Skip to content

L
linux
Commit 546be919 authored by Kumar Gala's avatar Kumar Gala
Browse files
Options

[PPC] Remove mpc8272 ads board from arch/ppc 

We have a board port in arch/powerpc so we dont need this one anymore.
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 14b3ca40
Expand all Show whitespace changes
Inline Side-by-side
Showing with 2 additions and 1562 deletions
arch/ppc/8260_io/fcc_enet.c
View file @ 546be919
......@@ -165,9 +165,6 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
#ifdef CONFIG_SBC82xx
#define F1_RXCLK 9
#define F1_TXCLK 10
#elif defined(CONFIG_ADS8272)
#define F1_RXCLK 11
#define F1_TXCLK 10
#else
#define F1_RXCLK 12
#define F1_TXCLK 11
......@@ -175,13 +172,8 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
/* FCC2 Clock Source Configuration. There are board specific.
Can only choose from CLK13-16 */
#ifdef CONFIG_ADS8272
#define F2_RXCLK 15
#define F2_TXCLK 16
#else
#define F2_RXCLK 13
#define F2_TXCLK 14
#endif
/* FCC3 Clock Source Configuration. There are board specific.
Can only choose from CLK13-16 */
......@@ -289,10 +281,7 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
/* TQM8260 has MDIO and MDCK on PC30 and PC31 respectively */
#define PC_MDIO ((uint)0x00000002)
#define PC_MDCK ((uint)0x00000001)
#elif defined(CONFIG_ADS8272)
#define PC_MDIO ((uint)0x00002000)
#define PC_MDCK ((uint)0x00001000)
#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260) || defined(CONFIG_PQ2FADS)
#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260)
#define PC_MDIO ((uint)0x00400000)
#define PC_MDCK ((uint)0x00200000)
#else
......@@ -2118,11 +2107,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev)
printk("Can't get FCC IRQ %d\n", fip->fc_interrupt);
#ifdef PHY_INTERRUPT
#ifdef CONFIG_ADS8272
if (request_irq(PHY_INTERRUPT, mii_link_interrupt, IRQF_SHARED,
"mii", dev) < 0)
printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
#else
/* Make IRQn edge triggered. This does not work if PHY_INTERRUPT is
* on Port C.
*/
......@@ -2132,7 +2116,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev)
if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0,
"mii", dev) < 0)
printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
#endif
#endif /* PHY_INTERRUPT */
/* Set GFMR to enable Ethernet operating mode.
......
arch/ppc/Kconfig
View file @ 546be919
......@@ -666,9 +666,6 @@ config TQM8260
End of Life: not yet :-)
URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
config ADS8272
bool "ADS8272"
config PQ2FADS
bool "Freescale-PQ2FADS"
help
......@@ -698,11 +695,6 @@ config EV64360
platform.
endchoice
config PQ2ADS
bool
depends on ADS8272
default y
config TQM8xxL
bool
depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
......@@ -725,15 +717,6 @@ config 8260
this option means that you wish to build a kernel for a machine with
an 8260 class CPU.
config 8272
bool
depends on 6xx
default y if ADS8272
select 8260
help
The MPC8272 CPM has a different internal dpram setup than other CPM2
devices
config CPM1
bool
depends on 8xx
......@@ -1069,7 +1052,7 @@ config PCI_8260
config 8260_PCI9
bool "Enable workaround for MPC826x erratum PCI 9"
depends on PCI_8260 && !ADS8272
depends on PCI_8260
default y
choice
......
arch/ppc/configs/ads8272_defconfig deleted 100644 → 0
View file @ 14b3ca40
This diff is collapsed.
arch/ppc/platforms/Makefile
View file @ 546be919
......@@ -4,7 +4,6 @@
obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o
obj-$(CONFIG_PREP_RESIDUAL) += residual.o
obj-$(CONFIG_PQ2ADS) += pq2ads.o
obj-$(CONFIG_TQM8260) += tqm8260_setup.o
obj-$(CONFIG_CPCI690) += cpci690.o
obj-$(CONFIG_EV64260) += ev64260.o
......@@ -26,4 +25,3 @@ obj-$(CONFIG_LITE5200) += lite5200.o
obj-$(CONFIG_EV64360) += ev64360.o
obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o
obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
obj-$(CONFIG_ADS8272) += mpc8272ads_setup.o
arch/ppc/platforms/mpc8272ads_setup.c deleted 100644 → 0
View file @ 14b3ca40
/*
* arch/ppc/platforms/mpc8272ads_setup.c
*
* MPC82xx Board-specific PlatformDevice descriptions
*
* 2005 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/ioport.h>
#include <linux/fs_enet_pd.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <asm/io.h>
#include <asm/mpc8260.h>
#include <asm/cpm2.h>
#include <asm/immap_cpm2.h>
#include <asm/irq.h>
#include <asm/ppc_sys.h>
#include <asm/ppcboot.h>
#include <linux/fs_uart_pd.h>
#include "pq2ads_pd.h"
static void init_fcc1_ioports(struct fs_platform_info*);
static void init_fcc2_ioports(struct fs_platform_info*);
static void init_scc1_uart_ioports(struct fs_uart_platform_info*);
static void init_scc4_uart_ioports(struct fs_uart_platform_info*);
static struct fs_uart_platform_info mpc8272_uart_pdata[] = {
[fsid_scc1_uart] = {
.init_ioports = init_scc1_uart_ioports,
.fs_no = fsid_scc1_uart,
.brg = 1,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
[fsid_scc4_uart] = {
.init_ioports = init_scc4_uart_ioports,
.fs_no = fsid_scc4_uart,
.brg = 4,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
};
static struct fs_mii_bb_platform_info m82xx_mii_bb_pdata = {
.mdio_dat.bit = 18,
.mdio_dir.bit = 18,
.mdc_dat.bit = 19,
.delay = 1,
};
static struct fs_platform_info mpc82xx_enet_pdata[] = {
[fsid_fcc1] = {
.fs_no = fsid_fcc1,
.cp_page = CPM_CR_FCC1_PAGE,
.cp_block = CPM_CR_FCC1_SBLOCK,
.clk_trx = (PC_F1RXCLK | PC_F1TXCLK),
.clk_route = CMX1_CLK_ROUTE,
.clk_mask = CMX1_CLK_MASK,
.init_ioports = init_fcc1_ioports,
.mem_offset = FCC1_MEM_OFFSET,
.rx_ring = 32,
.tx_ring = 32,
.rx_copybreak = 240,
.use_napi = 0,
.napi_weight = 17,
.bus_id = "0:00",
},
[fsid_fcc2] = {
.fs_no = fsid_fcc2,
.cp_page = CPM_CR_FCC2_PAGE,
.cp_block = CPM_CR_FCC2_SBLOCK,
.clk_trx = (PC_F2RXCLK | PC_F2TXCLK),
.clk_route = CMX2_CLK_ROUTE,
.clk_mask = CMX2_CLK_MASK,
.init_ioports = init_fcc2_ioports,
.mem_offset = FCC2_MEM_OFFSET,
.rx_ring = 32,
.tx_ring = 32,
.rx_copybreak = 240,
.use_napi = 0,
.napi_weight = 17,
.bus_id = "0:03",
},
};
static void init_fcc1_ioports(struct fs_platform_info* pdata)
{
struct io_port *io;
u32 tempval;
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
io = &immap->im_ioport;
/* Enable the PHY */
clrbits32(bcsr, BCSR1_FETHIEN);
setbits32(bcsr, BCSR1_FETH_RST);
/* FCC1 pins are on port A/C. */
/* Configure port A and C pins for FCC1 Ethernet. */
tempval = in_be32(&io->iop_pdira);
tempval &= ~PA1_DIRA0;
tempval |= PA1_DIRA1;
out_be32(&io->iop_pdira, tempval);
tempval = in_be32(&io->iop_psora);
tempval &= ~PA1_PSORA0;
tempval |= PA1_PSORA1;
out_be32(&io->iop_psora, tempval);
setbits32(&io->iop_ppara,PA1_DIRA0 | PA1_DIRA1);
/* Alter clocks */
tempval = PC_F1TXCLK|PC_F1RXCLK;
clrbits32(&io->iop_psorc, tempval);
clrbits32(&io->iop_pdirc, tempval);
setbits32(&io->iop_pparc, tempval);
clrbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_MASK);
setbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_ROUTE);
iounmap(bcsr);
iounmap(immap);
}
static void init_fcc2_ioports(struct fs_platform_info* pdata)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32));
struct io_port *io;
u32 tempval;
immap = cpm2_immr;
io = &immap->im_ioport;
/* Enable the PHY */
clrbits32(bcsr, BCSR3_FETHIEN2);
setbits32(bcsr, BCSR3_FETH2_RST);
/* FCC2 are port B/C. */
/* Configure port A and C pins for FCC2 Ethernet. */
tempval = in_be32(&io->iop_pdirb);
tempval &= ~PB2_DIRB0;
tempval |= PB2_DIRB1;
out_be32(&io->iop_pdirb, tempval);
tempval = in_be32(&io->iop_psorb);
tempval &= ~PB2_PSORB0;
tempval |= PB2_PSORB1;
out_be32(&io->iop_psorb, tempval);
setbits32(&io->iop_pparb,PB2_DIRB0 | PB2_DIRB1);
tempval = PC_F2RXCLK|PC_F2TXCLK;
/* Alter clocks */
clrbits32(&io->iop_psorc,tempval);
clrbits32(&io->iop_pdirc,tempval);
setbits32(&io->iop_pparc,tempval);
clrbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_MASK);
setbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_ROUTE);
iounmap(bcsr);
iounmap(immap);
}
static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev,
int idx)
{
bd_t* bi = (void*)__res;
int fs_no = fsid_fcc1+pdev->id-1;
if(fs_no >= ARRAY_SIZE(mpc82xx_enet_pdata)) {
return;
}
mpc82xx_enet_pdata[fs_no].dpram_offset=
(u32)cpm2_immr->im_dprambase;
mpc82xx_enet_pdata[fs_no].fcc_regs_c =
(u32)cpm2_immr->im_fcc_c;
memcpy(&mpc82xx_enet_pdata[fs_no].macaddr,bi->bi_enetaddr,6);
/* prevent dup mac */
if(fs_no == fsid_fcc2)
mpc82xx_enet_pdata[fs_no].macaddr[5] ^= 1;
pdev->dev.platform_data = &mpc82xx_enet_pdata[fs_no];
}
static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
int idx)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
int num = ARRAY_SIZE(mpc8272_uart_pdata);
int id = fs_uart_id_scc2fsid(idx);
/* no need to alter anything if console */
if ((id < num) && (!pdev->dev.platform_data)) {
pinfo = &mpc8272_uart_pdata[id];
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
}
}
static void init_scc1_uart_ioports(struct fs_uart_platform_info* pdata)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
/* SCC1 is only on port D */
setbits32(&immap->im_ioport.iop_ppard,0x00000003);
clrbits32(&immap->im_ioport.iop_psord,0x00000001);
setbits32(&immap->im_ioport.iop_psord,0x00000002);
clrbits32(&immap->im_ioport.iop_pdird,0x00000001);
setbits32(&immap->im_ioport.iop_pdird,0x00000002);
/* Wire BRG1 to SCC1 */
clrbits32(&immap->im_cpmux.cmx_scr,0x00ffffff);
iounmap(immap);
}
static void init_scc4_uart_ioports(struct fs_uart_platform_info* pdata)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
setbits32(&immap->im_ioport.iop_ppard,0x00000600);
clrbits32(&immap->im_ioport.iop_psord,0x00000600);
clrbits32(&immap->im_ioport.iop_pdird,0x00000200);
setbits32(&immap->im_ioport.iop_pdird,0x00000400);
/* Wire BRG4 to SCC4 */
clrbits32(&immap->im_cpmux.cmx_scr,0x000000ff);
setbits32(&immap->im_cpmux.cmx_scr,0x0000001b);
iounmap(immap);
}
static void __init mpc8272ads_fixup_mdio_pdata(struct platform_device *pdev,
int idx)
{
m82xx_mii_bb_pdata.irq[0] = PHY_INTERRUPT;
m82xx_mii_bb_pdata.irq[1] = PHY_POLL;
m82xx_mii_bb_pdata.irq[2] = PHY_POLL;
m82xx_mii_bb_pdata.irq[3] = PHY_INTERRUPT;
m82xx_mii_bb_pdata.irq[31] = PHY_POLL;
m82xx_mii_bb_pdata.mdio_dat.offset =
(u32)&cpm2_immr->im_ioport.iop_pdatc;
m82xx_mii_bb_pdata.mdio_dir.offset =
(u32)&cpm2_immr->im_ioport.iop_pdirc;
m82xx_mii_bb_pdata.mdc_dat.offset =
(u32)&cpm2_immr->im_ioport.iop_pdatc;
pdev->dev.platform_data = &m82xx_mii_bb_pdata;
}
static int mpc8272ads_platform_notify(struct device *dev)
{
static const struct platform_notify_dev_map dev_map[] = {
{
.bus_id = "fsl-cpm-fcc",
.rtn = mpc8272ads_fixup_enet_pdata,
},
{
.bus_id = "fsl-cpm-scc:uart",
.rtn = mpc8272ads_fixup_uart_pdata,
},
{
.bus_id = "fsl-bb-mdio",
.rtn = mpc8272ads_fixup_mdio_pdata,
},
{
.bus_id = NULL
}
};
platform_notify_map(dev_map,dev);
return 0;
}
int __init mpc8272ads_init(void)
{
printk(KERN_NOTICE "mpc8272ads: Init\n");
platform_notify = mpc8272ads_platform_notify;
ppc_sys_device_initfunc();
ppc_sys_device_disable_all();
ppc_sys_device_enable(MPC82xx_CPM_FCC1);
ppc_sys_device_enable(MPC82xx_CPM_FCC2);
/* to be ready for console, let's attach pdata here */
#ifdef CONFIG_SERIAL_CPM_SCC1
ppc_sys_device_setfunc(MPC82xx_CPM_SCC1, PPC_SYS_FUNC_UART);
ppc_sys_device_enable(MPC82xx_CPM_SCC1);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
ppc_sys_device_setfunc(MPC82xx_CPM_SCC4, PPC_SYS_FUNC_UART);
ppc_sys_device_enable(MPC82xx_CPM_SCC4);
#endif
ppc_sys_device_enable(MPC82xx_MDIO_BB);
return 0;
}
/*
To prevent confusion, console selection is gross:
by 0 assumed SCC1 and by 1 assumed SCC4
*/
struct platform_device* early_uart_get_pdev(int index)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
struct platform_device* pdev = NULL;
if(index) { /*assume SCC4 here*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4];
pinfo = &mpc8272_uart_pdata[fsid_scc4_uart];
} else { /*over SCC1*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1];
pinfo = &mpc8272_uart_pdata[fsid_scc1_uart];
}
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
return NULL;
}
arch_initcall(mpc8272ads_init);
arch/ppc/platforms/pq2ads.c deleted 100644 → 0
View file @ 14b3ca40
/*
* PQ2ADS platform support
*
* Author: Kumar Gala <galak@kernel.crashing.org>
* Derived from: est8260_setup.c by Allen Curtis
*
* Copyright 2004 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <asm/io.h>
#include <asm/mpc8260.h>
#include <asm/cpm2.h>
#include <asm/immap_cpm2.h>
void __init
m82xx_board_setup(void)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
/* Enable the 2nd UART port */
clrbits32(bcsr, BCSR1_RS232_EN2);
#ifdef CONFIG_SERIAL_CPM_SCC1
clrbits32((u32*)&immap->im_scc[0].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[0].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC2
clrbits32((u32*)&immap->im_scc[1].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[1].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC3
clrbits32((u32*)&immap->im_scc[2].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[2].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
clrbits32((u32*)&immap->im_scc[3].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[3].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
iounmap(bcsr);
iounmap(immap);
}
arch/ppc/platforms/pq2ads.h deleted 100644 → 0
View file @ 14b3ca40
/*
* A collection of structures, addresses, and values associated with
* the Motorola MPC8260ADS/MPC8266ADS-PCI boards.
* Copied from the RPX-Classic and SBS8260 stuff.
*
* Copyright (c) 2001 Dan Malek (dan@mvista.com)
*/
#ifdef __KERNEL__
#ifndef __MACH_ADS8260_DEFS
#define __MACH_ADS8260_DEFS
#include <asm/ppcboot.h>
#if defined(CONFIG_ADS8272)
#define BOARD_CHIP_NAME "8272"
#endif
/* Memory map is configured by the PROM startup.
* We just map a few things we need. The CSR is actually 4 byte-wide
* registers that can be accessed as 8-, 16-, or 32-bit values.
*/
#define CPM_MAP_ADDR ((uint)0xf0000000)
#define BCSR_ADDR ((uint)0xf4500000)
#define BCSR_SIZE ((uint)(32 * 1024))
#define BOOTROM_RESTART_ADDR ((uint)0xff000104)
/* For our show_cpuinfo hooks. */
#define CPUINFO_VENDOR "Motorola"
#define CPUINFO_MACHINE "PQ2 ADS PowerPC"
/* The ADS8260 has 16, 32-bit wide control/status registers, accessed
* only on word boundaries.
* Not all are used (yet), or are interesting to us (yet).
*/
/* Things of interest in the CSR.
*/
#define BCSR0_LED0 ((uint)0x02000000) /* 0 == on */
#define BCSR0_LED1 ((uint)0x01000000) /* 0 == on */
#define BCSR1_FETHIEN ((uint)0x08000000) /* 0 == enable */
#define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */
#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 == enable */
#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 == enable */
#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable */
#define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */
#define PHY_INTERRUPT SIU_INT_IRQ7
#ifdef CONFIG_PCI
/* PCI interrupt controller */
#define PCI_INT_STAT_REG 0xF8200000
#define PCI_INT_MASK_REG 0xF8200004
#define PIRQA (NR_CPM_INTS + 0)
#define PIRQB (NR_CPM_INTS + 1)
#define PIRQC (NR_CPM_INTS + 2)
#define PIRQD (NR_CPM_INTS + 3)
/*
* PCI memory map definitions for MPC8266ADS-PCI.
*
* processor view
* local address PCI address target
* 0x80000000-0x9FFFFFFF 0x80000000-0x9FFFFFFF PCI mem with prefetch
* 0xA0000000-0xBFFFFFFF 0xA0000000-0xBFFFFFFF PCI mem w/o prefetch
* 0xF4000000-0xF7FFFFFF 0x00000000-0x03FFFFFF PCI IO
*
* PCI master view
* local address PCI address target
* 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory
*/
/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h
Here we should redefine what is unique for this board */
#define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */
#define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */
#define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */
#define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */
#define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */
#if defined(CONFIG_ADS8272)
#define PCI_INT_TO_SIU SIU_INT_IRQ2
#elif defined(CONFIG_PQ2FADS)
#define PCI_INT_TO_SIU SIU_INT_IRQ6
#else
#warning PCI Bridge will be without interrupts support
#endif
#endif /* CONFIG_PCI */
#endif /* __MACH_ADS8260_DEFS */
#endif /* __KERNEL__ */
arch/ppc/platforms/pq2ads_pd.h deleted 100644 → 0
View file @ 14b3ca40
#ifndef __PQ2ADS_PD_H
#define __PQ2ADS_PD_H
/*
* arch/ppc/platforms/82xx/pq2ads_pd.h
*
* Some defines for MPC82xx board-specific PlatformDevice descriptions
*
* 2005 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/* FCC1 Clock Source Configuration. These can be redefined in the board specific file.
Can only choose from CLK9-12 */
#define F1_RXCLK 11
#define F1_TXCLK 10
/* FCC2 Clock Source Configuration. These can be redefined in the board specific file.
Can only choose from CLK13-16 */
#define F2_RXCLK 15
#define F2_TXCLK 16
/* FCC3 Clock Source Configuration. These can be redefined in the board specific file.
Can only choose from CLK13-16 */
#define F3_RXCLK 13
#define F3_TXCLK 14
#endif
arch/ppc/syslib/m8260_setup.c
View file @ 546be919
......@@ -175,12 +175,6 @@ m8260_init_IRQ(void)
* in case the boot rom changed something on us.
*/
cpm2_immr->im_intctl.ic_siprr = 0x05309770;
#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS))
/* Initialize stuff for the 82xx CPLD IC and install demux */
pq2pci_init_irq();
#endif
}
/*
......
arch/ppc/syslib/m82xx_pci.c
View file @ 546be919
......@@ -150,14 +150,6 @@ pq2pci_init_irq(void)
{
int irq;
volatile cpm2_map_t *immap = cpm2_immr;
#if defined CONFIG_ADS8272
/* configure chip select for PCI interrupt controller */
immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801;
immap->im_memctl.memc_or3 = 0xffff8010;
#elif defined CONFIG_PQ2FADS
immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801;
immap->im_memctl.memc_or8 = 0xffff8010;
#endif
for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
irq_desc[irq].chip = &pq2pci_ic;
......@@ -222,26 +214,6 @@ pq2ads_setup_pci(struct pci_controller *hose)
immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
#endif
#if defined CONFIG_ADS8272
immap->im_siu_conf.siu_82xx.sc_siumcr =
(immap->im_siu_conf.siu_82xx.sc_siumcr &
~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE |
SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 |
SIUMCR_LBPC11 | SIUMCR_APPC11 |
SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) |
SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 |
SIUMCR_APPC10 | SIUMCR_CS10PC00 |
SIUMCR_BCTLC00 | SIUMCR_MMR11 ;
#elif defined CONFIG_PQ2FADS
/*
* Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
* and local bus for PCI (SIUMCR [LBPC]).
*/
immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.siu_82xx.sc_siumcr &
~(SIUMCR_L2CPC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) |
SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10);
#endif
/* Enable PCI */
immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
......@@ -284,12 +256,6 @@ pq2ads_setup_pci(struct pci_controller *hose)
immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT);
immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
#if defined CONFIG_ADS8272
/* PCI int highest prio */
immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745;
#elif defined CONFIG_PQ2FADS
immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
#endif
/* park bus on PCI */
immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
......@@ -320,10 +286,6 @@ void __init pq2_find_bridges(void)
hose->bus_offset = 0;
hose->last_busno = 0xff;
#ifdef CONFIG_ADS8272
hose->set_cfg_type = 1;
#endif
setup_m8260_indirect_pci(hose,
(unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
(unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
......
include/asm-ppc/mpc8260.h
View file @ 546be919
......@@ -35,10 +35,6 @@
#include <platforms/tqm8260.h>
#endif
#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS)
#include <platforms/pq2ads.h>
#endif
#ifdef CONFIG_PCI_8260
#include <syslib/m82xx_pci.h>
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7