Skip to content

L
linux
Commit 53575aa9 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM driver updates from Olof Johansson:
 "Updates of SoC-near drivers and other driver updates that makes more
  sense to take through our tree.  In this case it's involved:

   - Some Davinci driver updates that has required corresponding
     platform code changes (gpio mostly)
   - CCI bindings and a few driver updates
   - Marvell mvebu patches for PCI MSI support (could have gone through
     the PCI tree for this release, but they were acked by Bjorn for
     3.12 so we kept them through arm-soc).
   - Marvell dove switch-over to DT-based PCIe configuration
   - Misc updates for Samsung platform dmaengine drivers"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442
  dmaengine: s3c24xx-dma: add support for the s3c2410 type of controller
  ARM: S3C24XX: Fix possible dma selection warning
  PCI: mvebu: make local functions static
  PCI: mvebu: add I/O access wrappers
  PCI: mvebu: Dynamically detect if the PEX link is up to enable hot plug
  ARM: mvebu: fix gated clock documentation
  ARM: dove: remove legacy pcie and clock init
  ARM: dove: switch to DT probed mbus address windows
  ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device
  ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443
  dmaengine: add driver for Samsung s3c24xx SoCs
  ARM: S3C24XX: number the dma clocks
  PCI: mvebu: add support for Marvell Dove SoCs
  PCI: mvebu: add support for reset on GPIO
  PCI: mvebu: remove subsys_initcall
  PCI: mvebu: increment nports only for registered ports
  PCI: mvebu: move clock enable before register access
  PCI: mvebu: add support for MSI
  irqchip: armada-370-xp: implement MSI support
  ...
parents d5aabbca 3316dee2
Hide whitespace changes
Inline Side-by-side
Showing with 3082 additions and 434 deletions
Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt
View file @ 53575aa9
......@@ -4,6 +4,8 @@ Marvell Armada 370 and Armada XP Interrupt Controller
Required properties:
- compatible: Should be "marvell,mpic"
- interrupt-controller: Identifies the node as an interrupt controller.
- msi-controller: Identifies the node as an PCI Message Signaled
Interrupt controller.
- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
The cell is the IRQ number
......@@ -24,6 +26,7 @@ Example:
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
msi-controller;
reg = <0xd0020a00 0x1d0>,
<0xd0021070 0x58>;
};
Documentation/devicetree/bindings/arm/cci.txt
View file @ 53575aa9
......@@ -36,14 +36,18 @@ specific to ARM.
- reg
Usage: required
Value type: <prop-encoded-array>
Value type: Integer cells. A register entry, expressed as a pair
of cells, containing base and size.
Definition: A standard property. Specifies base physical
address of CCI control registers common to all
interfaces.
- ranges:
Usage: required
Value type: <prop-encoded-array>
Value type: Integer cells. An array of range entries, expressed
as a tuple of cells, containing child address,
parent address and the size of the region in the
child address space.
Definition: A standard property. Follow rules in the ePAPR for
hierarchical bus addressing. CCI interfaces
addresses refer to the parent node addressing
......@@ -74,11 +78,49 @@ specific to ARM.
- reg:
Usage: required
Value type: <prop-encoded-array>
Value type: Integer cells. A register entry, expressed
as a pair of cells, containing base and
size.
Definition: the base address and size of the
corresponding interface programming
registers.
- CCI PMU node
Parent node must be CCI interconnect node.
A CCI pmu node must contain the following properties:
- compatible
Usage: required
Value type: <string>
Definition: must be "arm,cci-400-pmu"
- reg:
Usage: required
Value type: Integer cells. A register entry, expressed
as a pair of cells, containing base and
size.
Definition: the base address and size of the
corresponding interface programming
registers.
- interrupts:
Usage: required
Value type: Integer cells. Array of interrupt specifier
entries, as defined in
../interrupt-controller/interrupts.txt.
Definition: list of counter overflow interrupts, one per
counter. The interrupts must be specified
starting with the cycle counter overflow
interrupt, followed by counter0 overflow
interrupt, counter1 overflow interrupt,...
,counterN overflow interrupt.
The CCI PMU has an interrupt signal for each
counter. The number of interrupts must be
equal to the number of counters.
* CCI interconnect bus masters
Description: masters in the device tree connected to a CCI port
......@@ -144,7 +186,7 @@ Example:
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x2c090000 0 0x1000>;
ranges = <0x0 0x0 0x2c090000 0x6000>;
ranges = <0x0 0x0 0x2c090000 0x10000>;
cci_control0: slave-if@1000 {
compatible = "arm,cci-400-ctrl-if";
......@@ -163,6 +205,16 @@ Example:
interface-type = "ace";
reg = <0x5000 0x1000>;
};
pmu@9000 {
compatible = "arm,cci-400-pmu";
reg = <0x9000 0x5000>;
interrupts = <0 101 4>,
<0 102 4>,
<0 103 4>,
<0 104 4>,
<0 105 4>;
};
};
This CCI node corresponds to a CCI component whose control registers sits
......
Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
View file @ 53575aa9
* Gated Clock bindings for Marvell Orion SoCs
* Gated Clock bindings for Marvell EBU SoCs
Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save
some power. The clock consumer should specify the desired clock by having
the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to
the corresponding clock gating control bit in HW to ease manual clock lookup
in datasheet.
Marvell Armada 370/XP, Dove and Kirkwood allow some peripheral clocks to be
gated to save some power. The clock consumer should specify the desired clock
by having the clock ID in its "clocks" phandle cell. The clock ID is directly
mapped to the corresponding clock gating control bit in HW to ease manual clock
lookup in datasheet.
The following is a list of provided IDs for Armada 370:
ID Clock Peripheral
......@@ -94,6 +94,8 @@ ID Clock Peripheral
Required properties:
- compatible : shall be one of the following:
"marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating
"marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
"marvell,dove-gating-clock" - for Dove SoC clock gating
"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
- reg : shall be the register address of the Clock Gating Control register
......
Documentation/devicetree/bindings/pci/mvebu-pci.txt
View file @ 53575aa9
......@@ -5,6 +5,7 @@ Mandatory properties:
- compatible: one of the following values:
marvell,armada-370-pcie
marvell,armada-xp-pcie
marvell,dove-pcie
marvell,kirkwood-pcie
- #address-cells, set to <3>
- #size-cells, set to <2>
......@@ -14,6 +15,8 @@ Mandatory properties:
- ranges: ranges describing the MMIO registers to control the PCIe
interfaces, and ranges describing the MBus windows needed to access
the memory and I/O regions of each PCIe interface.
- msi-parent: Link to the hardware entity that serves as the Message
Signaled Interrupt controller for this PCI controller.
The ranges describing the MMIO registers have the following layout:
......@@ -74,6 +77,8 @@ and the following optional properties:
- marvell,pcie-lane: the physical PCIe lane number, for ports having
multiple lanes. If this property is not found, we assume that the
value is 0.
- reset-gpios: optional gpio to PERST#
- reset-delay-us: delay in us to wait after reset de-assertion
Example:
......@@ -86,6 +91,7 @@ pcie-controller {
#size-cells = <2>;
bus-range = <0x00 0xff>;
msi-parent = <&mpic>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
......@@ -135,6 +141,10 @@ pcie-controller {
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
/* low-active PERST# reset on GPIO 25 */
reset-gpios = <&gpio0 25 1>;
/* wait 20ms for device settle after reset deassertion */
reset-delay-us = <20000>;
clocks = <&gateclk 5>;
status = "disabled";
};
......
arch/arm/Kconfig
View file @ 53575aa9
......@@ -826,7 +826,6 @@ config ARCH_DAVINCI
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select HAVE_IDE
select NEED_MACH_GPIO_H
select TI_PRIV_EDMA
select USE_OF
select ZONE_DMA
......
arch/arm/mach-davinci/board-da830-evm.c
View file @ 53575aa9
......@@ -22,17 +22,19 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include <linux/platform_data/spi-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/cp_intc.h>
#include <mach/mux.h>
#include <linux/platform_data/mtd-davinci.h>
#include <mach/da8xx.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include <linux/platform_data/spi-davinci.h>
#define DA830_EVM_PHY_ID ""
/*
......@@ -591,6 +593,10 @@ static __init void da830_evm_init(void)
struct davinci_soc_info *soc_info = &davinci_soc_info;
int ret;
ret = da830_register_gpio();
if (ret)
pr_warn("da830_evm_init: GPIO init failed: %d\n", ret);
ret = da830_register_edma(da830_edma_rsv);
if (ret)
pr_warning("da830_evm_init: edma registration failed: %d\n",
......
arch/arm/mach-davinci/board-da850-evm.c
View file @ 53575aa9
......@@ -28,6 +28,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include <linux/platform_data/spi-davinci.h>
......@@ -38,6 +39,7 @@
#include <linux/spi/flash.h>
#include <linux/wl12xx.h>
#include <mach/common.h>
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
#include <mach/mux.h>
......@@ -1437,6 +1439,10 @@ static __init void da850_evm_init(void)
{
int ret;
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
ret = pmic_tps65070_init();
if (ret)
pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
......
arch/arm/mach-davinci/board-dm355-evm.c
View file @ 53575aa9
......@@ -22,15 +22,17 @@
#include <media/tvp514x.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_data/i2c-davinci.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include <mach/common.h>
#include "davinci.h"
......@@ -375,6 +377,11 @@ static struct spi_board_info dm355_evm_spi_info[] __initconst = {
static __init void dm355_evm_init(void)
{
struct clk *aemif;
int ret;
ret = dm355_gpio_register();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
gpio_request(1, "dm9000");
gpio_direction_input(1);
......
arch/arm/mach-davinci/board-dm355-leopard.c
View file @ 53575aa9
......@@ -19,15 +19,16 @@
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/platform_data/i2c-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <linux/platform_data/i2c-davinci.h>
#include <mach/common.h>
#include <mach/serial.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
......@@ -234,6 +235,11 @@ static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
static __init void dm355_leopard_init(void)
{
struct clk *aemif;
int ret;
ret = dm355_gpio_register();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
gpio_request(9, "dm9000");
gpio_direction_input(9);
......
arch/arm/mach-davinci/board-dm365-evm.c
View file @ 53575aa9
......@@ -743,6 +743,12 @@ static struct spi_board_info dm365_evm_spi_info[] __initconst = {
static __init void dm365_evm_init(void)
{
int ret;
ret = dm365_gpio_register();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
evm_init_i2c();
davinci_serial_init(dm365_serial_device);
......
arch/arm/mach-davinci/board-dm644x-evm.c
View file @ 53575aa9
......@@ -754,9 +754,14 @@ static int davinci_phy_fixup(struct phy_device *phydev)
static __init void davinci_evm_init(void)
{
int ret;
struct clk *aemif_clk;
struct davinci_soc_info *soc_info = &davinci_soc_info;
ret = dm644x_gpio_register();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
aemif_clk = clk_get(NULL, "aemif");
clk_prepare_enable(aemif_clk);
......
arch/arm/mach-davinci/board-dm646x-evm.c
View file @ 53575aa9
......@@ -33,17 +33,19 @@
#include <linux/mtd/partitions.h>
#include <linux/clk.h>
#include <linux/export.h>
#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_data/i2c-davinci.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/serial.h>
#include <linux/platform_data/i2c-davinci.h>
#include <linux/platform_data/mtd-davinci.h>
#include <mach/clock.h>
#include <mach/cdce949.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include "davinci.h"
#include "clock.h"
......@@ -786,8 +788,13 @@ static struct edma_rsv_info dm646x_edma_rsv[] = {
static __init void evm_init(void)
{
int ret;
struct davinci_soc_info *soc_info = &davinci_soc_info;
ret = dm646x_gpio_register();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
evm_init_i2c();
davinci_serial_init(dm646x_serial_device);
dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
......
arch/arm/mach-davinci/board-neuros-osd2.c
View file @ 53575aa9
......@@ -26,17 +26,18 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_data/i2c-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"
......@@ -169,9 +170,14 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
static __init void davinci_ntosd2_init(void)
{
int ret;
struct clk *aemif_clk;
struct davinci_soc_info *soc_info = &davinci_soc_info;
ret = dm644x_gpio_register();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
aemif_clk = clk_get(NULL, "aemif");
clk_prepare_enable(aemif_clk);
......
arch/arm/mach-davinci/board-omapl138-hawk.c
View file @ 53575aa9
......@@ -13,10 +13,12 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/gpio.h>
#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
#include <mach/mux.h>
......@@ -290,6 +292,10 @@ static __init void omapl138_hawk_init(void)
{
int ret;
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
davinci_serial_init(da8xx_serial_device);
omapl138_hawk_config_emac();
......
arch/arm/mach-davinci/da830.c
View file @ 53575aa9
......@@ -11,6 +11,7 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach/map.h>
......@@ -20,7 +21,6 @@
#include <mach/common.h>
#include <mach/time.h>
#include <mach/da8xx.h>
#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
......@@ -1151,6 +1151,16 @@ static struct davinci_id da830_ids[] = {
},
};
static struct davinci_gpio_platform_data da830_gpio_platform_data = {
.ngpio = 128,
.intc_irq_num = DA830_N_CP_INTC_IRQ,
};
int __init da830_register_gpio(void)
{
return da8xx_register_gpio(&da830_gpio_platform_data);
}
static struct davinci_timer_instance da830_timer_instance[2] = {
{
.base = DA8XX_TIMER64P0_BASE,
......@@ -1196,10 +1206,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
.intc_irq_prios = da830_default_priorities,
.intc_irq_num = DA830_N_CP_INTC_IRQ,
.timer_info = &da830_timer_info,
.gpio_type = GPIO_TYPE_DAVINCI,
.gpio_base = DA8XX_GPIO_BASE,
.gpio_num = 128,
.gpio_irq = IRQ_DA8XX_GPIO0,
.emac_pdata = &da8xx_emac_pdata,
};
......
arch/arm/mach-davinci/da850.c
View file @ 53575aa9
......@@ -17,6 +17,7 @@
#include <linux/platform_device.h>
#include <linux/cpufreq.h>
#include <linux/regulator/consumer.h>
#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach/map.h>
......@@ -28,7 +29,6 @@
#include <mach/da8xx.h>
#include <mach/cpufreq.h>
#include <mach/pm.h>
#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
......@@ -1281,6 +1281,16 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
return platform_device_register(&da850_vpif_capture_dev);
}
static struct davinci_gpio_platform_data da850_gpio_platform_data = {
.ngpio = 144,
.intc_irq_num = DA850_N_CP_INTC_IRQ,
};
int __init da850_register_gpio(void)
{
return da8xx_register_gpio(&da850_gpio_platform_data);
}
static struct davinci_soc_info davinci_soc_info_da850 = {
.io_desc = da850_io_desc,
.io_desc_num = ARRAY_SIZE(da850_io_desc),
......@@ -1298,10 +1308,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
.intc_irq_prios = da850_default_priorities,
.intc_irq_num = DA850_N_CP_INTC_IRQ,
.timer_info = &da850_timer_info,
.gpio_type = GPIO_TYPE_DAVINCI,
.gpio_base = DA8XX_GPIO_BASE,
.gpio_num = 144,
.gpio_irq = IRQ_DA8XX_GPIO0,
.emac_pdata = &da8xx_emac_pdata,
.sram_dma = DA8XX_SHARED_RAM_BASE,
.sram_len = SZ_128K,
......
arch/arm/mach-davinci/davinci.h
View file @ 53575aa9
......@@ -53,6 +53,9 @@ extern void __iomem *davinci_sysmod_base;
#define DAVINCI_SYSMOD_VIRT(x) (davinci_sysmod_base + (x))
void davinci_map_sysmod(void);
#define DAVINCI_GPIO_BASE 0x01C67000
int davinci_gpio_register(struct resource *res, int size, void *pdata);
/* DM355 base addresses */
#define DM355_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DM355_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
......@@ -82,6 +85,7 @@ void dm355_init_spi0(unsigned chipselect_mask,
const struct spi_board_info *info, unsigned len);
void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
int dm355_init_video(struct vpfe_config *, struct vpbe_config *);
int dm355_gpio_register(void);
/* DM365 function declarations */
void dm365_init(void);
......@@ -92,11 +96,13 @@ void dm365_init_rtc(void);
void dm365_init_spi0(unsigned chipselect_mask,
const struct spi_board_info *info, unsigned len);
int dm365_init_video(struct vpfe_config *, struct vpbe_config *);
int dm365_gpio_register(void);
/* DM644x function declarations */
void dm644x_init(void);
void dm644x_init_asp(struct snd_platform_data *pdata);
int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
int dm644x_gpio_register(void);
/* DM646x function declarations */
void dm646x_init(void);
......@@ -106,6 +112,7 @@ int dm646x_init_edma(struct edma_rsv_info *rsv);
void dm646x_video_init(void);
void dm646x_setup_vpif(struct vpif_display_config *,
struct vpif_capture_config *);
int dm646x_gpio_register(void);
extern struct platform_device dm365_serial_device[];
extern struct platform_device dm355_serial_device[];
......
arch/arm/mach-davinci/devices-da8xx.c
View file @ 53575aa9
......@@ -665,6 +665,32 @@ int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata)
return platform_device_register(&da8xx_lcdc_device);
}
static struct resource da8xx_gpio_resources[] = {
{ /* registers */
.start = DA8XX_GPIO_BASE,
.end = DA8XX_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
{ /* interrupt */
.start = IRQ_DA8XX_GPIO0,
.end = IRQ_DA8XX_GPIO8,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da8xx_gpio_device = {
.name = "davinci_gpio",
.id = -1,
.num_resources = ARRAY_SIZE(da8xx_gpio_resources),
.resource = da8xx_gpio_resources,
};
int __init da8xx_register_gpio(void *pdata)
{
da8xx_gpio_device.dev.platform_data = pdata;
return platform_device_register(&da8xx_gpio_device);
}
static struct resource da8xx_mmcsd0_resources[] = {
{ /* registers */
.start = DA8XX_MMCSD0_BASE,
......
arch/arm/mach-davinci/devices.c
View file @ 53575aa9
......@@ -318,6 +318,19 @@ static void davinci_init_wdt(void)
platform_device_register(&davinci_wdt_device);
}
static struct platform_device davinci_gpio_device = {
.name = "davinci_gpio",
.id = -1,
};
int davinci_gpio_register(struct resource *res, int size, void *pdata)
{
davinci_gpio_device.resource = res;
davinci_gpio_device.num_resources = size;
davinci_gpio_device.dev.platform_data = pdata;
return platform_device_register(&davinci_gpio_device);
}
/*-------------------------------------------------------------------------*/
/*-------------------------------------------------------------------------*/
......
arch/arm/mach-davinci/dm355.c
View file @ 53575aa9
......@@ -13,8 +13,10 @@
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_data/spi-davinci.h>
#include <asm/mach/map.h>
......@@ -25,9 +27,6 @@
#include <mach/time.h>
#include <mach/serial.h>
#include <mach/common.h>
#include <linux/platform_data/spi-davinci.h>
#include <mach/gpio-davinci.h>
#include <linux/platform_data/edma.h>
#include "davinci.h"
#include "clock.h"
......@@ -886,6 +885,30 @@ static struct platform_device dm355_vpbe_dev = {
},
};
static struct resource dm355_gpio_resources[] = {
{ /* registers */
.start = DAVINCI_GPIO_BASE,
.end = DAVINCI_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
{ /* interrupt */
.start = IRQ_DM355_GPIOBNK0,
.end = IRQ_DM355_GPIOBNK6,
.flags = IORESOURCE_IRQ,
},
};
static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
.ngpio = 104,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
};
int __init dm355_gpio_register(void)
{
return davinci_gpio_register(dm355_gpio_resources,
sizeof(dm355_gpio_resources),
&dm355_gpio_platform_data);
}
/*----------------------------------------------------------------------*/
static struct map_desc dm355_io_desc[] = {
......@@ -1005,10 +1028,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
.intc_irq_prios = dm355_default_priorities,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
.timer_info = &dm355_timer_info,
.gpio_type = GPIO_TYPE_DAVINCI,
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 104,
.gpio_irq = IRQ_DM355_GPIOBNK0,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
};
......
arch/arm/mach-davinci/dm365.c
View file @ 53575aa9
......@@ -19,6 +19,9 @@
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_data/keyscan-davinci.h>
#include <linux/platform_data/spi-davinci.h>
#include <asm/mach/map.h>
......@@ -29,9 +32,6 @@
#include <mach/time.h>
#include <mach/serial.h>
#include <mach/common.h>
#include <linux/platform_data/keyscan-davinci.h>
#include <linux/platform_data/spi-davinci.h>
#include <mach/gpio-davinci.h>
#include "davinci.h"
#include "clock.h"
......@@ -698,6 +698,32 @@ void __init dm365_init_spi0(unsigned chipselect_mask,
platform_device_register(&dm365_spi0_device);
}
static struct resource dm365_gpio_resources[] = {
{ /* registers */
.start = DAVINCI_GPIO_BASE,
.end = DAVINCI_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
{ /* interrupt */
.start = IRQ_DM365_GPIO0,
.end = IRQ_DM365_GPIO7,
.flags = IORESOURCE_IRQ,
},
};
static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
.ngpio = 104,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
.gpio_unbanked = 8,
};
int __init dm365_gpio_register(void)
{
return davinci_gpio_register(dm365_gpio_resources,
sizeof(dm365_gpio_resources),
&dm365_gpio_platform_data);
}
static struct emac_platform_data dm365_emac_pdata = {
.ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET,
.ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET,
......@@ -1105,11 +1131,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
.intc_irq_prios = dm365_default_priorities,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
.timer_info = &dm365_timer_info,
.gpio_type = GPIO_TYPE_DAVINCI,
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 104,
.gpio_irq = IRQ_DM365_GPIO0,
.gpio_unbanked = 8, /* really 16 ... skip muxed GPIOs */
.emac_pdata = &dm365_emac_pdata,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
......
arch/arm/mach-davinci/dm644x.c
View file @ 53575aa9
......@@ -13,6 +13,7 @@
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach/map.h>
......@@ -23,7 +24,6 @@
#include <mach/time.h>
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/gpio-davinci.h>
#include "davinci.h"
#include "clock.h"
......@@ -771,6 +771,30 @@ static struct platform_device dm644x_vpbe_dev = {
},
};
static struct resource dm644_gpio_resources[] = {
{ /* registers */
.start = DAVINCI_GPIO_BASE,
.end = DAVINCI_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
{ /* interrupt */
.start = IRQ_GPIOBNK0,
.end = IRQ_GPIOBNK4,
.flags = IORESOURCE_IRQ,
},
};
static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
.ngpio = 71,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
};
int __init dm644x_gpio_register(void)
{
return davinci_gpio_register(dm644_gpio_resources,
sizeof(dm644_gpio_resources),
&dm644_gpio_platform_data);
}
/*----------------------------------------------------------------------*/
static struct map_desc dm644x_io_desc[] = {
......@@ -897,10 +921,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
.intc_irq_prios = dm644x_default_priorities,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
.timer_info = &dm644x_timer_info,
.gpio_type = GPIO_TYPE_DAVINCI,
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 71,
.gpio_irq = IRQ_GPIOBNK0,
.emac_pdata = &dm644x_emac_pdata,
.sram_dma = 0x00008000,
.sram_len = SZ_16K,
......
arch/arm/mach-davinci/dm646x.c
View file @ 53575aa9
......@@ -14,6 +14,7 @@
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach/map.h>
......@@ -24,7 +25,6 @@
#include <mach/time.h>
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/gpio-davinci.h>
#include "davinci.h"
#include "clock.h"
......@@ -748,6 +748,30 @@ static struct platform_device vpif_capture_dev = {
.num_resources = ARRAY_SIZE(vpif_capture_resource),
};
static struct resource dm646x_gpio_resources[] = {
{ /* registers */
.start = DAVINCI_GPIO_BASE,
.end = DAVINCI_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
{ /* interrupt */
.start = IRQ_DM646X_GPIOBNK0,
.end = IRQ_DM646X_GPIOBNK2,
.flags = IORESOURCE_IRQ,
},
};
static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
.ngpio = 43,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
};
int __init dm646x_gpio_register(void)
{
return davinci_gpio_register(dm646x_gpio_resources,
sizeof(dm646x_gpio_resources),
&dm646x_gpio_platform_data);
}
/*----------------------------------------------------------------------*/
static struct map_desc dm646x_io_desc[] = {
......@@ -874,10 +898,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
.intc_irq_prios = dm646x_default_priorities,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
.timer_info = &dm646x_timer_info,
.gpio_type = GPIO_TYPE_DAVINCI,
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 43, /* Only 33 usable */
.gpio_irq = IRQ_DM646X_GPIOBNK0,
.emac_pdata = &dm646x_emac_pdata,
.sram_dma = 0x10010000,
.sram_len = SZ_32K,
......
arch/arm/mach-davinci/include/mach/da8xx.h
View file @ 53575aa9
......@@ -97,6 +97,7 @@ int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
int da850_register_mmcsd1(struct davinci_mmc_config *config);
void da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
int da8xx_register_rtc(void);
int da8xx_register_gpio(void *pdata);
int da850_register_cpufreq(char *async_clk);
int da8xx_register_cpuidle(void);
void __iomem *da8xx_get_mem_ctlr(void);
......@@ -110,6 +111,8 @@ int da850_register_vpif_capture
void da8xx_restart(enum reboot_mode mode, const char *cmd);
void da8xx_rproc_reserve_cma(void);
int da8xx_register_rproc(void);
int da850_register_gpio(void);
int da830_register_gpio(void);
extern struct platform_device da8xx_serial_device[];
extern struct emac_platform_data da8xx_emac_pdata;
......
arch/arm/mach-davinci/include/mach/gpio-davinci.h deleted 100644 → 0
View file @ d5aabbca
/*
* TI DaVinci GPIO Support
*
* Copyright (c) 2006 David Brownell
* Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __DAVINCI_DAVINCI_GPIO_H
#define __DAVINCI_DAVINCI_GPIO_H
#include <linux/io.h>
#include <linux/spinlock.h>
#include <asm-generic/gpio.h>
#include <mach/irqs.h>
#include <mach/common.h>
#define DAVINCI_GPIO_BASE 0x01C67000
enum davinci_gpio_type {
GPIO_TYPE_DAVINCI = 0,
GPIO_TYPE_TNETV107X,
};
/*
* basic gpio routines
*
* board-specific init should be done by arch/.../.../board-XXX.c (maybe
* initializing banks together) rather than boot loaders; kexec() won't
* go through boot loaders.
*
* the gpio clock will be turned on when gpios are used, and you may also
* need to pay attention to PINMUX registers to be sure those pins are
* used as gpios, not with other peripherals.
*
* On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
* and maybe for later updates, code may write GPIO(N). These may be
* all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
* may not support all the GPIOs in that range.
*
* GPIOs can also be on external chips, numbered after the ones built-in
* to the DaVinci chip. For now, they won't be usable as IRQ sources.
*/
#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
/* Convert GPIO signal to GPIO pin number */
#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
struct davinci_gpio_controller {
struct gpio_chip chip;
int irq_base;
spinlock_t lock;
void __iomem *regs;
void __iomem *set_data;
void __iomem *clr_data;
void __iomem *in_data;
};
/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
* with constant parameters; or in outlined code they execute at runtime.
*
* You'd access the controller directly when reading or writing more than
* one gpio value at a time, and to support wired logic where the value
* being driven by the cpu need not match the value read back.
*
* These are NOT part of the cross-platform GPIO interface
*/
static inline struct davinci_gpio_controller *
__gpio_to_controller(unsigned gpio)
{
struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
int index = gpio / 32;
if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
return NULL;
return ctlrs + index;
}
static inline u32 __gpio_mask(unsigned gpio)
{
return 1 << (gpio % 32);
}
#endif /* __DAVINCI_DAVINCI_GPIO_H */
arch/arm/mach-davinci/include/mach/gpio.h deleted 100644 → 0
View file @ d5aabbca
/*
* TI DaVinci GPIO Support
*
* Copyright (c) 2006 David Brownell
* Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __DAVINCI_GPIO_H
#define __DAVINCI_GPIO_H
#include <asm-generic/gpio.h>
#define __ARM_GPIOLIB_COMPLEX
/* The inline versions use the static inlines in the driver header */
#include "gpio-davinci.h"
/*
* The get/set/clear functions will inline when called with constant
* parameters referencing built-in GPIOs, for low-overhead bitbanging.
*
* gpio_set_value() will inline only on traditional Davinci style controllers
* with distinct set/clear registers.
*
* Otherwise, calls with variable parameters or referencing external
* GPIOs (e.g. on GPIO expander chips) use outlined functions.
*/
static inline void gpio_set_value(unsigned gpio, int value)
{
if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) {
struct davinci_gpio_controller *ctlr;
u32 mask;
ctlr = __gpio_to_controller(gpio);
if (ctlr->set_data != ctlr->clr_data) {
mask = __gpio_mask(gpio);
if (value)
__raw_writel(mask, ctlr->set_data);
else
__raw_writel(mask, ctlr->clr_data);
return;
}
}
__gpio_set_value(gpio, value);
}
/* Returns zero or nonzero; works for gpios configured as inputs OR
* as outputs, at least for built-in GPIOs.
*
* NOTE: for built-in GPIOs, changes in reported values are synchronized
* to the GPIO clock. This is easily seen after calling gpio_set_value()
* and then immediately gpio_get_value(), where the gpio_get_value() will
* return the old value until the GPIO clock ticks and the new value gets
* latched.
*/
static inline int gpio_get_value(unsigned gpio)
{
struct davinci_gpio_controller *ctlr;
if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num)
return __gpio_get_value(gpio);
ctlr = __gpio_to_controller(gpio);
return __gpio_mask(gpio) & __raw_readl(ctlr->in_data);
}
static inline int gpio_cansleep(unsigned gpio)
{
if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num)
return 0;
else
return __gpio_cansleep(gpio);
}
static inline int irq_to_gpio(unsigned irq)
{
/* don't support the reverse mapping */
return -ENOSYS;
}
#endif /* __DAVINCI_GPIO_H */
arch/arm/mach-dove/board-dt.c
View file @ 53575aa9
......@@ -19,35 +19,6 @@
#include <plat/common.h>
#include "common.h"
/*
* There are still devices that doesn't even know about DT,
* get clock gates here and add a clock lookup.
*/
static void __init dove_legacy_clk_init(void)
{
struct device_node *np = of_find_compatible_node(NULL, NULL,
"marvell,dove-gating-clock");
struct of_phandle_args clkspec;
clkspec.np = np;
clkspec.args_count = 1;
clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
orion_clkdev_add("0", "pcie",
of_clk_get_from_provider(&clkspec));
clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
orion_clkdev_add("1", "pcie",
of_clk_get_from_provider(&clkspec));
}
static void __init dove_dt_init_early(void)
{
mvebu_mbus_init("marvell,dove-mbus",
BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ);
}
static void __init dove_dt_init(void)
{
pr_info("Dove 88AP510 SoC\n");
......@@ -55,14 +26,7 @@ static void __init dove_dt_init(void)
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init(0);
#endif
dove_setup_cpu_wins();
/* Setup clocks for legacy devices */
dove_legacy_clk_init();
/* Internal devices not ported to DT yet */
dove_pcie_init(1, 1);
BUG_ON(mvebu_mbus_dt_init());
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
......@@ -73,7 +37,6 @@ static const char * const dove_dt_board_compat[] = {
DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
.map_io = dove_map_io,
.init_early = dove_dt_init_early,
.init_machine = dove_dt_init,
.restart = dove_restart,
.dt_compat = dove_dt_board_compat,
......
arch/arm/mach-s3c24xx/Kconfig
View file @ 53575aa9
......@@ -28,6 +28,7 @@ config CPU_S3C2410
select CPU_ARM920T
select CPU_LLSERIAL_S3C2410
select S3C2410_CLOCK
select S3C2410_DMA if S3C24XX_DMA
select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
select S3C2410_PM if PM
select SAMSUNG_WDT_RESET
......@@ -70,6 +71,7 @@ config CPU_S3C2442
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
select S3C2410_CLOCK
select S3C2410_DMA if S3C24XX_DMA
select S3C2410_PM if PM
help
Support for S3C2442 Samsung Mobile CPU based systems.
......@@ -148,7 +150,6 @@ config S3C2410_DMA_DEBUG
config S3C2410_DMA
bool
depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
default y if CPU_S3C2410 || CPU_S3C2442
help
DMA device selection for S3C2410 and compatible CPUs
......
arch/arm/mach-s3c24xx/clock-s3c2412.c
View file @ 53575aa9
......@@ -484,22 +484,22 @@ static struct clk init_clocks_disable[] = {
static struct clk init_clocks[] = {
{
.name = "dma",
.name = "dma.0",
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_DMA0,
}, {
.name = "dma",
.name = "dma.1",
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_DMA1,
}, {
.name = "dma",
.name = "dma.2",
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_DMA2,
}, {
.name = "dma",
.name = "dma.3",
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_DMA3,
......
arch/arm/mach-s3c24xx/common-s3c2443.c
View file @ 53575aa9
......@@ -438,32 +438,32 @@ static struct clk init_clocks_off[] = {
static struct clk init_clocks[] = {
{
.name = "dma",
.name = "dma.0",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA0,
}, {
.name = "dma",
.name = "dma.1",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA1,
}, {
.name = "dma",
.name = "dma.2",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA2,
}, {
.name = "dma",
.name = "dma.3",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA3,
}, {
.name = "dma",
.name = "dma.4",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA4,
}, {
.name = "dma",
.name = "dma.5",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA5,
......
arch/arm/mach-s3c24xx/common.c
View file @ 53575aa9
......@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/platform_data/dma-s3c24xx.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
......@@ -44,6 +45,7 @@
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
#include <mach/dma.h>
#include <plat/cpu.h>
#include <plat/devs.h>
......@@ -329,3 +331,207 @@ void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
clk_p.rate = pclk;
clk_f.rate = fclk;
}
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
static struct resource s3c2410_dma_resource[] = {
[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
[1] = DEFINE_RES_IRQ(IRQ_DMA0),
[2] = DEFINE_RES_IRQ(IRQ_DMA1),
[3] = DEFINE_RES_IRQ(IRQ_DMA2),
[4] = DEFINE_RES_IRQ(IRQ_DMA3),
};
#endif
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442)
static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
S3C24XX_DMA_CHANREQ(2, 2) |
S3C24XX_DMA_CHANREQ(1, 3),
},
[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
S3C24XX_DMA_CHANREQ(3, 2) |
S3C24XX_DMA_CHANREQ(3, 3),
},
[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
S3C24XX_DMA_CHANREQ(1, 2),
},
[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), },
[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
};
static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2410_dma_channels,
.num_channels = DMACH_MAX,
};
struct platform_device s3c2410_device_dma = {
.name = "s3c2410-dma",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2410_dma_resource),
.resource = s3c2410_dma_resource,
.dev = {
.platform_data = &s3c2410_dma_platdata,
},
};
#endif
#ifdef CONFIG_CPU_S3C2412
static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 },
[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 },
[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 },
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
};
static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2412_dma_channels,
.num_channels = DMACH_MAX,
};
struct platform_device s3c2412_device_dma = {
.name = "s3c2412-dma",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2410_dma_resource),
.resource = s3c2410_dma_resource,
.dev = {
.platform_data = &s3c2412_dma_platdata,
},
};
#endif
#if defined(CONFIG_CPU_S3C2440)
static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
S3C24XX_DMA_CHANREQ(6, 1) |
S3C24XX_DMA_CHANREQ(2, 2) |
S3C24XX_DMA_CHANREQ(1, 3),
},
[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
S3C24XX_DMA_CHANREQ(3, 2) |
S3C24XX_DMA_CHANREQ(3, 3),
},
[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
S3C24XX_DMA_CHANREQ(1, 2),
},
[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) |
S3C24XX_DMA_CHANREQ(0, 2),
},
[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) |
S3C24XX_DMA_CHANREQ(5, 2),
},
[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) |
S3C24XX_DMA_CHANREQ(6, 3),
},
[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) |
S3C24XX_DMA_CHANREQ(5, 3),
},
[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
};
static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2440_dma_channels,
.num_channels = DMACH_MAX,
};
struct platform_device s3c2440_device_dma = {
.name = "s3c2410-dma",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2410_dma_resource),
.resource = s3c2410_dma_resource,
.dev = {
.platform_data = &s3c2440_dma_platdata,
},
};
#endif
#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416)
static struct resource s3c2443_dma_resource[] = {
[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
[1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
[2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
[3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
[4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
[5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
[6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
};
static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
[DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 },
[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
[DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 },
[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 },
[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 },
[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
};
static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
.num_phy_channels = 6,
.channels = s3c2443_dma_channels,
.num_channels = DMACH_MAX,
};
struct platform_device s3c2443_device_dma = {
.name = "s3c2443-dma",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2443_dma_resource),
.resource = s3c2443_dma_resource,
.dev = {
.platform_data = &s3c2443_dma_platdata,
},
};
#endif
arch/arm/mach-s3c24xx/common.h
View file @ 53575aa9
......@@ -109,4 +109,9 @@ extern void s3c2443_init_irq(void);
extern struct syscore_ops s3c24xx_irq_syscore_ops;
extern struct platform_device s3c2410_device_dma;
extern struct platform_device s3c2412_device_dma;
extern struct platform_device s3c2440_device_dma;
extern struct platform_device s3c2443_device_dma;
#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
arch/arm/mach-s3c24xx/mach-jive.c
View file @ 53575aa9
......@@ -466,6 +466,7 @@ static struct platform_device *jive_devices[] __initdata = {
&jive_device_wm8750,
&s3c_device_nand,
&s3c_device_usbgadget,
&s3c2412_device_dma,
};
static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
......
arch/arm/mach-s3c24xx/mach-smdk2413.c
View file @ 53575aa9
......@@ -89,6 +89,7 @@ static struct platform_device *smdk2413_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_usbgadget,
&s3c2412_device_dma,
};
static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
......
arch/arm/mach-s3c24xx/mach-smdk2416.c
View file @ 53575aa9
......@@ -215,6 +215,7 @@ static struct platform_device *smdk2416_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_usb_hsudc,
&s3c2443_device_dma,
};
static void __init smdk2416_map_io(void)
......
arch/arm/mach-s3c24xx/mach-smdk2443.c
View file @ 53575aa9
......@@ -115,6 +115,7 @@ static struct platform_device *smdk2443_devices[] __initdata = {
#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
&s3c_device_ac97,
#endif
&s3c2443_device_dma,
};
static void __init smdk2443_map_io(void)
......
arch/arm/mach-s3c24xx/mach-vstms.c
View file @ 53575aa9
......@@ -126,6 +126,7 @@ static struct platform_device *vstms_devices[] __initdata = {
&s3c_device_iis,
&s3c_device_rtc,
&s3c_device_nand,
&s3c2412_device_dma,
};
static void __init vstms_fixup(struct tag *tags, char **cmdline,
......
arch/arm/plat-samsung/devs.c
View file @ 53575aa9
......@@ -32,6 +32,7 @@
#include <linux/ioport.h>
#include <linux/platform_data/s3c-hsudc.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/platform_data/dma-s3c24xx.h>
#include <media/s5p_hdmi.h>
......@@ -1465,8 +1466,10 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
#ifdef CONFIG_PL330_DMA
#if defined(CONFIG_PL330_DMA)
pd.filter = pl330_filter;
#elif defined(CONFIG_S3C24XX_DMAC)
pd.filter = s3c24xx_dma_filter;
#endif
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
......
drivers/bus/arm-cci.c
View file @ 53575aa9
......@@ -18,11 +18,21 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <asm/cacheflush.h>
#include <asm/irq_regs.h>
#include <asm/pmu.h>
#include <asm/smp_plat.h>
#define DRIVER_NAME "CCI-400"
#define DRIVER_NAME_PMU DRIVER_NAME " PMU"
#define PMU_NAME "CCI_400"
#define CCI_PORT_CTRL 0x0
#define CCI_CTRL_STATUS 0xc
......@@ -54,6 +64,568 @@ static unsigned int nb_cci_ports;
static void __iomem *cci_ctrl_base;
static unsigned long cci_ctrl_phys;
#ifdef CONFIG_HW_PERF_EVENTS
#define CCI_PMCR 0x0100
#define CCI_PID2 0x0fe8
#define CCI_PMCR_CEN 0x00000001
#define CCI_PMCR_NCNT_MASK 0x0000f800
#define CCI_PMCR_NCNT_SHIFT 11
#define CCI_PID2_REV_MASK 0xf0
#define CCI_PID2_REV_SHIFT 4
/* Port ids */
#define CCI_PORT_S0 0
#define CCI_PORT_S1 1
#define CCI_PORT_S2 2
#define CCI_PORT_S3 3
#define CCI_PORT_S4 4
#define CCI_PORT_M0 5
#define CCI_PORT_M1 6
#define CCI_PORT_M2 7
#define CCI_REV_R0 0
#define CCI_REV_R1 1
#define CCI_REV_R0_P4 4
#define CCI_REV_R1_P2 6
#define CCI_PMU_EVT_SEL 0x000
#define CCI_PMU_CNTR 0x004
#define CCI_PMU_CNTR_CTRL 0x008
#define CCI_PMU_OVRFLW 0x00c
#define CCI_PMU_OVRFLW_FLAG 1
#define CCI_PMU_CNTR_BASE(idx) ((idx) * SZ_4K)
/*
* Instead of an event id to monitor CCI cycles, a dedicated counter is
* provided. Use 0xff to represent CCI cycles and hope that no future revisions
* make use of this event in hardware.
*/
enum cci400_perf_events {
CCI_PMU_CYCLES = 0xff
};
#define CCI_PMU_EVENT_MASK 0xff
#define CCI_PMU_EVENT_SOURCE(event) ((event >> 5) & 0x7)
#define CCI_PMU_EVENT_CODE(event) (event & 0x1f)
#define CCI_PMU_MAX_HW_EVENTS 5 /* CCI PMU has 4 counters + 1 cycle counter */
#define CCI_PMU_CYCLE_CNTR_IDX 0
#define CCI_PMU_CNTR0_IDX 1
#define CCI_PMU_CNTR_LAST(cci_pmu) (CCI_PMU_CYCLE_CNTR_IDX + cci_pmu->num_events - 1)
/*
* CCI PMU event id is an 8-bit value made of two parts - bits 7:5 for one of 8
* ports and bits 4:0 are event codes. There are different event codes
* associated with each port type.
*
* Additionally, the range of events associated with the port types changed
* between Rev0 and Rev1.
*
* The constants below define the range of valid codes for each port type for
* the different revisions and are used to validate the event to be monitored.
*/
#define CCI_REV_R0_SLAVE_PORT_MIN_EV 0x00
#define CCI_REV_R0_SLAVE_PORT_MAX_EV 0x13
#define CCI_REV_R0_MASTER_PORT_MIN_EV 0x14
#define CCI_REV_R0_MASTER_PORT_MAX_EV 0x1a
#define CCI_REV_R1_SLAVE_PORT_MIN_EV 0x00
#define CCI_REV_R1_SLAVE_PORT_MAX_EV 0x14
#define CCI_REV_R1_MASTER_PORT_MIN_EV 0x00
#define CCI_REV_R1_MASTER_PORT_MAX_EV 0x11
struct pmu_port_event_ranges {
u8 slave_min;
u8 slave_max;
u8 master_min;
u8 master_max;
};
static struct pmu_port_event_ranges port_event_range[] = {
[CCI_REV_R0] = {
.slave_min = CCI_REV_R0_SLAVE_PORT_MIN_EV,
.slave_max = CCI_REV_R0_SLAVE_PORT_MAX_EV,
.master_min = CCI_REV_R0_MASTER_PORT_MIN_EV,
.master_max = CCI_REV_R0_MASTER_PORT_MAX_EV,
},
[CCI_REV_R1] = {
.slave_min = CCI_REV_R1_SLAVE_PORT_MIN_EV,
.slave_max = CCI_REV_R1_SLAVE_PORT_MAX_EV,
.master_min = CCI_REV_R1_MASTER_PORT_MIN_EV,
.master_max = CCI_REV_R1_MASTER_PORT_MAX_EV,
},
};
struct cci_pmu_drv_data {
void __iomem *base;
struct arm_pmu *cci_pmu;
int nr_irqs;
int irqs[CCI_PMU_MAX_HW_EVENTS];
unsigned long active_irqs;
struct perf_event *events[CCI_PMU_MAX_HW_EVENTS];
unsigned long used_mask[BITS_TO_LONGS(CCI_PMU_MAX_HW_EVENTS)];
struct pmu_port_event_ranges *port_ranges;
struct pmu_hw_events hw_events;
};
static struct cci_pmu_drv_data *pmu;
static bool is_duplicate_irq(int irq, int *irqs, int nr_irqs)
{
int i;
for (i = 0; i < nr_irqs; i++)
if (irq == irqs[i])
return true;
return false;
}
static int probe_cci_revision(void)
{
int rev;
rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK;
rev >>= CCI_PID2_REV_SHIFT;
if (rev <= CCI_REV_R0_P4)
return CCI_REV_R0;
else if (rev <= CCI_REV_R1_P2)
return CCI_REV_R1;
return -ENOENT;
}
static struct pmu_port_event_ranges *port_range_by_rev(void)
{
int rev = probe_cci_revision();
if (rev < 0)
return NULL;
return &port_event_range[rev];
}
static int pmu_is_valid_slave_event(u8 ev_code)
{
return pmu->port_ranges->slave_min <= ev_code &&
ev_code <= pmu->port_ranges->slave_max;
}
static int pmu_is_valid_master_event(u8 ev_code)
{
return pmu->port_ranges->master_min <= ev_code &&
ev_code <= pmu->port_ranges->master_max;
}
static int pmu_validate_hw_event(u8 hw_event)
{
u8 ev_source = CCI_PMU_EVENT_SOURCE(hw_event);
u8 ev_code = CCI_PMU_EVENT_CODE(hw_event);
switch (ev_source) {
case CCI_PORT_S0:
case CCI_PORT_S1:
case CCI_PORT_S2:
case CCI_PORT_S3:
case CCI_PORT_S4:
/* Slave Interface */
if (pmu_is_valid_slave_event(ev_code))
return hw_event;
break;
case CCI_PORT_M0:
case CCI_PORT_M1:
case CCI_PORT_M2:
/* Master Interface */
if (pmu_is_valid_master_event(ev_code))
return hw_event;
break;
}
return -ENOENT;
}
static int pmu_is_valid_counter(struct arm_pmu *cci_pmu, int idx)
{
return CCI_PMU_CYCLE_CNTR_IDX <= idx &&
idx <= CCI_PMU_CNTR_LAST(cci_pmu);
}
static u32 pmu_read_register(int idx, unsigned int offset)
{
return readl_relaxed(pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
}
static void pmu_write_register(u32 value, int idx, unsigned int offset)
{
return writel_relaxed(value, pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
}
static void pmu_disable_counter(int idx)
{
pmu_write_register(0, idx, CCI_PMU_CNTR_CTRL);
}
static void pmu_enable_counter(int idx)
{
pmu_write_register(1, idx, CCI_PMU_CNTR_CTRL);
}
static void pmu_set_event(int idx, unsigned long event)
{
event &= CCI_PMU_EVENT_MASK;
pmu_write_register(event, idx, CCI_PMU_EVT_SEL);
}
static u32 pmu_get_max_counters(void)
{
u32 n_cnts = (readl_relaxed(cci_ctrl_base + CCI_PMCR) &
CCI_PMCR_NCNT_MASK) >> CCI_PMCR_NCNT_SHIFT;
/* add 1 for cycle counter */
return n_cnts + 1;
}
static struct pmu_hw_events *pmu_get_hw_events(void)
{
return &pmu->hw_events;
}
static int pmu_get_event_idx(struct pmu_hw_events *hw, struct perf_event *event)
{
struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hw_event = &event->hw;
unsigned long cci_event = hw_event->config_base & CCI_PMU_EVENT_MASK;
int idx;
if (cci_event == CCI_PMU_CYCLES) {
if (test_and_set_bit(CCI_PMU_CYCLE_CNTR_IDX, hw->used_mask))
return -EAGAIN;
return CCI_PMU_CYCLE_CNTR_IDX;
}
for (idx = CCI_PMU_CNTR0_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); ++idx)
if (!test_and_set_bit(idx, hw->used_mask))
return idx;
/* No counters available */
return -EAGAIN;
}
static int pmu_map_event(struct perf_event *event)
{
int mapping;
u8 config = event->attr.config & CCI_PMU_EVENT_MASK;
if (event->attr.type < PERF_TYPE_MAX)
return -ENOENT;
if (config == CCI_PMU_CYCLES)
mapping = config;
else
mapping = pmu_validate_hw_event(config);
return mapping;
}
static int pmu_request_irq(struct arm_pmu *cci_pmu, irq_handler_t handler)
{
int i;
struct platform_device *pmu_device = cci_pmu->plat_device;
if (unlikely(!pmu_device))
return -ENODEV;
if (pmu->nr_irqs < 1) {
dev_err(&pmu_device->dev, "no irqs for CCI PMUs defined\n");
return -ENODEV;
}
/*
* Register all available CCI PMU interrupts. In the interrupt handler
* we iterate over the counters checking for interrupt source (the
* overflowing counter) and clear it.
*
* This should allow handling of non-unique interrupt for the counters.
*/
for (i = 0; i < pmu->nr_irqs; i++) {
int err = request_irq(pmu->irqs[i], handler, IRQF_SHARED,
"arm-cci-pmu", cci_pmu);
if (err) {
dev_err(&pmu_device->dev, "unable to request IRQ%d for ARM CCI PMU counters\n",
pmu->irqs[i]);
return err;
}
set_bit(i, &pmu->active_irqs);
}
return 0;
}
static irqreturn_t pmu_handle_irq(int irq_num, void *dev)
{
unsigned long flags;
struct arm_pmu *cci_pmu = (struct arm_pmu *)dev;
struct pmu_hw_events *events = cci_pmu->get_hw_events();
struct perf_sample_data data;
struct pt_regs *regs;
int idx, handled = IRQ_NONE;
raw_spin_lock_irqsave(&events->pmu_lock, flags);
regs = get_irq_regs();
/*
* Iterate over counters and update the corresponding perf events.
* This should work regardless of whether we have per-counter overflow
* interrupt or a combined overflow interrupt.
*/
for (idx = CCI_PMU_CYCLE_CNTR_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); idx++) {
struct perf_event *event = events->events[idx];
struct hw_perf_event *hw_counter;
if (!event)
continue;
hw_counter = &event->hw;
/* Did this counter overflow? */
if (!pmu_read_register(idx, CCI_PMU_OVRFLW) & CCI_PMU_OVRFLW_FLAG)
continue;
pmu_write_register(CCI_PMU_OVRFLW_FLAG, idx, CCI_PMU_OVRFLW);
handled = IRQ_HANDLED;
armpmu_event_update(event);
perf_sample_data_init(&data, 0, hw_counter->last_period);
if (!armpmu_event_set_period(event))
continue;
if (perf_event_overflow(event, &data, regs))
cci_pmu->disable(event);
}
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
return IRQ_RETVAL(handled);
}
static void pmu_free_irq(struct arm_pmu *cci_pmu)
{
int i;
for (i = 0; i < pmu->nr_irqs; i++) {
if (!test_and_clear_bit(i, &pmu->active_irqs))
continue;
free_irq(pmu->irqs[i], cci_pmu);
}
}
static void pmu_enable_event(struct perf_event *event)
{
unsigned long flags;
struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
struct pmu_hw_events *events = cci_pmu->get_hw_events();
struct hw_perf_event *hw_counter = &event->hw;
int idx = hw_counter->idx;
if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
return;
}
raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Configure the event to count, unless you are counting cycles */
if (idx != CCI_PMU_CYCLE_CNTR_IDX)
pmu_set_event(idx, hw_counter->config_base);
pmu_enable_counter(idx);
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void pmu_disable_event(struct perf_event *event)
{
struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hw_counter = &event->hw;
int idx = hw_counter->idx;
if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
return;
}
pmu_disable_counter(idx);
}
static void pmu_start(struct arm_pmu *cci_pmu)
{
u32 val;
unsigned long flags;
struct pmu_hw_events *events = cci_pmu->get_hw_events();
raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Enable all the PMU counters. */
val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN;
writel(val, cci_ctrl_base + CCI_PMCR);
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void pmu_stop(struct arm_pmu *cci_pmu)
{
u32 val;
unsigned long flags;
struct pmu_hw_events *events = cci_pmu->get_hw_events();
raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Disable all the PMU counters. */
val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN;
writel(val, cci_ctrl_base + CCI_PMCR);
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static u32 pmu_read_counter(struct perf_event *event)
{
struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hw_counter = &event->hw;
int idx = hw_counter->idx;
u32 value;
if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
return 0;
}
value = pmu_read_register(idx, CCI_PMU_CNTR);
return value;
}
static void pmu_write_counter(struct perf_event *event, u32 value)
{
struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hw_counter = &event->hw;
int idx = hw_counter->idx;
if (unlikely(!pmu_is_valid_counter(cci_pmu, idx)))
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
else
pmu_write_register(value, idx, CCI_PMU_CNTR);
}
static int cci_pmu_init(struct arm_pmu *cci_pmu, struct platform_device *pdev)
{
*cci_pmu = (struct arm_pmu){
.name = PMU_NAME,
.max_period = (1LLU << 32) - 1,
.get_hw_events = pmu_get_hw_events,
.get_event_idx = pmu_get_event_idx,
.map_event = pmu_map_event,
.request_irq = pmu_request_irq,
.handle_irq = pmu_handle_irq,
.free_irq = pmu_free_irq,
.enable = pmu_enable_event,
.disable = pmu_disable_event,
.start = pmu_start,
.stop = pmu_stop,
.read_counter = pmu_read_counter,
.write_counter = pmu_write_counter,
};
cci_pmu->plat_device = pdev;
cci_pmu->num_events = pmu_get_max_counters();
return armpmu_register(cci_pmu, -1);
}
static const struct of_device_id arm_cci_pmu_matches[] = {
{
.compatible = "arm,cci-400-pmu",
},
{},
};
static int cci_pmu_probe(struct platform_device *pdev)
{
struct resource *res;
int i, ret, irq;
pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
if (!pmu)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pmu->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(pmu->base))
return -ENOMEM;
/*
* CCI PMU has 5 overflow signals - one per counter; but some may be tied
* together to a common interrupt.
*/
pmu->nr_irqs = 0;
for (i = 0; i < CCI_PMU_MAX_HW_EVENTS; i++) {
irq = platform_get_irq(pdev, i);
if (irq < 0)
break;
if (is_duplicate_irq(irq, pmu->irqs, pmu->nr_irqs))
continue;
pmu->irqs[pmu->nr_irqs++] = irq;
}
/*
* Ensure that the device tree has as many interrupts as the number
* of counters.
*/
if (i < CCI_PMU_MAX_HW_EVENTS) {
dev_warn(&pdev->dev, "In-correct number of interrupts: %d, should be %d\n",
i, CCI_PMU_MAX_HW_EVENTS);
return -EINVAL;
}
pmu->port_ranges = port_range_by_rev();
if (!pmu->port_ranges) {
dev_warn(&pdev->dev, "CCI PMU version not supported\n");
return -EINVAL;
}
pmu->cci_pmu = devm_kzalloc(&pdev->dev, sizeof(*(pmu->cci_pmu)), GFP_KERNEL);
if (!pmu->cci_pmu)
return -ENOMEM;
pmu->hw_events.events = pmu->events;
pmu->hw_events.used_mask = pmu->used_mask;
raw_spin_lock_init(&pmu->hw_events.pmu_lock);
ret = cci_pmu_init(pmu->cci_pmu, pdev);
if (ret)
return ret;
return 0;
}
static int cci_platform_probe(struct platform_device *pdev)
{
if (!cci_probed())
return -ENODEV;
return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
}
#endif /* CONFIG_HW_PERF_EVENTS */
struct cpu_port {
u64 mpidr;
u32 port;
......@@ -120,7 +692,7 @@ int cci_ace_get_port(struct device_node *dn)
}
EXPORT_SYMBOL_GPL(cci_ace_get_port);
static void __init cci_ace_init_ports(void)
static void cci_ace_init_ports(void)
{
int port, cpu;
struct device_node *cpun;
......@@ -386,7 +958,7 @@ static const struct of_device_id arm_cci_ctrl_if_matches[] = {
{},
};
static int __init cci_probe(void)
static int cci_probe(void)
{
struct cci_nb_ports const *cci_config;
int ret, i, nb_ace = 0, nb_ace_lite = 0;
......@@ -490,7 +1062,7 @@ static int __init cci_probe(void)
static int cci_init_status = -EAGAIN;
static DEFINE_MUTEX(cci_probing);
static int __init cci_init(void)
static int cci_init(void)
{
if (cci_init_status != -EAGAIN)
return cci_init_status;
......@@ -502,18 +1074,55 @@ static int __init cci_init(void)
return cci_init_status;
}
#ifdef CONFIG_HW_PERF_EVENTS
static struct platform_driver cci_pmu_driver = {
.driver = {
.name = DRIVER_NAME_PMU,
.of_match_table = arm_cci_pmu_matches,
},
.probe = cci_pmu_probe,
};
static struct platform_driver cci_platform_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = arm_cci_matches,
},
.probe = cci_platform_probe,
};
static int __init cci_platform_init(void)
{
int ret;
ret = platform_driver_register(&cci_pmu_driver);
if (ret)
return ret;
return platform_driver_register(&cci_platform_driver);
}
#else
static int __init cci_platform_init(void)
{
return 0;
}
#endif
/*
* To sort out early init calls ordering a helper function is provided to
* check if the CCI driver has beed initialized. Function check if the driver
* has been initialized, if not it calls the init function that probes
* the driver and updates the return value.
*/
bool __init cci_probed(void)
bool cci_probed(void)
{
return cci_init() == 0;
}
EXPORT_SYMBOL_GPL(cci_probed);
early_initcall(cci_init);
core_initcall(cci_platform_init);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ARM CCI support");
drivers/dma/Kconfig
View file @ 53575aa9
......@@ -154,6 +154,18 @@ config TEGRA20_APB_DMA
This DMA controller transfers data from memory to peripheral fifo
or vice versa. It does not support memory to memory data transfer.
config S3C24XX_DMAC
tristate "Samsung S3C24XX DMA support"
depends on ARCH_S3C24XX && !S3C24XX_DMA
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Support for the Samsung S3C24XX DMA controller driver. The
DMA controller is having multiple DMA channels which can be
configured for different peripherals like audio, UART, SPI.
The DMA controller can transfer data from memory to peripheral,
periphal to memory, periphal to periphal and memory to memory.
source "drivers/dma/sh/Kconfig"
config COH901318
......
drivers/dma/Makefile
View file @ 53575aa9
......@@ -30,6 +30,7 @@ obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
obj-$(CONFIG_TI_EDMA) += edma.o
obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
obj-$(CONFIG_PL330_DMA) += pl330.o
obj-$(CONFIG_PCH_DMA) += pch_dma.o
obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
......
drivers/dma/s3c24xx-dma.c 0 → 100644
View file @ 53575aa9
/*
* S3C24XX DMA handling
*
* Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
*
* based on amba-pl08x.c
*
* Copyright (c) 2006 ARM Ltd.
* Copyright (c) 2010 ST-Ericsson SA
*
* Author: Peter Pearse <peter.pearse@arm.com>
* Author: Linus Walleij <linus.walleij@stericsson.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* The DMA controllers in S3C24XX SoCs have a varying number of DMA signals
* that can be routed to any of the 4 to 8 hardware-channels.
*
* Therefore on these DMA controllers the number of channels
* and the number of incoming DMA signals are two totally different things.
* It is usually not possible to theoretically handle all physical signals,
* so a multiplexing scheme with possible denial of use is necessary.
*
* Open items:
* - bursts
*/
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/platform_data/dma-s3c24xx.h>
#include "dmaengine.h"
#include "virt-dma.h"
#define MAX_DMA_CHANNELS 8
#define S3C24XX_DISRC 0x00
#define S3C24XX_DISRCC 0x04
#define S3C24XX_DISRCC_INC_INCREMENT 0
#define S3C24XX_DISRCC_INC_FIXED BIT(0)
#define S3C24XX_DISRCC_LOC_AHB 0
#define S3C24XX_DISRCC_LOC_APB BIT(1)
#define S3C24XX_DIDST 0x08
#define S3C24XX_DIDSTC 0x0c
#define S3C24XX_DIDSTC_INC_INCREMENT 0
#define S3C24XX_DIDSTC_INC_FIXED BIT(0)
#define S3C24XX_DIDSTC_LOC_AHB 0
#define S3C24XX_DIDSTC_LOC_APB BIT(1)
#define S3C24XX_DIDSTC_INT_TC0 0
#define S3C24XX_DIDSTC_INT_RELOAD BIT(2)
#define S3C24XX_DCON 0x10
#define S3C24XX_DCON_TC_MASK 0xfffff
#define S3C24XX_DCON_DSZ_BYTE (0 << 20)
#define S3C24XX_DCON_DSZ_HALFWORD (1 << 20)
#define S3C24XX_DCON_DSZ_WORD (2 << 20)
#define S3C24XX_DCON_DSZ_MASK (3 << 20)
#define S3C24XX_DCON_DSZ_SHIFT 20
#define S3C24XX_DCON_AUTORELOAD 0
#define S3C24XX_DCON_NORELOAD BIT(22)
#define S3C24XX_DCON_HWTRIG BIT(23)
#define S3C24XX_DCON_HWSRC_SHIFT 24
#define S3C24XX_DCON_SERV_SINGLE 0
#define S3C24XX_DCON_SERV_WHOLE BIT(27)
#define S3C24XX_DCON_TSZ_UNIT 0
#define S3C24XX_DCON_TSZ_BURST4 BIT(28)
#define S3C24XX_DCON_INT BIT(29)
#define S3C24XX_DCON_SYNC_PCLK 0
#define S3C24XX_DCON_SYNC_HCLK BIT(30)
#define S3C24XX_DCON_DEMAND 0
#define S3C24XX_DCON_HANDSHAKE BIT(31)
#define S3C24XX_DSTAT 0x14
#define S3C24XX_DSTAT_STAT_BUSY BIT(20)
#define S3C24XX_DSTAT_CURRTC_MASK 0xfffff
#define S3C24XX_DMASKTRIG 0x20
#define S3C24XX_DMASKTRIG_SWTRIG BIT(0)
#define S3C24XX_DMASKTRIG_ON BIT(1)
#define S3C24XX_DMASKTRIG_STOP BIT(2)
#define S3C24XX_DMAREQSEL 0x24
#define S3C24XX_DMAREQSEL_HW BIT(0)
/*
* S3C2410, S3C2440 and S3C2442 SoCs cannot select any physical channel
* for a DMA source. Instead only specific channels are valid.
* All of these SoCs have 4 physical channels and the number of request
* source bits is 3. Additionally we also need 1 bit to mark the channel
* as valid.
* Therefore we separate the chansel element of the channel data into 4
* parts of 4 bits each, to hold the information if the channel is valid
* and the hw request source to use.
*
* Example:
* SDI is valid on channels 0, 2 and 3 - with varying hw request sources.
* For it the chansel field would look like
*
* ((BIT(3) | 1) << 3 * 4) | // channel 3, with request source 1
* ((BIT(3) | 2) << 2 * 4) | // channel 2, with request source 2
* ((BIT(3) | 2) << 0 * 4) // channel 0, with request source 2
*/
#define S3C24XX_CHANSEL_WIDTH 4
#define S3C24XX_CHANSEL_VALID BIT(3)
#define S3C24XX_CHANSEL_REQ_MASK 7
/*
* struct soc_data - vendor-specific config parameters for individual SoCs
* @stride: spacing between the registers of each channel
* @has_reqsel: does the controller use the newer requestselection mechanism
* @has_clocks: are controllable dma-clocks present
*/
struct soc_data {
int stride;
bool has_reqsel;
bool has_clocks;
};
/*
* enum s3c24xx_dma_chan_state - holds the virtual channel states
* @S3C24XX_DMA_CHAN_IDLE: the channel is idle
* @S3C24XX_DMA_CHAN_RUNNING: the channel has allocated a physical transport
* channel and is running a transfer on it
* @S3C24XX_DMA_CHAN_WAITING: the channel is waiting for a physical transport
* channel to become available (only pertains to memcpy channels)
*/
enum s3c24xx_dma_chan_state {
S3C24XX_DMA_CHAN_IDLE,
S3C24XX_DMA_CHAN_RUNNING,
S3C24XX_DMA_CHAN_WAITING,
};
/*
* struct s3c24xx_sg - structure containing data per sg
* @src_addr: src address of sg
* @dst_addr: dst address of sg
* @len: transfer len in bytes
* @node: node for txd's dsg_list
*/
struct s3c24xx_sg {
dma_addr_t src_addr;
dma_addr_t dst_addr;
size_t len;
struct list_head node;
};
/*
* struct s3c24xx_txd - wrapper for struct dma_async_tx_descriptor
* @vd: virtual DMA descriptor
* @dsg_list: list of children sg's
* @at: sg currently being transfered
* @width: transfer width
* @disrcc: value for source control register
* @didstc: value for destination control register
* @dcon: base value for dcon register
*/
struct s3c24xx_txd {
struct virt_dma_desc vd;
struct list_head dsg_list;
struct list_head *at;
u8 width;
u32 disrcc;
u32 didstc;
u32 dcon;
};
struct s3c24xx_dma_chan;
/*
* struct s3c24xx_dma_phy - holder for the physical channels
* @id: physical index to this channel
* @valid: does the channel have all required elements
* @base: virtual memory base (remapped) for the this channel
* @irq: interrupt for this channel
* @clk: clock for this channel
* @lock: a lock to use when altering an instance of this struct
* @serving: virtual channel currently being served by this physicalchannel
* @host: a pointer to the host (internal use)
*/
struct s3c24xx_dma_phy {
unsigned int id;
bool valid;
void __iomem *base;
unsigned int irq;
struct clk *clk;
spinlock_t lock;
struct s3c24xx_dma_chan *serving;
struct s3c24xx_dma_engine *host;
};
/*
* struct s3c24xx_dma_chan - this structure wraps a DMA ENGINE channel
* @id: the id of the channel
* @name: name of the channel
* @vc: wrappped virtual channel
* @phy: the physical channel utilized by this channel, if there is one
* @runtime_addr: address for RX/TX according to the runtime config
* @at: active transaction on this channel
* @lock: a lock for this channel data
* @host: a pointer to the host (internal use)
* @state: whether the channel is idle, running etc
* @slave: whether this channel is a device (slave) or for memcpy
*/
struct s3c24xx_dma_chan {
int id;
const char *name;
struct virt_dma_chan vc;
struct s3c24xx_dma_phy *phy;
struct dma_slave_config cfg;
struct s3c24xx_txd *at;
struct s3c24xx_dma_engine *host;
enum s3c24xx_dma_chan_state state;
bool slave;
};
/*
* struct s3c24xx_dma_engine - the local state holder for the S3C24XX
* @pdev: the corresponding platform device
* @pdata: platform data passed in from the platform/machine
* @base: virtual memory base (remapped)
* @slave: slave engine for this instance
* @memcpy: memcpy engine for this instance
* @phy_chans: array of data for the physical channels
*/
struct s3c24xx_dma_engine {
struct platform_device *pdev;
const struct s3c24xx_dma_platdata *pdata;
struct soc_data *sdata;
void __iomem *base;
struct dma_device slave;
struct dma_device memcpy;
struct s3c24xx_dma_phy *phy_chans;
};
/*
* Physical channel handling
*/
/*
* Check whether a certain channel is busy or not.
*/
static int s3c24xx_dma_phy_busy(struct s3c24xx_dma_phy *phy)
{
unsigned int val = readl(phy->base + S3C24XX_DSTAT);
return val & S3C24XX_DSTAT_STAT_BUSY;
}
static bool s3c24xx_dma_phy_valid(struct s3c24xx_dma_chan *s3cchan,
struct s3c24xx_dma_phy *phy)
{
struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id];
int phyvalid;
/* every phy is valid for memcopy channels */
if (!s3cchan->slave)
return true;
/* On newer variants all phys can be used for all virtual channels */
if (s3cdma->sdata->has_reqsel)
return true;
phyvalid = (cdata->chansel >> (phy->id * S3C24XX_CHANSEL_WIDTH));
return (phyvalid & S3C24XX_CHANSEL_VALID) ? true : false;
}
/*
* Allocate a physical channel for a virtual channel
*
* Try to locate a physical channel to be used for this transfer. If all
* are taken return NULL and the requester will have to cope by using
* some fallback PIO mode or retrying later.
*/
static
struct s3c24xx_dma_phy *s3c24xx_dma_get_phy(struct s3c24xx_dma_chan *s3cchan)
{
struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
struct s3c24xx_dma_channel *cdata;
struct s3c24xx_dma_phy *phy = NULL;
unsigned long flags;
int i;
int ret;
if (s3cchan->slave)
cdata = &pdata->channels[s3cchan->id];
for (i = 0; i < s3cdma->pdata->num_phy_channels; i++) {
phy = &s3cdma->phy_chans[i];
if (!phy->valid)
continue;
if (!s3c24xx_dma_phy_valid(s3cchan, phy))
continue;
spin_lock_irqsave(&phy->lock, flags);
if (!phy->serving) {
phy->serving = s3cchan;
spin_unlock_irqrestore(&phy->lock, flags);
break;
}
spin_unlock_irqrestore(&phy->lock, flags);
}
/* No physical channel available, cope with it */
if (i == s3cdma->pdata->num_phy_channels) {
dev_warn(&s3cdma->pdev->dev, "no phy channel available\n");
return NULL;
}
/* start the phy clock */
if (s3cdma->sdata->has_clocks) {
ret = clk_enable(phy->clk);
if (ret) {
dev_err(&s3cdma->pdev->dev, "could not enable clock for channel %d, err %d\n",
phy->id, ret);
phy->serving = NULL;
return NULL;
}
}
return phy;
}
/*
* Mark the physical channel as free.
*
* This drops the link between the physical and virtual channel.
*/
static inline void s3c24xx_dma_put_phy(struct s3c24xx_dma_phy *phy)
{
struct s3c24xx_dma_engine *s3cdma = phy->host;
if (s3cdma->sdata->has_clocks)
clk_disable(phy->clk);
phy->serving = NULL;
}
/*
* Stops the channel by writing the stop bit.
* This should not be used for an on-going transfer, but as a method of
* shutting down a channel (eg, when it's no longer used) or terminating a
* transfer.
*/
static void s3c24xx_dma_terminate_phy(struct s3c24xx_dma_phy *phy)
{
writel(S3C24XX_DMASKTRIG_STOP, phy->base + S3C24XX_DMASKTRIG);
}
/*
* Virtual channel handling
*/
static inline
struct s3c24xx_dma_chan *to_s3c24xx_dma_chan(struct dma_chan *chan)
{
return container_of(chan, struct s3c24xx_dma_chan, vc.chan);
}
static u32 s3c24xx_dma_getbytes_chan(struct s3c24xx_dma_chan *s3cchan)
{
struct s3c24xx_dma_phy *phy = s3cchan->phy;
struct s3c24xx_txd *txd = s3cchan->at;
u32 tc = readl(phy->base + S3C24XX_DSTAT) & S3C24XX_DSTAT_CURRTC_MASK;
return tc * txd->width;
}
static int s3c24xx_dma_set_runtime_config(struct s3c24xx_dma_chan *s3cchan,
struct dma_slave_config *config)
{
if (!s3cchan->slave)
return -EINVAL;
/* Reject definitely invalid configurations */
if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
return -EINVAL;
s3cchan->cfg = *config;
return 0;
}
/*
* Transfer handling
*/
static inline
struct s3c24xx_txd *to_s3c24xx_txd(struct dma_async_tx_descriptor *tx)
{
return container_of(tx, struct s3c24xx_txd, vd.tx);
}
static struct s3c24xx_txd *s3c24xx_dma_get_txd(void)
{
struct s3c24xx_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
if (txd) {
INIT_LIST_HEAD(&txd->dsg_list);
txd->dcon = S3C24XX_DCON_INT | S3C24XX_DCON_NORELOAD;
}
return txd;
}
static void s3c24xx_dma_free_txd(struct s3c24xx_txd *txd)
{
struct s3c24xx_sg *dsg, *_dsg;
list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) {
list_del(&dsg->node);
kfree(dsg);
}
kfree(txd);
}
static void s3c24xx_dma_start_next_sg(struct s3c24xx_dma_chan *s3cchan,
struct s3c24xx_txd *txd)
{
struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
struct s3c24xx_dma_phy *phy = s3cchan->phy;
const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
struct s3c24xx_sg *dsg = list_entry(txd->at, struct s3c24xx_sg, node);
u32 dcon = txd->dcon;
u32 val;
/* transfer-size and -count from len and width */
switch (txd->width) {
case 1:
dcon |= S3C24XX_DCON_DSZ_BYTE | dsg->len;
break;
case 2:
dcon |= S3C24XX_DCON_DSZ_HALFWORD | (dsg->len / 2);
break;
case 4:
dcon |= S3C24XX_DCON_DSZ_WORD | (dsg->len / 4);
break;
}
if (s3cchan->slave) {
struct s3c24xx_dma_channel *cdata =
&pdata->channels[s3cchan->id];
if (s3cdma->sdata->has_reqsel) {
writel_relaxed((cdata->chansel << 1) |
S3C24XX_DMAREQSEL_HW,
phy->base + S3C24XX_DMAREQSEL);
} else {
int csel = cdata->chansel >> (phy->id *
S3C24XX_CHANSEL_WIDTH);
csel &= S3C24XX_CHANSEL_REQ_MASK;
dcon |= csel << S3C24XX_DCON_HWSRC_SHIFT;
dcon |= S3C24XX_DCON_HWTRIG;
}
} else {
if (s3cdma->sdata->has_reqsel)
writel_relaxed(0, phy->base + S3C24XX_DMAREQSEL);
}
writel_relaxed(dsg->src_addr, phy->base + S3C24XX_DISRC);
writel_relaxed(txd->disrcc, phy->base + S3C24XX_DISRCC);
writel_relaxed(dsg->dst_addr, phy->base + S3C24XX_DIDST);
writel_relaxed(txd->didstc, phy->base + S3C24XX_DIDSTC);
writel_relaxed(dcon, phy->base + S3C24XX_DCON);
val = readl_relaxed(phy->base + S3C24XX_DMASKTRIG);
val &= ~S3C24XX_DMASKTRIG_STOP;
val |= S3C24XX_DMASKTRIG_ON;
/* trigger the dma operation for memcpy transfers */
if (!s3cchan->slave)
val |= S3C24XX_DMASKTRIG_SWTRIG;
writel(val, phy->base + S3C24XX_DMASKTRIG);
}
/*
* Set the initial DMA register values and start first sg.
*/
static void s3c24xx_dma_start_next_txd(struct s3c24xx_dma_chan *s3cchan)
{
struct s3c24xx_dma_phy *phy = s3cchan->phy;
struct virt_dma_desc *vd = vchan_next_desc(&s3cchan->vc);
struct s3c24xx_txd *txd = to_s3c24xx_txd(&vd->tx);
list_del(&txd->vd.node);
s3cchan->at = txd;
/* Wait for channel inactive */
while (s3c24xx_dma_phy_busy(phy))
cpu_relax();
/* point to the first element of the sg list */
txd->at = txd->dsg_list.next;
s3c24xx_dma_start_next_sg(s3cchan, txd);
}
static void s3c24xx_dma_free_txd_list(struct s3c24xx_dma_engine *s3cdma,
struct s3c24xx_dma_chan *s3cchan)
{
LIST_HEAD(head);
vchan_get_all_descriptors(&s3cchan->vc, &head);
vchan_dma_desc_free_list(&s3cchan->vc, &head);
}
/*
* Try to allocate a physical channel. When successful, assign it to
* this virtual channel, and initiate the next descriptor. The
* virtual channel lock must be held at this point.
*/
static void s3c24xx_dma_phy_alloc_and_start(struct s3c24xx_dma_chan *s3cchan)
{
struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
struct s3c24xx_dma_phy *phy;
phy = s3c24xx_dma_get_phy(s3cchan);
if (!phy) {
dev_dbg(&s3cdma->pdev->dev, "no physical channel available for xfer on %s\n",
s3cchan->name);
s3cchan->state = S3C24XX_DMA_CHAN_WAITING;
return;
}
dev_dbg(&s3cdma->pdev->dev, "allocated physical channel %d for xfer on %s\n",
phy->id, s3cchan->name);
s3cchan->phy = phy;
s3cchan->state = S3C24XX_DMA_CHAN_RUNNING;
s3c24xx_dma_start_next_txd(s3cchan);
}
static void s3c24xx_dma_phy_reassign_start(struct s3c24xx_dma_phy *phy,
struct s3c24xx_dma_chan *s3cchan)
{
struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
dev_dbg(&s3cdma->pdev->dev, "reassigned physical channel %d for xfer on %s\n",
phy->id, s3cchan->name);
/*
* We do this without taking the lock; we're really only concerned
* about whether this pointer is NULL or not, and we're guaranteed
* that this will only be called when it _already_ is non-NULL.
*/
phy->serving = s3cchan;
s3cchan->phy = phy;
s3cchan->state = S3C24XX_DMA_CHAN_RUNNING;
s3c24xx_dma_start_next_txd(s3cchan);
}
/*
* Free a physical DMA channel, potentially reallocating it to another
* virtual channel if we have any pending.
*/
static void s3c24xx_dma_phy_free(struct s3c24xx_dma_chan *s3cchan)
{
struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
struct s3c24xx_dma_chan *p, *next;
retry:
next = NULL;
/* Find a waiting virtual channel for the next transfer. */
list_for_each_entry(p, &s3cdma->memcpy.channels, vc.chan.device_node)
if (p->state == S3C24XX_DMA_CHAN_WAITING) {
next = p;
break;
}
if (!next) {
list_for_each_entry(p, &s3cdma->slave.channels,
vc.chan.device_node)
if (p->state == S3C24XX_DMA_CHAN_WAITING &&
s3c24xx_dma_phy_valid(p, s3cchan->phy)) {
next = p;
break;
}
}
/* Ensure that the physical channel is stopped */
s3c24xx_dma_terminate_phy(s3cchan->phy);
if (next) {
bool success;
/*
* Eww. We know this isn't going to deadlock
* but lockdep probably doesn't.
*/
spin_lock(&next->vc.lock);
/* Re-check the state now that we have the lock */
success = next->state == S3C24XX_DMA_CHAN_WAITING;
if (success)
s3c24xx_dma_phy_reassign_start(s3cchan->phy, next);
spin_unlock(&next->vc.lock);
/* If the state changed, try to find another channel */
if (!success)
goto retry;
} else {
/* No more jobs, so free up the physical channel */
s3c24xx_dma_put_phy(s3cchan->phy);
}
s3cchan->phy = NULL;
s3cchan->state = S3C24XX_DMA_CHAN_IDLE;
}
static void s3c24xx_dma_unmap_buffers(struct s3c24xx_txd *txd)
{
struct device *dev = txd->vd.tx.chan->device->dev;
struct s3c24xx_sg *dsg;
if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
if (txd->vd.tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
list_for_each_entry(dsg, &txd->dsg_list, node)
dma_unmap_single(dev, dsg->src_addr, dsg->len,
DMA_TO_DEVICE);
else {
list_for_each_entry(dsg, &txd->dsg_list, node)
dma_unmap_page(dev, dsg->src_addr, dsg->len,
DMA_TO_DEVICE);
}
}
if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
if (txd->vd.tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
list_for_each_entry(dsg, &txd->dsg_list, node)
dma_unmap_single(dev, dsg->dst_addr, dsg->len,
DMA_FROM_DEVICE);
else
list_for_each_entry(dsg, &txd->dsg_list, node)
dma_unmap_page(dev, dsg->dst_addr, dsg->len,
DMA_FROM_DEVICE);
}
}
static void s3c24xx_dma_desc_free(struct virt_dma_desc *vd)
{
struct s3c24xx_txd *txd = to_s3c24xx_txd(&vd->tx);
struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(vd->tx.chan);
if (!s3cchan->slave)
s3c24xx_dma_unmap_buffers(txd);
s3c24xx_dma_free_txd(txd);
}
static irqreturn_t s3c24xx_dma_irq(int irq, void *data)
{
struct s3c24xx_dma_phy *phy = data;
struct s3c24xx_dma_chan *s3cchan = phy->serving;
struct s3c24xx_txd *txd;
dev_dbg(&phy->host->pdev->dev, "interrupt on channel %d\n", phy->id);
/*
* Interrupts happen to notify the completion of a transfer and the
* channel should have moved into its stop state already on its own.
* Therefore interrupts on channels not bound to a virtual channel
* should never happen. Nevertheless send a terminate command to the
* channel if the unlikely case happens.
*/
if (unlikely(!s3cchan)) {
dev_err(&phy->host->pdev->dev, "interrupt on unused channel %d\n",
phy->id);
s3c24xx_dma_terminate_phy(phy);
return IRQ_HANDLED;
}
spin_lock(&s3cchan->vc.lock);
txd = s3cchan->at;
if (txd) {
/* when more sg's are in this txd, start the next one */
if (!list_is_last(txd->at, &txd->dsg_list)) {
txd->at = txd->at->next;
s3c24xx_dma_start_next_sg(s3cchan, txd);
} else {
s3cchan->at = NULL;
vchan_cookie_complete(&txd->vd);
/*
* And start the next descriptor (if any),
* otherwise free this channel.
*/
if (vchan_next_desc(&s3cchan->vc))
s3c24xx_dma_start_next_txd(s3cchan);
else
s3c24xx_dma_phy_free(s3cchan);
}
}
spin_unlock(&s3cchan->vc.lock);
return IRQ_HANDLED;
}
/*
* The DMA ENGINE API
*/
static int s3c24xx_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
unsigned long arg)
{
struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&s3cchan->vc.lock, flags);
switch (cmd) {
case DMA_SLAVE_CONFIG:
ret = s3c24xx_dma_set_runtime_config(s3cchan,
(struct dma_slave_config *)arg);
break;
case DMA_TERMINATE_ALL:
if (!s3cchan->phy && !s3cchan->at) {
dev_err(&s3cdma->pdev->dev, "trying to terminate already stopped channel %d\n",
s3cchan->id);
ret = -EINVAL;
break;
}
s3cchan->state = S3C24XX_DMA_CHAN_IDLE;
/* Mark physical channel as free */
if (s3cchan->phy)
s3c24xx_dma_phy_free(s3cchan);
/* Dequeue current job */
if (s3cchan->at) {
s3c24xx_dma_desc_free(&s3cchan->at->vd);
s3cchan->at = NULL;
}
/* Dequeue jobs not yet fired as well */
s3c24xx_dma_free_txd_list(s3cdma, s3cchan);
break;
default:
/* Unknown command */
ret = -ENXIO;
break;
}
spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
return ret;
}
static int s3c24xx_dma_alloc_chan_resources(struct dma_chan *chan)
{
return 0;
}
static void s3c24xx_dma_free_chan_resources(struct dma_chan *chan)
{
/* Ensure all queued descriptors are freed */
vchan_free_chan_resources(to_virt_chan(chan));
}
static enum dma_status s3c24xx_dma_tx_status(struct dma_chan *chan,
dma_cookie_t cookie, struct dma_tx_state *txstate)
{
struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
struct s3c24xx_txd *txd;
struct s3c24xx_sg *dsg;
struct virt_dma_desc *vd;
unsigned long flags;
enum dma_status ret;
size_t bytes = 0;
spin_lock_irqsave(&s3cchan->vc.lock, flags);
ret = dma_cookie_status(chan, cookie, txstate);
if (ret == DMA_SUCCESS) {
spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
return ret;
}
/*
* There's no point calculating the residue if there's
* no txstate to store the value.
*/
if (!txstate) {
spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
return ret;
}
vd = vchan_find_desc(&s3cchan->vc, cookie);
if (vd) {
/* On the issued list, so hasn't been processed yet */
txd = to_s3c24xx_txd(&vd->tx);
list_for_each_entry(dsg, &txd->dsg_list, node)
bytes += dsg->len;
} else {
/*
* Currently running, so sum over the pending sg's and
* the currently active one.
*/
txd = s3cchan->at;
dsg = list_entry(txd->at, struct s3c24xx_sg, node);
list_for_each_entry_from(dsg, &txd->dsg_list, node)
bytes += dsg->len;
bytes += s3c24xx_dma_getbytes_chan(s3cchan);
}
spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
/*
* This cookie not complete yet
* Get number of bytes left in the active transactions and queue
*/
dma_set_residue(txstate, bytes);
/* Whether waiting or running, we're in progress */
return ret;
}
/*
* Initialize a descriptor to be used by memcpy submit
*/
static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy(
struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
size_t len, unsigned long flags)
{
struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
struct s3c24xx_txd *txd;
struct s3c24xx_sg *dsg;
int src_mod, dest_mod;
dev_dbg(&s3cdma->pdev->dev, "prepare memcpy of %d bytes from %s\n",
len, s3cchan->name);
if ((len & S3C24XX_DCON_TC_MASK) != len) {
dev_err(&s3cdma->pdev->dev, "memcpy size %d to large\n", len);
return NULL;
}
txd = s3c24xx_dma_get_txd();
if (!txd)
return NULL;
dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT);
if (!dsg) {
s3c24xx_dma_free_txd(txd);
return NULL;
}
list_add_tail(&dsg->node, &txd->dsg_list);
dsg->src_addr = src;
dsg->dst_addr = dest;
dsg->len = len;
/*
* Determine a suitable transfer width.
* The DMA controller cannot fetch/store information which is not
* naturally aligned on the bus, i.e., a 4 byte fetch must start at
* an address divisible by 4 - more generally addr % width must be 0.
*/
src_mod = src % 4;
dest_mod = dest % 4;
switch (len % 4) {
case 0:
txd->width = (src_mod == 0 && dest_mod == 0) ? 4 : 1;
break;
case 2:
txd->width = ((src_mod == 2 || src_mod == 0) &&
(dest_mod == 2 || dest_mod == 0)) ? 2 : 1;
break;
default:
txd->width = 1;
break;
}
txd->disrcc = S3C24XX_DISRCC_LOC_AHB | S3C24XX_DISRCC_INC_INCREMENT;
txd->didstc = S3C24XX_DIDSTC_LOC_AHB | S3C24XX_DIDSTC_INC_INCREMENT;
txd->dcon |= S3C24XX_DCON_DEMAND | S3C24XX_DCON_SYNC_HCLK |
S3C24XX_DCON_SERV_WHOLE;
return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags);
}
static struct dma_async_tx_descriptor *s3c24xx_dma_prep_slave_sg(
struct dma_chan *chan, struct scatterlist *sgl,
unsigned int sg_len, enum dma_transfer_direction direction,
unsigned long flags, void *context)
{
struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id];
struct s3c24xx_txd *txd;
struct s3c24xx_sg *dsg;
struct scatterlist *sg;
dma_addr_t slave_addr;
u32 hwcfg = 0;
int tmp;
dev_dbg(&s3cdma->pdev->dev, "prepare transaction of %d bytes from %s\n",
sg_dma_len(sgl), s3cchan->name);
txd = s3c24xx_dma_get_txd();
if (!txd)
return NULL;
if (cdata->handshake)
txd->dcon |= S3C24XX_DCON_HANDSHAKE;
switch (cdata->bus) {
case S3C24XX_DMA_APB:
txd->dcon |= S3C24XX_DCON_SYNC_PCLK;
hwcfg |= S3C24XX_DISRCC_LOC_APB;
break;
case S3C24XX_DMA_AHB:
txd->dcon |= S3C24XX_DCON_SYNC_HCLK;
hwcfg |= S3C24XX_DISRCC_LOC_AHB;
break;
}
/*
* Always assume our peripheral desintation is a fixed
* address in memory.
*/
hwcfg |= S3C24XX_DISRCC_INC_FIXED;
/*
* Individual dma operations are requested by the slave,
* so serve only single atomic operations (S3C24XX_DCON_SERV_SINGLE).
*/
txd->dcon |= S3C24XX_DCON_SERV_SINGLE;
if (direction == DMA_MEM_TO_DEV) {
txd->disrcc = S3C24XX_DISRCC_LOC_AHB |
S3C24XX_DISRCC_INC_INCREMENT;
txd->didstc = hwcfg;
slave_addr = s3cchan->cfg.dst_addr;
txd->width = s3cchan->cfg.dst_addr_width;
} else if (direction == DMA_DEV_TO_MEM) {
txd->disrcc = hwcfg;
txd->didstc = S3C24XX_DIDSTC_LOC_AHB |
S3C24XX_DIDSTC_INC_INCREMENT;
slave_addr = s3cchan->cfg.src_addr;
txd->width = s3cchan->cfg.src_addr_width;
} else {
s3c24xx_dma_free_txd(txd);
dev_err(&s3cdma->pdev->dev,
"direction %d unsupported\n", direction);
return NULL;
}
for_each_sg(sgl, sg, sg_len, tmp) {
dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT);
if (!dsg) {
s3c24xx_dma_free_txd(txd);
return NULL;
}
list_add_tail(&dsg->node, &txd->dsg_list);
dsg->len = sg_dma_len(sg);
if (direction == DMA_MEM_TO_DEV) {
dsg->src_addr = sg_dma_address(sg);
dsg->dst_addr = slave_addr;
} else { /* DMA_DEV_TO_MEM */
dsg->src_addr = slave_addr;
dsg->dst_addr = sg_dma_address(sg);
}
break;
}
return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags);
}
/*
* Slave transactions callback to the slave device to allow
* synchronization of slave DMA signals with the DMAC enable
*/
static void s3c24xx_dma_issue_pending(struct dma_chan *chan)
{
struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
unsigned long flags;
spin_lock_irqsave(&s3cchan->vc.lock, flags);
if (vchan_issue_pending(&s3cchan->vc)) {
if (!s3cchan->phy && s3cchan->state != S3C24XX_DMA_CHAN_WAITING)
s3c24xx_dma_phy_alloc_and_start(s3cchan);
}
spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
}
/*
* Bringup and teardown
*/
/*
* Initialise the DMAC memcpy/slave channels.
* Make a local wrapper to hold required data
*/
static int s3c24xx_dma_init_virtual_channels(struct s3c24xx_dma_engine *s3cdma,
struct dma_device *dmadev, unsigned int channels, bool slave)
{
struct s3c24xx_dma_chan *chan;
int i;
INIT_LIST_HEAD(&dmadev->channels);
/*
* Register as many many memcpy as we have physical channels,
* we won't always be able to use all but the code will have
* to cope with that situation.
*/
for (i = 0; i < channels; i++) {
chan = devm_kzalloc(dmadev->dev, sizeof(*chan), GFP_KERNEL);
if (!chan) {
dev_err(dmadev->dev,
"%s no memory for channel\n", __func__);
return -ENOMEM;
}
chan->id = i;
chan->host = s3cdma;
chan->state = S3C24XX_DMA_CHAN_IDLE;
if (slave) {
chan->slave = true;
chan->name = kasprintf(GFP_KERNEL, "slave%d", i);
if (!chan->name)
return -ENOMEM;
} else {
chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i);
if (!chan->name)
return -ENOMEM;
}
dev_dbg(dmadev->dev,
"initialize virtual channel \"%s\"\n",
chan->name);
chan->vc.desc_free = s3c24xx_dma_desc_free;
vchan_init(&chan->vc, dmadev);
}
dev_info(dmadev->dev, "initialized %d virtual %s channels\n",
i, slave ? "slave" : "memcpy");
return i;
}
static void s3c24xx_dma_free_virtual_channels(struct dma_device *dmadev)
{
struct s3c24xx_dma_chan *chan = NULL;
struct s3c24xx_dma_chan *next;
list_for_each_entry_safe(chan,
next, &dmadev->channels, vc.chan.device_node)
list_del(&chan->vc.chan.device_node);
}
/* s3c2410, s3c2440 and s3c2442 have a 0x40 stride without separate clocks */
static struct soc_data soc_s3c2410 = {
.stride = 0x40,
.has_reqsel = false,
.has_clocks = false,
};
/* s3c2412 and s3c2413 have a 0x40 stride and dmareqsel mechanism */
static struct soc_data soc_s3c2412 = {
.stride = 0x40,
.has_reqsel = true,
.has_clocks = true,
};
/* s3c2443 and following have a 0x100 stride and dmareqsel mechanism */
static struct soc_data soc_s3c2443 = {
.stride = 0x100,
.has_reqsel = true,
.has_clocks = true,
};
static struct platform_device_id s3c24xx_dma_driver_ids[] = {
{
.name = "s3c2410-dma",
.driver_data = (kernel_ulong_t)&soc_s3c2410,
}, {
.name = "s3c2412-dma",
.driver_data = (kernel_ulong_t)&soc_s3c2412,
}, {
.name = "s3c2443-dma",
.driver_data = (kernel_ulong_t)&soc_s3c2443,
},
{ },
};
static struct soc_data *s3c24xx_dma_get_soc_data(struct platform_device *pdev)
{
return (struct soc_data *)
platform_get_device_id(pdev)->driver_data;
}
static int s3c24xx_dma_probe(struct platform_device *pdev)
{
const struct s3c24xx_dma_platdata *pdata = dev_get_platdata(&pdev->dev);
struct s3c24xx_dma_engine *s3cdma;
struct soc_data *sdata;
struct resource *res;
int ret;
int i;
if (!pdata) {
dev_err(&pdev->dev, "platform data missing\n");
return -ENODEV;
}
/* Basic sanity check */
if (pdata->num_phy_channels > MAX_DMA_CHANNELS) {
dev_err(&pdev->dev, "to many dma channels %d, max %d\n",
pdata->num_phy_channels, MAX_DMA_CHANNELS);
return -EINVAL;
}
sdata = s3c24xx_dma_get_soc_data(pdev);
if (!sdata)
return -EINVAL;
s3cdma = devm_kzalloc(&pdev->dev, sizeof(*s3cdma), GFP_KERNEL);
if (!s3cdma)
return -ENOMEM;
s3cdma->pdev = pdev;
s3cdma->pdata = pdata;
s3cdma->sdata = sdata;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
s3cdma->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(s3cdma->base))
return PTR_ERR(s3cdma->base);
s3cdma->phy_chans = devm_kzalloc(&pdev->dev,
sizeof(struct s3c24xx_dma_phy) *
pdata->num_phy_channels,
GFP_KERNEL);
if (!s3cdma->phy_chans)
return -ENOMEM;
/* aquire irqs and clocks for all physical channels */
for (i = 0; i < pdata->num_phy_channels; i++) {
struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i];
char clk_name[6];
phy->id = i;
phy->base = s3cdma->base + (i * sdata->stride);
phy->host = s3cdma;
phy->irq = platform_get_irq(pdev, i);
if (phy->irq < 0) {
dev_err(&pdev->dev, "failed to get irq %d, err %d\n",
i, phy->irq);
continue;
}
ret = devm_request_irq(&pdev->dev, phy->irq, s3c24xx_dma_irq,
0, pdev->name, phy);
if (ret) {
dev_err(&pdev->dev, "Unable to request irq for channel %d, error %d\n",
i, ret);
continue;
}
if (sdata->has_clocks) {
sprintf(clk_name, "dma.%d", i);
phy->clk = devm_clk_get(&pdev->dev, clk_name);
if (IS_ERR(phy->clk) && sdata->has_clocks) {
dev_err(&pdev->dev, "unable to aquire clock for channel %d, error %lu",
i, PTR_ERR(phy->clk));
continue;
}
ret = clk_prepare(phy->clk);
if (ret) {
dev_err(&pdev->dev, "clock for phy %d failed, error %d\n",
i, ret);
continue;
}
}
spin_lock_init(&phy->lock);
phy->valid = true;
dev_dbg(&pdev->dev, "physical channel %d is %s\n",
i, s3c24xx_dma_phy_busy(phy) ? "BUSY" : "FREE");
}
/* Initialize memcpy engine */
dma_cap_set(DMA_MEMCPY, s3cdma->memcpy.cap_mask);
dma_cap_set(DMA_PRIVATE, s3cdma->memcpy.cap_mask);
s3cdma->memcpy.dev = &pdev->dev;
s3cdma->memcpy.device_alloc_chan_resources =
s3c24xx_dma_alloc_chan_resources;
s3cdma->memcpy.device_free_chan_resources =
s3c24xx_dma_free_chan_resources;
s3cdma->memcpy.device_prep_dma_memcpy = s3c24xx_dma_prep_memcpy;
s3cdma->memcpy.device_tx_status = s3c24xx_dma_tx_status;
s3cdma->memcpy.device_issue_pending = s3c24xx_dma_issue_pending;
s3cdma->memcpy.device_control = s3c24xx_dma_control;
/* Initialize slave engine for SoC internal dedicated peripherals */
dma_cap_set(DMA_SLAVE, s3cdma->slave.cap_mask);
dma_cap_set(DMA_PRIVATE, s3cdma->slave.cap_mask);
s3cdma->slave.dev = &pdev->dev;
s3cdma->slave.device_alloc_chan_resources =
s3c24xx_dma_alloc_chan_resources;
s3cdma->slave.device_free_chan_resources =
s3c24xx_dma_free_chan_resources;
s3cdma->slave.device_tx_status = s3c24xx_dma_tx_status;
s3cdma->slave.device_issue_pending = s3c24xx_dma_issue_pending;
s3cdma->slave.device_prep_slave_sg = s3c24xx_dma_prep_slave_sg;
s3cdma->slave.device_control = s3c24xx_dma_control;
/* Register as many memcpy channels as there are physical channels */
ret = s3c24xx_dma_init_virtual_channels(s3cdma, &s3cdma->memcpy,
pdata->num_phy_channels, false);
if (ret <= 0) {
dev_warn(&pdev->dev,
"%s failed to enumerate memcpy channels - %d\n",
__func__, ret);
goto err_memcpy;
}
/* Register slave channels */
ret = s3c24xx_dma_init_virtual_channels(s3cdma, &s3cdma->slave,
pdata->num_channels, true);
if (ret <= 0) {
dev_warn(&pdev->dev,
"%s failed to enumerate slave channels - %d\n",
__func__, ret);
goto err_slave;
}
ret = dma_async_device_register(&s3cdma->memcpy);
if (ret) {
dev_warn(&pdev->dev,
"%s failed to register memcpy as an async device - %d\n",
__func__, ret);
goto err_memcpy_reg;
}
ret = dma_async_device_register(&s3cdma->slave);
if (ret) {
dev_warn(&pdev->dev,
"%s failed to register slave as an async device - %d\n",
__func__, ret);
goto err_slave_reg;
}
platform_set_drvdata(pdev, s3cdma);
dev_info(&pdev->dev, "Loaded dma driver with %d physical channels\n",
pdata->num_phy_channels);
return 0;
err_slave_reg:
dma_async_device_unregister(&s3cdma->memcpy);
err_memcpy_reg:
s3c24xx_dma_free_virtual_channels(&s3cdma->slave);
err_slave:
s3c24xx_dma_free_virtual_channels(&s3cdma->memcpy);
err_memcpy:
if (sdata->has_clocks)
for (i = 0; i < pdata->num_phy_channels; i++) {
struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i];
if (phy->valid)
clk_unprepare(phy->clk);
}
return ret;
}
static int s3c24xx_dma_remove(struct platform_device *pdev)
{
const struct s3c24xx_dma_platdata *pdata = dev_get_platdata(&pdev->dev);
struct s3c24xx_dma_engine *s3cdma = platform_get_drvdata(pdev);
struct soc_data *sdata = s3c24xx_dma_get_soc_data(pdev);
int i;
dma_async_device_unregister(&s3cdma->slave);
dma_async_device_unregister(&s3cdma->memcpy);
s3c24xx_dma_free_virtual_channels(&s3cdma->slave);
s3c24xx_dma_free_virtual_channels(&s3cdma->memcpy);
if (sdata->has_clocks)
for (i = 0; i < pdata->num_phy_channels; i++) {
struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i];
if (phy->valid)
clk_unprepare(phy->clk);
}
return 0;
}
static struct platform_driver s3c24xx_dma_driver = {
.driver = {
.name = "s3c24xx-dma",
.owner = THIS_MODULE,
},
.id_table = s3c24xx_dma_driver_ids,
.probe = s3c24xx_dma_probe,
.remove = s3c24xx_dma_remove,
};
module_platform_driver(s3c24xx_dma_driver);
bool s3c24xx_dma_filter(struct dma_chan *chan, void *param)
{
struct s3c24xx_dma_chan *s3cchan;
if (chan->device->dev->driver != &s3c24xx_dma_driver.driver)
return false;
s3cchan = to_s3c24xx_dma_chan(chan);
return s3cchan->id == (int)param;
}
EXPORT_SYMBOL(s3c24xx_dma_filter);
MODULE_DESCRIPTION("S3C24XX DMA Driver");
MODULE_AUTHOR("Heiko Stuebner");
MODULE_LICENSE("GPL v2");
drivers/gpio/gpio-davinci.c
View file @ 53575aa9
......@@ -15,8 +15,9 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <asm/mach/irq.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/platform_data/gpio-davinci.h>
struct davinci_gpio_regs {
u32 dir;
......@@ -31,13 +32,14 @@ struct davinci_gpio_regs {
u32 intstat;
};
#define BINTEN 0x8 /* GPIO Interrupt Per-Bank Enable Register */
#define chip2controller(chip) \
container_of(chip, struct davinci_gpio_controller, chip)
static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
static void __iomem *gpio_base;
static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
static struct davinci_gpio_regs __iomem *gpio2regs(unsigned gpio)
{
void __iomem *ptr;
......@@ -65,7 +67,7 @@ static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
return g;
}
static int __init davinci_gpio_irq_setup(void);
static int davinci_gpio_irq_setup(struct platform_device *pdev);
/*--------------------------------------------------------------------------*/
......@@ -131,33 +133,53 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
__raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
}
static int __init davinci_gpio_setup(void)
static int davinci_gpio_probe(struct platform_device *pdev)
{
int i, base;
unsigned ngpio;
struct davinci_soc_info *soc_info = &davinci_soc_info;
struct davinci_gpio_regs *regs;
if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
return 0;
struct davinci_gpio_controller *chips;
struct davinci_gpio_platform_data *pdata;
struct davinci_gpio_regs __iomem *regs;
struct device *dev = &pdev->dev;
struct resource *res;
pdata = dev->platform_data;
if (!pdata) {
dev_err(dev, "No platform data found\n");
return -EINVAL;
}
/*
* The gpio banks conceptually expose a segmented bitmap,
* and "ngpio" is one more than the largest zero-based
* bit index that's valid.
*/
ngpio = soc_info->gpio_num;
ngpio = pdata->ngpio;
if (ngpio == 0) {
pr_err("GPIO setup: how many GPIOs?\n");
dev_err(dev, "How many GPIOs?\n");
return -EINVAL;
}
if (WARN_ON(DAVINCI_N_GPIO < ngpio))
ngpio = DAVINCI_N_GPIO;
gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
if (WARN_ON(!gpio_base))
chips = devm_kzalloc(dev,
ngpio * sizeof(struct davinci_gpio_controller),
GFP_KERNEL);
if (!chips) {
dev_err(dev, "Memory allocation failed\n");
return -ENOMEM;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "Invalid memory resource\n");
return -EBUSY;
}
gpio_base = devm_ioremap_resource(dev, res);
if (IS_ERR(gpio_base))
return PTR_ERR(gpio_base);
for (i = 0, base = 0; base < ngpio; i++, base += 32) {
chips[i].chip.label = "DaVinci";
......@@ -183,13 +205,10 @@ static int __init davinci_gpio_setup(void)
gpiochip_add(&chips[i].chip);
}
soc_info->gpio_ctlrs = chips;
soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
davinci_gpio_irq_setup();
platform_set_drvdata(pdev, chips);
davinci_gpio_irq_setup(pdev);
return 0;
}
pure_initcall(davinci_gpio_setup);
/*--------------------------------------------------------------------------*/
/*
......@@ -302,13 +321,14 @@ static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
{
struct davinci_soc_info *soc_info = &davinci_soc_info;
struct davinci_gpio_controller *d = chip2controller(chip);
/* NOTE: we assume for now that only irqs in the first gpio_chip
/*
* NOTE: we assume for now that only irqs in the first gpio_chip
* can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
*/
if (offset < soc_info->gpio_unbanked)
return soc_info->gpio_irq + offset;
if (offset < d->irq_base)
return d->gpio_irq + offset;
else
return -ENODEV;
}
......@@ -317,12 +337,11 @@ static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger)
{
struct davinci_gpio_controller *d;
struct davinci_gpio_regs __iomem *g;
struct davinci_soc_info *soc_info = &davinci_soc_info;
u32 mask;
d = (struct davinci_gpio_controller *)data->handler_data;
g = (struct davinci_gpio_regs __iomem *)d->regs;
mask = __gpio_mask(data->irq - soc_info->gpio_irq);
mask = __gpio_mask(data->irq - d->gpio_irq);
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
return -EINVAL;
......@@ -343,24 +362,33 @@ static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger)
* (dm6446) can be set appropriately for GPIOV33 pins.
*/
static int __init davinci_gpio_irq_setup(void)
static int davinci_gpio_irq_setup(struct platform_device *pdev)
{
unsigned gpio, irq, bank;
struct clk *clk;
u32 binten = 0;
unsigned ngpio, bank_irq;
struct davinci_soc_info *soc_info = &davinci_soc_info;
struct davinci_gpio_regs __iomem *g;
struct device *dev = &pdev->dev;
struct resource *res;
struct davinci_gpio_controller *chips = platform_get_drvdata(pdev);
struct davinci_gpio_platform_data *pdata = dev->platform_data;
struct davinci_gpio_regs __iomem *g;
ngpio = soc_info->gpio_num;
ngpio = pdata->ngpio;
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_err(dev, "Invalid IRQ resource\n");
return -EBUSY;
}
bank_irq = soc_info->gpio_irq;
if (bank_irq == 0) {
printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
return -EINVAL;
bank_irq = res->start;
if (!bank_irq) {
dev_err(dev, "Invalid IRQ resource\n");
return -ENODEV;
}
clk = clk_get(NULL, "gpio");
clk = devm_clk_get(dev, "gpio");
if (IS_ERR(clk)) {
printk(KERN_ERR "Error %ld getting gpio clock?\n",
PTR_ERR(clk));
......@@ -368,16 +396,17 @@ static int __init davinci_gpio_irq_setup(void)
}
clk_prepare_enable(clk);
/* Arrange gpio_to_irq() support, handling either direct IRQs or
/*
* Arrange gpio_to_irq() support, handling either direct IRQs or
* banked IRQs. Having GPIOs in the first GPIO bank use direct
* IRQs, while the others use banked IRQs, would need some setup
* tweaks to recognize hardware which can do that.
*/
for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
chips[bank].chip.to_irq = gpio_to_irq_banked;
chips[bank].irq_base = soc_info->gpio_unbanked
chips[bank].irq_base = pdata->gpio_unbanked
? -EINVAL
: (soc_info->intc_irq_num + gpio);
: (pdata->intc_irq_num + gpio);
}
/*
......@@ -385,7 +414,7 @@ static int __init davinci_gpio_irq_setup(void)
* controller only handling trigger modes. We currently assume no
* IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
*/
if (soc_info->gpio_unbanked) {
if (pdata->gpio_unbanked) {
static struct irq_chip_type gpio_unbanked;
/* pass "bank 0" GPIO IRQs to AINTC */
......@@ -405,7 +434,7 @@ static int __init davinci_gpio_irq_setup(void)
__raw_writel(~0, &g->set_rising);
/* set the direct IRQs up to use that irqchip */
for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
for (gpio = 0; gpio < pdata->gpio_unbanked; gpio++, irq++) {
irq_set_chip(irq, &gpio_unbanked.chip);
irq_set_handler_data(irq, &chips[gpio / 32]);
irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
......@@ -450,12 +479,31 @@ static int __init davinci_gpio_irq_setup(void)
}
done:
/* BINTEN -- per-bank interrupt enable. genirq would also let these
/*
* BINTEN -- per-bank interrupt enable. genirq would also let these
* bits be set/cleared dynamically.
*/
__raw_writel(binten, gpio_base + 0x08);
__raw_writel(binten, gpio_base + BINTEN);
printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
return 0;
}
static struct platform_driver davinci_gpio_driver = {
.probe = davinci_gpio_probe,
.driver = {
.name = "davinci_gpio",
.owner = THIS_MODULE,
},
};
/**
* GPIO driver registration needs to be done before machine_init functions
* access GPIO. Hence davinci_gpio_drv_reg() is a postcore_initcall.
*/
static int __init davinci_gpio_drv_reg(void)
{
return platform_driver_register(&davinci_gpio_driver);
}
postcore_initcall(davinci_gpio_drv_reg);
drivers/gpio/gpio-tnetv107x.c
View file @ 53575aa9
......@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/platform_data/gpio-davinci.h>
#include <mach/common.h>
#include <mach/tnetv107x.h>
......
drivers/irqchip/irq-armada-370-xp.c
View file @ 53575aa9
......@@ -21,7 +21,10 @@
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
#include <linux/irqdomain.h>
#include <linux/slab.h>
#include <linux/msi.h>
#include <asm/mach/arch.h>
#include <asm/exception.h>
#include <asm/smp_plat.h>
......@@ -51,12 +54,22 @@
#define IPI_DOORBELL_START (0)
#define IPI_DOORBELL_END (8)
#define IPI_DOORBELL_MASK 0xFF
#define PCI_MSI_DOORBELL_START (16)
#define PCI_MSI_DOORBELL_NR (16)
#define PCI_MSI_DOORBELL_END (32)
#define PCI_MSI_DOORBELL_MASK 0xFFFF0000
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
static void __iomem *per_cpu_int_base;
static void __iomem *main_int_base;
static struct irq_domain *armada_370_xp_mpic_domain;
#ifdef CONFIG_PCI_MSI
static struct irq_domain *armada_370_xp_msi_domain;
static DECLARE_BITMAP(msi_used, PCI_MSI_DOORBELL_NR);
static DEFINE_MUTEX(msi_used_lock);
static phys_addr_t msi_doorbell_addr;
#endif
/*
* In SMP mode:
......@@ -87,6 +100,144 @@ static void armada_370_xp_irq_unmask(struct irq_data *d)
ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
}
#ifdef CONFIG_PCI_MSI
static int armada_370_xp_alloc_msi(void)
{
int hwirq;
mutex_lock(&msi_used_lock);
hwirq = find_first_zero_bit(&msi_used, PCI_MSI_DOORBELL_NR);
if (hwirq >= PCI_MSI_DOORBELL_NR)
hwirq = -ENOSPC;
else
set_bit(hwirq, msi_used);
mutex_unlock(&msi_used_lock);
return hwirq;
}
static void armada_370_xp_free_msi(int hwirq)
{
mutex_lock(&msi_used_lock);
if (!test_bit(hwirq, msi_used))
pr_err("trying to free unused MSI#%d\n", hwirq);
else
clear_bit(hwirq, msi_used);
mutex_unlock(&msi_used_lock);
}
static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
struct pci_dev *pdev,
struct msi_desc *desc)
{
struct msi_msg msg;
irq_hw_number_t hwirq;
int virq;
hwirq = armada_370_xp_alloc_msi();
if (hwirq < 0)
return hwirq;
virq = irq_create_mapping(armada_370_xp_msi_domain, hwirq);
if (!virq) {
armada_370_xp_free_msi(hwirq);
return -EINVAL;
}
irq_set_msi_desc(virq, desc);
msg.address_lo = msi_doorbell_addr;
msg.address_hi = 0;
msg.data = 0xf00 | (hwirq + 16);
write_msi_msg(virq, &msg);
return 0;
}
static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip,
unsigned int irq)
{
struct irq_data *d = irq_get_irq_data(irq);
irq_dispose_mapping(irq);
armada_370_xp_free_msi(d->hwirq);
}
static struct irq_chip armada_370_xp_msi_irq_chip = {
.name = "armada_370_xp_msi_irq",
.irq_enable = unmask_msi_irq,
.irq_disable = mask_msi_irq,
.irq_mask = mask_msi_irq,
.irq_unmask = unmask_msi_irq,
};
static int armada_370_xp_msi_map(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hw)
{
irq_set_chip_and_handler(virq, &armada_370_xp_msi_irq_chip,
handle_simple_irq);
set_irq_flags(virq, IRQF_VALID);
return 0;
}
static const struct irq_domain_ops armada_370_xp_msi_irq_ops = {
.map = armada_370_xp_msi_map,
};
static int armada_370_xp_msi_init(struct device_node *node,
phys_addr_t main_int_phys_base)
{
struct msi_chip *msi_chip;
u32 reg;
int ret;
msi_doorbell_addr = main_int_phys_base +
ARMADA_370_XP_SW_TRIG_INT_OFFS;
msi_chip = kzalloc(sizeof(*msi_chip), GFP_KERNEL);
if (!msi_chip)
return -ENOMEM;
msi_chip->setup_irq = armada_370_xp_setup_msi_irq;
msi_chip->teardown_irq = armada_370_xp_teardown_msi_irq;
msi_chip->of_node = node;
armada_370_xp_msi_domain =
irq_domain_add_linear(NULL, PCI_MSI_DOORBELL_NR,
&armada_370_xp_msi_irq_ops,
NULL);
if (!armada_370_xp_msi_domain) {
kfree(msi_chip);
return -ENOMEM;
}
ret = of_pci_msi_chip_add(msi_chip);
if (ret < 0) {
irq_domain_remove(armada_370_xp_msi_domain);
kfree(msi_chip);
return ret;
}
reg = readl(per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_MSK_OFFS)
| PCI_MSI_DOORBELL_MASK;
writel(reg, per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
/* Unmask IPI interrupt */
writel(1, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
return 0;
}
#else
static inline int armada_370_xp_msi_init(struct device_node *node,
phys_addr_t main_int_phys_base)
{
return 0;
}
#endif
#ifdef CONFIG_SMP
static int armada_xp_set_affinity(struct irq_data *d,
const struct cpumask *mask_val, bool force)
......@@ -214,12 +365,39 @@ armada_370_xp_handle_irq(struct pt_regs *regs)
if (irqnr > 1022)
break;
if (irqnr > 0) {
if (irqnr > 1) {
irqnr = irq_find_mapping(armada_370_xp_mpic_domain,
irqnr);
handle_IRQ(irqnr, regs);
continue;
}
#ifdef CONFIG_PCI_MSI
/* MSI handling */
if (irqnr == 1) {
u32 msimask, msinr;
msimask = readl_relaxed(per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
& PCI_MSI_DOORBELL_MASK;
writel(~PCI_MSI_DOORBELL_MASK, per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
for (msinr = PCI_MSI_DOORBELL_START;
msinr < PCI_MSI_DOORBELL_END; msinr++) {
int irq;
if (!(msimask & BIT(msinr)))
continue;
irq = irq_find_mapping(armada_370_xp_msi_domain,
msinr - 16);
handle_IRQ(irq, regs);
}
}
#endif
#ifdef CONFIG_SMP
/* IPI Handling */
if (irqnr == 0) {
......@@ -248,12 +426,25 @@ armada_370_xp_handle_irq(struct pt_regs *regs)
static int __init armada_370_xp_mpic_of_init(struct device_node *node,
struct device_node *parent)
{
struct resource main_int_res, per_cpu_int_res;
u32 control;
main_int_base = of_iomap(node, 0);
per_cpu_int_base = of_iomap(node, 1);
BUG_ON(of_address_to_resource(node, 0, &main_int_res));
BUG_ON(of_address_to_resource(node, 1, &per_cpu_int_res));
BUG_ON(!request_mem_region(main_int_res.start,
resource_size(&main_int_res),
node->full_name));
BUG_ON(!request_mem_region(per_cpu_int_res.start,
resource_size(&per_cpu_int_res),
node->full_name));
main_int_base = ioremap(main_int_res.start,
resource_size(&main_int_res));
BUG_ON(!main_int_base);
per_cpu_int_base = ioremap(per_cpu_int_res.start,
resource_size(&per_cpu_int_res));
BUG_ON(!per_cpu_int_base);
control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL);
......@@ -262,8 +453,7 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node,
irq_domain_add_linear(node, (control >> 2) & 0x3ff,
&armada_370_xp_mpic_irq_ops, NULL);
if (!armada_370_xp_mpic_domain)
panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n");
BUG_ON(!armada_370_xp_mpic_domain);
irq_set_default_host(armada_370_xp_mpic_domain);
......@@ -280,6 +470,8 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node,
#endif
armada_370_xp_msi_init(node, main_int_res.start);
set_handle_irq(armada_370_xp_handle_irq);
return 0;
......
drivers/pci/host/Kconfig
View file @ 53575aa9
......@@ -3,7 +3,7 @@ menu "PCI host controller drivers"
config PCI_MVEBU
bool "Marvell EBU PCIe controller"
depends on ARCH_MVEBU || ARCH_KIRKWOOD
depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD
depends on OF
config PCIE_DW
......
drivers/pci/host/pci-mvebu.c
View file @ 53575aa9
......@@ -9,13 +9,17 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/mbus.h>
#include <linux/msi.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
#include <linux/of_pci.h>
#include <linux/of_platform.h>
/*
......@@ -103,6 +107,7 @@ struct mvebu_pcie_port;
struct mvebu_pcie {
struct platform_device *pdev;
struct mvebu_pcie_port *ports;
struct msi_chip *msi;
struct resource io;
struct resource realio;
struct resource mem;
......@@ -115,7 +120,6 @@ struct mvebu_pcie_port {
char *name;
void __iomem *base;
spinlock_t conf_lock;
int haslink;
u32 port;
u32 lane;
int devfn;
......@@ -124,6 +128,9 @@ struct mvebu_pcie_port {
unsigned int io_target;
unsigned int io_attr;
struct clk *clk;
int reset_gpio;
int reset_active_low;
char *reset_name;
struct mvebu_sw_pci_bridge bridge;
struct device_node *dn;
struct mvebu_pcie *pcie;
......@@ -133,29 +140,39 @@ struct mvebu_pcie_port {
size_t iowin_size;
};
static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
{
writel(val, port->base + reg);
}
static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg)
{
return readl(port->base + reg);
}
static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
{
return !(readl(port->base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
}
static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
{
u32 stat;
stat = readl(port->base + PCIE_STAT_OFF);
stat = mvebu_readl(port, PCIE_STAT_OFF);
stat &= ~PCIE_STAT_BUS;
stat |= nr << 8;
writel(stat, port->base + PCIE_STAT_OFF);
mvebu_writel(port, stat, PCIE_STAT_OFF);
}
static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
{
u32 stat;
stat = readl(port->base + PCIE_STAT_OFF);
stat = mvebu_readl(port, PCIE_STAT_OFF);
stat &= ~PCIE_STAT_DEV;
stat |= nr << 16;
writel(stat, port->base + PCIE_STAT_OFF);
mvebu_writel(port, stat, PCIE_STAT_OFF);
}
/*
......@@ -163,7 +180,7 @@ static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
* BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
* WIN[0-3] -> DRAM bank[0-3]
*/
static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
{
const struct mbus_dram_target_info *dram;
u32 size;
......@@ -173,33 +190,34 @@ static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
/* First, disable and clear BARs and windows. */
for (i = 1; i < 3; i++) {
writel(0, port->base + PCIE_BAR_CTRL_OFF(i));
writel(0, port->base + PCIE_BAR_LO_OFF(i));
writel(0, port->base + PCIE_BAR_HI_OFF(i));
mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i));
mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i));
mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i));
}
for (i = 0; i < 5; i++) {
writel(0, port->base + PCIE_WIN04_CTRL_OFF(i));
writel(0, port->base + PCIE_WIN04_BASE_OFF(i));
writel(0, port->base + PCIE_WIN04_REMAP_OFF(i));
mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i));
mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i));
mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
}
writel(0, port->base + PCIE_WIN5_CTRL_OFF);
writel(0, port->base + PCIE_WIN5_BASE_OFF);
writel(0, port->base + PCIE_WIN5_REMAP_OFF);
mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF);
mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF);
mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF);
/* Setup windows for DDR banks. Count total DDR size on the fly. */
size = 0;
for (i = 0; i < dram->num_cs; i++) {
const struct mbus_dram_window *cs = dram->cs + i;
writel(cs->base & 0xffff0000,
port->base + PCIE_WIN04_BASE_OFF(i));
writel(0, port->base + PCIE_WIN04_REMAP_OFF(i));
writel(((cs->size - 1) & 0xffff0000) |
(cs->mbus_attr << 8) |
(dram->mbus_dram_target_id << 4) | 1,
port->base + PCIE_WIN04_CTRL_OFF(i));
mvebu_writel(port, cs->base & 0xffff0000,
PCIE_WIN04_BASE_OFF(i));
mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
mvebu_writel(port,
((cs->size - 1) & 0xffff0000) |
(cs->mbus_attr << 8) |
(dram->mbus_dram_target_id << 4) | 1,
PCIE_WIN04_CTRL_OFF(i));
size += cs->size;
}
......@@ -209,41 +227,40 @@ static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
size = 1 << fls(size);
/* Setup BAR[1] to all DRAM banks. */
writel(dram->cs[0].base, port->base + PCIE_BAR_LO_OFF(1));
writel(0, port->base + PCIE_BAR_HI_OFF(1));
writel(((size - 1) & 0xffff0000) | 1,
port->base + PCIE_BAR_CTRL_OFF(1));
mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1));
mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1));
mvebu_writel(port, ((size - 1) & 0xffff0000) | 1,
PCIE_BAR_CTRL_OFF(1));
}
static void __init mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
{
u16 cmd;
u32 mask;
u32 cmd, mask;
/* Point PCIe unit MBUS decode windows to DRAM space. */
mvebu_pcie_setup_wins(port);
/* Master + slave enable. */
cmd = readw(port->base + PCIE_CMD_OFF);
cmd = mvebu_readl(port, PCIE_CMD_OFF);
cmd |= PCI_COMMAND_IO;
cmd |= PCI_COMMAND_MEMORY;
cmd |= PCI_COMMAND_MASTER;
writew(cmd, port->base + PCIE_CMD_OFF);
mvebu_writel(port, cmd, PCIE_CMD_OFF);
/* Enable interrupt lines A-D. */
mask = readl(port->base + PCIE_MASK_OFF);
mask = mvebu_readl(port, PCIE_MASK_OFF);
mask |= PCIE_MASK_ENABLE_INTS;
writel(mask, port->base + PCIE_MASK_OFF);
mvebu_writel(port, mask, PCIE_MASK_OFF);
}
static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
struct pci_bus *bus,
u32 devfn, int where, int size, u32 *val)
{
writel(PCIE_CONF_ADDR(bus->number, devfn, where),
port->base + PCIE_CONF_ADDR_OFF);
mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
PCIE_CONF_ADDR_OFF);
*val = readl(port->base + PCIE_CONF_DATA_OFF);
*val = mvebu_readl(port, PCIE_CONF_DATA_OFF);
if (size == 1)
*val = (*val >> (8 * (where & 3))) & 0xff;
......@@ -257,21 +274,24 @@ static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
struct pci_bus *bus,
u32 devfn, int where, int size, u32 val)
{
int ret = PCIBIOS_SUCCESSFUL;
u32 _val, shift = 8 * (where & 3);
writel(PCIE_CONF_ADDR(bus->number, devfn, where),
port->base + PCIE_CONF_ADDR_OFF);
mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
PCIE_CONF_ADDR_OFF);
_val = mvebu_readl(port, PCIE_CONF_DATA_OFF);
if (size == 4)
writel(val, port->base + PCIE_CONF_DATA_OFF);
_val = val;
else if (size == 2)
writew(val, port->base + PCIE_CONF_DATA_OFF + (where & 3));
_val = (_val & ~(0xffff << shift)) | ((val & 0xffff) << shift);
else if (size == 1)
writeb(val, port->base + PCIE_CONF_DATA_OFF + (where & 3));
_val = (_val & ~(0xff << shift)) | ((val & 0xff) << shift);
else
ret = PCIBIOS_BAD_REGISTER_NUMBER;
return PCIBIOS_BAD_REGISTER_NUMBER;
return ret;
mvebu_writel(port, _val, PCIE_CONF_DATA_OFF);
return PCIBIOS_SUCCESSFUL;
}
static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
......@@ -552,7 +572,7 @@ static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
if (bus->number == 0)
return mvebu_sw_pci_bridge_write(port, where, size, val);
if (!port->haslink)
if (!mvebu_pcie_link_up(port))
return PCIBIOS_DEVICE_NOT_FOUND;
/*
......@@ -594,7 +614,7 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
if (bus->number == 0)
return mvebu_sw_pci_bridge_read(port, where, size, val);
if (!port->haslink) {
if (!mvebu_pcie_link_up(port)) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
......@@ -626,7 +646,7 @@ static struct pci_ops mvebu_pcie_ops = {
.write = mvebu_pcie_wr_conf,
};
static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct mvebu_pcie *pcie = sys_to_pcie(sys);
int i;
......@@ -645,7 +665,7 @@ static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
return 1;
}
static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
static int mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct of_irq oirq;
int ret;
......@@ -673,11 +693,17 @@ static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys)
return bus;
}
resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
const struct resource *res,
resource_size_t start,
resource_size_t size,
resource_size_t align)
static void mvebu_pcie_add_bus(struct pci_bus *bus)
{
struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
bus->msi = pcie->msi;
}
static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
const struct resource *res,
resource_size_t start,
resource_size_t size,
resource_size_t align)
{
if (dev->bus->number != 0)
return start;
......@@ -696,7 +722,7 @@ resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
return start;
}
static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie)
static void mvebu_pcie_enable(struct mvebu_pcie *pcie)
{
struct hw_pci hw;
......@@ -709,6 +735,7 @@ static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie)
hw.map_irq = mvebu_pcie_map_irq;
hw.ops = &mvebu_pcie_ops;
hw.align_resource = mvebu_pcie_align_resource;
hw.add_bus = mvebu_pcie_add_bus;
pci_common_init(&hw);
}
......@@ -718,10 +745,8 @@ static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie)
* <...> property for one that matches the given port/lane. Once
* found, maps it.
*/
static void __iomem * __init
mvebu_pcie_map_registers(struct platform_device *pdev,
struct device_node *np,
struct mvebu_pcie_port *port)
static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev,
struct device_node *np, struct mvebu_pcie_port *port)
{
struct resource regs;
int ret = 0;
......@@ -777,7 +802,22 @@ static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
return -ENOENT;
}
static int __init mvebu_pcie_probe(struct platform_device *pdev)
static void mvebu_pcie_msi_enable(struct mvebu_pcie *pcie)
{
struct device_node *msi_node;
msi_node = of_parse_phandle(pcie->pdev->dev.of_node,
"msi-parent", 0);
if (!msi_node)
return;
pcie->msi = of_pci_find_msi_chip_by_node(msi_node);
if (pcie->msi)
pcie->msi->dev = &pcie->pdev->dev;
}
static int mvebu_pcie_probe(struct platform_device *pdev)
{
struct mvebu_pcie *pcie;
struct device_node *np = pdev->dev.of_node;
......@@ -790,6 +830,7 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
return -ENOMEM;
pcie->pdev = pdev;
platform_set_drvdata(pdev, pcie);
/* Get the PCIe memory and I/O aperture */
mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
......@@ -818,13 +859,14 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
return ret;
}
i = 0;
for_each_child_of_node(pdev->dev.of_node, child) {
if (!of_device_is_available(child))
continue;
pcie->nports++;
i++;
}
pcie->ports = devm_kzalloc(&pdev->dev, pcie->nports *
pcie->ports = devm_kzalloc(&pdev->dev, i *
sizeof(struct mvebu_pcie_port),
GFP_KERNEL);
if (!pcie->ports)
......@@ -833,6 +875,7 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
i = 0;
for_each_child_of_node(pdev->dev.of_node, child) {
struct mvebu_pcie_port *port = &pcie->ports[i];
enum of_gpio_flags flags;
if (!of_device_is_available(child))
continue;
......@@ -873,45 +916,68 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
continue;
}
port->reset_gpio = of_get_named_gpio_flags(child,
"reset-gpios", 0, &flags);
if (gpio_is_valid(port->reset_gpio)) {
u32 reset_udelay = 20000;
port->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
port->reset_name = kasprintf(GFP_KERNEL,
"pcie%d.%d-reset", port->port, port->lane);
of_property_read_u32(child, "reset-delay-us",
&reset_udelay);
ret = devm_gpio_request_one(&pdev->dev,
port->reset_gpio, GPIOF_DIR_OUT, port->reset_name);
if (ret) {
if (ret == -EPROBE_DEFER)
return ret;
continue;
}
gpio_set_value(port->reset_gpio,
(port->reset_active_low) ? 1 : 0);
msleep(reset_udelay/1000);
}
port->clk = of_clk_get_by_name(child, NULL);
if (IS_ERR(port->clk)) {
dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n",
port->port, port->lane);
continue;
}
ret = clk_prepare_enable(port->clk);
if (ret)
continue;
port->base = mvebu_pcie_map_registers(pdev, child, port);
if (IS_ERR(port->base)) {
dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",
port->port, port->lane);
port->base = NULL;
clk_disable_unprepare(port->clk);
continue;
}
mvebu_pcie_set_local_dev_nr(port, 1);
if (mvebu_pcie_link_up(port)) {
port->haslink = 1;
dev_info(&pdev->dev, "PCIe%d.%d: link up\n",
port->port, port->lane);
} else {
port->haslink = 0;
dev_info(&pdev->dev, "PCIe%d.%d: link down\n",
port->port, port->lane);
}
port->clk = of_clk_get_by_name(child, NULL);
if (IS_ERR(port->clk)) {
dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n",
port->port, port->lane);
iounmap(port->base);
port->haslink = 0;
continue;
}
port->dn = child;
clk_prepare_enable(port->clk);
spin_lock_init(&port->conf_lock);
mvebu_sw_pci_bridge_init(port);
i++;
}
pcie->nports = i;
mvebu_pcie_msi_enable(pcie);
mvebu_pcie_enable(pcie);
return 0;
......@@ -920,6 +986,7 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
static const struct of_device_id mvebu_pcie_of_match_table[] = {
{ .compatible = "marvell,armada-xp-pcie", },
{ .compatible = "marvell,armada-370-pcie", },
{ .compatible = "marvell,dove-pcie", },
{ .compatible = "marvell,kirkwood-pcie", },
{},
};
......@@ -931,16 +998,12 @@ static struct platform_driver mvebu_pcie_driver = {
.name = "mvebu-pcie",
.of_match_table =
of_match_ptr(mvebu_pcie_of_match_table),
/* driver unloading/unbinding currently not supported */
.suppress_bind_attrs = true,
},
.probe = mvebu_pcie_probe,
};
static int __init mvebu_pcie_init(void)
{
return platform_driver_probe(&mvebu_pcie_driver,
mvebu_pcie_probe);
}
subsys_initcall(mvebu_pcie_init);
module_platform_driver(mvebu_pcie_driver);
MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
MODULE_DESCRIPTION("Marvell EBU PCIe driver");
......
include/linux/platform_data/dma-s3c24xx.h 0 → 100644
View file @ 53575aa9
/*
* S3C24XX DMA handling
*
* Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
/* Helper to encode the source selection constraints for early s3c socs. */
#define S3C24XX_DMA_CHANREQ(src, chan) ((BIT(3) | src) << chan * 4)
enum s3c24xx_dma_bus {
S3C24XX_DMA_APB,
S3C24XX_DMA_AHB,
};
/**
* @bus: on which bus does the peripheral reside - AHB or APB.
* @handshake: is a handshake with the peripheral necessary
* @chansel: channel selection information, depending on variant; reqsel for
* s3c2443 and later and channel-selection map for earlier SoCs
* see CHANSEL doc in s3c2443-dma.c
*/
struct s3c24xx_dma_channel {
enum s3c24xx_dma_bus bus;
bool handshake;
u16 chansel;
};
/**
* struct s3c24xx_dma_platdata - platform specific settings
* @num_phy_channels: number of physical channels
* @channels: array of virtual channel descriptions
* @num_channels: number of virtual channels
*/
struct s3c24xx_dma_platdata {
int num_phy_channels;
struct s3c24xx_dma_channel *channels;
int num_channels;
};
struct dma_chan;
bool s3c24xx_dma_filter(struct dma_chan *chan, void *param);
include/linux/platform_data/gpio-davinci.h 0 → 100644
View file @ 53575aa9
/*
* DaVinci GPIO Platform Related Defines
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __DAVINCI_GPIO_PLATFORM_H
#define __DAVINCI_GPIO_PLATFORM_H
#include <linux/io.h>
#include <linux/spinlock.h>
#include <asm-generic/gpio.h>
enum davinci_gpio_type {
GPIO_TYPE_TNETV107X = 0,
};
struct davinci_gpio_platform_data {
u32 ngpio;
u32 gpio_unbanked;
u32 intc_irq_num;
};
struct davinci_gpio_controller {
struct gpio_chip chip;
int irq_base;
/* Serialize access to GPIO registers */
spinlock_t lock;
void __iomem *regs;
void __iomem *set_data;
void __iomem *clr_data;
void __iomem *in_data;
int gpio_unbanked;
unsigned gpio_irq;
};
/*
* basic gpio routines
*/
#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
/* Convert GPIO signal to GPIO pin number */
#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
static inline u32 __gpio_mask(unsigned gpio)
{
return 1 << (gpio % 32);
}
#endif
sound/soc/samsung/Kconfig
View file @ 53575aa9
......@@ -2,7 +2,7 @@ config SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
depends on PLAT_SAMSUNG
select S3C64XX_DMA if ARCH_S3C64XX
select S3C2410_DMA if ARCH_S3C24XX
select S3C24XX_DMA if ARCH_S3C24XX
help
Say Y or M if you want to add support for codecs attached to
the Samsung SoCs' Audio interfaces. You will also need to
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7