Skip to content

L
linux
Commit 52650505 authored by Paul Walmsley's avatar Paul Walmsley Committed by paul
Browse files
Options

OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c 

The OMAP1 clock code currently #includes a large .h file full of static
data structures.  Instead, define the data in a .c file.

Russell King <linux@arm.linux.org.uk> proposed this new arrangement:

    http://marc.info/?l=linux-omap&m=125967425908895&w=2

This patch also deals with most of the flagrant checkpatch violations.

While here, separate the mpu_rate data structures out into their own
files, opp.h and opp_data.c.  In the long run, these mpu_rate tables
should be replaced with OPP code.

Also includes a patch from Felipe Balbi <felipe.balbi@nokia.com> to
mark omap1_clk_functions as __initdata to avoid a section warning:

    http://patchwork.kernel.org/patch/64366/Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Nishanth Menon <nm@ti.com>
parent 6f62b58d
Show whitespace changes
Inline Side-by-side
Showing with 1096 additions and 1013 deletions
arch/arm/mach-omap1/Makefile
View file @ 52650505
......@@ -3,7 +3,8 @@
#
# Common support
obj-y := io.o id.o sram.o clock.o irq.o mux.o serial.o devices.o
obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o
obj-y += clock.o clock_data.o opp_data.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
......
arch/arm/mach-omap1/clock.c
View file @ 52650505
/*
* linux/arch/arm/mach-omap1/clock.c
*
* Copyright (C) 2004 - 2005 Nokia corporation
* Copyright (C) 2004 - 2005, 2009 Nokia corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
*
* Modified to use omap shared clock framework by
......@@ -26,12 +26,17 @@
#include <plat/usb.h>
#include <plat/clock.h>
#include <plat/sram.h>
static const struct clkops clkops_generic;
static const struct clkops clkops_uart;
static const struct clkops clkops_dspck;
#include <plat/clkdev_omap.h>
#include "clock.h"
#include "opp.h"
__u32 arm_idlect1_mask;
struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
/*-------------------------------------------------------------------------
* Omap1 specific clock functions
*-------------------------------------------------------------------------*/
static int clk_omap1_dummy_enable(struct clk *clk)
{
......@@ -42,134 +47,24 @@ static void clk_omap1_dummy_disable(struct clk *clk)
{
}
static const struct clkops clkops_dummy = {
const struct clkops clkops_dummy = {
.enable = clk_omap1_dummy_enable,
.disable = clk_omap1_dummy_disable,
};
static struct clk dummy_ck = {
.name = "dummy",
.ops = &clkops_dummy,
.flags = RATE_FIXED,
};
struct omap_clk {
u32 cpu;
struct clk_lookup lk;
};
#define CLK(dev, con, ck, cp) \
{ \
.cpu = cp, \
.lk = { \
.dev_id = dev, \
.con_id = con, \
.clk = ck, \
}, \
}
#define CK_310 (1 << 0)
#define CK_7XX (1 << 1)
#define CK_1510 (1 << 2)
#define CK_16XX (1 << 3)
static struct omap_clk omap_clks[] = {
/* non-ULPD clocks */
CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310),
/* CK_GEN1 clocks */
CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX),
CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX),
CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310),
CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX),
CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310),
CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310),
CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX),
/* CK_GEN2 clocks */
CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310),
/* CK_GEN3 clocks */
CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310),
CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX),
CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX),
CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX),
CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310),
CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX),
CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX),
CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX),
CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310),
/* ULPD clocks */
CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310),
CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX),
CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310),
CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX),
CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX),
CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX),
CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX),
CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310),
CLK(NULL, "mclk", &mclk_16xx, CK_16XX),
CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310),
CLK(NULL, "bclk", &bclk_16xx, CK_16XX),
CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310),
CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX),
CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX),
CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX),
/* Virtual clocks */
CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310),
CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310),
CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX),
CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310),
CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX),
CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310),
CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
};
static int omap1_clk_enable_generic(struct clk * clk);
static int omap1_clk_enable(struct clk *clk);
static void omap1_clk_disable_generic(struct clk * clk);
static void omap1_clk_disable(struct clk *clk);
__u32 arm_idlect1_mask;
/*-------------------------------------------------------------------------
* Omap1 specific clock functions
*-------------------------------------------------------------------------*/
static unsigned long omap1_watchdog_recalc(struct clk *clk)
/* XXX can be replaced with a fixed_divisor_recalc */
unsigned long omap1_watchdog_recalc(struct clk *clk)
{
return clk->parent->rate / 14;
}
static unsigned long omap1_uart_recalc(struct clk *clk)
unsigned long omap1_uart_recalc(struct clk *clk)
{
unsigned int val = __raw_readl(clk->enable_reg);
return val & clk->enable_bit ? 48000000 : 12000000;
}
static unsigned long omap1_sossi_recalc(struct clk *clk)
unsigned long omap1_sossi_recalc(struct clk *clk)
{
u32 div = omap_readl(MOD_CONF_CTRL_1);
......@@ -179,64 +74,6 @@ static unsigned long omap1_sossi_recalc(struct clk *clk)
return clk->parent->rate / div;
}
static int omap1_clk_enable_dsp_domain(struct clk *clk)
{
int retval;
retval = omap1_clk_enable(&api_ck.clk);
if (!retval) {
retval = omap1_clk_enable_generic(clk);
omap1_clk_disable(&api_ck.clk);
}
return retval;
}
static void omap1_clk_disable_dsp_domain(struct clk *clk)
{
if (omap1_clk_enable(&api_ck.clk) == 0) {
omap1_clk_disable_generic(clk);
omap1_clk_disable(&api_ck.clk);
}
}
static const struct clkops clkops_dspck = {
.enable = &omap1_clk_enable_dsp_domain,
.disable = &omap1_clk_disable_dsp_domain,
};
static int omap1_clk_enable_uart_functional(struct clk *clk)
{
int ret;
struct uart_clk *uclk;
ret = omap1_clk_enable_generic(clk);
if (ret == 0) {
/* Set smart idle acknowledgement mode */
uclk = (struct uart_clk *)clk;
omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8,
uclk->sysc_addr);
}
return ret;
}
static void omap1_clk_disable_uart_functional(struct clk *clk)
{
struct uart_clk *uclk;
/* Set force idle acknowledgement mode */
uclk = (struct uart_clk *)clk;
omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr);
omap1_clk_disable_generic(clk);
}
static const struct clkops clkops_uart = {
.enable = &omap1_clk_enable_uart_functional,
.disable = &omap1_clk_disable_uart_functional,
};
static void omap1_clk_allow_idle(struct clk *clk)
{
struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
......@@ -344,7 +181,7 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
return dsor_exp;
}
static unsigned long omap1_ckctl_recalc(struct clk *clk)
unsigned long omap1_ckctl_recalc(struct clk *clk)
{
/* Calculate divisor encoded as 2-bit exponent */
int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
......@@ -352,7 +189,7 @@ static unsigned long omap1_ckctl_recalc(struct clk *clk)
return clk->parent->rate / dsor;
}
static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
{
int dsor;
......@@ -363,25 +200,29 @@ static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
* Note that DSP_CKCTL virt addr = phys addr, so
* we must use __raw_readw() instead of omap_readw().
*/
omap1_clk_enable(&api_ck.clk);
omap1_clk_enable(api_ck_p);
dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
omap1_clk_disable(&api_ck.clk);
omap1_clk_disable(api_ck_p);
return clk->parent->rate / dsor;
}
/* MPU virtual clock functions */
static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
int omap1_select_table_rate(struct clk *clk, unsigned long rate)
{
/* Find the highest supported frequency <= rate and switch to it */
struct mpu_rate * ptr;
unsigned long dpll1_rate, ref_rate;
dpll1_rate = clk_get_rate(ck_dpll1_p);
ref_rate = clk_get_rate(ck_ref_p);
for (ptr = rate_table; ptr->rate; ptr++) {
if (ptr->xtal != ck_ref.rate)
for (ptr = omap1_rate_table; ptr->rate; ptr++) {
if (ptr->xtal != ref_rate)
continue;
/* DPLL1 cannot be reprogrammed without risking system crash */
if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate)
if (likely(dpll1_rate != 0) && ptr->pll_rate != dpll1_rate)
continue;
/* Can check only after xtal frequency check */
......@@ -402,11 +243,13 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
else
omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
ck_dpll1.rate = ptr->pll_rate;
/* XXX Do we need to recalculate the tree below DPLL1 at this point? */
ck_dpll1_p->rate = ptr->pll_rate;
return 0;
}
static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
{
int dsor_exp;
u16 regval;
......@@ -426,7 +269,7 @@ static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
return 0;
}
static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
{
int dsor_exp = calc_dsor_exp(clk, rate);
if (dsor_exp < 0)
......@@ -436,7 +279,7 @@ static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
return clk->parent->rate / (1 << dsor_exp);
}
static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
{
int dsor_exp;
u16 regval;
......@@ -456,16 +299,19 @@ static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
return 0;
}
static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate)
long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
{
/* Find the highest supported frequency <= rate */
struct mpu_rate * ptr;
long highest_rate;
unsigned long ref_rate;
ref_rate = clk_get_rate(ck_ref_p);
highest_rate = -EINVAL;
for (ptr = rate_table; ptr->rate; ptr++) {
if (ptr->xtal != ck_ref.rate)
for (ptr = omap1_rate_table; ptr->rate; ptr++) {
if (ptr->xtal != ref_rate)
continue;
highest_rate = ptr->rate;
......@@ -500,8 +346,8 @@ static unsigned calc_ext_dsor(unsigned long rate)
return dsor;
}
/* Only needed on 1510 */
static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
/* XXX Only needed on 1510 */
int omap1_set_uart_rate(struct clk *clk, unsigned long rate)
{
unsigned int val;
......@@ -519,7 +365,7 @@ static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
}
/* External clock (MCLK & BCLK) functions */
static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate)
{
unsigned dsor;
__u16 ratio_bits;
......@@ -537,7 +383,7 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
return 0;
}
static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
{
u32 l;
int div;
......@@ -560,12 +406,12 @@ static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
return 0;
}
static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate)
long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate)
{
return 96000000 / calc_ext_dsor(rate);
}
static void omap1_init_ext_clk(struct clk * clk)
void omap1_init_ext_clk(struct clk *clk)
{
unsigned dsor;
__u16 ratio_bits;
......@@ -583,7 +429,7 @@ static void omap1_init_ext_clk(struct clk * clk)
clk-> rate = 96000000 / dsor;
}
static int omap1_clk_enable(struct clk *clk)
int omap1_clk_enable(struct clk *clk)
{
int ret = 0;
......@@ -611,7 +457,7 @@ static int omap1_clk_enable(struct clk *clk)
return ret;
}
static void omap1_clk_disable(struct clk *clk)
void omap1_clk_disable(struct clk *clk)
{
if (clk->usecount > 0 && !(--clk->usecount)) {
clk->ops->disable(clk);
......@@ -666,12 +512,70 @@ static void omap1_clk_disable_generic(struct clk *clk)
}
}
static const struct clkops clkops_generic = {
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
const struct clkops clkops_generic = {
.enable = omap1_clk_enable_generic,
.disable = omap1_clk_disable_generic,
};
static int omap1_clk_enable_dsp_domain(struct clk *clk)
{
int retval;
retval = omap1_clk_enable(api_ck_p);
if (!retval) {
retval = omap1_clk_enable_generic(clk);
omap1_clk_disable(api_ck_p);
}
return retval;
}
static void omap1_clk_disable_dsp_domain(struct clk *clk)
{
if (omap1_clk_enable(api_ck_p) == 0) {
omap1_clk_disable_generic(clk);
omap1_clk_disable(api_ck_p);
}
}
const struct clkops clkops_dspck = {
.enable = omap1_clk_enable_dsp_domain,
.disable = omap1_clk_disable_dsp_domain,
};
static int omap1_clk_enable_uart_functional(struct clk *clk)
{
int ret;
struct uart_clk *uclk;
ret = omap1_clk_enable_generic(clk);
if (ret == 0) {
/* Set smart idle acknowledgement mode */
uclk = (struct uart_clk *)clk;
omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8,
uclk->sysc_addr);
}
return ret;
}
static void omap1_clk_disable_uart_functional(struct clk *clk)
{
struct uart_clk *uclk;
/* Set force idle acknowledgement mode */
uclk = (struct uart_clk *)clk;
omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr);
omap1_clk_disable_generic(clk);
}
const struct clkops clkops_uart = {
.enable = omap1_clk_enable_uart_functional,
.disable = omap1_clk_disable_uart_functional,
};
static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
{
if (clk->flags & RATE_FIXED)
return clk->rate;
......@@ -682,7 +586,7 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
return clk->rate;
}
static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret = -EINVAL;
......@@ -697,7 +601,7 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
#ifdef CONFIG_OMAP_RESET_CLOCKS
static void __init omap1_clk_disable_unused(struct clk *clk)
void __init omap1_clk_disable_unused(struct clk *clk)
{
__u32 regval32;
......@@ -723,168 +627,4 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
printk(" done\n");
}
#else
#define omap1_clk_disable_unused NULL
#endif
static struct clk_functions omap1_clk_functions = {
.clk_enable = omap1_clk_enable,
.clk_disable = omap1_clk_disable,
.clk_round_rate = omap1_clk_round_rate,
.clk_set_rate = omap1_clk_set_rate,
.clk_disable_unused = omap1_clk_disable_unused,
};
int __init omap1_clk_init(void)
{
struct omap_clk *c;
const struct omap_clock_config *info;
int crystal_type = 0; /* Default 12 MHz */
u32 reg, cpu_mask;
#ifdef CONFIG_DEBUG_LL
/* Resets some clocks that may be left on from bootloader,
* but leaves serial clocks on.
*/
omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
#endif
/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
omap_writew(reg, SOFT_REQ_REG);
if (!cpu_is_omap15xx())
omap_writew(0, SOFT_REQ_REG2);
clk_init(&omap1_clk_functions);
/* By default all idlect1 clocks are allowed to idle */
arm_idlect1_mask = ~0;
for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
clk_preinit(c->lk.clk);
cpu_mask = 0;
if (cpu_is_omap16xx())
cpu_mask |= CK_16XX;
if (cpu_is_omap1510())
cpu_mask |= CK_1510;
if (cpu_is_omap7xx())
cpu_mask |= CK_7XX;
if (cpu_is_omap310())
cpu_mask |= CK_310;
for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
if (c->cpu & cpu_mask) {
clkdev_add(&c->lk);
clk_register(c->lk.clk);
}
info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
if (info != NULL) {
if (!cpu_is_omap15xx())
crystal_type = info->system_clock_type;
}
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
ck_ref.rate = 13000000;
#elif defined(CONFIG_ARCH_OMAP16XX)
if (crystal_type == 2)
ck_ref.rate = 19200000;
#endif
printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
omap_readw(ARM_CKCTL));
/* We want to be in syncronous scalable mode */
omap_writew(0x1000, ARM_SYSST);
#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
/* Use values set by bootloader. Determine PLL rate and recalculate
* dependent clocks as if kernel had changed PLL or divisors.
*/
{
unsigned pll_ctl_val = omap_readw(DPLL_CTL);
ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
if (pll_ctl_val & 0x10) {
/* PLL enabled, apply multiplier and divisor */
if (pll_ctl_val & 0xf80)
ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
} else {
/* PLL disabled, apply bypass divisor */
switch (pll_ctl_val & 0xc) {
case 0:
break;
case 0x4:
ck_dpll1.rate /= 2;
break;
default:
ck_dpll1.rate /= 4;
break;
}
}
}
#else
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
printk(KERN_ERR "System frequencies not set. Check your config.\n");
/* Guess sane values (60MHz) */
omap_writew(0x2290, DPLL_CTL);
omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
ck_dpll1.rate = 60000000;
}
#endif
propagate_rate(&ck_dpll1);
/* Cache rates for clocks connected to ck_ref (not dpll1) */
propagate_rate(&ck_ref);
printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
/* Select slicer output as OMAP input clock */
omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
#endif
/* Amstrad Delta wants BCLK high when inactive */
if (machine_is_ams_delta())
omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
(1 << SDW_MCLK_INV_BIT),
ULPD_CLOCK_CTRL);
/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
/* (on 730, bit 13 must not be cleared) */
if (cpu_is_omap7xx())
omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
else
omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
/* Put DSP/MPUI into reset until needed */
omap_writew(0, ARM_RSTCT1);
omap_writew(1, ARM_RSTCT2);
omap_writew(0x400, ARM_IDLECT1);
/*
* According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
* of the ARM_IDLECT2 register must be set to zero. The power-on
* default value of this bit is one.
*/
omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */
/*
* Only enable those clocks we will need, let the drivers
* enable other clocks as necessary
*/
clk_enable(&armper_ck.clk);
clk_enable(&armxor_ck.clk);
clk_enable(&armtim_ck.clk); /* This should be done by timer code */
if (cpu_is_omap15xx())
clk_enable(&arm_gpio_ck);
return 0;
}
arch/arm/mach-omap1/clock.h
View file @ 52650505
/*
* linux/arch/arm/mach-omap1/clock.h
*
* Copyright (C) 2004 - 2005 Nokia corporation
* Copyright (C) 2004 - 2005, 2009 Nokia corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
* Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
*
......@@ -13,30 +13,36 @@
#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
static unsigned long omap1_ckctl_recalc(struct clk *clk);
static unsigned long omap1_watchdog_recalc(struct clk *clk);
static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
static unsigned long omap1_sossi_recalc(struct clk *clk);
static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
static int omap1_set_uart_rate(struct clk * clk, unsigned long rate);
static unsigned long omap1_uart_recalc(struct clk *clk);
static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate);
static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate);
static void omap1_init_ext_clk(struct clk * clk);
static int omap1_select_table_rate(struct clk * clk, unsigned long rate);
static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate);
static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
struct mpu_rate {
unsigned long rate;
unsigned long xtal;
unsigned long pll_rate;
__u16 ckctl_val;
__u16 dpllctl_val;
};
#include <linux/clk.h>
#include <plat/clock.h>
extern int __init omap1_clk_init(void);
extern int omap1_clk_enable(struct clk *clk);
extern void omap1_clk_disable(struct clk *clk);
extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate);
extern unsigned long omap1_ckctl_recalc(struct clk *clk);
extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
extern unsigned long omap1_sossi_recalc(struct clk *clk);
extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate);
extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate);
extern unsigned long omap1_uart_recalc(struct clk *clk);
extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate);
extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate);
extern void omap1_init_ext_clk(struct clk *clk);
extern int omap1_select_table_rate(struct clk *clk, unsigned long rate);
extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate);
extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
extern unsigned long omap1_watchdog_recalc(struct clk *clk);
#ifdef CONFIG_OMAP_RESET_CLOCKS
extern void __init omap1_clk_disable_unused(struct clk *clk);
#else
#define omap1_clk_disable_unused NULL
#endif
struct uart_clk {
struct clk clk;
......@@ -96,611 +102,12 @@ struct arm_idlect1_clk {
#define SOFT_REQ_REG 0xfffe0834
#define SOFT_REQ_REG2 0xfffe0880
/*-------------------------------------------------------------------------
* Omap1 MPU rate table
*-------------------------------------------------------------------------*/
static struct mpu_rate rate_table[] = {
/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
* NOTE: Comment order here is different from bits in CKCTL value:
* armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
*/
#if defined(CONFIG_OMAP_ARM_216MHZ)
{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
#endif
#if defined(CONFIG_OMAP_ARM_195MHZ)
{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
#endif
#if defined(CONFIG_OMAP_ARM_192MHZ)
{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
{ 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
{ 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
{ 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
#endif
#if defined(CONFIG_OMAP_ARM_182MHZ)
{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
#endif
#if defined(CONFIG_OMAP_ARM_168MHZ)
{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
#endif
#if defined(CONFIG_OMAP_ARM_150MHZ)
{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
#endif
#if defined(CONFIG_OMAP_ARM_120MHZ)
{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
#endif
#if defined(CONFIG_OMAP_ARM_96MHZ)
{ 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
#endif
#if defined(CONFIG_OMAP_ARM_60MHZ)
{ 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
#endif
#if defined(CONFIG_OMAP_ARM_30MHZ)
{ 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
#endif
{ 0, 0, 0, 0, 0 },
};
/*-------------------------------------------------------------------------
* Omap1 clocks
*-------------------------------------------------------------------------*/
static struct clk ck_ref = {
.name = "ck_ref",
.ops = &clkops_null,
.rate = 12000000,
};
static struct clk ck_dpll1 = {
.name = "ck_dpll1",
.ops = &clkops_null,
.parent = &ck_ref,
};
/*
* FIXME: This clock seems to be necessary but no-one has asked for its
* activation. [ FIX: SoSSI, SSR ]
*/
static struct arm_idlect1_clk ck_dpll1out = {
.clk = {
.name = "ck_dpll1out",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT |
ENABLE_ON_INIT,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_CKOUT_ARM,
.recalc = &followparent_recalc,
},
.idlect_shift = 12,
};
static struct clk sossi_ck = {
.name = "ck_sossi",
.ops = &clkops_generic,
.parent = &ck_dpll1out.clk,
.flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
.enable_bit = 16,
.recalc = &omap1_sossi_recalc,
.set_rate = &omap1_set_sossi_rate,
};
static struct clk arm_ck = {
.name = "arm_ck",
.ops = &clkops_null,
.parent = &ck_dpll1,
.rate_offset = CKCTL_ARMDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct arm_idlect1_clk armper_ck = {
.clk = {
.name = "armper_ck",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = 2,
};
/*
* FIXME: This clock seems to be necessary but no-one has asked for its
* activation. [ GPIO code for 1510 ]
*/
static struct clk arm_gpio_ck = {
.name = "arm_gpio_ck",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.flags = ENABLE_ON_INIT,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_GPIOCK,
.recalc = &followparent_recalc,
};
static struct arm_idlect1_clk armxor_ck = {
.clk = {
.name = "armxor_ck",
.ops = &clkops_generic,
.parent = &ck_ref,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
},
.idlect_shift = 1,
};
static struct arm_idlect1_clk armtim_ck = {
.clk = {
.name = "armtim_ck",
.ops = &clkops_generic,
.parent = &ck_ref,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_TIMCK,
.recalc = &followparent_recalc,
},
.idlect_shift = 9,
};
static struct arm_idlect1_clk armwdt_ck = {
.clk = {
.name = "armwdt_ck",
.ops = &clkops_generic,
.parent = &ck_ref,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_WDTCK,
.recalc = &omap1_watchdog_recalc,
},
.idlect_shift = 0,
};
static struct clk arminth_ck16xx = {
.name = "arminth_ck",
.ops = &clkops_null,
.parent = &arm_ck,
.recalc = &followparent_recalc,
/* Note: On 16xx the frequency can be divided by 2 by programming
* ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
*
* 1510 version is in TC clocks.
*/
};
static struct clk dsp_ck = {
.name = "dsp_ck",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL),
.enable_bit = EN_DSPCK,
.rate_offset = CKCTL_DSPDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct clk dspmmu_ck = {
.name = "dspmmu_ck",
.ops = &clkops_null,
.parent = &ck_dpll1,
.rate_offset = CKCTL_DSPMMUDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct clk dspper_ck = {
.name = "dspper_ck",
.ops = &clkops_dspck,
.parent = &ck_dpll1,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
.recalc = &omap1_ckctl_recalc_dsp_domain,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = &omap1_clk_set_rate_dsp_domain,
};
static struct clk dspxor_ck = {
.name = "dspxor_ck",
.ops = &clkops_dspck,
.parent = &ck_ref,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
};
static struct clk dsptim_ck = {
.name = "dsptim_ck",
.ops = &clkops_dspck,
.parent = &ck_ref,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_DSPTIMCK,
.recalc = &followparent_recalc,
};
/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
static struct arm_idlect1_clk tc_ck = {
.clk = {
.name = "tc_ck",
.ops = &clkops_null,
.parent = &ck_dpll1,
.flags = CLOCK_IDLE_CONTROL,
.rate_offset = CKCTL_TCDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = 6,
};
static struct clk arminth_ck1510 = {
.name = "arminth_ck",
.ops = &clkops_null,
.parent = &tc_ck.clk,
.recalc = &followparent_recalc,
/* Note: On 1510 the frequency follows TC_CK
*
* 16xx version is in MPU clocks.
*/
};
static struct clk tipb_ck = {
/* No-idle controlled by "tc_ck" */
.name = "tipb_ck",
.ops = &clkops_null,
.parent = &tc_ck.clk,
.recalc = &followparent_recalc,
};
static struct clk l3_ocpi_ck = {
/* No-idle controlled by "tc_ck" */
.name = "l3_ocpi_ck",
.ops = &clkops_generic,
.parent = &tc_ck.clk,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_OCPI_CK,
.recalc = &followparent_recalc,
};
static struct clk tc1_ck = {
.name = "tc1_ck",
.ops = &clkops_generic,
.parent = &tc_ck.clk,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_TC1_CK,
.recalc = &followparent_recalc,
};
/*
* FIXME: This clock seems to be necessary but no-one has asked for its
* activation. [ pm.c (SRAM), CCP, Camera ]
*/
static struct clk tc2_ck = {
.name = "tc2_ck",
.ops = &clkops_generic,
.parent = &tc_ck.clk,
.flags = ENABLE_ON_INIT,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_TC2_CK,
.recalc = &followparent_recalc,
};
static struct clk dma_ck = {
/* No-idle controlled by "tc_ck" */
.name = "dma_ck",
.ops = &clkops_null,
.parent = &tc_ck.clk,
.recalc = &followparent_recalc,
};
static struct clk dma_lcdfree_ck = {
.name = "dma_lcdfree_ck",
.ops = &clkops_null,
.parent = &tc_ck.clk,
.recalc = &followparent_recalc,
};
static struct arm_idlect1_clk api_ck = {
.clk = {
.name = "api_ck",
.ops = &clkops_generic,
.parent = &tc_ck.clk,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_APICK,
.recalc = &followparent_recalc,
},
.idlect_shift = 8,
};
static struct arm_idlect1_clk lb_ck = {
.clk = {
.name = "lb_ck",
.ops = &clkops_generic,
.parent = &tc_ck.clk,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LBCK,
.recalc = &followparent_recalc,
},
.idlect_shift = 4,
};
static struct clk rhea1_ck = {
.name = "rhea1_ck",
.ops = &clkops_null,
.parent = &tc_ck.clk,
.recalc = &followparent_recalc,
};
static struct clk rhea2_ck = {
.name = "rhea2_ck",
.ops = &clkops_null,
.parent = &tc_ck.clk,
.recalc = &followparent_recalc,
};
static struct clk lcd_ck_16xx = {
.name = "lcd_ck",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct arm_idlect1_clk lcd_ck_1510 = {
.clk = {
.name = "lcd_ck",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = 3,
};
static struct clk uart1_1510 = {
.name = "uart1_ck",
.ops = &clkops_null,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 29, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
};
static struct uart_clk uart1_16xx = {
.clk = {
.name = "uart1_ck",
.ops = &clkops_uart,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = RATE_FIXED | ENABLE_REG_32BIT |
CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 29,
},
.sysc_addr = 0xfffb0054,
};
static struct clk uart2_ck = {
.name = "uart2_ck",
.ops = &clkops_null,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 30, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
};
static struct clk uart3_1510 = {
.name = "uart3_ck",
.ops = &clkops_null,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 31, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
};
extern __u32 arm_idlect1_mask;
extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
static struct uart_clk uart3_16xx = {
.clk = {
.name = "uart3_ck",
.ops = &clkops_uart,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = RATE_FIXED | ENABLE_REG_32BIT |
CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 31,
},
.sysc_addr = 0xfffb9854,
};
static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */
.name = "usb_clko",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 6000000,
.flags = RATE_FIXED | ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
.enable_bit = USB_MCLK_EN_BIT,
};
static struct clk usb_hhc_ck1510 = {
.name = "usb_hhc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
.flags = RATE_FIXED | ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = USB_HOST_HHC_UHOST_EN,
};
static struct clk usb_hhc_ck16xx = {
.name = "usb_hhc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
.flags = RATE_FIXED | ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
.enable_bit = 8 /* UHOST_EN */,
};
static struct clk usb_dc_ck = {
.name = "usb_dc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
.flags = RATE_FIXED,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 4,
};
static struct clk usb_dc_ck7xx = {
.name = "usb_dc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
.flags = RATE_FIXED,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 8,
};
static struct clk mclk_1510 = {
.name = "mclk",
.ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
.flags = RATE_FIXED,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 6,
};
static struct clk mclk_16xx = {
.name = "mclk",
.ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
.enable_bit = COM_ULPD_PLL_CLK_REQ,
.set_rate = &omap1_set_ext_clk_rate,
.round_rate = &omap1_round_ext_clk_rate,
.init = &omap1_init_ext_clk,
};
static struct clk bclk_1510 = {
.name = "bclk",
.ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
.flags = RATE_FIXED,
};
static struct clk bclk_16xx = {
.name = "bclk",
.ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
.enable_bit = SWD_ULPD_PLL_CLK_REQ,
.set_rate = &omap1_set_ext_clk_rate,
.round_rate = &omap1_round_ext_clk_rate,
.init = &omap1_init_ext_clk,
};
static struct clk mmc1_ck = {
.name = "mmc_ck",
.ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 23,
};
static struct clk mmc2_ck = {
.name = "mmc_ck",
.id = 1,
.ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 20,
};
static struct clk mmc3_ck = {
.name = "mmc_ck",
.id = 2,
.ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 12,
};
static struct clk virtual_ck_mpu = {
.name = "mpu",
.ops = &clkops_null,
.parent = &arm_ck, /* Is smarter alias for */
.recalc = &followparent_recalc,
.set_rate = &omap1_select_table_rate,
.round_rate = &omap1_round_to_table_rate,
};
/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
remains active during MPU idle whenever this is enabled */
static struct clk i2c_fck = {
.name = "i2c_fck",
.id = 1,
.ops = &clkops_null,
.flags = CLOCK_NO_IDLE_PARENT,
.parent = &armxor_ck.clk,
.recalc = &followparent_recalc,
};
static struct clk i2c_ick = {
.name = "i2c_ick",
.id = 1,
.ops = &clkops_null,
.flags = CLOCK_NO_IDLE_PARENT,
.parent = &armper_ck.clk,
.recalc = &followparent_recalc,
};
extern const struct clkops clkops_dspck;
extern const struct clkops clkops_dummy;
extern const struct clkops clkops_uart;
extern const struct clkops clkops_generic;
#endif
arch/arm/mach-omap1/clock_data.c 0 → 100644
View file @ 52650505
/*
* linux/arch/arm/mach-omap1/clock_data.c
*
* Copyright (C) 2004 - 2005, 2009 Nokia corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
* Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <asm/mach-types.h> /* for machine_is_* */
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/clkdev_omap.h>
#include <plat/usb.h> /* for OTG_BASE */
#include "clock.h"
/*------------------------------------------------------------------------
* Omap1 clocks
*-------------------------------------------------------------------------*/
/* XXX is this necessary? */
static struct clk dummy_ck = {
.name = "dummy",
.ops = &clkops_dummy,
.flags = RATE_FIXED,
};
static struct clk ck_ref = {
.name = "ck_ref",
.ops = &clkops_null,
.rate = 12000000,
};
static struct clk ck_dpll1 = {
.name = "ck_dpll1",
.ops = &clkops_null,
.parent = &ck_ref,
};
/*
* FIXME: This clock seems to be necessary but no-one has asked for its
* activation. [ FIX: SoSSI, SSR ]
*/
static struct arm_idlect1_clk ck_dpll1out = {
.clk = {
.name = "ck_dpll1out",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT |
ENABLE_ON_INIT,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_CKOUT_ARM,
.recalc = &followparent_recalc,
},
.idlect_shift = 12,
};
static struct clk sossi_ck = {
.name = "ck_sossi",
.ops = &clkops_generic,
.parent = &ck_dpll1out.clk,
.flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
.enable_bit = 16,
.recalc = &omap1_sossi_recalc,
.set_rate = &omap1_set_sossi_rate,
};
static struct clk arm_ck = {
.name = "arm_ck",
.ops = &clkops_null,
.parent = &ck_dpll1,
.rate_offset = CKCTL_ARMDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct arm_idlect1_clk armper_ck = {
.clk = {
.name = "armper_ck",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = 2,
};
/*
* FIXME: This clock seems to be necessary but no-one has asked for its
* activation. [ GPIO code for 1510 ]
*/
static struct clk arm_gpio_ck = {
.name = "arm_gpio_ck",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.flags = ENABLE_ON_INIT,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_GPIOCK,
.recalc = &followparent_recalc,
};
static struct arm_idlect1_clk armxor_ck = {
.clk = {
.name = "armxor_ck",
.ops = &clkops_generic,
.parent = &ck_ref,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
},
.idlect_shift = 1,
};
static struct arm_idlect1_clk armtim_ck = {
.clk = {
.name = "armtim_ck",
.ops = &clkops_generic,
.parent = &ck_ref,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_TIMCK,
.recalc = &followparent_recalc,
},
.idlect_shift = 9,
};
static struct arm_idlect1_clk armwdt_ck = {
.clk = {
.name = "armwdt_ck",
.ops = &clkops_generic,
.parent = &ck_ref,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_WDTCK,
.recalc = &omap1_watchdog_recalc,
},
.idlect_shift = 0,
};
static struct clk arminth_ck16xx = {
.name = "arminth_ck",
.ops = &clkops_null,
.parent = &arm_ck,
.recalc = &followparent_recalc,
/* Note: On 16xx the frequency can be divided by 2 by programming
* ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
*
* 1510 version is in TC clocks.
*/
};
static struct clk dsp_ck = {
.name = "dsp_ck",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL),
.enable_bit = EN_DSPCK,
.rate_offset = CKCTL_DSPDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct clk dspmmu_ck = {
.name = "dspmmu_ck",
.ops = &clkops_null,
.parent = &ck_dpll1,
.rate_offset = CKCTL_DSPMMUDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct clk dspper_ck = {
.name = "dspper_ck",
.ops = &clkops_dspck,
.parent = &ck_dpll1,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
.recalc = &omap1_ckctl_recalc_dsp_domain,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = &omap1_clk_set_rate_dsp_domain,
};
static struct clk dspxor_ck = {
.name = "dspxor_ck",
.ops = &clkops_dspck,
.parent = &ck_ref,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
};
static struct clk dsptim_ck = {
.name = "dsptim_ck",
.ops = &clkops_dspck,
.parent = &ck_ref,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_DSPTIMCK,
.recalc = &followparent_recalc,
};
/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
static struct arm_idlect1_clk tc_ck = {
.clk = {
.name = "tc_ck",
.ops = &clkops_null,
.parent = &ck_dpll1,
.flags = CLOCK_IDLE_CONTROL,
.rate_offset = CKCTL_TCDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = 6,
};
static struct clk arminth_ck1510 = {
.name = "arminth_ck",
.ops = &clkops_null,
.parent = &tc_ck.clk,
.recalc = &followparent_recalc,
/* Note: On 1510 the frequency follows TC_CK
*
* 16xx version is in MPU clocks.
*/
};
static struct clk tipb_ck = {
/* No-idle controlled by "tc_ck" */
.name = "tipb_ck",
.ops = &clkops_null,
.parent = &tc_ck.clk,
.recalc = &followparent_recalc,
};
static struct clk l3_ocpi_ck = {
/* No-idle controlled by "tc_ck" */
.name = "l3_ocpi_ck",
.ops = &clkops_generic,
.parent = &tc_ck.clk,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_OCPI_CK,
.recalc = &followparent_recalc,
};
static struct clk tc1_ck = {
.name = "tc1_ck",
.ops = &clkops_generic,
.parent = &tc_ck.clk,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_TC1_CK,
.recalc = &followparent_recalc,
};
/*
* FIXME: This clock seems to be necessary but no-one has asked for its
* activation. [ pm.c (SRAM), CCP, Camera ]
*/
static struct clk tc2_ck = {
.name = "tc2_ck",
.ops = &clkops_generic,
.parent = &tc_ck.clk,
.flags = ENABLE_ON_INIT,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_TC2_CK,
.recalc = &followparent_recalc,
};
static struct clk dma_ck = {
/* No-idle controlled by "tc_ck" */
.name = "dma_ck",
.ops = &clkops_null,
.parent = &tc_ck.clk,
.recalc = &followparent_recalc,
};
static struct clk dma_lcdfree_ck = {
.name = "dma_lcdfree_ck",
.ops = &clkops_null,
.parent = &tc_ck.clk,
.recalc = &followparent_recalc,
};
static struct arm_idlect1_clk api_ck = {
.clk = {
.name = "api_ck",
.ops = &clkops_generic,
.parent = &tc_ck.clk,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_APICK,
.recalc = &followparent_recalc,
},
.idlect_shift = 8,
};
static struct arm_idlect1_clk lb_ck = {
.clk = {
.name = "lb_ck",
.ops = &clkops_generic,
.parent = &tc_ck.clk,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LBCK,
.recalc = &followparent_recalc,
},
.idlect_shift = 4,
};
static struct clk rhea1_ck = {
.name = "rhea1_ck",
.ops = &clkops_null,
.parent = &tc_ck.clk,
.recalc = &followparent_recalc,
};
static struct clk rhea2_ck = {
.name = "rhea2_ck",
.ops = &clkops_null,
.parent = &tc_ck.clk,
.recalc = &followparent_recalc,
};
static struct clk lcd_ck_16xx = {
.name = "lcd_ck",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct arm_idlect1_clk lcd_ck_1510 = {
.clk = {
.name = "lcd_ck",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.flags = CLOCK_IDLE_CONTROL,
.enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = 3,
};
static struct clk uart1_1510 = {
.name = "uart1_ck",
.ops = &clkops_null,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 29, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
};
static struct uart_clk uart1_16xx = {
.clk = {
.name = "uart1_ck",
.ops = &clkops_uart,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = RATE_FIXED | ENABLE_REG_32BIT |
CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 29,
},
.sysc_addr = 0xfffb0054,
};
static struct clk uart2_ck = {
.name = "uart2_ck",
.ops = &clkops_null,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 30, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
};
static struct clk uart3_1510 = {
.name = "uart3_ck",
.ops = &clkops_null,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 31, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
};
static struct uart_clk uart3_16xx = {
.clk = {
.name = "uart3_ck",
.ops = &clkops_uart,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = RATE_FIXED | ENABLE_REG_32BIT |
CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 31,
},
.sysc_addr = 0xfffb9854,
};
static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */
.name = "usb_clko",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 6000000,
.flags = RATE_FIXED | ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
.enable_bit = USB_MCLK_EN_BIT,
};
static struct clk usb_hhc_ck1510 = {
.name = "usb_hhc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
.flags = RATE_FIXED | ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = USB_HOST_HHC_UHOST_EN,
};
static struct clk usb_hhc_ck16xx = {
.name = "usb_hhc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
.flags = RATE_FIXED | ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
.enable_bit = 8 /* UHOST_EN */,
};
static struct clk usb_dc_ck = {
.name = "usb_dc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
.flags = RATE_FIXED,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 4,
};
static struct clk usb_dc_ck7xx = {
.name = "usb_dc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
.flags = RATE_FIXED,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 8,
};
static struct clk mclk_1510 = {
.name = "mclk",
.ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
.flags = RATE_FIXED,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 6,
};
static struct clk mclk_16xx = {
.name = "mclk",
.ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
.enable_bit = COM_ULPD_PLL_CLK_REQ,
.set_rate = &omap1_set_ext_clk_rate,
.round_rate = &omap1_round_ext_clk_rate,
.init = &omap1_init_ext_clk,
};
static struct clk bclk_1510 = {
.name = "bclk",
.ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
.flags = RATE_FIXED,
};
static struct clk bclk_16xx = {
.name = "bclk",
.ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
.enable_bit = SWD_ULPD_PLL_CLK_REQ,
.set_rate = &omap1_set_ext_clk_rate,
.round_rate = &omap1_round_ext_clk_rate,
.init = &omap1_init_ext_clk,
};
static struct clk mmc1_ck = {
.name = "mmc_ck",
.ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 23,
};
static struct clk mmc2_ck = {
.name = "mmc_ck",
.id = 1,
.ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 20,
};
static struct clk mmc3_ck = {
.name = "mmc_ck",
.id = 2,
.ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 12,
};
static struct clk virtual_ck_mpu = {
.name = "mpu",
.ops = &clkops_null,
.parent = &arm_ck, /* Is smarter alias for */
.recalc = &followparent_recalc,
.set_rate = &omap1_select_table_rate,
.round_rate = &omap1_round_to_table_rate,
};
/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
remains active during MPU idle whenever this is enabled */
static struct clk i2c_fck = {
.name = "i2c_fck",
.id = 1,
.ops = &clkops_null,
.flags = CLOCK_NO_IDLE_PARENT,
.parent = &armxor_ck.clk,
.recalc = &followparent_recalc,
};
static struct clk i2c_ick = {
.name = "i2c_ick",
.id = 1,
.ops = &clkops_null,
.flags = CLOCK_NO_IDLE_PARENT,
.parent = &armper_ck.clk,
.recalc = &followparent_recalc,
};
/*
* clkdev integration
*/
static struct omap_clk omap_clks[] = {
/* non-ULPD clocks */
CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310),
/* CK_GEN1 clocks */
CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX),
CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX),
CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310),
CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX),
CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310),
CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310),
CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX),
/* CK_GEN2 clocks */
CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310),
/* CK_GEN3 clocks */
CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310),
CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX),
CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX),
CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX),
CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310),
CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX),
CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX),
CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX),
CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310),
/* ULPD clocks */
CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310),
CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX),
CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310),
CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX),
CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX),
CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX),
CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX),
CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310),
CLK(NULL, "mclk", &mclk_16xx, CK_16XX),
CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310),
CLK(NULL, "bclk", &bclk_16xx, CK_16XX),
CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310),
CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX),
CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX),
CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX),
/* Virtual clocks */
CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310),
CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310),
CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX),
CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310),
CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX),
CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310),
CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
};
/*
* init
*/
static struct clk_functions omap1_clk_functions __initdata = {
.clk_enable = omap1_clk_enable,
.clk_disable = omap1_clk_disable,
.clk_round_rate = omap1_clk_round_rate,
.clk_set_rate = omap1_clk_set_rate,
.clk_disable_unused = omap1_clk_disable_unused,
};
int __init omap1_clk_init(void)
{
struct omap_clk *c;
const struct omap_clock_config *info;
int crystal_type = 0; /* Default 12 MHz */
u32 reg, cpu_mask;
#ifdef CONFIG_DEBUG_LL
/*
* Resets some clocks that may be left on from bootloader,
* but leaves serial clocks on.
*/
omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
#endif
/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
omap_writew(reg, SOFT_REQ_REG);
if (!cpu_is_omap15xx())
omap_writew(0, SOFT_REQ_REG2);
clk_init(&omap1_clk_functions);
/* By default all idlect1 clocks are allowed to idle */
arm_idlect1_mask = ~0;
for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
clk_preinit(c->lk.clk);
cpu_mask = 0;
if (cpu_is_omap16xx())
cpu_mask |= CK_16XX;
if (cpu_is_omap1510())
cpu_mask |= CK_1510;
if (cpu_is_omap7xx())
cpu_mask |= CK_7XX;
if (cpu_is_omap310())
cpu_mask |= CK_310;
for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
if (c->cpu & cpu_mask) {
clkdev_add(&c->lk);
clk_register(c->lk.clk);
}
/* Pointers to these clocks are needed by code in clock.c */
api_ck_p = clk_get(NULL, "api_ck");
ck_dpll1_p = clk_get(NULL, "ck_dpll1");
ck_ref_p = clk_get(NULL, "ck_ref");
info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
if (info != NULL) {
if (!cpu_is_omap15xx())
crystal_type = info->system_clock_type;
}
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
ck_ref.rate = 13000000;
#elif defined(CONFIG_ARCH_OMAP16XX)
if (crystal_type == 2)
ck_ref.rate = 19200000;
#endif
pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: "
"0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
omap_readw(ARM_CKCTL));
/* We want to be in syncronous scalable mode */
omap_writew(0x1000, ARM_SYSST);
#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
/* Use values set by bootloader. Determine PLL rate and recalculate
* dependent clocks as if kernel had changed PLL or divisors.
*/
{
unsigned pll_ctl_val = omap_readw(DPLL_CTL);
ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
if (pll_ctl_val & 0x10) {
/* PLL enabled, apply multiplier and divisor */
if (pll_ctl_val & 0xf80)
ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
} else {
/* PLL disabled, apply bypass divisor */
switch (pll_ctl_val & 0xc) {
case 0:
break;
case 0x4:
ck_dpll1.rate /= 2;
break;
default:
ck_dpll1.rate /= 4;
break;
}
}
}
#else
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
printk(KERN_ERR "System frequencies not set. Check your config.\n");
/* Guess sane values (60MHz) */
omap_writew(0x2290, DPLL_CTL);
omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
ck_dpll1.rate = 60000000;
}
#endif
propagate_rate(&ck_dpll1);
/* Cache rates for clocks connected to ck_ref (not dpll1) */
propagate_rate(&ck_ref);
printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
/* Select slicer output as OMAP input clock */
omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
#endif
/* Amstrad Delta wants BCLK high when inactive */
if (machine_is_ams_delta())
omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
(1 << SDW_MCLK_INV_BIT),
ULPD_CLOCK_CTRL);
/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
/* (on 730, bit 13 must not be cleared) */
if (cpu_is_omap7xx())
omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
else
omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
/* Put DSP/MPUI into reset until needed */
omap_writew(0, ARM_RSTCT1);
omap_writew(1, ARM_RSTCT2);
omap_writew(0x400, ARM_IDLECT1);
/*
* According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
* of the ARM_IDLECT2 register must be set to zero. The power-on
* default value of this bit is one.
*/
omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */
/*
* Only enable those clocks we will need, let the drivers
* enable other clocks as necessary
*/
clk_enable(&armper_ck.clk);
clk_enable(&armxor_ck.clk);
clk_enable(&armtim_ck.clk); /* This should be done by timer code */
if (cpu_is_omap15xx())
clk_enable(&arm_gpio_ck);
return 0;
}
arch/arm/mach-omap1/io.c
View file @ 52650505
......@@ -18,7 +18,8 @@
#include <plat/mux.h>
#include <plat/tc.h>
extern int omap1_clk_init(void);
#include "clock.h"
extern void omap_check_revision(void);
extern void omap_sram_init(void);
extern void omapfb_reserve_sdram(void);
......
arch/arm/mach-omap1/opp.h 0 → 100644
View file @ 52650505
/*
* linux/arch/arm/mach-omap1/opp.h
*
* Copyright (C) 2004 - 2005 Nokia corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
* Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP1_OPP_H
#define __ARCH_ARM_MACH_OMAP1_OPP_H
#include <linux/types.h>
struct mpu_rate {
unsigned long rate;
unsigned long xtal;
unsigned long pll_rate;
__u16 ckctl_val;
__u16 dpllctl_val;
};
extern struct mpu_rate omap1_rate_table[];
#endif
arch/arm/mach-omap1/opp_data.c 0 → 100644
View file @ 52650505
/*
* linux/arch/arm/mach-omap1/opp_data.c
*
* Copyright (C) 2004 - 2005 Nokia corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
* Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "opp.h"
/*-------------------------------------------------------------------------
* Omap1 MPU rate table
*-------------------------------------------------------------------------*/
struct mpu_rate omap1_rate_table[] = {
/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
* NOTE: Comment order here is different from bits in CKCTL value:
* armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
*/
#if defined(CONFIG_OMAP_ARM_216MHZ)
{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
#endif
#if defined(CONFIG_OMAP_ARM_195MHZ)
{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
#endif
#if defined(CONFIG_OMAP_ARM_192MHZ)
{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
{ 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
{ 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
{ 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
#endif
#if defined(CONFIG_OMAP_ARM_182MHZ)
{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
#endif
#if defined(CONFIG_OMAP_ARM_168MHZ)
{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
#endif
#if defined(CONFIG_OMAP_ARM_150MHZ)
{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
#endif
#if defined(CONFIG_OMAP_ARM_120MHZ)
{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
#endif
#if defined(CONFIG_OMAP_ARM_96MHZ)
{ 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
#endif
#if defined(CONFIG_OMAP_ARM_60MHZ)
{ 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
#endif
#if defined(CONFIG_OMAP_ARM_30MHZ)
{ 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
#endif
{ 0, 0, 0, 0, 0 },
};
arch/arm/plat-omap/include/plat/clkdev_omap.h
View file @ 52650505
......@@ -11,7 +11,7 @@
#include <asm/clkdev.h>
struct omap_clk {
u32 cpu;
u16 cpu;
struct clk_lookup lk;
};
......@@ -26,11 +26,15 @@ struct omap_clk {
}
#define CK_243X (1 << 0)
#define CK_242X (1 << 1)
#define CK_343X (1 << 2)
#define CK_3430ES1 (1 << 3)
#define CK_3430ES2 (1 << 4)
#define CK_310 (1 << 0)
#define CK_7XX (1 << 1)
#define CK_1510 (1 << 2)
#define CK_16XX (1 << 3)
#define CK_243X (1 << 4)
#define CK_242X (1 << 5)
#define CK_343X (1 << 6)
#define CK_3430ES1 (1 << 7)
#define CK_3430ES2 (1 << 8)
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7