Merge tag 'powerpc-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 - Handle RTAS delay requests in configure_bridge from Russell Currey
 - Refactor the configure_bridge RTAS tokens from Russell Currey
 - Fix definition of SIAR and SDAR registers from Thomas Huth
 - Use privileged SPR number for MMCR2 from Thomas Huth
 - Update LPCR only if it is powernv from Aneesh Kumar K.V
 - Fix the reference bit update when handling hash fault from Aneesh
   Kumar K.V
 - Add missing tlb flush from Aneesh Kumar K.V
 - Add POWER8NVL support to ibm,client-architecture-support call from
   Thomas Huth

* tag 'powerpc-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call
  powerpc/mm/radix: Add missing tlb flush
  powerpc/mm/hash: Fix the reference bit update when handling hash fault
  powerpc/mm/radix: Update LPCR only if it is powernv
  powerpc: Use privileged SPR number for MMCR2
  powerpc: Fix definition of SIAR and SDAR registers
  powerpc/pseries/eeh: Refactor the configure_bridge RTAS tokens
  powerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge

arch/powerpc/include/asm/reg.h

@@ -717,7 +717,7 @@
 #define   MMCR0_FCWAIT	0x00000002UL /* freeze counter in WAIT state */
 #define   MMCR0_FCHV	0x00000001UL /* freeze conditions in hypervisor mode */
 #define SPRN_MMCR1	798
-#define SPRN_MMCR2	769
+#define SPRN_MMCR2	785
 #define SPRN_MMCRA	0x312
 #define   MMCRA_SDSYNC	0x80000000UL /* SDAR synced with SIAR */
 #define   MMCRA_SDAR_DCACHE_MISS 0x40000000UL
@@ -754,13 +754,13 @@
 #define SPRN_PMC6	792
 #define SPRN_PMC7	793
 #define SPRN_PMC8	794
-#define SPRN_SIAR	780
-#define SPRN_SDAR	781
 #define SPRN_SIER	784
 #define   SIER_SIPR		0x2000000	/* Sampled MSR_PR */
 #define   SIER_SIHV		0x1000000	/* Sampled MSR_HV */
 #define   SIER_SIAR_VALID	0x0400000	/* SIAR contents valid */
 #define   SIER_SDAR_VALID	0x0200000	/* SDAR contents valid */
+#define SPRN_SIAR	796
+#define SPRN_SDAR	797
 #define SPRN_TACR	888
 #define SPRN_TCSCR	889
 #define SPRN_CSIGR	890

arch/powerpc/kernel/prom_init.c

@@ -656,6 +656,7 @@ unsigned char ibm_architecture_vec[] = {
 	W(0xffff0000), W(0x003e0000),	/* POWER6 */
 	W(0xffff0000), W(0x003f0000),	/* POWER7 */
 	W(0xffff0000), W(0x004b0000),	/* POWER8E */
+	W(0xffff0000), W(0x004c0000),   /* POWER8NVL */
 	W(0xffff0000), W(0x004d0000),	/* POWER8 */
 	W(0xffffffff), W(0x0f000004),	/* all 2.07-compliant */
 	W(0xffffffff), W(0x0f000003),	/* all 2.06-compliant */

arch/powerpc/mm/hash_utils_64.c

@@ -159,6 +159,19 @@ static struct mmu_psize_def mmu_psize_defaults_gp[] = {
 	},
 };
 
+/*
+ * 'R' and 'C' update notes:
+ *  - Under pHyp or KVM, the updatepp path will not set C, thus it *will*
+ *     create writeable HPTEs without C set, because the hcall H_PROTECT
+ *     that we use in that case will not update C
+ *  - The above is however not a problem, because we also don't do that
+ *     fancy "no flush" variant of eviction and we use H_REMOVE which will
+ *     do the right thing and thus we don't have the race I described earlier
+ *
+ *    - Under bare metal,  we do have the race, so we need R and C set
+ *    - We make sure R is always set and never lost
+ *    - C is _PAGE_DIRTY, and *should* always be set for a writeable mapping
+ */
 unsigned long htab_convert_pte_flags(unsigned long pteflags)
 {
 	unsigned long rflags = 0;
@@ -186,9 +199,14 @@ unsigned long htab_convert_pte_flags(unsigned long pteflags)
 			rflags |= 0x1;
 	}
 	/*
-	 * Always add "C" bit for perf. Memory coherence is always enabled
+	 * We can't allow hardware to update hpte bits. Hence always
+	 * set 'R' bit and set 'C' if it is a write fault
+	 * Memory coherence is always enabled
 	 */
-	rflags |=  HPTE_R_C | HPTE_R_M;
+	rflags |=  HPTE_R_R | HPTE_R_M;
+
+	if (pteflags & _PAGE_DIRTY)
+		rflags |= HPTE_R_C;
 	/*
 	 * Add in WIG bits
 	 */

arch/powerpc/mm/pgtable-book3s64.c

@@ -33,10 +33,7 @@ int pmdp_set_access_flags(struct vm_area_struct *vma, unsigned long address,
 	changed = !pmd_same(*(pmdp), entry);
 	if (changed) {
 		__ptep_set_access_flags(pmdp_ptep(pmdp), pmd_pte(entry));
-		/*
-		 * Since we are not supporting SW TLB systems, we don't
-		 * have any thing similar to flush_tlb_page_nohash()
-		 */
+		flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
 	}
 	return changed;
 }

arch/powerpc/mm/pgtable-radix.c

@@ -296,11 +296,6 @@ static void __init radix_init_page_sizes(void)
 void __init radix__early_init_mmu(void)
 {
 	unsigned long lpcr;
-	/*
-	 * setup LPCR UPRT based on mmu_features
-	 */
-	lpcr = mfspr(SPRN_LPCR);
-	mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
 
 #ifdef CONFIG_PPC_64K_PAGES
 	/* PAGE_SIZE mappings */
@@ -343,8 +338,11 @@ void __init radix__early_init_mmu(void)
 	__pte_frag_size_shift = H_PTE_FRAG_SIZE_SHIFT;
 
 	radix_init_page_sizes();
-	if (!firmware_has_feature(FW_FEATURE_LPAR))
+	if (!firmware_has_feature(FW_FEATURE_LPAR)) {
+		lpcr = mfspr(SPRN_LPCR);
+		mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
 		radix_init_partition_table();
+	}
 
 	radix_init_pgtable();
 }
@@ -353,16 +351,15 @@ void radix__early_init_mmu_secondary(void)
 {
 	unsigned long lpcr;
 	/*
-	 * setup LPCR UPRT based on mmu_features
+	 * update partition table control register and UPRT
 	 */
+	if (!firmware_has_feature(FW_FEATURE_LPAR)) {
 		lpcr = mfspr(SPRN_LPCR);
 		mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
-	/*
-	 * update partition table control register, 64 K size.
-	 */
-	if (!firmware_has_feature(FW_FEATURE_LPAR))
+
 		mtspr(SPRN_PTCR,
 		      __pa(partition_tb) | (PATB_SIZE_SHIFT - 12));
+	}
 }
 
 void radix__setup_initial_memory_limit(phys_addr_t first_memblock_base,

arch/powerpc/platforms/pseries/eeh_pseries.c

@@ -53,7 +53,6 @@ static int ibm_read_slot_reset_state2;
 static int ibm_slot_error_detail;
 static int ibm_get_config_addr_info;
 static int ibm_get_config_addr_info2;
-static int ibm_configure_bridge;
 static int ibm_configure_pe;
 
 /*
@@ -81,7 +80,14 @@ static int pseries_eeh_init(void)
 	ibm_get_config_addr_info2	= rtas_token("ibm,get-config-addr-info2");
 	ibm_get_config_addr_info	= rtas_token("ibm,get-config-addr-info");
 	ibm_configure_pe		= rtas_token("ibm,configure-pe");
-	ibm_configure_bridge		= rtas_token("ibm,configure-bridge");
+
+	/*
+	 * ibm,configure-pe and ibm,configure-bridge have the same semantics,
+	 * however ibm,configure-pe can be faster.  If we can't find
+	 * ibm,configure-pe then fall back to using ibm,configure-bridge.
+	 */
+	if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE)
+		ibm_configure_pe 	= rtas_token("ibm,configure-bridge");
 
 	/*
 	 * Necessary sanity check. We needn't check "get-config-addr-info"
@@ -93,8 +99,7 @@ static int pseries_eeh_init(void)
 	    (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE &&
 	     ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE)	||
 	    ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE	||
-	    (ibm_configure_pe == RTAS_UNKNOWN_SERVICE		&&
-	     ibm_configure_bridge == RTAS_UNKNOWN_SERVICE)) {
+	    ibm_configure_pe == RTAS_UNKNOWN_SERVICE) {
 		pr_info("EEH functionality not supported\n");
 		return -EINVAL;
 	}
@@ -615,29 +620,41 @@ static int pseries_eeh_configure_bridge(struct eeh_pe *pe)
 {
 	int config_addr;
 	int ret;
+	/* Waiting 0.2s maximum before skipping configuration */
+	int max_wait = 200;
 
 	/* Figure out the PE address */
 	config_addr = pe->config_addr;
 	if (pe->addr)
 		config_addr = pe->addr;
 
-	/* Use new configure-pe function, if supported */
-	if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) {
+	while (max_wait > 0) {
 		ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
 				config_addr, BUID_HI(pe->phb->buid),
 				BUID_LO(pe->phb->buid));
-	} else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) {
-		ret = rtas_call(ibm_configure_bridge, 3, 1, NULL,
-				config_addr, BUID_HI(pe->phb->buid),
-				BUID_LO(pe->phb->buid));
-	} else {
-		return -EFAULT;
+
+		if (!ret)
+			return ret;
+
+		/*
+		 * If RTAS returns a delay value that's above 100ms, cut it
+		 * down to 100ms in case firmware made a mistake.  For more
+		 * on how these delay values work see rtas_busy_delay_time
+		 */
+		if (ret > RTAS_EXTENDED_DELAY_MIN+2 &&
+		    ret <= RTAS_EXTENDED_DELAY_MAX)
+			ret = RTAS_EXTENDED_DELAY_MIN+2;
+
+		max_wait -= rtas_busy_delay_time(ret);
+
+		if (max_wait < 0)
+			break;
+
+		rtas_busy_delay(ret);
 	}
 
-	if (ret)
 	pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n",
 		__func__, pe->phb->global_number, pe->addr, ret);
-
 	return ret;
 }