Commit 53de7c26 authored by Thierry Reding's avatar Thierry Reding

Merge branch 'for-4.8/regulator' into for-next

parents 070d9a93 58fd822b
......@@ -34,20 +34,44 @@ Only required for Voltage Table Mode:
First cell is voltage in microvolts (uV)
Second cell is duty-cycle in percent (%)
Optional properties for Continuous mode:
- pwm-dutycycle-unit: Integer value encoding the duty cycle unit. If not
defined, <100> is assumed, meaning that
pwm-dutycycle-range contains values expressed in
percent.
- pwm-dutycycle-range: Should contain 2 entries. The first entry is encoding
the dutycycle for regulator-min-microvolt and the
second one the dutycycle for regulator-max-microvolt.
Duty cycle values are expressed in pwm-dutycycle-unit.
If not defined, <0 100> is assumed.
NB: To be clear, if voltage-table is provided, then the device will be used
in Voltage Table Mode. If no voltage-table is provided, then the device will
be used in Continuous Voltage Mode.
Optional properties:
--------------------
- enable-gpios: GPIO to use to enable/disable the regulator
Any property defined as part of the core regulator binding can also be used.
(See: ../regulator/regulator.txt)
Continuous Voltage Example:
Continuous Voltage With Enable GPIO Example:
pwm_regulator {
compatible = "pwm-regulator;
pwms = <&pwm1 0 8448 0>;
enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
regulator-min-microvolt = <1016000>;
regulator-max-microvolt = <1114000>;
regulator-name = "vdd_logic";
/* unit == per-mille */
pwm-dutycycle-unit = <1000>;
/*
* Inverted PWM logic, and the duty cycle range is limited
* to 30%-70%.
*/
pwm-dutycycle-range <700 300>; /* */
};
Voltage Table Example:
......
......@@ -20,6 +20,13 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pwm.h>
#include <linux/gpio/consumer.h>
struct pwm_continuous_reg_data {
unsigned int min_uV_dutycycle;
unsigned int max_uV_dutycycle;
unsigned int dutycycle_unit;
};
struct pwm_regulator_data {
/* Shared */
......@@ -28,6 +35,9 @@ struct pwm_regulator_data {
/* Voltage table */
struct pwm_voltages *duty_cycle_table;
/* Continuous mode info */
struct pwm_continuous_reg_data continuous;
/* regulator descriptor */
struct regulator_desc desc;
......@@ -36,8 +46,8 @@ struct pwm_regulator_data {
int state;
/* Continuous voltage */
int volt_uV;
/* Enable GPIO */
struct gpio_desc *enb_gpio;
};
struct pwm_voltages {
......@@ -48,10 +58,31 @@ struct pwm_voltages {
/**
* Voltage table call-backs
*/
static void pwm_regulator_init_state(struct regulator_dev *rdev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
struct pwm_state pwm_state;
unsigned int dutycycle;
int i;
pwm_get_state(drvdata->pwm, &pwm_state);
dutycycle = pwm_get_relative_duty_cycle(&pwm_state, 100);
for (i = 0; i < rdev->desc->n_voltages; i++) {
if (dutycycle == drvdata->duty_cycle_table[i].dutycycle) {
drvdata->state = i;
return;
}
}
}
static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
if (drvdata->state < 0)
pwm_regulator_init_state(rdev);
return drvdata->state;
}
......@@ -59,16 +90,14 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
struct pwm_args pargs;
int dutycycle;
struct pwm_state pstate;
int ret;
pwm_get_args(drvdata->pwm, &pargs);
pwm_init_state(drvdata->pwm, &pstate);
pwm_set_relative_duty_cycle(&pstate,
drvdata->duty_cycle_table[selector].dutycycle, 100);
dutycycle = (pargs.period *
drvdata->duty_cycle_table[selector].dutycycle) / 100;
ret = pwm_config(drvdata->pwm, dutycycle, pargs.period);
ret = pwm_apply_state(drvdata->pwm, &pstate);
if (ret) {
dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
return ret;
......@@ -94,6 +123,9 @@ static int pwm_regulator_enable(struct regulator_dev *dev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
if (drvdata->enb_gpio)
gpiod_set_value_cansleep(drvdata->enb_gpio, 1);
return pwm_enable(drvdata->pwm);
}
......@@ -103,6 +135,9 @@ static int pwm_regulator_disable(struct regulator_dev *dev)
pwm_disable(drvdata->pwm);
if (drvdata->enb_gpio)
gpiod_set_value_cansleep(drvdata->enb_gpio, 0);
return 0;
}
......@@ -110,64 +145,100 @@ static int pwm_regulator_is_enabled(struct regulator_dev *dev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
if (drvdata->enb_gpio && !gpiod_get_value_cansleep(drvdata->enb_gpio))
return false;
return pwm_is_enabled(drvdata->pwm);
}
static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
int min_uV = rdev->constraints->min_uV;
int max_uV = rdev->constraints->max_uV;
int diff_uV = max_uV - min_uV;
struct pwm_state pstate;
unsigned int diff_duty;
unsigned int voltage;
return drvdata->volt_uV;
pwm_get_state(drvdata->pwm, &pstate);
voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit);
/*
* The dutycycle for min_uV might be greater than the one for max_uV.
* This is happening when the user needs an inversed polarity, but the
* PWM device does not support inversing it in hardware.
*/
if (max_uV_duty < min_uV_duty) {
voltage = min_uV_duty - voltage;
diff_duty = min_uV_duty - max_uV_duty;
} else {
voltage = voltage - min_uV_duty;
diff_duty = max_uV_duty - min_uV_duty;
}
voltage = DIV_ROUND_CLOSEST_ULL((u64)voltage * diff_uV, diff_duty);
return voltage + min_uV;
}
static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV,
unsigned *selector)
int req_min_uV, int req_max_uV,
unsigned int *selector)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
unsigned int ramp_delay = rdev->constraints->ramp_delay;
struct pwm_args pargs;
unsigned int req_diff = min_uV - rdev->constraints->min_uV;
unsigned int diff;
unsigned int duty_pulse;
u64 req_period;
u32 rem;
int min_uV = rdev->constraints->min_uV;
int max_uV = rdev->constraints->max_uV;
int diff_uV = max_uV - min_uV;
struct pwm_state pstate;
int old_uV = pwm_regulator_get_voltage(rdev);
unsigned int diff_duty;
unsigned int dutycycle;
int ret;
pwm_get_args(drvdata->pwm, &pargs);
diff = rdev->constraints->max_uV - rdev->constraints->min_uV;
pwm_init_state(drvdata->pwm, &pstate);
/* First try to find out if we get the iduty cycle time which is
* factor of PWM period time. If (request_diff_to_min * pwm_period)
* is perfect divided by voltage_range_diff then it is possible to
* get duty cycle time which is factor of PWM period. This will help
* to get output voltage nearer to requested value as there is no
* calculation loss.
/*
* The dutycycle for min_uV might be greater than the one for max_uV.
* This is happening when the user needs an inversed polarity, but the
* PWM device does not support inversing it in hardware.
*/
req_period = req_diff * pargs.period;
div_u64_rem(req_period, diff, &rem);
if (!rem) {
do_div(req_period, diff);
duty_pulse = (unsigned int)req_period;
} else {
duty_pulse = (pargs.period / 100) * ((req_diff * 100) / diff);
}
if (max_uV_duty < min_uV_duty)
diff_duty = min_uV_duty - max_uV_duty;
else
diff_duty = max_uV_duty - min_uV_duty;
dutycycle = DIV_ROUND_CLOSEST_ULL((u64)(req_min_uV - min_uV) *
diff_duty,
diff_uV);
if (max_uV_duty < min_uV_duty)
dutycycle = min_uV_duty - dutycycle;
else
dutycycle = min_uV_duty + dutycycle;
ret = pwm_config(drvdata->pwm, duty_pulse, pargs.period);
pwm_set_relative_duty_cycle(&pstate, dutycycle, duty_unit);
ret = pwm_apply_state(drvdata->pwm, &pstate);
if (ret) {
dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
return ret;
}
ret = pwm_enable(drvdata->pwm);
if (ret) {
dev_err(&rdev->dev, "Failed to enable PWM: %d\n", ret);
return ret;
}
drvdata->volt_uV = min_uV;
if ((ramp_delay == 0) || !pwm_regulator_is_enabled(rdev))
return 0;
/* Delay required by PWM regulator to settle to the new voltage */
usleep_range(ramp_delay, ramp_delay + 1000);
/* Ramp delay is in uV/uS. Adjust to uS and delay */
ramp_delay = DIV_ROUND_UP(abs(req_min_uV - old_uV), ramp_delay);
usleep_range(ramp_delay, ramp_delay + DIV_ROUND_UP(ramp_delay, 10));
return 0;
}
......@@ -226,6 +297,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
return ret;
}
drvdata->state = -EINVAL;
drvdata->duty_cycle_table = duty_cycle_table;
memcpy(&drvdata->ops, &pwm_regulator_voltage_table_ops,
sizeof(drvdata->ops));
......@@ -238,11 +310,28 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
static int pwm_regulator_init_continuous(struct platform_device *pdev,
struct pwm_regulator_data *drvdata)
{
u32 dutycycle_range[2] = { 0, 100 };
u32 dutycycle_unit = 100;
memcpy(&drvdata->ops, &pwm_regulator_voltage_continuous_ops,
sizeof(drvdata->ops));
drvdata->desc.ops = &drvdata->ops;
drvdata->desc.continuous_voltage_range = true;
of_property_read_u32_array(pdev->dev.of_node,
"pwm-dutycycle-range",
dutycycle_range, 2);
of_property_read_u32(pdev->dev.of_node, "pwm-dutycycle-unit",
&dutycycle_unit);
if (dutycycle_range[0] > dutycycle_unit ||
dutycycle_range[1] > dutycycle_unit)
return -EINVAL;
drvdata->continuous.dutycycle_unit = dutycycle_unit;
drvdata->continuous.min_uV_dutycycle = dutycycle_range[0];
drvdata->continuous.max_uV_dutycycle = dutycycle_range[1];
return 0;
}
......@@ -253,6 +342,7 @@ static int pwm_regulator_probe(struct platform_device *pdev)
struct regulator_dev *regulator;
struct regulator_config config = { };
struct device_node *np = pdev->dev.of_node;
enum gpiod_flags gpio_flags;
int ret;
if (!np) {
......@@ -290,11 +380,21 @@ static int pwm_regulator_probe(struct platform_device *pdev)
return ret;
}
/*
* FIXME: pwm_apply_args() should be removed when switching to the
* atomic PWM API.
*/
pwm_apply_args(drvdata->pwm);
if (init_data->constraints.boot_on || init_data->constraints.always_on)
gpio_flags = GPIOD_OUT_HIGH;
else
gpio_flags = GPIOD_OUT_LOW;
drvdata->enb_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
gpio_flags);
if (IS_ERR(drvdata->enb_gpio)) {
ret = PTR_ERR(drvdata->enb_gpio);
dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n", ret);
return ret;
}
ret = pwm_adjust_config(drvdata->pwm);
if (ret)
return ret;
regulator = devm_regulator_register(&pdev->dev,
&drvdata->desc, &config);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment