e1000e: cleanup goto statements to exit points without common work

Per ./Documentation/CodingStyle, goto statements are acceptable for the
centralized exiting of functions when there are multiple exit points which
share common work such as cleanup.  When no common work is required for
multiple exit points, the function should just return at these exit points
instead of doing an unnecessary jump to a centralized return.  This patch
cleans up the inappropriate use of goto statements, and removes unnecessary
variables (or move to a smaller scope) where possible as a result of the
cleanups.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/e1000e/80003es2lan.c

@@ -714,22 +714,19 @@ static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw)
 
 	ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	index = phy_data & GG82563_DSPD_CABLE_LENGTH;
 
-	if (index >= GG82563_CABLE_LENGTH_TABLE_SIZE - 5) {
-		ret_val = -E1000_ERR_PHY;
-		goto out;
-	}
+	if (index >= GG82563_CABLE_LENGTH_TABLE_SIZE - 5)
+		return -E1000_ERR_PHY;
 
 	phy->min_cable_length = e1000_gg82563_cable_length_table[index];
 	phy->max_cable_length = e1000_gg82563_cable_length_table[index + 5];
 
 	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -1348,12 +1345,9 @@ static s32 e1000_read_mac_addr_80003es2lan(struct e1000_hw *hw)
 	 */
 	ret_val = e1000_check_alt_mac_addr_generic(hw);
 	if (ret_val)
-		goto out;
-
-	ret_val = e1000_read_mac_addr_generic(hw);
+		return ret_val;
 
-out:
-	return ret_val;
+	return e1000_read_mac_addr_generic(hw);
 }
 
 /**

drivers/net/ethernet/intel/e1000e/82571.c

@@ -564,7 +564,6 @@ static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
 static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
 {
 	u32 extcnf_ctrl;
-	s32 ret_val = 0;
 	s32 i = 0;
 
 	extcnf_ctrl = er32(EXTCNF_CTRL);
@@ -586,12 +585,10 @@ static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
 		/* Release semaphores */
 		e1000_put_hw_semaphore_82573(hw);
 		e_dbg("Driver can't access the PHY\n");
-		ret_val = -E1000_ERR_PHY;
-		goto out;
+		return -E1000_ERR_PHY;
 	}
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -1409,7 +1406,6 @@ bool e1000_check_phy_82574(struct e1000_hw *hw)
 {
 	u16 status_1kbt = 0;
 	u16 receive_errors = 0;
-	bool phy_hung = false;
 	s32 ret_val = 0;
 
 	/*
@@ -1417,19 +1413,18 @@ bool e1000_check_phy_82574(struct e1000_hw *hw)
 	 * read the Base1000T status register If both are max then PHY is hung.
 	 */
 	ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors);
-
 	if (ret_val)
-		goto out;
+		return false;
 	if (receive_errors == E1000_RECEIVE_ERROR_MAX)  {
 		ret_val = e1e_rphy(hw, E1000_BASE1000T_STATUS, &status_1kbt);
 		if (ret_val)
-			goto out;
+			return false;
 		if ((status_1kbt & E1000_IDLE_ERROR_COUNT_MASK) ==
 		    E1000_IDLE_ERROR_COUNT_MASK)
-			phy_hung = true;
+			return true;
 	}
-out:
-	return phy_hung;
+
+	return false;
 }
 
 /**
@@ -1831,9 +1826,9 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
  **/
 static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw)
 {
-	s32 ret_val = 0;
-
 	if (hw->mac.type == e1000_82571) {
+		s32 ret_val = 0;
+
 		/*
 		 * If there's an alternate MAC address place it in RAR0
 		 * so that it will override the Si installed default perm
@@ -1841,13 +1836,10 @@ static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw)
 		 */
 		ret_val = e1000_check_alt_mac_addr_generic(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 	}
 
-	ret_val = e1000_read_mac_addr_generic(hw);
-
-out:
-	return ret_val;
+	return e1000_read_mac_addr_generic(hw);
 }
 
 /**

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -351,7 +351,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 		 */
 		ret_val = e1000e_phy_hw_reset_generic(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 
 		/* Ungate automatic PHY configuration on non-managed 82579 */
 		if ((hw->mac.type == e1000_pch2lan) &&
@@ -366,7 +366,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 	default:
 		ret_val = e1000e_get_phy_id(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
 			break;
 		/* fall-through */
@@ -377,10 +377,10 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 		 */
 		ret_val = e1000_set_mdio_slow_mode_hv(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		ret_val = e1000e_get_phy_id(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		break;
 	}
 	phy->type = e1000e_get_phy_type_from_id(phy->id);
@@ -406,7 +406,6 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 		break;
 	}
 
-out:
 	return ret_val;
 }
 
@@ -635,20 +634,18 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
 	u16 phy_reg;
 
 	if (hw->phy.type != e1000_phy_82579)
-		goto out;
+		return 0;
 
 	ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	if (hw->dev_spec.ich8lan.eee_disable)
 		phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK;
 	else
 		phy_reg |= I82579_LPI_CTRL_ENABLE_MASK;
 
-	ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
-out:
-	return ret_val;
+	return e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
 }
 
 /**
@@ -672,10 +669,8 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	 * get_link_status flag is set upon receiving a Link Status
 	 * Change or Rx Sequence Error interrupt.
 	 */
-	if (!mac->get_link_status) {
-		ret_val = 0;
-		goto out;
-	}
+	if (!mac->get_link_status)
+		return 0;
 
 	/*
 	 * First we want to see if the MII Status Register reports
@@ -684,16 +679,16 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	 */
 	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	if (hw->mac.type == e1000_pchlan) {
 		ret_val = e1000_k1_gig_workaround_hv(hw, link);
 		if (ret_val)
-			goto out;
+			return ret_val;
 	}
 
 	if (!link)
-		goto out; /* No link detected */
+		return 0; /* No link detected */
 
 	mac->get_link_status = false;
 
@@ -701,13 +696,13 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	case e1000_pch2lan:
 		ret_val = e1000_k1_workaround_lv(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		/* fall-thru */
 	case e1000_pchlan:
 		if (hw->phy.type == e1000_phy_82578) {
 			ret_val = e1000_link_stall_workaround_hv(hw);
 			if (ret_val)
-				goto out;
+				return ret_val;
 		}
 
 		/*
@@ -737,16 +732,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	/* Enable/Disable EEE after link up */
 	ret_val = e1000_set_eee_pchlan(hw);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	/*
 	 * If we are forcing speed/duplex, then we simply return since
 	 * we have already determined whether we have link or not.
 	 */
-	if (!mac->autoneg) {
-		ret_val = -E1000_ERR_CONFIG;
-		goto out;
-	}
+	if (!mac->autoneg)
+		return -E1000_ERR_CONFIG;
 
 	/*
 	 * Auto-Neg is enabled.  Auto Speed Detection takes care
@@ -765,7 +758,6 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	if (ret_val)
 		e_dbg("Error configuring flow control\n");
 
-out:
 	return ret_val;
 }
 
@@ -1008,15 +1000,13 @@ static s32 e1000_write_smbus_addr(struct e1000_hw *hw)
 
 	ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	phy_data &= ~HV_SMB_ADDR_MASK;
 	phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT);
 	phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
-	ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data);
 
-out:
-	return ret_val;
+	return e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data);
 }
 
 /**
@@ -1159,12 +1149,12 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
 	bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled;
 
 	if (hw->mac.type != e1000_pchlan)
-		goto out;
+		return 0;
 
 	/* Wrap the whole flow with the sw flag */
 	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	/* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
 	if (link) {
@@ -1218,7 +1208,7 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
 
 release:
 	hw->phy.ops.release(hw);
-out:
+
 	return ret_val;
 }
 
@@ -1244,7 +1234,7 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 	                                     E1000_KMRNCTRLSTA_K1_CONFIG,
 	                                     &kmrn_reg);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	if (k1_enable)
 		kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE;
@@ -1255,7 +1245,7 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 	                                      E1000_KMRNCTRLSTA_K1_CONFIG,
 	                                      kmrn_reg);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	udelay(20);
 	ctrl_ext = er32(CTRL_EXT);
@@ -1273,8 +1263,7 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 	e1e_flush();
 	udelay(20);
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -1376,13 +1365,13 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 	u16 phy_data;
 
 	if (hw->mac.type != e1000_pchlan)
-		return ret_val;
+		return 0;
 
 	/* Set MDIO slow mode before any other MDIO access */
 	if (hw->phy.type == e1000_phy_82577) {
 		ret_val = e1000_set_mdio_slow_mode_hv(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 	}
 
 	if (((hw->phy.type == e1000_phy_82577) &&
@@ -1419,7 +1408,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
 	hw->phy.ops.release(hw);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	/*
 	 * Configure the K1 Si workaround during phy reset assuming there is
@@ -1427,12 +1416,12 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 	 */
 	ret_val = e1000_k1_gig_workaround_hv(hw, true);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	/* Workaround for link disconnects on a busy hub in half duplex */
 	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
-		goto out;
+		return ret_val;
 	ret_val = hw->phy.ops.read_reg_locked(hw, BM_PORT_GEN_CFG, &phy_data);
 	if (ret_val)
 		goto release;
@@ -1440,7 +1429,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 					       phy_data & 0x00FF);
 release:
 	hw->phy.ops.release(hw);
-out:
+
 	return ret_val;
 }
 
@@ -1497,13 +1486,13 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
 	u16 i;
 
 	if (hw->mac.type != e1000_pch2lan)
-		goto out;
+		return 0;
 
 	/* disable Rx path while enabling/disabling workaround */
 	e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
 	ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg | (1 << 14));
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	if (enable) {
 		/*
@@ -1545,24 +1534,24 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
 						E1000_KMRNCTRLSTA_CTRL_OFFSET,
 						&data);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		ret_val = e1000e_write_kmrn_reg(hw,
 						E1000_KMRNCTRLSTA_CTRL_OFFSET,
 						data | (1 << 0));
 		if (ret_val)
-			goto out;
+			return ret_val;
 		ret_val = e1000e_read_kmrn_reg(hw,
 						E1000_KMRNCTRLSTA_HD_CTRL,
 						&data);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		data &= ~(0xF << 8);
 		data |= (0xB << 8);
 		ret_val = e1000e_write_kmrn_reg(hw,
 						E1000_KMRNCTRLSTA_HD_CTRL,
 						data);
 		if (ret_val)
-			goto out;
+			return ret_val;
 
 		/* Enable jumbo frame workaround in the PHY */
 		e1e_rphy(hw, PHY_REG(769, 23), &data);
@@ -1570,25 +1559,25 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
 		data |= (0x37 << 5);
 		ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		e1e_rphy(hw, PHY_REG(769, 16), &data);
 		data &= ~(1 << 13);
 		ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		e1e_rphy(hw, PHY_REG(776, 20), &data);
 		data &= ~(0x3FF << 2);
 		data |= (0x1A << 2);
 		ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0xF100);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		e1e_rphy(hw, HV_PM_CTRL, &data);
 		ret_val = e1e_wphy(hw, HV_PM_CTRL, data | (1 << 10));
 		if (ret_val)
-			goto out;
+			return ret_val;
 	} else {
 		/* Write MAC register values back to h/w defaults */
 		mac_reg = er32(FFLT_DBG);
@@ -1603,56 +1592,53 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
 						E1000_KMRNCTRLSTA_CTRL_OFFSET,
 						&data);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		ret_val = e1000e_write_kmrn_reg(hw,
 						E1000_KMRNCTRLSTA_CTRL_OFFSET,
 						data & ~(1 << 0));
 		if (ret_val)
-			goto out;
+			return ret_val;
 		ret_val = e1000e_read_kmrn_reg(hw,
 						E1000_KMRNCTRLSTA_HD_CTRL,
 						&data);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		data &= ~(0xF << 8);
 		data |= (0xB << 8);
 		ret_val = e1000e_write_kmrn_reg(hw,
 						E1000_KMRNCTRLSTA_HD_CTRL,
 						data);
 		if (ret_val)
-			goto out;
+			return ret_val;
 
 		/* Write PHY register values back to h/w defaults */
 		e1e_rphy(hw, PHY_REG(769, 23), &data);
 		data &= ~(0x7F << 5);
 		ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		e1e_rphy(hw, PHY_REG(769, 16), &data);
 		data |= (1 << 13);
 		ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		e1e_rphy(hw, PHY_REG(776, 20), &data);
 		data &= ~(0x3FF << 2);
 		data |= (0x8 << 2);
 		ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0x7E00);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		e1e_rphy(hw, HV_PM_CTRL, &data);
 		ret_val = e1e_wphy(hw, HV_PM_CTRL, data & ~(1 << 10));
 		if (ret_val)
-			goto out;
+			return ret_val;
 	}
 
 	/* re-enable Rx path after enabling/disabling workaround */
-	ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~(1 << 14));
-
-out:
-	return ret_val;
+	return e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~(1 << 14));
 }
 
 /**
@@ -1664,14 +1650,14 @@ static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 	s32 ret_val = 0;
 
 	if (hw->mac.type != e1000_pch2lan)
-		goto out;
+		return 0;
 
 	/* Set MDIO slow mode before any other MDIO access */
 	ret_val = e1000_set_mdio_slow_mode_hv(hw);
 
 	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
-		goto out;
+		return ret_val;
 	ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_ADDR,
 					       I82579_MSE_THRESHOLD);
 	if (ret_val)
@@ -1689,7 +1675,6 @@ static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 release:
 	hw->phy.ops.release(hw);
 
-out:
 	return ret_val;
 }
 
@@ -1707,12 +1692,12 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
 	u16 phy_reg;
 
 	if (hw->mac.type != e1000_pch2lan)
-		goto out;
+		return 0;
 
 	/* Set K1 beacon duration based on 1Gbps speed or otherwise */
 	ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE))
 	    == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) {
@@ -1721,7 +1706,7 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
 
 		ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
 		if (ret_val)
-			goto out;
+			return ret_val;
 
 		if (status_reg & HV_M_STATUS_SPEED_1000) {
 			mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
@@ -1734,7 +1719,6 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
 		ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
 	}
 
-out:
 	return ret_val;
 }
 
@@ -1805,7 +1789,7 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
 	u16 reg;
 
 	if (e1000_check_reset_block(hw))
-		goto out;
+		return 0;
 
 	/* Allow time for h/w to get to quiescent state after reset */
 	usleep_range(10000, 20000);
@@ -1815,12 +1799,12 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
 	case e1000_pchlan:
 		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		break;
 	case e1000_pch2lan:
 		ret_val = e1000_lv_phy_workarounds_ich8lan(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		break;
 	default:
 		break;
@@ -1836,7 +1820,7 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
 	/* Configure the LCD with the extended configuration region in NVM */
 	ret_val = e1000_sw_lcd_config_ich8lan(hw);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	/* Configure the LCD with the OEM bits in NVM */
 	ret_val = e1000_oem_bits_config_ich8lan(hw, true);
@@ -1851,18 +1835,16 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
 		/* Set EEE LPI Update Timer to 200usec */
 		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 		ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_ADDR,
 						       I82579_LPI_UPDATE_TIMER);
-		if (ret_val)
-			goto release;
-		ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_DATA,
-						       0x1387);
-release:
+		if (!ret_val)
+			ret_val = hw->phy.ops.write_reg_locked(hw,
+							       I82579_EMI_DATA,
+							       0x1387);
 		hw->phy.ops.release(hw);
 	}
 
-out:
 	return ret_val;
 }
 
@@ -1885,12 +1867,9 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
 
 	ret_val = e1000e_phy_hw_reset_generic(hw);
 	if (ret_val)
-		goto out;
-
-	ret_val = e1000_post_phy_reset_ich8lan(hw);
+		return ret_val;
 
-out:
-	return ret_val;
+	return e1000_post_phy_reset_ich8lan(hw);
 }
 
 /**
@@ -1911,7 +1890,7 @@ static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active)
 
 	ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	if (active)
 		oem_reg |= HV_OEM_BITS_LPLU;
@@ -1921,10 +1900,7 @@ static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active)
 	if (!e1000_check_reset_block(hw))
 		oem_reg |= HV_OEM_BITS_RESTART_AN;
 
-	ret_val = e1e_wphy(hw, HV_OEM_BITS, oem_reg);
-
-out:
-	return ret_val;
+	return e1e_wphy(hw, HV_OEM_BITS, oem_reg);
 }
 
 /**
@@ -3001,7 +2977,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
 	/* Get default ID LED modes */
 	ret_val = hw->nvm.ops.valid_led_default(hw, &data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	mac->ledctl_default = er32(LEDCTL);
 	mac->ledctl_mode1 = mac->ledctl_default;
@@ -3046,8 +3022,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
 		}
 	}
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -3162,11 +3137,11 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	if (ctrl & E1000_CTRL_PHY_RST) {
 		ret_val = hw->phy.ops.get_cfg_done(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 
 		ret_val = e1000_post_phy_reset_ich8lan(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 	}
 
 	/*
@@ -3184,8 +3159,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	kab |= E1000_KABGTXD_BGSQLBIAS;
 	ew32(KABGTXD, kab);
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**

drivers/net/ethernet/intel/e1000e/mac.c

@@ -172,23 +172,23 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
 
 	ret_val = e1000_read_nvm(hw, NVM_COMPAT, 1, &nvm_data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	/* not supported on 82573 */
 	if (hw->mac.type == e1000_82573)
-		goto out;
+		return 0;
 
 	ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
 				 &nvm_alt_mac_addr_offset);
 	if (ret_val) {
 		e_dbg("NVM Read Error\n");
-		goto out;
+		return ret_val;
 	}
 
 	if ((nvm_alt_mac_addr_offset == 0xFFFF) ||
 	    (nvm_alt_mac_addr_offset == 0x0000))
 		/* There is no Alternate MAC Address */
-		goto out;
+		return 0;
 
 	if (hw->bus.func == E1000_FUNC_1)
 		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
@@ -197,7 +197,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
 		ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
 		if (ret_val) {
 			e_dbg("NVM Read Error\n");
-			goto out;
+			return ret_val;
 		}
 
 		alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
@@ -207,7 +207,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
 	/* if multicast bit is set, the alternate address will not be used */
 	if (is_multicast_ether_addr(alt_mac_addr)) {
 		e_dbg("Ignoring Alternate Mac Address with MC bit set\n");
-		goto out;
+		return 0;
 	}
 
 	/*
@@ -217,8 +217,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
 	 */
 	e1000e_rar_set(hw, alt_mac_addr, 0);
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**

drivers/net/ethernet/intel/e1000e/manage.c

@@ -140,7 +140,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
 	/* No manageability, no filtering */
 	if (!e1000e_check_mng_mode(hw)) {
 		hw->mac.tx_pkt_filtering = false;
-		goto out;
+		return hw->mac.tx_pkt_filtering;
 	}
 
 	/*
@@ -150,7 +150,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
 	ret_val = e1000_mng_enable_host_if(hw);
 	if (ret_val) {
 		hw->mac.tx_pkt_filtering = false;
-		goto out;
+		return hw->mac.tx_pkt_filtering;
 	}
 
 	/* Read in the header.  Length and offset are in dwords. */
@@ -170,16 +170,13 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
 	 */
 	if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
 		hw->mac.tx_pkt_filtering = true;
-		goto out;
+		return hw->mac.tx_pkt_filtering;
 	}
 
 	/* Cookie area is valid, make the final check for filtering. */
-	if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) {
+	if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING))
 		hw->mac.tx_pkt_filtering = false;
-		goto out;
-	}
 
-out:
 	return hw->mac.tx_pkt_filtering;
 }
 
@@ -336,12 +333,11 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
 {
 	u32 manc;
 	u32 fwsm, factps;
-	bool ret_val = false;
 
 	manc = er32(MANC);
 
 	if (!(manc & E1000_MANC_RCV_TCO_EN))
-		goto out;
+		return false;
 
 	if (hw->mac.has_fwsm) {
 		fwsm = er32(FWSM);
@@ -349,10 +345,8 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
 
 		if (!(factps & E1000_FACTPS_MNGCG) &&
 		    ((fwsm & E1000_FWSM_MODE_MASK) ==
-		     (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
-			ret_val = true;
-			goto out;
-		}
+		     (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT)))
+			return true;
 	} else if ((hw->mac.type == e1000_82574) ||
 		   (hw->mac.type == e1000_82583)) {
 		u16 data;
@@ -362,16 +356,12 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
 
 		if (!(factps & E1000_FACTPS_MNGCG) &&
 		    ((data & E1000_NVM_INIT_CTRL2_MNGM) ==
-		     (e1000_mng_mode_pt << 13))) {
-			ret_val = true;
-			goto out;
-		}
+		     (e1000_mng_mode_pt << 13)))
+			return true;
 	} else if ((manc & E1000_MANC_SMBUS_EN) &&
 		   !(manc & E1000_MANC_ASF_EN)) {
-		ret_val = true;
-		goto out;
+		return true;
 	}
 
-out:
-	return ret_val;
+	return false;
 }

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -1985,7 +1985,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
 			  e1000_intr_msix_rx, 0, adapter->rx_ring->name,
 			  netdev);
 	if (err)
-		goto out;
+		return err;
 	adapter->rx_ring->itr_register = adapter->hw.hw_addr +
 	    E1000_EITR_82574(vector);
 	adapter->rx_ring->itr_val = adapter->itr;
@@ -2001,7 +2001,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
 			  e1000_intr_msix_tx, 0, adapter->tx_ring->name,
 			  netdev);
 	if (err)
-		goto out;
+		return err;
 	adapter->tx_ring->itr_register = adapter->hw.hw_addr +
 	    E1000_EITR_82574(vector);
 	adapter->tx_ring->itr_val = adapter->itr;
@@ -2010,12 +2010,11 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
 	err = request_irq(adapter->msix_entries[vector].vector,
 			  e1000_msix_other, 0, netdev->name, netdev);
 	if (err)
-		goto out;
+		return err;
 
 	e1000_configure_msix(adapter);
+
 	return 0;
-out:
-	return err;
 }
 
 /**
@@ -2367,7 +2366,7 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
 	unsigned int retval = itr_setting;
 
 	if (packets == 0)
-		goto update_itr_done;
+		return itr_setting;
 
 	switch (itr_setting) {
 	case lowest_latency:
@@ -2402,7 +2401,6 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
 		break;
 	}
 
-update_itr_done:
 	return retval;
 }
 

drivers/net/ethernet/intel/e1000e/nvm.c

@@ -446,20 +446,19 @@ s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
 
 	if (pba_num == NULL) {
 		e_dbg("PBA string buffer was null\n");
-		ret_val = E1000_ERR_INVALID_ARGUMENT;
-		goto out;
+		return -E1000_ERR_INVALID_ARGUMENT;
 	}
 
 	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
 	if (ret_val) {
 		e_dbg("NVM Read Error\n");
-		goto out;
+		return ret_val;
 	}
 
 	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
 	if (ret_val) {
 		e_dbg("NVM Read Error\n");
-		goto out;
+		return ret_val;
 	}
 
 	/*
@@ -499,25 +498,23 @@ s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
 				pba_num[offset] += 'A' - 0xA;
 		}
 
-		goto out;
+		return 0;
 	}
 
 	ret_val = e1000_read_nvm(hw, pba_ptr, 1, &length);
 	if (ret_val) {
 		e_dbg("NVM Read Error\n");
-		goto out;
+		return ret_val;
 	}
 
 	if (length == 0xFFFF || length == 0) {
 		e_dbg("NVM PBA number section invalid length\n");
-		ret_val = E1000_ERR_NVM_PBA_SECTION;
-		goto out;
+		return -E1000_ERR_NVM_PBA_SECTION;
 	}
 	/* check if pba_num buffer is big enough */
 	if (pba_num_size < (((u32)length * 2) - 1)) {
 		e_dbg("PBA string buffer too small\n");
-		ret_val = E1000_ERR_NO_SPACE;
-		goto out;
+		return -E1000_ERR_NO_SPACE;
 	}
 
 	/* trim pba length from start of string */
@@ -528,15 +525,14 @@ s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
 		ret_val = e1000_read_nvm(hw, pba_ptr + offset, 1, &nvm_data);
 		if (ret_val) {
 			e_dbg("NVM Read Error\n");
-			goto out;
+			return ret_val;
 		}
 		pba_num[offset * 2] = (u8)(nvm_data >> 8);
 		pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
 	}
 	pba_num[offset * 2] = '\0';
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**

drivers/net/ethernet/intel/e1000e/phy.c

@@ -133,29 +133,29 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw)
 	u16 retry_count = 0;
 
 	if (!phy->ops.read_reg)
-		goto out;
+		return 0;
 
 	while (retry_count < 2) {
 		ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
 		if (ret_val)
-			goto out;
+			return ret_val;
 
 		phy->id = (u32)(phy_id << 16);
 		udelay(20);
 		ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
 		if (ret_val)
-			goto out;
+			return ret_val;
 
 		phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
 		phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
 
 		if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
-			goto out;
+			return 0;
 
 		retry_count++;
 	}
-out:
-	return ret_val;
+
+	return 0;
 }
 
 /**
@@ -383,28 +383,24 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
 
 	if (!locked) {
 		if (!hw->phy.ops.acquire)
-			goto out;
+			return 0;
 
 		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 	}
 
-	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+	if (offset > MAX_PHY_MULTI_PAGE_REG)
 		ret_val = e1000e_write_phy_reg_mdic(hw,
 						    IGP01E1000_PHY_PAGE_SELECT,
 						    (u16)offset);
-		if (ret_val)
-			goto release;
-	}
-
-	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
-	                                  data);
-
-release:
+	if (!ret_val)
+		ret_val = e1000e_read_phy_reg_mdic(hw,
+						   MAX_PHY_REG_ADDRESS & offset,
+						   data);
 	if (!locked)
 		hw->phy.ops.release(hw);
-out:
+
 	return ret_val;
 }
 
@@ -454,29 +450,24 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
 
 	if (!locked) {
 		if (!hw->phy.ops.acquire)
-			goto out;
+			return 0;
 
 		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 	}
 
-	if (offset > MAX_PHY_MULTI_PAGE_REG) {
+	if (offset > MAX_PHY_MULTI_PAGE_REG)
 		ret_val = e1000e_write_phy_reg_mdic(hw,
 						    IGP01E1000_PHY_PAGE_SELECT,
 						    (u16)offset);
-		if (ret_val)
-			goto release;
-	}
-
-	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
-					    data);
-
-release:
+	if (!ret_val)
+		ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS &
+							offset,
+						    data);
 	if (!locked)
 		hw->phy.ops.release(hw);
 
-out:
 	return ret_val;
 }
 
@@ -523,15 +514,16 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
                                  bool locked)
 {
 	u32 kmrnctrlsta;
-	s32 ret_val = 0;
 
 	if (!locked) {
+		s32 ret_val = 0;
+
 		if (!hw->phy.ops.acquire)
-			goto out;
+			return 0;
 
 		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 	}
 
 	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
@@ -547,8 +539,7 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
 	if (!locked)
 		hw->phy.ops.release(hw);
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -596,15 +587,16 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
                                   bool locked)
 {
 	u32 kmrnctrlsta;
-	s32 ret_val = 0;
 
 	if (!locked) {
+		s32 ret_val = 0;
+
 		if (!hw->phy.ops.acquire)
-			goto out;
+			return 0;
 
 		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 	}
 
 	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
@@ -617,8 +609,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
 	if (!locked)
 		hw->phy.ops.release(hw);
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -663,17 +654,14 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
 	/* Enable CRS on Tx. This must be set for half-duplex operation. */
 	ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	phy_data |= I82577_CFG_ASSERT_CRS_ON_TX;
 
 	/* Enable downshift */
 	phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
 
-	ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data);
-
-out:
-	return ret_val;
+	return e1e_wphy(hw, I82577_CFG_REG, phy_data);
 }
 
 /**
@@ -1397,25 +1385,25 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
 
 	ret_val = e1e_rphy(hw, PHY_CONTROL, &data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	e1000e_phy_force_speed_duplex_setup(hw, &data);
 
 	ret_val = e1e_wphy(hw, PHY_CONTROL, data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	/* Disable MDI-X support for 10/100 */
 	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	data &= ~IFE_PMC_AUTO_MDIX;
 	data &= ~IFE_PMC_FORCE_MDIX;
 
 	ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	e_dbg("IFE PMC: %X\n", data);
 
@@ -1429,7 +1417,7 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
 		                                     100000,
 		                                     &link);
 		if (ret_val)
-			goto out;
+			return ret_val;
 
 		if (!link)
 			e_dbg("Link taking longer than expected.\n");
@@ -1440,11 +1428,10 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
 		                                     100000,
 		                                     &link);
 		if (ret_val)
-			goto out;
+			return ret_val;
 	}
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -1829,22 +1816,20 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
 
 	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
 	        M88E1000_PSSR_CABLE_LENGTH_SHIFT;
-	if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
-		ret_val = -E1000_ERR_PHY;
-		goto out;
-	}
+
+	if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1)
+		return -E1000_ERR_PHY;
 
 	phy->min_cable_length = e1000_m88_cable_length_table[index];
 	phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
 
 	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -2069,24 +2054,23 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
 
 	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	if (!link) {
 		e_dbg("Phy info is only valid if link is up\n");
-		ret_val = -E1000_ERR_CONFIG;
-		goto out;
+		return -E1000_ERR_CONFIG;
 	}
 
 	ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 	phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
 	                           ? false : true;
 
 	if (phy->polarity_correction) {
 		ret_val = e1000_check_polarity_ife(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 	} else {
 		/* Polarity is forced */
 		phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
@@ -2096,7 +2080,7 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
 
 	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false;
 
@@ -2105,8 +2089,7 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
 	phy->local_rx = e1000_1000t_rx_status_undefined;
 	phy->remote_rx = e1000_1000t_rx_status_undefined;
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -2365,7 +2348,6 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
  **/
 s32 e1000e_determine_phy_address(struct e1000_hw *hw)
 {
-	s32 ret_val = -E1000_ERR_PHY_TYPE;
 	u32 phy_addr = 0;
 	u32 i;
 	enum e1000_phy_type phy_type = e1000_phy_unknown;
@@ -2384,17 +2366,15 @@ s32 e1000e_determine_phy_address(struct e1000_hw *hw)
 			 * If phy_type is valid, break - we found our
 			 * PHY address
 			 */
-			if (phy_type  != e1000_phy_unknown) {
-				ret_val = 0;
-				goto out;
-			}
+			if (phy_type  != e1000_phy_unknown)
+				return 0;
+
 			usleep_range(1000, 2000);
 			i++;
 		} while (i < 10);
 	}
 
-out:
-	return ret_val;
+	return -E1000_ERR_PHY_TYPE;
 }
 
 /**
@@ -2638,14 +2618,14 @@ s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
 	ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
 	if (ret_val) {
 		e_dbg("Could not set Port Control page\n");
-		goto out;
+		return ret_val;
 	}
 
 	ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
 	if (ret_val) {
 		e_dbg("Could not read PHY register %d.%d\n",
 		      BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
-		goto out;
+		return ret_val;
 	}
 
 	/*
@@ -2660,15 +2640,14 @@ s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
 	if (ret_val) {
 		e_dbg("Could not write PHY register %d.%d\n",
 		      BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
-		goto out;
+		return ret_val;
 	}
 
-	/* Select Host Wakeup Registers page */
-	ret_val = e1000_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT));
-
-	/* caller now able to write registers on the Wakeup registers page */
-out:
-	return ret_val;
+	/*
+	 * Select Host Wakeup Registers page - caller now able to write
+	 * registers on the Wakeup registers page
+	 */
+	return e1000_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT));
 }
 
 /**
@@ -2690,7 +2669,7 @@ s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
 	ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
 	if (ret_val) {
 		e_dbg("Could not set Port Control page\n");
-		goto out;
+		return ret_val;
 	}
 
 	/* Restore 769.17 to its original value */
@@ -2698,7 +2677,7 @@ s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
 	if (ret_val)
 		e_dbg("Could not restore PHY register %d.%d\n",
 		      BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
-out:
+
 	return ret_val;
 }
 
@@ -2746,7 +2725,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 		ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
 		if (ret_val) {
 			e_dbg("Could not enable PHY wakeup reg access\n");
-			goto out;
+			return ret_val;
 		}
 	}
 
@@ -2756,7 +2735,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
 	if (ret_val) {
 		e_dbg("Could not write address opcode to page %d\n", page);
-		goto out;
+		return ret_val;
 	}
 
 	if (read) {
@@ -2771,13 +2750,12 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 
 	if (ret_val) {
 		e_dbg("Could not access PHY reg %d.%d\n", page, reg);
-		goto out;
+		return ret_val;
 	}
 
 	if (!page_set)
 		ret_val = e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
 
-out:
 	return ret_val;
 }
 
@@ -3133,7 +3111,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
 	ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
 	if (ret_val) {
 		e_dbg("Could not write the Address Offset port register\n");
-		goto out;
+		return ret_val;
 	}
 
 	/* Read or write the data value next */
@@ -3142,12 +3120,9 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
 	else
 		ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
 
-	if (ret_val) {
+	if (ret_val)
 		e_dbg("Could not access the Data port register\n");
-		goto out;
-	}
 
-out:
 	return ret_val;
 }
 
@@ -3168,17 +3143,17 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 	u16 data;
 
 	if (hw->phy.type != e1000_phy_82578)
-		goto out;
+		return 0;
 
 	/* Do not apply workaround if in PHY loopback bit 14 set */
 	e1e_rphy(hw, PHY_CONTROL, &data);
 	if (data & PHY_CONTROL_LB)
-		goto out;
+		return 0;
 
 	/* check if link is up and at 1Gbps */
 	ret_val = e1e_rphy(hw, BM_CS_STATUS, &data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	data &= BM_CS_STATUS_LINK_UP |
 	        BM_CS_STATUS_RESOLVED |
@@ -3187,7 +3162,7 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 	if (data != (BM_CS_STATUS_LINK_UP |
 	             BM_CS_STATUS_RESOLVED |
 	             BM_CS_STATUS_SPEED_1000))
-		goto out;
+		return 0;
 
 	mdelay(200);
 
@@ -3195,12 +3170,9 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 	ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC |
 			   HV_MUX_DATA_CTRL_FORCE_SPEED);
 	if (ret_val)
-		goto out;
-
-	ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC);
+		return ret_val;
 
-out:
-	return ret_val;
+	return e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC);
 }
 
 /**
@@ -3242,13 +3214,13 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 
 	ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
 
 	ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	udelay(1);
 
@@ -3260,7 +3232,7 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 		                                     100000,
 		                                     &link);
 		if (ret_val)
-			goto out;
+			return ret_val;
 
 		if (!link)
 			e_dbg("Link taking longer than expected.\n");
@@ -3270,11 +3242,8 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 		                                     PHY_FORCE_LIMIT,
 		                                     100000,
 		                                     &link);
-		if (ret_val)
-			goto out;
 	}
 
-out:
 	return ret_val;
 }
 
@@ -3296,23 +3265,22 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
 
 	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	if (!link) {
 		e_dbg("Phy info is only valid if link is up\n");
-		ret_val = -E1000_ERR_CONFIG;
-		goto out;
+		return -E1000_ERR_CONFIG;
 	}
 
 	phy->polarity_correction = true;
 
 	ret_val = e1000_check_polarity_82577(hw);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	phy->is_mdix = (data & I82577_PHY_STATUS2_MDIX) ? true : false;
 
@@ -3320,11 +3288,11 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
 	    I82577_PHY_STATUS2_SPEED_1000MBPS) {
 		ret_val = hw->phy.ops.get_cable_length(hw);
 		if (ret_val)
-			goto out;
+			return ret_val;
 
 		ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data);
 		if (ret_val)
-			goto out;
+			return ret_val;
 
 		phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
 		                ? e1000_1000t_rx_status_ok
@@ -3339,8 +3307,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
 		phy->remote_rx = e1000_1000t_rx_status_undefined;
 	}
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -3358,7 +3325,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
 
 	ret_val = e1e_rphy(hw, I82577_PHY_DIAG_STATUS, &phy_data);
 	if (ret_val)
-		goto out;
+		return ret_val;
 
 	length = (phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
 	         I82577_DSTATUS_CABLE_LENGTH_SHIFT;
@@ -3368,6 +3335,5 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
 
 	phy->cable_length = length;
 
-out:
-	return ret_val;
+	return 0;
 }