Skip to content

L
linux
Commit 4f54c38b authored by David Mosberger's avatar David Mosberger
Browse files
Options

acpi.c: 

  Paul's ACPI update.
parent e19ca5df
Show whitespace changes
Inline Side-by-side
Showing with 414 additions and 499 deletions
arch/ia64/kernel/acpi.c
View file @ 4f54c38b
/*
* Advanced Configuration and Power Interface
*
* Based on 'ACPI Specification 1.0b' February 2, 1999 and
* 'IA-64 Extensions to ACPI Specification' Revision 0.6
* acpi.c - Architecture-Specific Low-Level ACPI Support
*
* Copyright (C) 1999 VA Linux Systems
* Copyright (C) 1999,2000 Walt Drummond <drummond@valinux.com>
......@@ -10,12 +7,28 @@
* Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
* Copyright (C) 2000 Intel Corp.
* Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
* ACPI based kernel configuration manager.
* ACPI 2.0 & IA64 ext 0.71
* Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
......@@ -23,29 +36,16 @@
#include <linux/string.h>
#include <linux/types.h>
#include <linux/irq.h>
#ifdef CONFIG_SERIAL_ACPI
#include <linux/acpi_serial.h>
#endif
#include <asm/acpi-ext.h>
#include <asm/acpikcfg.h>
#include <linux/acpi.h>
#include <asm/efi.h>
#include <asm/io.h>
#include <asm/iosapic.h>
#include <asm/machvec.h>
#include <asm/page.h>
#include <asm/system.h>
#undef ACPI_DEBUG /* Guess what this does? */
/* global array to record platform interrupt vectors for generic int routing */
int platform_irq_list[ACPI_MAX_PLATFORM_IRQS];
/* These are ugly but will be reclaimed by the kernel */
int __initdata available_cpus;
int __initdata total_cpus;
void (*pm_idle) (void);
void (*pm_power_off) (void);
#define PREFIX "ACPI: "
asm (".weak iosapic_register_irq");
asm (".weak iosapic_register_legacy_irq");
......@@ -53,10 +53,16 @@ asm (".weak iosapic_register_platform_irq");
asm (".weak iosapic_init");
asm (".weak iosapic_version");
void (*pm_idle) (void);
void (*pm_power_off) (void);
/*
* TBD: Should go away once we have an ACPI parser.
*/
const char *
acpi_get_sysname (void)
{
/* the following should go away once we have an ACPI parser: */
#ifdef CONFIG_IA64_GENERIC
return "hpsim";
#else
......@@ -72,16 +78,19 @@ acpi_get_sysname (void)
# error Unknown platform. Fix acpi.c.
# endif
#endif
}
#define ACPI_MAX_PLATFORM_IRQS 256
/* Array to record platform interrupt vectors for generic interrupt routing. */
int platform_irq_list[ACPI_MAX_PLATFORM_IRQS];
/*
* Interrupt routing API for device drivers.
* Provides the interrupt vector for a generic platform event
* (currently only CPEI implemented)
* Interrupt routing API for device drivers. Provides interrupt vector for
* a generic platform event. Currently only CPEI is implemented.
*/
int
acpi_request_vector(u32 int_type)
acpi_request_vector (u32 int_type)
{
int vector = -1;
......@@ -94,586 +103,492 @@ acpi_request_vector(u32 int_type)
return vector;
}
/*
* Configure legacy IRQ information.
*/
static void __init
acpi_legacy_irq (char *p)
{
acpi_entry_int_override_t *legacy = (acpi_entry_int_override_t *) p;
unsigned long polarity = 0, edge_triggered = 0;
/*
* If the platform we're running doesn't define
* iosapic_register_legacy_irq(), we ignore this info...
*/
if (!iosapic_register_legacy_irq)
return;
switch (legacy->flags) {
case 0x5: polarity = 1; edge_triggered = 1; break;
case 0x7: polarity = 0; edge_triggered = 1; break;
case 0xd: polarity = 1; edge_triggered = 0; break;
case 0xf: polarity = 0; edge_triggered = 0; break;
default:
printk(" ACPI Legacy IRQ 0x%02x: Unknown flags 0x%x\n", legacy->isa_irq,
legacy->flags);
break;
}
iosapic_register_legacy_irq(legacy->isa_irq, legacy->pin, polarity, edge_triggered);
}
/* --------------------------------------------------------------------------
Boot-time Table Parsing
-------------------------------------------------------------------------- */
/*
* ACPI 2.0 tables parsing functions
*/
static int total_cpus __initdata;
static int available_cpus __initdata;
struct acpi_table_madt * acpi_madt __initdata;
static unsigned long
readl_unaligned(void *p)
static int __init
acpi_parse_lapic_addr_ovr (acpi_table_entry_header *header)
{
unsigned long ret;
struct acpi_table_lapic_addr_ovr *lapic = NULL;
lapic = (struct acpi_table_lapic_addr_ovr *) header;
if (!lapic)
return -EINVAL;
acpi_table_print_madt_entry(header);
memcpy(&ret, p, sizeof(long));
return ret;
if (lapic->address) {
iounmap((void *) ipi_base_addr);
ipi_base_addr = (unsigned long) ioremap(lapic->address, 0);
}
return 0;
}
/*
* Identify usable CPU's and remember them for SMP bringup later.
*/
static void __init
acpi20_lsapic (char *p)
static int __init
acpi_parse_lsapic (acpi_table_entry_header *header)
{
int add = 1;
struct acpi_table_lsapic *lsapic = NULL;
acpi20_entry_lsapic_t *lsapic = (acpi20_entry_lsapic_t *) p;
printk(" CPU %.04x:%.04x: ", lsapic->eid, lsapic->id);
lsapic = (struct acpi_table_lsapic *) header;
if (!lsapic)
return -EINVAL;
if ((lsapic->flags & LSAPIC_ENABLED) == 0) {
printk("disabled.\n");
add = 0;
}
acpi_table_print_madt_entry(header);
#ifdef CONFIG_SMP
smp_boot_data.cpu_phys_id[total_cpus] = -1;
#endif
if (add) {
printk("CPU %d (0x%04x)", total_cpus, (lsapic->id << 8) | lsapic->eid);
if (lsapic->flags.enabled) {
available_cpus++;
printk("available");
printk(" enabled");
#ifdef CONFIG_SMP
smp_boot_data.cpu_phys_id[total_cpus] = (lsapic->id << 8) | lsapic->eid;
if (hard_smp_processor_id() == smp_boot_data.cpu_phys_id[total_cpus])
printk(" (BSP)");
#endif
printk(".\n");
}
else {
printk(" disabled");
#ifdef CONFIG_SMP
smp_boot_data.cpu_phys_id[total_cpus] = -1;
#endif
}
printk("\n");
total_cpus++;
return 0;
}
/*
* Extract iosapic info from madt (again) to determine which iosapic
* this platform interrupt resides in
*/
static int __init
acpi20_which_iosapic (int global_vector, acpi_madt_t *madt, u32 *irq_base, char **iosapic_address)
acpi_parse_lapic_nmi (acpi_table_entry_header *header)
{
acpi_entry_iosapic_t *iosapic;
char *p, *end;
int ver, max_pin;
struct acpi_table_lapic_nmi *lacpi_nmi = NULL;
lacpi_nmi = (struct acpi_table_lapic_nmi*) header;
if (!lacpi_nmi)
return -EINVAL;
p = (char *) (madt + 1);
end = p + (madt->header.length - sizeof(acpi_madt_t));
acpi_table_print_madt_entry(header);
/* TBD: Support lapic_nmi entries */
return 0;
}
static int __init
acpi_find_iosapic (int global_vector, u32 *irq_base, char **iosapic_address)
{
struct acpi_table_iosapic *iosapic = NULL;
int ver = 0;
int max_pin = 0;
char *p = 0;
char *end = 0;
if (!irq_base || !iosapic_address)
return -ENODEV;
p = (char *) (acpi_madt + 1);
end = p + (acpi_madt->header.length - sizeof(struct acpi_table_madt));
while (p < end) {
switch (*p) {
case ACPI20_ENTRY_IO_SAPIC:
/* collect IOSAPIC info for platform int use later */
iosapic = (acpi_entry_iosapic_t *)p;
*irq_base = iosapic->irq_base;
if (*p == ACPI_MADT_IOSAPIC) {
iosapic = (struct acpi_table_iosapic *) p;
*irq_base = iosapic->global_irq_base;
*iosapic_address = ioremap(iosapic->address, 0);
/* is this the iosapic we're looking for? */
ver = iosapic_version(*iosapic_address);
max_pin = (ver >> 16) & 0xff;
if ((global_vector - *irq_base) <= max_pin)
return 0; /* found it! */
break;
default:
break;
return 0; /* Found it! */
}
p += p[1];
}
return 1;
return -ENODEV;
}
/*
* Info on platform interrupt sources: NMI, PMI, INIT, etc.
*/
static void __init
acpi20_platform (char *p, acpi_madt_t *madt)
static int __init
acpi_parse_iosapic (acpi_table_entry_header *header)
{
int vector;
u32 irq_base;
char *iosapic_address;
unsigned long polarity = 0, trigger = 0;
acpi20_entry_platform_src_t *plat = (acpi20_entry_platform_src_t *) p;
struct acpi_table_iosapic *iosapic;
printk("PLATFORM: IOSAPIC %x -> Vector %x on CPU %.04u:%.04u\n",
plat->iosapic_vector, plat->global_vector, plat->eid, plat->id);
iosapic = (struct acpi_table_iosapic *) header;
if (!iosapic)
return -EINVAL;
/* record platform interrupt vectors for generic int routing code */
acpi_table_print_madt_entry(header);
if (!iosapic_register_platform_irq) {
printk("acpi20_platform(): no ACPI platform IRQ support\n");
return;
if (iosapic_init) {
#ifndef CONFIG_ITANIUM
/* PCAT_COMPAT flag indicates dual-8259 setup */
iosapic_init(iosapic->address, iosapic->global_irq_base,
acpi_madt->flags.pcat_compat);
#else
/* Firmware on old Itanium systems is broken */
iosapic_init(iosapic->address, iosapic->global_irq_base, 1);
#endif
}
return 0;
}
/* extract polarity and trigger info from flags */
switch (plat->flags) {
case 0x5: polarity = 1; trigger = 1; break;
case 0x7: polarity = 0; trigger = 1; break;
case 0xd: polarity = 1; trigger = 0; break;
case 0xf: polarity = 0; trigger = 0; break;
default:
printk("acpi20_platform(): unknown flags 0x%x\n", plat->flags);
break;
static int __init
acpi_parse_plat_int_src (acpi_table_entry_header *header)
{
struct acpi_table_plat_int_src *plintsrc = NULL;
int vector = 0;
u32 irq_base = 0;
char *iosapic_address = NULL;
plintsrc = (struct acpi_table_plat_int_src *) header;
if (!plintsrc)
return -EINVAL;
acpi_table_print_madt_entry(header);
if (!iosapic_register_platform_irq) {
printk(KERN_WARNING PREFIX "No ACPI platform IRQ support\n");
return -ENODEV;
}
/* which iosapic does this IRQ belong to? */
if (acpi20_which_iosapic(plat->global_vector, madt, &irq_base, &iosapic_address)) {
printk("acpi20_platform(): I/O SAPIC not found!\n");
return;
if (0 != acpi_find_iosapic(plintsrc->global_irq, &irq_base, &iosapic_address)) {
printk(KERN_WARNING PREFIX "IOSAPIC not found\n");
return -ENODEV;
}
/*
* get vector assignment for this IRQ, set attributes, and program the IOSAPIC
* routing table
* Get vector assignment for this IRQ, set attributes, and program the
* IOSAPIC routing table.
*/
vector = iosapic_register_platform_irq(plat->int_type,
plat->global_vector,
plat->iosapic_vector,
plat->eid,
plat->id,
polarity,
trigger,
vector = iosapic_register_platform_irq (plintsrc->type,
plintsrc->global_irq,
plintsrc->iosapic_vector,
plintsrc->eid,
plintsrc->id,
(plintsrc->flags.polarity == 1) ? 1 : 0,
(plintsrc->flags.trigger == 1) ? 1 : 0,
irq_base,
iosapic_address);
platform_irq_list[plat->int_type] = vector;
platform_irq_list[plintsrc->type] = vector;
return 0;
}
/*
* Override the physical address of the local APIC in the MADT stable header.
*/
static void __init
acpi20_lapic_addr_override (char *p)
static int __init
acpi_parse_int_src_ovr (acpi_table_entry_header *header)
{
acpi20_entry_lapic_addr_override_t * lapic = (acpi20_entry_lapic_addr_override_t *) p;
struct acpi_table_int_src_ovr *p = NULL;
if (lapic->lapic_address) {
iounmap((void *)ipi_base_addr);
ipi_base_addr = (unsigned long) ioremap(lapic->lapic_address, 0);
p = (struct acpi_table_int_src_ovr *) header;
if (!p)
return -EINVAL;
printk("LOCAL ACPI override to 0x%lx(p=0x%lx)\n",
ipi_base_addr, lapic->lapic_address);
}
acpi_table_print_madt_entry(header);
/* Ignore if the platform doesn't support overrides */
if (!iosapic_register_legacy_irq)
return 0;
iosapic_register_legacy_irq(p->bus_irq, p->global_irq,
(p->flags.polarity == 1) ? 1 : 0,
(p->flags.trigger == 1) ? 1 : 0);
return 0;
}
/*
* Parse the ACPI Multiple APIC Description Table
*/
static void __init
acpi20_parse_madt (acpi_madt_t *madt)
static int __init
acpi_parse_nmi_src (acpi_table_entry_header *header)
{
acpi_entry_iosapic_t *iosapic = NULL;
acpi20_entry_lsapic_t *lsapic = NULL;
char *p, *end;
int i;
/* Base address of IPI Message Block */
if (madt->lapic_address) {
ipi_base_addr = (unsigned long) ioremap(madt->lapic_address, 0);
printk("Lapic address set to 0x%lx\n", ipi_base_addr);
} else
printk("Lapic address set to default 0x%lx\n", ipi_base_addr);
struct acpi_table_nmi_src *nmi_src = NULL;
p = (char *) (madt + 1);
end = p + (madt->header.length - sizeof(acpi_madt_t));
nmi_src = (struct acpi_table_nmi_src*) header;
if (!nmi_src)
return -EINVAL;
/* Initialize platform interrupt vector array */
for (i = 0; i < ACPI_MAX_PLATFORM_IRQS; i++)
platform_irq_list[i] = -1;
acpi_table_print_madt_entry(header);
/*
* Split-up entry parsing to ensure ordering.
*/
while (p < end) {
switch (*p) {
case ACPI20_ENTRY_LOCAL_APIC_ADDR_OVERRIDE:
printk("ACPI 2.0 MADT: LOCAL APIC Override\n");
acpi20_lapic_addr_override(p);
break;
case ACPI20_ENTRY_LOCAL_SAPIC:
printk("ACPI 2.0 MADT: LOCAL SAPIC\n");
lsapic = (acpi20_entry_lsapic_t *) p;
acpi20_lsapic(p);
break;
case ACPI20_ENTRY_IO_SAPIC:
iosapic = (acpi_entry_iosapic_t *) p;
if (iosapic_init)
/*
* The PCAT_COMPAT flag indicates that the system has a
* dual-8259 compatible setup.
*/
iosapic_init(iosapic->address, iosapic->irq_base,
#ifdef CONFIG_ITANIUM
1 /* fw on some Itanium systems is broken... */
#else
(madt->flags & MADT_PCAT_COMPAT)
#endif
);
break;
case ACPI20_ENTRY_PLATFORM_INT_SOURCE:
printk("ACPI 2.0 MADT: PLATFORM INT SOURCE\n");
acpi20_platform(p, madt);
break;
case ACPI20_ENTRY_LOCAL_APIC:
printk("ACPI 2.0 MADT: LOCAL APIC entry\n"); break;
case ACPI20_ENTRY_IO_APIC:
printk("ACPI 2.0 MADT: IO APIC entry\n"); break;
case ACPI20_ENTRY_NMI_SOURCE:
printk("ACPI 2.0 MADT: NMI SOURCE entry\n"); break;
case ACPI20_ENTRY_LOCAL_APIC_NMI:
printk("ACPI 2.0 MADT: LOCAL APIC NMI entry\n"); break;
case ACPI20_ENTRY_INT_SRC_OVERRIDE:
break;
default:
printk("ACPI 2.0 MADT: unknown entry skip\n"); break;
break;
}
p += p[1];
}
/* TBD: Support nimsrc entries */
p = (char *) (madt + 1);
end = p + (madt->header.length - sizeof(acpi_madt_t));
return 0;
}
while (p < end) {
switch (*p) {
case ACPI20_ENTRY_LOCAL_APIC:
if (lsapic) break;
printk("ACPI 2.0 MADT: LOCAL APIC entry\n");
/* parse local apic if there's no local Sapic */
break;
case ACPI20_ENTRY_IO_APIC:
if (iosapic) break;
printk("ACPI 2.0 MADT: IO APIC entry\n");
/* parse ioapic if there's no ioSapic */
break;
default:
break;
}
p += p[1];
}
p = (char *) (madt + 1);
end = p + (madt->header.length - sizeof(acpi_madt_t));
static int __init
acpi_parse_madt (unsigned long phys_addr, unsigned long size)
{
int i = 0;
while (p < end) {
switch (*p) {
case ACPI20_ENTRY_INT_SRC_OVERRIDE:
printk("ACPI 2.0 MADT: INT SOURCE Override\n");
acpi_legacy_irq(p);
break;
default:
break;
}
p += p[1];
if (!phys_addr || !size)
return -EINVAL;
acpi_madt = (struct acpi_table_madt *) __va(phys_addr);
if (!acpi_madt) {
printk(KERN_WARNING PREFIX "Unable to map MADT\n");
return -ENODEV;
}
/* Make bootup pretty */
printk(" %d CPUs available, %d CPUs total\n",
available_cpus, total_cpus);
/* Initialize platform interrupt vector array */
for (i = 0; i < ACPI_MAX_PLATFORM_IRQS; i++)
platform_irq_list[i] = -1;
/* Get base address of IPI Message Block */
if (acpi_madt->lapic_address)
ipi_base_addr = (unsigned long)
ioremap(acpi_madt->lapic_address, 0);
printk(KERN_INFO PREFIX "Local APIC address 0x%lx\n", ipi_base_addr);
return 0;
}
int __init
acpi20_parse (acpi20_rsdp_t *rsdp20)
acpi_find_rsdp (unsigned long *rsdp_phys)
{
# ifdef CONFIG_ACPI
acpi_xsdt_t *xsdt;
acpi_desc_table_hdr_t *hdrp;
acpi_madt_t *madt;
int tables, i;
if (strncmp(rsdp20->signature, ACPI_RSDP_SIG, ACPI_RSDP_SIG_LEN)) {
printk("ACPI 2.0 RSDP signature incorrect!\n");
return 0;
} else {
printk("ACPI 2.0 Root System Description Ptr at 0x%lx\n",
(unsigned long)rsdp20);
}
if (!rsdp_phys)
return -EINVAL;
xsdt = __va(rsdp20->xsdt);
hdrp = &xsdt->header;
if (strncmp(hdrp->signature,
ACPI_XSDT_SIG, ACPI_XSDT_SIG_LEN)) {
printk("ACPI 2.0 XSDT signature incorrect. Trying RSDT\n");
/* RSDT parsing here */
if (efi.acpi20) {
(*rsdp_phys) = __pa(efi.acpi20);
return 0;
} else {
printk("ACPI 2.0 XSDT at 0x%lx (p=0x%lx)\n",
(unsigned long)xsdt, (unsigned long)rsdp20->xsdt);
}
else if (efi.acpi) {
printk(KERN_WARNING PREFIX "v1.0/r0.71 tables no longer supported\n");
}
printk("ACPI 2.0: %.6s %.8s %d.%d\n",
hdrp->oem_id,
hdrp->oem_table_id,
hdrp->oem_revision >> 16,
hdrp->oem_revision & 0xffff);
acpi_cf_init((void *)rsdp20);
return -ENODEV;
}
tables =(hdrp->length -sizeof(acpi_desc_table_hdr_t))>>3;
for (i = 0; i < tables; i++) {
hdrp = (acpi_desc_table_hdr_t *) __va(readl_unaligned(&xsdt->entry_ptrs[i]));
printk(" :table %4.4s found\n", hdrp->signature);
#ifdef CONFIG_SERIAL_ACPI
/* Only interested int the MADT table for now ... */
if (strncmp(hdrp->signature,
ACPI_MADT_SIG, ACPI_MADT_SIG_LEN) != 0)
continue;
#include <linux/acpi_serial.h>
/* Save MADT pointer for later */
madt = (acpi_madt_t *) hdrp;
acpi20_parse_madt(madt);
}
static int __init
acpi_parse_spcr (unsigned long phys_addr, unsigned long size)
{
acpi_ser_t *spcr = NULL;
unsigned long global_int = 0;
#ifdef CONFIG_SERIAL_ACPI
/*
* Now we're interested in other tables. We want the iosapics already
* initialized, so we do it in a separate loop.
