Commit 549644b8 authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

ARM: dts: imx23-evk: Convert to the new display bindings

imx23-evk board has a Seiko 43WVF1G parallel display.

Instead of hardcoding the display timings in the device tree, use
the "sii,43wvf1g" compatible instead.

This aligns with the new mxsfb bindings scheme documented at:
Documentation/devicetree/bindings/display/mxsfb.txt
Signed-off-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent cde305e9
...@@ -30,6 +30,26 @@ reg_lcd_3v3: regulator-lcd-3v3 { ...@@ -30,6 +30,26 @@ reg_lcd_3v3: regulator-lcd-3v3 {
enable-active-high; enable-active-high;
}; };
reg_lcd_5v: regulator-lcd-5v {
compatible = "regulator-fixed";
regulator-name = "lcd-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
panel {
compatible = "sii,43wvf1g";
backlight = <&backlight_display>;
dvdd-supply = <&reg_lcd_3v3>;
avdd-supply = <&reg_lcd_5v>;
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
apb@80000000 { apb@80000000 {
apbh@80000000 { apbh@80000000 {
gpmi-nand@8000c000 { gpmi-nand@8000c000 {
...@@ -69,31 +89,11 @@ MX23_PAD_SSP1_DETECT__SSP1_DETECT ...@@ -69,31 +89,11 @@ MX23_PAD_SSP1_DETECT__SSP1_DETECT
lcdif@80030000 { lcdif@80030000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a>; pinctrl-0 = <&lcdif_24bit_pins_a>;
lcd-supply = <&reg_lcd_3v3>;
display = <&display0>;
status = "okay"; status = "okay";
display0: display0 { port {
bits-per-pixel = <32>; display_out: endpoint {
bus-width = <24>; remote-endpoint = <&panel_in>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <9200000>;
hactive = <480>;
vactive = <272>;
hback-porch = <15>;
hfront-porch = <8>;
vback-porch = <12>;
vfront-porch = <4>;
hsync-len = <1>;
vsync-len = <1>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
}; };
}; };
}; };
...@@ -135,7 +135,7 @@ usb0: usb@80080000 { ...@@ -135,7 +135,7 @@ usb0: usb@80080000 {
}; };
}; };
backlight { backlight_display: backlight {
compatible = "pwm-backlight"; compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>; pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>; brightness-levels = <0 4 8 16 32 64 128 255>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment