i2c: busses: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1].

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughAcked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

drivers/i2c/busses/i2c-amd8111.c

@@ -381,7 +381,7 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr,
 			if (status)
 				return status;
 			len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
-			/* fall through */
+			fallthrough;
 		case I2C_SMBUS_I2C_BLOCK_DATA:
 			for (i = 0; i < len; i++) {
 				status = amd_ec_read(smbus, AMD_SMB_DATA + i,

drivers/i2c/busses/i2c-aspeed.c

@@ -504,7 +504,7 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 			goto error_and_stop;
 		}
 		irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
-		/* fall through */
+		fallthrough;
 	case ASPEED_I2C_MASTER_TX_FIRST:
 		if (bus->buf_index < msg->len) {
 			bus->master_state = ASPEED_I2C_MASTER_TX;
@@ -520,7 +520,7 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 		/* RX may not have completed yet (only address cycle) */
 		if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE))
 			goto out_no_complete;
-		/* fall through */
+		fallthrough;
 	case ASPEED_I2C_MASTER_RX:
 		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
 			dev_err(bus->dev, "master failed to RX\n");

drivers/i2c/busses/i2c-designware-pcidrv.c

@@ -90,7 +90,7 @@ static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 	switch (pdev->device) {
 	case 0x0817:
 		dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
-		/* fall through */
+		fallthrough;
 	case 0x0818:
 	case 0x0819:
 		c->bus_num = pdev->device - 0x817 + 3;

drivers/i2c/busses/i2c-digicolor.c

@@ -187,7 +187,7 @@ static irqreturn_t dc_i2c_irq(int irq, void *dev_id)
 			break;
 		}
 		i2c->state = STATE_WRITE;
-		/* fall through */
+		fallthrough;
 	case STATE_WRITE:
 		if (i2c->msgbuf_ptr < i2c->msg->len)
 			dc_i2c_write_buf(i2c);

drivers/i2c/busses/i2c-i801.c

@@ -1765,19 +1765,19 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1:
 	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2:
 		priv->features |= FEATURE_IDF;
-		/* fall through */
+		fallthrough;
 	default:
 		priv->features |= FEATURE_BLOCK_PROC;
 		priv->features |= FEATURE_I2C_BLOCK_READ;
 		priv->features |= FEATURE_IRQ;
-		/* fall through */
+		fallthrough;
 	case PCI_DEVICE_ID_INTEL_82801DB_3:
 		priv->features |= FEATURE_SMBUS_PEC;
 		priv->features |= FEATURE_BLOCK_BUFFER;
-		/* fall through */
+		fallthrough;
 	case PCI_DEVICE_ID_INTEL_82801CA_3:
 		priv->features |= FEATURE_HOST_NOTIFY;
-		/* fall through */
+		fallthrough;
 	case PCI_DEVICE_ID_INTEL_82801BA_2:
 	case PCI_DEVICE_ID_INTEL_82801AB_3:
 	case PCI_DEVICE_ID_INTEL_82801AA_3:

drivers/i2c/busses/i2c-mv64xxx.c

@@ -251,7 +251,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
 				MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
 			break;
 		}
-		/* FALLTHRU */
+		fallthrough;
 	case MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */
 	case MV64XXX_I2C_STATUS_MAST_WR_ACK: /* 0x28 */
 		if ((drv_data->bytes_left == 0)
@@ -282,14 +282,14 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
 				MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
 			break;
 		}
-		/* FALLTHRU */
+		fallthrough;
 	case MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */
 		if (drv_data->bytes_left == 0) {
 			drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
 			drv_data->state = MV64XXX_I2C_STATE_IDLE;
 			break;
 		}
-		/* FALLTHRU */
+		fallthrough;
 	case MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */
 		if (status != MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK)
 			drv_data->action = MV64XXX_I2C_ACTION_CONTINUE;
@@ -417,8 +417,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 			"mv64xxx_i2c_do_action: Invalid action: %d\n",
 			drv_data->action);
 		drv_data->rc = -EIO;
-
-		/* FALLTHRU */
+		fallthrough;
 	case MV64XXX_I2C_ACTION_SEND_STOP:
 		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
 		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,

drivers/i2c/busses/i2c-synquacer.c

@@ -398,8 +398,7 @@ static irqreturn_t synquacer_i2c_isr(int irq, void *dev_id)
 
 		if (i2c->state == STATE_READ)
 			goto prepare_read;
-
-		/* fall through */
+		fallthrough;
 
 	case STATE_WRITE:
 		if (bsr & SYNQUACER_I2C_BSR_LRB) {

drivers/i2c/busses/i2c-viapro.c

@@ -228,7 +228,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
 			goto exit_unsupported;
 		if (read_write == I2C_SMBUS_READ)
 			outb_p(data->block[0], SMBHSTDAT0);
-		/* Fall through */
+		fallthrough;
 	case I2C_SMBUS_BLOCK_DATA:
 		outb_p(command, SMBHSTCMD);
 		if (read_write == I2C_SMBUS_WRITE) {

drivers/i2c/busses/scx200_acb.c

@@ -151,7 +151,7 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
 
 	case state_repeat_start:
 		outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1);
-		/* fallthrough */
+		fallthrough;
 
 	case state_quick:
 		if (iface->address_byte & 1) {

drivers/i2c/i2c-slave-eeprom.c

@@ -66,7 +66,7 @@ static int i2c_slave_eeprom_slave_cb(struct i2c_client *client,
 	case I2C_SLAVE_READ_PROCESSED:
 		/* The previous byte made it to the bus, get next one */
 		eeprom->buffer_idx++;
-		/* fallthrough */
+		fallthrough;
 	case I2C_SLAVE_READ_REQUESTED:
 		spin_lock(&eeprom->buffer_lock);
 		*val = eeprom->buffer[eeprom->buffer_idx & eeprom->address_mask];