Commit 51f1336d authored by David VomLehn's avatar David VomLehn Committed by Ralf Baechle

MIPS: PowerTV: Add Gaia platform definitions.

Define ASIC address, memory preallocations, and initialization code for the
Gaia platform.
Signed-off-by: default avatarDavid VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1519/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 47a34861
......@@ -40,19 +40,23 @@ enum family_type {
FAMILY_8600VZB,
FAMILY_1500VZE,
FAMILY_1500VZF,
FAMILY_8700,
FAMILIES
};
/* Register maps for each ASIC */
extern const struct register_map calliope_register_map;
extern const struct register_map cronus_register_map;
extern const struct register_map gaia_register_map;
extern const struct register_map zeus_register_map;
extern struct resource dvr_cronus_resources[];
extern struct resource dvr_gaia_resources[];
extern struct resource dvr_zeus_resources[];
extern struct resource non_dvr_calliope_resources[];
extern struct resource non_dvr_cronus_resources[];
extern struct resource non_dvr_cronuslite_resources[];
extern struct resource non_dvr_gaia_resources[];
extern struct resource non_dvr_vz_calliope_resources[];
extern struct resource non_dvr_vze_calliope_resources[];
extern struct resource non_dvr_vzf_calliope_resources[];
......
......@@ -27,7 +27,8 @@ enum asic_type {
ASIC_CALLIOPE,
ASIC_CRONUS,
ASIC_CRONUSLITE,
ASICS
ASIC_GAIA,
ASICS /* Number of supported ASICs */
};
/* hardcoded values read from Chip Version registers */
......@@ -37,6 +38,7 @@ enum asic_type {
#define NAND_FLASH_BASE 0x03000000
#define CALLIOPE_IO_BASE 0x08000000
#define GAIA_IO_BASE 0x09000000
#define CRONUS_IO_BASE 0x09000000
#define ZEUS_IO_BASE 0x09000000
......
......@@ -16,8 +16,8 @@
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
obj-y += asic-calliope.o asic-cronus.o asic-zeus.o asic_devices.o asic_int.o \
irq_asic.o prealloc-calliope.o prealloc-cronus.o \
prealloc-cronuslite.o prealloc-zeus.o
obj-y += asic-calliope.o asic-cronus.o asic-gaia.o asic-zeus.o \
asic_devices.o asic_int.o irq_asic.o prealloc-calliope.o \
prealloc-cronus.o prealloc-cronuslite.o prealloc-gaia.o prealloc-zeus.o
EXTRA_CFLAGS += -Wall -Werror
/*
* Locations of devices in the Gaia ASIC
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: David VomLehn
*/
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
const struct register_map gaia_register_map __initdata = {
.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},
.chipver3 = {.phys = GAIA_IO_BASE + 0x2A0800},
.chipver2 = {.phys = GAIA_IO_BASE + 0x2A0804},
.chipver1 = {.phys = GAIA_IO_BASE + 0x2A0808},
.chipver0 = {.phys = GAIA_IO_BASE + 0x2A080C},
/* The registers of IRBlaster */
.uart1_intstat = {.phys = GAIA_IO_BASE + 0x2A1800},
.uart1_inten = {.phys = GAIA_IO_BASE + 0x2A1804},
.uart1_config1 = {.phys = GAIA_IO_BASE + 0x2A1808},
.uart1_config2 = {.phys = GAIA_IO_BASE + 0x2A180C},
.uart1_divisorhi = {.phys = GAIA_IO_BASE + 0x2A1810},
.uart1_divisorlo = {.phys = GAIA_IO_BASE + 0x2A1814},
.uart1_data = {.phys = GAIA_IO_BASE + 0x2A1818},
.uart1_status = {.phys = GAIA_IO_BASE + 0x2A181C},
.int_stat_3 = {.phys = GAIA_IO_BASE + 0x2A2800},
.int_stat_2 = {.phys = GAIA_IO_BASE + 0x2A2804},
.int_stat_1 = {.phys = GAIA_IO_BASE + 0x2A2808},
.int_stat_0 = {.phys = GAIA_IO_BASE + 0x2A280C},
.int_config = {.phys = GAIA_IO_BASE + 0x2A2810},
.int_int_scan = {.phys = GAIA_IO_BASE + 0x2A2818},
.ien_int_3 = {.phys = GAIA_IO_BASE + 0x2A2830},
.ien_int_2 = {.phys = GAIA_IO_BASE + 0x2A2834},
.ien_int_1 = {.phys = GAIA_IO_BASE + 0x2A2838},
.ien_int_0 = {.phys = GAIA_IO_BASE + 0x2A283C},
.int_level_3_3 = {.phys = GAIA_IO_BASE + 0x2A2880},
.int_level_3_2 = {.phys = GAIA_IO_BASE + 0x2A2884},
.int_level_3_1 = {.phys = GAIA_IO_BASE + 0x2A2888},
.int_level_3_0 = {.phys = GAIA_IO_BASE + 0x2A288C},
.int_level_2_3 = {.phys = GAIA_IO_BASE + 0x2A2890},
.int_level_2_2 = {.phys = GAIA_IO_BASE + 0x2A2894},
.int_level_2_1 = {.phys = GAIA_IO_BASE + 0x2A2898},
.int_level_2_0 = {.phys = GAIA_IO_BASE + 0x2A289C},
.int_level_1_3 = {.phys = GAIA_IO_BASE + 0x2A28A0},
.int_level_1_2 = {.phys = GAIA_IO_BASE + 0x2A28A4},
.int_level_1_1 = {.phys = GAIA_IO_BASE + 0x2A28A8},
.int_level_1_0 = {.phys = GAIA_IO_BASE + 0x2A28AC},
.int_level_0_3 = {.phys = GAIA_IO_BASE + 0x2A28B0},
.int_level_0_2 = {.phys = GAIA_IO_BASE + 0x2A28B4},
.int_level_0_1 = {.phys = GAIA_IO_BASE + 0x2A28B8},
.int_level_0_0 = {.phys = GAIA_IO_BASE + 0x2A28BC},
.int_docsis_en = {.phys = GAIA_IO_BASE + 0x2A28F4},
.mips_pll_setup = {.phys = GAIA_IO_BASE + 0x1C0000},
.fs432x4b4_usb_ctl = {.phys = GAIA_IO_BASE + 0x1C0024},
.test_bus = {.phys = GAIA_IO_BASE + 0x1C00CC},
.crt_spare = {.phys = GAIA_IO_BASE + 0x1c0108},
.usb2_ohci_int_mask = {.phys = GAIA_IO_BASE + 0x20000C},
.usb2_strap = {.phys = GAIA_IO_BASE + 0x200014},
.ehci_hcapbase = {.phys = GAIA_IO_BASE + 0x21FE00},
.ohci_hc_revision = {.phys = GAIA_IO_BASE + 0x21fc00},
.bcm1_bs_lmi_steer = {.phys = GAIA_IO_BASE + 0x2E0004},
.usb2_control = {.phys = GAIA_IO_BASE + 0x2E004C},
.usb2_stbus_obc = {.phys = GAIA_IO_BASE + 0x21FF00},
.usb2_stbus_mess_size = {.phys = GAIA_IO_BASE + 0x21FF04},
.usb2_stbus_chunk_size = {.phys = GAIA_IO_BASE + 0x21FF08},
.pcie_regs = {.phys = GAIA_IO_BASE + 0x220000},
.tim_ch = {.phys = GAIA_IO_BASE + 0x2A2C10},
.tim_cl = {.phys = GAIA_IO_BASE + 0x2A2C14},
.gpio_dout = {.phys = GAIA_IO_BASE + 0x2A2C20},
.gpio_din = {.phys = GAIA_IO_BASE + 0x2A2C24},
.gpio_dir = {.phys = GAIA_IO_BASE + 0x2A2C2C},
.watchdog = {.phys = GAIA_IO_BASE + 0x2A2C30},
.front_panel = {.phys = GAIA_IO_BASE + 0x2A3800},
};
/*
* ASIC Device List Intialization
*
* Description: Defines the platform resources for the SA settop.
* Description: Defines the platform resources for Gaia-based settops.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
......@@ -19,11 +18,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*
* Description: Defines the platform resources for the SA settop.
*
* NOTE: The bootloader allocates persistent memory at an address which is
* 16 MiB below the end of the highest address in KSEG0. All fixed
* address memory reservations must avoid this region.
......@@ -289,6 +283,9 @@ static __init noinline void platform_set_family(void)
case BOOTLDRFAMILY('F', '1'):
platform_family = FAMILY_1500VZF;
break;
case BOOTLDRFAMILY('8', '7'):
platform_family = FAMILY_8700;
break;
default:
platform_family = -1;
}
......@@ -526,6 +523,15 @@ void __init configure_platform(void)
"DVR_CAPABLE\n");
break;
case FAMILY_8700:
platform_features = FFS_CAPABLE | PCIE_CAPABLE;
asic = ASIC_GAIA;
set_register_map(GAIA_IO_BASE, &gaia_register_map);
gp_resources = dvr_gaia_resources;
pr_info("Platform: 8700 - GAIA, DVR_CAPABLE\n");
break;
default:
pr_crit("Platform: UNKNOWN PLATFORM\n");
break;
......
/*
* Memory pre-allocations for Gaia boxes.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: David VomLehn
*/
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
/*
* DVR_CAPABLE GAIA RESOURCES
*/
struct resource dvr_gaia_resources[] __initdata = {
/*
*
* VIDEO1 / LX1
*
*/
{
.name = "ST231aImage", /* Delta-Mu 1 image and ram */
.start = 0x24000000,
.end = 0x241FFFFF, /* 2MiB */
.flags = IORESOURCE_MEM,
},
{
.name = "ST231aMonitor", /* 8KiB block ST231a monitor */
.start = 0x24200000,
.end = 0x24201FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "MediaMemory1",
.start = 0x24202000,
.end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
.flags = IORESOURCE_MEM,
},
/*
*
* VIDEO2 / LX2
*
*/
{
.name = "ST231bImage", /* Delta-Mu 2 image and ram */
.start = 0x60000000,
.end = 0x601FFFFF, /* 2MiB */
.flags = IORESOURCE_IO,
},
{
.name = "ST231bMonitor", /* 8KiB block ST231b monitor */
.start = 0x60200000,
.end = 0x60201FFF,
.flags = IORESOURCE_IO,
},
{
.name = "MediaMemory2",
.start = 0x60202000,
.end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
.flags = IORESOURCE_IO,
},
/*
*
* Sysaudio Driver
*
* This driver requires:
*
* Arbitrary Based Buffers:
* DSP_Image_Buff - DSP code and data images (1MB)
* ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
* ADSC_AUX_Buff - ADSC AUX buffer (16KB)
* ADSC_Main_Buff - ADSC Main buffer (16KB)
*
*/
{
.name = "DSP_Image_Buff",
.start = 0x00000000,
.end = 0x000FFFFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_CPU_PCM_Buff",
.start = 0x00000000,
.end = 0x00009FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_AUX_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_Main_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
/*
*
* STAVEM driver/STAPI
*
* This driver requires:
*
* Arbitrary Based Buffers:
* This memory area is used for allocating buffers for Video decoding
* purposes. Allocation/De-allocation within this buffer is managed
* by the STAVMEM driver of the STAPI. They could be Decimated
* Picture Buffers, Intermediate Buffers, as deemed necessary for
* video decoding purposes, for any video decoders on Zeus.
*
*/
{
.name = "AVMEMPartition0",
.start = 0x63580000,
.end = 0x64180000 - 1, /* 12 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* DOCSIS Subsystem
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "Docsis",
.start = 0x62000000,
.end = 0x62700000 - 1, /* 7 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* GHW HAL Driver
*
* This driver requires:
*
* Arbitrary Based Buffers:
* GraphicsHeap - PowerTV Graphics Heap
*
*/
{
.name = "GraphicsHeap",
.start = 0x62700000,
.end = 0x63500000 - 1, /* 14 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* multi com buffer area
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "MulticomSHM",
.start = 0x26000000,
.end = 0x26020000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* DMA Ring buffer
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "BMM_Buffer",
.start = 0x00000000,
.end = 0x00280000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* Display bins buffer for unit0
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Display Bins for unit0
*
*/
{
.name = "DisplayBins0",
.start = 0x00000000,
.end = 0x00000FFF, /* 4 KB total */
.flags = IORESOURCE_MEM,
},
/*
*
* Display bins buffer
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Display Bins for unit1
*
*/
{
.name = "DisplayBins1",
.start = 0x64AD4000,
.end = 0x64AD5000 - 1, /* 4 KB total */
.flags = IORESOURCE_IO,
},
/*
*
* ITFS
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "ITFS",
.start = 0x64180000,
/* 815,104 bytes each for 2 ITFS partitions. */
.end = 0x6430DFFF,
.flags = IORESOURCE_IO,
},
/*
*
* AVFS
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "AvfsDmaMem",
.start = 0x6430E000,
/* (945K * 8) = (128K *3) 5 playbacks / 3 server */
.end = 0x64AD0000 - 1,
.flags = IORESOURCE_IO,
},
{
.name = "AvfsFileSys",
.start = 0x64AD0000,
.end = 0x64AD1000 - 1, /* 4K */
.flags = IORESOURCE_IO,
},
/*
*
* Smartcard
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Read and write buffers for Internal/External cards
*
*/
{
.name = "SmartCardInfo",
.start = 0x64AD1000,
.end = 0x64AD3800 - 1,
.flags = IORESOURCE_IO,
},
/*
*
* KAVNET
* NP Reset Vector - must be of the form xxCxxxxx
* NP Image - must be video bank 1
* NP IPC - must be video bank 2
*/
{
.name = "NP_Reset_Vector",
.start = 0x27c00000,
.end = 0x27c01000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "NP_Image",
.start = 0x27020000,
.end = 0x27060000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "NP_IPC",
.start = 0x63500000,
.end = 0x63580000 - 1,
.flags = IORESOURCE_IO,
},
/*
* Add other resources here
*/
{ },
};
/*
* NON_DVR_CAPABLE GAIA RESOURCES
*/
struct resource non_dvr_gaia_resources[] __initdata = {
/*
*
* VIDEO1 / LX1
*
*/
{
.name = "ST231aImage", /* Delta-Mu 1 image and ram */
.start = 0x24000000,
.end = 0x241FFFFF, /* 2MiB */
.flags = IORESOURCE_MEM,
},
{
.name = "ST231aMonitor", /* 8KiB block ST231a monitor */
.start = 0x24200000,
.end = 0x24201FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "MediaMemory1",
.start = 0x24202000,
.end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
.flags = IORESOURCE_MEM,
},
/*
*
* VIDEO2 / LX2
*
*/
{
.name = "ST231bImage", /* Delta-Mu 2 image and ram */
.start = 0x60000000,
.end = 0x601FFFFF, /* 2MiB */
.flags = IORESOURCE_IO,
},
{
.name = "ST231bMonitor", /* 8KiB block ST231b monitor */
.start = 0x60200000,
.end = 0x60201FFF,
.flags = IORESOURCE_IO,
},
{
.name = "MediaMemory2",
.start = 0x60202000,
.end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
.flags = IORESOURCE_IO,
},
/*
*
* Sysaudio Driver
*
* This driver requires:
*
* Arbitrary Based Buffers:
* DSP_Image_Buff - DSP code and data images (1MB)
* ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
* ADSC_AUX_Buff - ADSC AUX buffer (16KB)
* ADSC_Main_Buff - ADSC Main buffer (16KB)
*
*/
{
.name = "DSP_Image_Buff",
.start = 0x00000000,
.end = 0x000FFFFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_CPU_PCM_Buff",
.start = 0x00000000,
.end = 0x00009FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_AUX_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_Main_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
/*
*
* STAVEM driver/STAPI
*
* This driver requires:
*
* Arbitrary Based Buffers:
* This memory area is used for allocating buffers for Video decoding
* purposes. Allocation/De-allocation within this buffer is managed
* by the STAVMEM driver of the STAPI. They could be Decimated
* Picture Buffers, Intermediate Buffers, as deemed necessary for
* video decoding purposes, for any video decoders on Zeus.
*
*/
{
.name = "AVMEMPartition0",
.start = 0x63580000,
.end = 0x64180000 - 1, /* 12 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* DOCSIS Subsystem
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "Docsis",
.start = 0x62000000,
.end = 0x62700000 - 1, /* 7 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* GHW HAL Driver
*
* This driver requires:
*
* Arbitrary Based Buffers:
* GraphicsHeap - PowerTV Graphics Heap
*
*/
{
.name = "GraphicsHeap",
.start = 0x62700000,
.end = 0x63500000 - 1, /* 14 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* multi com buffer area
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "MulticomSHM",
.start = 0x26000000,
.end = 0x26020000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* DMA Ring buffer
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "BMM_Buffer",
.start = 0x00000000,
.end = 0x000AA000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* Display bins buffer for unit0
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Display Bins for unit0
*
*/
{
.name = "DisplayBins0",
.start = 0x00000000,
.end = 0x00000FFF, /* 4 KB total */
.flags = IORESOURCE_MEM,
},
/*
*
* Display bins buffer
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Display Bins for unit1
*
*/
{
.name = "DisplayBins1",
.start = 0x64AD4000,
.end = 0x64AD5000 - 1, /* 4 KB total */
.flags = IORESOURCE_IO,
},
/*
*
* AVFS: player HAL memory
*
*
*/
{
.name = "AvfsDmaMem",
.start = 0x6430E000,
.end = 0x645D2C00 - 1, /* 945K * 3 for playback */
.flags = IORESOURCE_IO,
},
/*
*
* PMEM
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Persistent memory for diagnostics.
*
*/
{
.name = "DiagPersistentMemory",
.start = 0x00000000,
.end = 0x10000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* Smartcard
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Read and write buffers for Internal/External cards
*
*/
{
.name = "SmartCardInfo",
.start = 0x64AD1000,
.end = 0x64AD3800 - 1,
.flags = IORESOURCE_IO,
},
/*
*
* KAVNET
* NP Reset Vector - must be of the form xxCxxxxx
* NP Image - must be video bank 1
* NP IPC - must be video bank 2
*/
{
.name = "NP_Reset_Vector",
.start = 0x27c00000,
.end = 0x27c01000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "NP_Image",
.start = 0x27020000,
.end = 0x27060000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "NP_IPC",
.start = 0x63500000,
.end = 0x63580000 - 1,
.flags = IORESOURCE_IO,
},
{ },
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment