Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "A smallish number of general cleanup commits this release cycle.  Some
  of these are minor tweaks:

   - shmobile change of binding for their GIC (using arm,pl390 now)
   - ARCH_RENESAS introduction
   - Misc other renesas updates

  There's also a couple of treewide commits from Masahiro Yamada
  cleaning up const/__initconst for SMP operation structs and a switch
  to using "depends on" instead of if-constructs on most of the Kconfig
  platform targets"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  staging: board: armadillo800eva: Use "arm,pl390"
  staging: board: kzm9d: Use "arm,pl390"
  ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC
  ARM: shmobile: emev2 dtsi: Use "arm,pl390" for GIC
  ARM: shmobile: r8a7740 dtsi: Use "arm,pl390" for GIC
  ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC
  ARM: use "depends on" for SoC configs instead of "if" after prompt
  ARM/clocksource: use automatic DT probing for ux500 PRCMU
  ARM: use const and __initconst for smp_operations
  ARM: hisi: do not export smp_operations structures
  ARM: mvebu: remove unused mach/gpio.h
  ARM: shmobile: Remove legacy mach/irqs.h
  ARM: shmobile: Introduce ARCH_RENESAS
  MAINTAINERS: Remove link to oss.renesas.com which is closed

MAINTAINERS

@@ -1532,7 +1532,6 @@ ARM/SHMOBILE ARM ARCHITECTURE
 M:	Simon Horman <horms@verge.net.au>
 M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-renesas-soc@vger.kernel.org
-W:	http://oss.renesas.com
 Q:	http://patchwork.kernel.org/project/linux-renesas-soc/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
 S:	Supported

arch/arm/Kconfig

@@ -806,7 +806,8 @@ config ARCH_MULTI_CPU_AUTO
 endmenu
 
 config ARCH_VIRT
-	bool "Dummy Virtual Machine" if ARCH_MULTI_V7
+	bool "Dummy Virtual Machine"
+	depends on ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_GIC_V2M if PCI_MSI

arch/arm/boot/dts/emev2.dtsi

@@ -44,7 +44,7 @@ cpu@1 {
 	};
 
 	gic: interrupt-controller@e0020000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		interrupt-controller;
 		#interrupt-cells = <3>;
 		reg = <0xe0028000 0x1000>,

arch/arm/boot/dts/r7s72100.dtsi

@@ -329,7 +329,7 @@ spi4: spi@e800e800 {
 	};
 
 	gic: interrupt-controller@e8201000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;

arch/arm/boot/dts/r8a7740.dtsi

@@ -30,7 +30,7 @@ cpu@0 {
 	};
 
 	gic: interrupt-controller@c2800000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0xc2800000 0x1000>,

arch/arm/boot/dts/r8a7778.dtsi

@@ -61,7 +61,7 @@ ether: ethernet@fde00000 {
 	};
 
 	gic: interrupt-controller@fe438000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0xfe438000 0x1000>,

arch/arm/common/mcpm_platsmp.c

@@ -83,7 +83,7 @@ static void mcpm_cpu_die(unsigned int cpu)
 
 #endif
 
-static struct smp_operations __initdata mcpm_smp_ops = {
+static const struct smp_operations mcpm_smp_ops __initconst = {
 	.smp_boot_secondary	= mcpm_boot_secondary,
 	.smp_secondary_init	= mcpm_secondary_init,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/configs/multi_v7_defconfig

@@ -75,7 +75,7 @@ CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_EXYNOS5420_MCPM=y
-CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_EMEV2=y
 CONFIG_ARCH_R7S72100=y
 CONFIG_ARCH_R8A73A4=y

arch/arm/configs/shmobile_defconfig

@@ -9,7 +9,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
-CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_EMEV2=y
 CONFIG_ARCH_R7S72100=y
 CONFIG_ARCH_R8A73A4=y

arch/arm/include/asm/psci.h

@@ -14,7 +14,7 @@
 #ifndef __ASM_ARM_PSCI_H
 #define __ASM_ARM_PSCI_H
 
-extern struct smp_operations psci_smp_ops;
+extern const struct smp_operations psci_smp_ops;
 
 #if defined(CONFIG_SMP) && defined(CONFIG_ARM_PSCI)
 bool psci_smp_available(void);

arch/arm/kernel/psci_smp.c

@@ -120,7 +120,7 @@ bool __init psci_smp_available(void)
 	return (psci_ops.cpu_on != NULL);
 }
 
-struct smp_operations __initdata psci_smp_ops = {
+const struct smp_operations psci_smp_ops __initconst = {
 	.smp_boot_secondary	= psci_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_disable		= psci_cpu_disable,

arch/arm/mach-alpine/Kconfig

 config ARCH_ALPINE
-	bool "Annapurna Labs Alpine platform" if ARCH_MULTI_V7
+	bool "Annapurna Labs Alpine platform"
+	depends on ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_GIC
 	select GENERIC_IRQ_CHIP

arch/arm/mach-alpine/platsmp.c

@@ -42,7 +42,7 @@ static void __init alpine_smp_prepare_cpus(unsigned int max_cpus)
 	alpine_cpu_pm_init();
 }
 
-static struct smp_operations alpine_smp_ops __initdata = {
+static const struct smp_operations alpine_smp_ops __initconst = {
 	.smp_prepare_cpus	= alpine_smp_prepare_cpus,
 	.smp_boot_secondary	= alpine_boot_secondary,
 };

arch/arm/mach-at91/Kconfig

@@ -8,7 +8,8 @@ menuconfig ARCH_AT91
 
 if ARCH_AT91
 config SOC_SAMA5D2
-	bool "SAMA5D2 family" if ARCH_MULTI_V7
+	bool "SAMA5D2 family"
+	depends on ARCH_MULTI_V7
 	select SOC_SAMA5
 	select CACHE_L2X0
 	select HAVE_FB_ATMEL
@@ -21,7 +22,8 @@ config SOC_SAMA5D2
 	  Select this if ou are using one of Atmel's SAMA5D2 family SoC.
 
 config SOC_SAMA5D3
-	bool "SAMA5D3 family" if ARCH_MULTI_V7
+	bool "SAMA5D3 family"
+	depends on ARCH_MULTI_V7
 	select SOC_SAMA5
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_UTMI
@@ -33,7 +35,8 @@ config SOC_SAMA5D3
 	  This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
 
 config SOC_SAMA5D4
-	bool "SAMA5D4 family" if ARCH_MULTI_V7
+	bool "SAMA5D4 family"
+	depends on ARCH_MULTI_V7
 	select SOC_SAMA5
 	select CACHE_L2X0
 	select HAVE_FB_ATMEL
@@ -46,7 +49,8 @@ config SOC_SAMA5D4
 	  Select this if you are using one of Atmel's SAMA5D4 family SoC.
 
 config SOC_AT91RM9200
-	bool "AT91RM9200" if ARCH_MULTI_V4T
+	bool "AT91RM9200"
+	depends on ARCH_MULTI_V4T
 	select ATMEL_AIC_IRQ
 	select ATMEL_ST
 	select CPU_ARM920T
@@ -59,7 +63,8 @@ config SOC_AT91RM9200
 	  Select this if you are using Atmel's AT91RM9200 SoC.
 
 config SOC_AT91SAM9
-	bool "AT91SAM9" if ARCH_MULTI_V5
+	bool "AT91SAM9"
+	depends on ARCH_MULTI_V5
 	select ATMEL_AIC_IRQ
 	select ATMEL_SDRAMC
 	select CPU_ARM926T

arch/arm/mach-axxia/Kconfig

 config ARCH_AXXIA
-	bool "LSI Axxia platforms" if (ARCH_MULTI_V7 && ARM_LPAE)
+	bool "LSI Axxia platforms"
+	depends on ARCH_MULTI_V7 && ARM_LPAE
 	select ARCH_DMA_ADDR_T_64BIT
 	select ARM_AMBA
 	select ARM_GIC

arch/arm/mach-axxia/platsmp.c

@@ -82,7 +82,7 @@ static void __init axxia_smp_prepare_cpus(unsigned int max_cpus)
 	}
 }
 
-static struct smp_operations axxia_smp_ops __initdata = {
+static const struct smp_operations axxia_smp_ops __initconst = {
 	.smp_prepare_cpus	= axxia_smp_prepare_cpus,
 	.smp_boot_secondary	= axxia_boot_secondary,
 };

arch/arm/mach-bcm/Kconfig

 menuconfig ARCH_BCM
-	bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7
+	bool "Broadcom SoC Support"
+	depends on ARCH_MULTI_V6_V7
 	help
 	  This enables support for Broadcom ARM based SoC chips
 
@@ -27,7 +28,8 @@ config ARCH_BCM_IPROC
 	  Currently supported SoCs are Cygnus.
 
 config ARCH_BCM_CYGNUS
-	bool "Broadcom Cygnus Support" if ARCH_MULTI_V7
+	bool "Broadcom Cygnus Support"
+	depends on ARCH_MULTI_V7
 	select ARCH_BCM_IPROC
 	help
 	  Enable support for the Cygnus family,
@@ -36,7 +38,8 @@ config ARCH_BCM_CYGNUS
 	  BCM58300, BCM58302, BCM58303, BCM58305.
 
 config ARCH_BCM_NSP
-	bool "Broadcom Northstar Plus SoC Support" if ARCH_MULTI_V7
+	bool "Broadcom Northstar Plus SoC Support"
+	depends on ARCH_MULTI_V7
 	select ARCH_BCM_IPROC
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
@@ -50,7 +53,8 @@ config ARCH_BCM_NSP
 	  NAND flash, SATA and several other IO controllers.
 
 config ARCH_BCM_5301X
-	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+	bool "Broadcom BCM470X / BCM5301X ARM SoC"
+	depends on ARCH_MULTI_V7
 	select ARCH_BCM_IPROC
 	help
 	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
@@ -82,7 +86,8 @@ config ARCH_BCM_MOBILE
 	  This enables support for systems based on Broadcom mobile SoCs.
 
 config ARCH_BCM_281XX
-	bool "Broadcom BCM281XX SoC family" if ARCH_MULTI_V7
+	bool "Broadcom BCM281XX SoC family"
+	depends on ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
 	select HAVE_SMP
 	help
@@ -91,7 +96,8 @@ config ARCH_BCM_281XX
 	  variants.
 
 config ARCH_BCM_21664
-	bool "Broadcom BCM21664 SoC family" if ARCH_MULTI_V7
+	bool "Broadcom BCM21664 SoC family"
+	depends on ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
 	select HAVE_SMP
 	help
@@ -122,7 +128,8 @@ config ARCH_BCM_MOBILE_SMP
 comment "Other Architectures"
 
 config ARCH_BCM2835
-	bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
+	bool "Broadcom BCM2835 family"
+	depends on ARCH_MULTI_V6
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_411920
@@ -135,7 +142,8 @@ config ARCH_BCM2835
 	  used in the Raspberry Pi and Roku 2 devices.
 
 config ARCH_BCM_63XX
-	bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7
+	bool "Broadcom BCM63xx DSL SoC"
+	depends on ARCH_MULTI_V7
 	depends on MMU
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
@@ -152,7 +160,8 @@ config ARCH_BCM_63XX
 	  the BCM63138 variant.
 
 config ARCH_BRCMSTB
-	bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
+	bool "Broadcom BCM7XXX based boards"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER

arch/arm/mach-bcm/bcm63xx_smp.c

@@ -161,7 +161,7 @@ static void __init bcm63138_smp_prepare_cpus(unsigned int max_cpus)
 	}
 }
 
-struct smp_operations bcm63138_smp_ops __initdata = {
+static const struct smp_operations bcm63138_smp_ops __initconst = {
 	.smp_prepare_cpus	= bcm63138_smp_prepare_cpus,
 	.smp_boot_secondary	= bcm63138_smp_boot_secondary,
 };

arch/arm/mach-bcm/kona_smp.c

@@ -194,7 +194,7 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return -ENOSYS;
 }
 
-static struct smp_operations bcm_smp_ops __initdata = {
+static const struct smp_operations bcm_smp_ops __initconst = {
 	.smp_prepare_cpus	= bcm_smp_prepare_cpus,
 	.smp_boot_secondary	= bcm_boot_secondary,
 };

arch/arm/mach-bcm/platsmp-brcmstb.c

@@ -356,7 +356,7 @@ static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-static struct smp_operations brcmstb_smp_ops __initdata = {
+static const struct smp_operations brcmstb_smp_ops __initconst = {
 	.smp_prepare_cpus	= brcmstb_cpu_ctrl_setup,
 	.smp_boot_secondary	= brcmstb_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/mach-berlin/Kconfig

 menuconfig ARCH_BERLIN
-	bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
+	bool "Marvell Berlin SoCs"
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC

arch/arm/mach-berlin/platsmp.c

@@ -119,7 +119,7 @@ static int berlin_cpu_kill(unsigned int cpu)
 }
 #endif
 
-static struct smp_operations berlin_smp_ops __initdata = {
+static const struct smp_operations berlin_smp_ops __initconst = {
 	.smp_prepare_cpus	= berlin_smp_prepare_cpus,
 	.smp_boot_secondary	= berlin_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/mach-cns3xxx/Kconfig

 menuconfig ARCH_CNS3XXX
-	bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
+	bool "Cavium Networks CNS3XXX family"
+	depends on ARCH_MULTI_V6
 	select ARM_GIC
 	select PCI_DOMAINS if PCI
 	help

arch/arm/mach-exynos/Kconfig

@@ -8,7 +8,8 @@
 # Configuration options for the EXYNOS4
 
 menuconfig ARCH_EXYNOS
-	bool "Samsung EXYNOS" if ARCH_MULTI_V7
+	bool "Samsung EXYNOS"
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_REQUIRE_GPIOLIB

arch/arm/mach-exynos/common.h

@@ -149,7 +149,7 @@ static inline void exynos_pm_init(void) {}
 extern void exynos_cpu_resume(void);
 extern void exynos_cpu_resume_ns(void);
 
-extern struct smp_operations exynos_smp_ops;
+extern const struct smp_operations exynos_smp_ops;
 
 extern void exynos_cpu_power_down(int cpu);
 extern void exynos_cpu_power_up(int cpu);

arch/arm/mach-exynos/platsmp.c

@@ -479,7 +479,7 @@ static void exynos_cpu_die(unsigned int cpu)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-struct smp_operations exynos_smp_ops __initdata = {
+const struct smp_operations exynos_smp_ops __initconst = {
 	.smp_init_cpus		= exynos_smp_init_cpus,
 	.smp_prepare_cpus	= exynos_smp_prepare_cpus,
 	.smp_secondary_init	= exynos_secondary_init,

arch/arm/mach-highbank/Kconfig

 config ARCH_HIGHBANK
-	bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
+	bool "Calxeda ECX-1000/2000 (Highbank/Midway)"
+	depends on ARCH_MULTI_V7
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SUPPORTS_BIG_ENDIAN

arch/arm/mach-hisi/Kconfig

@@ -13,7 +13,8 @@ if ARCH_HISI
 menu "Hisilicon platform type"
 
 config ARCH_HI3xxx
-	bool "Hisilicon Hi36xx family" if ARCH_MULTI_V7
+	bool "Hisilicon Hi36xx family"
+	depends on ARCH_MULTI_V7
 	select CACHE_L2X0
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
@@ -23,7 +24,8 @@ config ARCH_HI3xxx
 	  Support for Hisilicon Hi36xx SoC family
 
 config ARCH_HIP01
-       bool "Hisilicon HIP01 family" if ARCH_MULTI_V7
+       bool "Hisilicon HIP01 family"
+       depends on ARCH_MULTI_V7
        select HAVE_ARM_SCU if SMP
        select HAVE_ARM_TWD if SMP
        select ARM_GLOBAL_TIMER
@@ -31,7 +33,8 @@ config ARCH_HIP01
          Support for Hisilicon HIP01 SoC family
 
 config ARCH_HIP04
-	bool "Hisilicon HiP04 Cortex A15 family" if ARCH_MULTI_V7
+	bool "Hisilicon HiP04 Cortex A15 family"
+	depends on ARCH_MULTI_V7
 	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
 	select MCPM if SMP
@@ -40,7 +43,8 @@ config ARCH_HIP04
 	  Support for Hisilicon HiP04 SoC family
 
 config ARCH_HIX5HD2
-	bool "Hisilicon X5HD2 family" if ARCH_MULTI_V7
+	bool "Hisilicon X5HD2 family"
+	depends on ARCH_MULTI_V7
 	select CACHE_L2X0
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP

arch/arm/mach-hisi/core.h

@@ -6,17 +6,14 @@
 extern void hi3xxx_set_cpu_jump(int cpu, void *jump_addr);
 extern int hi3xxx_get_cpu_jump(int cpu);
 extern void secondary_startup(void);
-extern struct smp_operations hi3xxx_smp_ops;
 
 extern void hi3xxx_cpu_die(unsigned int cpu);
 extern int hi3xxx_cpu_kill(unsigned int cpu);
 extern void hi3xxx_set_cpu(int cpu, bool enable);
 
-extern struct smp_operations hix5hd2_smp_ops;
 extern void hix5hd2_set_cpu(int cpu, bool enable);
 extern void hix5hd2_cpu_die(unsigned int cpu);
 
-extern struct smp_operations hip01_smp_ops;
 extern void hip01_set_cpu(int cpu, bool enable);
 extern void hip01_cpu_die(unsigned int cpu);
 #endif

arch/arm/mach-hisi/platmcpm.c

@@ -239,7 +239,7 @@ static int hip04_cpu_kill(unsigned int l_cpu)
 }
 #endif
 
-static struct smp_operations __initdata hip04_smp_ops = {
+static const struct smp_operations hip04_smp_ops __initconst = {
 	.smp_boot_secondary	= hip04_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= hip04_cpu_die,

arch/arm/mach-hisi/platsmp.c

@@ -89,7 +89,7 @@ static int hi3xxx_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-struct smp_operations hi3xxx_smp_ops __initdata = {
+static const struct smp_operations hi3xxx_smp_ops __initconst = {
 	.smp_prepare_cpus	= hi3xxx_smp_prepare_cpus,
 	.smp_boot_secondary	= hi3xxx_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
@@ -126,7 +126,7 @@ static int hix5hd2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 }
 
 
-struct smp_operations hix5hd2_smp_ops __initdata = {
+static const struct smp_operations hix5hd2_smp_ops __initconst = {
 	.smp_prepare_cpus	= hisi_common_smp_prepare_cpus,
 	.smp_boot_secondary	= hix5hd2_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
@@ -176,7 +176,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-struct smp_operations hip01_smp_ops __initdata = {
+static const struct smp_operations hip01_smp_ops __initconst = {
 	.smp_prepare_cpus       = hisi_common_smp_prepare_cpus,
 	.smp_boot_secondary     = hip01_boot_secondary,
 };

arch/arm/mach-imx/Kconfig

 menuconfig ARCH_MXC
-	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
+	bool "Freescale i.MX family"
+	depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
 	select CLKSRC_IMX_GPT
@@ -596,7 +597,8 @@ choice
 	default VF_USE_ARM_GLOBAL_TIMER
 
 	config VF_USE_ARM_GLOBAL_TIMER
-		bool "Use ARM Global Timer" if ARCH_MULTI_V7
+		bool "Use ARM Global Timer"
+		depends on ARCH_MULTI_V7
 		select ARM_GLOBAL_TIMER
 		select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 		help

arch/arm/mach-imx/common.h

@@ -153,7 +153,7 @@ void imx_init_l2cache(void);
 static inline void imx_init_l2cache(void) {}
 #endif
 
-extern struct smp_operations imx_smp_ops;
-extern struct smp_operations ls1021a_smp_ops;
+extern const struct smp_operations imx_smp_ops;
+extern const struct smp_operations ls1021a_smp_ops;
 
 #endif

arch/arm/mach-imx/platsmp.c

@@ -88,7 +88,7 @@ static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
 	sync_cache_w(&g_diag_reg);
 }
 
-struct smp_operations  imx_smp_ops __initdata = {
+const struct smp_operations imx_smp_ops __initconst = {
 	.smp_init_cpus		= imx_smp_init_cpus,
 	.smp_prepare_cpus	= imx_smp_prepare_cpus,
 	.smp_boot_secondary	= imx_boot_secondary,
@@ -123,7 +123,7 @@ static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus)
 	iounmap(dcfg_base);
 }
 
-struct smp_operations  ls1021a_smp_ops __initdata = {
+const struct smp_operations ls1021a_smp_ops __initconst = {
 	.smp_prepare_cpus	= ls1021a_smp_prepare_cpus,
 	.smp_boot_secondary	= ls1021a_boot_secondary,
 };

arch/arm/mach-integrator/Kconfig

 config ARCH_INTEGRATOR
-	bool "ARM Ltd. Integrator family" if (ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6)
+	bool "ARM Ltd. Integrator family"
+	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT if MMU
 	select AUTO_ZRELADDR

arch/arm/mach-keystone/keystone.h

@@ -15,7 +15,7 @@
 
 #ifndef __ASSEMBLER__
 
-extern struct smp_operations keystone_smp_ops;
+extern const struct smp_operations keystone_smp_ops;
 extern void secondary_startup(void);
 extern u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr);
 extern int keystone_pm_runtime_init(void);

arch/arm/mach-keystone/platsmp.c

@@ -39,6 +39,6 @@ static int keystone_smp_boot_secondary(unsigned int cpu,
 	return error;
 }
 
-struct smp_operations keystone_smp_ops __initdata = {
+const struct smp_operations keystone_smp_ops __initconst = {
 	.smp_boot_secondary	= keystone_smp_boot_secondary,
 };

arch/arm/mach-mediatek/Kconfig

 menuconfig ARCH_MEDIATEK
-	bool "Mediatek MT65xx & MT81xx SoC" if ARCH_MULTI_V7
+	bool "Mediatek MT65xx & MT81xx SoC"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select PINCTRL
 	select MTK_TIMER

arch/arm/mach-mediatek/platsmp.c

@@ -128,13 +128,13 @@ static void __init mtk_smp_prepare_cpus(unsigned int max_cpus)
 	__mtk_smp_prepare_cpus(max_cpus, 0);
 }
 
-static struct smp_operations mt81xx_tz_smp_ops __initdata = {
+static const struct smp_operations mt81xx_tz_smp_ops __initconst = {
 	.smp_prepare_cpus = mtk_tz_smp_prepare_cpus,
 	.smp_boot_secondary = mtk_boot_secondary,
 };
 CPU_METHOD_OF_DECLARE(mt81xx_tz_smp, "mediatek,mt81xx-tz-smp", &mt81xx_tz_smp_ops);
 
-static struct smp_operations mt6589_smp_ops __initdata = {
+static const struct smp_operations mt6589_smp_ops __initconst = {
 	.smp_prepare_cpus = mtk_smp_prepare_cpus,
 	.smp_boot_secondary = mtk_boot_secondary,
 };

arch/arm/mach-meson/Kconfig

 menuconfig ARCH_MESON
-	bool "Amlogic Meson SoCs" if ARCH_MULTI_V7
+	bool "Amlogic Meson SoCs"
+	depends on ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_IRQ_CHIP
 	select ARM_GIC

arch/arm/mach-moxart/Kconfig

 menuconfig ARCH_MOXART
-	bool "MOXA ART SoC" if ARCH_MULTI_V4
+	bool "MOXA ART SoC"
+	depends on ARCH_MULTI_V4
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
 	select CLKSRC_MMIO

arch/arm/mach-mvebu/Kconfig

 menuconfig ARCH_MVEBU
-	bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
+	bool "Marvell Engineering Business Unit (MVEBU) SoCs"
+	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
@@ -25,7 +26,8 @@ config MACH_MVEBU_V7
 	select MACH_MVEBU_ANY
 
 config MACH_ARMADA_370
-	bool "Marvell Armada 370 boards" if ARCH_MULTI_V7
+	bool "Marvell Armada 370 boards"
+	depends on ARCH_MULTI_V7
 	select ARMADA_370_CLK
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
@@ -35,7 +37,8 @@ config MACH_ARMADA_370
 	  on the Marvell Armada 370 SoC with device tree.
 
 config MACH_ARMADA_375
-	bool "Marvell Armada 375 boards" if ARCH_MULTI_V7
+	bool "Marvell Armada 375 boards"
+	depends on ARCH_MULTI_V7
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
@@ -50,7 +53,8 @@ config MACH_ARMADA_375
 	  on the Marvell Armada 375 SoC with device tree.
 
 config MACH_ARMADA_38X
-	bool "Marvell Armada 380/385 boards" if ARCH_MULTI_V7
+	bool "Marvell Armada 380/385 boards"
+	depends on ARCH_MULTI_V7
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
@@ -65,7 +69,8 @@ config MACH_ARMADA_38X
 	  on the Marvell Armada 380/385 SoC with device tree.
 
 config MACH_ARMADA_39X
-	bool "Marvell Armada 39x boards" if ARCH_MULTI_V7
+	bool "Marvell Armada 39x boards"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select ARMADA_39X_CLK
 	select CACHE_L2X0
@@ -79,7 +84,8 @@ config MACH_ARMADA_39X
 	  on the Marvell Armada 39x SoC with device tree.
 
 config MACH_ARMADA_XP
-	bool "Marvell Armada XP boards" if ARCH_MULTI_V7
+	bool "Marvell Armada XP boards"
+	depends on ARCH_MULTI_V7
 	select ARMADA_XP_CLK
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
@@ -89,7 +95,8 @@ config MACH_ARMADA_XP
 	  on the Marvell Armada XP SoC with device tree.
 
 config MACH_DOVE
-	bool "Marvell Dove boards" if ARCH_MULTI_V7
+	bool "Marvell Dove boards"
+	depends on ARCH_MULTI_V7
 	select CACHE_L2X0
 	select CPU_PJ4
 	select DOVE_CLK
@@ -103,7 +110,8 @@ config MACH_DOVE
 	  Marvell Dove using flattened device tree.
 
 config MACH_KIRKWOOD
-	bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
+	bool "Marvell Kirkwood boards"
+	depends on ARCH_MULTI_V5
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select KIRKWOOD_CLK

arch/arm/mach-mvebu/armada-370-xp.h

@@ -17,7 +17,7 @@
 
 #ifdef CONFIG_SMP
 void armada_xp_secondary_startup(void);
-extern struct smp_operations armada_xp_smp_ops;
+extern const struct smp_operations armada_xp_smp_ops;
 #endif
 
 #endif /* __MACH_ARMADA_370_XP_H */

arch/arm/mach-mvebu/include/mach/gpio.h

-/* empty */

arch/arm/mach-mvebu/platsmp-a9.c

@@ -93,11 +93,11 @@ static int armada_38x_cpu_kill(unsigned int cpu)
 }
 #endif
 
-static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = {
+static const struct smp_operations mvebu_cortex_a9_smp_ops __initconst = {
 	.smp_boot_secondary	= mvebu_cortex_a9_boot_secondary,
 };
 
-static struct smp_operations armada_38x_smp_ops __initdata = {
+static const struct smp_operations armada_38x_smp_ops __initconst = {
 	.smp_boot_secondary	= mvebu_cortex_a9_boot_secondary,
 	.smp_secondary_init     = armada_38x_secondary_init,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/mach-mvebu/platsmp.c

@@ -170,7 +170,7 @@ static int armada_xp_cpu_kill(unsigned int cpu)
 }
 #endif
 
-struct smp_operations armada_xp_smp_ops __initdata = {
+const struct smp_operations armada_xp_smp_ops __initconst = {
 	.smp_init_cpus		= armada_xp_smp_init_cpus,
 	.smp_prepare_cpus	= armada_xp_smp_prepare_cpus,
 	.smp_boot_secondary	= armada_xp_boot_secondary,

arch/arm/mach-omap2/common.h

@@ -270,7 +270,7 @@ extern u32 omap_read_auxcoreboot0(void);
 
 extern void omap4_cpu_die(unsigned int cpu);
 
-extern struct smp_operations omap4_smp_ops;
+extern const struct smp_operations omap4_smp_ops;
 
 extern void omap5_secondary_startup(void);
 extern void omap5_secondary_hyp_startup(void);

arch/arm/mach-omap2/omap-smp.c

@@ -241,7 +241,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 
 }
 
-struct smp_operations omap4_smp_ops __initdata = {
+const struct smp_operations omap4_smp_ops __initconst = {
 	.smp_init_cpus		= omap4_smp_init_cpus,
 	.smp_prepare_cpus	= omap4_smp_prepare_cpus,
 	.smp_secondary_init	= omap4_secondary_init,

arch/arm/mach-picoxcell/Kconfig

 config ARCH_PICOXCELL
-	bool "Picochip PicoXcell" if ARCH_MULTI_V6
+	bool "Picochip PicoXcell"
+	depends on ARCH_MULTI_V6
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
 	select DW_APB_TIMER_OF

arch/arm/mach-prima2/Kconfig

 menuconfig ARCH_SIRF
-	bool "CSR SiRF" if ARCH_MULTI_V7
+	bool "CSR SiRF"
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_IRQ_CHIP

arch/arm/mach-prima2/common.h

@@ -15,7 +15,7 @@
 #include <asm/mach/time.h>
 #include <asm/exception.h>
 
-extern struct smp_operations   sirfsoc_smp_ops;
+extern const struct smp_operations sirfsoc_smp_ops;
 extern void sirfsoc_secondary_startup(void);
 extern void sirfsoc_cpu_die(unsigned int cpu);
 

arch/arm/mach-prima2/platsmp.c

@@ -112,7 +112,7 @@ static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return pen_release != -1 ? -ENOSYS : 0;
 }
 
-struct smp_operations sirfsoc_smp_ops __initdata = {
+const struct smp_operations sirfsoc_smp_ops __initconst = {
 	.smp_secondary_init     = sirfsoc_secondary_init,
 	.smp_boot_secondary     = sirfsoc_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/mach-qcom/Kconfig

 menuconfig ARCH_QCOM
-	bool "Qualcomm Support" if ARCH_MULTI_V7
+	bool "Qualcomm Support"
+	depends on ARCH_MULTI_V7
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_GIC
 	select ARM_AMBA

arch/arm/mach-qcom/platsmp.c

@@ -332,7 +332,7 @@ static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
 	}
 }
 
-static struct smp_operations smp_msm8660_ops __initdata = {
+static const struct smp_operations smp_msm8660_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_secondary_init	= qcom_secondary_init,
 	.smp_boot_secondary	= msm8660_boot_secondary,
@@ -342,7 +342,7 @@ static struct smp_operations smp_msm8660_ops __initdata = {
 };
 CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
 
-static struct smp_operations qcom_smp_kpssv1_ops __initdata = {
+static const struct smp_operations qcom_smp_kpssv1_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_secondary_init	= qcom_secondary_init,
 	.smp_boot_secondary	= kpssv1_boot_secondary,
@@ -352,7 +352,7 @@ static struct smp_operations qcom_smp_kpssv1_ops __initdata = {
 };
 CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops);
 
-static struct smp_operations qcom_smp_kpssv2_ops __initdata = {
+static const struct smp_operations qcom_smp_kpssv2_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_secondary_init	= qcom_secondary_init,
 	.smp_boot_secondary	= kpssv2_boot_secondary,

arch/arm/mach-realview/core.h

@@ -54,7 +54,7 @@ extern int realview_usb_register(struct resource *res);
 extern void realview_init_early(void);
 extern void realview_fixup(struct tag *tags, char **from);
 
-extern struct smp_operations realview_smp_ops;
+extern const struct smp_operations realview_smp_ops;
 extern void realview_cpu_die(unsigned int cpu);
 
 #endif

arch/arm/mach-realview/platsmp.c

@@ -75,7 +75,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
 		     __io_address(REALVIEW_SYS_FLAGSSET));
 }
 
-struct smp_operations realview_smp_ops __initdata = {
+const struct smp_operations realview_smp_ops __initconst = {
 	.smp_init_cpus		= realview_smp_init_cpus,
 	.smp_prepare_cpus	= realview_smp_prepare_cpus,
 	.smp_secondary_init	= versatile_secondary_init,

arch/arm/mach-rockchip/Kconfig

 config ARCH_ROCKCHIP
-	bool "Rockchip RK2928 and RK3xxx SOCs" if ARCH_MULTI_V7
+	bool "Rockchip RK2928 and RK3xxx SOCs"
+	depends on ARCH_MULTI_V7
 	select PINCTRL
 	select PINCTRL_ROCKCHIP
 	select ARCH_HAS_RESET_CONTROLLER

arch/arm/mach-rockchip/platsmp.c

@@ -340,7 +340,7 @@ static void rockchip_cpu_die(unsigned int cpu)
 }
 #endif
 
-static struct smp_operations rockchip_smp_ops __initdata = {
+static const struct smp_operations rockchip_smp_ops __initconst = {
 	.smp_prepare_cpus	= rockchip_smp_prepare_cpus,
 	.smp_boot_secondary	= rockchip_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/mach-s5pv210/Kconfig

@@ -8,7 +8,8 @@
 # Configuration options for the S5PV210/S5PC110
 
 config ARCH_S5PV210
-	bool "Samsung S5PV210/S5PC110" if ARCH_MULTI_V7
+	bool "Samsung S5PV210/S5PC110"
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC

arch/arm/mach-shmobile/Kconfig

 config ARCH_SHMOBILE
 	bool
-	select ZONE_DMA if ARM_LPAE
+
+config ARCH_SHMOBILE_MULTI
+	bool
 
 config PM_RCAR
 	bool
@@ -29,10 +31,11 @@ config ARCH_RMOBILE
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_TMU
 
-menuconfig ARCH_SHMOBILE_MULTI
-	bool "Renesas ARM SoCs" if ARCH_MULTI_V7
-	depends on MMU
+menuconfig ARCH_RENESAS
+	bool "Renesas ARM SoCs"
+	depends on ARCH_MULTI_V7 && MMU
 	select ARCH_SHMOBILE
+	select ARCH_SHMOBILE_MULTI
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select ARM_GIC
@@ -40,8 +43,9 @@ menuconfig ARCH_SHMOBILE_MULTI
 	select NO_IOPORT_MAP
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
+	select ZONE_DMA if ARM_LPAE
 
-if ARCH_SHMOBILE_MULTI
+if ARCH_RENESAS
 
 #comment "Renesas ARM SoCs System Type"
 

arch/arm/mach-shmobile/include/mach/irqs.h

-#ifndef __ASM_MACH_IRQS_H
-#define __ASM_MACH_IRQS_H
-
-/* Stuck here until drivers/pinctl/sh-pfc gets rid of legacy code */
-
-/* External IRQ pins */
-#define IRQPIN_BASE		2000
-#define irq_pin(nr)		((nr) + IRQPIN_BASE)
-
-#endif /* __ASM_MACH_IRQS_H */

arch/arm/mach-shmobile/irqs.h

-#ifndef __SHMOBILE_IRQS_H
-#define __SHMOBILE_IRQS_H
-
-#include "include/mach/irqs.h"
-
-/* GIC */
-#define gic_spi(nr)		((nr) + 32)
-#define gic_iid(nr)		(nr) /* ICCIAR / interrupt ID */
-
-/* GPIO IRQ */
-#define _GPIO_IRQ_BASE		2500
-#define GPIO_IRQ_BASE(x)	(_GPIO_IRQ_BASE + (32 * x))
-#define GPIO_IRQ(x, y)		(_GPIO_IRQ_BASE + (32 * x) + y)
-
-#endif /* __SHMOBILE_IRQS_H */

arch/arm/mach-shmobile/r8a7779.h

@@ -3,6 +3,6 @@
 
 extern void r8a7779_pm_init(void);
 
-extern struct smp_operations r8a7779_smp_ops;
+extern const struct smp_operations r8a7779_smp_ops;
 
 #endif /* __ASM_R8A7779_H__ */

arch/arm/mach-shmobile/r8a7790.h

 #ifndef __ASM_R8A7790_H__
 #define __ASM_R8A7790_H__
 
-extern struct smp_operations r8a7790_smp_ops;
+extern const struct smp_operations r8a7790_smp_ops;
 
 #endif /* __ASM_R8A7790_H__ */

arch/arm/mach-shmobile/r8a7791.h

 #ifndef __ASM_R8A7791_H__
 #define __ASM_R8A7791_H__
 
-extern struct smp_operations r8a7791_smp_ops;
+extern const struct smp_operations r8a7791_smp_ops;
 
 #endif /* __ASM_R8A7791_H__ */

arch/arm/mach-shmobile/setup-emev2.c

@@ -42,7 +42,7 @@ static const char *const emev2_boards_compat_dt[] __initconst = {
 	NULL,
 };
 
-extern struct smp_operations emev2_smp_ops;
+extern const struct smp_operations emev2_smp_ops;
 
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),

arch/arm/mach-shmobile/setup-r8a7778.c

@@ -22,7 +22,6 @@
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include "irqs.h"
 
 #define MODEMR 0xffcc0020
 

arch/arm/mach-shmobile/sh73a0.h

 #ifndef __ASM_SH73A0_H__
 #define __ASM_SH73A0_H__
 
-extern struct smp_operations sh73a0_smp_ops;
+extern const struct smp_operations sh73a0_smp_ops;
 
 #endif /* __ASM_SH73A0_H__ */

arch/arm/mach-shmobile/smp-emev2.c

@@ -49,7 +49,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 	shmobile_smp_scu_prepare_cpus(max_cpus);
 }
 
-struct smp_operations emev2_smp_ops __initdata = {
+const struct smp_operations emev2_smp_ops __initconst = {
 	.smp_prepare_cpus	= emev2_smp_prepare_cpus,
 	.smp_boot_secondary	= emev2_boot_secondary,
 };

arch/arm/mach-shmobile/smp-r8a7779.c

@@ -117,7 +117,7 @@ static int r8a7779_cpu_kill(unsigned int cpu)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-struct smp_operations r8a7779_smp_ops  __initdata = {
+const struct smp_operations r8a7779_smp_ops  __initconst = {
 	.smp_prepare_cpus	= r8a7779_smp_prepare_cpus,
 	.smp_boot_secondary	= r8a7779_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/mach-shmobile/smp-r8a7790.c

@@ -60,7 +60,7 @@ static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
 	rcar_sysc_power_up(&r8a7790_ca7_scu);
 }
 
-struct smp_operations r8a7790_smp_ops __initdata = {
+const struct smp_operations r8a7790_smp_ops __initconst = {
 	.smp_prepare_cpus	= r8a7790_smp_prepare_cpus,
 	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/mach-shmobile/smp-r8a7791.c

@@ -54,7 +54,7 @@ static int r8a7791_smp_boot_secondary(unsigned int cpu,
 	return shmobile_smp_apmu_boot_secondary(cpu, idle);
 }
 
-struct smp_operations r8a7791_smp_ops __initdata = {
+const struct smp_operations r8a7791_smp_ops __initconst = {
 	.smp_prepare_cpus	= r8a7791_smp_prepare_cpus,
 	.smp_boot_secondary	= r8a7791_smp_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/mach-shmobile/smp-sh73a0.c

@@ -56,7 +56,7 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 	shmobile_smp_scu_prepare_cpus(max_cpus);
 }
 
-struct smp_operations sh73a0_smp_ops __initdata = {
+const struct smp_operations sh73a0_smp_ops __initconst = {
 	.smp_prepare_cpus	= sh73a0_smp_prepare_cpus,
 	.smp_boot_secondary	= sh73a0_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/mach-socfpga/Kconfig

 menuconfig ARCH_SOCFPGA
-	bool "Altera SOCFPGA family" if ARCH_MULTI_V7
+	bool "Altera SOCFPGA family"
+	depends on ARCH_MULTI_V7
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC

arch/arm/mach-socfpga/platsmp.c

@@ -117,7 +117,7 @@ static int socfpga_cpu_kill(unsigned int cpu)
 	return 1;
 }
 
-static struct smp_operations socfpga_smp_ops __initdata = {
+static const struct smp_operations socfpga_smp_ops __initconst = {
 	.smp_prepare_cpus	= socfpga_smp_prepare_cpus,
 	.smp_boot_secondary	= socfpga_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
@@ -126,7 +126,7 @@ static struct smp_operations socfpga_smp_ops __initdata = {
 #endif
 };
 
-static struct smp_operations socfpga_a10_smp_ops __initdata = {
+static const struct smp_operations socfpga_a10_smp_ops __initconst = {
 	.smp_prepare_cpus	= socfpga_smp_prepare_cpus,
 	.smp_boot_secondary	= socfpga_a10_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/mach-spear/Kconfig

@@ -3,7 +3,8 @@
 #
 
 menuconfig PLAT_SPEAR
-	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
+	bool "ST SPEAr Family"
+	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKSRC_MMIO

arch/arm/mach-spear/generic.h

@@ -39,7 +39,7 @@ void spear_restart(enum reboot_mode, const char *);
 void spear13xx_secondary_startup(void);
 void spear13xx_cpu_die(unsigned int cpu);
 
-extern struct smp_operations spear13xx_smp_ops;
+extern const struct smp_operations spear13xx_smp_ops;
 
 #ifdef CONFIG_MACH_SPEAR1310
 void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base);

arch/arm/mach-spear/platsmp.c

@@ -120,7 +120,7 @@ static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
 	__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
 }
 
-struct smp_operations spear13xx_smp_ops __initdata = {
+const struct smp_operations spear13xx_smp_ops __initconst = {
        .smp_init_cpus		= spear13xx_smp_init_cpus,
        .smp_prepare_cpus	= spear13xx_smp_prepare_cpus,
        .smp_secondary_init	= spear13xx_secondary_init,

arch/arm/mach-sti/Kconfig

 menuconfig ARCH_STI
-	bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7
+	bool "STMicroelectronics Consumer Electronics SOCs"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select ST_IRQCHIP
 	select ARM_GLOBAL_TIMER

arch/arm/mach-sti/platsmp.c

@@ -156,7 +156,7 @@ static void __init sti_smp_prepare_cpus(unsigned int max_cpus)
 	}
 }
 
-struct smp_operations __initdata sti_smp_ops = {
+const struct smp_operations sti_smp_ops __initconst = {
 	.smp_prepare_cpus	= sti_smp_prepare_cpus,
 	.smp_secondary_init	= sti_secondary_init,
 	.smp_boot_secondary	= sti_boot_secondary,

arch/arm/mach-sti/smp.h

@@ -12,7 +12,7 @@
 #ifndef __MACH_STI_SMP_H
 #define __MACH_STI_SMP_H
 
-extern struct smp_operations	sti_smp_ops;
+extern const struct smp_operations sti_smp_ops;
 
 void sti_secondary_startup(void);
 

arch/arm/mach-sunxi/Kconfig

 menuconfig ARCH_SUNXI
-	bool "Allwinner SoCs" if ARCH_MULTI_V7
+	bool "Allwinner SoCs"
+	depends on ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_RESET_CONTROLLER
 	select CLKSRC_MMIO

arch/arm/mach-sunxi/platsmp.c

@@ -116,7 +116,7 @@ static int sun6i_smp_boot_secondary(unsigned int cpu,
 	return 0;
 }
 
-static struct smp_operations sun6i_smp_ops __initdata = {
+static const struct smp_operations sun6i_smp_ops __initconst = {
 	.smp_prepare_cpus	= sun6i_smp_prepare_cpus,
 	.smp_boot_secondary	= sun6i_smp_boot_secondary,
 };
@@ -185,7 +185,7 @@ static int sun8i_smp_boot_secondary(unsigned int cpu,
 	return 0;
 }
 
-struct smp_operations sun8i_smp_ops __initdata = {
+static const struct smp_operations sun8i_smp_ops __initconst = {
 	.smp_prepare_cpus	= sun8i_smp_prepare_cpus,
 	.smp_boot_secondary	= sun8i_smp_boot_secondary,
 };

arch/arm/mach-tegra/Kconfig

 menuconfig ARCH_TEGRA
-	bool "NVIDIA Tegra" if ARCH_MULTI_V7
+	bool "NVIDIA Tegra"
+	depends on ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
 	select ARM_AMBA

arch/arm/mach-tegra/common.h

-extern struct smp_operations tegra_smp_ops;
+extern const struct smp_operations tegra_smp_ops;
 
 extern int tegra_cpu_kill(unsigned int cpu);
 extern void tegra_cpu_die(unsigned int cpu);

arch/arm/mach-tegra/platsmp.c

@@ -192,7 +192,7 @@ static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
 		scu_enable(IO_ADDRESS(scu_a9_get_base()));
 }
 
-struct smp_operations tegra_smp_ops __initdata = {
+const struct smp_operations tegra_smp_ops __initconst = {
 	.smp_prepare_cpus	= tegra_smp_prepare_cpus,
 	.smp_secondary_init	= tegra_secondary_init,
 	.smp_boot_secondary	= tegra_boot_secondary,

arch/arm/mach-u300/Kconfig

 menuconfig ARCH_U300
-	bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
-	depends on MMU
+	bool "ST-Ericsson U300 Series"
+	depends on ARCH_MULTI_V5 && MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC

arch/arm/mach-uniphier/platsmp.c

@@ -201,7 +201,7 @@ static int __init uniphier_smp_boot_secondary(unsigned int cpu,
 	return 0;
 }
 
-static struct smp_operations uniphier_smp_ops __initdata = {
+static const struct smp_operations uniphier_smp_ops __initconst = {
 	.smp_prepare_cpus	= uniphier_smp_prepare_cpus,
 	.smp_boot_secondary	= uniphier_smp_boot_secondary,
 };

arch/arm/mach-ux500/Kconfig

 menuconfig ARCH_U8500
-	bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7
-	depends on MMU
+	bool "ST-Ericsson U8500 Series"
+	depends on ARCH_MULTI_V7 && MMU
 	select AB8500_CORE
 	select ABX500_CORE
 	select ARCH_REQUIRE_GPIOLIB

arch/arm/mach-ux500/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= cpu.o id.o timer.o pm.o
+obj-y				:= cpu.o id.o pm.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
 obj-$(CONFIG_MACH_MOP500)	+= board-mop500-regulators.o \

arch/arm/mach-ux500/cpu-db8500.c

@@ -156,8 +156,6 @@ static const char * stericsson_dt_platform_compat[] = {
 DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.init_time	= ux500_timer_init,
 	.init_machine	= u8500_init_machine,
 	.init_late	= NULL,
 	.dt_compat      = stericsson_dt_platform_compat,

arch/arm/mach-ux500/cpu.c

@@ -9,7 +9,6 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mfd/dbx500-prcmu.h>
-#include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/sys_soc.h>
 #include <linux/err.h>
 #include <linux/slab.h>

arch/arm/mach-ux500/platsmp.c

@@ -98,7 +98,7 @@ static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-struct smp_operations ux500_smp_ops __initdata = {
+static const struct smp_operations ux500_smp_ops __initconst = {
 	.smp_prepare_cpus	= ux500_smp_prepare_cpus,
 	.smp_boot_secondary	= ux500_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/mach-ux500/setup.h

@@ -12,7 +12,6 @@
 #define __ASM_ARCH_SETUP_H
 
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include <linux/init.h>
 #include <linux/mfd/abx500/ab8500.h>
 
@@ -24,8 +23,6 @@ extern void __init ux500_init_irq(void);
 
 extern struct device *ux500_soc_device_init(const char *soc_id);
 
-extern void ux500_timer_init(void);
-
 extern void ux500_cpu_die(unsigned int cpu);
 
 #endif /*  __ASM_ARCH_SETUP_H */

arch/arm/mach-ux500/timer.c

-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * License Terms: GNU General Public License v2
- * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson
- */
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/clksrc-dbx500-prcmu.h>
-#include <linux/clocksource.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include "setup.h"
-
-#include "db8500-regs.h"
-#include "id.h"
-
-static const struct of_device_id prcmu_timer_of_match[] __initconst = {
-	{ .compatible = "stericsson,db8500-prcmu-timer-4", },
-	{ },
-};
-
-void __init ux500_timer_init(void)
-{
-	void __iomem *prcmu_timer_base;
-	void __iomem *tmp_base;
-	struct device_node *np;
-
-	if (cpu_is_u8500_family() || cpu_is_ux540_family())
-		prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
-	else
-		ux500_unknown_soc();
-
-	np = of_find_matching_node(NULL, prcmu_timer_of_match);
-	if (!np)
-		goto dt_fail;
-
-	tmp_base = of_iomap(np, 0);
-	if (!tmp_base)
-		goto dt_fail;
-
-	prcmu_timer_base = tmp_base;
-
-dt_fail:
-	clksrc_dbx500_prcmu_init(prcmu_timer_base);
-	clocksource_probe();
-}

arch/arm/mach-vexpress/Kconfig

 menuconfig ARCH_VEXPRESS
-	bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
+	bool "ARM Ltd. Versatile Express family"
+	depends on ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA

arch/arm/mach-vexpress/core.h

 bool vexpress_smp_init_ops(void);
 
-extern struct smp_operations	vexpress_smp_dt_ops;
+extern const struct smp_operations vexpress_smp_dt_ops;
 
 extern void vexpress_cpu_die(unsigned int cpu);

arch/arm/mach-vexpress/platsmp.c

@@ -64,7 +64,7 @@ static void __init vexpress_smp_dt_prepare_cpus(unsigned int max_cpus)
 	vexpress_flags_set(virt_to_phys(versatile_secondary_startup));
 }
 
-struct smp_operations __initdata vexpress_smp_dt_ops = {
+const struct smp_operations vexpress_smp_dt_ops __initconst = {
 	.smp_prepare_cpus	= vexpress_smp_dt_prepare_cpus,
 	.smp_secondary_init	= versatile_secondary_init,
 	.smp_boot_secondary	= versatile_boot_secondary,

arch/arm/mach-zx/Kconfig

 menuconfig ARCH_ZX
-	bool "ZTE ZX family" if ARCH_MULTI_V7
+	bool "ZTE ZX family"
+	depends on ARCH_MULTI_V7
 	help
 	  Support for ZTE ZX-based family of processors. TV
 	  set-top-box processor is supported. More will be

arch/arm/mach-zx/platsmp.c

@@ -176,7 +176,7 @@ static void zx_secondary_init(unsigned int cpu)
 	scu_power_mode(scu_base, SCU_PM_NORMAL);
 }
 
-struct smp_operations zx_smp_ops __initdata = {
+static const struct smp_operations zx_smp_ops __initconst = {
 	.smp_prepare_cpus	= zx_smp_prepare_cpus,
 	.smp_secondary_init	= zx_secondary_init,
 	.smp_boot_secondary	= zx_boot_secondary,

arch/arm/mach-zynq/Kconfig

 config ARCH_ZYNQ
-	bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
+	bool "Xilinx Zynq ARM Cortex A9 Platform"
+	depends on ARCH_MULTI_V7
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC

arch/arm/mach-zynq/common.h

@@ -30,7 +30,7 @@ extern char zynq_secondary_trampoline;
 extern char zynq_secondary_trampoline_jump;
 extern char zynq_secondary_trampoline_end;
 extern int zynq_cpun_start(u32 address, int cpu);
-extern struct smp_operations zynq_smp_ops __initdata;
+extern const struct smp_operations zynq_smp_ops;
 #endif
 
 extern void __iomem *zynq_scu_base;

arch/arm/mach-zynq/platsmp.c

@@ -157,7 +157,7 @@ static void zynq_cpu_die(unsigned int cpu)
 }
 #endif
 
-struct smp_operations zynq_smp_ops __initdata = {
+const struct smp_operations zynq_smp_ops __initconst = {
 	.smp_init_cpus		= zynq_smp_init_cpus,
 	.smp_prepare_cpus	= zynq_smp_prepare_cpus,
 	.smp_boot_secondary	= zynq_boot_secondary,

drivers/clocksource/clksrc-dbx500-prcmu.c

@@ -12,8 +12,9 @@
  * power domain.  We use the Timer 4 for our always-on clock
  * source on DB8500.
  */
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/clockchips.h>
-#include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/sched_clock.h>
 
 #define RATE_32K		32768
@@ -63,9 +64,9 @@ static u64 notrace dbx500_prcmu_sched_clock_read(void)
 
 #endif
 
-void __init clksrc_dbx500_prcmu_init(void __iomem *base)
+static void __init clksrc_dbx500_prcmu_init(struct device_node *node)
 {
-	clksrc_dbx500_timer_base = base;
+	clksrc_dbx500_timer_base = of_iomap(node, 0);
 
 	/*
 	 * The A9 sub system expects the timer to be configured as
@@ -85,3 +86,5 @@ void __init clksrc_dbx500_prcmu_init(void __iomem *base)
 #endif
 	clocksource_register_hz(&clocksource_dbx500_prcmu, RATE_32K);
 }
+CLOCKSOURCE_OF_DECLARE(dbx500_prcmu, "stericsson,db8500-prcmu-timer-4",
+		       clksrc_dbx500_prcmu_init);

drivers/staging/board/armadillo800eva.c

@@ -97,7 +97,7 @@ static const struct board_staging_dev armadillo800eva_devices[] __initconst = {
 
 static void __init armadillo800eva_init(void)
 {
-	board_staging_gic_setup_xlate("arm,cortex-a9-gic", 32);
+	board_staging_gic_setup_xlate("arm,pl390", 32);
 	board_staging_register_devices(armadillo800eva_devices,
 				       ARRAY_SIZE(armadillo800eva_devices));
 }

drivers/staging/board/kzm9d.c

@@ -11,7 +11,7 @@ static struct resource usbs1_res[] __initdata = {
 
 static void __init kzm9d_init(void)
 {
-	board_staging_gic_setup_xlate("arm,cortex-a9-gic", 32);
+	board_staging_gic_setup_xlate("arm,pl390", 32);
 
 	if (!board_staging_dt_node_available(usbs1_res,
 					     ARRAY_SIZE(usbs1_res))) {

include/linux/clksrc-dbx500-prcmu.h

-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * License Terms: GNU General Public License v2
- * Author: Mattias Wallin <mattias.wallin@stericsson.com>
- *
- */
-#ifndef __CLKSRC_DBX500_PRCMU_H
-#define __CLKSRC_DBX500_PRCMU_H
-
-#include <linux/init.h>
-#include <linux/io.h>
-
-#ifdef CONFIG_CLKSRC_DBX500_PRCMU
-void __init clksrc_dbx500_prcmu_init(void __iomem *base);
-#else
-static inline void __init clksrc_dbx500_prcmu_init(void __iomem *base) {}
-#endif
-
-#endif