*/
for (i = 0; i < tables; i++) {
hdrp = (acpi_desc_table_hdr_t *) __va(readl_unaligned(&xsdt->entry_ptrs[i]));
/*
* search for SPCR and DBGP table entries so we can enable
* non-pci interrupts to IO-SAPICs.
*/
if (!strncmp(hdrp->signature, ACPI_SPCRT_SIG, ACPI_SPCRT_SIG_LEN) ||
!strncmp(hdrp->signature, ACPI_DBGPT_SIG, ACPI_DBGPT_SIG_LEN))
{
acpi_ser_t *spcr = (void *)hdrp;
unsigned long global_int;
if (!phys_addr || !size)
return -EINVAL;
setup_serial_acpi(hdrp);
if (!iosapic_register_irq)
return -ENODEV;
/*
* ACPI is able to describe serial ports that live at non-standard
* memory space addresses and use SAPIC interrupts. If not also
* PCI devices, there would be no interrupt vector information for
* them. This checks for and fixes that situation.
* memory addresses and use non-standard interrupts, either via
* direct SAPIC mappings or via PCI interrupts. We handle interrupt
* routing for SAPIC-based (non-PCI) devices here. Interrupt routing
* for PCI devices will be handled when processing the PCI Interrupt
* Routing Table (PRT).
*/
spcr = (acpi_ser_t *) __va(phys_addr);
if (!spcr) {
printk(KERN_WARNING PREFIX "Unable to map SPCR\n");
return -ENODEV;
}
setup_serial_acpi(spcr);
if (spcr->length < sizeof(acpi_ser_t))
/* table is not long enough for full info, thus no int */
break;
/* Table not long enough for full info, thus no interrupt */
return -ENODEV;
/*
* If the device is not in PCI space, but uses a SAPIC interrupt,
* we need to program the SAPIC so that serial can autoprobe for
* the IA64 interrupt vector later on. If the device is in PCI
* space, it should already be setup via the PCI vectors
*/
if (spcr->base_addr.space_id != ACPI_SERIAL_PCICONF_SPACE &&
spcr->int_type == ACPI_SERIAL_INT_SAPIC)
if ((spcr->base_addr.space_id != ACPI_SERIAL_PCICONF_SPACE) &&
(spcr->int_type == ACPI_SERIAL_INT_SAPIC))
{
u32 irq_base;
char *iosapic_address;
int vector;
u32 irq_base = 0;
char *iosapic_address = NULL;
int vector = 0;
/* We have a UART in memory space with a SAPIC interrupt */
global_int = ( (spcr->global_int[3] << 24)
| (spcr->global_int[2] << 16)
| (spcr->global_int[1] << 8)
| spcr->global_int[0]);
/* We have a UART in memory space with an SAPIC interrupt */
if (!iosapic_register_irq)
continue;
global_int = ( (spcr->global_int[3] << 24) |
(spcr->global_int[2] << 16) |
(spcr->global_int[1] << 8) |
(spcr->global_int[0]) );
/* which iosapic does this IRQ belong to? */
if (acpi20_which_iosapic(global_int, madt, &irq_base,
&iosapic_address) == 0)
{
vector = iosapic_register_irq(global_int,
1, /* active high polarity */
1, /* edge triggered */
irq_base,
iosapic_address);
}
}
}
}
#endif
acpi_cf_terminate();
/* Which iosapic does this IRQ belong to? */
# ifdef CONFIG_SMP
if (available_cpus == 0) {
printk("ACPI: Found 0 CPUS; assuming 1\n");
available_cpus = 1; /* We've got at least one of these, no? */
if (0 == acpi_find_iosapic(global_int, &irq_base, &iosapic_address)) {
vector = iosapic_register_irq (global_int, 1, 1,
irq_base, iosapic_address);
}
smp_boot_data.cpu_count = total_cpus;
# endif
# endif /* CONFIG_ACPI */
return 1;
}
return 0;
}
/*
* ACPI 1.0b with 0.71 IA64 extensions functions; should be removed once all
* platforms start supporting ACPI 2.0
*/
/*
* Identify usable CPU's and remember them for SMP bringup later.
*/
static void __init
acpi_lsapic (char *p)
#endif /*CONFIG_SERIAL_ACPI*/
int __init
acpi_boot_init (char *cmdline)
{
int add = 1;
int result = 0;
acpi_entry_lsapic_t *lsapic = (acpi_entry_lsapic_t *) p;
/* Initialize the ACPI boot-time table parser */
result = acpi_table_init(cmdline);
if (0 != result)
return result;
if ((lsapic->flags & LSAPIC_PRESENT) == 0)
return;
/*
* MADT
* ----
* Parse the Multiple APIC Description Table (MADT), if exists.
* Note that this table provides platform SMP configuration
* information -- the successor to MPS tables.
*/
printk(" CPU %d (%.04x:%.04x): ", total_cpus, lsapic->eid, lsapic->id);
result = acpi_table_parse(ACPI_APIC, acpi_parse_madt);
if (1 > result)
return result;
if ((lsapic->flags & LSAPIC_ENABLED) == 0) {
printk("Disabled.\n");
add = 0;
} else if (lsapic->flags & LSAPIC_PERFORMANCE_RESTRICTED) {
printk("Performance Restricted; ignoring.\n");
add = 0;
}
/* Local APIC */
#ifdef CONFIG_SMP
smp_boot_data.cpu_phys_id[total_cpus] = -1;
#endif
if (add) {
printk("Available.\n");
available_cpus++;
#ifdef CONFIG_SMP
smp_boot_data.cpu_phys_id[total_cpus] = (lsapic->id << 8) | lsapic->eid;
#endif /* CONFIG_SMP */
result = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr);
if (0 > result) {
printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n");
return result;
}
total_cpus++;
}
/*
* Info on platform interrupt sources: NMI. PMI, INIT, etc.
*/
static void __init
acpi_platform (char *p)
{
acpi_entry_platform_src_t *plat = (acpi_entry_platform_src_t *) p;
printk("PLATFORM: IOSAPIC %x -> Vector %x on CPU %.04u:%.04u\n",
plat->iosapic_vector, plat->global_vector, plat->eid, plat->id);
}
result = acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic);
if (1 > result) {
printk(KERN_ERR PREFIX "Error parsing MADT - no LAPIC entries!\n");
return -ENODEV;
}
/*
* Parse the ACPI Multiple SAPIC Table
*/
static void __init
acpi_parse_msapic (acpi_sapic_t *msapic)
{
acpi_entry_iosapic_t *iosapic;
char *p, *end;
result = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi);
if (0 > result) {
printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
return result;
}
/* Base address of IPI Message Block */
ipi_base_addr = (unsigned long) ioremap(msapic->interrupt_block, 0);
/* I/O APIC */
p = (char *) (msapic + 1);
end = p + (msapic->header.length - sizeof(acpi_sapic_t));
result = acpi_table_parse_madt(ACPI_MADT_IOSAPIC, acpi_parse_iosapic);
if (1 > result) {
printk(KERN_ERR PREFIX "Error parsing MADT - no IOAPIC entries!\n");
return ((result == 0) ? -ENODEV : result);
}
while (p < end) {
switch (*p) {
case ACPI_ENTRY_LOCAL_SAPIC:
acpi_lsapic(p);
break;
case ACPI_ENTRY_IO_SAPIC:
iosapic = (acpi_entry_iosapic_t *) p;
if (iosapic_init)
/*
* The ACPI I/O SAPIC table doesn't have a PCAT_COMPAT
* flag like the MADT table, but we can safely assume that
* ACPI 1.0b systems have a dual-8259 setup.
*/
iosapic_init(iosapic->address, iosapic->irq_base, 1);
break;
/* System-Level Interrupt Routing */
case ACPI_ENTRY_INT_SRC_OVERRIDE:
acpi_legacy_irq(p);
break;
result = acpi_table_parse_madt(ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src);
if (0 > result) {
printk(KERN_ERR PREFIX "Error parsing platform interrupt source entry\n");
return result;
}
case ACPI_ENTRY_PLATFORM_INT_SOURCE:
acpi_platform(p);
break;
result = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr);
if (0 > result) {
printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n");
return result;
}
default:
break;
result = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src);
if (0 > result) {
printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
return result;
}
/* Move to next table entry. */
p += p[1];
#ifdef CONFIG_SERIAL_ACPI
/*
* TBD: Need phased approach to table parsing (only do those absolutely
* required during boot-up). Recommend expanding concept of fix-
* feature devices (LDM) to include table-based devices such as
* serial ports, EC, SMBus, etc.
*/
acpi_table_parse(ACPI_SPCR, acpi_parse_spcr);
#endif /*CONFIG_SERIAL_ACPI*/
#ifdef CONFIG_SMP
if (available_cpus == 0) {
printk("ACPI: Found 0 CPUS; assuming 1\n");
available_cpus = 1; /* We've got at least one of these, no? */
}
smp_boot_data.cpu_count = total_cpus;
#endif
/* Make boot-up look pretty */
printk("%d CPUs available, %d CPUs total\n", available_cpus, total_cpus);
/* Make bootup pretty */
printk(" %d CPUs available, %d CPUs total\n", available_cpus, total_cpus);
return 0;
}
/* --------------------------------------------------------------------------
PCI Interrupt Routing
-------------------------------------------------------------------------- */
int __init
acpi_parse (acpi_rsdp_t *rsdp)
acpi_get_prt (struct pci_vector_struct **vectors, int *count)
{
# ifdef CONFIG_ACPI
acpi_rsdt_t *rsdt;
acpi_desc_table_hdr_t *hdrp;
long tables, i;
struct pci_vector_struct *vector = NULL;
struct list_head *node = NULL;
struct acpi_prt_entry *entry = NULL;
int i = 0;
if (strncmp(rsdp->signature, ACPI_RSDP_SIG, ACPI_RSDP_SIG_LEN)) {
printk("Uh-oh, ACPI RSDP signature incorrect!\n");
return 0;
}
if (!vectors || !count)
return -EINVAL;
rsdt = __va(rsdp->rsdt);
if (strncmp(rsdt->header.signature, ACPI_RSDT_SIG, ACPI_RSDT_SIG_LEN)) {
printk("Uh-oh, ACPI RDST signature incorrect!\n");
return 0;
*vectors = NULL;
*count = 0;
if (acpi_prts.count < 0) {
printk(KERN_ERR PREFIX "No PCI IRQ routing entries\n");
return -ENODEV;
}
printk("ACPI: %.6s %.8s %d.%d\n", rsdt->header.oem_id, rsdt->header.oem_table_id,
rsdt->header.oem_revision >> 16, rsdt->header.oem_revision & 0xffff);
/* Allocate vectors */
acpi_cf_init(rsdp);
*vectors = kmalloc(sizeof(struct pci_vector_struct) * acpi_prts.count, GFP_KERNEL);
if (!(*vectors))
return -ENOMEM;
tables = (rsdt->header.length - sizeof(acpi_desc_table_hdr_t)) / 8;
for (i = 0; i < tables; i++) {
hdrp = (acpi_desc_table_hdr_t *) __va(rsdt->entry_ptrs[i]);
/* Convert PRT entries to IOSAPIC PCI vectors */
/* Only interested int the MSAPIC table for now ... */
if (strncmp(hdrp->signature, ACPI_SAPIC_SIG, ACPI_SAPIC_SIG_LEN) != 0)
continue;
vector = *vectors;
acpi_parse_msapic((acpi_sapic_t *) hdrp);
list_for_each(node, &acpi_prts.entries) {
entry = (struct acpi_prt_entry *)node;
vector[i].bus = (u16) entry->id.bus;
vector[i].pci_id = (u32) entry->id.dev << 16 | 0xffff;
vector[i].pin = (u8) entry->id.pin;
vector[i].irq = (u8) entry->source.index;
i++;
}
*count = acpi_prts.count;
return 0;
}
acpi_cf_terminate();
/* Assume IA64 always use I/O SAPIC */
# ifdef CONFIG_SMP
if (available_cpus == 0) {
printk("ACPI: Found 0 CPUS; assuming 1\n");
available_cpus = 1; /* We've got at least one of these, no? */
}
smp_boot_data.cpu_count = total_cpus;
# endif
# endif /* CONFIG_ACPI */
return 1;
int __init
acpi_get_interrupt_model (int *type)
{
if (!type)
return -EINVAL;
*type = ACPI_INT_MODEL_IOSAPIC;
return 0;
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7