usb: dwc3: add basic PHY support

this will let us control PHYs on platforms which
need them.
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/dwc3/core.c

@@ -50,6 +50,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
 
+#include <linux/usb/otg.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
@@ -136,6 +137,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
 	reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
 	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 
+	usb_phy_init(dwc->usb2_phy);
+	usb_phy_init(dwc->usb3_phy);
 	mdelay(100);
 
 	/* Clear USB3 PHY reset */
@@ -465,6 +468,18 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(dwc->usb2_phy)) {
+		dev_err(dev, "no usb2 phy configured\n");
+		return -EPROBE_DEFER;
+	}
+
+	dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
+	if (IS_ERR_OR_NULL(dwc->usb3_phy)) {
+		dev_err(dev, "no usb3 phy configured\n");
+		return -EPROBE_DEFER;
+	}
+
 	spin_lock_init(&dwc->lock);
 	platform_set_drvdata(pdev, dwc);
 

drivers/usb/dwc3/core.h

@@ -624,6 +624,8 @@ struct dwc3_scratchpad_array {
  * @maximum_speed: maximum speed requested (mainly for testing purposes)
  * @revision: revision register contents
  * @mode: mode of operation
+ * @usb2_phy: pointer to USB2 PHY
+ * @usb3_phy: pointer to USB3 PHY
  * @is_selfpowered: true when we are selfpowered
  * @three_stage_setup: set if we perform a three phase setup
  * @ep0_bounced: true when we used bounce buffer
@@ -667,6 +669,9 @@ struct dwc3 {
 	struct usb_gadget	gadget;
 	struct usb_gadget_driver *gadget_driver;
 
+	struct usb_phy		*usb2_phy;
+	struct usb_phy		*usb3_phy;
+
 	void __iomem		*regs;
 	size_t			regs_size;