Skip to content

L
linux
Commit 51f932c4 authored by Choi, David's avatar Choi, David Committed by David S. Miller
Browse files
Options

micrel phy driver - updated(1) 

Hello all:

This patch fixes what Ben mentioned, namely duplicated ids.

From: David J. Choi <david.choi@micrel.com>

Body of the explanation: This patch has changes as followings;
 -support the interrupt from phy devices from Micrel Inc.
 -support more phy devices, ks8737, ks8721, ks8041, ks8051 from Micrel.
 -remove vsc8201 because this device was used only internal test at Micrel.
Signed-off-by: default avatarDavid J. Choi <david.choi@micrel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent deaec0f6
Show whitespace changes
Inline Side-by-side
Showing with 148 additions and 19 deletions
drivers/net/phy/micrel.c
View file @ 51f932c4
......@@ -12,7 +12,8 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Support : ksz9021 , vsc8201, ks8001
* Support : ksz9021 1000/100/10 phy from Micrel
* ks8001, ks8737, ks8721, ks8041, ks8051 100/10 phy
*/
#include <linux/kernel.h>
......@@ -20,37 +21,146 @@
#include <linux/phy.h>
#define PHY_ID_KSZ9021 0x00221611
#define PHY_ID_VSC8201 0x000FC413
#define PHY_ID_KS8737 0x00221720
#define PHY_ID_KS8041 0x00221510
#define PHY_ID_KS8051 0x00221550
/* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */
#define PHY_ID_KS8001 0x0022161A
/* general Interrupt control/status reg in vendor specific block. */
#define MII_KSZPHY_INTCS 0x1B
#define KSZPHY_INTCS_JABBER (1 << 15)
#define KSZPHY_INTCS_RECEIVE_ERR (1 << 14)
#define KSZPHY_INTCS_PAGE_RECEIVE (1 << 13)
#define KSZPHY_INTCS_PARELLEL (1 << 12)
#define KSZPHY_INTCS_LINK_PARTNER_ACK (1 << 11)
#define KSZPHY_INTCS_LINK_DOWN (1 << 10)
#define KSZPHY_INTCS_REMOTE_FAULT (1 << 9)
#define KSZPHY_INTCS_LINK_UP (1 << 8)
#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\
KSZPHY_INTCS_LINK_DOWN)
/* general PHY control reg in vendor specific block. */
#define MII_KSZPHY_CTRL 0x1F
/* bitmap of PHY register to set interrupt mode */
#define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9)
#define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14)
#define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14)
static int kszphy_ack_interrupt(struct phy_device *phydev)
{
/* bit[7..0] int status, which is a read and clear register. */
int rc;
rc = phy_read(phydev, MII_KSZPHY_INTCS);
return (rc < 0) ? rc : 0;
}
static int kszphy_set_interrupt(struct phy_device *phydev)
{
int temp;
temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ?
KSZPHY_INTCS_ALL : 0;
return phy_write(phydev, MII_KSZPHY_INTCS, temp);
}
static int kszphy_config_intr(struct phy_device *phydev)
{
int temp, rc;
/* set the interrupt pin active low */
temp = phy_read(phydev, MII_KSZPHY_CTRL);
temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH;
phy_write(phydev, MII_KSZPHY_CTRL, temp);
rc = kszphy_set_interrupt(phydev);
return rc < 0 ? rc : 0;
}
static int ksz9021_config_intr(struct phy_device *phydev)
{
int temp, rc;
/* set the interrupt pin active low */
temp = phy_read(phydev, MII_KSZPHY_CTRL);
temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH;
phy_write(phydev, MII_KSZPHY_CTRL, temp);
rc = kszphy_set_interrupt(phydev);
return rc < 0 ? rc : 0;
}
static int ks8737_config_intr(struct phy_device *phydev)
{
int temp, rc;
/* set the interrupt pin active low */
temp = phy_read(phydev, MII_KSZPHY_CTRL);
temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH;
phy_write(phydev, MII_KSZPHY_CTRL, temp);
rc = kszphy_set_interrupt(phydev);
return rc < 0 ? rc : 0;
}
static int kszphy_config_init(struct phy_device *phydev)
{
return 0;
}
static struct phy_driver ks8737_driver = {
.phy_id = PHY_ID_KS8737,
.phy_id_mask = 0x00fffff0,
.name = "Micrel KS8737",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
.config_intr = ks8737_config_intr,
.driver = { .owner = THIS_MODULE,},
};
static struct phy_driver ks8041_driver = {
.phy_id = PHY_ID_KS8041,
.phy_id_mask = 0x00fffff0,
.name = "Micrel KS8041",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
.config_intr = kszphy_config_intr,
.driver = { .owner = THIS_MODULE,},
};
static struct phy_driver ks8001_driver = {
.phy_id = PHY_ID_KS8001,
.name = "Micrel KS8001",
static struct phy_driver ks8051_driver = {
.phy_id = PHY_ID_KS8051,
.phy_id_mask = 0x00fffff0,
.features = PHY_BASIC_FEATURES,
.flags = PHY_POLL,
.name = "Micrel KS8051",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
.config_intr = kszphy_config_intr,
.driver = { .owner = THIS_MODULE,},
};
static struct phy_driver vsc8201_driver = {
.phy_id = PHY_ID_VSC8201,
.name = "Micrel VSC8201",
static struct phy_driver ks8001_driver = {
.phy_id = PHY_ID_KS8001,
.name = "Micrel KS8001 or KS8721",
.phy_id_mask = 0x00fffff0,
.features = PHY_BASIC_FEATURES,
.flags = PHY_POLL,
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
.config_intr = kszphy_config_intr,
.driver = { .owner = THIS_MODULE,},
};
......@@ -58,11 +168,14 @@ static struct phy_driver ksz9021_driver = {
.phy_id = PHY_ID_KSZ9021,
.phy_id_mask = 0x000fff10,
.name = "Micrel KSZ9021 Gigabit PHY",
.features = PHY_GBIT_FEATURES | SUPPORTED_Pause,
.flags = PHY_POLL,
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
.config_intr = ksz9021_config_intr,
.driver = { .owner = THIS_MODULE, },
};
......@@ -73,17 +186,29 @@ static int __init ksphy_init(void)
ret = phy_driver_register(&ks8001_driver);
if (ret)
goto err1;
ret = phy_driver_register(&vsc8201_driver);
ret = phy_driver_register(&ksz9021_driver);
if (ret)
goto err2;
ret = phy_driver_register(&ksz9021_driver);
ret = phy_driver_register(&ks8737_driver);
if (ret)
goto err3;
ret = phy_driver_register(&ks8041_driver);
if (ret)
goto err4;
ret = phy_driver_register(&ks8051_driver);
if (ret)
goto err5;
return 0;
err5:
phy_driver_unregister(&ks8041_driver);
err4:
phy_driver_unregister(&ks8737_driver);
err3:
phy_driver_unregister(&vsc8201_driver);
phy_driver_unregister(&ksz9021_driver);
err2:
phy_driver_unregister(&ks8001_driver);
err1:
......@@ -93,8 +218,10 @@ static int __init ksphy_init(void)
static void __exit ksphy_exit(void)
{
phy_driver_unregister(&ks8001_driver);
phy_driver_unregister(&vsc8201_driver);
phy_driver_unregister(&ks8737_driver);
phy_driver_unregister(&ksz9021_driver);
phy_driver_unregister(&ks8041_driver);
phy_driver_unregister(&ks8051_driver);
}
module_init(ksphy_init);
......@@ -106,8 +233,10 @@ MODULE_LICENSE("GPL");
static struct mdio_device_id micrel_tbl[] = {
{ PHY_ID_KSZ9021, 0x000fff10 },
{ PHY_ID_VSC8201, 0x00fffff0 },
{ PHY_ID_KS8001, 0x00fffff0 },
{ PHY_ID_KS8737, 0x00fffff0 },
{ PHY_ID_KS8041, 0x00fffff0 },
{ PHY_ID_KS8051, 0x00fffff0 },
{ }
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7