Commit 50724188 authored by Kai Germaschewski's avatar Kai Germaschewski

Cleanup drivers/usb/Makefile and Config.in's

Use the fact that now O_TARGET == <subdir.o> to simplify the
Makefile.
Correct mod-subdirs use.
Remove unneeded code from drivers/usb/*/Config.in
parent 8c06bcbd
...@@ -33,14 +33,5 @@ if [ "$CONFIG_USB" = "y" -o "$CONFIG_USB" = "m" ]; then ...@@ -33,14 +33,5 @@ if [ "$CONFIG_USB" = "y" -o "$CONFIG_USB" = "m" ]; then
dep_tristate ' USB Auerswald ISDN support (EXPERIMENTAL)' CONFIG_USB_AUERSWALD $CONFIG_USB $CONFIG_EXPERIMENTAL dep_tristate ' USB Auerswald ISDN support (EXPERIMENTAL)' CONFIG_USB_AUERSWALD $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' USB Diamond Rio500 support (EXPERIMENTAL)' CONFIG_USB_RIO500 $CONFIG_USB $CONFIG_EXPERIMENTAL dep_tristate ' USB Diamond Rio500 support (EXPERIMENTAL)' CONFIG_USB_RIO500 $CONFIG_USB $CONFIG_EXPERIMENTAL
# Turn on CONFIG_USB_MISC if any of the drivers are compiled into the kernel
# to make our Makefile logic a bit simpler
if [ "$CONFIG_USB_USS720" = "y" -o "$CONFIG_USB_EMI26" = "y" -o "$CONFIG_USB_RIO500" = "y" ]; then
define_bool CONFIG_USB_MISC y
fi
if [ "$CONFIG_USB_AUERSWALD" = "y" -o "$CONFIG_USB_TIGL" = "y" ]; then
define_bool CONFIG_USB_MISC y
fi
fi fi
endmenu endmenu
...@@ -5,42 +5,27 @@ ...@@ -5,42 +5,27 @@
O_TARGET := usbdrv.o O_TARGET := usbdrv.o
# Object files in subdirectories # Object files in subdirectories
mod-subdirs := core host class media net serial storage image misc input mod-subdirs := serial
subdir-$(CONFIG_USB) += core subdir-$(CONFIG_USB) += core
ifeq ($(CONFIG_USB),y)
obj-y += core/core.o
endif
subdir-$(CONFIG_USB_EHCI_HCD) += host subdir-$(CONFIG_USB_EHCI_HCD) += host
subdir-$(CONFIG_USB_OHCI_HCD) += host subdir-$(CONFIG_USB_OHCI_HCD) += host
subdir-$(CONFIG_USB_OHCI) += host subdir-$(CONFIG_USB_OHCI) += host
subdir-$(CONFIG_USB_UHCI_ALT) += host subdir-$(CONFIG_USB_UHCI_ALT) += host
subdir-$(CONFIG_USB_UHCI) += host subdir-$(CONFIG_USB_UHCI) += host
ifeq ($(CONFIG_USB_HOST),y)
obj-y += host/host.o
endif
subdir-$(CONFIG_USB_ACM) += class subdir-$(CONFIG_USB_ACM) += class
subdir-$(CONFIG_USB_AUDIO) += class subdir-$(CONFIG_USB_AUDIO) += class
subdir-$(CONFIG_USB_BLUETOOTH) += class subdir-$(CONFIG_USB_BLUETOOTH) += class
subdir-$(CONFIG_USB_PRINTER) += class subdir-$(CONFIG_USB_PRINTER) += class
ifeq ($(CONFIG_USB_CLASS),y)
obj-y += class/class.o
endif
subdir-$(CONFIG_USB_STORAGE) += storage subdir-$(CONFIG_USB_STORAGE) += storage
ifeq ($(CONFIG_USB_STORAGE),y)
obj-y += storage/storage.o
endif
subdir-$(CONFIG_USB_HID) += input subdir-$(CONFIG_USB_HID) += input
subdir-$(CONFIG_USB_KBD) += input subdir-$(CONFIG_USB_KBD) += input
subdir-$(CONFIG_USB_MOUSE) += input subdir-$(CONFIG_USB_MOUSE) += input
subdir-$(CONFIG_USB_WACOM) += input subdir-$(CONFIG_USB_WACOM) += input
ifeq ($(CONFIG_USB_INPUT),y)
obj-y += input/input.o
endif
subdir-$(CONFIG_USB_DABUSB) += media subdir-$(CONFIG_USB_DABUSB) += media
subdir-$(CONFIG_USB_DSBR) += media subdir-$(CONFIG_USB_DSBR) += media
...@@ -51,9 +36,6 @@ subdir-$(CONFIG_USB_PWC) += media ...@@ -51,9 +36,6 @@ subdir-$(CONFIG_USB_PWC) += media
subdir-$(CONFIG_USB_SE401) += media subdir-$(CONFIG_USB_SE401) += media
subdir-$(CONFIG_USB_STV680) += media subdir-$(CONFIG_USB_STV680) += media
subdir-$(CONFIG_USB_VICAM) += media subdir-$(CONFIG_USB_VICAM) += media
ifeq ($(CONFIG_USB_MEDIA),y)
obj-y += media/media.o
endif
subdir-$(CONFIG_USB_CATC) += net subdir-$(CONFIG_USB_CATC) += net
subdir-$(CONFIG_USB_CDCETHER) += net subdir-$(CONFIG_USB_CDCETHER) += net
...@@ -61,31 +43,21 @@ subdir-$(CONFIG_USB_KAWETH) += net ...@@ -61,31 +43,21 @@ subdir-$(CONFIG_USB_KAWETH) += net
subdir-$(CONFIG_USB_PEGASUS) += net subdir-$(CONFIG_USB_PEGASUS) += net
subdir-$(CONFIG_USB_RTL8150) += net subdir-$(CONFIG_USB_RTL8150) += net
subdir-$(CONFIG_USB_USBNET) += net subdir-$(CONFIG_USB_USBNET) += net
ifeq ($(CONFIG_USB_NET),y)
obj-y += net/net.o
endif
subdir-$(CONFIG_USB_DC2XX) += image subdir-$(CONFIG_USB_DC2XX) += image
subdir-$(CONFIG_USB_HPUSBSCSI) += image subdir-$(CONFIG_USB_HPUSBSCSI) += image
subdir-$(CONFIG_USB_MDC800) += image subdir-$(CONFIG_USB_MDC800) += image
subdir-$(CONFIG_USB_MICROTEK) += image subdir-$(CONFIG_USB_MICROTEK) += image
subdir-$(CONFIG_USB_SCANNER) += image subdir-$(CONFIG_USB_SCANNER) += image
ifeq ($(CONFIG_USB_IMAGE),y)
obj-y += image/image.o
endif
subdir-$(CONFIG_USB_SERIAL) += serial subdir-$(CONFIG_USB_SERIAL) += serial
ifeq ($(CONFIG_USB_SERIAL),y)
obj-y += serial/serial.o
endif
subdir-$(CONFIG_USB_AUERSWALD) += misc subdir-$(CONFIG_USB_AUERSWALD) += misc
subdir-$(CONFIG_USB_EMI26) += misc subdir-$(CONFIG_USB_EMI26) += misc
subdir-$(CONFIG_USB_RIO500) += misc subdir-$(CONFIG_USB_RIO500) += misc
subdir-$(CONFIG_USB_TIGL) += misc subdir-$(CONFIG_USB_TIGL) += misc
subdir-$(CONFIG_USB_USS720) += misc subdir-$(CONFIG_USB_USS720) += misc
ifeq ($(CONFIG_USB_MISC),y)
obj-y += misc/misc.o obj-y += $(join $(subdir-y),$(subdir-y:%=/%.o))
endif
include $(TOPDIR)/Rules.make include $(TOPDIR)/Rules.make
...@@ -6,14 +6,3 @@ dep_tristate ' USB Audio support' CONFIG_USB_AUDIO $CONFIG_USB $CONFIG_SOUND ...@@ -6,14 +6,3 @@ dep_tristate ' USB Audio support' CONFIG_USB_AUDIO $CONFIG_USB $CONFIG_SOUND
dep_tristate ' USB Bluetooth TTY support' CONFIG_USB_BLUETOOTH_TTY $CONFIG_USB dep_tristate ' USB Bluetooth TTY support' CONFIG_USB_BLUETOOTH_TTY $CONFIG_USB
dep_tristate ' USB Modem (CDC ACM) support' CONFIG_USB_ACM $CONFIG_USB dep_tristate ' USB Modem (CDC ACM) support' CONFIG_USB_ACM $CONFIG_USB
dep_tristate ' USB Printer support' CONFIG_USB_PRINTER $CONFIG_USB dep_tristate ' USB Printer support' CONFIG_USB_PRINTER $CONFIG_USB
# Turn on CONFIG_USB_CLASS if any of the drivers are compiled into the kernel
# to make our Makefile logic a bit simpler.
if [ "$CONFIG_USB_AUDIO" = "y" -o "$CONFIG_USB_BLUETOOTH_TTY" = "y" ]; then
define_bool CONFIG_USB_CLASS y
fi
if [ "$CONFIG_USB_ACM" = "y" -o "$CONFIG_USB_PRINTER" = "y" ]; then
define_bool CONFIG_USB_CLASS y
fi
...@@ -14,12 +14,3 @@ else ...@@ -14,12 +14,3 @@ else
define_bool CONFIG_USB_UHCI_ALT n define_bool CONFIG_USB_UHCI_ALT n
fi fi
dep_tristate ' OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support' CONFIG_USB_OHCI $CONFIG_USB dep_tristate ' OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support' CONFIG_USB_OHCI $CONFIG_USB
# Turn on CONFIG_USB_HOST if any of the Host controller drivers are compiled
# into the kernel to make our Makefile logic a bit simpler
if [ "$CONFIG_USB_EHCI_HCD" = "y" -o "$CONFIG_USB_OHCI_HCD" = "y" -o "$CONFIG_USB_UHCI_HCD" = "y" ]; then
define_bool CONFIG_USB_HOST y
fi
if [ "$CONFIG_USB_UHCI" = "y" -o "$CONFIG_USB_UHCI_ALT" = "y" -o "$CONFIG_USB_OHCI" = "y" ]; then
define_bool CONFIG_USB_HOST y
fi
...@@ -6,13 +6,3 @@ dep_tristate ' USB Mustek MDC800 Digital Camera support (EXPERIMENTAL)' CONFIG_ ...@@ -6,13 +6,3 @@ dep_tristate ' USB Mustek MDC800 Digital Camera support (EXPERIMENTAL)' CONFIG_
dep_tristate ' USB Scanner support' CONFIG_USB_SCANNER $CONFIG_USB dep_tristate ' USB Scanner support' CONFIG_USB_SCANNER $CONFIG_USB
dep_tristate ' Microtek X6USB scanner support' CONFIG_USB_MICROTEK $CONFIG_USB $CONFIG_SCSI dep_tristate ' Microtek X6USB scanner support' CONFIG_USB_MICROTEK $CONFIG_USB $CONFIG_SCSI
dep_tristate ' HP53xx USB scanner support (EXPERIMENTAL)' CONFIG_USB_HPUSBSCSI $CONFIG_USB $CONFIG_SCSI $CONFIG_EXPERIMENTAL dep_tristate ' HP53xx USB scanner support (EXPERIMENTAL)' CONFIG_USB_HPUSBSCSI $CONFIG_USB $CONFIG_SCSI $CONFIG_EXPERIMENTAL
# Turn on CONFIG_USB_IMAGE if any of the drivers are compiled into the kernel to
# make our Makefile logic a bit simpler
if [ "$CONFIG_USB_MDC800" = "y" -o "$CONFIG_USB_SCANNER" = "y" ]; then
define_bool CONFIG_USB_IMAGE y
fi
if [ "$CONFIG_USB_MICROTEK" = "y" -o "$CONFIG_USB_HPUSBSCSI" = "y" ]; then
define_bool CONFIG_USB_IMAGE y
fi
...@@ -16,12 +16,3 @@ fi ...@@ -16,12 +16,3 @@ fi
dep_tristate ' Wacom Intuos/Graphire tablet support' CONFIG_USB_WACOM $CONFIG_USB $CONFIG_INPUT dep_tristate ' Wacom Intuos/Graphire tablet support' CONFIG_USB_WACOM $CONFIG_USB $CONFIG_INPUT
# Turn on CONFIG_USB_INPUT if any of the drivers are compiled into the kernel
# to make our Makefile logic a bit simpler.
if [ "$CONFIG_USB_HID" = "y" -o "$CONFIG_USB_KBD" = "y" -o "$CONFIG_USB_MOUSE" = "y" ]; then
define_bool CONFIG_USB_INPUT y
fi
if [ "$CONFIG_USB_WACOM" = "y" ]; then
define_bool CONFIG_USB_INPUT y
fi
...@@ -14,16 +14,3 @@ dep_tristate ' USB OV511 Camera support' CONFIG_USB_OV511 $CONFIG_USB $CONFIG_V ...@@ -14,16 +14,3 @@ dep_tristate ' USB OV511 Camera support' CONFIG_USB_OV511 $CONFIG_USB $CONFIG_V
dep_tristate ' USB Philips Cameras' CONFIG_USB_PWC $CONFIG_USB $CONFIG_VIDEO_DEV dep_tristate ' USB Philips Cameras' CONFIG_USB_PWC $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB SE401 Camera support' CONFIG_USB_SE401 $CONFIG_USB $CONFIG_VIDEO_DEV dep_tristate ' USB SE401 Camera support' CONFIG_USB_SE401 $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB STV680 (Pencam) Camera support' CONFIG_USB_STV680 $CONFIG_USB $CONFIG_VIDEO_DEV dep_tristate ' USB STV680 (Pencam) Camera support' CONFIG_USB_STV680 $CONFIG_USB $CONFIG_VIDEO_DEV
# Turn on CONFIG_USB_MEDIA if any of the drivers are compiled into the kernel
# to make our Makefile logic a bit simpler
if [ "$CONFIG_USB_IBMCAM" = "y" -o "$CONFIG_USB_OV511" = "y" -o "$CONFIG_USB_PWC" = "y" ]; then
define_bool CONFIG_USB_MEDIA y
fi
if [ "$CONFIG_USB_SE401" = "y" -o "$CONFIG_USB_STV680" = "y" -o "$CONFIG_USB_VICAM" = "y" ]; then
define_bool CONFIG_USB_MEDIA y
fi
if [ "$CONFIG_USB_DSBR" = "y" -o "$CONFIG_USB_KONICAWC" = "y" -o "$CONFIG_USB_DABUSB" = "y" ]; then
define_bool CONFIG_USB_MEDIA y
fi
...@@ -12,13 +12,3 @@ else ...@@ -12,13 +12,3 @@ else
dep_tristate ' USB RTL8150 based ethernet device support (EXPERIMENTAL)' CONFIG_USB_RTL8150 $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL dep_tristate ' USB RTL8150 based ethernet device support (EXPERIMENTAL)' CONFIG_USB_RTL8150 $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
dep_tristate ' USB-to-USB Networking cable device support' CONFIG_USB_USBNET $CONFIG_USB $CONFIG_NET dep_tristate ' USB-to-USB Networking cable device support' CONFIG_USB_USBNET $CONFIG_USB $CONFIG_NET
fi fi
# Turn on CONFIG_USB_NET if any of the drivers are compiled into the kernel to
# make our Makefile logic a bit simpler
if [ "$CONFIG_USB_PEGASUS" = "y" -o "$CONFIG_USB_RTL8150" = "y" -o "$CONFIG_USB_KAWETH" = "y" ]; then
define_bool CONFIG_USB_NET y
fi
if [ "$CONFIG_USB_CATC" = "y" -o "$CONFIG_USB_USBNET" = "y" -o "$CONFIG_USB_CDCETHER" = "y" ]; then
define_bool CONFIG_USB_NET y
fi
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment