Commit 512a928a authored by Ahmad Fatoum's avatar Ahmad Fatoum Committed by Shawn Guo

ARM: imx: build v7_cpu_resume() unconditionally

This function is not only needed by the platform suspend code, but is also
reused as the CPU resume function when the ARM cores can be powered down
completely in deep idle, which is the case on i.MX6SX and i.MX6UL(L).

Providing the static inline stub whenever CONFIG_SUSPEND is disabled means
that those platforms will hang on resume from cpuidle if suspend is disabled.

So there are two problems:

  - The static inline stub masks the linker error
  - The function is not available where needed

Fix both by just building the function unconditionally, when
CONFIG_SOC_IMX6 is enabled. The actual code is three instructions long,
so it's arguably ok to just leave it in for all i.MX6 kernel configurations.

Fixes: 05136f08 ("ARM: imx: support arm power off in cpuidle for i.mx6sx")
Signed-off-by: default avatarLucas Stach <l.stach@pengutronix.de>
Signed-off-by: default avatarAhmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: default avatarRouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent eb0bbba7
...@@ -91,6 +91,8 @@ AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a ...@@ -91,6 +91,8 @@ AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
endif endif
AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += resume-imx6.o
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
obj-$(CONFIG_SOC_IMX1) += mach-imx1.o obj-$(CONFIG_SOC_IMX1) += mach-imx1.o
......
...@@ -109,17 +109,17 @@ void imx_cpu_die(unsigned int cpu); ...@@ -109,17 +109,17 @@ void imx_cpu_die(unsigned int cpu);
int imx_cpu_kill(unsigned int cpu); int imx_cpu_kill(unsigned int cpu);
#ifdef CONFIG_SUSPEND #ifdef CONFIG_SUSPEND
void v7_cpu_resume(void);
void imx53_suspend(void __iomem *ocram_vbase); void imx53_suspend(void __iomem *ocram_vbase);
extern const u32 imx53_suspend_sz; extern const u32 imx53_suspend_sz;
void imx6_suspend(void __iomem *ocram_vbase); void imx6_suspend(void __iomem *ocram_vbase);
#else #else
static inline void v7_cpu_resume(void) {}
static inline void imx53_suspend(void __iomem *ocram_vbase) {} static inline void imx53_suspend(void __iomem *ocram_vbase) {}
static const u32 imx53_suspend_sz; static const u32 imx53_suspend_sz;
static inline void imx6_suspend(void __iomem *ocram_vbase) {} static inline void imx6_suspend(void __iomem *ocram_vbase) {}
#endif #endif
void v7_cpu_resume(void);
void imx6_pm_ccm_init(const char *ccm_compat); void imx6_pm_ccm_init(const char *ccm_compat);
void imx6q_pm_init(void); void imx6q_pm_init(void);
void imx6dl_pm_init(void); void imx6dl_pm_init(void);
......
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/hardware/cache-l2x0.h>
#include "hardware.h"
/*
* The following code must assume it is running from physical address
* where absolute virtual addresses to the data section have to be
* turned into relative ones.
*/
ENTRY(v7_cpu_resume)
bl v7_invalidate_l1
#ifdef CONFIG_CACHE_L2X0
bl l2c310_early_resume
#endif
b cpu_resume
ENDPROC(v7_cpu_resume)
...@@ -327,17 +327,3 @@ resume: ...@@ -327,17 +327,3 @@ resume:
ret lr ret lr
ENDPROC(imx6_suspend) ENDPROC(imx6_suspend)
/*
* The following code must assume it is running from physical address
* where absolute virtual addresses to the data section have to be
* turned into relative ones.
*/
ENTRY(v7_cpu_resume)
bl v7_invalidate_l1
#ifdef CONFIG_CACHE_L2X0
bl l2c310_early_resume
#endif
b cpu_resume
ENDPROC(v7_cpu_resume)
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment