Commit 521613c5 authored by David S. Miller's avatar David S. Miller

Merge branch 'dsa2-pdata'

Florian Fainelli says:

====================
net: dsa: Support for pdata in dsa2

This is not exactly new, and was sent before, although back then, I did not
have an user of the pre-declared MDIO board information, but now we do. Note
that I have additional changes queued up to have b53 register platform data for
MIPS bcm47xx and bcm63xx.

Yes I know that we should have the Orion platforms eventually be converted to
Device Tree, but until that happens, I don't want any remaining users of the
old "dsa" platform device (hence the previous DTS submissions for ARM/mvebu)
and, there will be platforms out there that most likely won't never see DT
coming their way (BCM47xx is almost 100% sure, BCM63xx maybe not in a distant
future).

We would probably want the whole series to be merged via David Miller's tree
to simplify things.

Thanks!

Changes in v5:

- dropped changes to drivers/base/ because after more than a month, we cannot
  get any answer from Greg KH

Changes in v4:

- Changed device_find_class() to device_find_in_class_name()
- Added kerneldoc above device_find_in_class_name() to explain what it does
  and the calling convention regarding device reference counts
- Changed dev_to_net_device to device_to_net_device() added comments
  about what it does and the caller conventions regarding reference counts

Changes in v3:

- Tested EPROBE_DEFER from a mockup MDIO/DSA switch driver and everything
  is fine, once the driver finally probes we have access to platform data
  as expected

- added comment above dsa_port_is_valid() that port->name is mandatory
  for platform data cases

- added an extra check in dsa_parse_member() for a NULL pdata pointer

- fixed a bunch of checkpatch errors and warnings

Changes in v2:

- Rebased against latest net-next/master

- Moved dev_find_class() to device_find_class() into drivers/base/core.c

- Moved dev_to_net_device into net/core/dev.c

- Utilize dsa_chip_data directly instead of dsa_platform_data

- Augmented dsa_chip_data to be multi-CPU port ready

Changes from last submission (few months back):

- rebased against latest net-next

- do not introduce dsa2_platform_data which was overkill and was meant to
  allow us to do exaclty the same things with platform data and Device Tree
  we use the existing dsa_platform_data instead

- properly register MDIO devices when the MDIO bus is registered and associate
  platform_data with them

- add a change to the Orion platform code to demonstrate how this can be used

Thank you
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents a23b2961 575e93f7
......@@ -105,7 +105,7 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
/*****************************************************************************
* Ethernet switch
****************************************************************************/
void __init orion5x_eth_switch_init(struct dsa_platform_data *d)
void __init orion5x_eth_switch_init(struct dsa_chip_data *d)
{
orion_ge00_switch_init(d);
}
......
......@@ -3,7 +3,7 @@
#include <linux/reboot.h>
struct dsa_platform_data;
struct dsa_chip_data;
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
......@@ -41,7 +41,7 @@ void orion5x_setup_wins(void);
void orion5x_ehci0_init(void);
void orion5x_ehci1_init(void);
void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
void orion5x_eth_switch_init(struct dsa_platform_data *d);
void orion5x_eth_switch_init(struct dsa_chip_data *d);
void orion5x_i2c_init(void);
void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
void orion5x_spi_init(void);
......
......@@ -101,11 +101,6 @@ static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
.port_names[7] = "lan3",
};
static struct dsa_platform_data __initdata rd88f5181l_fxo_switch_plat_data = {
.nr_chips = 1,
.chip = &rd88f5181l_fxo_switch_chip_data,
};
static void __init rd88f5181l_fxo_init(void)
{
/*
......@@ -120,7 +115,7 @@ static void __init rd88f5181l_fxo_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f5181l_fxo_eth_data);
orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data);
orion5x_eth_switch_init(&rd88f5181l_fxo_switch_chip_data);
orion5x_uart0_init();
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
......
......@@ -102,11 +102,6 @@ static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
.port_names[7] = "lan3",
};
static struct dsa_platform_data __initdata rd88f5181l_ge_switch_plat_data = {
.nr_chips = 1,
.chip = &rd88f5181l_ge_switch_chip_data,
};
static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
I2C_BOARD_INFO("ds1338", 0x68),
};
......@@ -125,7 +120,7 @@ static void __init rd88f5181l_ge_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f5181l_ge_eth_data);
orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data);
orion5x_eth_switch_init(&rd88f5181l_ge_switch_chip_data);
orion5x_i2c_init();
orion5x_uart0_init();
......
......@@ -40,11 +40,6 @@ static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
.port_names[5] = "cpu",
};
static struct dsa_platform_data __initdata rd88f6183ap_ge_switch_plat_data = {
.nr_chips = 1,
.chip = &rd88f6183ap_ge_switch_chip_data,
};
static struct mtd_partition rd88f6183ap_ge_partitions[] = {
{
.name = "kernel",
......@@ -89,7 +84,7 @@ static void __init rd88f6183ap_ge_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f6183ap_ge_eth_data);
orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data);
orion5x_eth_switch_init(&rd88f6183ap_ge_switch_chip_data);
spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
orion5x_spi_init();
......
......@@ -124,7 +124,7 @@ static void __init wnr854t_init(void)
* Configure peripherals.
*/
orion5x_eth_init(&wnr854t_eth_data);
orion5x_eth_switch_init(&wnr854t_switch_plat_data);
orion5x_eth_switch_init(&wnr854t_switch_chip_data);
orion5x_uart0_init();
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
......
......@@ -191,11 +191,6 @@ static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
.port_names[7] = "lan4",
};
static struct dsa_platform_data __initdata wrt350n_v2_switch_plat_data = {
.nr_chips = 1,
.chip = &wrt350n_v2_switch_chip_data,
};
static void __init wrt350n_v2_init(void)
{
/*
......@@ -210,7 +205,7 @@ static void __init wrt350n_v2_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&wrt350n_v2_eth_data);
orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data);
orion5x_eth_switch_init(&wrt350n_v2_switch_chip_data);
orion5x_uart0_init();
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
......
......@@ -22,6 +22,7 @@
#include <linux/platform_data/dma-mv_xor.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/common.h>
#include <linux/phy.h>
/* Create a clkdev entry for a given device/clk */
void __init orion_clkdev_add(const char *con_id, const char *dev_id,
......@@ -470,15 +471,27 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
/*****************************************************************************
* Ethernet switch
****************************************************************************/
void __init orion_ge00_switch_init(struct dsa_platform_data *d)
static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii";
static __initdata struct mdio_board_info
orion_ge00_switch_board_info;
void __init orion_ge00_switch_init(struct dsa_chip_data *d)
{
int i;
struct mdio_board_info *bd;
unsigned int i;
for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
if (!strcmp(d->port_names[i], "cpu"))
break;
d->netdev = &orion_ge00.dev;
for (i = 0; i < d->nr_chips; i++)
d->chip[i].host_dev = &orion_ge_mvmdio.dev;
bd = &orion_ge00_switch_board_info;
bd->bus_id = orion_ge00_mvmdio_bus_name;
bd->mdio_addr = d->sw_addr;
d->netdev[i] = &orion_ge00.dev;
strcpy(bd->modalias, "mv88e6085");
bd->platform_data = d;
platform_device_register_data(NULL, "dsa", 0, d, sizeof(d));
mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
}
/*****************************************************************************
......
......@@ -12,7 +12,7 @@
#include <linux/mv643xx_eth.h>
#include <linux/platform_data/usb-ehci-orion.h>
struct dsa_platform_data;
struct dsa_chip_data;
struct mv_sata_platform_data;
void __init orion_uart0_init(void __iomem *membase,
......@@ -57,7 +57,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq);
void __init orion_ge00_switch_init(struct dsa_platform_data *d);
void __init orion_ge00_switch_init(struct dsa_chip_data *d);
void __init orion_i2c_init(unsigned long mapbase,
unsigned long irq,
......
# Makefile for Linux PHY drivers and MDIO bus drivers
libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o
libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o \
mdio-boardinfo.o
libphy-$(CONFIG_SWPHY) += swphy.o
libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o
......
/*
* mdio-boardinfo - Collect pre-declarations for MDIO devices
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/mutex.h>
#include <linux/list.h>
#include "mdio-boardinfo.h"
static LIST_HEAD(mdio_board_list);
static DEFINE_MUTEX(mdio_board_lock);
/**
* mdiobus_setup_mdiodev_from_board_info - create and setup MDIO devices
* from pre-collected board specific MDIO information
* @mdiodev: MDIO device pointer
* Context: can sleep
*/
void mdiobus_setup_mdiodev_from_board_info(struct mii_bus *bus)
{
struct mdio_board_entry *be;
struct mdio_device *mdiodev;
struct mdio_board_info *bi;
int ret;
mutex_lock(&mdio_board_lock);
list_for_each_entry(be, &mdio_board_list, list) {
bi = &be->board_info;
if (strcmp(bus->id, bi->bus_id))
continue;
mdiodev = mdio_device_create(bus, bi->mdio_addr);
if (IS_ERR(mdiodev))
continue;
strncpy(mdiodev->modalias, bi->modalias,
sizeof(mdiodev->modalias));
mdiodev->bus_match = mdio_device_bus_match;
mdiodev->dev.platform_data = (void *)bi->platform_data;
ret = mdio_device_register(mdiodev);
if (ret) {
mdio_device_free(mdiodev);
continue;
}
}
mutex_unlock(&mdio_board_lock);
}
/**
* mdio_register_board_info - register MDIO devices for a given board
* @info: array of devices descriptors
* @n: number of descriptors provided
* Context: can sleep
*
* The board info passed can be marked with __initdata but be pointers
* such as platform_data etc. are copied as-is
*/
int mdiobus_register_board_info(const struct mdio_board_info *info,
unsigned int n)
{
struct mdio_board_entry *be;
unsigned int i;
be = kcalloc(n, sizeof(*be), GFP_KERNEL);
if (!be)
return -ENOMEM;
for (i = 0; i < n; i++, be++, info++) {
memcpy(&be->board_info, info, sizeof(*info));
mutex_lock(&mdio_board_lock);
list_add_tail(&be->list, &mdio_board_list);
mutex_unlock(&mdio_board_lock);
}
return 0;
}
/*
* mdio-boardinfo.h - board info interface internal to the mdio_bus
* component
*/
#ifndef __MDIO_BOARD_INFO_H
#define __MDIO_BOARD_INFO_H
#include <linux/phy.h>
#include <linux/mutex.h>
struct mdio_board_entry {
struct list_head list;
struct mdio_board_info board_info;
};
void mdiobus_setup_mdiodev_from_board_info(struct mii_bus *bus);
#endif /* __MDIO_BOARD_INFO_H */
......@@ -41,6 +41,8 @@
#define CREATE_TRACE_POINTS
#include <trace/events/mdio.h>
#include "mdio-boardinfo.h"
int mdiobus_register_device(struct mdio_device *mdiodev)
{
if (mdiodev->bus->mdio_map[mdiodev->addr])
......@@ -343,6 +345,8 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
}
}
mdiobus_setup_mdiodev_from_board_info(bus);
bus->state = MDIOBUS_REGISTERED;
pr_info("%s: probed\n", bus->name);
return 0;
......
......@@ -34,6 +34,17 @@ static void mdio_device_release(struct device *dev)
kfree(to_mdio_device(dev));
}
int mdio_device_bus_match(struct device *dev, struct device_driver *drv)
{
struct mdio_device *mdiodev = to_mdio_device(dev);
struct mdio_driver *mdiodrv = to_mdio_driver(drv);
if (mdiodrv->mdiodrv.flags & MDIO_DEVICE_IS_PHY)
return 0;
return strcmp(mdiodev->modalias, drv->name) == 0;
}
struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr)
{
struct mdio_device *mdiodev;
......
......@@ -10,6 +10,7 @@
#define __LINUX_MDIO_H__
#include <uapi/linux/mdio.h>
#include <linux/mod_devicetable.h>
struct mii_bus;
......@@ -29,6 +30,7 @@ struct mdio_device {
const struct dev_pm_ops *pm_ops;
struct mii_bus *bus;
char modalias[MDIO_NAME_SIZE];
int (*bus_match)(struct device *dev, struct device_driver *drv);
void (*device_free)(struct mdio_device *mdiodev);
......@@ -71,6 +73,7 @@ int mdio_device_register(struct mdio_device *mdiodev);
void mdio_device_remove(struct mdio_device *mdiodev);
int mdio_driver_register(struct mdio_driver *drv);
void mdio_driver_unregister(struct mdio_driver *drv);
int mdio_device_bus_match(struct device *dev, struct device_driver *drv);
static inline bool mdio_phy_id_is_c45(int phy_id)
{
......
......@@ -501,6 +501,7 @@ struct platform_device_id {
kernel_ulong_t driver_data;
};
#define MDIO_NAME_SIZE 32
#define MDIO_MODULE_PREFIX "mdio:"
#define MDIO_ID_FMT "%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d"
......
......@@ -886,6 +886,25 @@ void mdio_bus_exit(void);
extern struct bus_type mdio_bus_type;
struct mdio_board_info {
const char *bus_id;
char modalias[MDIO_NAME_SIZE];
int mdio_addr;
const void *platform_data;
};
#if IS_ENABLED(CONFIG_PHYLIB)
int mdiobus_register_board_info(const struct mdio_board_info *info,
unsigned int n);
#else
static inline int mdiobus_register_board_info(const struct mdio_board_info *i,
unsigned int n)
{
return 0;
}
#endif
/**
* module_phy_driver() - Helper macro for registering PHY drivers
* @__phy_drivers: array of PHY drivers to register
......
......@@ -45,6 +45,11 @@ struct dsa_chip_data {
struct device *host_dev;
int sw_addr;
/*
* Reference to network devices
*/
struct device *netdev[DSA_MAX_PORTS];
/* set to size of eeprom if supported by the switch */
int eeprom_len;
......@@ -170,6 +175,7 @@ struct dsa_mall_tc_entry {
struct dsa_port {
struct dsa_switch *ds;
unsigned int index;
const char *name;
struct net_device *netdev;
struct device_node *dn;
unsigned int ageing_time;
......@@ -445,6 +451,7 @@ struct dsa_switch_driver {
void register_switch_driver(struct dsa_switch_driver *type);
void unregister_switch_driver(struct dsa_switch_driver *type);
struct mii_bus *dsa_host_dev_to_mii_bus(struct device *dev);
struct net_device *dsa_dev_to_net_device(struct device *dev);
static inline bool dsa_uses_tagged_protocol(struct dsa_switch_tree *dst)
{
......
......@@ -492,7 +492,7 @@ struct mii_bus *dsa_host_dev_to_mii_bus(struct device *dev)
}
EXPORT_SYMBOL_GPL(dsa_host_dev_to_mii_bus);
static struct net_device *dev_to_net_device(struct device *dev)
struct net_device *dsa_dev_to_net_device(struct device *dev)
{
struct device *d;
......@@ -509,6 +509,7 @@ static struct net_device *dev_to_net_device(struct device *dev)
return NULL;
}
EXPORT_SYMBOL_GPL(dsa_dev_to_net_device);
#ifdef CONFIG_OF
static int dsa_of_setup_routing_table(struct dsa_platform_data *pd,
......@@ -817,7 +818,7 @@ static int dsa_probe(struct platform_device *pdev)
dev = pd->of_netdev;
dev_hold(dev);
} else {
dev = dev_to_net_device(pd->netdev);
dev = dsa_dev_to_net_device(pd->netdev);
}
if (dev == NULL) {
ret = -EPROBE_DEFER;
......
......@@ -78,18 +78,27 @@ static void dsa_dst_del_ds(struct dsa_switch_tree *dst,
kref_put(&dst->refcount, dsa_free_dst);
}
/* For platform data configurations, we need to have a valid name argument to
* differentiate a disabled port from an enabled one
*/
static bool dsa_port_is_valid(struct dsa_port *port)
{
return !!port->dn;
return !!(port->dn || port->name);
}
static bool dsa_port_is_dsa(struct dsa_port *port)
{
if (port->name && !strcmp(port->name, "dsa"))
return true;
else
return !!of_parse_phandle(port->dn, "link", 0);
}
static bool dsa_port_is_cpu(struct dsa_port *port)
{
if (port->name && !strcmp(port->name, "cpu"))
return true;
else
return !!of_parse_phandle(port->dn, "ethernet", 0);
}
......@@ -250,9 +259,10 @@ static void dsa_cpu_port_unapply(struct dsa_port *port, u32 index,
static int dsa_user_port_apply(struct dsa_port *port, u32 index,
struct dsa_switch *ds)
{
const char *name;
const char *name = port->name;
int err;
if (port->dn)
name = of_get_property(port->dn, "label", NULL);
if (!name)
name = "eth%d";
......@@ -444,11 +454,16 @@ static int dsa_cpu_parse(struct dsa_port *port, u32 index,
struct net_device *ethernet_dev;
struct device_node *ethernet;
if (port->dn) {
ethernet = of_parse_phandle(port->dn, "ethernet", 0);
if (!ethernet)
return -EINVAL;
ethernet_dev = of_find_net_device_by_node(ethernet);
} else {
ethernet_dev = dsa_dev_to_net_device(ds->cd->netdev[index]);
dev_put(ethernet_dev);
}
if (!ethernet_dev)
return -EPROBE_DEFER;
......@@ -551,6 +566,33 @@ static int dsa_parse_ports_dn(struct device_node *ports, struct dsa_switch *ds)
return 0;
}
static int dsa_parse_ports(struct dsa_chip_data *cd, struct dsa_switch *ds)
{
bool valid_name_found = false;
unsigned int i;
for (i = 0; i < DSA_MAX_PORTS; i++) {
if (!cd->port_names[i])
continue;
ds->ports[i].name = cd->port_names[i];
/* Initialize enabled_port_mask now for drv->setup()
* to have access to a correct value, just like what
* net/dsa/dsa.c::dsa_switch_setup_one does.
*/
if (!dsa_port_is_cpu(&ds->ports[i]))
ds->enabled_port_mask |= 1 << i;
valid_name_found = true;
}
if (!valid_name_found && i == DSA_MAX_PORTS)
return -EINVAL;
return 0;
}
static int dsa_parse_member_dn(struct device_node *np, u32 *tree, u32 *index)
{
int err;
......@@ -575,6 +617,18 @@ static int dsa_parse_member_dn(struct device_node *np, u32 *tree, u32 *index)
return 0;
}
static int dsa_parse_member(struct dsa_chip_data *pd, u32 *tree, u32 *index)
{
if (!pd)
return -ENODEV;
/* We do not support complex trees with dsa_chip_data */
*tree = 0;
*index = 0;
return 0;
}
static struct device_node *dsa_get_ports(struct dsa_switch *ds,
struct device_node *np)
{
......@@ -591,12 +645,14 @@ static struct device_node *dsa_get_ports(struct dsa_switch *ds,
static int _dsa_register_switch(struct dsa_switch *ds, struct device *dev)
{
struct dsa_chip_data *pdata = dev->platform_data;
struct device_node *np = dev->of_node;
struct dsa_switch_tree *dst;
struct device_node *ports;
u32 tree, index;
int i, err;
if (np) {
err = dsa_parse_member_dn(np, &tree, &index);
if (err)
return err;
......@@ -608,6 +664,15 @@ static int _dsa_register_switch(struct dsa_switch *ds, struct device *dev)
err = dsa_parse_ports_dn(ports, ds);
if (err)
return err;
} else {
err = dsa_parse_member(pdata, &tree, &index);
if (err)
return err;
err = dsa_parse_ports(pdata, ds);
if (err)
return err;
}
dst = dsa_get_dst(tree);
if (!dst) {
......@@ -623,6 +688,7 @@ static int _dsa_register_switch(struct dsa_switch *ds, struct device *dev)
ds->dst = dst;
ds->index = index;
ds->cd = pdata;
/* Initialize the routing table */
for (i = 0; i < DSA_MAX_SWITCHES; ++i)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment