Merge tag 'tegra-for-3.10-dt' of...

Merge tag 'tegra-for-3.10-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt2

From Stephen Warren <swarren@wwwdotorg.org>:

ARM: tegra: device tree changes

This branch contains the majority of the device tree changes for Tegra.
Highlights include:

* Many changes for Tegra114, and the Dalmore board, to enable pinctrl,
  SDHCI/MMC, PWM, DMA, I2C, KBC, SPI, battery, regulators.
* Adding or enabling suspend wakeup sources on many boards, and adding
  suspend timing parameters, to support the system suspend patches.
* Adding clocks to the audio-related nodes, so that in 3.11, the audio
  driver can pull these clocks from device tree rather than hard-coding
  clock names.
* Some small DT fixes/cleanup.

This branch is based on the previous clk pull request.

* tag 'tegra-for-3.10-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (25 commits)
  clk: tegra: Fix cdev1 and cdev2 IDs
  ARM: dts: tegra: add the PM configurations of PMC
  ARM: tegra: add non-removable and keep-power-in-suspend property for MMC
  ARM: tegra: whistler: add wakeup source for KBC
  ARM: tegra: add power gpio keys to DT
  ARM: tegra: keep power on to SD slot on Dalmore
  ARM: tegra: add clocks property to AC'97 sound nodes
  ARM: tegra: add clocks property to sound nodes
  ARM: tegra: dalmore: add fixed regulator node
  ARM: tegra: dalmore: add TPS65090 node
  ARM: tegra: dalmore: add cpu regulator node
  ARM: tegra: Add sbs-battery node to Dalmore
  ARM: tegra: add DT binding for i2c-tegra
  ARM: tegra: add SPI nodes to Tegra114 DT
  ARM: tegra: add KBC nodes to Tegra114 DT
  ARM: tegra: add aliases and DMA requestor for serial nodes of Tegra114
  ARM: tegra: add I2C nodes to Tegra114 DT
  ARM: tegra: add APB DMA nodes to Tegra114 DT
  ARM: tegra: add PWM nodes to Tegra114 DT
  ARM: tegra: fix the status of PWM DT nodes
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt

+NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
+
+Required properties:
+- compatible : should be:
+	"nvidia,tegra114-i2c"
+	"nvidia,tegra30-i2c"
+	"nvidia,tegra20-i2c"
+	"nvidia,tegra20-i2c-dvc"
+  Details of compatible are as follows:
+  nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
+	controller. This only support master mode of I2C communication. Register
+	interface/offset and interrupts handling are different than generic I2C
+	controller. Driver of DVC I2C controller is only compatible with
+	"nvidia,tegra20-i2c-dvc".
+  nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
+	master and slave mode of I2C communication. The i2c-tegra driver only
+	support master mode of I2C communication. Driver of I2C controller is
+	only compatible with "nvidia,tegra20-i2c".
+  nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
+	very much similar to Tegra20 I2C controller with additional feature:
+	Continue Transfer Support. This feature helps to implement M_NO_START
+	as per I2C core API transfer flags. Driver of I2C controller is
+	compatible with "nvidia,tegra30-i2c" to enable the continue transfer
+	support. This is also compatible with "nvidia,tegra20-i2c" without
+	continue transfer support.
+  nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
+	very much similar to Tegra30 I2C controller with some hardware
+	modification:
+	 - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
+	   fast-clk. Tegra114 has only one clock source called as div-clk and
+	   hence clock mechanism is changed in I2C controller.
+	 - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
+	   default and there is no way to disable it. Tegra114 has this
+	   interrupt disable by default and SW need to enable explicitly.
+	Due to above changes, Tegra114 I2C driver makes incompatible with
+	previous hardware driver. Hence, tegra114 I2C controller is compatible
+	with "nvidia,tegra114-i2c".
+- reg: Should contain I2C controller registers physical address and length.
+- interrupts: Should contain I2C controller interrupts.
+- address-cells: Address cells for I2C device address.
+- size-cells: Size of the I2C device address.
+- clocks: Clock ID as per
+		Documentation/devicetree/bindings/clock/tegra<chip-id>.txt
+	for I2C controller.
+- clock-names: Name of the clock:
+	Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk".
+	Tegra114 I2C controller: "div-clk".
+
+Example:
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <0 38 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 12>, <&tegra_car 124>;
+		clock-names = "div-clk", "fast-clk";
+		status = "disabled";
+	};

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt

@@ -2,6 +2,11 @@ NVIDIA Tegra audio complex
 
 Required properties:
 - compatible : "nvidia,tegra-audio-alc5632"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  "pll_a" (The Tegra clock of that name),
+  "pll_a_out0" (The Tegra clock of that name),
+  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
@@ -56,4 +61,7 @@ sound {
 
 	nvidia,i2s-controller = <&tegra_i2s1>;
 	nvidia,audio-codec = <&alc5632>;
+
+	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+	clock-names = "pll_a", "pll_a_out0", "mclk";
 };

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt

@@ -2,6 +2,11 @@ NVIDIA Tegra audio complex for TrimSlice
 
 Required properties:
 - compatible : "nvidia,tegra-audio-trimslice"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  "pll_a" (The Tegra clock of that name),
+  "pll_a_out0" (The Tegra clock of that name),
+  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
 - nvidia,audio-codec : The phandle of the WM8903 audio codec
 
@@ -11,4 +16,6 @@ sound {
 	compatible = "nvidia,tegra-audio-trimslice";
 	nvidia,i2s-controller = <&tegra_i2s1>;
 	nvidia,audio-codec = <&codec>;
+	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+	clock-names = "pll_a", "pll_a_out0", "mclk";
 };

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt

@@ -2,6 +2,11 @@ NVIDIA Tegra audio complex
 
 Required properties:
 - compatible : "nvidia,tegra-audio-wm8753"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  "pll_a" (The Tegra clock of that name),
+  "pll_a_out0" (The Tegra clock of that name),
+  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
@@ -50,5 +55,8 @@ sound {
 
 	nvidia,i2s-controller = <&i2s1>;
 	nvidia,audio-codec = <&wm8753>;
+
+	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+	clock-names = "pll_a", "pll_a_out0", "mclk";
 };
 

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt

@@ -2,6 +2,11 @@ NVIDIA Tegra audio complex
 
 Required properties:
 - compatible : "nvidia,tegra-audio-wm8903"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  "pll_a" (The Tegra clock of that name),
+  "pll_a_out0" (The Tegra clock of that name),
+  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
@@ -67,5 +72,8 @@ sound {
 	nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
 	nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
 	nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+
+	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+	clock-names = "pll_a", "pll_a_out0", "mclk";
 };
 

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt

@@ -2,6 +2,11 @@ NVIDIA Tegra audio complex
 
 Required properties:
 - compatible : "nvidia,tegra-audio-wm9712"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  "pll_a" (The Tegra clock of that name),
+  "pll_a_out0" (The Tegra clock of that name),
+  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
 - nvidia,model : The user-visible name of this sound complex.
 - nvidia,audio-routing : A list of the connections between audio components.
   Each entry is a pair of strings, the first being the connection's sink,
@@ -48,4 +53,7 @@ sound {
 		"Mic", "MIC1";
 
 	nvidia,ac97-controller = <&ac97>;
+
+	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+	clock-names = "pll_a", "pll_a_out0", "mclk";
 };

arch/arm/boot/dts/tegra114.dtsi

@@ -4,6 +4,13 @@ / {
 	compatible = "nvidia,tegra114";
 	interrupt-parent = <&gic>;
 
+	aliases {
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
 	gic: interrupt-controller {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
@@ -33,6 +40,44 @@ tegra_car: clock {
 		#clock-cells = <1>;
 	};
 
+	apbdma: dma {
+		compatible = "nvidia,tegra114-apbdma";
+		reg = <0x6000a000 0x1400>;
+		interrupts = <0 104 0x04
+			      0 105 0x04
+			      0 106 0x04
+			      0 107 0x04
+			      0 108 0x04
+			      0 109 0x04
+			      0 110 0x04
+			      0 111 0x04
+			      0 112 0x04
+			      0 113 0x04
+			      0 114 0x04
+			      0 115 0x04
+			      0 116 0x04
+			      0 117 0x04
+			      0 118 0x04
+			      0 119 0x04
+			      0 128 0x04
+			      0 129 0x04
+			      0 130 0x04
+			      0 131 0x04
+			      0 132 0x04
+			      0 133 0x04
+			      0 134 0x04
+			      0 135 0x04
+			      0 136 0x04
+			      0 137 0x04
+			      0 138 0x04
+			      0 139 0x04
+			      0 140 0x04
+			      0 141 0x04
+			      0 142 0x04
+			      0 143 0x04>;
+		clocks = <&tegra_car 34>;
+	};
+
 	ahb: ahb {
 		compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
 		reg = <0x6000c004 0x14c>;
@@ -61,42 +106,189 @@ pinmux: pinmux {
 		       0x70003000 0x40c>;	/* Mux registers */
 	};
 
-	serial@70006000 {
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the comptible is
+	 * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@70006000 {
 		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
 		reg = <0x70006000 0x40>;
 		reg-shift = <2>;
 		interrupts = <0 36 0x04>;
+		nvidia,dma-request-selector = <&apbdma 8>;
 		status = "disabled";
 		clocks = <&tegra_car 6>;
 	};
 
-	serial@70006040 {
+	uartb: serial@70006040 {
 		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
 		reg = <0x70006040 0x40>;
 		reg-shift = <2>;
 		interrupts = <0 37 0x04>;
+		nvidia,dma-request-selector = <&apbdma 9>;
 		status = "disabled";
 		clocks = <&tegra_car 192>;
 	};
 
-	serial@70006200 {
+	uartc: serial@70006200 {
 		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
 		reg = <0x70006200 0x100>;
 		reg-shift = <2>;
 		interrupts = <0 46 0x04>;
+		nvidia,dma-request-selector = <&apbdma 10>;
 		status = "disabled";
 		clocks = <&tegra_car 55>;
 	};
 
-	serial@70006300 {
+	uartd: serial@70006300 {
 		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
 		reg = <0x70006300 0x100>;
 		reg-shift = <2>;
 		interrupts = <0 90 0x04>;
+		nvidia,dma-request-selector = <&apbdma 19>;
 		status = "disabled";
 		clocks = <&tegra_car 65>;
 	};
 
+	pwm: pwm {
+		compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car 17>;
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <0 38 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 12>;
+		clock-names = "div-clk";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <0 84 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 54>;
+		clock-names = "div-clk";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <0 92 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 67>;
+		clock-names = "div-clk";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <0 120 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 103>;
+		clock-names = "div-clk";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <0 53 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 47>;
+		clock-names = "div-clk";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d400 0x200>;
+		interrupts = <0 59 0x04>;
+		nvidia,dma-request-selector = <&apbdma 15>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 41>;
+		clock-names = "spi";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d600 0x200>;
+		interrupts = <0 82 0x04>;
+		nvidia,dma-request-selector = <&apbdma 16>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 44>;
+		clock-names = "spi";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d800 0x200>;
+		interrupts = <0 83 0x04>;
+		nvidia,dma-request-selector = <&apbdma 17>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 46>;
+		clock-names = "spi";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000da00 0x200>;
+		interrupts = <0 93 0x04>;
+		nvidia,dma-request-selector = <&apbdma 18>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 68>;
+		clock-names = "spi";
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000dc00 0x200>;
+		interrupts = <0 94 0x04>;
+		nvidia,dma-request-selector = <&apbdma 27>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 104>;
+		clock-names = "spi";
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000de00 0x200>;
+		interrupts = <0 79 0x04>;
+		nvidia,dma-request-selector = <&apbdma 28>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 105>;
+		clock-names = "spi";
+		status = "disabled";
+	};
+
 	rtc {
 		compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
 		reg = <0x7000e000 0x100>;
@@ -104,6 +296,14 @@ rtc {
 		clocks = <&tegra_car 4>;
 	};
 
+	kbc {
+		compatible = "nvidia,tegra114-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <0 85 0x04>;
+		clocks = <&tegra_car 36>;
+		status = "disabled";
+	};
+
 	pmc {
 		compatible = "nvidia,tegra114-pmc";
 		reg = <0x7000e400 0x400>;
@@ -122,6 +322,38 @@ iommu {
 		nvidia,ahb = <&ahb>;
 	};
 
+	sdhci@78000000 {
+		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+		reg = <0x78000000 0x200>;
+		interrupts = <0 14 0x04>;
+		clocks = <&tegra_car 14>;
+		status = "disable";
+	};
+
+	sdhci@78000200 {
+		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+		reg = <0x78000200 0x200>;
+		interrupts = <0 15 0x04>;
+		clocks = <&tegra_car 9>;
+		status = "disable";
+	};
+
+	sdhci@78000400 {
+		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+		reg = <0x78000400 0x200>;
+		interrupts = <0 19 0x04>;
+		clocks = <&tegra_car 69>;
+		status = "disable";
+	};
+
+	sdhci@78000600 {
+		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+		reg = <0x78000600 0x200>;
+		interrupts = <0 31 0x04>;
+		clocks = <&tegra_car 15>;
+		status = "disable";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/tegra20-colibri-512.dtsi

@@ -361,6 +361,15 @@ temperature-sensor@4c {
 		};
 	};
 
+	pmc {
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+	};
+
 	memory-controller@7000f400 {
 		emc-table@83250 {
 			reg = <83250>;
@@ -473,6 +482,9 @@ sound {
 			"Mic", "MIC1";
 
 		nvidia,ac97-controller = <&ac97>;
+
+		clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
 	regulators {

arch/arm/boot/dts/tegra20-harmony.dts

@@ -416,6 +416,12 @@ temperature-sensor@4c {
 
 	pmc {
 		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
 	};
 
 	usb@c5000000 {
@@ -464,6 +470,17 @@ clk32k_in: clock {
 		};
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio 170 1>; /* gpio PV2, active low */
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+	};
+
 	kbc {
 		status = "okay";
 		nvidia,debounce-delay-ms = <2>;
@@ -669,5 +686,8 @@ sound {
 		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
 		nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
 		nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+
+		clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };

arch/arm/boot/dts/tegra20-medcom-wide.dts

@@ -6,6 +6,10 @@ / {
 	model = "Avionic Design Medcom-Wide board";
 	compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
 
+	pwm {
+		status = "okay";
+	};
+
 	i2c@7000c000 {
 		wm8903: wm8903@1a {
 			compatible = "wlf,wm8903";
@@ -54,5 +58,8 @@ sound {
 
 		nvidia,spkr-en-gpios = <&wm8903 2 0>;
 		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+
+		clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };

arch/arm/boot/dts/tegra20-paz00.dts

@@ -415,6 +415,12 @@ adt7461@4c {
 
 	pmc {
 		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,sys-clock-req-active-high;
 	};
 
 	usb@c5000000 {
@@ -445,6 +451,7 @@ sdhci@c8000000 {
 	sdhci@c8000600 {
 		status = "okay";
 		bus-width = <8>;
+		non-removable;
 	};
 
 	clocks {
@@ -514,5 +521,8 @@ sound {
 		nvidia,audio-codec = <&alc5632>;
 		nvidia,i2s-controller = <&tegra_i2s1>;
 		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+
+		clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };

arch/arm/boot/dts/tegra20-plutux.dts

@@ -52,5 +52,8 @@ sound {
 
 		nvidia,spkr-en-gpios = <&wm8903 2 0>;
 		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+
+		clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };

arch/arm/boot/dts/tegra20-seaboard.dts

@@ -517,6 +517,12 @@ magnetometer@c {
 
 	pmc {
 		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
 	};
 
 	memory-controller@7000f400 {
@@ -580,6 +586,7 @@ sdhci@c8000000 {
 		status = "okay";
 		power-gpios = <&gpio 86 0>; /* gpio PK6 */
 		bus-width = <4>;
+		keep-power-in-suspend;
 	};
 
 	sdhci@c8000400 {
@@ -593,6 +600,7 @@ sdhci@c8000400 {
 	sdhci@c8000600 {
 		status = "okay";
 		bus-width = <8>;
+		non-removable;
 	};
 
 	clocks {
@@ -821,5 +829,8 @@ sound {
 
 		nvidia,spkr-en-gpios = <&wm8903 2 0>;
 		nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
+
+		clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };

arch/arm/boot/dts/tegra20-tamonten.dtsi

@@ -458,6 +458,12 @@ temperature-sensor@4c {
 
 	pmc {
 		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
 	};
 
 	usb@c5008000 {

arch/arm/boot/dts/tegra20-tec.dts

@@ -52,5 +52,8 @@ sound {
 
 		nvidia,spkr-en-gpios = <&wm8903 2 0>;
 		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+
+		clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };

arch/arm/boot/dts/tegra20-trimslice.dts

@@ -300,6 +300,15 @@ rtc@56 {
 		};
 	};
 
+	pmc {
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+	};
+
 	usb@c5000000 {
 		status = "okay";
 		nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */
@@ -343,6 +352,17 @@ clk32k_in: clock {
 		};
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio 190 1>; /* gpio PX6, active low */
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+	};
+
 	poweroff {
 		compatible = "gpio-poweroff";
 		gpios = <&gpio 191 1>; /* gpio PX7, active low */
@@ -376,5 +396,8 @@ sound {
 		compatible = "nvidia,tegra-audio-trimslice";
 		nvidia,i2s-controller = <&tegra_i2s1>;
 		nvidia,audio-codec = <&codec>;
+
+		clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };

arch/arm/boot/dts/tegra20-ventana.dts

@@ -493,6 +493,12 @@ temperature-sensor@4c {
 
 	pmc {
 		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
 	};
 
 	usb@c5000000 {
@@ -516,6 +522,7 @@ sdhci@c8000000 {
 		status = "okay";
 		power-gpios = <&gpio 86 0>; /* gpio PK6 */
 		bus-width = <4>;
+		keep-power-in-suspend;
 	};
 
 	sdhci@c8000400 {
@@ -529,6 +536,7 @@ sdhci@c8000400 {
 	sdhci@c8000600 {
 		status = "okay";
 		bus-width = <8>;
+		non-removable;
 	};
 
 	clocks {
@@ -544,6 +552,17 @@ clk32k_in: clock {
 		};
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio 170 1>; /* gpio PV2, active low */
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -620,5 +639,8 @@ sound {
 		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
 		nvidia,int-mic-en-gpios = <&gpio 184 0>; /* gpio PX0 */
 		nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+
+		clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };

arch/arm/boot/dts/tegra20-whistler.dts

@@ -496,6 +496,14 @@ vrtc {
 
 	pmc {
 		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <1000>;
+		nvidia,core-pwr-good-time = <0 3845>;
+		nvidia,core-pwr-off-time = <93727>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		nvidia,combined-power-req;
 	};
 
 	usb@c5000000 {
@@ -518,6 +526,7 @@ sdhci@c8000400 {
 	sdhci@c8000600 {
 		status = "okay";
 		bus-width = <8>;
+		non-removable;
 	};
 
 	clocks {
@@ -539,6 +548,7 @@ kbc {
 		nvidia,repeat-delay-ms = <160>;
 		nvidia,kbc-row-pins = <0 1 2>;
 		nvidia,kbc-col-pins = <16 17>;
+		nvidia,wakeup-source;
 		linux,keymap = <0x00000074	/* KEY_POWER */
 				0x01000066	/* KEY_HOME */
 				0x0101009E	/* KEY_BACK */
@@ -573,5 +583,8 @@ sound {
 
 		nvidia,i2s-controller = <&tegra_i2s1>;
 		nvidia,audio-codec = <&codec>;
+
+		clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };

arch/arm/boot/dts/tegra20.dtsi

@@ -299,6 +299,7 @@ pwm: pwm {
 		reg = <0x7000a000 0x100>;
 		#pwm-cells = <2>;
 		clocks = <&tegra_car 17>;
+		status = "disabled";
 	};
 
 	rtc {
@@ -442,31 +443,6 @@ memory-controller@7000f400 {
 		#size-cells = <0>;
 	};
 
-	phy1: usb-phy@c5000400 {
-		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5000400 0x3c00>;
-		phy_type = "utmi";
-		nvidia,has-legacy-mode;
-		clocks = <&tegra_car 22>, <&tegra_car 127>;
-		clock-names = "phy", "pll_u";
-	};
-
-	phy2: usb-phy@c5004400 {
-		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5004400 0x3c00>;
-		phy_type = "ulpi";
-		clocks = <&tegra_car 94>, <&tegra_car 127>;
-		clock-names = "phy", "pll_u";
-	};
-
-	phy3: usb-phy@c5008400 {
-		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5008400 0x3C00>;
-		phy_type = "utmi";
-		clocks = <&tegra_car 22>, <&tegra_car 127>;
-		clock-names = "phy", "pll_u";
-	};
-
 	usb@c5000000 {
 		compatible = "nvidia,tegra20-ehci", "usb-ehci";
 		reg = <0xc5000000 0x4000>;
@@ -479,6 +455,15 @@ usb@c5000000 {
 		status = "disabled";
 	};
 
+	phy1: usb-phy@c5000400 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5000400 0x3c00>;
+		phy_type = "utmi";
+		nvidia,has-legacy-mode;
+		clocks = <&tegra_car 22>, <&tegra_car 127>;
+		clock-names = "phy", "pll_u";
+	};
+
 	usb@c5004000 {
 		compatible = "nvidia,tegra20-ehci", "usb-ehci";
 		reg = <0xc5004000 0x4000>;
@@ -489,6 +474,14 @@ usb@c5004000 {
 		status = "disabled";
 	};
 
+	phy2: usb-phy@c5004400 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5004400 0x3c00>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car 93>, <&tegra_car 127>;
+		clock-names = "phy", "pll_u";
+	};
+
 	usb@c5008000 {
 		compatible = "nvidia,tegra20-ehci", "usb-ehci";
 		reg = <0xc5008000 0x4000>;
@@ -499,6 +492,14 @@ usb@c5008000 {
 		status = "disabled";
 	};
 
+	phy3: usb-phy@c5008400 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5008400 0x3c00>;
+		phy_type = "utmi";
+		clocks = <&tegra_car 22>, <&tegra_car 127>;
+		clock-names = "phy", "pll_u";
+	};
+
 	sdhci@c8000000 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000000 0x200>;

arch/arm/boot/dts/tegra30-beaver.dts

@@ -253,6 +253,13 @@ i2s@70080400 {
 	pmc {
 		status = "okay";
 		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
 	};
 
 	sdhci@78000000 {
@@ -266,6 +273,7 @@ sdhci@78000000 {
 	sdhci@78000600 {
 		status = "okay";
 		bus-width = <8>;
+		non-removable;
 	};
 
 	clocks {

arch/arm/boot/dts/tegra30-cardhu-a02.dts

@@ -88,6 +88,7 @@ sdhci@78000400 {
 		status = "okay";
 		power-gpios = <&gpio 28 0>; /* gpio PD4 */
 		bus-width = <4>;
+		keep-power-in-suspend;
 	};
 };
 

arch/arm/boot/dts/tegra30-cardhu-a04.dts

@@ -100,5 +100,6 @@ sdhci@78000400 {
 		status = "okay";
 		power-gpios = <&gpio 27 0>; /* gpio PD3 */
 		bus-width = <4>;
+		keep-power-in-suspend;
 	};
 };

arch/arm/boot/dts/tegra30-cardhu.dtsi

@@ -307,6 +307,13 @@ i2s@70080400 {
 	pmc {
 		status = "okay";
 		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
 	};
 
 	sdhci@78000000 {
@@ -320,6 +327,7 @@ sdhci@78000000 {
 	sdhci@78000600 {
 		status = "okay";
 		bus-width = <8>;
+		non-removable;
 	};
 
 	clocks {
@@ -509,5 +517,8 @@ sound {
 
 		nvidia,spkr-en-gpios = <&wm8903 2 0>;
 		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+
+		clocks = <&tegra_car 184>, <&tegra_car 185>, <&tegra_car 120>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };

arch/arm/boot/dts/tegra30.dtsi

@@ -286,6 +286,7 @@ pwm: pwm {
 		reg = <0x7000a000 0x100>;
 		#pwm-cells = <2>;
 		clocks = <&tegra_car 17>;
+		status = "disabled";
 	};
 
 	rtc {