Commit 52b9fa36 authored by Ben Hutchings's avatar Ben Hutchings Committed by David S. Miller

sh_eth: Fix DMA-API usage for RX buffers

- Use the return value of dma_map_single(), rather than calling
  virt_to_page() separately
- Check for mapping failue
- Call dma_unmap_single() rather than dma_sync_single_for_cpu()
Signed-off-by: default avatarBen Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent aa3933b8
......@@ -1123,6 +1123,7 @@ static void sh_eth_ring_format(struct net_device *ndev)
int rx_ringsize = sizeof(*rxdesc) * mdp->num_rx_ring;
int tx_ringsize = sizeof(*txdesc) * mdp->num_tx_ring;
int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN - 1;
dma_addr_t dma_addr;
mdp->cur_rx = 0;
mdp->cur_tx = 0;
......@@ -1136,7 +1137,6 @@ static void sh_eth_ring_format(struct net_device *ndev)
/* skb */
mdp->rx_skbuff[i] = NULL;
skb = netdev_alloc_skb(ndev, skbuff_size);
mdp->rx_skbuff[i] = skb;
if (skb == NULL)
break;
sh_eth_set_receive_align(skb);
......@@ -1145,9 +1145,15 @@ static void sh_eth_ring_format(struct net_device *ndev)
rxdesc = &mdp->rx_ring[i];
/* The size of the buffer is a multiple of 16 bytes. */
rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
dma_map_single(&ndev->dev, skb->data, rxdesc->buffer_length,
dma_addr = dma_map_single(&ndev->dev, skb->data,
rxdesc->buffer_length,
DMA_FROM_DEVICE);
rxdesc->addr = virt_to_phys(skb->data);
if (dma_mapping_error(&ndev->dev, dma_addr)) {
kfree_skb(skb);
break;
}
mdp->rx_skbuff[i] = skb;
rxdesc->addr = dma_addr;
rxdesc->status = cpu_to_edmac(mdp, RD_RACT | RD_RFP);
/* Rx descriptor address set */
......@@ -1432,6 +1438,7 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
u16 pkt_len = 0;
u32 desc_status;
int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN - 1;
dma_addr_t dma_addr;
boguscnt = min(boguscnt, *quota);
limit = boguscnt;
......@@ -1479,7 +1486,7 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
mdp->rx_skbuff[entry] = NULL;
if (mdp->cd->rpadir)
skb_reserve(skb, NET_IP_ALIGN);
dma_sync_single_for_cpu(&ndev->dev, rxdesc->addr,
dma_unmap_single(&ndev->dev, rxdesc->addr,
ALIGN(mdp->rx_buf_sz, 16),
DMA_FROM_DEVICE);
skb_put(skb, pkt_len);
......@@ -1501,15 +1508,20 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
if (mdp->rx_skbuff[entry] == NULL) {
skb = netdev_alloc_skb(ndev, skbuff_size);
mdp->rx_skbuff[entry] = skb;
if (skb == NULL)
break; /* Better luck next round. */
sh_eth_set_receive_align(skb);
dma_map_single(&ndev->dev, skb->data,
rxdesc->buffer_length, DMA_FROM_DEVICE);
dma_addr = dma_map_single(&ndev->dev, skb->data,
rxdesc->buffer_length,
DMA_FROM_DEVICE);
if (dma_mapping_error(&ndev->dev, dma_addr)) {
kfree_skb(skb);
break;
}
mdp->rx_skbuff[entry] = skb;
skb_checksum_none_assert(skb);
rxdesc->addr = virt_to_phys(skb->data);
rxdesc->addr = dma_addr;
}
if (entry >= mdp->num_rx_ring - 1)
rxdesc->status |=
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment