Skip to content

L
linux
Commit 4ff52a69 authored by Mark Brown's avatar Mark Brown
Browse files
Options

Add NAU8825C support 

Merge series from David Lin <CTLIN0@nuvoton.com>:

This series adds nau8825c support. The driver can be used on
NAU8825B and NAU8825C.
parents 812a0525 955b503b
Show whitespace changes
Inline Side-by-side
Showing with 97 additions and 18 deletions
sound/soc/codecs/nau8825.c
View file @ 4ff52a69
......@@ -53,6 +53,7 @@ struct nau8825_fll {
int mclk_src;
int ratio;
int fll_frac;
int fll_frac_num;
int fll_int;
int clk_ref_div;
};
......@@ -178,6 +179,8 @@ static const struct reg_default nau8825_reg_defaults[] = {
{ NAU8825_REG_CLASSG_CTRL, 0x0 },
{ NAU8825_REG_OPT_EFUSE_CTRL, 0x0 },
{ NAU8825_REG_MISC_CTRL, 0x0 },
{ NAU8825_REG_FLL2_LOWER, 0x0 },
{ NAU8825_REG_FLL2_UPPER, 0x0 },
{ NAU8825_REG_BIAS_ADJ, 0x0 },
{ NAU8825_REG_TRIM_SETTINGS, 0x0 },
{ NAU8825_REG_ANALOG_CONTROL_1, 0x0 },
......@@ -200,6 +203,23 @@ static struct reg_default nau8825_xtalk_baktab[] = {
{ NAU8825_REG_DACR_CTRL, 0x02cf },
};
/* The regmap patch for Rev C */
static const struct reg_sequence nau8825_regmap_patch[] = {
{ NAU8825_REG_FLL2, 0x0000 },
{ NAU8825_REG_FLL4, 0x8010 },
{ NAU8825_REG_FLL_VCO_RSV, 0x0bc0 },
{ NAU8825_REG_INTERRUPT_MASK, 0x0800 },
{ NAU8825_REG_DACL_CTRL, 0x00cf },
{ NAU8825_REG_DACR_CTRL, 0x02cf },
{ NAU8825_REG_OPT_EFUSE_CTRL, 0x0400 },
{ NAU8825_REG_FLL2_LOWER, 0x26e9 },
{ NAU8825_REG_FLL2_UPPER, 0x0031 },
{ NAU8825_REG_ANALOG_CONTROL_2, 0x0020 },
{ NAU8825_REG_ANALOG_ADC_2, 0x0220 },
{ NAU8825_REG_MIC_BIAS, 0x0046 },
};
static const unsigned short logtable[256] = {
0x0000, 0x0171, 0x02e0, 0x044e, 0x05ba, 0x0725, 0x088e, 0x09f7,
0x0b5d, 0x0cc3, 0x0e27, 0x0f8a, 0x10eb, 0x124b, 0x13aa, 0x1508,
......@@ -608,8 +628,13 @@ static void nau8825_xtalk_prepare(struct nau8825 *nau8825)
regmap_update_bits(nau8825->regmap,
NAU8825_REG_INTERRUPT_MASK, NAU8825_IRQ_RMS_EN, 0);
/* Power up left and right DAC */
if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825)
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0);
else
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
}
static void nau8825_xtalk_clean_dac(struct nau8825 *nau8825)
......@@ -622,9 +647,14 @@ static void nau8825_xtalk_clean_dac(struct nau8825 *nau8825)
NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L,
NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L);
/* Power down left and right DAC */
if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825)
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
else
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0);
/* Enable the TESTDAC and disable L/R HP impedance */
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP |
......@@ -855,7 +885,7 @@ static bool nau8825_readable_reg(struct device *dev, unsigned int reg)
case NAU8825_REG_IMM_MODE_CTRL ... NAU8825_REG_IMM_RMS_R:
case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL:
case NAU8825_REG_MISC_CTRL:
case NAU8825_REG_I2C_DEVICE_ID ... NAU8825_REG_SARDOUT_RAM_STATUS:
case NAU8825_REG_I2C_DEVICE_ID ... NAU8825_REG_FLL2_UPPER:
case NAU8825_REG_BIAS_ADJ:
case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2:
case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS:
......@@ -881,6 +911,7 @@ static bool nau8825_writeable_reg(struct device *dev, unsigned int reg)
case NAU8825_REG_IMM_MODE_CTRL:
case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL:
case NAU8825_REG_MISC_CTRL:
case NAU8825_REG_FLL2_LOWER ... NAU8825_REG_FLL2_UPPER:
case NAU8825_REG_BIAS_ADJ:
case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2:
case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS:
......@@ -996,10 +1027,25 @@ static int nau8825_output_dac_event(struct snd_soc_dapm_widget *w,
/* Disables the TESTDAC to let DAC signal pass through. */
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
NAU8825_BIAS_TESTDAC_EN, 0);
if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825)
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0);
else
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
break;
case SND_SOC_DAPM_POST_PMD:
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN);
if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825)
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
else
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0);
break;
default:
return -EINVAL;
......@@ -1207,12 +1253,13 @@ static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = {
NAU8825_REG_POWER_UP_CONTROL, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("Output DACL", 7,
NAU8825_REG_CHARGE_PUMP, 8, 1, nau8825_output_dac_event,
SND_SOC_NOPM, 0, 0, nau8825_output_dac_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_PGA_S("Output DACR", 7,
NAU8825_REG_CHARGE_PUMP, 9, 1, nau8825_output_dac_event,
SND_SOC_NOPM, 0, 0, nau8825_output_dac_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
/* HPOL/R are ungrounded by disabling 16 Ohm pull-downs on playback */
SND_SOC_DAPM_PGA_S("HPOL Pulldown", 8,
NAU8825_REG_HSD_CTRL, 0, 1, NULL, 0),
......@@ -2206,6 +2253,7 @@ static void nau8825_init_regs(struct nau8825 *nau8825)
regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1,
NAU8825_DAC_OVERSAMPLE_MASK, NAU8825_DAC_OVERSAMPLE_64);
/* Disable DACR/L power */
if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825)
regmap_update_bits(regmap, NAU8825_REG_CHARGE_PUMP,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
......@@ -2340,9 +2388,12 @@ static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs,
/* Calculate the FLL 10-bit integer input and the FLL 16-bit fractional
* input based on FDCO, FREF and FLL ratio.
*/
fvco = div_u64(fvco_max << 16, fref * fll_param->ratio);
fll_param->fll_int = (fvco >> 16) & 0x3FF;
fvco = div_u64(fvco_max << fll_param->fll_frac_num, fref * fll_param->ratio);
fll_param->fll_int = (fvco >> fll_param->fll_frac_num) & 0x3FF;
if (fll_param->fll_frac_num == 16)
fll_param->fll_frac = fvco & 0xFFFF;
else
fll_param->fll_frac = fvco & 0xFFFFFF;
return 0;
}
......@@ -2356,8 +2407,16 @@ static void nau8825_fll_apply(struct nau8825 *nau8825,
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1,
NAU8825_FLL_RATIO_MASK | NAU8825_ICTRL_LATCH_MASK,
fll_param->ratio | (0x6 << NAU8825_ICTRL_LATCH_SFT));
/* FLL 16-bit fractional input */
regmap_write(nau8825->regmap, NAU8825_REG_FLL2, fll_param->fll_frac);
/* FLL 16/24 bit fractional input */
if (fll_param->fll_frac_num == 16)
regmap_write(nau8825->regmap, NAU8825_REG_FLL2,
fll_param->fll_frac);
else {
regmap_write(nau8825->regmap, NAU8825_REG_FLL2_LOWER,
fll_param->fll_frac & 0xffff);
regmap_write(nau8825->regmap, NAU8825_REG_FLL2_UPPER,
(fll_param->fll_frac >> 16) & 0xff);
}
/* FLL 10-bit integer input */
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL3,
NAU8825_FLL_INTEGER_MASK, fll_param->fll_int);
......@@ -2399,6 +2458,11 @@ static int nau8825_set_pll(struct snd_soc_component *component, int pll_id, int
struct nau8825_fll fll_param;
int ret, fs;
if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825)
fll_param.fll_frac_num = 16;
else
fll_param.fll_frac_num = 24;
fs = freq_out / 256;
ret = nau8825_calc_fll_param(freq_in, fs, &fll_param);
if (ret < 0) {
......@@ -2930,8 +2994,19 @@ static int nau8825_i2c_probe(struct i2c_client *i2c)
ret);
return ret;
}
if ((value & NAU8825_SOFTWARE_ID_MASK) !=
NAU8825_SOFTWARE_ID_NAU8825) {
nau8825->sw_id = value & NAU8825_SOFTWARE_ID_MASK;
switch (nau8825->sw_id) {
case NAU8825_SOFTWARE_ID_NAU8825:
break;
case NAU8825_SOFTWARE_ID_NAU8825C:
ret = regmap_register_patch(nau8825->regmap, nau8825_regmap_patch,
ARRAY_SIZE(nau8825_regmap_patch));
if (ret) {
dev_err(dev, "Failed to register Rev C patch: %d\n", ret);
return ret;
}
break;
default:
dev_err(dev, "Not a NAU8825 chip\n");
return -ENODEV;
}
......
sound/soc/codecs/nau8825.h
View file @ 4ff52a69
......@@ -75,6 +75,8 @@
#define NAU8825_REG_MISC_CTRL 0x55
#define NAU8825_REG_I2C_DEVICE_ID 0x58
#define NAU8825_REG_SARDOUT_RAM_STATUS 0x59
#define NAU8825_REG_FLL2_LOWER 0x5a
#define NAU8825_REG_FLL2_UPPER 0x5b
#define NAU8825_REG_BIAS_ADJ 0x66
#define NAU8825_REG_TRIM_SETTINGS 0x68
#define NAU8825_REG_ANALOG_CONTROL_1 0x69
......@@ -386,6 +388,7 @@
#define NAU8825_GPIO2JD1 (1 << 7)
#define NAU8825_SOFTWARE_ID_MASK 0x3
#define NAU8825_SOFTWARE_ID_NAU8825 0x0
#define NAU8825_SOFTWARE_ID_NAU8825C 0x1
/* BIAS_ADJ (0x66) */
#define NAU8825_BIAS_HPR_IMP (1 << 15)
......@@ -497,6 +500,7 @@ struct nau8825 {
struct clk *mclk;
struct work_struct xtalk_work;
struct semaphore xtalk_sem;
int sw_id;
int irq;
int mclk_freq; /* 0 - mclk is disabled */
int button_pressed;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7