[SCSI] hpsa: add task management for ioaccel mode 2

Underlying firmware cannot handle task abort on accelerated path (SSD Smart Path).
Change abort requests for accelerated path commands to physical target reset.
Send reset request on normal IO path.
Signed-off-by: Scott Teel <scott.teel@hp.com>
Signed-off-by: Mike Miller <michael.miller@canonical.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/hpsa.c

@@ -2306,6 +2306,85 @@ static int add_ext_target_dev(struct ctlr_info *h,
 	return 1;
 }
 
+/*
+ * Get address of physical disk used for an ioaccel2 mode command:
+ *	1. Extract ioaccel2 handle from the command.
+ *	2. Find a matching ioaccel2 handle from list of physical disks.
+ *	3. Return:
+ *		1 and set scsi3addr to address of matching physical
+ *		0 if no matching physical disk was found.
+ */
+static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
+	struct CommandList *ioaccel2_cmd_to_abort, unsigned char *scsi3addr)
+{
+	struct ReportExtendedLUNdata *physicals = NULL;
+	int responsesize = 24;	/* size of physical extended response */
+	int extended = 2;	/* flag forces reporting 'other dev info'. */
+	int reportsize = sizeof(*physicals) + HPSA_MAX_PHYS_LUN * responsesize;
+	u32 nphysicals = 0;	/* number of reported physical devs */
+	int found = 0;		/* found match (1) or not (0) */
+	u32 find;		/* handle we need to match */
+	int i;
+	struct scsi_cmnd *scmd;	/* scsi command within request being aborted */
+	struct hpsa_scsi_dev_t *d; /* device of request being aborted */
+	struct io_accel2_cmd *c2a; /* ioaccel2 command to abort */
+	u32 it_nexus;		/* 4 byte device handle for the ioaccel2 cmd */
+	u32 scsi_nexus;		/* 4 byte device handle for the ioaccel2 cmd */
+
+	if (ioaccel2_cmd_to_abort->cmd_type != CMD_IOACCEL2)
+		return 0; /* no match */
+
+	/* point to the ioaccel2 device handle */
+	c2a = &h->ioaccel2_cmd_pool[ioaccel2_cmd_to_abort->cmdindex];
+	if (c2a == NULL)
+		return 0; /* no match */
+
+	scmd = (struct scsi_cmnd *) ioaccel2_cmd_to_abort->scsi_cmd;
+	if (scmd == NULL)
+		return 0; /* no match */
+
+	d = scmd->device->hostdata;
+	if (d == NULL)
+		return 0; /* no match */
+
+	it_nexus = cpu_to_le32((u32) d->ioaccel_handle);
+	scsi_nexus = cpu_to_le32((u32) c2a->scsi_nexus);
+	find = c2a->scsi_nexus;
+
+	/* Get the list of physical devices */
+	physicals = kzalloc(reportsize, GFP_KERNEL);
+	if (hpsa_scsi_do_report_phys_luns(h, (struct ReportLUNdata *) physicals,
+		reportsize, extended)) {
+		dev_err(&h->pdev->dev,
+			"Can't lookup %s device handle: report physical LUNs failed.\n",
+			"HP SSD Smart Path");
+		kfree(physicals);
+		return 0;
+	}
+	nphysicals = be32_to_cpu(*((__be32 *)physicals->LUNListLength)) /
+							responsesize;
+
+
+	/* find ioaccel2 handle in list of physicals: */
+	for (i = 0; i < nphysicals; i++) {
+		/* handle is in bytes 28-31 of each lun */
+		if (memcmp(&((struct ReportExtendedLUNdata *)
+				physicals)->LUN[i][20], &find, 4) != 0) {
+			continue; /* didn't match */
+		}
+		found = 1;
+		memcpy(scsi3addr, &((struct ReportExtendedLUNdata *)
+					physicals)->LUN[i][0], 8);
+		break; /* found it */
+	}
+
+	kfree(physicals);
+	if (found)
+		return 1;
+	else
+		return 0;
+
+}
 /*
  * Do CISS_REPORT_PHYS and CISS_REPORT_LOG.  Data is returned in physdev,
  * logdev.  The number of luns in physdev and logdev are returned in
@@ -3423,12 +3502,20 @@ static void hpsa_get_tag(struct ctlr_info *h,
 			&h->ioaccel_cmd_pool[c->cmdindex];
 		*tagupper = cm1->Tag.upper;
 		*taglower = cm1->Tag.lower;
-	} else {
+		return;
+	}
+	if (c->cmd_type == CMD_IOACCEL2) {
+		struct io_accel2_cmd *cm2 = (struct io_accel2_cmd *)
+			&h->ioaccel2_cmd_pool[c->cmdindex];
+		*tagupper = cm2->Tag.upper;
+		*taglower = cm2->Tag.lower;
+		return;
+	}
 	*tagupper = c->Header.Tag.upper;
 	*taglower = c->Header.Tag.lower;
-	}
 }
 
+
 static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
 	struct CommandList *abort, int swizzle)
 {
@@ -3524,6 +3611,71 @@ static struct CommandList *hpsa_find_cmd_in_queue_by_tag(struct ctlr_info *h,
 	return NULL;
 }
 
+/* ioaccel2 path firmware cannot handle abort task requests.
+ * Change abort requests to physical target reset, and send to the
+ * address of the physical disk used for the ioaccel 2 command.
+ * Return 0 on success (IO_OK)
+ *	 -1 on failure
+ */
+
+static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
+	unsigned char *scsi3addr, struct CommandList *abort)
+{
+	int rc = IO_OK;
+	struct scsi_cmnd *scmd; /* scsi command within request being aborted */
+	struct hpsa_scsi_dev_t *dev; /* device to which scsi cmd was sent */
+	unsigned char phys_scsi3addr[8]; /* addr of phys disk with volume */
+	unsigned char *psa = &phys_scsi3addr[0];
+
+	/* Get a pointer to the hpsa logical device. */
+	scmd = (struct scsi_cmnd *) abort->scsi_cmd;
+	dev = (struct hpsa_scsi_dev_t *)(scmd->device->hostdata);
+	if (dev == NULL) {
+		dev_warn(&h->pdev->dev,
+			"Cannot abort: no device pointer for command.\n");
+			return -1; /* not abortable */
+	}
+
+	if (!dev->offload_enabled) {
+		dev_warn(&h->pdev->dev,
+			"Can't abort: device is not operating in HP SSD Smart Path mode.\n");
+		return -1; /* not abortable */
+	}
+
+	/* Incoming scsi3addr is logical addr. We need physical disk addr. */
+	if (!hpsa_get_pdisk_of_ioaccel2(h, abort, psa)) {
+		dev_warn(&h->pdev->dev, "Can't abort: Failed lookup of physical address.\n");
+		return -1; /* not abortable */
+	}
+
+	/* send the reset */
+	rc = hpsa_send_reset(h, psa, HPSA_RESET_TYPE_TARGET);
+	if (rc != 0) {
+		dev_warn(&h->pdev->dev,
+			"Reset as abort: Failed on physical device at scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+			psa[0], psa[1], psa[2], psa[3],
+			psa[4], psa[5], psa[6], psa[7]);
+		return rc; /* failed to reset */
+	}
+
+	/* wait for device to recover */
+	if (wait_for_device_to_become_ready(h, psa) != 0) {
+		dev_warn(&h->pdev->dev,
+			"Reset as abort: Failed: Device never recovered from reset: 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+			psa[0], psa[1], psa[2], psa[3],
+			psa[4], psa[5], psa[6], psa[7]);
+		return -1;  /* failed to recover */
+	}
+
+	/* device recovered */
+	dev_info(&h->pdev->dev,
+		"Reset as abort: Device recovered from reset: scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+		psa[0], psa[1], psa[2], psa[3],
+		psa[4], psa[5], psa[6], psa[7]);
+
+	return rc; /* success */
+}
+
 /* Some Smart Arrays need the abort tag swizzled, and some don't.  It's hard to
  * tell which kind we're dealing with, so we send the abort both ways.  There
  * shouldn't be any collisions between swizzled and unswizzled tags due to the
@@ -3537,6 +3689,14 @@ static int hpsa_send_abort_both_ways(struct ctlr_info *h,
 	struct CommandList *c;
 	int rc = 0, rc2 = 0;
 
+	/* ioccelerator mode 2 commands should be aborted via the
+	 * accelerated path, since RAID path is unaware of these commands,
+	 * but underlying firmware can't handle abort TMF.
+	 * Change abort to physical device reset.
+	 */
+	if (abort->cmd_type == CMD_IOACCEL2)
+		return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr, abort);
+
 	/* we do not expect to find the swizzled tag in our queue, but
 	 * check anyway just to be sure the assumptions which make this
 	 * the case haven't become wrong.

drivers/scsi/hpsa_cmd.h

@@ -84,6 +84,7 @@
 /* cdb type */
 #define TYPE_CMD		0x00
 #define TYPE_MSG		0x01
+#define TYPE_IOACCEL2_CMD	0x81 /* 0x81 is not used by hardware */
 
 /* Message Types  */
 #define HPSA_TASK_MANAGEMENT    0x00
@@ -525,7 +526,7 @@ struct io_accel2_cmd {
  * FIXME: this can't be all I need mfm
  */
 #define IOACCEL2_IU_TYPE	0x40
-#define IU_TYPE_TMF		0x41
+#define IOACCEL2_IU_TMF_TYPE	0x41
 #define IOACCEL2_DIR_NO_DATA	0x00
 #define IOACCEL2_DIR_DATA_IN	0x01
 #define IOACCEL2_DIR_DATA_OUT	0x02