Commit 52ab4ac2 authored by Thomas Graf's avatar Thomas Graf Committed by Arnaldo Carvalho de Melo

[PKT_SCHED]: Rework QoS and/or fair queueing configuration

Make "QoS and/or fair queueing" have its own menu, it's too big to be
inlined into "Network options". Remove the obsolete NET_QOS option.
Automatically select NET_CLS if needed. Do the same for NET_ESTIMATOR
but allow it to be selected manually for statistical purposes. Add
comments to separate queueing from classification. Fix dependencies
and ordering of classifiers. Improve descriptions/help texts and
remove outdated pieces.
Signed-off-by: default avatarThomas Graf <tgraf@suug.ch>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@mandriva.com>
parent 979ad663
......@@ -2,13 +2,15 @@
# Traffic control configuration.
#
menuconfig NET_SCHED
menu "QoS and/or fair queueing"
config NET_SCHED
bool "QoS and/or fair queueing"
---help---
When the kernel has several packets to send out over a network
device, it has to decide which ones to send first, which ones to
delay, and which ones to drop. This is the job of the packet
scheduler, and several different algorithms for how to do this
delay, and which ones to drop. This is the job of the queueing
disciplines, several different algorithms for how to do this
"fairly" have been proposed.
If you say N here, you will get the standard packet scheduler, which
......@@ -23,13 +25,13 @@ menuconfig NET_SCHED
To administer these schedulers, you'll need the user-level utilities
from the package iproute2+tc at <ftp://ftp.tux.org/pub/net/ip-routing/>.
That package also contains some documentation; for more, check out
<http://snafu.freedom.org/linux2.2/iproute-notes.html>.
<http://linux-net.osdl.org/index.php/Iproute2>.
This Quality of Service (QoS) support will enable you to use
Differentiated Services (diffserv) and Resource Reservation Protocol
(RSVP) on your Linux router if you also say Y to "QoS support",
"Packet classifier API" and to some classifiers below. Documentation
and software is at <http://diffserv.sourceforge.net/>.
(RSVP) on your Linux router if you also say Y to the corresponding
classifiers below. Documentation and software is at
<http://diffserv.sourceforge.net/>.
If you say Y here and to "/proc file system" below, you will be able
to read status information about packet schedulers from the file
......@@ -42,7 +44,7 @@ choice
prompt "Packet scheduler clock source"
depends on NET_SCHED
default NET_SCH_CLK_JIFFIES
help
---help---
Packet schedulers need a monotonic clock that increments at a static
rate. The kernel provides several suitable interfaces, each with
different properties:
......@@ -56,7 +58,7 @@ choice
config NET_SCH_CLK_JIFFIES
bool "Timer interrupt"
help
---help---
Say Y here if you want to use the timer interrupt (jiffies) as clock
source. This clock source is fast, synchronized on all processors and
handles cpu clock frequency changes, but its resolution is too low
......@@ -64,7 +66,7 @@ config NET_SCH_CLK_JIFFIES
config NET_SCH_CLK_GETTIMEOFDAY
bool "gettimeofday"
help
---help---
Say Y here if you want to use gettimeofday as clock source. This clock
source has high resolution, is synchronized on all processors and
handles cpu clock frequency changes, but it is slow.
......@@ -77,7 +79,7 @@ config NET_SCH_CLK_GETTIMEOFDAY
config NET_SCH_CLK_CPU
bool "CPU cycle counter"
depends on ((X86_TSC || X86_64) && !SMP) || ALPHA || SPARC64 || PPC64 || IA64
help
---help---
Say Y here if you want to use the CPU's cycle counter as clock source.
This is a cheap and high resolution clock source, but on some
architectures it is not synchronized on all processors and doesn't
......@@ -95,134 +97,129 @@ config NET_SCH_CLK_CPU
endchoice
comment "Queueing/Scheduling"
depends on NET_SCHED
config NET_SCH_CBQ
tristate "CBQ packet scheduler"
tristate "Class Based Queueing (CBQ)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Class-Based Queueing (CBQ) packet
scheduling algorithm for some of your network devices. This
algorithm classifies the waiting packets into a tree-like hierarchy
of classes; the leaves of this tree are in turn scheduled by
separate algorithms (called "disciplines" in this context).
scheduling algorithm. This algorithm classifies the waiting packets
into a tree-like hierarchy of classes; the leaves of this tree are
in turn scheduled by separate algorithms.
See the top of <file:net/sched/sch_cbq.c> for references about the
CBQ algorithm.
See the top of <file:net/sched/sch_cbq.c> for more details.
CBQ is a commonly used scheduler, so if you're unsure, you should
say Y here. Then say Y to all the queueing algorithms below that you
want to use as CBQ disciplines. Then say Y to "Packet classifier
API" and say Y to all the classifiers you want to use; a classifier
is a routine that allows you to sort your outgoing traffic into
classes based on a certain criterion.
want to use as leaf disciplines.
To compile this code as a module, choose M here: the
module will be called sch_cbq.
config NET_SCH_HTB
tristate "HTB packet scheduler"
tristate "Hierarchical Token Bucket (HTB)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Hierarchical Token Buckets (HTB)
packet scheduling algorithm for some of your network devices. See
packet scheduling algorithm. See
<http://luxik.cdi.cz/~devik/qos/htb/> for complete manual and
in-depth articles.
HTB is very similar to the CBQ regarding its goals however is has
HTB is very similar to CBQ regarding its goals however is has
different properties and different algorithm.
To compile this code as a module, choose M here: the
module will be called sch_htb.
config NET_SCH_HFSC
tristate "HFSC packet scheduler"
tristate "Hierarchical Fair Service Curve (HFSC)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Hierarchical Fair Service Curve
(HFSC) packet scheduling algorithm for some of your network devices.
(HFSC) packet scheduling algorithm.
To compile this code as a module, choose M here: the
module will be called sch_hfsc.
#tristate ' H-PFQ packet scheduler' CONFIG_NET_SCH_HPFQ
config NET_SCH_ATM
tristate "ATM pseudo-scheduler"
tristate "ATM Virtual Circuits (ATM)"
depends on NET_SCHED && ATM
---help---
Say Y here if you want to use the ATM pseudo-scheduler. This
provides a framework for invoking classifiers (aka "filters"), which
in turn select classes of this queuing discipline. Each class maps
the flow(s) it is handling to a given virtual circuit (see the top of
<file:net/sched/sch_atm.c>).
provides a framework for invoking classifiers, which in turn
select classes of this queuing discipline. Each class maps
the flow(s) it is handling to a given virtual circuit.
See the top of <file:net/sched/sch_atm.c>) for more details.
To compile this code as a module, choose M here: the
module will be called sch_atm.
config NET_SCH_PRIO
tristate "The simplest PRIO pseudoscheduler"
tristate "Multi Band Priority Queueing (PRIO)"
depends on NET_SCHED
help
---help---
Say Y here if you want to use an n-band priority queue packet
"scheduler" for some of your network devices or as a leaf discipline
for the CBQ scheduling algorithm. If unsure, say Y.
scheduler.
To compile this code as a module, choose M here: the
module will be called sch_prio.
config NET_SCH_RED
tristate "RED queue"
tristate "Random Early Detection (RED)"
depends on NET_SCHED
help
---help---
Say Y here if you want to use the Random Early Detection (RED)
packet scheduling algorithm for some of your network devices (see
the top of <file:net/sched/sch_red.c> for details and references
about the algorithm).
packet scheduling algorithm.
See the top of <file:net/sched/sch_red.c> for more details.
To compile this code as a module, choose M here: the
module will be called sch_red.
config NET_SCH_SFQ
tristate "SFQ queue"
tristate "Stochastic Fairness Queueing (SFQ)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
packet scheduling algorithm for some of your network devices or as a
leaf discipline for the CBQ scheduling algorithm (see the top of
<file:net/sched/sch_sfq.c> for details and references about the SFQ
algorithm).
packet scheduling algorithm .
See the top of <file:net/sched/sch_sfq.c> for more details.
To compile this code as a module, choose M here: the
module will be called sch_sfq.
config NET_SCH_TEQL
tristate "TEQL queue"
tristate "True Link Equalizer (TEQL)"
depends on NET_SCHED
---help---
Say Y here if you want to use the True Link Equalizer (TLE) packet
scheduling algorithm for some of your network devices or as a leaf
discipline for the CBQ scheduling algorithm. This queueing
discipline allows the combination of several physical devices into
one virtual device. (see the top of <file:net/sched/sch_teql.c> for
details).
scheduling algorithm. This queueing discipline allows the combination
of several physical devices into one virtual device.
See the top of <file:net/sched/sch_teql.c> for more details.
To compile this code as a module, choose M here: the
module will be called sch_teql.
config NET_SCH_TBF
tristate "TBF queue"
tristate "Token Bucket Filter (TBF)"
depends on NET_SCHED
help
Say Y here if you want to use the Simple Token Bucket Filter (TBF)
packet scheduling algorithm for some of your network devices or as a
leaf discipline for the CBQ scheduling algorithm (see the top of
<file:net/sched/sch_tbf.c> for a description of the TBF algorithm).
---help---
Say Y here if you want to use the Token Bucket Filter (TBF) packet
scheduling algorithm.
See the top of <file:net/sched/sch_tbf.c> for more details.
To compile this code as a module, choose M here: the
module will be called sch_tbf.
config NET_SCH_GRED
tristate "GRED queue"
tristate "Generic Random Early Detection (GRED)"
depends on NET_SCHED
help
---help---
Say Y here if you want to use the Generic Random Early Detection
(GRED) packet scheduling algorithm for some of your network devices
(see the top of <file:net/sched/sch_red.c> for details and
......@@ -232,9 +229,9 @@ config NET_SCH_GRED
module will be called sch_gred.
config NET_SCH_DSMARK
tristate "Diffserv field marker"
tristate "Differentiated Services marker (DSMARK)"
depends on NET_SCHED
help
---help---
Say Y if you want to schedule packets according to the
Differentiated Services architecture proposed in RFC 2475.
Technical information on this method, with pointers to associated
......@@ -244,9 +241,9 @@ config NET_SCH_DSMARK
module will be called sch_dsmark.
config NET_SCH_NETEM
tristate "Network emulator"
tristate "Network emulator (NETEM)"
depends on NET_SCHED
help
---help---
Say Y if you want to emulate network delay, loss, and packet
re-ordering. This is often useful to simulate networks when
testing applications or protocols.
......@@ -259,58 +256,23 @@ config NET_SCH_NETEM
config NET_SCH_INGRESS
tristate "Ingress Qdisc"
depends on NET_SCHED
help
If you say Y here, you will be able to police incoming bandwidth
and drop packets when this bandwidth exceeds your desired rate.
---help---
Say Y here if you want to use classifiers for incoming packets.
If unsure, say Y.
To compile this code as a module, choose M here: the
module will be called sch_ingress.
config NET_QOS
bool "QoS support"
comment "Classification"
depends on NET_SCHED
---help---
Say Y here if you want to include Quality Of Service scheduling
features, which means that you will be able to request certain
rate-of-flow limits for your network devices.
This Quality of Service (QoS) support will enable you to use
Differentiated Services (diffserv) and Resource Reservation Protocol
(RSVP) on your Linux router if you also say Y to "Packet classifier
API" and to some classifiers below. Documentation and software is at
<http://diffserv.sourceforge.net/>.
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about QoS support.
config NET_ESTIMATOR
bool "Rate estimator"
depends on NET_QOS
help
In order for Quality of Service scheduling to work, the current
rate-of-flow for a network device has to be estimated; if you say Y
here, the kernel will do just that.
config NET_CLS
bool "Packet classifier API"
depends on NET_SCHED
---help---
The CBQ scheduling algorithm requires that network packets which are
scheduled to be sent out over a network device be classified
according to some criterion. If you say Y here, you will get a
choice of several different packet classifiers with the following
questions.
This will enable you to use Differentiated Services (diffserv) and
Resource Reservation Protocol (RSVP) on your Linux router.
Documentation and software is at
<http://diffserv.sourceforge.net/>.
boolean
config NET_CLS_BASIC
tristate "Basic classifier"
depends on NET_CLS
tristate "Elementary classification (BASIC)"
depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to be able to classify packets using
only extended matches and actions.
......@@ -319,24 +281,25 @@ config NET_CLS_BASIC
module will be called cls_basic.
config NET_CLS_TCINDEX
tristate "TC index classifier"
depends on NET_CLS
help
If you say Y here, you will be able to classify outgoing packets
according to the tc_index field of the skb. You will want this
feature if you want to implement Differentiated Services using
sch_dsmark. If unsure, say Y.
tristate "Traffic-Control Index (TCINDEX)"
depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to be able to classify packets based on
traffic control indices. You will want this feature if you want
to implement Differentiated Services together with DSMARK.
To compile this code as a module, choose M here: the
module will be called cls_tcindex.
config NET_CLS_ROUTE4
tristate "Routing table based classifier"
depends on NET_CLS
tristate "Routing decision (ROUTE)"
depends NET_SCHED
select NET_CLS_ROUTE
help
If you say Y here, you will be able to classify outgoing packets
according to the route table entry they matched. If unsure, say Y.
select NET_CLS
---help---
If you say Y here, you will be able to classify packets
according to the route table entry they matched.
To compile this code as a module, choose M here: the
module will be called cls_route.
......@@ -346,58 +309,45 @@ config NET_CLS_ROUTE
default n
config NET_CLS_FW
tristate "Firewall based classifier"
depends on NET_CLS
help
If you say Y here, you will be able to classify outgoing packets
according to firewall criteria you specified.
tristate "Netfilter mark (FW)"
depends NET_SCHED
select NET_CLS
---help---
If you say Y here, you will be able to classify packets
according to netfilter/firewall marks.
To compile this code as a module, choose M here: the
module will be called cls_fw.
config NET_CLS_U32
tristate "U32 classifier"
depends on NET_CLS
help
If you say Y here, you will be able to classify outgoing packets
according to their destination address. If unsure, say Y.
tristate "Universal 32bit comparisons w/ hashing (U32)"
depends NET_SCHED
select NET_CLS
---help---
Say Y here to be able to classify packetes using a universal
32bit pieces based comparison scheme.
To compile this code as a module, choose M here: the
module will be called cls_u32.
config CLS_U32_PERF
bool "U32 classifier performance counters"
bool "Performance counters support"
depends on NET_CLS_U32
help
gathers stats that could be used to tune u32 classifier performance.
Requires a new iproute2
You MUST NOT turn this on if you dont have an update iproute2.
config NET_CLS_IND
bool "classify input device (slows things u32/fw) "
depends on NET_CLS_U32 || NET_CLS_FW
help
This option will be killed eventually when a
metadata action appears because it slows things a little
Available only for u32 and fw classifiers.
Requires a new iproute2
You MUST NOT turn this on if you dont have an update iproute2.
---help---
Say Y here to make u32 gather additional statistics useful for
fine tuning u32 classifiers.
config CLS_U32_MARK
bool "Use nfmark as a key in U32 classifier"
bool "Netfilter marks support"
depends on NET_CLS_U32 && NETFILTER
help
This allows you to match mark in a u32 filter.
Example:
tc filter add dev eth0 protocol ip parent 1:0 prio 5 u32 \
match mark 0x0090 0xffff \
match ip dst 4.4.4.4 \
flowid 1:90
You must use a new iproute2 to use this feature.
---help---
Say Y here to be able to use netfilter marks as u32 key.
config NET_CLS_RSVP
tristate "Special RSVP classifier"
depends on NET_CLS && NET_QOS
tristate "IPv4 Resource Reservation Protocol (RSVP)"
depends on NET_SCHED
select NET_CLS
select NET_ESTIMATOR
---help---
The Resource Reservation Protocol (RSVP) permits end systems to
request a minimum and maximum data flow rate for a connection; this
......@@ -410,31 +360,33 @@ config NET_CLS_RSVP
module will be called cls_rsvp.
config NET_CLS_RSVP6
tristate "Special RSVP classifier for IPv6"
depends on NET_CLS && NET_QOS
tristate "IPv6 Resource Reservation Protocol (RSVP6)"
depends on NET_SCHED
select NET_CLS
select NET_ESTIMATOR
---help---
The Resource Reservation Protocol (RSVP) permits end systems to
request a minimum and maximum data flow rate for a connection; this
is important for real time data such as streaming sound or video.
Say Y here if you want to be able to classify outgoing packets based
on their RSVP requests and you are using the new Internet Protocol
IPv6 as opposed to the older and more common IPv4.
on their RSVP requests and you are using the IPv6.
To compile this code as a module, choose M here: the
module will be called cls_rsvp6.
config NET_EMATCH
bool "Extended Matches"
depends on NET_CLS
depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to use extended matches on top of classifiers
and select the extended matches below.
Extended matches are small classification helpers not worth writing
a separate classifier.
a separate classifier for.
You must have a recent version of the iproute2 tools in order to use
A recent version of the iproute2 package is required to use
extended matches.
config NET_EMATCH_STACK
......@@ -468,7 +420,7 @@ config NET_EMATCH_NBYTE
module will be called em_nbyte.
config NET_EMATCH_U32
tristate "U32 hashing key"
tristate "U32 key"
depends on NET_EMATCH
---help---
Say Y here if you want to be able to classify packets using
......@@ -496,76 +448,120 @@ config NET_EMATCH_TEXT
select TEXTSEARCH_BM
select TEXTSEARCH_FSM
---help---
Say Y here if you want to be ablt to classify packets based on
Say Y here if you want to be able to classify packets based on
textsearch comparisons.
To compile this code as a module, choose M here: the
module will be called em_text.
config NET_CLS_ACT
bool "Packet ACTION"
depends on EXPERIMENTAL && NET_CLS && NET_QOS
bool "Actions"
depends on EXPERIMENTAL && NET_SCHED
select NET_ESTIMATOR
---help---
This option requires you have a new iproute2. It enables
tc extensions which can be used with tc classifiers.
You MUST NOT turn this on if you dont have an update iproute2.
Say Y here if you want to use traffic control actions. Actions
get attached to classifiers and are invoked after a successful
classification. They are used to overwrite the classification
result, instantly drop or redirect packets, etc.
A recent version of the iproute2 package is required to use
extended matches.
config NET_ACT_POLICE
tristate "Policing Actions"
tristate "Traffic Policing"
depends on NET_CLS_ACT
---help---
If you are using a newer iproute2 select this one, otherwise use one
below to select a policer.
You MUST NOT turn this on if you dont have an update iproute2.
Say Y here if you want to do traffic policing, i.e. strict
bandwidth limiting. This action replaces the existing policing
module.
To compile this code as a module, choose M here: the
module will be called police.
config NET_ACT_GACT
tristate "generic Actions"
tristate "Generic actions"
depends on NET_CLS_ACT
---help---
You must have new iproute2 to use this feature.
This adds simple filtering actions like drop, accept etc.
Say Y here to take generic actions such as dropping and
accepting packets.
To compile this code as a module, choose M here: the
module will be called gact.
config GACT_PROB
bool "generic Actions probability"
bool "Probability support"
depends on NET_ACT_GACT
---help---
Allows generic actions to be randomly or deterministically used.
Say Y here to use the generic action randomly or deterministically.
config NET_ACT_MIRRED
tristate "Packet In/Egress redirecton/mirror Actions"
tristate "Redirecting and Mirroring"
depends on NET_CLS_ACT
---help---
requires new iproute2
This allows packets to be mirrored or redirected to netdevices
Say Y here to allow packets to be mirrored or redirected to
other devices.
To compile this code as a module, choose M here: the
module will be called mirred.
config NET_ACT_IPT
tristate "iptables Actions"
tristate "IPtables targets"
depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
---help---
requires new iproute2
This allows iptables targets to be used by tc filters
Say Y here to be able to invoke iptables targets after succesful
classification.
To compile this code as a module, choose M here: the
module will be called ipt.
config NET_ACT_PEDIT
tristate "Generic Packet Editor Actions"
tristate "Packet Editing"
depends on NET_CLS_ACT
---help---
requires new iproute2
This allows for packets to be generically edited
Say Y here if you want to mangle the content of packets.
config NET_CLS_POLICE
bool "Traffic policing (needed for in/egress)"
depends on NET_CLS && NET_QOS && NET_CLS_ACT!=y
help
Say Y to support traffic policing (bandwidth limits). Needed for
ingress and egress rate limiting.
To compile this code as a module, choose M here: the
module will be called pedit.
config NET_ACT_SIMP
tristate "Simple action"
tristate "Simple Example (Debug)"
depends on NET_CLS_ACT
---help---
You must have new iproute2 to use this feature.
This adds a very simple action for demonstration purposes
The idea is to give action authors a basic example to look at.
All this action will do is print on the console the configured
policy string followed by _ then packet count.
Say Y here to add a simple action for demonstration purposes.
It is meant as an example and for debugging purposes. It will
print a configured policy string followed by the packet count
to the console for every packet that passes by.
If unsure, say N.
To compile this code as a module, choose M here: the
module will be called simple.
config NET_CLS_POLICE
bool "Traffic Policing (obsolete)"
depends on NET_SCHED && NET_CLS_ACT!=y
select NET_ESTIMATOR
---help---
Say Y here if you want to do traffic policing, i.e. strict
bandwidth limiting. This option is obsoleted by the traffic
policer implemented as action, it stays here for compatibility
reasons.
config NET_CLS_IND
bool "Incoming device classification"
depends on NET_SCHED && (NET_CLS_U32 || NET_CLS_FW)
---help---
Say Y here to extend the u32 and fw classifier to support
classification based on the incoming device. This option is
likely to disappear in favour of the metadata ematch.
config NET_ESTIMATOR
bool "Rate estimator"
depends on NET_SCHED
---help---
Say Y here to allow using rate estimators to estimate the current
rate-of-flow for network devices, queues, etc. This module is
automaticaly selected if needed but can be selected manually for
statstical purposes.
endmenu
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment