Merge http://linux.bkbits.net/linux-2.5

into hostme.bitkeeper.com:/repos/l/linux-watchdog/linux-2.5-watchdog

arch/x86_64/defconfig

@@ -14,6 +14,7 @@ CONFIG_GENERIC_ISA_DMA=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
+# CONFIG_BROKEN is not set
 
 #
 # General setup
@@ -23,10 +24,12 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_IKCONFIG is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 
@@ -72,10 +75,10 @@ CONFIG_PM=y
 CONFIG_SOFTWARE_SUSPEND=y
 
 #
-# ACPI Support
+# ACPI (Advanced Configuration and Power Interface) Support
 #
+# CONFIG_ACPI_HT is not set
 CONFIG_ACPI=y
-# CONFIG_ACPI_HT_ONLY is not set
 CONFIG_ACPI_BOOT=y
 CONFIG_ACPI_SLEEP=y
 CONFIG_ACPI_SLEEP_PROC_FS=y
@@ -117,7 +120,6 @@ CONFIG_UID16=y
 #
 # Generic Driver Options
 #
-# CONFIG_FW_LOADER is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -159,6 +161,7 @@ CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_IDEDISK_STROKE is not set
 CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
@@ -318,7 +321,6 @@ CONFIG_IP_MULTICAST=y
 # CONFIG_DECNET is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_NETFILTER is not set
-# CONFIG_XFRM_USER is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -405,6 +407,7 @@ CONFIG_E1000=m
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 CONFIG_TIGON3=y
 
@@ -595,10 +598,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_JFS_FS=y
-CONFIG_JFS_POSIX_ACL=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
+# CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -674,49 +674,6 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
 
 #
 # Graphics support

arch/x86_64/ia32/sys_ia32.c

@@ -1170,8 +1170,6 @@ sys32_rt_sigqueueinfo(int pid, int sig, siginfo_t32 *uinfo)
 	return ret;
 }
 
-extern void check_pending(int signum);
-
 asmlinkage long sys_utimes(char *, struct timeval *);
 
 asmlinkage long

arch/x86_64/kernel/apic.c

@@ -299,7 +299,7 @@ void __init setup_local_APIC (void)
 	 * This is meaningless in clustered apic mode, so we skip it.
 	 */
 	if (!clustered_apic_mode &&
-		!cpu_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map))
+		!physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map))
 		BUG();
 
 	/*
@@ -993,7 +993,7 @@ int __init APIC_init_uniprocessor (void)
 
 	connect_bsp_APIC();
 
-	phys_cpu_present_map = cpumask_of_cpu(0);
+	phys_cpu_present_map = physid_mask_of_physid(0);
 	apic_write_around(APIC_ID, boot_cpu_id);
 
 	setup_local_APIC();

arch/x86_64/kernel/io_apic.c

@@ -1014,7 +1014,7 @@ void disable_IO_APIC(void)
 static void __init setup_ioapic_ids_from_mpc (void)
 {
 	union IO_APIC_reg_00 reg_00;
-	cpumask_t phys_id_present_map = phys_cpu_present_map;
+	physid_mask_t phys_id_present_map = phys_cpu_present_map;
 	int apic;
 	int i;
 	unsigned char old_id;
@@ -1047,22 +1047,22 @@ static void __init setup_ioapic_ids_from_mpc (void)
 		 * system must have a unique ID or we get lots of nice
 		 * 'stuck on smp_invalidate_needed IPI wait' messages.
 	 	 */
-		if (cpu_isset(mp_ioapics[apic].mpc_apicid, phys_id_present_map)) {
+		if (physid_isset(mp_ioapics[apic].mpc_apicid, phys_id_present_map)) {
 			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
 				apic, mp_ioapics[apic].mpc_apicid);
 			for (i = 0; i < 0xf; i++)
-				if (!cpu_isset(i, phys_id_present_map))
+				if (!physid_isset(i, phys_id_present_map))
 					break;
 			if (i >= 0xf)
 				panic("Max APIC ID exceeded!\n");
 			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
 				i);
-			cpu_set(i, phys_id_present_map);
+			physid_set(i, phys_id_present_map);
 			mp_ioapics[apic].mpc_apicid = i;
 		} else {
 			printk(KERN_INFO 
 			       "Using IO-APIC %d\n", mp_ioapics[apic].mpc_apicid);
-			cpu_set(mp_ioapics[apic].mpc_apicid, phys_id_present_map);
+			physid_set(mp_ioapics[apic].mpc_apicid, phys_id_present_map);
 		}
 
 
@@ -1642,7 +1642,7 @@ void __init mp_config_ioapic_for_sci(int irq)
 int __init io_apic_get_unique_id (int ioapic, int apic_id)
 {
 	union IO_APIC_reg_00 reg_00;
-	static cpumask_t apic_id_map;
+	static physid_mask_t apic_id_map;
 	unsigned long flags;
 	int i = 0;
 
@@ -1655,7 +1655,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 	 *      advantage of new APIC bus architecture.
 	 */
 
-	if (!cpus_empty(apic_id_map))
+	if (!physids_empty(apic_id_map))
 		apic_id_map = phys_cpu_present_map;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
@@ -1672,10 +1672,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 	 * Every APIC in a system must have a unique ID or we get lots of nice 
 	 * 'stuck on smp_invalidate_needed IPI wait' messages.
 	 */
-	if (cpu_isset(apic_id, apic_id_map)) {
+	if (physid_isset(apic_id, apic_id_map)) {
 
 		for (i = 0; i < IO_APIC_MAX_ID; i++) {
-			if (!cpu_isset(i, apic_id_map))
+			if (!physid_isset(i, apic_id_map))
 				break;
 		}
 
@@ -1688,7 +1688,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 		apic_id = i;
 	} 
 
-	cpu_set(apic_id, apic_id_map);
+	physid_set(apic_id, apic_id_map);
 
 	if (reg_00.bits.ID != apic_id) {
 		reg_00.bits.ID = apic_id;

arch/x86_64/kernel/ioport.c

@@ -10,12 +10,11 @@
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/ioport.h>
-#include <linux/mm.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/slab.h>
-#include <asm/io.h>
+#include <linux/thread_info.h>
 
 /* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */
 static void set_bitmap(unsigned long *bitmap, unsigned int base, unsigned int extent, int new_value)
@@ -118,12 +117,7 @@ asmlinkage long sys_iopl(unsigned int level, struct pt_regs regs)
 			return -EPERM;
 	}
 	regs.eflags = (regs.eflags &~ 0x3000UL) | (level << 12);
+	/* Make sure we return the long way (not sysenter) */
+	set_thread_flag(TIF_IRET);
 	return 0;
 }
-
-void eat_key(void)
-{
-	if (inb(0x60) & 1) 
-		inb(0x64);
-}
-

arch/x86_64/kernel/mpparse.c

@@ -67,7 +67,7 @@ unsigned int boot_cpu_id = -1U;
 static unsigned int num_processors = 0;
 
 /* Bitmask of physically existing CPUs */
-cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
+physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
 
 /* ACPI MADT entry parsing functions */
 #ifdef CONFIG_ACPI_BOOT
@@ -126,7 +126,7 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 	}
 	ver = m->mpc_apicver;
 
-	cpu_set(m->mpc_apicid, phys_cpu_present_map);
+	physid_set(m->mpc_apicid, phys_cpu_present_map);
 	/*
 	 * Validate version
 	 */

arch/x86_64/kernel/setup.c

@@ -243,6 +243,8 @@ static void __init contig_initmem_init(void)
 
 void __init setup_arch(char **cmdline_p)
 {
+	unsigned long low_mem_size;
+
  	ROOT_DEV = ORIG_ROOT_DEV;
  	drive_info = DRIVE_INFO;
  	screen_info = SCREEN_INFO;
@@ -378,7 +380,13 @@ void __init setup_arch(char **cmdline_p)
 		request_resource(&ioport_resource, standard_io_resources+i);
 	}
 
-	pci_mem_start = IOMAP_START; 
+	/* Will likely break when you have unassigned resources with more
+	   than 4GB memory and bridges that don't support more than 4GB. 
+	   Doing it properly would require to allocate GFP_DMA memory
+	   in this case. */
+	low_mem_size = ((end_pfn << PAGE_SHIFT) + 0xfffff) & ~0xfffff;
+	if (low_mem_size > pci_mem_start)
+		pci_mem_start = low_mem_size;
 
 #ifdef CONFIG_GART_IOMMU
        iommu_hole_init();

arch/x86_64/kernel/smpboot.c

@@ -734,10 +734,10 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 	current_thread_info()->cpu = 0;
 	smp_tune_scheduling();
 
-	if (!cpu_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
+	if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
 		printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
 		       hard_smp_processor_id());
-		cpu_set(hard_smp_processor_id(), phys_cpu_present_map);
+		physid_set(hard_smp_processor_id(), phys_cpu_present_map);
 	}
 
 	/*
@@ -748,7 +748,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 		printk(KERN_NOTICE "SMP motherboard not detected.\n");
 		io_apic_irqs = 0;
 		cpu_online_map = cpumask_of_cpu(0);
-		phys_cpu_present_map = cpumask_of_cpu(0);
+		phys_cpu_present_map = physid_mask_of_physid(0);
 		if (APIC_init_uniprocessor())
 			printk(KERN_NOTICE "Local APIC not detected."
 					   " Using dummy APIC emulation.\n");
@@ -759,10 +759,10 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 	 * Should not be necessary because the MP table should list the boot
 	 * CPU too, but we do it for the sake of robustness anyway.
 	 */
-	if (!cpu_isset(boot_cpu_id, phys_cpu_present_map)) {
+	if (!physid_isset(boot_cpu_id, phys_cpu_present_map)) {
 		printk(KERN_NOTICE "weird, boot CPU (#%d) not listed by the BIOS.\n",
 								 boot_cpu_id);
-		cpu_set(hard_smp_processor_id(), phys_cpu_present_map);
+		physid_set(hard_smp_processor_id(), phys_cpu_present_map);
 	}
 
 	/*
@@ -774,7 +774,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 		printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
 		io_apic_irqs = 0;
 		cpu_online_map = cpumask_of_cpu(0);
-		phys_cpu_present_map = cpumask_of_cpu(0);
+		phys_cpu_present_map = physid_mask_of_physid(0);
 		disable_apic = 1;
 		goto smp_done;
 	}
@@ -789,7 +789,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 		printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
 		io_apic_irqs = 0;
 		cpu_online_map = cpumask_of_cpu(0);
-		phys_cpu_present_map = cpumask_of_cpu(0);
+		phys_cpu_present_map = physid_mask_of_physid(0);
 		disable_apic = 1;
 		goto smp_done;
 	}
@@ -803,7 +803,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 	/*
 	 * Now scan the CPU present map and fire up the other CPUs.
 	 */
-	Dprintk("CPU present map: %lx\n", phys_cpu_present_map);
+	Dprintk("CPU present map: %lx\n", physids_coerce(phys_cpu_present_map));
 
 	for (apicid = 0; apicid < NR_CPUS; apicid++) {
 		/*

arch/x86_64/kernel/time.c

@@ -79,6 +79,7 @@ static inline unsigned int do_gettimeoffset_tsc(void)
 	unsigned long t;
 	unsigned long x;
 	rdtscll_sync(&t);
+	if (t < vxtime.last_tsc) t = vxtime.last_tsc; /* hack */
 	x = ((t - vxtime.last_tsc) * vxtime.tsc_quot) >> 32;
 	return x;
 }

arch/x86_64/kernel/vsyscall.c

@@ -85,6 +85,7 @@ static force_inline void do_vgettimeofday(struct timeval * tv)
 		if (__vxtime.mode == VXTIME_TSC) {
 			sync_core();
 			rdtscll(t);
+			if (t < __vxtime.last_tsc) t = __vxtime.last_tsc;
 			usec += ((t - __vxtime.last_tsc) *
 				 __vxtime.tsc_quot) >> 32;
 		} else {

drivers/acpi/Kconfig

@@ -69,6 +69,7 @@ config ACPI_SLEEP
 	bool "Sleep States (EXPERIMENTAL)"
 	depends on X86 && ACPI
 	depends on EXPERIMENTAL && PM
+	select SOFTWARE_SUSPEND
 	default y
 	---help---
 	  This option adds support for ACPI suspend states. 

drivers/ide/ide-io.c

@@ -54,8 +54,6 @@
 #include <asm/io.h>
 #include <asm/bitops.h>
 
-#include "ide_modes.h"
-
 #if (DISK_RECOVERY_TIME > 0)
 
 #error So the User Has To Fix the Compilation And Stop Hacking Port 0x43. Does anyone ever use this anyway ??

drivers/ide/ide-lib.c

@@ -22,8 +22,6 @@
 #include <asm/io.h>
 #include <asm/bitops.h>
 
-#include "ide_modes.h"
-
 /*
  *	IDE library routines. These are plug in code that most 
  *	drivers can use but occasionally may be weird enough
@@ -170,7 +168,7 @@ u8 ide_rate_filter (u8 mode, u8 speed)
 		BUG();
 	return min(speed, speed_max[mode]);
 #else /* !CONFIG_BLK_DEV_IDEDMA */
-	return min(speed, XFER_PIO_4);
+	return min(speed, (u8)XFER_PIO_4);
 #endif /* CONFIG_BLK_DEV_IDEDMA */
 }
 
@@ -188,6 +186,12 @@ int ide_dma_enable (ide_drive_t *drive)
 
 EXPORT_SYMBOL(ide_dma_enable);
 
+/*
+ * Standard (generic) timings for PIO modes, from ATA2 specification.
+ * These timings are for access to the IDE data port register *only*.
+ * Some drives may specify a mode, while also specifying a different
+ * value for cycle_time (from drive identification data).
+ */
 const ide_pio_timings_t ide_pio_timings[6] = {
 	{ 70,	165,	600 },	/* PIO Mode 0 */
 	{ 50,	125,	383 },	/* PIO Mode 1 */
@@ -199,6 +203,13 @@ const ide_pio_timings_t ide_pio_timings[6] = {
 
 EXPORT_SYMBOL_GPL(ide_pio_timings);
 
+/*
+ * Shared data/functions for determining best PIO mode for an IDE drive.
+ * Most of this stuff originally lived in cmd640.c, and changes to the
+ * ide_pio_blacklist[] table should be made with EXTREME CAUTION to avoid
+ * breaking the fragile cmd640.c support.
+ */
+
 /*
  * Black list. Some drives incorrectly report their maximal PIO mode,
  * at least in respect to CMD640. Here we keep info on some known drives.

drivers/ide/ide-probe.c

@@ -649,10 +649,13 @@ static void hwif_register (ide_hwif_t *hwif)
 	/* register with global device tree */
 	strlcpy(hwif->gendev.bus_id,hwif->name,BUS_ID_SIZE);
 	hwif->gendev.driver_data = hwif;
+	if (hwif->gendev.parent == NULL) {
 		if (hwif->pci_dev)
 			hwif->gendev.parent = &hwif->pci_dev->dev;
 		else
-		hwif->gendev.parent = NULL; /* Would like to do = &device_legacy */
+			/* Would like to do = &device_legacy */
+			hwif->gendev.parent = NULL;
+	}
 	device_register(&hwif->gendev);
 }
 
@@ -770,8 +773,7 @@ void probe_hwif (ide_hwif_t *hwif)
 	 */
 	for (unit = 0; unit < MAX_DRIVES; ++unit) {
 		ide_drive_t *drive = &hwif->drives[unit];
-		drive->dn = ((hwif->channel ? 2 : 0) + unit);
-		hwif->drives[unit].dn = ((hwif->channel ? 2 : 0) + unit);
+		drive->dn = (hwif->channel ? 2 : 0) + unit;
 		(void) probe_for_drive(drive);
 		if (drive->present && !hwif->present) {
 			hwif->present = 1;
@@ -945,15 +947,10 @@ static int ide_init_queue(ide_drive_t *drive)
 	if (drive->disk)
 		drive->disk->queue = drive->queue;
 
-	return 0;
-}
-
-/*
- * Setup the drive for request handling.
- */
-static void ide_init_drive(ide_drive_t *drive)
-{
+	/* needs drive->queue to be set */
 	ide_toggle_bounce(drive, 1);
+
+	return 0;
 }
 
 /*
@@ -1068,10 +1065,9 @@ static int init_irq (ide_hwif_t *hwif)
 	}
 
 	/*
-	 * Link any new drives into the hwgroup, allocate
-	 * the block device queue and initialize the drive.
-	 * Note that ide_init_drive sends commands to the new
-	 * drive.
+	 * For any present drive:
+	 * - allocate the block device queue
+	 * - link drive into the hwgroup
 	 */
 	for (index = 0; index < MAX_DRIVES; ++index) {
 		ide_drive_t *drive = &hwif->drives[index];
@@ -1092,7 +1088,6 @@ static int init_irq (ide_hwif_t *hwif)
 			hwgroup->drive->next = drive;
 		}
 		spin_unlock_irq(&ide_lock);
-		ide_init_drive(drive);
 	}
 
 #if !defined(__mc68000__) && !defined(CONFIG_APUS) && !defined(__sparc__)
@@ -1303,31 +1298,6 @@ int hwif_init (ide_hwif_t *hwif)
 
 EXPORT_SYMBOL(hwif_init);
 
-int export_ide_init_queue (ide_drive_t *drive)
-{
-	if (ide_init_queue(drive))
-		return 1;
-
-	ide_init_drive(drive);
-	return 0;
-}
-
-EXPORT_SYMBOL(export_ide_init_queue);
-
-u8 export_probe_for_drive (ide_drive_t *drive)
-{
-	return probe_for_drive(drive);
-}
-
-EXPORT_SYMBOL(export_probe_for_drive);
-
-int ideprobe_init (void);
-static ide_module_t ideprobe_module = {
-	IDE_PROBE_MODULE,
-	ideprobe_init,
-	NULL
-};
-
 int ideprobe_init (void)
 {
 	unsigned int index;
@@ -1359,7 +1329,7 @@ int ideprobe_init (void)
 		}
 	}
 	if (!ide_probe)
-		ide_probe = &ideprobe_module;
+		ide_probe = &ideprobe_init;
 	MOD_DEC_USE_COUNT;
 	return 0;
 }

drivers/ide/ide.c

@@ -161,8 +161,6 @@
 #include <asm/io.h>
 #include <asm/bitops.h>
 
-#include "ide_modes.h"
-
 
 /* default maximum number of failures */
 #define IDE_DEFAULT_MAX_FAILURES 	1
@@ -180,7 +178,9 @@ static int initializing;	/* set while initializing built-in drivers */
 DECLARE_MUTEX(ide_cfg_sem);
 spinlock_t ide_lock __cacheline_aligned_in_smp = SPIN_LOCK_UNLOCKED;
 
+#ifdef CONFIG_BLK_DEV_IDEPCI
 static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
+#endif
 
 #ifdef CONFIG_IDEDMA_AUTO
 int noautodma = 0;
@@ -190,11 +190,7 @@ int noautodma = 1;
 
 EXPORT_SYMBOL(noautodma);
 
-/*
- * ide_modules keeps track of the available IDE chipset/probe/driver modules.
- */
-ide_module_t *ide_chipsets;
-ide_module_t *ide_probe;
+int (*ide_probe)(void);
 
 /*
  * This is declared extern in ide.h, for access by other IDE modules:
@@ -452,7 +448,7 @@ void ide_probe_module (void)
 		(void) request_module("ide-probe-mod");
 #endif /* (CONFIG_KMOD) && (CONFIG_BLK_DEV_IDE_MODULE) */
 	} else {
-		(void) ide_probe->init();
+		(void)ide_probe();
 	}
 }
 
@@ -1045,21 +1041,6 @@ int ide_register_hw (hw_regs_t *hw, ide_hwif_t **hwifp)
 
 EXPORT_SYMBOL(ide_register_hw);
 
-/*
- * Compatibility function with existing drivers.  If you want
- * something different, use the function above.
- */
-int ide_register (int arg1, int arg2, int irq)
-{
-	hw_regs_t hw;
-	ide_init_hwif_ports(&hw, (unsigned long) arg1, (unsigned long) arg2, NULL);
-	hw.irq = irq;
-	return ide_register_hw(&hw, NULL);
-}
-
-EXPORT_SYMBOL(ide_register);
-
-
 /*
  *	Locks for IDE setting functionality
  */
@@ -1658,11 +1639,15 @@ int generic_ide_ioctl(struct block_device *bdev, unsigned int cmd,
 
 		case HDIO_SCAN_HWIF:
 		{
+			hw_regs_t hw;
 			int args[3];
 			if (!capable(CAP_SYS_RAWIO)) return -EACCES;
 			if (copy_from_user(args, (void *)arg, 3 * sizeof(int)))
 				return -EFAULT;
-			if (ide_register(args[0], args[1], args[2]) == -1)
+			ide_init_hwif_ports(&hw, (unsigned long) args[0],
+					    (unsigned long) args[1], NULL);
+			hw.irq = args[2];
+			if (ide_register_hw(&hw, NULL) == -1)
 				return -EIO;
 			return 0;
 		}

drivers/ide/ide_modes.h

-/*
- *  linux/drivers/ide/ide_modes.h
- *
- *  Copyright (C) 1996  Linus Torvalds, Igor Abramov, and Mark Lord
- */
-
-#ifndef _IDE_MODES_H
-#define _IDE_MODES_H
-
-#include <linux/config.h>
-
-/*
- * Shared data/functions for determining best PIO mode for an IDE drive.
- * Most of this stuff originally lived in cmd640.c, and changes to the
- * ide_pio_blacklist[] table should be made with EXTREME CAUTION to avoid
- * breaking the fragile cmd640.c support.
- */
-
-/*
- * Standard (generic) timings for PIO modes, from ATA2 specification.
- * These timings are for access to the IDE data port register *only*.
- * Some drives may specify a mode, while also specifying a different
- * value for cycle_time (from drive identification data).
- */
-typedef struct ide_pio_timings_s {
-	int	setup_time;	/* Address setup (ns) minimum */
-	int	active_time;	/* Active pulse (ns) minimum */
-	int	cycle_time;	/* Cycle time (ns) minimum = (setup + active + recovery) */
-} ide_pio_timings_t;
-
-typedef struct ide_pio_data_s {
-	u8 pio_mode;
-	u8 use_iordy;
-	u8 overridden;
-	u8 blacklisted;
-	unsigned int cycle_time;
-} ide_pio_data_t;
-	
-u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
-extern const ide_pio_timings_t ide_pio_timings[6];
-#endif /* _IDE_MODES_H */

drivers/ide/legacy/ali14xx.c

@@ -54,8 +54,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
-
 /* port addresses for auto-detection */
 #define ALI_NUM_PORTS 4
 static int ports[ALI_NUM_PORTS] __initdata = {0x074, 0x0f4, 0x034, 0x0e4};

drivers/ide/legacy/dtc2278.c

@@ -21,8 +21,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
-
 /*
  * Changing this #undef to #define may solve start up problems in some systems.
  */

drivers/ide/legacy/ht6560b.c

@@ -53,8 +53,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
-
 /* #define DEBUG */  /* remove comments for DEBUG messages */
 
 /*

drivers/ide/legacy/qd65xx.c

@@ -42,7 +42,6 @@
 #include <asm/system.h>
 #include <asm/io.h>
 
-#include "ide_modes.h"
 #include "qd65xx.h"
 
 /*

drivers/ide/legacy/umc8672.c

@@ -54,8 +54,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
-
 /*
  * Default speeds.  These can be changed with "auto-tune" and/or hdparm.
  */

drivers/ide/pci/aec62xx.c

@@ -16,7 +16,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
 #include "aec62xx.h"
 
 #if defined(DISPLAY_AEC62XX_TIMINGS) && defined(CONFIG_PROC_FS)

drivers/ide/pci/alim15x3.c

@@ -37,7 +37,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
 #include "alim15x3.h"
 
 /*

drivers/ide/pci/cmd640.c

@@ -115,8 +115,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
-
 /*
  * This flag is set in ide.c by the parameter:  ide0=cmd640_vlb
  */

drivers/ide/pci/cmd64x.c

@@ -25,7 +25,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
 #include "cmd64x.h"
 
 #if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS)

drivers/ide/pci/cs5520.c

@@ -51,7 +51,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "ide_modes.h"
 #include "cs5520.h"
 
 #if defined(DISPLAY_CS5520_TIMINGS) && defined(CONFIG_PROC_FS)

drivers/ide/pci/cs5530.c

@@ -31,7 +31,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "ide_modes.h"
 #include "cs5530.h"
 
 #if defined(DISPLAY_CS5530_TIMINGS) && defined(CONFIG_PROC_FS)

drivers/ide/pci/cy82c693.c

@@ -54,7 +54,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
 #include "cy82c693.h"
 
 /*
@@ -113,7 +112,7 @@ static void compute_clocks (u8 pio, pio_clocks_t *p_pclk)
 
 	/* note: we use the same values for 16bit IOR and IOW
          *	those are all the same, since I don't have other
-	 *	timings than those from ide_modes.h
+	 *	timings than those from ide-lib.c
 	 */
 
 	p_pclk->time_16r = (u8)clk1;

drivers/ide/pci/hpt34x.c

@@ -42,7 +42,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "ide_modes.h"
 #include "hpt34x.h"
 
 #if defined(DISPLAY_HPT34X_TIMINGS) && defined(CONFIG_PROC_FS)

drivers/ide/pci/hpt366.c

@@ -62,7 +62,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "ide_modes.h"
 #include "hpt366.h"
 
 #if defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS)
@@ -989,7 +988,40 @@ static void __init init_hwif_hpt366 (ide_hwif_t *hwif)
 	hwif->intrproc			= &hpt3xx_intrproc;
 	hwif->maskproc			= &hpt3xx_maskproc;
 
-	pci_read_config_byte(hwif->pci_dev, 0x5a, &ata66);
+	/*
+	 * The HPT37x uses the CBLID pins as outputs for MA15/MA16
+	 * address lines to access an external eeprom.  To read valid
+	 * cable detect state the pins must be enabled as inputs.
+	 */
+	if (hpt_minimum_revision(dev, 8) && PCI_FUNC(dev->devfn) & 1) {
+		/*
+		 * HPT374 PCI function 1
+		 * - set bit 15 of reg 0x52 to enable TCBLID as input
+		 * - set bit 15 of reg 0x56 to enable FCBLID as input
+		 */
+		u16 mcr3, mcr6;
+		pci_read_config_word(dev, 0x52, &mcr3);
+		pci_read_config_word(dev, 0x56, &mcr6);
+		pci_write_config_word(dev, 0x52, mcr3 | 0x8000);
+		pci_write_config_word(dev, 0x56, mcr6 | 0x8000);
+		/* now read cable id register */
+		pci_read_config_byte(dev, 0x5a, &ata66);
+		pci_write_config_word(dev, 0x52, mcr3);
+		pci_write_config_word(dev, 0x56, mcr6);
+	} else if (hpt_minimum_revision(dev, 3)) {
+		/*
+		 * HPT370/372 and 374 pcifn 0
+		 * - clear bit 0 of 0x5b to enable P/SCBLID as inputs
+		 */
+		u8 scr2;
+		pci_read_config_byte(dev, 0x5b, &scr2);
+		pci_write_config_byte(dev, 0x5b, scr2 & ~1);
+		/* now read cable id register */
+		pci_read_config_byte(dev, 0x5a, &ata66);
+		pci_write_config_byte(dev, 0x5b, scr2);
+	} else {
+		pci_read_config_byte(dev, 0x5a, &ata66);
+	}
 
 #ifdef DEBUG
 	printk("HPT366: reg5ah=0x%02x ATA-%s Cable Port%d\n",

drivers/ide/pci/it8172.c

@@ -42,7 +42,6 @@
 #include <asm/io.h>
 #include <asm/it8172/it8172_int.h>
 
-#include "ide_modes.h"
 #include "it8172.h"
 
 /*

drivers/ide/pci/opti621.c

@@ -104,7 +104,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
 #include "opti621.h"
 
 #define OPTI621_MAX_PIO 3

drivers/ide/pci/pdc202xx_new.c

@@ -32,7 +32,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "ide_modes.h"
 #include "pdc202xx_new.h"
 
 #define PDC202_DEBUG_CABLE	0

drivers/ide/pci/pdc202xx_old.c

@@ -46,7 +46,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "ide_modes.h"
 #include "pdc202xx_old.h"
 
 #define PDC202_DEBUG_CABLE	0

drivers/ide/pci/pdcadma.c

@@ -24,7 +24,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "ide_modes.h"
 #include "pdcadma.h"
 
 #if defined(DISPLAY_PDCADMA_TIMINGS) && defined(CONFIG_PROC_FS)

drivers/ide/pci/piix.c

@@ -103,7 +103,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
 #include "piix.h"
 
 static int no_piix_dma;

drivers/ide/pci/sc1200.c

@@ -29,7 +29,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "ide_modes.h"
 #include "sc1200.h"
 
 #define SC1200_REV_A	0x00

drivers/ide/pci/serverworks.c

@@ -39,7 +39,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
 #include "serverworks.h"
 
 static u8 svwks_revision = 0;

drivers/ide/pci/siimage.c

@@ -15,7 +15,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
 #include "siimage.h"
 
 #if defined(DISPLAY_SIIMAGE_TIMINGS) && defined(CONFIG_PROC_FS)

drivers/ide/pci/sis5513.c

@@ -63,7 +63,6 @@
 #include <asm/irq.h>
 
 #include "ide-timing.h"
-#include "ide_modes.h"
 #include "sis5513.h"
 
 /* registers layout and init values are chipset family dependant */

drivers/ide/pci/sl82c105.c

@@ -29,7 +29,6 @@
 #include <asm/io.h>
 #include <asm/dma.h>
 
-#include "ide_modes.h"
 #include "sl82c105.h"
 
 #undef DEBUG

drivers/ide/pci/slc90e66.c

@@ -21,7 +21,6 @@
 
 #include <asm/io.h>
 
-#include "ide_modes.h"
 #include "slc90e66.h"
 
 #if defined(DISPLAY_SLC90E66_TIMINGS) && defined(CONFIG_PROC_FS)

drivers/ide/pci/triflex.c

@@ -41,7 +41,6 @@
 #include <linux/ide.h>
 #include <linux/init.h>
 
-#include "ide_modes.h"
 #include "triflex.h"
 
 static struct pci_dev *triflex_dev;

drivers/ide/ppc/mpc8xx.c

@@ -42,7 +42,6 @@
 #include <asm/machdep.h>
 #include <asm/irq.h>
 
-#include "ide_modes.h"
 static int identify  (volatile u8 *p);
 static void print_fixed (volatile u8 *p);
 static void print_funcid (int func);

drivers/ide/ppc/pmac.c

@@ -42,7 +42,6 @@
 #include <linux/adb.h>
 #include <linux/pmu.h>
 #endif
-#include "ide_modes.h"
 
 extern void ide_do_request(ide_hwgroup_t *hwgroup, int masked_irq);
 
@@ -942,7 +941,7 @@ pmac_ide_build_sglist(ide_drive_t *drive, struct request *rq)
 	if (hwif->sg_dma_active)
 		BUG();
 		
-	nents = blk_rq_map_sg(&drive->queue, rq, sg);
+	nents = blk_rq_map_sg(drive->queue, rq, sg);
 		
 	if (rq_data_dir(rq) == READ)
 		pmif->sg_dma_direction = PCI_DMA_FROMDEVICE;

drivers/net/sis190.c

@@ -1111,7 +1111,7 @@ SiS190_close(struct net_device *dev)
 
 	spin_unlock_irq(&tp->lock);
 
-	synchronize_irq();
+	synchronize_irq(dev->irq);
 	free_irq(dev->irq, dev);
 
 	SiS190_tx_clear(tp);

fs/proc/task_mmu.c

@@ -90,14 +90,14 @@ static int show_map(struct seq_file *m, void *v)
 		ino = inode->i_ino;
 	}
 
-	seq_printf(m, "%0*lx-%0*lx %c%c%c%c %0*lx %02x:%02x %lu %n",
-			(int) (2*sizeof(void*)), map->vm_start,
-			(int) (2*sizeof(void*)), map->vm_end,
+	seq_printf(m, "%08lx-%08lx %c%c%c%c %08lx %02x:%02x %lu %n",
+			map->vm_start,
+			map->vm_end,
 			flags & VM_READ ? 'r' : '-',
 			flags & VM_WRITE ? 'w' : '-',
 			flags & VM_EXEC ? 'x' : '-',
 			flags & VM_MAYSHARE ? 's' : 'p',
-			(int) (2*sizeof(void*)), map->vm_pgoff << PAGE_SHIFT,
+			map->vm_pgoff << PAGE_SHIFT,
 			MAJOR(dev), MINOR(dev), ino, &len);
 
 	if (map->vm_file) {

include/asm-x86_64/bitops.h

@@ -466,7 +466,7 @@ static __inline__ int ffs(int x)
 
 	__asm__("bsfl %1,%0\n\t"
 		"cmovzl %2,%0" 
-		: "=r" (r) : "g" (x), "r" (32));
+		: "=r" (r) : "g" (x), "r" (-1));
 	return r+1;
 }
 

include/asm-x86_64/mpspec.h

@@ -169,7 +169,6 @@ extern int mp_bus_id_to_pci_bus [MAX_MP_BUSSES];
 extern cpumask_t mp_bus_to_cpumask [MAX_MP_BUSSES];
 
 extern unsigned int boot_cpu_physical_apicid;
-extern cpumask_t phys_cpu_present_map;
 extern int smp_found_config;
 extern void find_smp_config (void);
 extern void get_smp_config (void);
@@ -198,5 +197,49 @@ extern void mp_config_ioapic_for_sci(int irq);
 
 extern int using_apic_timer;
 
+#define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_APICS)
+
+struct physid_mask
+{
+	unsigned long mask[PHYSID_ARRAY_SIZE];
+};
+
+typedef struct physid_mask physid_mask_t;
+
+#define physid_set(physid, map)			set_bit(physid, (map).mask)
+#define physid_clear(physid, map)		clear_bit(physid, (map).mask)
+#define physid_isset(physid, map)		test_bit(physid, (map).mask)
+#define physid_test_and_set(physid, map)	test_and_set_bit(physid, (map).mask)
+
+#define physids_and(dst, src1, src2)		bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+#define physids_or(dst, src1, src2)		bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+#define physids_clear(map)			bitmap_clear((map).mask, MAX_APICS)
+#define physids_complement(map)			bitmap_complement((map).mask, MAX_APICS)
+#define physids_empty(map)			bitmap_empty((map).mask, MAX_APICS)
+#define physids_equal(map1, map2)		bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
+#define physids_weight(map)			bitmap_weight((map).mask, MAX_APICS)
+#define physids_shift_right(d, s, n)		bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
+#define physids_shift_left(d, s, n)		bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
+#define physids_coerce(map)			((map).mask[0])
+
+#define physids_promote(physids)						\
+	({									\
+		physid_mask_t __physid_mask = PHYSID_MASK_NONE;			\
+		__physid_mask.mask[0] = physids;				\
+		__physid_mask;							\
+	})
+
+#define physid_mask_of_physid(physid)						\
+	({									\
+		physid_mask_t __physid_mask = PHYSID_MASK_NONE;			\
+		physid_set(physid, __physid_mask);				\
+		__physid_mask;							\
+	})
+
+#define PHYSID_MASK_ALL		{ {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} }
+#define PHYSID_MASK_NONE	{ {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} }
+
+extern physid_mask_t phys_cpu_present_map;
+
 #endif
 

include/asm-x86_64/percpu.h

@@ -31,6 +31,9 @@ do {								\
 			memcpy((pcpudst)+__per_cpu_offset(__i),	\
 			       (src), (size));			\
 } while (0)
+
+extern void setup_per_cpu_areas(void);
+
 #else /* ! SMP */
 
 #define DEFINE_PER_CPU(type, name) \
@@ -46,6 +49,4 @@ do {								\
 #define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
 #define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
 
-extern void setup_per_cpu_areas(void);
-
 #endif /* _ASM_X8664_PERCPU_H_ */

include/asm-x86_64/processor.h

@@ -225,7 +225,6 @@ struct tss_struct {
 	 * 8 bytes, for an extra "long" of ~0UL
 	 */
 	unsigned long io_bitmap[IO_BITMAP_LONGS + 1];
-	u32 __cacheline_filler[4];      /* size is 0x100 */
 } __attribute__((packed)) ____cacheline_aligned;
 
 struct thread_struct {

include/asm-x86_64/smp.h

@@ -36,7 +36,6 @@ struct pt_regs;
  */
  
 extern void smp_alloc_memory(void);
-extern cpumask_t phys_cpu_present_map;
 extern cpumask_t cpu_online_map;
 extern volatile unsigned long smp_invalidate_needed;
 extern int pic_mode;

include/asm-x86_64/suspend.h

@@ -44,7 +44,7 @@ extern unsigned long saved_context_eflags;
                        :"r" ((thread)->debugreg##register))
 
 extern void fix_processor_context(void);
-extern void do_magic(int resume);
+extern int do_magic(int resume);
 
 #ifdef CONFIG_ACPI_SLEEP
 extern unsigned long saved_eip;

include/asm-x86_64/topology.h

@@ -10,21 +10,18 @@
 /* Map the K8 CPU local memory controllers to a simple 1:1 CPU:NODE topology */
 
 extern int fake_node;
-extern cpumask_t cpu_online_map;
+extern unsigned long cpu_online_map;
 
 #define cpu_to_node(cpu)		(fake_node ? 0 : (cpu))
 #define memblk_to_node(memblk) 	(fake_node ? 0 : (memblk))
 #define parent_node(node)		(node)
 #define node_to_first_cpu(node) 	(fake_node ? 0 : (node))
-#define node_to_cpu_mask(node)	(fake_node ? cpu_online_map : cpumask_of_cpu(node))
+#define node_to_cpu_mask(node)	(fake_node ? cpu_online_map : (1UL << (node)))
 #define node_to_memblk(node)		(node)
 
-static inline cpumask_t pcibus_to_cpumask(int bus)
+static inline unsigned long pcibus_to_cpumask(int bus)
 {
-	cpumask_t ret;
-
-	cpus_and(ret, mp_bus_to_cpumask[bus], cpu_online_map);
-	return ret;
+	return mp_bus_to_cpumask[bus] & cpu_online_map; 
 }
 
 #define NODE_BALANCE_RATE 30	/* CHECKME */ 

include/linux/ide.h

@@ -1242,21 +1242,6 @@ typedef struct ide_driver_s {
 
 extern int generic_ide_ioctl(struct block_device *, unsigned, unsigned long);
 
-/*
- * IDE modules.
- */
-#define IDE_CHIPSET_MODULE		0	/* not supported yet */
-#define IDE_PROBE_MODULE		1
-
-typedef int	(ide_module_init_proc)(void);
-
-typedef struct ide_module_s {
-	int				type;
-	ide_module_init_proc		*init;
-	void				*info;
-	struct ide_module_s		*next;
-} ide_module_t;
-
 typedef struct ide_devices_s {
 	char			name[4];		/* hdX */
 	unsigned		attached	: 1;	/* native */
@@ -1274,8 +1259,7 @@ typedef struct ide_devices_s {
  */
 #ifndef _IDE_C
 extern	ide_hwif_t	ide_hwifs[];		/* master data repository */
-extern ide_module_t	*ide_chipsets;
-extern	ide_module_t	*ide_probe;
+extern int (*ide_probe)(void);
 
 extern ide_devices_t   *idedisk;
 extern ide_devices_t   *idecd;
@@ -1772,8 +1756,6 @@ extern int ide_hwif_request_regions(ide_hwif_t *hwif);
 extern void ide_hwif_release_regions(ide_hwif_t* hwif);
 extern void ide_unregister (unsigned int index);
 
-extern int export_ide_init_queue(ide_drive_t *);
-extern u8 export_probe_for_drive(ide_drive_t *);
 extern int probe_hwif_init(ide_hwif_t *);
 
 static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
@@ -1794,6 +1776,24 @@ extern char *ide_xfer_verbose(u8 xfer_rate);
 extern void ide_toggle_bounce(ide_drive_t *drive, int on);
 extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
 
+typedef struct ide_pio_timings_s {
+	int	setup_time;	/* Address setup (ns) minimum */
+	int	active_time;	/* Active pulse (ns) minimum */
+	int	cycle_time;	/* Cycle time (ns) minimum = (setup + active + recovery) */
+} ide_pio_timings_t;
+
+typedef struct ide_pio_data_s {
+	u8 pio_mode;
+	u8 use_iordy;
+	u8 overridden;
+	u8 blacklisted;
+	unsigned int cycle_time;
+} ide_pio_data_t;
+
+extern u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
+extern const ide_pio_timings_t ide_pio_timings[6];
+
+
 extern spinlock_t ide_lock;
 extern struct semaphore ide_cfg_sem;
 /*

ipc/msg.c

@@ -707,7 +707,7 @@ asmlinkage long sys_msgsnd (int msqid, struct msgbuf *msgp, size_t msgsz, int ms
 		goto retry;
 	}
 
-	msq->q_lspid = current->pid;
+	msq->q_lspid = current->tgid;
 	msq->q_stime = get_seconds();
 
 	if(!pipelined_send(msq,msg)) {
@@ -801,7 +801,7 @@ asmlinkage long sys_msgrcv (int msqid, struct msgbuf *msgp, size_t msgsz,
 		list_del(&msg->m_list);
 		msq->q_qnum--;
 		msq->q_rtime = get_seconds();
-		msq->q_lrpid = current->pid;
+		msq->q_lrpid = current->tgid;
 		msq->q_cbytes -= msg->m_ts;
 		atomic_sub(msg->m_ts,&msg_bytes);
 		atomic_dec(&msg_hdrs);

ipc/sem.c

@@ -664,7 +664,7 @@ static int semctl_main(int semid, int semnum, int cmd, int version, union semun
 		for (un = sma->undo; un; un = un->id_next)
 			un->semadj[semnum] = 0;
 		curr->semval = val;
-		curr->sempid = current->pid;
+		curr->sempid = current->tgid;
 		sma->sem_ctime = get_seconds();
 		/* maybe some queued-up processes were waiting for this */
 		update_queue(sma);
@@ -1052,7 +1052,7 @@ asmlinkage long sys_semtimedop(int semid, struct sembuf __user *tsops,
 	if (error)
 		goto out_unlock_free;
 
-	error = try_atomic_semop (sma, sops, nsops, un, current->pid);
+	error = try_atomic_semop (sma, sops, nsops, un, current->tgid);
 	if (error <= 0)
 		goto update;
 
@@ -1064,7 +1064,7 @@ asmlinkage long sys_semtimedop(int semid, struct sembuf __user *tsops,
 	queue.sops = sops;
 	queue.nsops = nsops;
 	queue.undo = un;
-	queue.pid = current->pid;
+	queue.pid = current->tgid;
 	queue.id = semid;
 	if (alter)
 		append_to_queue(sma ,&queue);
@@ -1206,7 +1206,7 @@ void exit_sem(struct task_struct *tsk)
 				sem->semval += u->semadj[i];
 				if (sem->semval < 0)
 					sem->semval = 0; /* shouldn't happen */
-				sem->sempid = current->pid;
+				sem->sempid = current->tgid;
 			}
 		}
 		sma->sem_otime = get_seconds();

ipc/shm.c

@@ -89,7 +89,7 @@ static inline void shm_inc (int id) {
 	if(!(shp = shm_lock(id)))
 		BUG();
 	shp->shm_atim = get_seconds();
-	shp->shm_lprid = current->pid;
+	shp->shm_lprid = current->tgid;
 	shp->shm_nattch++;
 	shm_unlock(shp);
 }
@@ -136,7 +136,7 @@ static void shm_close (struct vm_area_struct *shmd)
 	/* remove from the list of attaches of the shm segment */
 	if(!(shp = shm_lock(id)))
 		BUG();
-	shp->shm_lprid = current->pid;
+	shp->shm_lprid = current->tgid;
 	shp->shm_dtim = get_seconds();
 	shp->shm_nattch--;
 	if(shp->shm_nattch == 0 &&
@@ -209,7 +209,7 @@ static int newseg (key_t key, int shmflg, size_t size)
 	if(id == -1) 
 		goto no_id;
 
-	shp->shm_cprid = current->pid;
+	shp->shm_cprid = current->tgid;
 	shp->shm_lprid = 0;
 	shp->shm_atim = shp->shm_dtim = 0;
 	shp->shm_ctim = get_seconds();