,7 +207,6 @@ CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
CONFIG_BLK_DEV_IDEDMA=y
......
......@@ -224,7 +224,6 @@ CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_IDEDMA_PCI is not set
# CONFIG_BLK_DEV_ADMA is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_IDEDMA is not set
......
......@@ -289,7 +289,6 @@ CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
......
......@@ -750,9 +750,7 @@ static struct ioctl32_list ioctl32_handler_table[] = {
IOCTL32_DEFAULT(HDIO_SET_NOWERR),
IOCTL32_DEFAULT(HDIO_SET_DMA),
IOCTL32_DEFAULT(HDIO_SET_PIO_MODE),
IOCTL32_DEFAULT(HDIO_SCAN_HWIF),
IOCTL32_DEFAULT(HDIO_SET_NICE),
//HDIO_UNREGISTER_HWIF
IOCTL32_DEFAULT(BLKROSET), /* fs.h ioctls */
IOCTL32_DEFAULT(BLKROGET),
......
......@@ -252,7 +252,6 @@ CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
......
......@@ -235,7 +235,6 @@ CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
CONFIG_BLK_DEV_IDEDMA=y
......
......@@ -239,7 +239,6 @@ CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_IDEDMA_PCI is not set
# CONFIG_BLK_DEV_ADMA is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_IDEDMA is not set
......
......@@ -242,7 +242,6 @@ CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
......
......@@ -246,7 +246,6 @@ CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
CONFIG_BLK_DEV_IDEDMA=y
......
......@@ -209,7 +209,6 @@ CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
CONFIG_BLK_DEV_IDEDMA=y
......
......@@ -252,7 +252,6 @@ CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
......
......@@ -3713,7 +3713,6 @@ COMPATIBLE_IOCTL(HDIO_SET_32BIT),
COMPATIBLE_IOCTL(HDIO_SET_MULTCOUNT),
COMPATIBLE_IOCTL(HDIO_DRIVE_CMD),
COMPATIBLE_IOCTL(HDIO_SET_PIO_MODE),
COMPATIBLE_IOCTL(HDIO_SCAN_HWIF),
COMPATIBLE_IOCTL(HDIO_SET_NICE),
/* 0x02 -- Floppy ioctls */
COMPATIBLE_IOCTL(FDMSGON),
......
......@@ -291,7 +291,6 @@ CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
CONFIG_BLK_DEV_ALI15X3=y
......
......@@ -3973,7 +3973,6 @@ COMPATIBLE_IOCTL(HDIO_SET_32BIT)
COMPATIBLE_IOCTL(HDIO_SET_MULTCOUNT)
COMPATIBLE_IOCTL(HDIO_DRIVE_CMD)
COMPATIBLE_IOCTL(HDIO_SET_PIO_MODE)
COMPATIBLE_IOCTL(HDIO_SCAN_HWIF)
COMPATIBLE_IOCTL(HDIO_SET_NICE)
/* 0x02 -- Floppy ioctls */
COMPATIBLE_IOCTL(FDMSGON)
......
......@@ -3059,7 +3059,6 @@ COMPATIBLE_IOCTL(HDIO_SET_32BIT)
COMPATIBLE_IOCTL(HDIO_SET_MULTCOUNT)
COMPATIBLE_IOCTL(HDIO_DRIVE_CMD)
COMPATIBLE_IOCTL(HDIO_SET_PIO_MODE)
COMPATIBLE_IOCTL(HDIO_SCAN_HWIF)
COMPATIBLE_IOCTL(HDIO_SET_NICE)
/* 0x02 -- Floppy ioctls */
COMPATIBLE_IOCTL(FDMSGON)
......
......@@ -251,10 +251,6 @@ CONFIG_IDEDMA_NEW_DRIVE_LISTINGS
be (U)DMA capable but aren't. This is a blanket on/off test with no
speed limit options.
Straight GNU GCC 2.7.3/2.8.X compilers are known to be safe;
whereas, many versions of EGCS have a problem and miscompile if you
say Y here.
If in doubt, say N.
CONFIG_BLK_DEV_IDEDMA_TIMEOUT
......@@ -319,10 +315,6 @@ CONFIG_IDEDMA_PCI_WIP
It is SAFEST to say N to this question.
CONFIG_BLK_DEV_ADMA
Please read the comments at the top of
<file:drivers/ide/ide-adma.c>.
CONFIG_BLK_DEV_PDC_ADMA
Please read the comments at the top of <file:drivers/ide/ide-pci.c>.
......@@ -515,10 +507,16 @@ CONFIG_PDC202XX_FORCE
For FastTrak enable overriding BIOS.
CONFIG_BLK_DEV_SIS5513
This driver ensures (U)DMA support for SIS5513 chipset based
mainboards. SiS620/530 UDMA mode 4, SiS5600/5597 UDMA mode 2, all
other DMA mode 2 limited chipsets are unsupported to date.
This driver ensures (U)DMA support for SIS5513 chipset family based
mainboards.
The following chipsets are supported:
ATA16: SiS5511, SiS5513
ATA33: SiS5591, SiS5597, SiS5598, SiS5600
ATA66: SiS530, SiS540, SiS620, SiS630, SiS640
ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
SiS745, SiS750
If you say Y here, you need to say Y to "Use DMA by default when
available" as well.
......
......@@ -4,7 +4,7 @@
# Andre Hedrick <andre@linux-ide.org>
#
mainmenu_option next_comment
comment 'IDE, ATA and ATAPI Block devices'
comment 'ATA and ATAPI Block devices'
dep_tristate 'Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support' CONFIG_BLK_DEV_IDE $CONFIG_IDE
comment 'Please see Documentation/ide.txt for help/info on IDE drives'
......@@ -34,121 +34,120 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_tristate ' SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_BLK_DEV_IDE $CONFIG_SCSI
comment 'IDE chipset support'
if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_bool ' CMD640 chipset bugfix/support' CONFIG_BLK_DEV_CMD640 $CONFIG_X86
dep_bool ' CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640
dep_bool ' ISA-PNP EIDE support' CONFIG_BLK_DEV_ISAPNP $CONFIG_ISAPNP
if [ "$CONFIG_PCI" = "y" ]; then
dep_bool ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86
bool ' Generic PCI IDE chipset support' CONFIG_BLK_DEV_IDEPCI
if [ "$CONFIG_BLK_DEV_IDEPCI" = "y" ]; then
bool ' Sharing PCI IDE interrupts support' CONFIG_IDEPCI_SHARE_IRQ
bool ' Generic PCI bus-master DMA support' CONFIG_BLK_DEV_IDEDMA_PCI
bool ' Boot off-board chipsets first support' CONFIG_BLK_DEV_OFFBOARD
dep_bool ' Use PCI DMA by default when available' CONFIG_IDEDMA_PCI_AUTO $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Enable DMA only for disks ' CONFIG_IDEDMA_ONLYDISK $CONFIG_IDEDMA_PCI_AUTO
define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' ATA Work(s) In Progress (EXPERIMENTAL)' CONFIG_IDEDMA_PCI_WIP $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
dep_bool ' Attempt to HACK around Chipsets that TIMEOUT (WIP)' CONFIG_BLK_DEV_IDEDMA_TIMEOUT $CONFIG_IDEDMA_PCI_WIP
dep_bool ' Good-Bad DMA Model-Firmware (WIP)' CONFIG_IDEDMA_NEW_DRIVE_LISTINGS $CONFIG_IDEDMA_PCI_WIP
# dep_bool ' Asynchronous DMA support (WIP) (EXPERIMENTAL)' CONFIG_BLK_DEV_ADMA $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_IDEDMA_PCI_WIP
define_bool CONFIG_BLK_DEV_ADMA $CONFIG_BLK_DEV_IDEDMA_PCI
# dep_bool ' Tag Command Queue DMA support (WIP) (EXPERIMENTAL)' CONFIG_BLK_DEV_IDEDMA_TCQ $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_IDEDMA_PCI_WIP
dep_bool ' AEC62XX chipset support' CONFIG_BLK_DEV_AEC62XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' AEC62XX Tuning support' CONFIG_AEC62XX_TUNING $CONFIG_BLK_DEV_AEC62XX
dep_bool ' ALI M15x3 chipset support' CONFIG_BLK_DEV_ALI15X3 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' ALI M15x3 WDC support (DANGEROUS)' CONFIG_WDC_ALI15X3 $CONFIG_BLK_DEV_ALI15X3
dep_bool ' AMD Viper support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' AMD Viper ATA-66 Override (WIP)' CONFIG_AMD74XX_OVERRIDE $CONFIG_BLK_DEV_AMD74XX $CONFIG_IDEDMA_PCI_WIP
dep_bool ' CMD64X chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' CY82C693 chipset support' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' HPT34X AUTODMA support (WIP)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_IDEDMA_PCI_WIP
dep_bool ' HPT366 chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
dep_mbool ' Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' PIIXn Tuning support' CONFIG_PIIX_TUNING $CONFIG_BLK_DEV_PIIX $CONFIG_IDEDMA_PCI_AUTO
fi
if [ "$CONFIG_MIPS_ITE8172" = "y" -o "$CONFIG_MIPS_IVR" = "y" ]; then
dep_mbool ' IT8172 IDE support' CONFIG_BLK_DEV_IT8172 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' IT8172 IDE Tuning support' CONFIG_IT8172_TUNING $CONFIG_BLK_DEV_IT8172 $CONFIG_IDEDMA_PCI_AUTO
fi
dep_bool ' NS87415 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_NS87415 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' OPTi 82C621 chipset enhanced support (EXPERIMENTAL)' CONFIG_BLK_DEV_OPTI621 $CONFIG_EXPERIMENTAL
dep_mbool ' Pacific Digital A-DMA support (EXPERIMENTAL)' CONFIG_BLK_DEV_PDC_ADMA $CONFIG_BLK_DEV_ADMA $CONFIG_IDEDMA_PCI_WIP
dep_bool ' PROMISE PDC202{46|62|65|67|68|69|70} support' CONFIG_BLK_DEV_PDC202XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Special UDMA Feature' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX
dep_bool ' Special FastTrak Feature' CONFIG_PDC202XX_FORCE $CONFIG_BLK_DEV_PDC202XX
dep_bool ' ServerWorks OSB4/CSB5 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' Tekram TRM290 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' VIA82CXXX chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
fi
if [ "$CONFIG_PPC" = "y" -o "$CONFIG_ARM" = "y" ]; then
bool ' Winbond SL82c105 support' CONFIG_BLK_DEV_SL82C105
fi
fi
if [ "$CONFIG_ALL_PPC" = "y" ]; then
bool ' Builtin PowerMac IDE support' CONFIG_BLK_DEV_IDE_PMAC
dep_bool ' PowerMac IDE DMA support' CONFIG_BLK_DEV_IDEDMA_PMAC $CONFIG_BLK_DEV_IDE_PMAC
dep_bool ' Use DMA by default' CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO $CONFIG_BLK_DEV_IDEDMA_PMAC
if [ "$CONFIG_BLK_DEV_IDE_PMAC" = "y" ]; then
define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PMAC
dep_bool ' CMD640 chipset bugfix/support' CONFIG_BLK_DEV_CMD640 $CONFIG_X86
dep_bool ' CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640
dep_bool ' ISA-PNP EIDE support' CONFIG_BLK_DEV_ISAPNP $CONFIG_ISAPNP
if [ "$CONFIG_PCI" = "y" ]; then
dep_bool ' RZ1000 chipset bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86
bool ' Generic PCI IDE chipset support' CONFIG_BLK_DEV_IDEPCI
if [ "$CONFIG_BLK_DEV_IDEPCI" = "y" ]; then
bool ' Boot off-board chipsets first support' CONFIG_BLK_DEV_OFFBOARD
bool ' Sharing PCI IDE interrupts support' CONFIG_IDEPCI_SHARE_IRQ
bool ' Generic PCI bus-master DMA support' CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Use PCI DMA by default when available' CONFIG_IDEDMA_PCI_AUTO $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Enable DMA only for disks ' CONFIG_IDEDMA_ONLYDISK $CONFIG_IDEDMA_PCI_AUTO
define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' ATA Work(s) In Progress (EXPERIMENTAL)' CONFIG_IDEDMA_PCI_WIP $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
dep_bool ' Attempt to HACK around Chipsets that TIMEOUT (WIP)' CONFIG_BLK_DEV_IDEDMA_TIMEOUT $CONFIG_IDEDMA_PCI_WIP
dep_bool ' Good-Bad DMA Model-Firmware (WIP)' CONFIG_IDEDMA_NEW_DRIVE_LISTINGS $CONFIG_IDEDMA_PCI_WIP
dep_bool ' AEC62XX chipset support' CONFIG_BLK_DEV_AEC62XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' AEC62XX Tuning support' CONFIG_AEC62XX_TUNING $CONFIG_BLK_DEV_AEC62XX
dep_bool ' ALI M15x3 chipset support' CONFIG_BLK_DEV_ALI15X3 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' ALI M15x3 WDC support (DANGEROUS)' CONFIG_WDC_ALI15X3 $CONFIG_BLK_DEV_ALI15X3
dep_bool ' AMD Viper support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' AMD Viper ATA-66 Override (WIP)' CONFIG_AMD74XX_OVERRIDE $CONFIG_BLK_DEV_AMD74XX $CONFIG_IDEDMA_PCI_WIP
dep_bool ' CMD64X chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' CY82C693 chipset support' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' HPT34X AUTODMA support (WIP)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_IDEDMA_PCI_WIP
dep_bool ' HPT366 chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
dep_mbool ' Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' PIIXn Tuning support' CONFIG_PIIX_TUNING $CONFIG_BLK_DEV_PIIX $CONFIG_IDEDMA_PCI_AUTO
fi
if [ "$CONFIG_BLK_DEV_IDEDMA_PMAC" = "y" ]; then
define_bool CONFIG_BLK_DEV_IDEPCI $CONFIG_BLK_DEV_IDEDMA_PMAC
if [ "$CONFIG_MIPS_ITE8172" = "y" -o "$CONFIG_MIPS_IVR" = "y" ]; then
dep_mbool ' IT8172 IDE support' CONFIG_BLK_DEV_IT8172 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' IT8172 IDE Tuning support' CONFIG_IT8172_TUNING $CONFIG_BLK_DEV_IT8172 $CONFIG_IDEDMA_PCI_AUTO
fi
dep_bool ' NS87415 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_NS87415 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' OPTi 82C621 chipset enhanced support (EXPERIMENTAL)' CONFIG_BLK_DEV_OPTI621 $CONFIG_EXPERIMENTAL
dep_mbool ' Pacific Digital A-DMA support (EXPERIMENTAL)' CONFIG_BLK_DEV_PDC_ADMA $CONFIG_IDEDMA_PCI_WIP
dep_bool ' PROMISE PDC202{46|62|65|67|68|69|70} support' CONFIG_BLK_DEV_PDC202XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Special UDMA Feature' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX
dep_bool ' Special FastTrak Feature' CONFIG_PDC202XX_FORCE $CONFIG_BLK_DEV_PDC202XX
dep_bool ' ServerWorks OSB4/CSB5 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
dep_bool ' Tekram TRM290 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' VIA82CXXX chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
fi
if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
dep_bool ' ICS IDE interface support' CONFIG_BLK_DEV_IDE_ICSIDE $CONFIG_ARCH_ACORN
dep_bool ' ICS DMA support' CONFIG_BLK_DEV_IDEDMA_ICS $CONFIG_BLK_DEV_IDE_ICSIDE
dep_bool ' Use ICS DMA by default' CONFIG_IDEDMA_ICS_AUTO $CONFIG_BLK_DEV_IDEDMA_ICS
define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_ICS
dep_bool ' RapIDE interface support' CONFIG_BLK_DEV_IDE_RAPIDE $CONFIG_ARCH_ACORN
fi
if [ "$CONFIG_AMIGA" = "y" ]; then
dep_bool ' Amiga Gayle IDE interface support' CONFIG_BLK_DEV_GAYLE $CONFIG_AMIGA
dep_mbool ' Amiga IDE Doubler support (EXPERIMENTAL)' CONFIG_BLK_DEV_IDEDOUBLER $CONFIG_BLK_DEV_GAYLE $CONFIG_EXPERIMENTAL
fi
if [ "$CONFIG_ZORRO" = "y" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then
dep_mbool ' Buddha/Catweasel IDE interface support (EXPERIMENTAL)' CONFIG_BLK_DEV_BUDDHA $CONFIG_ZORRO $CONFIG_EXPERIMENTAL
fi
if [ "$CONFIG_ATARI" = "y" ]; then
dep_bool ' Falcon IDE interface support' CONFIG_BLK_DEV_FALCON_IDE $CONFIG_ATARI
fi
if [ "$CONFIG_MAC" = "y" ]; then
dep_bool ' Macintosh Quadra/Powerbook IDE interface support' CONFIG_BLK_DEV_MAC_IDE $CONFIG_MAC
if [ "$CONFIG_PPC" = "y" -o "$CONFIG_ARM" = "y" ]; then
bool ' Winbond SL82c105 support' CONFIG_BLK_DEV_SL82C105
fi
if [ "$CONFIG_Q40" = "y" ]; then
dep_bool ' Q40/Q60 IDE interface support' CONFIG_BLK_DEV_Q40IDE $CONFIG_Q40
fi
if [ "$CONFIG_ALL_PPC" = "y" ]; then
bool ' Builtin PowerMac IDE support' CONFIG_BLK_DEV_IDE_PMAC
dep_bool ' PowerMac IDE DMA support' CONFIG_BLK_DEV_IDEDMA_PMAC $CONFIG_BLK_DEV_IDE_PMAC
dep_bool ' Use DMA by default' CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO $CONFIG_BLK_DEV_IDEDMA_PMAC
if [ "$CONFIG_BLK_DEV_IDE_PMAC" = "y" ]; then
define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PMAC
fi
if [ "$CONFIG_8xx" = "y" ]; then
dep_bool ' MPC8xx IDE support' CONFIG_BLK_DEV_MPC8xx_IDE $CONFIG_8xx
if [ "$CONFIG_BLK_DEV_IDEDMA_PMAC" = "y" ]; then
define_bool CONFIG_BLK_DEV_IDEPCI $CONFIG_BLK_DEV_IDEDMA_PMAC
fi
fi
if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
dep_bool ' ICS IDE interface support' CONFIG_BLK_DEV_IDE_ICSIDE $CONFIG_ARCH_ACORN
dep_bool ' ICS DMA support' CONFIG_BLK_DEV_IDEDMA_ICS $CONFIG_BLK_DEV_IDE_ICSIDE
dep_bool ' Use ICS DMA by default' CONFIG_IDEDMA_ICS_AUTO $CONFIG_BLK_DEV_IDEDMA_ICS
define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_ICS
dep_bool ' RapIDE interface support' CONFIG_BLK_DEV_IDE_RAPIDE $CONFIG_ARCH_ACORN
fi
if [ "$CONFIG_AMIGA" = "y" ]; then
dep_bool ' Amiga Gayle IDE interface support' CONFIG_BLK_DEV_GAYLE $CONFIG_AMIGA
dep_mbool ' Amiga IDE Doubler support (EXPERIMENTAL)' CONFIG_BLK_DEV_IDEDOUBLER $CONFIG_BLK_DEV_GAYLE $CONFIG_EXPERIMENTAL
fi
if [ "$CONFIG_ZORRO" = "y" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then
dep_mbool ' Buddha/Catweasel IDE interface support (EXPERIMENTAL)' CONFIG_BLK_DEV_BUDDHA $CONFIG_ZORRO $CONFIG_EXPERIMENTAL
fi
if [ "$CONFIG_ATARI" = "y" ]; then
dep_bool ' Falcon IDE interface support' CONFIG_BLK_DEV_FALCON_IDE $CONFIG_ATARI
fi
if [ "$CONFIG_MAC" = "y" ]; then
dep_bool ' Macintosh Quadra/Powerbook IDE interface support' CONFIG_BLK_DEV_MAC_IDE $CONFIG_MAC
fi
if [ "$CONFIG_Q40" = "y" ]; then
dep_bool ' Q40/Q60 IDE interface support' CONFIG_BLK_DEV_Q40IDE $CONFIG_Q40
fi
if [ "$CONFIG_8xx" = "y" ]; then
dep_bool ' MPC8xx IDE support' CONFIG_BLK_DEV_MPC8xx_IDE $CONFIG_8xx
fi
if [ "$CONFIG_BLK_DEV_MPC8xx_IDE" = "y" ]; then
choice 'Type of MPC8xx IDE interface' \
"8xx_PCCARD CONFIG_IDE_8xx_PCCARD \
8xx_DIRECT CONFIG_IDE_8xx_DIRECT \
EXT_DIRECT CONFIG_IDE_EXT_DIRECT" 8xx_PCCARD
fi
if [ "$CONFIG_BLK_DEV_MPC8xx_IDE" = "y" ]; then
choice 'Type of MPC8xx IDE interface' \
"8xx_PCCARD CONFIG_IDE_8xx_PCCARD \
8xx_DIRECT CONFIG_IDE_8xx_DIRECT \
EXT_DIRECT CONFIG_IDE_EXT_DIRECT" 8xx_PCCARD
fi
bool ' Other IDE chipset support' CONFIG_IDE_CHIPSETS
if [ "$CONFIG_IDE_CHIPSETS" = "y" ]; then
comment 'Note: most of these also require special kernel boot parameters'
bool ' ALI M14xx support' CONFIG_BLK_DEV_ALI14XX
bool ' DTC-2278 support' CONFIG_BLK_DEV_DTC2278
bool ' Holtek HT6560B support' CONFIG_BLK_DEV_HT6560B
if [ "$CONFIG_BLK_DEV_IDEDISK" = "y" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then
bool ' PROMISE DC4030 support (EXPERIMENTAL)' CONFIG_BLK_DEV_PDC4030
fi
bool ' QDI QD65xx support' CONFIG_BLK_DEV_QD65XX
bool ' UMC-8672 support' CONFIG_BLK_DEV_UMC8672
bool ' Other IDE chipset support' CONFIG_IDE_CHIPSETS
if [ "$CONFIG_IDE_CHIPSETS" = "y" ]; then
comment 'Note: most of these also require special kernel boot parameters'
bool ' ALI M14xx support' CONFIG_BLK_DEV_ALI14XX
bool ' DTC-2278 support' CONFIG_BLK_DEV_DTC2278
bool ' Holtek HT6560B support' CONFIG_BLK_DEV_HT6560B
if [ "$CONFIG_BLK_DEV_IDEDISK" = "y" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then
bool ' PROMISE DC4030 support (EXPERIMENTAL)' CONFIG_BLK_DEV_PDC4030
fi
bool ' QDI QD65xx support' CONFIG_BLK_DEV_QD65XX
bool ' UMC-8672 support' CONFIG_BLK_DEV_UMC8672
fi
if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" = "y" -o \
"$CONFIG_BLK_DEV_IDEDMA_PMAC" = "y" -o \
"$CONFIG_BLK_DEV_IDEDMA_ICS" = "y" ]; then
bool ' IGNORE word93 Validation BITS' CONFIG_IDEDMA_IVB
fi
else
bool 'Old hard disk (MFM/RLL/IDE) driver' CONFIG_BLK_DEV_HD_ONLY
......@@ -163,12 +162,6 @@ else
define_bool CONFIG_IDEDMA_AUTO n
fi
if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" = "y" -o \
"$CONFIG_BLK_DEV_IDEDMA_PMAC" = "y" -o \
"$CONFIG_BLK_DEV_IDEDMA_ICS" = "y" ]; then
bool ' IGNORE word93 Validation BITS' CONFIG_IDEDMA_IVB
fi
if [ "$CONFIG_BLK_DEV_TIVO" = "y" ]; then
define_bool CONFIG_DMA_NONPCI y
else
......
......@@ -44,7 +44,6 @@ ide-obj-$(CONFIG_BLK_DEV_HPT34X) += hpt34x.o
ide-obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o
ide-obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o
ide-obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o
ide-obj-$(CONFIG_BLK_DEV_ADMA) += ide-adma.o
ide-obj-$(CONFIG_BLK_DEV_IDEDMA_PCI) += ide-dma.o
ide-obj-$(CONFIG_BLK_DEV_IDEPCI) += ide-pci.o
ide-obj-$(CONFIG_BLK_DEV_ISAPNP) += ide-pnp.o
......
/*
* linux/drivers/ide/ide-adma.c Version 0.00 June 24, 2001
*
* Copyright (c) 2001 Andre Hedrick <andre@linux-ide.org>
*
* Asynchronous DMA -- TBA, this is a holding file.
*
*/
......@@ -2508,6 +2508,11 @@ static int ide_cdrom_register (ide_drive_t *drive, int nslots)
if (!CDROM_CONFIG_FLAGS (drive)->close_tray)
devinfo->mask |= CDC_CLOSE_TRAY;
/* FIXME: I'm less that sure that this is the proper thing to do, since
* ware already adding the devices to devfs int ide.c upon device
* registration.
*/
devinfo->de = devfs_register(drive->de, "cd", DEVFS_FL_DEFAULT,
HWIF(drive)->major, minor,
S_IFBLK | S_IRUGO | S_IWUGO,
......
......@@ -401,7 +401,7 @@ void ide_release(u_long arg)
DEBUG(0, "ide_release(0x%p)\n", link);
if (info->ndev) {
ide_unregister(info->hd);
ide_unregister(&ide_hwifs[info->hd]);
MOD_DEC_USE_COUNT;
}
......
......@@ -707,8 +707,11 @@ int ide_dmaproc (ide_dma_action_t func, ide_drive_t *drive)
/*
* Needed for allowing full modular support of ide-driver
*/
int ide_release_dma (ide_hwif_t *hwif)
int ide_release_dma(ide_hwif_t *hwif)
{
if (!hwif->dma_base)
return;
if (hwif->dmatable_cpu) {
pci_free_consistent(hwif->pci_dev,
PRD_ENTRIES * PRD_BYTES,
......@@ -723,6 +726,8 @@ int ide_release_dma (ide_hwif_t *hwif)
if ((hwif->dma_extra) && (hwif->channel == 0))
release_region((hwif->dma_base + 16), hwif->dma_extra);
release_region(hwif->dma_base, 8);
hwif->dma_base = 0;
return 1;
}
......
......@@ -6,15 +6,8 @@
*/
/*
* This module provides support for automatic detection and
* configuration of all PCI IDE interfaces present in a system.
*/
/*
* Chipsets that are on the IDE_IGNORE list because of problems of not being
* set at compile time.
*
* CONFIG_BLK_DEV_PDC202XX
* This module provides support for automatic detection and configuration of
* all PCI ATA host chip chanells interfaces present in a system.
*/
#include <linux/config.h>
......@@ -34,8 +27,14 @@
#define PCI_VENDOR_ID_HINT 0x3388
#define PCI_DEVICE_ID_HINT 0x8013
#define IDE_IGNORE ((void *)-1)
#define IDE_NO_DRIVER ((void *)-2)
/*
* Some combi chips, which can be used on the PCI bus or the VL bus can be in
* some systems acessed either through the PCI config space or through the
* hosts IO bus. If the corresponding initialization driver is using the host
* IO space to deal with them please define the following.
*/
#define ATA_PCI_IGNORE ((void *)-1)
#ifdef CONFIG_BLK_DEV_AEC62XX
extern unsigned int pci_init_aec62xx(struct pci_dev *);
......@@ -306,7 +305,7 @@ static ide_pci_device_t pci_chipsets[] __initdata = {
* but which still need some generic quirk handling.
*/
{PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_640, NULL, NULL, IDE_IGNORE, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_640, NULL, NULL, ATA_PCI_IGNORE, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410, NULL, NULL, NULL, NULL, {{0x43,0x08,0x08}, {0x47,0x08,0x08}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
{PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
......@@ -314,7 +313,7 @@ static ide_pci_device_t pci_chipsets[] __initdata = {
{PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_FIXIRQ },
{PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_FIXIRQ },
{PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_NOADMA },
{PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366, NULL, NULL, IDE_NO_DRIVER, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 240, ATA_F_IRQ | ATA_F_HPTHACK },
{PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 240, ATA_F_IRQ | ATA_F_HPTHACK },
{0, 0, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0 }};
/*
......@@ -683,11 +682,6 @@ static void __init setup_pci_device(struct pci_dev *dev, ide_pci_device_t *d)
autodma = 1;
#endif
if (d->init_hwif == IDE_NO_DRIVER) {
printk(KERN_WARNING "%s: detected chipset, but driver not compiled in!\n", dev->name);
d->init_hwif = NULL;
}
if (pci_enable_device(dev)) {
printk(KERN_WARNING "%s: Could not enable PCI device.\n", dev->name);
return;
......@@ -883,11 +877,11 @@ static void __init hpt366_device_order_fixup (struct pci_dev *dev, ide_pci_devic
* This finds all PCI IDE controllers and calls appropriate initialization
* functions for them.
*/
static void __init ide_scan_pcidev(struct pci_dev *dev)
static void __init scan_pcidev(struct pci_dev *dev)
{
unsigned short vendor;
unsigned short device;
ide_pci_device_t *d;
ide_pci_device_t *d;
vendor = dev->vendor;
device = dev->device;
......@@ -898,7 +892,7 @@ static void __init ide_scan_pcidev(struct pci_dev *dev)
while (d->vendor && !(d->vendor == vendor && d->device == device))
++d;
if (d->init_hwif == IDE_IGNORE)
if (d->init_hwif == ATA_PCI_IGNORE)
printk("%s: has been ignored by PCI bus scan\n", dev->name);
else if ((d->vendor == PCI_VENDOR_ID_OPTI && d->device == PCI_DEVICE_ID_OPTI_82C558) && !(PCI_FUNC(dev->devfn) & 1))
return;
......@@ -927,12 +921,10 @@ void __init ide_scan_pcibus (int scan_direction)
struct pci_dev *dev;
if (!scan_direction) {
pci_for_each_dev(dev) {
ide_scan_pcidev(dev);
}
pci_for_each_dev(dev)
scan_pcidev(dev);
} else {
pci_for_each_dev_reverse(dev) {
ide_scan_pcidev(dev);
}
pci_for_each_dev_reverse(dev)
scan_pcidev(dev);
}
}
......@@ -576,18 +576,19 @@ static void ide_init_queue(ide_drive_t *drive)
{
request_queue_t *q = &drive->queue;
int max_sectors;
#ifdef CONFIG_BLK_DEV_PDC4030
int is_pdc4030_chipset = (HWIF(drive)->chipset == ide_pdc4030);
#else
const int is_pdc4030_chipset = 0;
#endif
q->queuedata = HWGROUP(drive);
blk_init_queue(q, do_ide_request, &ide_lock);
blk_queue_segment_boundary(q, 0xffff);
/* IDE can do up to 128K per request, pdc4030 needs smaller limit */
max_sectors = (is_pdc4030_chipset ? 127 : 255);
#ifdef CONFIG_BLK_DEV_PDC4030
if (HWIF(drive)->chipset == ide_pdc4030)
max_sectors = 127;
else
#else
max_sectors = 255;
#endif
blk_queue_max_sectors(q, max_sectors);
/* IDE DMA can do PRD_ENTRIES number of segments. */
......
......@@ -445,7 +445,7 @@ static inline void set_recovery_timer (ide_hwif_t *hwif)
/*
* Do not even *think* about calling this!
*/
static void init_hwif_data (unsigned int index)
static void init_hwif_data(ide_hwif_t *hwif, int index)
{
static const byte ide_major[] = {
IDE0_MAJOR, IDE1_MAJOR, IDE2_MAJOR, IDE3_MAJOR, IDE4_MAJOR,
......@@ -454,7 +454,6 @@ static void init_hwif_data (unsigned int index)
unsigned int unit;
hw_regs_t hw;
ide_hwif_t *hwif = &ide_hwifs[index];
/* bulk initialize hwif & drive info with zeros */
memset(hwif, 0, sizeof(ide_hwif_t));
......@@ -507,7 +506,7 @@ static void init_hwif_data (unsigned int index)
#define MAGIC_COOKIE 0x12345678
static void __init init_ide_data (void)
{
unsigned int index;
unsigned int h;
static unsigned long magic_cookie = MAGIC_COOKIE;
if (magic_cookie != MAGIC_COOKIE)
......@@ -515,8 +514,8 @@ static void __init init_ide_data (void)
magic_cookie = 0;
/* Initialize all interface structures */
for (index = 0; index < MAX_HWIFS; ++index)
init_hwif_data(index);
for (h = 0; h < MAX_HWIFS; ++h)
init_hwif_data(&ide_hwifs[h], h);
/* Add default hw interfaces */
ide_init_default_hwifs();
......@@ -1629,7 +1628,7 @@ void ide_dma_timeout_retry(ide_drive_t *drive)
* But note that it can also be invoked as a result of a "sleep" operation
* triggered by the mod_timer() call in ide_do_request.
*/
void ide_timer_expiry (unsigned long data)
void ide_timer_expiry(unsigned long data)
{
ide_hwgroup_t *hwgroup = (ide_hwgroup_t *) data;
ide_handler_t *handler;
......@@ -1667,7 +1666,7 @@ void ide_timer_expiry (unsigned long data)
if ((expiry = hwgroup->expiry) != NULL) {
/* continue */
if ((wait = expiry(drive)) != 0) {
/* reset timer */
/* reengage timer */
hwgroup->timer.expires = jiffies + wait;
add_timer(&hwgroup->timer);
spin_unlock_irqrestore(&ide_lock, flags);
......@@ -1869,13 +1868,13 @@ void ide_intr (int irq, void *dev_id, struct pt_regs *regs)
*/
ide_drive_t *get_info_ptr (kdev_t i_rdev)
{
int major = major(i_rdev);
unsigned int h;
unsigned int major = major(i_rdev);
int h;
for (h = 0; h < MAX_HWIFS; ++h) {
ide_hwif_t *hwif = &ide_hwifs[h];
if (hwif->present && major == hwif->major) {
unsigned unit = DEVICE_NR(i_rdev);
int unit = DEVICE_NR(i_rdev);
if (unit < MAX_DRIVES) {
ide_drive_t *drive = &hwif->drives[unit];
if (drive->present)
......@@ -2012,13 +2011,13 @@ void revalidate_drives(void)
{
ide_hwif_t *hwif;
ide_drive_t *drive;
int index;
int unit;
int h;
for (index = 0; index < MAX_HWIFS; ++index) {
hwif = &ide_hwifs[index];
for (h = 0; h < MAX_HWIFS; ++h) {
int unit;
hwif = &ide_hwifs[h];
for (unit = 0; unit < MAX_DRIVES; ++unit) {
drive = &ide_hwifs[index].drives[unit];
drive = &ide_hwifs[h].drives[unit];
if (drive->revalidate) {
drive->revalidate = 0;
if (!initializing)
......@@ -2164,22 +2163,19 @@ static void hwif_unregister(ide_hwif_t *hwif)
#endif
}
void ide_unregister (unsigned int index)
void ide_unregister(ide_hwif_t *hwif)
{
struct gendisk *gd;
ide_drive_t *drive, *d;
ide_hwif_t *hwif, *g;
ide_hwif_t *g;
ide_hwgroup_t *hwgroup;
int irq_count = 0, unit, i;
unsigned long flags;
unsigned int p, minor;
ide_hwif_t old_hwif;
if (index >= MAX_HWIFS)
return;
save_flags(flags); /* all CPUs */
cli(); /* all CPUs */
hwif = &ide_hwifs[index];
if (!hwif->present)
goto abort;
put_device(&hwif->device);
......@@ -2202,7 +2198,7 @@ void ide_unregister (unsigned int index)
/*
* All clear? Then blow away the buffer cache
*/
sti();
spin_lock_irqsave(&ide_lock, flags);
for (unit = 0; unit < MAX_DRIVES; ++unit) {
drive = &hwif->drives[unit];
if (!drive->present)
......@@ -2214,11 +2210,13 @@ void ide_unregister (unsigned int index)
invalidate_device(devp, 0);
}
}
}
#ifdef CONFIG_PROC_FS
destroy_proc_ide_drives(hwif);
destroy_proc_ide_drives(hwif);
#endif
}
cli();
spin_unlock_irqrestore(&ide_lock, flags);
hwgroup = hwif->hwgroup;
/*
......@@ -2271,11 +2269,8 @@ void ide_unregister (unsigned int index)
hwgroup->hwif = HWIF(hwgroup->drive);
#if defined(CONFIG_BLK_DEV_IDEDMA) && !defined(CONFIG_DMA_NONPCI)
if (hwif->dma_base) {
(void) ide_release_dma(hwif);
hwif->dma_base = 0;
}
#endif /* (CONFIG_BLK_DEV_IDEDMA) && !(CONFIG_DMA_NONPCI) */
ide_release_dma(hwif);
#endif
/*
* Remove us from the kernel's knowledge
......@@ -2297,8 +2292,14 @@ void ide_unregister (unsigned int index)
kfree(gd);
hwif->gd = NULL;
}
/*
* Reinitialize the hwif handler, but preserve any special methods for
* it.
*/
old_hwif = *hwif;
init_hwif_data(index); /* restore hwif data to pristine status */
init_hwif_data(hwif, hwif->index);
hwif->hwgroup = old_hwif.hwgroup;
hwif->tuneproc = old_hwif.tuneproc;
hwif->speedproc = old_hwif.speedproc;
......@@ -2390,12 +2391,11 @@ int ide_register_hw(hw_regs_t *hw, ide_hwif_t **hwifp)
goto found;
}
for (index = 0; index < MAX_HWIFS; index++)
ide_unregister(index);
ide_unregister(&ide_hwifs[index]);
} while (retry--);
return -1;
found:
if (hwif->present)
ide_unregister(index);
ide_unregister(hwif);
if (hwif->present)
return -1;
memcpy(&hwif->hw, hw, sizeof(*hw));
......@@ -2756,21 +2756,6 @@ static int ide_ioctl (struct inode *inode, struct file *file,
return -EACCES;
return ide_task_ioctl(drive, inode, file, cmd, arg);
case HDIO_SCAN_HWIF:
{
int args[3];
if (!capable(CAP_SYS_ADMIN)) return -EACCES;
if (copy_from_user(args, (void *)arg, 3 * sizeof(int)))
return -EFAULT;
if (ide_register(args[0], args[1], args[2]) == -1)
return -EIO;
return 0;
}
case HDIO_UNREGISTER_HWIF:
if (!capable(CAP_SYS_ADMIN)) return -EACCES;
/* (arg > MAX_HWIFS) checked in function */
ide_unregister(arg);
return 0;
case HDIO_SET_NICE:
if (!capable(CAP_SYS_ADMIN)) return -EACCES;
if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1))))
......@@ -3479,6 +3464,7 @@ struct block_device_operations ide_fops[] = {{
revalidate: ide_revalidate_disk
}};
EXPORT_SYMBOL(ide_fops);
EXPORT_SYMBOL(ide_hwifs);
EXPORT_SYMBOL(ide_spin_wait_hwgroup);
EXPORT_SYMBOL(revalidate_drives);
......@@ -3490,7 +3476,6 @@ devfs_handle_t ide_devfs_handle;
EXPORT_SYMBOL(ide_lock);
EXPORT_SYMBOL(drive_is_flashcard);
EXPORT_SYMBOL(ide_timer_expiry);
EXPORT_SYMBOL(ide_intr);
EXPORT_SYMBOL(ide_get_queue);
EXPORT_SYMBOL(ide_add_generic_settings);
......@@ -3584,7 +3569,7 @@ static struct notifier_block ide_notifier = {
*/
static int __init ata_module_init(void)
{
int i;
int h;
printk(KERN_INFO "Uniform Multi-Platform E-IDE driver ver.:" VERSION "\n");
......@@ -3714,8 +3699,8 @@ static int __init ata_module_init(void)
initializing = 0;
for (i = 0; i < MAX_HWIFS; ++i) {
ide_hwif_t *hwif = &ide_hwifs[i];
for (h = 0; h < MAX_HWIFS; ++h) {
ide_hwif_t *hwif = &ide_hwifs[h];
if (hwif->present)
ide_geninit(hwif);
}
......@@ -3750,21 +3735,17 @@ static int __init init_ata (void)
static void __exit cleanup_ata (void)
{
int index;
int h;
unregister_reboot_notifier(&ide_notifier);
for (index = 0; index < MAX_HWIFS; ++index) {
ide_unregister(index);
# if defined(CONFIG_BLK_DEV_IDEDMA) && !defined(CONFIG_DMA_NONPCI)
if (ide_hwifs[index].dma_base)
ide_release_dma(&ide_hwifs[index]);
# endif /* (CONFIG_BLK_DEV_IDEDMA) && !(CONFIG_DMA_NONPCI) */
for (h = 0; h < MAX_HWIFS; ++h) {
ide_unregister(&ide_hwifs[h]);
}
# ifdef CONFIG_PROC_FS
proc_ide_destroy();
# endif
devfs_unregister (ide_devfs_handle);
devfs_unregister(ide_devfs_handle);
}
module_init(init_ata);
......
/*
* linux/drivers/ide/sis5513.c Version 0.11 June 9, 2000
* linux/drivers/ide/sis5513.c Version 0.13 March 4, 2002
*
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
* May be copied or modified under the terms of the GNU General Public License
*
* Thanks to SIS Taiwan for direct support and hardware.
* Tested and designed on the SiS620/5513 chipset.
*/
/* Thanks :
* For direct support and hardware : SiS Taiwan.
* For ATA100 support advice : Daniela Engert.
* For checking code correctness, providing patches :
* John Fremlin, Manfred Spraul
*/
/*
* Original tests and design on the SiS620/5513 chipset.
* ATA100 tests and design on the SiS735/5513 chipset.
* ATA16/33 design from specs
*/
/*
* TODO:
* - Get ridden of SisHostChipInfo[] completness dependancy.
* - Get ATA-133 datasheets, implement ATA-133 init code.
* - Are there pre-ATA_16 SiS chips ? -> tune init code for them
* or remove ATA_00 define
* - More checks in the config registers (force values instead of
* relying on the BIOS setting them correctly).
* - Further optimisations ?
* . for example ATA66+ regs 0x48 & 0x4A
*/
#include <linux/config.h>
......@@ -28,88 +52,184 @@
#include "ide_modes.h"
// #define DEBUG
/* if BROKEN_LEVEL is defined it limits the DMA mode
at boot time to its value */
// #define BROKEN_LEVEL XFER_SW_DMA_0
#define DISPLAY_SIS_TIMINGS
#define SIS5513_DEBUG_DRIVE_INFO 0
static struct pci_dev *host_dev = NULL;
/* Miscellaneaous flags */
#define SIS5513_LATENCY 0x01
/* ATA transfer mode capabilities */
#define ATA_00 0x00
#define ATA_16 0x01
#define ATA_33 0x02
#define ATA_66 0x03
#define ATA_100a 0x04
#define ATA_100 0x05
#define ATA_133 0x06
static unsigned char dma_capability = 0x00;
/*
* Debug code: following IDE config registers' changes
*/
#ifdef DEBUG
/* Copy of IDE Config registers 0x00 -> 0x58
Fewer might be used depending on the actual chipset */
static unsigned char ide_regs_copy[] = {
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0
};
static byte sis5513_max_config_register(void) {
switch(dma_capability) {
case ATA_00:
case ATA_16: return 0x4f;
case ATA_33: return 0x52;
case ATA_66:
case ATA_100a:
case ATA_100:
case ATA_133:
default: return 0x57;
}
}
/* Read config registers, print differences from previous read */
static void sis5513_load_verify_registers(struct pci_dev* dev, char* info) {
int i;
byte reg_val;
byte changed=0;
byte max = sis5513_max_config_register();
printk("SIS5513: %s, changed registers:\n", info);
for(i=0; i<=max; i++) {
pci_read_config_byte(dev, i, &reg_val);
if (reg_val != ide_regs_copy[i]) {
printk("%0#x: %0#x -> %0#x\n",
i, ide_regs_copy[i], reg_val);
ide_regs_copy[i]=reg_val;
changed=1;
}
}
#define SIS5513_FLAG_ATA_00 0x00000000
#define SIS5513_FLAG_ATA_16 0x00000001
#define SIS5513_FLAG_ATA_33 0x00000002
#define SIS5513_FLAG_ATA_66 0x00000004
#define SIS5513_FLAG_LATENCY 0x00000010
if (!changed) {
printk("none\n");
}
}
/* Load config registers, no printing */
static void sis5513_load_registers(struct pci_dev* dev) {
int i;
byte max = sis5513_max_config_register();
for(i=0; i<=max; i++) {
pci_read_config_byte(dev, i, &(ide_regs_copy[i]));
}
}
/* Print a register */
static void sis5513_print_register(int reg) {
printk(" %0#x:%0#x", reg, ide_regs_copy[reg]);
}
/* Print valuable registers */
static void sis5513_print_registers(struct pci_dev* dev, char* marker) {
int i;
byte max = sis5513_max_config_register();
sis5513_load_registers(dev);
printk("SIS5513 %s\n", marker);
printk("SIS5513 dump:");
for(i=0x00; i<0x40; i++) {
if ((i % 0x10)==0) printk("\n ");
sis5513_print_register(i);
}
for(; i<49; i++) {
sis5513_print_register(i);
}
printk("\n ");
for(; i<=max; i++) {
sis5513_print_register(i);
}
printk("\n");
}
#endif
/*
* Devices supported
*/
static const struct {
const char *name;
unsigned short host_id;
unsigned int flags;
unsigned char dma_capability;
unsigned char flags;
} SiSHostChipInfo[] = {
{ "SiS530", PCI_DEVICE_ID_SI_530, SIS5513_FLAG_ATA_66, },
{ "SiS540", PCI_DEVICE_ID_SI_540, SIS5513_FLAG_ATA_66, },
{ "SiS620", PCI_DEVICE_ID_SI_620, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS630", PCI_DEVICE_ID_SI_630, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS635", PCI_DEVICE_ID_SI_635, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS640", PCI_DEVICE_ID_SI_640, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS645", PCI_DEVICE_ID_SI_645, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS650", PCI_DEVICE_ID_SI_650, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS730", PCI_DEVICE_ID_SI_730, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS735", PCI_DEVICE_ID_SI_735, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS740", PCI_DEVICE_ID_SI_740, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS745", PCI_DEVICE_ID_SI_745, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS750", PCI_DEVICE_ID_SI_750, SIS5513_FLAG_ATA_66|SIS5513_FLAG_LATENCY, },
{ "SiS5591", PCI_DEVICE_ID_SI_5591, SIS5513_FLAG_ATA_33, },
{ "SiS5597", PCI_DEVICE_ID_SI_5597, SIS5513_FLAG_ATA_33, },
{ "SiS5600", PCI_DEVICE_ID_SI_5600, SIS5513_FLAG_ATA_33, },
{ "SiS5511", PCI_DEVICE_ID_SI_5511, SIS5513_FLAG_ATA_16, },
};
#if 0
static struct _pio_mode_mapping {
byte data_active;
byte recovery;
byte pio_mode;
} pio_mode_mapping[] = {
{ 8, 12, 0 },
{ 6, 7, 1 },
{ 4, 4, 2 },
{ 3, 3, 3 },
{ 3, 1, 4 }
{ "SiS750", PCI_DEVICE_ID_SI_750, ATA_100, SIS5513_LATENCY },
{ "SiS745", PCI_DEVICE_ID_SI_745, ATA_100, SIS5513_LATENCY },
{ "SiS740", PCI_DEVICE_ID_SI_740, ATA_100, SIS5513_LATENCY },
{ "SiS735", PCI_DEVICE_ID_SI_735, ATA_100, SIS5513_LATENCY },
{ "SiS730", PCI_DEVICE_ID_SI_730, ATA_100a, SIS5513_LATENCY },
{ "SiS650", PCI_DEVICE_ID_SI_650, ATA_100, SIS5513_LATENCY },
{ "SiS645", PCI_DEVICE_ID_SI_645, ATA_100, SIS5513_LATENCY },
{ "SiS635", PCI_DEVICE_ID_SI_635, ATA_100, SIS5513_LATENCY },
{ "SiS640", PCI_DEVICE_ID_SI_640, ATA_66, SIS5513_LATENCY },
{ "SiS630", PCI_DEVICE_ID_SI_630, ATA_66, SIS5513_LATENCY },
{ "SiS620", PCI_DEVICE_ID_SI_620, ATA_66, SIS5513_LATENCY },
{ "SiS540", PCI_DEVICE_ID_SI_540, ATA_66, 0},
{ "SiS530", PCI_DEVICE_ID_SI_530, ATA_66, 0},
{ "SiS5600", PCI_DEVICE_ID_SI_5600, ATA_33, 0},
{ "SiS5598", PCI_DEVICE_ID_SI_5598, ATA_33, 0},
{ "SiS5597", PCI_DEVICE_ID_SI_5597, ATA_33, 0},
{ "SiS5591", PCI_DEVICE_ID_SI_5591, ATA_33, 0},
{ "SiS5513", PCI_DEVICE_ID_SI_5513, ATA_16, 0},
{ "SiS5511", PCI_DEVICE_ID_SI_5511, ATA_16, 0},
};
static struct _dma_mode_mapping {
byte data_active;
byte recovery;
byte dma_mode;
} dma_mode_mapping[] = {
{ 8, 8, 0 },
{ 3, 2, 1 },
{ 3, 1, 2 }
/* Cycle time bits and values vary accross chip dma capabilities
These three arrays hold the register layout and the values to set.
Indexed by dma_capability and (dma_mode - XFER_UDMA_0) */
static byte cycle_time_offset[] = {0,0,5,4,4,0,0};
static byte cycle_time_range[] = {0,0,2,3,3,4,4};
static byte cycle_time_value[][XFER_UDMA_5 - XFER_UDMA_0 + 1] = {
{0,0,0,0,0,0}, /* no udma */
{0,0,0,0,0,0}, /* no udma */
{3,2,1,0,0,0},
{7,5,3,2,1,0},
{7,5,3,2,1,0},
{11,7,5,4,2,1},
{0,0,0,0,0,0} /* not yet known, ask SiS */
};
static struct _udma_mode_mapping {
byte cycle_time;
char * udma_mode;
} udma_mode_mapping[] = {
{ 8, "Mode 0" },
{ 6, "Mode 1" },
{ 4, "Mode 2" },
{ 3, "Mode 3" },
{ 2, "Mode 4" },
{ 0, "Mode 5" }
};
static struct pci_dev *host_dev = NULL;
static __inline__ char * find_udma_mode (byte cycle_time)
{
int n;
for (n = 0; n <= 4; n++)
if (udma_mode_mapping[n].cycle_time <= cycle_time)
return udma_mode_mapping[n].udma_mode;
return udma_mode_mapping[4].udma_mode;
}
#endif
/*
* Printing configuration
*/
#if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
......@@ -118,12 +238,12 @@ static int sis_get_info(char *, char **, off_t, int);
extern int (*sis_display_info)(char *, char **, off_t, int); /* ide-proc.c */
static struct pci_dev *bmide_dev;
static char *cable_type[] = {
static char* cable_type[] = {
"80 pins",
"40 pins"
};
static char *recovery_time [] ={
static char* recovery_time[] ={
"12 PCICLK", "1 PCICLK",
"2 PCICLK", "3 PCICLK",
"4 PCICLK", "5 PCICLCK",
......@@ -134,101 +254,184 @@ static char *recovery_time [] ={
"15 PCICLK", "15 PCICLK"
};
static char * cycle_time [] = {
"2 CLK", "2 CLK",
"3 CLK", "4 CLK",
"5 CLK", "6 CLK",
"7 CLK", "8 CLK"
};
static char * active_time [] = {
static char* active_time[] = {
"8 PCICLK", "1 PCICLCK",
"2 PCICLK", "2 PCICLK",
"2 PCICLK", "3 PCICLK",
"4 PCICLK", "5 PCICLK",
"6 PCICLK", "12 PCICLK"
};
static char* cycle_time[] = {
"Reserved", "2 CLK",
"3 CLK", "4 CLK",
"5 CLK", "6 CLK",
"7 CLK", "8 CLK",
"9 CLK", "10 CLK",
"11 CLK", "12 CLK",
"Reserved", "Reserved",
"Reserved", "Reserved"
};
/* Generic add master or slave info function */
static char* get_drives_info (char *buffer, byte pos)
{
byte reg00, reg01, reg10, reg11; /* timing registers */
char* p = buffer;
/* Postwrite/Prefetch */
pci_read_config_byte(bmide_dev, 0x4b, &reg00);
p += sprintf(p, "Drive %d: Postwrite %s \t \t Postwrite %s\n",
pos, (reg00 & (0x10 << pos)) ? "Enabled" : "Disabled",
(reg00 & (0x40 << pos)) ? "Enabled" : "Disabled");
p += sprintf(p, " Prefetch %s \t \t Prefetch %s\n",
(reg00 & (0x01 << pos)) ? "Enabled" : "Disabled",
(reg00 & (0x04 << pos)) ? "Enabled" : "Disabled");
pci_read_config_byte(bmide_dev, 0x40+2*pos, &reg00);
pci_read_config_byte(bmide_dev, 0x41+2*pos, &reg01);
pci_read_config_byte(bmide_dev, 0x44+2*pos, &reg10);
pci_read_config_byte(bmide_dev, 0x45+2*pos, &reg11);
/* UDMA */
if (dma_capability >= ATA_33) {
p += sprintf(p, " UDMA %s \t \t \t UDMA %s\n",
(reg01 & 0x80) ? "Enabled" : "Disabled",
(reg11 & 0x80) ? "Enabled" : "Disabled");
p += sprintf(p, " UDMA Cycle Time ");
switch(dma_capability) {
case ATA_33: p += sprintf(p, cycle_time[(reg01 & 0x60) >> 5]); break;
case ATA_66:
case ATA_100a: p += sprintf(p, cycle_time[(reg01 & 0x70) >> 4]); break;
case ATA_100: p += sprintf(p, cycle_time[reg01 & 0x0F]); break;
case ATA_133:
default: p += sprintf(p, "133+ ?"); break;
}
p += sprintf(p, " \t UDMA Cycle Time ");
switch(dma_capability) {
case ATA_33: p += sprintf(p, cycle_time[(reg11 & 0x60) >> 5]); break;
case ATA_66:
case ATA_100a: p += sprintf(p, cycle_time[(reg11 & 0x70) >> 4]); break;
case ATA_100: p += sprintf(p, cycle_time[reg11 & 0x0F]); break;
case ATA_133:
default: p += sprintf(p, "133+ ?"); break;
}
p += sprintf(p, "\n");
}
/* Data Active */
p += sprintf(p, " Data Active Time ");
switch(dma_capability) {
case ATA_00:
case ATA_16: /* confirmed */
case ATA_33:
case ATA_66:
case ATA_100a: p += sprintf(p, active_time[reg01 & 0x07]); break;
case ATA_100: p += sprintf(p, active_time[(reg00 & 0x70) >> 4]); break;
case ATA_133:
default: p += sprintf(p, "133+ ?"); break;
}
p += sprintf(p, " \t Data Active Time ");
switch(dma_capability) {
case ATA_00:
case ATA_16:
case ATA_33:
case ATA_66:
case ATA_100a: p += sprintf(p, active_time[reg11 & 0x07]); break;
case ATA_100: p += sprintf(p, active_time[(reg10 & 0x70) >> 4]); break;
case ATA_133:
default: p += sprintf(p, "133+ ?"); break;
}
p += sprintf(p, "\n");
/* Data Recovery */
/* warning: may need (reg&0x07) for pre ATA66 chips */
p += sprintf(p, " Data Recovery Time %s \t Data Recovery Time %s\n",
recovery_time[reg00 & 0x0f], recovery_time[reg10 & 0x0f]);
return p;
}
static char* get_masters_info(char* buffer)
{
return get_drives_info(buffer, 0);
}
static char* get_slaves_info(char* buffer)
{
return get_drives_info(buffer, 1);
}
/* Main get_info, called on /proc/ide/sis reads */
static int sis_get_info (char *buffer, char **addr, off_t offset, int count)
{
int rc;
char *p = buffer;
byte reg,reg1;
byte reg;
u16 reg2, reg3;
p += sprintf(p, "\nSiS 5513 ");
switch(dma_capability) {
case ATA_00: p += sprintf(p, "Unknown???"); break;
case ATA_16: p += sprintf(p, "DMA 16"); break;
case ATA_33: p += sprintf(p, "Ultra 33"); break;
case ATA_66: p += sprintf(p, "Ultra 66"); break;
case ATA_100a:
case ATA_100: p += sprintf(p, "Ultra 100"); break;
case ATA_133:
default: p+= sprintf(p, "Ultra 133+"); break;
}
p += sprintf(p, " chipset\n");
p += sprintf(p, "--------------- Primary Channel ---------------- Secondary Channel -------------\n");
rc = pci_read_config_byte(bmide_dev, 0x4a, &reg);
p += sprintf(p, "Channel Status: %s \t \t \t \t %s \n",
(reg & 0x02) ? "On" : "Off",
(reg & 0x04) ? "On" : "Off");
rc = pci_read_config_byte(bmide_dev, 0x09, &reg);
/* Status */
pci_read_config_byte(bmide_dev, 0x4a, &reg);
p += sprintf(p, "Channel Status: ");
if (dma_capability < ATA_66) {
p += sprintf(p, "%s \t \t \t \t %s\n",
(reg & 0x04) ? "On" : "Off",
(reg & 0x02) ? "On" : "Off");
} else {
p += sprintf(p, "%s \t \t \t \t %s \n",
(reg & 0x02) ? "On" : "Off",
(reg & 0x04) ? "On" : "Off");
}
/* Operation Mode */
pci_read_config_byte(bmide_dev, 0x09, &reg);
p += sprintf(p, "Operation Mode: %s \t \t \t %s \n",
(reg & 0x01) ? "Native" : "Compatible",
(reg & 0x04) ? "Native" : "Compatible");
rc = pci_read_config_byte(bmide_dev, 0x48, &reg);
p += sprintf(p, "Cable Type: %s \t \t \t %s\n",
(reg & 0x10) ? cable_type[1] : cable_type[0],
(reg & 0x20) ? cable_type[1] : cable_type[0]);
rc = pci_read_config_word(bmide_dev, 0x4c, &reg2);
rc = pci_read_config_word(bmide_dev, 0x4e, &reg3);
/* 80-pin cable ? */
if (dma_capability > ATA_33) {
pci_read_config_byte(bmide_dev, 0x48, &reg);
p += sprintf(p, "Cable Type: %s \t \t \t %s\n",
(reg & 0x10) ? cable_type[1] : cable_type[0],
(reg & 0x20) ? cable_type[1] : cable_type[0]);
}
/* Prefetch Count */
pci_read_config_word(bmide_dev, 0x4c, &reg2);
pci_read_config_word(bmide_dev, 0x4e, &reg3);
p += sprintf(p, "Prefetch Count: %d \t \t \t \t %d\n",
reg2, reg3);
rc = pci_read_config_byte(bmide_dev, 0x4b, &reg);
p += sprintf(p, "Drive 0: Postwrite %s \t \t Postwrite %s\n",
(reg & 0x10) ? "Enabled" : "Disabled",
(reg & 0x40) ? "Enabled" : "Disabled");
p += sprintf(p, " Prefetch %s \t \t Prefetch %s\n",
(reg & 0x01) ? "Enabled" : "Disabled",
(reg & 0x04) ? "Enabled" : "Disabled");
rc = pci_read_config_byte(bmide_dev, 0x41, &reg);
rc = pci_read_config_byte(bmide_dev, 0x45, &reg1);
p += sprintf(p, " UDMA %s \t \t \t UDMA %s\n",
(reg & 0x80) ? "Enabled" : "Disabled",
(reg1 & 0x80) ? "Enabled" : "Disabled");
p += sprintf(p, " UDMA Cycle Time %s \t UDMA Cycle Time %s\n",
cycle_time[(reg & 0x70) >> 4], cycle_time[(reg1 & 0x70) >> 4]);
p += sprintf(p, " Data Active Time %s \t Data Active Time %s\n",
active_time[(reg & 0x07)], active_time[(reg1 &0x07)] );
rc = pci_read_config_byte(bmide_dev, 0x40, &reg);
rc = pci_read_config_byte(bmide_dev, 0x44, &reg1);
p += sprintf(p, " Data Recovery Time %s \t Data Recovery Time %s\n",
recovery_time[(reg & 0x0f)], recovery_time[(reg1 & 0x0f)]);
p = get_masters_info(p);
p = get_slaves_info(p);
rc = pci_read_config_byte(bmide_dev, 0x4b, &reg);
p += sprintf(p, "Drive 1: Postwrite %s \t \t Postwrite %s\n",
(reg & 0x20) ? "Enabled" : "Disabled",
(reg & 0x80) ? "Enabled" : "Disabled");
p += sprintf(p, " Prefetch %s \t \t Prefetch %s\n",
(reg & 0x02) ? "Enabled" : "Disabled",
(reg & 0x08) ? "Enabled" : "Disabled");
rc = pci_read_config_byte(bmide_dev, 0x43, &reg);
rc = pci_read_config_byte(bmide_dev, 0x47, &reg1);
p += sprintf(p, " UDMA %s \t \t \t UDMA %s\n",
(reg & 0x80) ? "Enabled" : "Disabled",
(reg1 & 0x80) ? "Enabled" : "Disabled");
p += sprintf(p, " UDMA Cycle Time %s \t UDMA Cycle Time %s\n",
cycle_time[(reg & 0x70) >> 4], cycle_time[(reg1 & 0x70) >> 4]);
p += sprintf(p, " Data Active Time %s \t Data Active Time %s\n",
active_time[(reg & 0x07)], active_time[(reg1 &0x07)] );
rc = pci_read_config_byte(bmide_dev, 0x42, &reg);
rc = pci_read_config_byte(bmide_dev, 0x46, &reg1);
p += sprintf(p, " Data Recovery Time %s \t Data Recovery Time %s\n",
recovery_time[(reg & 0x0f)], recovery_time[(reg1 & 0x0f)]);
return p-buffer;
}
#endif /* defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) */
byte sis_proc = 0;
extern char *ide_xfer_verbose (byte xfer_rate);
/*
* Configuration functions
*/
/* Enables per-drive prefetch and postwrite */
static void config_drive_art_rwp (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
......@@ -237,14 +440,24 @@ static void config_drive_art_rwp (ide_drive_t *drive)
byte reg4bh = 0;
byte rw_prefetch = (0x11 << drive->dn);
pci_read_config_byte(dev, 0x4b, &reg4bh);
#ifdef DEBUG
printk("SIS5513: config_drive_art_rwp, drive %d\n", drive->dn);
sis5513_load_verify_registers(dev, "config_drive_art_rwp start");
#endif
if (drive->type != ATA_DISK)
return;
pci_read_config_byte(dev, 0x4b, &reg4bh);
if ((reg4bh & rw_prefetch) != rw_prefetch)
pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
#ifdef DEBUG
sis5513_load_verify_registers(dev, "config_drive_art_rwp end");
#endif
}
/* Set per-drive active and recovery time */
static void config_art_rwp_pio (ide_drive_t *drive, byte pio)
{
ide_hwif_t *hwif = HWIF(drive);
......@@ -255,6 +468,10 @@ static void config_art_rwp_pio (ide_drive_t *drive, byte pio)
unsigned short eide_pio_timing[6] = {600, 390, 240, 180, 120, 90};
unsigned short xfer_pio = drive->id->eide_pio_modes;
#ifdef DEBUG
sis5513_load_verify_registers(dev, "config_drive_art_rwp_pio start");
#endif
config_drive_art_rwp(drive);
pio = ide_get_best_pio_mode(drive, 255, pio, NULL);
......@@ -263,8 +480,8 @@ static void config_art_rwp_pio (ide_drive_t *drive, byte pio)
if (drive->id->eide_pio_iordy > 0) {
for (xfer_pio = 5;
xfer_pio>0 &&
drive->id->eide_pio_iordy>eide_pio_timing[xfer_pio];
(xfer_pio > 0) &&
(drive->id->eide_pio_iordy > eide_pio_timing[xfer_pio]);
xfer_pio--);
} else {
xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 :
......@@ -274,14 +491,10 @@ static void config_art_rwp_pio (ide_drive_t *drive, byte pio)
timing = (xfer_pio >= pio) ? xfer_pio : pio;
/*
* Mode 0 Mode 1 Mode 2 Mode 3 Mode 4
* Active time 8T (240ns) 6T (180ns) 4T (120ns) 3T (90ns) 3T (90ns)
* 0x41 2:0 bits 000 110 100 011 011
* Recovery time 12T (360ns) 7T (210ns) 4T (120ns) 3T (90ns) 1T (30ns)
* 0x40 3:0 bits 0000 0111 0100 0011 0001
* Cycle time 20T (600ns) 13T (390ns) 8T (240ns) 6T (180ns) 4T (120ns)
*/
#ifdef DEBUG
printk("SIS5513: config_drive_art_rwp_pio, drive %d, pio %d, timing %d\n",
drive->dn, pio, timing);
#endif
switch(drive->dn) {
case 0: drive_pci = 0x40; break;
......@@ -291,31 +504,43 @@ static void config_art_rwp_pio (ide_drive_t *drive, byte pio)
default: return;
}
pci_read_config_byte(dev, drive_pci, &test1);
pci_read_config_byte(dev, drive_pci|0x01, &test2);
/*
* Do a blanket clear of active and recovery timings.
*/
test1 &= ~0x07;
test2 &= ~0x0F;
switch(timing) {
case 4: test1 |= 0x01; test2 |= 0x03; break;
case 3: test1 |= 0x03; test2 |= 0x03; break;
case 2: test1 |= 0x04; test2 |= 0x04; break;
case 1: test1 |= 0x07; test2 |= 0x06; break;
default: break;
/* register layout changed with newer ATA100 chips */
if (dma_capability < ATA_100) {
pci_read_config_byte(dev, drive_pci, &test1);
pci_read_config_byte(dev, drive_pci+1, &test2);
/* Clear active and recovery timings */
test1 &= ~0x0F;
test2 &= ~0x07;
switch(timing) {
case 4: test1 |= 0x01; test2 |= 0x03; break;
case 3: test1 |= 0x03; test2 |= 0x03; break;
case 2: test1 |= 0x04; test2 |= 0x04; break;
case 1: test1 |= 0x07; test2 |= 0x06; break;
default: break;
}
pci_write_config_byte(dev, drive_pci, test1);
pci_write_config_byte(dev, drive_pci+1, test2);
} else {
switch(timing) { /* active recovery
v v */
case 4: test1 = 0x30|0x01; break;
case 3: test1 = 0x30|0x03; break;
case 2: test1 = 0x40|0x04; break;
case 1: test1 = 0x60|0x07; break;
default: break;
}
pci_write_config_byte(dev, drive_pci, test1);
}
pci_write_config_byte(dev, drive_pci, test1);
pci_write_config_byte(dev, drive_pci|0x01, test2);
#ifdef DEBUG
sis5513_load_verify_registers(dev, "config_drive_art_rwp_pio start");
#endif
}
static int config_chipset_for_pio (ide_drive_t *drive, byte pio)
{
int err;
byte speed;
switch(pio) {
......@@ -328,8 +553,7 @@ static int config_chipset_for_pio (ide_drive_t *drive, byte pio)
config_art_rwp_pio(drive, pio);
drive->current_speed = speed;
err = ide_config_drive_speed(drive, speed);
return err;
return ide_config_drive_speed(drive, speed);
}
static int sis5513_tune_chipset (ide_drive_t *drive, byte speed)
......@@ -337,82 +561,73 @@ static int sis5513_tune_chipset (ide_drive_t *drive, byte speed)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
byte drive_pci, test1, test2;
byte unmask, four_two, mask = 0;
if (host_dev) {
switch(host_dev->device) {
case PCI_DEVICE_ID_SI_530:
case PCI_DEVICE_ID_SI_540:
case PCI_DEVICE_ID_SI_620:
case PCI_DEVICE_ID_SI_630:
case PCI_DEVICE_ID_SI_635:
case PCI_DEVICE_ID_SI_640:
case PCI_DEVICE_ID_SI_645:
case PCI_DEVICE_ID_SI_650:
case PCI_DEVICE_ID_SI_730:
case PCI_DEVICE_ID_SI_735:
case PCI_DEVICE_ID_SI_740:
case PCI_DEVICE_ID_SI_745:
case PCI_DEVICE_ID_SI_750:
unmask = 0xF0;
four_two = 0x01;
break;
default:
unmask = 0xE0;
four_two = 0x00;
break;
}
} else {
unmask = 0xE0;
four_two = 0x00;
}
byte drive_pci, reg;
#ifdef DEBUG
sis5513_load_verify_registers(dev, "sis5513_tune_chipset start");
printk("SIS5513: sis5513_tune_chipset, drive %d, speed %d\n",
drive->dn, speed);
#endif
switch(drive->dn) {
case 0: drive_pci = 0x40;break;
case 1: drive_pci = 0x42;break;
case 2: drive_pci = 0x44;break;
case 3: drive_pci = 0x46;break;
case 0: drive_pci = 0x40; break;
case 1: drive_pci = 0x42; break;
case 2: drive_pci = 0x44; break;
case 3: drive_pci = 0x46; break;
default: return ide_dma_off;
}
pci_read_config_byte(dev, drive_pci, &test1);
pci_read_config_byte(dev, drive_pci|0x01, &test2);
#ifdef BROKEN_LEVEL
#ifdef DEBUG
printk("SIS5513: BROKEN_LEVEL activated, speed=%d -> speed=%d\n", speed, BROKEN_LEVEL);
#endif
if (speed > BROKEN_LEVEL) speed = BROKEN_LEVEL;
#endif
if ((speed <= XFER_MW_DMA_2) && (test2 & 0x80)) {
pci_write_config_byte(dev, drive_pci|0x01, test2 & ~0x80);
pci_read_config_byte(dev, drive_pci|0x01, &test2);
} else {
pci_write_config_byte(dev, drive_pci|0x01, test2 & ~unmask);
pci_read_config_byte(dev, drive_pci+1, &reg);
/* Disable UDMA bit for non UDMA modes on UDMA chips */
if ((speed < XFER_UDMA_0) && (dma_capability > ATA_16)) {
reg &= 0x7F;
pci_write_config_byte(dev, drive_pci+1, reg);
}
/* Config chip for mode */
switch(speed) {
#ifdef CONFIG_BLK_DEV_IDEDMA
case XFER_UDMA_5: mask = 0x80; break;
case XFER_UDMA_4: mask = 0x90; break;
case XFER_UDMA_3: mask = 0xA0; break;
case XFER_UDMA_2: mask = (four_two) ? 0xB0 : 0xA0; break;
case XFER_UDMA_1: mask = (four_two) ? 0xD0 : 0xC0; break;
case XFER_UDMA_0: mask = unmask; break;
case XFER_UDMA_5:
case XFER_UDMA_4:
case XFER_UDMA_3:
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
/* Force the UDMA bit on if we want to use UDMA */
reg |= 0x80;
/* clean reg cycle time bits */
reg &= ~((0xFF >> (8 - cycle_time_range[dma_capability]))
<< cycle_time_offset[dma_capability]);
/* set reg cycle time bits */
reg |= cycle_time_value[dma_capability-ATA_00][speed-XFER_UDMA_0]
<< cycle_time_offset[dma_capability];
pci_write_config_byte(dev, drive_pci+1, reg);
break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
case XFER_SW_DMA_2:
case XFER_SW_DMA_1:
case XFER_SW_DMA_0: break;
case XFER_SW_DMA_0:
break;
#endif /* CONFIG_BLK_DEV_IDEDMA */
case XFER_PIO_4: return((int) config_chipset_for_pio(drive, 4));
case XFER_PIO_3: return((int) config_chipset_for_pio(drive, 3));
case XFER_PIO_2: return((int) config_chipset_for_pio(drive, 2));
case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1));
case XFER_PIO_0:
default: return((int) config_chipset_for_pio(drive, 0));
default: return((int) config_chipset_for_pio(drive, 0));
}
if (speed > XFER_MW_DMA_2)
pci_write_config_byte(dev, drive_pci|0x01, test2|mask);
drive->current_speed = speed;
#ifdef DEBUG
sis5513_load_verify_registers(dev, "sis5513_tune_chipset end");
#endif
return ((int) ide_config_drive_speed(drive, speed));
}
......@@ -430,47 +645,27 @@ static int config_chipset_for_dma (ide_drive_t *drive, byte ultra)
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = HWIF(drive);
byte four_two = 0, speed = 0;
int err;
byte speed = 0;
byte unit = (drive->select.b.unit & 0x01);
byte udma_66 = eighty_ninty_three(drive);
byte ultra_100 = 0;
if (host_dev) {
switch(host_dev->device) {
case PCI_DEVICE_ID_SI_635:
case PCI_DEVICE_ID_SI_640:
case PCI_DEVICE_ID_SI_645:
case PCI_DEVICE_ID_SI_650:
case PCI_DEVICE_ID_SI_730:
case PCI_DEVICE_ID_SI_735:
case PCI_DEVICE_ID_SI_740:
case PCI_DEVICE_ID_SI_745:
case PCI_DEVICE_ID_SI_750:
ultra_100 = 1;
case PCI_DEVICE_ID_SI_530:
case PCI_DEVICE_ID_SI_540:
case PCI_DEVICE_ID_SI_620:
case PCI_DEVICE_ID_SI_630:
four_two = 0x01;
break;
default:
four_two = 0x00; break;
}
}
#ifdef DEBUG
printk("SIS5513: config_chipset_for_dma, drive %d, ultra %d\n",
drive->dn, ultra);
#endif
if ((id->dma_ultra & 0x0020) && (ultra) && (udma_66) && (four_two) && (ultra_100))
if ((id->dma_ultra & 0x0020) && ultra && udma_66 && (dma_capability >= ATA_100a))
speed = XFER_UDMA_5;
else if ((id->dma_ultra & 0x0010) && (ultra) && (udma_66) && (four_two))
else if ((id->dma_ultra & 0x0010) && ultra && udma_66 && (dma_capability >= ATA_66))
speed = XFER_UDMA_4;
else if ((id->dma_ultra & 0x0008) && (ultra) && (udma_66) && (four_two))
else if ((id->dma_ultra & 0x0008) && ultra && udma_66 && (dma_capability >= ATA_66))
speed = XFER_UDMA_3;
else if ((id->dma_ultra & 0x0004) && (ultra))
else if ((id->dma_ultra & 0x0004) && ultra && (dma_capability >= ATA_33))
speed = XFER_UDMA_2;
else if ((id->dma_ultra & 0x0002) && (ultra))
else if ((id->dma_ultra & 0x0002) && ultra && (dma_capability >= ATA_33))
speed = XFER_UDMA_1;
else if ((id->dma_ultra & 0x0001) && (ultra))
else if ((id->dma_ultra & 0x0001) && ultra && (dma_capability >= ATA_33))
speed = XFER_UDMA_0;
else if (id->dma_mword & 0x0004)
speed = XFER_MW_DMA_2;
......@@ -489,11 +684,7 @@ static int config_chipset_for_dma (ide_drive_t *drive, byte ultra)
outb(inb(hwif->dma_base+2)|(1<<(5+unit)), hwif->dma_base+2);
err = sis5513_tune_chipset(drive, speed);
#if SIS5513_DEBUG_DRIVE_INFO
printk("%s: %s drive%d\n", drive->name, ide_xfer_verbose(speed), drive->dn);
#endif /* SIS5513_DEBUG_DRIVE_INFO */
sis5513_tune_chipset(drive, speed);
return ((int) ((id->dma_ultra >> 11) & 7) ? ide_dma_on :
((id->dma_ultra >> 8) & 7) ? ide_dma_on :
......@@ -550,9 +741,7 @@ static int config_drive_xfer_rate (ide_drive_t *drive)
return HWIF(drive)->dmaproc(dma_func, drive);
}
/*
* sis5513_dmaproc() initiates/aborts (U)DMA read/write operations on a drive.
*/
/* initiates/aborts (U)DMA read/write operations on a drive. */
int sis5513_dmaproc (ide_dma_action_t func, ide_drive_t *drive)
{
switch (func) {
......@@ -567,15 +756,18 @@ int sis5513_dmaproc (ide_dma_action_t func, ide_drive_t *drive)
}
#endif /* CONFIG_BLK_DEV_IDEDMA */
/* Chip detection and general config */
unsigned int __init pci_init_sis5513(struct pci_dev *dev)
{
struct pci_dev *host;
int i = 0;
byte latency = 0;
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &latency);
#ifdef DEBUG
sis5513_print_registers(dev, "pci_init_sis5513 start");
#endif
for (i = 0; i < ARRAY_SIZE (SiSHostChipInfo) && !host_dev; i++) {
/* Find the chip */
for (i = 0; i < ARRAY_SIZE(SiSHostChipInfo) && !host_dev; i++) {
host = pci_find_device (PCI_VENDOR_ID_SI,
SiSHostChipInfo[i].host_id,
NULL);
......@@ -583,30 +775,67 @@ unsigned int __init pci_init_sis5513(struct pci_dev *dev)
continue;
host_dev = host;
dma_capability = SiSHostChipInfo[i].dma_capability;
printk(SiSHostChipInfo[i].name);
printk("\n");
if (SiSHostChipInfo[i].flags & SIS5513_FLAG_LATENCY) {
if (latency != 0x10)
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10);
if (SiSHostChipInfo[i].flags & SIS5513_LATENCY) {
byte latency = (dma_capability == ATA_100)? 0x80 : 0x10; /* Lacking specs */
pci_write_config_byte(dev, PCI_LATENCY_TIMER, latency);
}
}
/* Make general config ops here
1/ tell IDE channels to operate in Compabitility mode only
2/ tell old chips to allow per drive IDE timings */
if (host_dev) {
byte reg52h = 0;
pci_read_config_byte(dev, 0x52, &reg52h);
if (!(reg52h & 0x04)) {
/* set IDE controller to operate in Compabitility mode only */
pci_write_config_byte(dev, 0x52, reg52h|0x04);
byte reg;
switch(dma_capability) {
case ATA_133:
case ATA_100:
/* Set compatibility bit */
pci_read_config_byte(dev, 0x49, &reg);
if (!(reg & 0x01)) {
pci_write_config_byte(dev, 0x49, reg|0x01);
}
break;
case ATA_100a:
case ATA_66:
/* On ATA_66 chips the bit was elsewhere */
pci_read_config_byte(dev, 0x52, &reg);
if (!(reg & 0x04)) {
pci_write_config_byte(dev, 0x52, reg|0x04);
}
break;
case ATA_33:
/* On ATA_33 we didn't have a single bit to set */
pci_read_config_byte(dev, 0x09, &reg);
if ((reg & 0x0f) != 0x00) {
pci_write_config_byte(dev, 0x09, reg&0xf0);
}
case ATA_16:
/* force per drive recovery and active timings
needed on ATA_33 and below chips */
pci_read_config_byte(dev, 0x52, &reg);
if (!(reg & 0x08)) {
pci_write_config_byte(dev, 0x52, reg|0x08);
}
break;
case ATA_00:
default: break;
}
#if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS)
if (!sis_proc) {
sis_proc = 1;
bmide_dev = dev;
sis_display_info = &sis_get_info;
}
#endif /* defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) */
#endif
}
#ifdef DEBUG
sis5513_load_verify_registers(dev, "pci_init_sis5513 end");
#endif
return 0;
}
......@@ -616,27 +845,10 @@ unsigned int __init ata66_sis5513 (ide_hwif_t *hwif)
byte mask = hwif->channel ? 0x20 : 0x10;
pci_read_config_byte(hwif->pci_dev, 0x48, &reg48h);
if (host_dev) {
switch(host_dev->device) {
case PCI_DEVICE_ID_SI_530:
case PCI_DEVICE_ID_SI_540:
case PCI_DEVICE_ID_SI_620:
case PCI_DEVICE_ID_SI_630:
case PCI_DEVICE_ID_SI_635:
case PCI_DEVICE_ID_SI_640:
case PCI_DEVICE_ID_SI_645:
case PCI_DEVICE_ID_SI_650:
case PCI_DEVICE_ID_SI_730:
case PCI_DEVICE_ID_SI_735:
case PCI_DEVICE_ID_SI_740:
case PCI_DEVICE_ID_SI_745:
case PCI_DEVICE_ID_SI_750:
ata66 = (reg48h & mask) ? 0 : 1;
default:
break;
}
if (dma_capability >= ATA_66) {
ata66 = (reg48h & mask) ? 0 : 1;
}
return (ata66);
return ata66;
}
void __init ide_init_sis5513 (ide_hwif_t *hwif)
......@@ -651,34 +863,17 @@ void __init ide_init_sis5513 (ide_hwif_t *hwif)
return;
if (host_dev) {
switch(host_dev->device) {
#ifdef CONFIG_BLK_DEV_IDEDMA
case PCI_DEVICE_ID_SI_530:
case PCI_DEVICE_ID_SI_540:
case PCI_DEVICE_ID_SI_620:
case PCI_DEVICE_ID_SI_630:
case PCI_DEVICE_ID_SI_635:
case PCI_DEVICE_ID_SI_640:
case PCI_DEVICE_ID_SI_645:
case PCI_DEVICE_ID_SI_650:
case PCI_DEVICE_ID_SI_730:
case PCI_DEVICE_ID_SI_735:
case PCI_DEVICE_ID_SI_740:
case PCI_DEVICE_ID_SI_745:
case PCI_DEVICE_ID_SI_750:
case PCI_DEVICE_ID_SI_5600:
case PCI_DEVICE_ID_SI_5597:
case PCI_DEVICE_ID_SI_5591:
if (!noautodma)
hwif->autodma = 1;
hwif->highmem = 1;
hwif->dmaproc = &sis5513_dmaproc;
break;
#endif /* CONFIG_BLK_DEV_IDEDMA */
default:
hwif->autodma = 0;
break;
if (dma_capability > ATA_16) {
hwif->autodma = noautodma ? 0 : 1;
hwif->highmem = 1;
hwif->dmaproc = &sis5513_dmaproc;
} else {
#endif
hwif->autodma = 0;
#ifdef CONFIG_BLK_DEV_IDEDMA
}
#endif
}
return;
}
......@@ -368,9 +368,7 @@ struct hd_big_geometry {
#define HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */
#define HDIO_SET_DMA 0x0326 /* change use-dma flag */
#define HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */
#define HDIO_SCAN_HWIF 0x0328 /* register and (re)scan interface */
#define HDIO_SET_NICE 0x0329 /* set nice flags */
#define HDIO_UNREGISTER_HWIF 0x032a /* unregister interface */
#define HDIO_SET_WCACHE 0x032b /* change write cache enable-disable */
#define HDIO_SET_ACOUSTIC 0x032c /* change acoustic behavior */
#define HDIO_SET_BUSSTATE 0x032d /* set the bus state of the hwif */
......@@ -645,17 +643,4 @@ struct hd_driveid {
#define IDE_NICE_1 (3) /* when probably won't affect us much */
#define IDE_NICE_2 (4) /* when we know it's on our expense */
#ifdef __KERNEL__
/*
* These routines are used for kernel command line parameters from main.c:
*/
#include <linux/config.h>
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
int ide_register(int io_port, int ctl_port, int irq);
void ide_unregister(unsigned int);
#endif /* CONFIG_BLK_DEV_IDE || CONFIG_BLK_DEV_IDE_MODULE */
#endif /* __KERNEL__ */
#endif /* _LINUX_HDREG_H */
......@@ -242,8 +242,7 @@ typedef struct hw_regs_s {
/*
* Register new hardware with ide
*/
int ide_register_hw(hw_regs_t *hw, struct hwif_s **hwifp);
extern int ide_register_hw(hw_regs_t *hw, struct hwif_s **hwifp);
/*
* Set up hw_regs_t structure before calling ide_register_hw (optional)
*/
......@@ -506,6 +505,8 @@ typedef struct hwif_s {
struct device device; /* global device tree handle */
} ide_hwif_t;
extern void ide_unregister(ide_hwif_t *hwif);
/*
* Status returned from various ide_ functions
*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment