Commit 52be9464 authored by Mika Westerberg's avatar Mika Westerberg Committed by Bjorn Helgaas

PCI/portdrv: Resume upon exit from system suspend if left runtime suspended

Currently we try to keep PCIe ports runtime suspended over system suspend
if possible. This mostly happens when entering suspend-to-idle because
there is no need to re-configure wake settings.

This causes problems if the parent port goes into D3cold and it gets
resumed upon exit from system suspend. This may happen for example if the
port is part of PCIe switch and the same switch is connected to a PCIe
endpoint that needs to be resumed. The way exit from D3cold works according
PCIe 4.0 spec 5.3.1.4.2 is that power is restored and cold reset is
signaled. After this the device is in D0unitialized state keeping PME
context if it supports wake from D3cold.

The problem occurs when a PCIe hotplug port is left suspended and the
parent port goes into D3cold and back to D0: the port keeps its PME context
but since everything else is reset back to defaults (D0unitialized) it is
not set to detect hotplug events anymore.

For this reason change the PCIe portdrv power management logic so that it
is fine to keep the port runtime suspended over system suspend but it needs
to be resumed upon exit to make sure it gets properly re-initialized.
Signed-off-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
parent 720d6a67
......@@ -109,8 +109,8 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
pci_save_state(dev);
dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_SMART_SUSPEND |
DPM_FLAG_LEAVE_SUSPENDED);
dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NEVER_SKIP |
DPM_FLAG_SMART_SUSPEND);
if (pci_bridge_d3_possible(dev)) {
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment