net: use bool values to pass bool param of phy_init_eee()

The 2nd param of phy_init_eee(): clk_stop_enable is a bool param, use
true or false instead of 1/0.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220123152241.1480-1-jszhang@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/dsa/b53/b53_common.c

@@ -2186,7 +2186,7 @@ int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
 	int ret;
 
-	ret = phy_init_eee(phy, 0);
+	ret = phy_init_eee(phy, false);
 	if (ret)
 		return 0;
 

drivers/net/dsa/mt7530.c

@@ -2846,7 +2846,7 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
 			mcr |= PMCR_RX_FC_EN;
 	}
 
-	if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, 0) >= 0) {
+	if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
 		switch (speed) {
 		case SPEED_1000:
 			mcr |= PMCR_FORCE_EEE1G;

drivers/net/ethernet/broadcom/genet/bcmgenet.c

@@ -1368,7 +1368,7 @@ static int bcmgenet_set_eee(struct net_device *dev, struct ethtool_eee *e)
 	if (!p->eee_enabled) {
 		bcmgenet_eee_enable_set(dev, false);
 	} else {
-		ret = phy_init_eee(dev->phydev, 0);
+		ret = phy_init_eee(dev->phydev, false);
 		if (ret) {
 			netif_err(priv, hw, dev, "EEE initialization failed\n");
 			return ret;

drivers/net/ethernet/freescale/fec_main.c

@@ -2797,7 +2797,7 @@ static int fec_enet_eee_mode_set(struct net_device *ndev, bool enable)
 	int ret = 0;
 
 	if (enable) {
-		ret = phy_init_eee(ndev->phydev, 0);
+		ret = phy_init_eee(ndev->phydev, false);
 		if (ret)
 			return ret;
 

drivers/net/ethernet/marvell/mvneta.c

@@ -4212,7 +4212,7 @@ static void mvneta_mac_link_up(struct phylink_config *config,
 	mvneta_port_up(pp);
 
 	if (phy && pp->eee_enabled) {
-		pp->eee_active = phy_init_eee(phy, 0) >= 0;
+		pp->eee_active = phy_init_eee(phy, false) >= 0;
 		mvneta_set_eee(pp, pp->eee_active && pp->tx_lpi_enabled);
 	}
 }

drivers/net/ethernet/microchip/lan743x_ethtool.c

@@ -750,7 +750,7 @@ static int lan743x_ethtool_set_eee(struct net_device *netdev,
 	}
 
 	if (eee->eee_enabled) {
-		ret = phy_init_eee(phydev, 0);
+		ret = phy_init_eee(phydev, false);
 		if (ret) {
 			netif_err(adapter, drv, adapter->netdev,
 				  "EEE initialization failed\n");

drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c

@@ -127,7 +127,7 @@ bool sxgbe_eee_init(struct sxgbe_priv_data * const priv)
 	/* MAC core supports the EEE feature. */
 	if (priv->hw_cap.eee) {
 		/* Check if the PHY supports EEE */
-		if (phy_init_eee(ndev->phydev, 1))
+		if (phy_init_eee(ndev->phydev, true))
 			return false;
 
 		priv->eee_active = 1;