Commit 549e5495 authored by Sean Wang's avatar Sean Wang Committed by David S. Miller

net: ethernet: mediatek: fix incorrect return value of devm_clk_get with EPROBE_DEFER

1) If the return value of devm_clk_get is EPROBE_DEFER, we should
defer probing the driver. The change is verified and works based
on 4.8-rc1 staying with the latest clk-next code for MT7623.
2) Changing with the usage of loops to work out if all clocks
required are fine
Signed-off-by: default avatarSean Wang <sean.wang@mediatek.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c6f1dc4d
......@@ -50,6 +50,10 @@ static const struct mtk_ethtool_stats {
MTK_ETHTOOL_STAT(rx_flow_control_packets),
};
static const char * const mtk_clks_source_name[] = {
"ethif", "esw", "gp1", "gp2"
};
void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg)
{
__raw_writel(val, eth->base + reg);
......@@ -1814,6 +1818,7 @@ static int mtk_probe(struct platform_device *pdev)
if (!eth)
return -ENOMEM;
eth->dev = &pdev->dev;
eth->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(eth->base))
return PTR_ERR(eth->base);
......@@ -1848,21 +1853,21 @@ static int mtk_probe(struct platform_device *pdev)
return -ENXIO;
}
}
eth->clk_ethif = devm_clk_get(&pdev->dev, "ethif");
eth->clk_esw = devm_clk_get(&pdev->dev, "esw");
eth->clk_gp1 = devm_clk_get(&pdev->dev, "gp1");
eth->clk_gp2 = devm_clk_get(&pdev->dev, "gp2");
if (IS_ERR(eth->clk_esw) || IS_ERR(eth->clk_gp1) ||
IS_ERR(eth->clk_gp2) || IS_ERR(eth->clk_ethif))
for (i = 0; i < ARRAY_SIZE(eth->clks); i++) {
eth->clks[i] = devm_clk_get(eth->dev,
mtk_clks_source_name[i]);
if (IS_ERR(eth->clks[i])) {
if (PTR_ERR(eth->clks[i]) == -EPROBE_DEFER)
return -EPROBE_DEFER;
return -ENODEV;
}
}
clk_prepare_enable(eth->clk_ethif);
clk_prepare_enable(eth->clk_esw);
clk_prepare_enable(eth->clk_gp1);
clk_prepare_enable(eth->clk_gp2);
clk_prepare_enable(eth->clks[MTK_CLK_ETHIF]);
clk_prepare_enable(eth->clks[MTK_CLK_ESW]);
clk_prepare_enable(eth->clks[MTK_CLK_GP1]);
clk_prepare_enable(eth->clks[MTK_CLK_GP2]);
eth->dev = &pdev->dev;
eth->msg_enable = netif_msg_init(mtk_msg_level, MTK_DEFAULT_MSG_ENABLE);
INIT_WORK(&eth->pending_work, mtk_pending_work);
......@@ -1905,10 +1910,10 @@ static int mtk_remove(struct platform_device *pdev)
{
struct mtk_eth *eth = platform_get_drvdata(pdev);
clk_disable_unprepare(eth->clk_ethif);
clk_disable_unprepare(eth->clk_esw);
clk_disable_unprepare(eth->clk_gp1);
clk_disable_unprepare(eth->clk_gp2);
clk_disable_unprepare(eth->clks[MTK_CLK_ETHIF]);
clk_disable_unprepare(eth->clks[MTK_CLK_ESW]);
clk_disable_unprepare(eth->clks[MTK_CLK_GP1]);
clk_disable_unprepare(eth->clks[MTK_CLK_GP2]);
netif_napi_del(&eth->tx_napi);
netif_napi_del(&eth->rx_napi);
......
......@@ -290,6 +290,17 @@ enum mtk_tx_flags {
MTK_TX_FLAGS_PAGE0 = 0x02,
};
/* This enum allows us to identify how the clock is defined on the array of the
* clock in the order
*/
enum mtk_clks_map {
MTK_CLK_ETHIF,
MTK_CLK_ESW,
MTK_CLK_GP1,
MTK_CLK_GP2,
MTK_CLK_MAX
};
/* struct mtk_tx_buf - This struct holds the pointers to the memory pointed at
* by the TX descriptor s
* @skb: The SKB pointer of the packet being sent
......@@ -370,10 +381,7 @@ struct mtk_rx_ring {
* @scratch_ring: Newer SoCs need memory for a second HW managed TX ring
* @phy_scratch_ring: physical address of scratch_ring
* @scratch_head: The scratch memory that scratch_ring points to.
* @clk_ethif: The ethif clock
* @clk_esw: The switch clock
* @clk_gp1: The gmac1 clock
* @clk_gp2: The gmac2 clock
* @clks: clock array for all clocks required
* @mii_bus: If there is a bus we need to create an instance for it
* @pending_work: The workqueue used to reset the dma ring
*/
......@@ -400,10 +408,8 @@ struct mtk_eth {
struct mtk_tx_dma *scratch_ring;
dma_addr_t phy_scratch_ring;
void *scratch_head;
struct clk *clk_ethif;
struct clk *clk_esw;
struct clk *clk_gp1;
struct clk *clk_gp2;
struct clk *clks[MTK_CLK_MAX];
struct mii_bus *mii_bus;
struct work_struct pending_work;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment