Merge tag 'phy-for-5.11' of...

Merge tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.11 - New phy drivers: - Mediatek MT7621 PCIe PHY (promoted from staging) - Ingenic USB phy driver supporting JZ4775 and X2000 - Intel Keem Bay USB PHY driver - Marvell USB HSIC PHY driver supporting MMP3 SoC - AXG MIPI D-PHY driver - Updates: - Conversion to YAML binding for: - Broadcom SATA PHY - Cadence Sierra PHY bindings - STM32 USBC Phy - Support for Exynos5433 PCIe PHY - Support for Qualcomm SM8250 PCIe QMP PHY - Support for Exynos5420 USB2 phy - devm_platform_ioremap_resource conversion for bunch of drivers * tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) drm/mediatek: avoid dereferencing a null hdmi_phy on an error message phy: ingenic: depend on HAS_IOMEM phy: mediatek: statify mtk_hdmi_phy_driver dt-bindings: phy: Convert Broadcom SATA PHY to YAML devicetree: phy: rockchip-emmc add output-tapdelay-select phy: rockchip-emmc: output tap delay dt property PHY: Ingenic: Add USB PHY driver using generic PHY framework. dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000. USB: PHY: JZ4770: Remove unnecessary function calls. devicetree: phy: rockchip-emmc: pulldown property phy: rockchip: set pulldown for strobe line in dts phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failure phy: mediatek: allow compile-testing the hdmi phy phy/rockchip: Make PHY_ROCKCHIP_INNO_HDMI depend on HAS_IOMEM to fix build error phy: samsung: Merge Kconfig for Exynos5420 and Exynos5250 phy: ralink: phy-mt7621-pci: set correct name in MODULE_DEVICE_TABLE macro phy: ralink: phy-mt7621-pci: drop 'COMPILE_TEST' from Kconfig phy: mediatek: Make PHY_MTK_{XSPHY, TPHY} depend on HAS_IOMEM and OF_ADDRESS to fix build errors phy: tegra: xusb: Fix usb_phy device driver field phy: amlogic: replace devm_reset_control_array_get() ...

Merge tag 'phy-for-5.11' of...
Merge tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.11 - New phy drivers: - Mediatek MT7621 PCIe PHY (promoted from staging) - Ingenic USB phy driver supporting JZ4775 and X2000 - Intel Keem Bay USB PHY driver - Marvell USB HSIC PHY driver supporting MMP3 SoC - AXG MIPI D-PHY driver - Updates: - Conversion to YAML binding for: - Broadcom SATA PHY - Cadence Sierra PHY bindings - STM32 USBC Phy - Support for Exynos5433 PCIe PHY - Support for Qualcomm SM8250 PCIe QMP PHY - Support for Exynos5420 USB2 phy - devm_platform_ioremap_resource conversion for bunch of drivers * tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) drm/mediatek: avoid dereferencing a null hdmi_phy on an error message phy: ingenic: depend on HAS_IOMEM phy: mediatek: statify mtk_hdmi_phy_driver dt-bindings: phy: Convert Broadcom SATA PHY to YAML devicetree: phy: rockchip-emmc add output-tapdelay-select phy: rockchip-emmc: output tap delay dt property PHY: Ingenic: Add USB PHY driver using generic PHY framework. dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000. USB: PHY: JZ4770: Remove unnecessary function calls. devicetree: phy: rockchip-emmc: pulldown property phy: rockchip: set pulldown for strobe line in dts phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failure phy: mediatek: allow compile-testing the hdmi phy phy/rockchip: Make PHY_ROCKCHIP_INNO_HDMI depend on HAS_IOMEM to fix build error phy: samsung: Merge Kconfig for Exynos5420 and Exynos5250 phy: ralink: phy-mt7621-pci: set correct name in MODULE_DEVICE_TABLE macro phy: ralink: phy-mt7621-pci: drop 'COMPILE_TEST' from Kconfig phy: mediatek: Make PHY_MTK_{XSPHY, TPHY} depend on HAS_IOMEM and OF_ADDRESS to fix build errors phy: tegra: xusb: Fix usb_phy device driver field phy: amlogic: replace devm_reset_control_array_get() ...
54bf54c8 · Greg Kroah-Hartman · e7255092 · b097efba · 54bf54c8 · 54bf54c8
Commit 54bf54c8 authored Dec 09, 2020 by Greg Kroah-Hartman
100 changed files
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
@@ -92,7 +92,7 @@ required:

 patternProperties:
  "^usb-phy@[a-f0-9]+$":
-    allOf: [ $ref: "../usb/ingenic,jz4770-phy.yaml#" ]
+    allOf: [ $ref: "../phy/ingenic,phy-usb.yaml#" ]

 additionalProperties: false


--- a/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,axg-mipi-dphy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic AXG MIPI D-PHY
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,axg-mipi-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: phy
+
+  "#phy-cells":
+    const: 0
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: analog
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@ff640000 {
+            compatible = "amlogic,axg-mipi-dphy";
+            reg = <0xff640000 0x100>;
+            clocks = <&clk_mipi_dsi_phy>;
+            clock-names = "pclk";
+            resets = <&reset_phy>;
+            reset-names = "phy";
+            phys = <&mipi_pcie_analog_dphy>;
+            phy-names = "analog";
+            #phy-cells = <0>;
+    };
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
@@ -9,27 +9,32 @@ title: Amlogic AXG shared MIPI/PCIE analog PHY
 maintainers:
  - Remi Pommarel <repk@triplefau.lt>

+description: |+
+  The Everything-Else Power Domains node should be the child of a syscon
+  node with the required property:
+
+  - compatible: Should be the following:
+                "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
+
+  Refer to the the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
 properties:
  compatible:
    const: amlogic,axg-mipi-pcie-analog-phy

-  reg:
-    maxItems: 1
-
  "#phy-cells":
-    const: 1
+    const: 0

 required:
  - compatible
-  - reg
  - "#phy-cells"

 additionalProperties: false

 examples:
  - |
-    mpphy: phy@0 {
+    mpphy: phy {
          compatible = "amlogic,axg-mipi-pcie-analog-phy";
-          reg = <0x0 0xc>;
-          #phy-cells = <1>;
+          #phy-cells = <0>;
    };
--- a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/brcm,sata-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Broadcom SATA3 PHY
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "^sata[-|_]phy(@.*)?$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-sata-phy
+              - brcm,bcm7425-sata-phy
+              - brcm,bcm7445-sata-phy
+              - brcm,bcm63138-sata-phy
+          - const: brcm,phy-sata3
+      - items:
+          - const: brcm,iproc-nsp-sata-phy
+      - items:
+          - const: brcm,iproc-ns2-sata-phy
+      - items:
+          - const: brcm,iproc-sr-sata-phy
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: phy
+      - const: phy-ctrl
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^sata-phy@[0-9]+$":
+    type: object
+    description: |
+      Each port's PHY should be represented as a sub-node.
+
+    properties:
+      reg:
+        description: The SATA PHY port number
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+      "brcm,enable-ssc":
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: |
+          Use spread spectrum clocking (SSC) on this port
+          This property is not applicable for "brcm,iproc-ns2-sata-phy",
+          "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
+
+      "brcm,rxaeq-mode":
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          String that indicates the desired RX equalizer mode.
+        enum:
+          - off
+          - auto
+          - manual
+
+      "brcm,rxaeq-value":
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            When 'brcm,rxaeq-mode' is set to "manual", provides the RX
+            equalizer value that should be used.
+        minimum: 0
+        maximum: 63
+
+      "brcm,tx-amplitude-millivolt":
+        description: |
+            Transmit amplitude voltage in millivolt.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [400, 500, 600, 800]
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      items:
+        const: brcm,iproc-ns2-sata-phy
+then:
+  properties:
+    reg:
+      maxItems: 2
+    reg-names:
+      items:
+        - const: "phy"
+        - const: "phy-ctrl"
+else:
+  properties:
+    reg:
+      maxItems: 1
+    reg-names:
+      maxItems: 1
+      items:
+        - const: "phy"
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    sata_phy@f0458100 {
+        compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+        reg = <0xf0458100 0x1e00>;
+        reg-names = "phy";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sata-phy@0 {
+                reg = <0>;
+                #phy-cells = <0>;
+        };
+
+        sata-phy@1 {
+                reg = <1>;
+                #phy-cells = <0>;
+        };
+    };
--- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
-* Broadcom SATA3 PHY
-
-Required properties:
- compatible: should be one or more of
-     "brcm,bcm7216-sata-phy"
-     "brcm,bcm7425-sata-phy"
-     "brcm,bcm7445-sata-phy"
-     "brcm,iproc-ns2-sata-phy"
-     "brcm,iproc-nsp-sata-phy"
-     "brcm,phy-sata3"
-     "brcm,iproc-sr-sata-phy"
-     "brcm,bcm63138-sata-phy"
- address-cells: should be 1
- size-cells: should be 0
- reg: register ranges for the PHY PCB interface
- reg-names: should be "phy" and "phy-ctrl"
-     The "phy-ctrl" registers are only required for
-     "brcm,iproc-ns2-sata-phy" and "brcm,iproc-sr-sata-phy".
-
-Sub-nodes:
-  Each port's PHY should be represented as a sub-node.
-
-Sub-nodes required properties:
- reg: the PHY number
- phy-cells: generic PHY binding; must be 0
-
-Sub-nodes optional properties:
- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
-     This property is not applicable for "brcm,iproc-ns2-sata-phy",
-     "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
-
- brcm,rxaeq-mode: string that indicates the desired RX equalizer
-  mode, possible values are:
-	"off" (equivalent to not specifying the property)
-	"auto"
-	"manual" (brcm,rxaeq-value is used in that case)
-
- brcm,rxaeq-value: when 'rxaeq-mode' is set to "manual", provides the RX
-  equalizer value that should be used. Allowed range is 0..63.
-
-Example
-	sata-phy@f0458100 {
-		compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
-		reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
-		reg-names = "phy";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata-phy@0 {
-			reg = <0>;
-			#phy-cells = <0>;
-		};
-
-		sata-phy@1 {
-			reg = <1>;
-			#phy-cells = <0>;
-		};
-	};
--- a/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml
+++ b/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/usb/ingenic,jz4770-phy.yaml#
+$id: http://devicetree.org/schemas/phy/ingenic,phy-usb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#

 title: Ingenic SoCs USB PHY devicetree bindings
@@ -17,9 +17,11 @@ properties:
  compatible:
    enum:
      - ingenic,jz4770-phy
+      - ingenic,jz4775-phy
      - ingenic,jz4780-phy
      - ingenic,x1000-phy
      - ingenic,x1830-phy
+      - ingenic,x2000-phy

  reg:
    maxItems: 1

--- a/Documentation/devicetree/bindings/phy/intel,phy-keembay-usb.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,phy-keembay-usb.yaml
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,phy-keembay-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay USB PHY bindings
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-usb-phy
+
+  reg:
+    items:
+      - description: USB APB CPR (clock, power, reset) register
+      - description: USB APB slave register
+
+  reg-names:
+    items:
+      - const: cpr-apb-base
+      - const: slv-apb-base
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@20400000 {
+          compatible = "intel,keembay-usb-phy";
+          reg = <0x20400000 0x1c>,
+                <0x20480000 0xd0>;
+          reg-names = "cpr-apb-base", "slv-apb-base";
+          #phy-cells = <0>;
+    };
--- a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
-# SPDX-License-Identifier: GPL-2.0-or-later
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
 # Copyright 2019 Lubomir Rintel <lkundrak@v3.sk>
 %YAML 1.2
 ---
@@ -18,27 +18,20 @@ properties:
    maxItems: 1
    description: base address of the device

-  reset-gpios:
-    maxItems: 1
-    description: GPIO connected to reset
-
  "#phy-cells":
    const: 0

 required:
  - compatible
  - reg
-  - reset-gpios
  - "#phy-cells"

 additionalProperties: false

 examples:
  - |
-    #include <dt-bindings/gpio/gpio.h>
    hsic-phy@f0001800 {
            compatible = "marvell,mmp3-hsic-phy";
            reg = <0xf0001800 0x40>;
-            reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
            #phy-cells = <0>;
    };
--- a/drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.yaml
+++ b/drivers/staging/mt7621-pci-phy/mediatek,mt7621-pci-phy.yaml
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
 %YAML 1.2
 ---
 $id: "http://devicetree.org/schemas/phy/mediatek,mt7621-pci-phy.yaml#"

--- a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
-Cadence Sierra PHY
-----------------------
-
-Required properties:
- compatible:	Must be "cdns,sierra-phy-t0" for Sierra in Cadence platform
-		Must be "ti,sierra-phy-t0" for Sierra in TI's J721E SoC.
- resets:	Must contain an entry for each in reset-names.
-		See ../reset/reset.txt for details.
- reset-names:	Must include "sierra_reset" and "sierra_apb".
-		"sierra_reset" must control the reset line to the PHY.
-		"sierra_apb" must control the reset line to the APB PHY
-		interface ("sierra_apb" is optional).
- reg:		register range for the PHY.
- #address-cells: Must be 1
- #size-cells:	Must be 0
-
-Optional properties:
- clocks:		Must contain an entry in clock-names.
-			See ../clocks/clock-bindings.txt for details.
- clock-names:		Must contain "cmn_refclk_dig_div" and
-			"cmn_refclk1_dig_div" for configuring the frequency of
-			the clock to the lanes. "phy_clk" is deprecated.
- cdns,autoconf:	A boolean property whose presence indicates that the
-			PHY registers will be configured by hardware. If not
-			present, all sub-node optional properties must be
-			provided.
-
-Sub-nodes:
-  Each group of PHY lanes with a single master lane should be represented as
-  a sub-node. Note that the actual configuration of each lane is determined by
-  hardware strapping, and must match the configuration specified here.
-
-Sub-node required properties:
- #phy-cells:	Generic PHY binding; must be 0.
- reg:		The master lane number.  This is the lowest numbered lane
-		in the lane group.
- resets:	Must contain one entry which controls the reset line for the
-		master lane of the sub-node.
-		See ../reset/reset.txt for details.
-
-Sub-node optional properties:
- cdns,num-lanes:	Number of lanes in this group.  From 1 to 4.  The
-			group is made up of consecutive lanes.
- cdns,phy-type:	Can be PHY_TYPE_PCIE or PHY_TYPE_USB3, depending on
-			configuration of lanes.
-
-Example:
-	pcie_phy4: pcie-phy@fd240000 {
-		compatible = "cdns,sierra-phy-t0";
-		reg = <0x0 0xfd240000 0x0 0x40000>;
-		resets = <&phyrst 0>, <&phyrst 1>;
-		reset-names = "sierra_reset", "sierra_apb";
-		clocks = <&phyclock>;
-		clock-names = "phy_clk";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pcie0_phy0: pcie-phy@0 {
-				reg = <0>;
-				resets = <&phyrst 2>;
-				cdns,num-lanes = <2>;
-				#phy-cells = <0>;
-				cdns,phy-type = <PHY_TYPE_PCIE>;
-		};
-		pcie0_phy1: pcie-phy@2 {
-				reg = <2>;
-				resets = <&phyrst 4>;
-				cdns,num-lanes = <1>;
-				#phy-cells = <0>;
-				cdns,phy-type = <PHY_TYPE_PCIE>;
-		};
--- a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/phy-cadence-sierra.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence Sierra PHY binding
+
+description:
+  This binding describes the Cadence Sierra PHY. Sierra PHY supports multilink
+  multiprotocol combinations including protocols such as PCIe, USB etc.
+
+maintainers:
+  - Swapnil Jakhade <sjakhade@cadence.com>
+  - Yuti Amonkar <yamonkar@cadence.com>
+
+properties:
+  compatible:
+    enum:
+      - cdns,sierra-phy-t0
+      - ti,sierra-phy-t0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Sierra PHY reset.
+      - description: Sierra APB reset. This is optional.
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: sierra_reset
+      - const: sierra_apb
+
+  reg:
+    maxItems: 1
+    description:
+      Offset of the Sierra PHY configuration registers.
+
+  reg-names:
+    const: serdes
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: cmn_refclk_dig_div
+      - const: cmn_refclk1_dig_div
+
+  cdns,autoconf:
+    type: boolean
+    description:
+      A boolean property whose presence indicates that the PHY registers will be
+      configured by hardware. If not present, all sub-node optional properties
+      must be provided.
+
+patternProperties:
+  '^phy@[0-9a-f]$':
+    type: object
+    description:
+      Each group of PHY lanes with a single master lane should be represented as
+      a sub-node. Note that the actual configuration of each lane is determined
+      by hardware strapping, and must match the configuration specified here.
+    properties:
+      reg:
+        description:
+          The master lane number. This is the lowest numbered lane in the lane group.
+        minimum: 0
+        maximum: 15
+
+      resets:
+        minItems: 1
+        maxItems: 4
+        description:
+          Contains list of resets, one per lane, to get all the link lanes out of reset.
+
+      "#phy-cells":
+        const: 0
+
+      cdns,phy-type:
+        description:
+          Specifies the type of PHY for which the group of PHY lanes is used.
+          Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [2, 4]
+
+      cdns,num-lanes:
+        description:
+          Number of lanes in this group. The group is made up of consecutive lanes.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 16
+
+    required:
+      - reg
+      - resets
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sierra-phy@fd240000 {
+            compatible = "cdns,sierra-phy-t0";
+            reg = <0x0 0xfd240000 0x0 0x40000>;
+            resets = <&phyrst 0>, <&phyrst 1>;
+            reset-names = "sierra_reset", "sierra_apb";
+            clocks = <&cmn_refclk_dig_div>, <&cmn_refclk1_dig_div>;
+            clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            pcie0_phy0: phy@0 {
+                reg = <0>;
+                resets = <&phyrst 2>;
+                cdns,num-lanes = <2>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_PCIE>;
+            };
+            pcie0_phy1: phy@2 {
+                reg = <2>;
+                resets = <&phyrst 4>;
+                cdns,num-lanes = <1>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_PCIE>;
+            };
+        };
+    };
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
-STMicroelectronics STM32 USB HS PHY controller
-
-The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
-switch. It controls PHY configuration and status, and the UTMI+ switch that
-selects either OTG or HOST controller for the second PHY port. It also sets
-PLL configuration.
-
-USBPHYC
-      |_ PLL
-      |
-      |_ PHY port#1 _________________ HOST controller
-      |                    _                 |
-      |                  / 1|________________|
-      |_ PHY port#2 ----|   |________________
-      |                  \_0|                |
-      |_ UTMI switch_______|          OTG controller
-
-
-Phy provider node
-=================
-
-Required properties:
- compatible: must be "st,stm32mp1-usbphyc"
- reg: address and length of the usb phy control register set
- clocks: phandle + clock specifier for the PLL phy clock
- #address-cells: number of address cells for phys sub-nodes, must be <1>
- #size-cells: number of size cells for phys sub-nodes, must be <0>
-
-Optional properties:
- assigned-clocks: phandle + clock specifier for the PLL phy clock
- assigned-clock-parents: the PLL phy clock parent
- resets: phandle + reset specifier
-
-Required nodes: one sub-node per port the controller provides.
-
-Phy sub-nodes
-==============
-
-Required properties:
- reg: phy port index
- phy-supply: phandle to the regulator providing 3V3 power to the PHY,
-	      see phy-bindings.txt in the same directory.
- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY
- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
- #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY
-  port#1 and must be <1> for PHY port#2, to select USB controller
-
-
-Example:
-		usbphyc: usb-phy@5a006000 {
-			compatible = "st,stm32mp1-usbphyc";
-			reg = <0x5a006000 0x1000>;
-			clocks = <&rcc_clk USBPHY_K>;
-			resets = <&rcc_rst USBPHY_R>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			usbphyc_port0: usb-phy@0 {
-				reg = <0>;
-				phy-supply = <&vdd_usb>;
-				vdda1v1-supply = <&reg11>;
-				vdda1v8-supply = <&reg18>
-				#phy-cells = <0>;
-			};
-
-			usbphyc_port1: usb-phy@1 {
-				reg = <1>;
-				phy-supply = <&vdd_usb>;
-				vdda1v1-supply = <&reg11>;
-				vdda1v8-supply = <&reg18>
-				#phy-cells = <1>;
-			};
-		};
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-stm32-usbphyc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 USB HS PHY controller binding
+
+description:
+
+  The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
+  switch. It controls PHY configuration and status, and the UTMI+ switch that
+  selects either OTG or HOST controller for the second PHY port. It also sets
+  PLL configuration.
+
+  USBPHYC
+  |_ PLL
+  |
+  |_ PHY port#1 _________________ HOST controller
+  |                   __                 |
+  |                  / 1|________________|
+  |_ PHY port#2 ----|   |________________
+  |                  \_0|                |
+  |_ UTMI switch_______|          OTG controller
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp1-usbphyc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+#Required child nodes:
+
+patternProperties:
+  "^usb-phy@[0|1]$":
+    type: object
+    description:
+      Each port the controller provides must be represented as a sub-node.
+
+    properties:
+      reg:
+        description: phy port index.
+        maxItems: 1
+
+      phy-supply:
+        description: regulator providing 3V3 power supply to the PHY.
+
+      vdda1v1-supply:
+        description: regulator providing 1V1 power supply to the PLL block
+
+      vdda1v8-supply:
+        description: regulator providing 1V8 power supply to the PLL block
+
+      "#phy-cells":
+        enum: [ 0x0, 0x1 ]
+
+    allOf:
+      - if:
+          properties:
+            reg:
+              const: 0
+        then:
+          properties:
+            "#phy-cells":
+              const: 0
+        else:
+          properties:
+            "#phy-cells":
+              const: 1
+              description:
+                The value is used to select UTMI switch output.
+                0 for OTG controller and 1 for Host controller.
+
+    required:
+      - reg
+      - phy-supply
+      - vdda1v1-supply
+      - vdda1v8-supply
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - usb-phy@0
+  - usb-phy@1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    usbphyc: usbphyc@5a006000 {
+        compatible = "st,stm32mp1-usbphyc";
+        reg = <0x5a006000 0x1000>;
+        clocks = <&rcc USBPHY_K>;
+        resets = <&rcc USBPHY_R>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usbphyc_port0: usb-phy@0 {
+            reg = <0>;
+            phy-supply = <&vdd_usb>;
+            vdda1v1-supply = <&reg11>;
+            vdda1v8-supply = <&reg18>;
+            #phy-cells = <0>;
+        };
+
+        usbphyc_port1: usb-phy@1 {
+            reg = <1>;
+            phy-supply = <&vdd_usb>;
+            vdda1v1-supply = <&reg11>;
+            vdda1v8-supply = <&reg18>;
+            #phy-cells = <1>;
+        };
+    };
+...
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -31,6 +31,9 @@ properties:
      - qcom,sdm845-qmp-usb3-uni-phy
      - qcom,sm8150-qmp-ufs-phy
      - qcom,sm8250-qmp-ufs-phy
+      - qcom,sm8250-qmp-gen3x1-pcie-phy
+      - qcom,sm8250-qmp-gen3x2-pcie-phy
+      - qcom,sm8250-qmp-modem-pcie-phy

  reg:
    items:
@@ -259,6 +262,9 @@ allOf:
            enum:
              - qcom,sdm845-qhp-pcie-phy
              - qcom,sdm845-qmp-pcie-phy
+              - qcom,sm8250-qmp-gen3x1-pcie-phy
+              - qcom,sm8250-qmp-gen3x2-pcie-phy
+              - qcom,sm8250-qmp-modem-pcie-phy
    then:
      properties:
        clocks:

--- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
@@ -16,6 +16,11 @@ Optional properties:
 - drive-impedance-ohm: Specifies the drive impedance in Ohm.
                        Possible values are 33, 40, 50, 66 and 100.
                        If not set, the default value of 50 will be applied.
+ - enable-strobe-pulldown: Enable internal pull-down for the strobe line.
+                           If not set, pull-down is not used.
+ - output-tapdelay-select: Specifies the phyctrl_otapdlysec register.
+                           If not set, the register defaults to 0x4.
+                           Maximum value 0xf.

 Example:


--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -47,6 +47,7 @@ Required properties:
 	- "samsung,exynos4210-usb2-phy"
 	- "samsung,exynos4x12-usb2-phy"
 	- "samsung,exynos5250-usb2-phy"
+	- "samsung,exynos5420-usb2-phy"
 	- "samsung,s5pv210-usb2-phy"
 - reg : a list of registers used by phy driver
 	- first and obligatory is the location of phy modules registers

--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11082,6 +11082,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
 F:	drivers/i2c/busses/i2c-mt7621.c

+MEDIATEK MT7621 PHY PCI DRIVER
+M:	Sergio Paracuellos <sergio.paracuellos@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml
+F:	drivers/phy/ralink/phy-mt7621-pci.c
+
 MEDIATEK NAND CONTROLLER DRIVER
 L:	linux-mtd@lists.infradead.org
 S:	Orphan
@@ -14521,6 +14527,14 @@ F:	Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
 F:	drivers/mailbox/qcom-ipcc.c
 F:	include/dt-bindings/mailbox/qcom-ipcc.h

+QUALCOMM IPQ4019 USB PHY DRIVER
+M:	Robert Marko <robert.marko@sartura.hr>
+M:	Luka Perkov <luka.perkov@sartura.hr>
+L:	linux-arm-msm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml
+F:	drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
+
 QUALCOMM IPQ4019 VQMMC REGULATOR DRIVER
 M:	Robert Marko <robert.marko@sartura.hr>
 M:	Luka Perkov <luka.perkov@sartura.hr>

--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -66,6 +66,7 @@ source "drivers/phy/broadcom/Kconfig"
 source "drivers/phy/cadence/Kconfig"
 source "drivers/phy/freescale/Kconfig"
 source "drivers/phy/hisilicon/Kconfig"
+source "drivers/phy/ingenic/Kconfig"
 source "drivers/phy/lantiq/Kconfig"
 source "drivers/phy/marvell/Kconfig"
 source "drivers/phy/mediatek/Kconfig"

--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -15,6 +15,7 @@ obj-y					+= allwinner/	\
 					   cadence/	\
 					   freescale/	\
 					   hisilicon/	\
+					   ingenic/	\
 					   intel/	\
 					   lantiq/	\
 					   marvell/	\

--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -686,7 +686,6 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 	struct phy_provider *phy_provider;
-	struct resource *res;
 	int i, ret;

 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
@@ -700,8 +699,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	if (!data->cfg)
 		return -EINVAL;

-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
-	data->base = devm_ioremap_resource(dev, res);
+	data->base = devm_platform_ioremap_resource_byname(pdev, "phy_ctrl");
 	if (IS_ERR(data->base))
 		return PTR_ERR(data->base);

@@ -796,9 +794,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)

 		if (i || data->cfg->phy0_dual_route) { /* No pmu for musb */
 			snprintf(name, sizeof(name), "pmu%d", i);
-			res = platform_get_resource_byname(pdev,
-							IORESOURCE_MEM, name);
-			phy->pmu = devm_ioremap_resource(dev, res);
+			phy->pmu = devm_platform_ioremap_resource_byname(pdev, name);
 			if (IS_ERR(phy->pmu))
 				return PTR_ERR(phy->pmu);
 		}
@@ -969,7 +965,6 @@ static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A33,
 	.dedicated_clocks = true,
-	.enable_pmu_unk1 = true,
 	.phy0_dual_route = true,
 	.missing_phys = BIT(1) | BIT(2),
 };

--- a/drivers/phy/allwinner/phy-sun50i-usb3.c
+++ b/drivers/phy/allwinner/phy-sun50i-usb3.c
@@ -134,7 +134,6 @@ static int sun50i_usb3_phy_probe(struct platform_device *pdev)
 	struct sun50i_usb3_phy *phy;
 	struct device *dev = &pdev->dev;
 	struct phy_provider *phy_provider;
-	struct resource *res;

 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy)
@@ -153,8 +152,7 @@ static int sun50i_usb3_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(phy->reset);
 	}

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	phy->regs = devm_ioremap_resource(dev, res);
+	phy->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(phy->regs))
 		return PTR_ERR(phy->regs);


--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -253,15 +253,13 @@ static int sun6i_dphy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
 	struct sun6i_dphy *dphy;
-	struct resource *res;
 	void __iomem *regs;

 	dphy = devm_kzalloc(&pdev->dev, sizeof(*dphy), GFP_KERNEL);
 	if (!dphy)
 		return -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	regs = devm_ioremap_resource(&pdev->dev, res);
+	regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(regs)) {
 		dev_err(&pdev->dev, "Couldn't map the DPHY encoder registers\n");
 		return PTR_ERR(regs);

--- a/drivers/phy/allwinner/phy-sun9i-usb.c
+++ b/drivers/phy/allwinner/phy-sun9i-usb.c
@@ -117,7 +117,6 @@ static int sun9i_usb_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 	struct phy_provider *phy_provider;
-	struct resource *res;

 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy)
@@ -156,8 +155,7 @@ static int sun9i_usb_phy_probe(struct platform_device *pdev)
 		}
 	}

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	phy->pmu = devm_ioremap_resource(dev, res);
+	phy->pmu = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(phy->pmu))
 		return PTR_ERR(phy->pmu);


--- a/drivers/phy/amlogic/Kconfig
+++ b/drivers/phy/amlogic/Kconfig
@@ -66,7 +66,20 @@ config PHY_MESON_AXG_MIPI_PCIE_ANALOG
 	depends on OF && (ARCH_MESON || COMPILE_TEST)
 	select GENERIC_PHY
 	select REGMAP_MMIO
+	select GENERIC_PHY_MIPI_DPHY
 	help
 	  Enable this to support the Meson MIPI + PCIE analog PHY
 	  found in Meson AXG SoCs.
 	  If unsure, say N.
+
+config PHY_MESON_AXG_MIPI_DPHY
+	tristate "Meson AXG MIPI DPHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	select GENERIC_PHY_MIPI_DPHY
+	help
+	  Enable this to support the Meson MIPI DPHY found in Meson AXG
+	  SoCs.
+	  If unsure, say N.
--- a/drivers/phy/amlogic/Makefile
+++ b/drivers/phy/amlogic/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_PHY_MESON_G12A_USB2)		+= phy-meson-g12a-usb2.o
 obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE)		+= phy-meson-g12a-usb3-pcie.o
 obj-$(CONFIG_PHY_MESON_AXG_PCIE)		+= phy-meson-axg-pcie.o
 obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG)	+= phy-meson-axg-mipi-pcie-analog.o
+obj-$(CONFIG_PHY_MESON_AXG_MIPI_DPHY)		+= phy-meson-axg-mipi-dphy.o
--- a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
--- a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
@@ -4,9 +4,13 @@
 *
 * Copyright (C) 2019 Remi Pommarel <repk@triplefau.lt>
 */
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
 #include <linux/module.h>
 #include <linux/phy/phy.h>
 #include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
 #include <dt-bindings/phy/phy.h>

@@ -14,10 +18,10 @@
 #define		HHI_MIPI_CNTL0_COMMON_BLOCK	GENMASK(31, 28)
 #define		HHI_MIPI_CNTL0_ENABLE		BIT(29)
 #define		HHI_MIPI_CNTL0_BANDGAP		BIT(26)
-#define		HHI_MIPI_CNTL0_DECODE_TO_RTERM	GENMASK(15, 12)
-#define		HHI_MIPI_CNTL0_OUTPUT_EN	BIT(3)
+#define		HHI_MIPI_CNTL0_DIF_REF_CTL1	GENMASK(25, 16)
+#define		HHI_MIPI_CNTL0_DIF_REF_CTL0	GENMASK(15, 0)

-#define HHI_MIPI_CNTL1 0x01
+#define HHI_MIPI_CNTL1 0x04
 #define		HHI_MIPI_CNTL1_CH0_CML_PDR_EN	BIT(12)
 #define		HHI_MIPI_CNTL1_LP_ABILITY	GENMASK(5, 4)
 #define		HHI_MIPI_CNTL1_LP_RESISTER	BIT(3)
@@ -25,100 +29,169 @@
 #define		HHI_MIPI_CNTL1_INPUT_SEL	BIT(1)
 #define		HHI_MIPI_CNTL1_PRBS7_EN		BIT(0)

-#define HHI_MIPI_CNTL2 0x02
+#define HHI_MIPI_CNTL2 0x08
 #define		HHI_MIPI_CNTL2_CH_PU		GENMASK(31, 25)
 #define		HHI_MIPI_CNTL2_CH_CTL		GENMASK(24, 19)
 #define		HHI_MIPI_CNTL2_CH0_DIGDR_EN	BIT(18)
 #define		HHI_MIPI_CNTL2_CH_DIGDR_EN	BIT(17)
 #define		HHI_MIPI_CNTL2_LPULPS_EN	BIT(16)
-#define		HHI_MIPI_CNTL2_CH_EN(n)		BIT(15 - (n))
+#define		HHI_MIPI_CNTL2_CH_EN		GENMASK(15, 11)
 #define		HHI_MIPI_CNTL2_CH0_LP_CTL	GENMASK(10, 1)

+#define DSI_LANE_0              BIT(4)
+#define DSI_LANE_1              BIT(3)
+#define DSI_LANE_CLK            BIT(2)
+#define DSI_LANE_2              BIT(1)
+#define DSI_LANE_3              BIT(0)
+
 struct phy_axg_mipi_pcie_analog_priv {
 	struct phy *phy;
-	unsigned int mode;
 	struct regmap *regmap;
+	bool dsi_configured;
+	bool dsi_enabled;
+	bool powered;
+	struct phy_configure_opts_mipi_dphy config;
 };

-static const struct regmap_config phy_axg_mipi_pcie_analog_regmap_conf = {
-	.reg_bits = 8,
-	.val_bits = 32,
-	.reg_stride = 4,
-	.max_register = HHI_MIPI_CNTL2,
-};
-
-static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy)
+static void phy_bandgap_enable(struct phy_axg_mipi_pcie_analog_priv *priv)
 {
-	struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
-
-	/* MIPI not supported yet */
-	if (priv->mode != PHY_TYPE_PCIE)
-		return -EINVAL;
-
 	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
 			HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP);

 	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
 			HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE);
-	return 0;
 }

-static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy)
+static void phy_bandgap_disable(struct phy_axg_mipi_pcie_analog_priv *priv)
 {
-	struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
-
-	/* MIPI not supported yet */
-	if (priv->mode != PHY_TYPE_PCIE)
-		return -EINVAL;
-
 	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
 			HHI_MIPI_CNTL0_BANDGAP, 0);
 	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
 			HHI_MIPI_CNTL0_ENABLE, 0);
-	return 0;
 }

-static int phy_axg_mipi_pcie_analog_init(struct phy *phy)
+static void phy_dsi_analog_enable(struct phy_axg_mipi_pcie_analog_priv *priv)
 {
-	return 0;
+	u32 reg;
+
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			   HHI_MIPI_CNTL0_DIF_REF_CTL1,
+			   FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0x1b8));
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			   BIT(31), BIT(31));
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			   HHI_MIPI_CNTL0_DIF_REF_CTL0,
+			   FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL0, 0x8));
+
+	regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0x001e);
+
+	regmap_write(priv->regmap, HHI_MIPI_CNTL2,
+		     (0x26e0 << 16) | (0x459 << 0));
+
+	reg = DSI_LANE_CLK;
+	switch (priv->config.lanes) {
+	case 4:
+		reg |= DSI_LANE_3;
+		fallthrough;
+	case 3:
+		reg |= DSI_LANE_2;
+		fallthrough;
+	case 2:
+		reg |= DSI_LANE_1;
+		fallthrough;
+	case 1:
+		reg |= DSI_LANE_0;
+		break;
+	default:
+		reg = 0;
+	}
+
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL2,
+			   HHI_MIPI_CNTL2_CH_EN,
+			   FIELD_PREP(HHI_MIPI_CNTL2_CH_EN, reg));
+
+	priv->dsi_enabled = true;
 }

-static int phy_axg_mipi_pcie_analog_exit(struct phy *phy)
+static void phy_dsi_analog_disable(struct phy_axg_mipi_pcie_analog_priv *priv)
 {
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			HHI_MIPI_CNTL0_DIF_REF_CTL1,
+			FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0));
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, BIT(31), 0);
+	regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+			HHI_MIPI_CNTL0_DIF_REF_CTL1, 0);
+
+	regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0x6);
+
+	regmap_write(priv->regmap, HHI_MIPI_CNTL2, 0x00200000);
+
+	priv->dsi_enabled = false;
+}
+
+static int phy_axg_mipi_pcie_analog_configure(struct phy *phy,
+					      union phy_configure_opts *opts)
+{
+	struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
+	if (ret)
+		return ret;
+
+	memcpy(&priv->config, opts, sizeof(priv->config));
+
+	priv->dsi_configured = true;
+
+	/* If PHY was already powered on, setup the DSI analog part */
+	if (priv->powered) {
+		/* If reconfiguring, disable & reconfigure */
+		if (priv->dsi_enabled)
+			phy_dsi_analog_disable(priv);
+
+		usleep_range(100, 200);
+
+		phy_dsi_analog_enable(priv);
+	}
+
 	return 0;
 }

-static const struct phy_ops phy_axg_mipi_pcie_analog_ops = {
-	.init = phy_axg_mipi_pcie_analog_init,
-	.exit = phy_axg_mipi_pcie_analog_exit,
-	.power_on = phy_axg_mipi_pcie_analog_power_on,
-	.power_off = phy_axg_mipi_pcie_analog_power_off,
-	.owner = THIS_MODULE,
-};
+static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy)
+{
+	struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
+
+	phy_bandgap_enable(priv);
+
+	if (priv->dsi_configured)
+		phy_dsi_analog_enable(priv);
+
+	priv->powered = true;

-static struct phy *phy_axg_mipi_pcie_analog_xlate(struct device *dev,
-						  struct of_phandle_args *args)
+	return 0;
+}
+
+static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy)
 {
-	struct phy_axg_mipi_pcie_analog_priv *priv = dev_get_drvdata(dev);
-	unsigned int mode;
+	struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);

-	if (args->args_count != 1) {
-		dev_err(dev, "invalid number of arguments\n");
-		return ERR_PTR(-EINVAL);
-	}
+	phy_bandgap_disable(priv);

-	mode = args->args[0];
+	if (priv->dsi_enabled)
+		phy_dsi_analog_disable(priv);

-	/* MIPI mode is not supported yet */
-	if (mode != PHY_TYPE_PCIE) {
-		dev_err(dev, "invalid phy mode select argument\n");
-		return ERR_PTR(-EINVAL);
-	}
+	priv->powered = false;

-	priv->mode = mode;
-	return priv->phy;
+	return 0;
 }

+static const struct phy_ops phy_axg_mipi_pcie_analog_ops = {
+	.configure = phy_axg_mipi_pcie_analog_configure,
+	.power_on = phy_axg_mipi_pcie_analog_power_on,
+	.power_off = phy_axg_mipi_pcie_analog_power_off,
+	.owner = THIS_MODULE,
+};
+
 static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy;
@@ -126,27 +199,20 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
 	struct phy_axg_mipi_pcie_analog_priv *priv;
 	struct device_node *np = dev->of_node;
 	struct regmap *map;
-	struct resource *res;
-	void __iomem *base;
 	int ret;

 	priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(base)) {
-		dev_err(dev, "failed to get regmap base\n");
-		return PTR_ERR(base);
-	}
-
-	map = devm_regmap_init_mmio(dev, base,
-				    &phy_axg_mipi_pcie_analog_regmap_conf);
+	/* Get the hhi system controller node */
+	map = syscon_node_to_regmap(of_get_parent(dev->of_node));
 	if (IS_ERR(map)) {
-		dev_err(dev, "failed to get HHI regmap\n");
+		dev_err(dev,
+			"failed to get HHI regmap\n");
 		return PTR_ERR(map);
 	}
+
 	priv->regmap = map;

 	priv->phy = devm_phy_create(dev, np, &phy_axg_mipi_pcie_analog_ops);
@@ -160,8 +226,7 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
 	phy_set_drvdata(priv->phy, priv);
 	dev_set_drvdata(dev, priv);

-	phy = devm_of_phy_provider_register(dev,
-					    phy_axg_mipi_pcie_analog_xlate);
+	phy = devm_of_phy_provider_register(dev, of_phy_simple_xlate);

 	return PTR_ERR_OR_ZERO(phy);
 }

--- a/drivers/phy/amlogic/phy-meson-axg-pcie.c
+++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c
@@ -129,7 +129,6 @@ static int phy_axg_pcie_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct phy_axg_pcie_priv *priv;
 	struct device_node *np = dev->of_node;
-	struct resource *res;
 	void __iomem *base;
 	int ret;

@@ -145,8 +144,7 @@ static int phy_axg_pcie_probe(struct platform_device *pdev)
 		return ret;
 	}

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);

@@ -155,7 +153,7 @@ static int phy_axg_pcie_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->regmap))
 		return PTR_ERR(priv->regmap);

-	priv->reset = devm_reset_control_array_get(dev, false, false);
+	priv->reset = devm_reset_control_array_get_exclusive(dev);
 	if (IS_ERR(priv->reset))
 		return PTR_ERR(priv->reset);


--- a/drivers/phy/amlogic/phy-meson-g12a-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
@@ -292,7 +292,6 @@ static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct phy_provider *phy_provider;
-	struct resource *res;
 	struct phy_meson_g12a_usb2_priv *priv;
 	struct phy *phy;
 	void __iomem *base;
@@ -305,8 +304,7 @@ static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
 	priv->dev = dev;
 	platform_set_drvdata(pdev, priv);

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);


--- a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
@@ -386,7 +386,6 @@ static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 	struct phy_g12a_usb3_pcie_priv *priv;
-	struct resource *res;
 	struct phy_provider *phy_provider;
 	void __iomem *base;
 	int ret;
@@ -395,8 +394,7 @@ static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);

@@ -418,7 +416,7 @@ static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_disable_clk_ref;

-	priv->reset = devm_reset_control_array_get(dev, false, false);
+	priv->reset = devm_reset_control_array_get_exclusive(dev);
 	if (IS_ERR(priv->reset))
 		return PTR_ERR(priv->reset);


--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -158,7 +158,8 @@ static int phy_meson_gxl_usb2_set_mode(struct phy *phy,
 				   U2P_R0_DM_PULLDOWN);
 		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
 				   U2P_R0_DP_PULLDOWN);
-		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP, 0);
+		regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
+				   U2P_R0_ID_PULLUP);
 		break;

 	case PHY_MODE_USB_DEVICE:
@@ -230,7 +231,6 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct phy_provider *phy_provider;
-	struct resource *res;
 	struct phy_meson_gxl_usb2_priv *priv;
 	struct phy *phy;
 	void __iomem *base;
@@ -242,8 +242,7 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev)

 	platform_set_drvdata(pdev, priv);

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);


--- a/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
@@ -126,7 +126,6 @@ static int cygnus_pcie_phy_probe(struct platform_device *pdev)
 	struct device_node *node = dev->of_node, *child;
 	struct cygnus_pcie_phy_core *core;
 	struct phy_provider *provider;
-	struct resource *res;
 	unsigned cnt = 0;
 	int ret;

@@ -141,8 +140,7 @@ static int cygnus_pcie_phy_probe(struct platform_device *pdev)

 	core->dev = dev;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	core->base = devm_ioremap_resource(dev, res);
+	core->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(core->base))
 		return PTR_ERR(core->base);


--- a/drivers/phy/broadcom/phy-bcm-kona-usb2.c
+++ b/drivers/phy/broadcom/phy-bcm-kona-usb2.c
@@ -94,7 +94,6 @@ static int bcm_kona_usb2_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct bcm_kona_usb *phy;
-	struct resource *res;
 	struct phy *gphy;
 	struct phy_provider *phy_provider;

@@ -102,8 +101,7 @@ static int bcm_kona_usb2_probe(struct platform_device *pdev)
 	if (!phy)
 		return -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	phy->regs = devm_ioremap_resource(&pdev->dev, res);
+	phy->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(phy->regs))
 		return PTR_ERR(phy->regs);


--- a/drivers/phy/broadcom/phy-bcm-ns-usb2.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
@@ -83,7 +83,6 @@ static int bcm_ns_usb2_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct bcm_ns_usb2 *usb2;
-	struct resource *res;
 	struct phy_provider *phy_provider;

 	usb2 = devm_kzalloc(&pdev->dev, sizeof(*usb2), GFP_KERNEL);
@@ -91,8 +90,7 @@ static int bcm_ns_usb2_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	usb2->dev = dev;

-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmu");
-	usb2->dmu = devm_ioremap_resource(dev, res);
+	usb2->dmu = devm_platform_ioremap_resource_byname(pdev, "dmu");
 	if (IS_ERR(usb2->dmu)) {
 		dev_err(dev, "Failed to map DMU regs\n");
 		return PTR_ERR(usb2->dmu);

--- a/drivers/phy/broadcom/phy-bcm-ns-usb3.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
@@ -22,8 +22,6 @@
 #include <linux/phy/phy.h>
 #include <linux/slab.h>

-#define BCM_NS_USB3_MII_MNG_TIMEOUT_US	1000	/* usecs */
-
 #define BCM_NS_USB3_PHY_BASE_ADDR_REG	0x1f
 #define BCM_NS_USB3_PHY_PLL30_BLOCK	0x8000
 #define BCM_NS_USB3_PHY_TX_PMD_BLOCK	0x8040
@@ -51,11 +49,8 @@ struct bcm_ns_usb3 {
 	struct device *dev;
 	enum bcm_ns_family family;
 	void __iomem *dmp;
-	void __iomem *ccb_mii;
 	struct mdio_device *mdiodev;
 	struct phy *phy;
-
-	int (*phy_write)(struct bcm_ns_usb3 *usb3, u16 reg, u16 value);
 };

 static const struct of_device_id bcm_ns_usb3_id_table[] = {
@@ -69,13 +64,9 @@ static const struct of_device_id bcm_ns_usb3_id_table[] = {
 	},
 	{},
 };
-MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);

 static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
-				      u16 value)
-{
-	return usb3->phy_write(usb3, reg, value);
-}
+				      u16 value);

 static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
 {
@@ -187,7 +178,7 @@ static const struct phy_ops ops = {
 * MDIO driver code
 **************************************************/

-static int bcm_ns_usb3_mdiodev_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
+static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
 				      u16 value)
 {
 	struct mdio_device *mdiodev = usb3->mdiodev;
@@ -229,8 +220,6 @@ static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev)
 		return PTR_ERR(usb3->dmp);
 	}

-	usb3->phy_write = bcm_ns_usb3_mdiodev_phy_write;
-
 	usb3->phy = devm_phy_create(dev, NULL, &ops);
 	if (IS_ERR(usb3->phy)) {
 		dev_err(dev, "Failed to create PHY\n");
@@ -254,145 +243,7 @@ static struct mdio_driver bcm_ns_usb3_mdio_driver = {
 	.probe = bcm_ns_usb3_mdio_probe,
 };

-/**************************************************
- * Platform driver code
- **************************************************/
-
-static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr,
-				u32 mask, u32 value, int usec)
-{
-	u32 val;
-	int ret;
-
-	ret = readl_poll_timeout_atomic(addr, val, ((val & mask) == value),
-					10, usec);
-	if (ret)
-		dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
-
-	return ret;
-}
-
-static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3)
-{
-	return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL,
-				    0x0100, 0x0000,
-				    BCM_NS_USB3_MII_MNG_TIMEOUT_US);
-}
-
-static int bcm_ns_usb3_platform_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
-					  u16 value)
-{
-	u32 tmp = 0;
-	int err;
-
-	err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
-	if (err < 0) {
-		dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value);
-		return err;
-	}
-
-	/* TODO: Use a proper MDIO bus layer */
-	tmp |= 0x58020000; /* Magic value for MDIO PHY write */
-	tmp |= reg << 18;
-	tmp |= value;
-	writel(tmp, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
-
-	return bcm_ns_usb3_mii_mng_wait_idle(usb3);
-}
-
-static int bcm_ns_usb3_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	const struct of_device_id *of_id;
-	struct bcm_ns_usb3 *usb3;
-	struct resource *res;
-	struct phy_provider *phy_provider;
-
-	usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
-	if (!usb3)
-		return -ENOMEM;
-
-	usb3->dev = dev;
-
-	of_id = of_match_device(bcm_ns_usb3_id_table, dev);
-	if (!of_id)
-		return -EINVAL;
-	usb3->family = (enum bcm_ns_family)of_id->data;
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp");
-	usb3->dmp = devm_ioremap_resource(dev, res);
-	if (IS_ERR(usb3->dmp)) {
-		dev_err(dev, "Failed to map DMP regs\n");
-		return PTR_ERR(usb3->dmp);
-	}
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii");
-	usb3->ccb_mii = devm_ioremap_resource(dev, res);
-	if (IS_ERR(usb3->ccb_mii)) {
-		dev_err(dev, "Failed to map ChipCommon B MII regs\n");
-		return PTR_ERR(usb3->ccb_mii);
-	}
-
-	/* Enable MDIO. Setting MDCDIV as 26  */
-	writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
-
-	/* Wait for MDIO? */
-	udelay(2);
-
-	usb3->phy_write = bcm_ns_usb3_platform_phy_write;
-
-	usb3->phy = devm_phy_create(dev, NULL, &ops);
-	if (IS_ERR(usb3->phy)) {
-		dev_err(dev, "Failed to create PHY\n");
-		return PTR_ERR(usb3->phy);
-	}
-
-	phy_set_drvdata(usb3->phy, usb3);
-	platform_set_drvdata(pdev, usb3);
-
-	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-	if (!IS_ERR(phy_provider))
-		dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n");
-
-	return PTR_ERR_OR_ZERO(phy_provider);
-}
-
-static struct platform_driver bcm_ns_usb3_driver = {
-	.probe		= bcm_ns_usb3_probe,
-	.driver = {
-		.name = "bcm_ns_usb3",
-		.of_match_table = bcm_ns_usb3_id_table,
-	},
-};
-
-static int __init bcm_ns_usb3_module_init(void)
-{
-	int err;
-
-	/*
-	 * For backward compatibility we register as MDIO and platform driver.
-	 * After getting MDIO binding commonly used (e.g. switching all DT files
-	 * to use it) we should deprecate the old binding and eventually drop
-	 * support for it.
-	 */
-
-	err = mdio_driver_register(&bcm_ns_usb3_mdio_driver);
-	if (err)
-		return err;
-
-	err = platform_driver_register(&bcm_ns_usb3_driver);
-	if (err)
-		mdio_driver_unregister(&bcm_ns_usb3_mdio_driver);
-
-	return err;
-}
-module_init(bcm_ns_usb3_module_init);
-
-static void __exit bcm_ns_usb3_module_exit(void)
-{
-	platform_driver_unregister(&bcm_ns_usb3_driver);
-	mdio_driver_unregister(&bcm_ns_usb3_mdio_driver);
-}
-module_exit(bcm_ns_usb3_module_exit)
+mdio_module_driver(bcm_ns_usb3_mdio_driver);

 MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);
--- a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
+++ b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
@@ -293,7 +293,6 @@ static int ns2_drd_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct ns2_phy_driver *driver;
 	struct ns2_phy_data *data;
-	struct resource *res;
 	int ret;
 	u32 val;

@@ -307,23 +306,19 @@ static int ns2_drd_phy_probe(struct platform_device *pdev)
 	if (!driver->data)
 		return -ENOMEM;

-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "icfg");
-	driver->icfgdrd_regs = devm_ioremap_resource(dev, res);
+	driver->icfgdrd_regs = devm_platform_ioremap_resource_byname(pdev, "icfg");
 	if (IS_ERR(driver->icfgdrd_regs))
 		return PTR_ERR(driver->icfgdrd_regs);

-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rst-ctrl");
-	driver->idmdrd_rst_ctrl = devm_ioremap_resource(dev, res);
+	driver->idmdrd_rst_ctrl = devm_platform_ioremap_resource_byname(pdev, "rst-ctrl");
 	if (IS_ERR(driver->idmdrd_rst_ctrl))
 		return PTR_ERR(driver->idmdrd_rst_ctrl);

-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crmu-ctrl");
-	driver->crmu_usb2_ctrl = devm_ioremap_resource(dev, res);
+	driver->crmu_usb2_ctrl = devm_platform_ioremap_resource_byname(pdev, "crmu-ctrl");
 	if (IS_ERR(driver->crmu_usb2_ctrl))
 		return PTR_ERR(driver->crmu_usb2_ctrl);

-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "usb2-strap");
-	driver->usb2h_strap_reg = devm_ioremap_resource(dev, res);
+	driver->usb2h_strap_reg = devm_platform_ioremap_resource_byname(pdev, "usb2-strap");
 	if (IS_ERR(driver->usb2h_strap_reg))
 		return PTR_ERR(driver->usb2h_strap_reg);


--- a/drivers/phy/broadcom/phy-bcm-sr-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-sr-pcie.c
@@ -217,7 +217,6 @@ static int sr_pcie_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *node = dev->of_node;
 	struct sr_pcie_phy_core *core;
-	struct resource *res;
 	struct phy_provider *provider;
 	unsigned int phy_idx = 0;

@@ -226,9 +225,7 @@ static int sr_pcie_phy_probe(struct platform_device *pdev)
 		return -ENOMEM;

 	core->dev = dev;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	core->base = devm_ioremap_resource(core->dev, res);
+	core->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(core->base))
 		return PTR_ERR(core->base);


--- a/drivers/phy/broadcom/phy-bcm-sr-usb.c
+++ b/drivers/phy/broadcom/phy-bcm-sr-usb.c
@@ -300,14 +300,12 @@ static int bcm_usb_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *dn = dev->of_node;
 	const struct of_device_id *of_id;
-	struct resource *res;
 	void __iomem *regs;
 	int ret;
 	enum bcm_usb_phy_version version;
 	struct phy_provider *phy_provider;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	regs = devm_ioremap_resource(dev, res);
+	regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(regs))
 		return PTR_ERR(regs);


--- a/drivers/phy/broadcom/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -65,6 +65,7 @@ struct brcm_sata_port {
 	bool ssc_en;
 	enum brcm_sata_phy_rxaeq_mode rxaeq_mode;
 	u32 rxaeq_val;
+	u32 tx_amplitude_val;
 };

 struct brcm_sata_phy {
@@ -84,6 +85,10 @@ enum sata_phy_regs {
 	BLOCK0_SPARE_OOB_CLK_SEL_MASK		= 0x3,
 	BLOCK0_SPARE_OOB_CLK_SEL_REFBY2		= 0x1,

+	BLOCK1_REG_BANK				= 0x10,
+	BLOCK1_TEST_TX				= 0x83,
+	BLOCK1_TEST_TX_AMP_SHIFT		= 12,
+
 	PLL_REG_BANK_0				= 0x050,
 	PLL_REG_BANK_0_PLLCONTROL_0		= 0x81,
 	PLLCONTROL_0_FREQ_DET_RESTART		= BIT(13),
@@ -379,6 +384,29 @@ static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port)
 	brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1,
 			 ~tmp, RXPMD_MON_CORRECT_EN | value);

+	tmp = GENMASK(15, 12);
+	switch (port->tx_amplitude_val) {
+	case 400:
+		value = BIT(12) | BIT(13);
+		break;
+	case 500:
+		value = BIT(13);
+		break;
+	case 600:
+		value = BIT(12);
+		break;
+	case 800:
+		value = 0;
+		break;
+	default:
+		value = tmp;
+		break;
+	}
+
+	if (value != tmp)
+		brcm_sata_phy_wr(port, BLOCK1_REG_BANK, BLOCK1_TEST_TX, ~tmp,
+				 value);
+
 	/* Turn on/off SSC */
 	brcm_sata_phy_wr(port, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN,
 			 port->ssc_en ? TX_ACTRL5_SSC_EN : 0);
@@ -726,7 +754,6 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 	struct device_node *dn = dev->of_node, *child;
 	const struct of_device_id *of_id;
 	struct brcm_sata_phy *priv;
-	struct resource *res;
 	struct phy_provider *provider;
 	int ret, count = 0;

@@ -739,8 +766,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 	dev_set_drvdata(dev, priv);
 	priv->dev = dev;

-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
-	priv->phy_base = devm_ioremap_resource(dev, res);
+	priv->phy_base = devm_platform_ioremap_resource_byname(pdev, "phy");
 	if (IS_ERR(priv->phy_base))
 		return PTR_ERR(priv->phy_base);

@@ -751,9 +777,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 		priv->version = BRCM_SATA_PHY_STB_28NM;

 	if (priv->version == BRCM_SATA_PHY_IPROC_NS2) {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-						   "phy-ctrl");
-		priv->ctrl_base = devm_ioremap_resource(dev, res);
+		priv->ctrl_base = devm_platform_ioremap_resource_byname(pdev, "phy-ctrl");
 		if (IS_ERR(priv->ctrl_base))
 			return PTR_ERR(priv->ctrl_base);
 	}
@@ -791,6 +815,10 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 		if (port->rxaeq_mode == RXAEQ_MODE_MANUAL)
 			of_property_read_u32(child, "brcm,rxaeq-value",
 					     &port->rxaeq_val);
+
+		of_property_read_u32(child, "brcm,tx-amplitude-millivolt",
+				     &port->tx_amplitude_val);
+
 		port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
 		if (IS_ERR(port->phy)) {
 			dev_err(dev, "failed to create PHY\n");

--- a/drivers/phy/cadence/cdns-dphy.c
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -314,7 +314,6 @@ static int cdns_dphy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
 	struct cdns_dphy *dphy;
-	struct resource *res;
 	int ret;

 	dphy = devm_kzalloc(&pdev->dev, sizeof(*dphy), GFP_KERNEL);
@@ -326,8 +325,7 @@ static int cdns_dphy_probe(struct platform_device *pdev)
 	if (!dphy->ops)
 		return -EINVAL;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dphy->regs = devm_ioremap_resource(&pdev->dev, res);
+	dphy->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(dphy->regs))
 		return PTR_ERR(dphy->regs);


--- a/drivers/phy/cadence/phy-cadence-salvo.c
+++ b/drivers/phy/cadence/phy-cadence-salvo.c
@@ -263,7 +263,6 @@ static int cdns_salvo_phy_probe(struct platform_device *pdev)
 	struct phy_provider *phy_provider;
 	struct device *dev = &pdev->dev;
 	struct cdns_salvo_phy *salvo_phy;
-	struct resource *res;
 	const struct of_device_id *match;
 	struct cdns_salvo_data *data;

@@ -281,8 +280,7 @@ static int cdns_salvo_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(salvo_phy->clk))
 		return PTR_ERR(salvo_phy->clk);

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	salvo_phy->base = devm_ioremap_resource(dev, res);
+	salvo_phy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(salvo_phy->base))
 		return PTR_ERR(salvo_phy->base);


--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -479,7 +479,6 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
 	const struct of_device_id *match;
 	struct cdns_sierra_data *data;
 	unsigned int id_value;
-	struct resource *res;
 	int i, ret, node = 0;
 	void __iomem *base;
 	struct clk *clk;
@@ -502,8 +501,7 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
 	sp->dev = dev;
 	sp->init_data = data;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base)) {
 		dev_err(dev, "missing \"reg\"\n");
 		return PTR_ERR(base);

--- a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
+++ b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
@@ -434,7 +434,6 @@ static int mixel_dphy_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	struct phy_provider *phy_provider;
 	struct mixel_dphy_priv *priv;
-	struct resource *res;
 	struct phy *phy;
 	void __iomem *base;

@@ -449,8 +448,7 @@ static int mixel_dphy_probe(struct platform_device *pdev)
 	if (!priv->devdata)
 		return -EINVAL;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);


--- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
@@ -131,7 +131,7 @@ static const struct phy_ops imx8mq_usb_phy_ops = {
 	.owner		= THIS_MODULE,
 };

-static struct phy_ops imx8mp_usb_phy_ops = {
+static const struct phy_ops imx8mp_usb_phy_ops = {
 	.init		= imx8mp_usb_phy_init,
 	.power_on	= imx8mq_phy_power_on,
 	.power_off	= imx8mq_phy_power_off,
@@ -152,7 +152,6 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 	struct phy_provider *phy_provider;
 	struct device *dev = &pdev->dev;
 	struct imx8mq_usb_phy *imx_phy;
-	struct resource *res;
 	const struct phy_ops *phy_ops;

 	imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL);
@@ -165,8 +164,7 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(imx_phy->clk);
 	}

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	imx_phy->base = devm_ioremap_resource(dev, res);
+	imx_phy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(imx_phy->base))
 		return PTR_ERR(imx_phy->base);


--- a/drivers/phy/ingenic/Kconfig
+++ b/drivers/phy/ingenic/Kconfig
+# SPDX-License-Identifier: GPL-2.0
+#
+# Phy drivers for Ingenic platforms
+#
+config PHY_INGENIC_USB
+	tristate "Ingenic SoCs USB PHY Driver"
+	depends on MIPS || COMPILE_TEST
+	depends on USB_SUPPORT
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  This driver provides USB PHY support for the USB controller found
+	  on the JZ-series and X-series SoCs from Ingenic.
--- a/drivers/staging/mt7621-pci-phy/Makefile
+++ b/drivers/staging/mt7621-pci-phy/Makefile
 # SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_PCI_MT7621_PHY)       += pci-mt7621-phy.o
+obj-y		+= phy-ingenic-usb.o
--- a/drivers/phy/ingenic/phy-ingenic-usb.c
+++ b/drivers/phy/ingenic/phy-ingenic-usb.c
--- a/drivers/phy/intel/Kconfig
+++ b/drivers/phy/intel/Kconfig
@@ -14,6 +14,18 @@ config PHY_INTEL_KEEMBAY_EMMC
 	  To compile this driver as a module, choose M here: the module
 	  will be called phy-keembay-emmc.ko.

+config PHY_INTEL_KEEMBAY_USB
+	tristate "Intel Keem Bay USB PHY driver"
+	depends on ARCH_KEEMBAY || COMPILE_TEST
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Choose this option if you have an Intel Keem Bay SoC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called phy-keembay-usb.ko.
+
 config PHY_INTEL_LGM_COMBO
 	bool "Intel Lightning Mountain ComboPHY driver"
 	depends on X86 || COMPILE_TEST

--- a/drivers/phy/intel/Makefile
+++ b/drivers/phy/intel/Makefile
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_PHY_INTEL_KEEMBAY_EMMC)	+= phy-intel-keembay-emmc.o
+obj-$(CONFIG_PHY_INTEL_KEEMBAY_USB)	+= phy-intel-keembay-usb.o
 obj-$(CONFIG_PHY_INTEL_LGM_COMBO)	+= phy-intel-lgm-combo.o
 obj-$(CONFIG_PHY_INTEL_LGM_EMMC)	+= phy-intel-lgm-emmc.o
--- a/drivers/phy/intel/phy-intel-keembay-usb.c
+++ b/drivers/phy/intel/phy-intel-keembay-usb.c
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Keem Bay USB PHY driver
+ * Copyright (C) 2020 Intel Corporation
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* USS (USB Subsystem) clock control registers */
+#define USS_CPR_CLK_EN		0x00
+#define USS_CPR_CLK_SET		0x04
+#define USS_CPR_CLK_CLR		0x08
+#define USS_CPR_RST_EN		0x10
+#define USS_CPR_RST_SET		0x14
+#define USS_CPR_RST_CLR		0x18
+
+/* USS clock/reset bit fields */
+#define USS_CPR_PHY_TST		BIT(6)
+#define USS_CPR_LOW_JIT		BIT(5)
+#define USS_CPR_CORE		BIT(4)
+#define USS_CPR_SUSPEND		BIT(3)
+#define USS_CPR_ALT_REF		BIT(2)
+#define USS_CPR_REF		BIT(1)
+#define USS_CPR_SYS		BIT(0)
+#define USS_CPR_MASK		GENMASK(6, 0)
+
+/* USS APB slave registers */
+#define USS_USB_CTRL_CFG0		0x10
+#define  VCC_RESET_N_MASK		BIT(31)
+
+#define USS_USB_PHY_CFG0		0x30
+#define  POR_MASK			BIT(15)
+#define  PHY_RESET_MASK			BIT(14)
+#define  PHY_REF_USE_PAD_MASK		BIT(5)
+
+#define USS_USB_PHY_CFG6		0x64
+#define  PHY0_SRAM_EXT_LD_DONE_MASK	BIT(23)
+
+#define USS_USB_PARALLEL_IF_CTRL	0xa0
+#define  USB_PHY_CR_PARA_SEL_MASK	BIT(2)
+
+#define USS_USB_TSET_SIGNALS_AND_GLOB	0xac
+#define  USB_PHY_CR_PARA_CLK_EN_MASK	BIT(7)
+
+#define USS_USB_STATUS_REG		0xb8
+#define  PHY0_SRAM_INIT_DONE_MASK	BIT(3)
+
+#define USS_USB_TIEOFFS_CONSTANTS_REG1	0xc0
+#define  IDDQ_ENABLE_MASK		BIT(10)
+
+struct keembay_usb_phy {
+	struct device *dev;
+	struct regmap *regmap_cpr;
+	struct regmap *regmap_slv;
+};
+
+static const struct regmap_config keembay_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = USS_USB_TIEOFFS_CONSTANTS_REG1,
+};
+
+static int keembay_usb_clocks_on(struct keembay_usb_phy *priv)
+{
+	int ret;
+
+	ret = regmap_update_bits(priv->regmap_cpr, USS_CPR_CLK_SET,
+				 USS_CPR_MASK, USS_CPR_MASK);
+	if (ret) {
+		dev_err(priv->dev, "error clock set: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_update_bits(priv->regmap_cpr, USS_CPR_RST_SET,
+				 USS_CPR_MASK, USS_CPR_MASK);
+	if (ret) {
+		dev_err(priv->dev, "error reset set: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_update_bits(priv->regmap_slv,
+				 USS_USB_TIEOFFS_CONSTANTS_REG1,
+				 IDDQ_ENABLE_MASK,
+				 FIELD_PREP(IDDQ_ENABLE_MASK, 0));
+	if (ret) {
+		dev_err(priv->dev, "error iddq disable: %d\n", ret);
+		return ret;
+	}
+
+	/* Wait 30us to ensure all analog blocks are powered up. */
+	usleep_range(30, 60);
+
+	ret = regmap_update_bits(priv->regmap_slv, USS_USB_PHY_CFG0,
+				 PHY_REF_USE_PAD_MASK,
+				 FIELD_PREP(PHY_REF_USE_PAD_MASK, 1));
+	if (ret)
+		dev_err(priv->dev, "error ref clock select: %d\n", ret);
+
+	return ret;
+}
+
+static int keembay_usb_core_off(struct keembay_usb_phy *priv)
+{
+	int ret;
+
+	ret = regmap_update_bits(priv->regmap_slv, USS_USB_CTRL_CFG0,
+				 VCC_RESET_N_MASK,
+				 FIELD_PREP(VCC_RESET_N_MASK, 0));
+	if (ret)
+		dev_err(priv->dev, "error core reset: %d\n", ret);
+
+	return ret;
+}
+
+static int keembay_usb_core_on(struct keembay_usb_phy *priv)
+{
+	int ret;
+
+	ret = regmap_update_bits(priv->regmap_slv, USS_USB_CTRL_CFG0,
+				 VCC_RESET_N_MASK,
+				 FIELD_PREP(VCC_RESET_N_MASK, 1));
+	if (ret)
+		dev_err(priv->dev, "error core on: %d\n", ret);
+
+	return ret;
+}
+
+static int keembay_usb_phys_on(struct keembay_usb_phy *priv)
+{
+	int ret;
+
+	ret = regmap_update_bits(priv->regmap_slv, USS_USB_PHY_CFG0,
+				 POR_MASK | PHY_RESET_MASK,
+				 FIELD_PREP(POR_MASK | PHY_RESET_MASK, 0));
+	if (ret)
+		dev_err(priv->dev, "error phys on: %d\n", ret);
+
+	return ret;
+}
+
+static int keembay_usb_phy_init(struct phy *phy)
+{
+	struct keembay_usb_phy *priv = phy_get_drvdata(phy);
+	u32 val;
+	int ret;
+
+	ret = keembay_usb_core_off(priv);
+	if (ret)
+		return ret;
+
+	/*
+	 * According to Keem Bay datasheet, wait minimum 20us after clock
+	 * enable before bringing PHYs out of reset.
+	 */
+	usleep_range(20, 40);
+
+	ret = keembay_usb_phys_on(priv);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(priv->regmap_slv,
+				 USS_USB_TSET_SIGNALS_AND_GLOB,
+				 USB_PHY_CR_PARA_CLK_EN_MASK,
+				 FIELD_PREP(USB_PHY_CR_PARA_CLK_EN_MASK, 0));
+	if (ret) {
+		dev_err(priv->dev, "error cr clock disable: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * According to Keem Bay datasheet, wait 2us after disabling the
+	 * clock into the USB 3.x parallel interface.
+	 */
+	udelay(2);
+
+	ret = regmap_update_bits(priv->regmap_slv,
+				 USS_USB_PARALLEL_IF_CTRL,
+				 USB_PHY_CR_PARA_SEL_MASK,
+				 FIELD_PREP(USB_PHY_CR_PARA_SEL_MASK, 1));
+	if (ret) {
+		dev_err(priv->dev, "error cr select: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_update_bits(priv->regmap_slv,
+				 USS_USB_TSET_SIGNALS_AND_GLOB,
+				 USB_PHY_CR_PARA_CLK_EN_MASK,
+				 FIELD_PREP(USB_PHY_CR_PARA_CLK_EN_MASK, 1));
+	if (ret) {
+		dev_err(priv->dev, "error cr clock enable: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read_poll_timeout(priv->regmap_slv, USS_USB_STATUS_REG,
+				       val, val & PHY0_SRAM_INIT_DONE_MASK,
+				       USEC_PER_MSEC, 10 * USEC_PER_MSEC);
+	if (ret) {
+		dev_err(priv->dev, "SRAM init not done: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_update_bits(priv->regmap_slv, USS_USB_PHY_CFG6,
+				 PHY0_SRAM_EXT_LD_DONE_MASK,
+				 FIELD_PREP(PHY0_SRAM_EXT_LD_DONE_MASK, 1));
+	if (ret) {
+		dev_err(priv->dev, "error SRAM init done set: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * According to Keem Bay datasheet, wait 20us after setting the
+	 * SRAM load done bit, before releasing the controller reset.
+	 */
+	usleep_range(20, 40);
+
+	return keembay_usb_core_on(priv);
+}
+
+static const struct phy_ops ops = {
+	.init		= keembay_usb_phy_init,
+	.owner		= THIS_MODULE,
+};
+
+static int keembay_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct keembay_usb_phy *priv;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	void __iomem *base;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource_byname(pdev, "cpr-apb-base");
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap_cpr = devm_regmap_init_mmio(dev, base,
+						 &keembay_regmap_config);
+	if (IS_ERR(priv->regmap_cpr))
+		return PTR_ERR(priv->regmap_cpr);
+
+	base = devm_platform_ioremap_resource_byname(pdev, "slv-apb-base");
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap_slv = devm_regmap_init_mmio(dev, base,
+						 &keembay_regmap_config);
+	if (IS_ERR(priv->regmap_slv))
+		return PTR_ERR(priv->regmap_slv);
+
+	generic_phy = devm_phy_create(dev, dev->of_node, &ops);
+	if (IS_ERR(generic_phy))
+		return dev_err_probe(dev, PTR_ERR(generic_phy),
+				     "failed to create PHY\n");
+
+	phy_set_drvdata(generic_phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return dev_err_probe(dev, PTR_ERR(phy_provider),
+				     "failed to register phy provider\n");
+
+	/* Setup USB subsystem clocks */
+	ret = keembay_usb_clocks_on(priv);
+	if (ret)
+		return ret;
+
+	/* and turn on the DWC3 core, prior to DWC3 driver init. */
+	return keembay_usb_core_on(priv);
+}
+
+static const struct of_device_id keembay_usb_phy_dt_ids[] = {
+	{ .compatible = "intel,keembay-usb-phy" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, keembay_usb_phy_dt_ids);
+
+static struct platform_driver keembay_usb_phy_driver = {
+	.probe		= keembay_usb_phy_probe,
+	.driver		= {
+		.name	= "keembay-usb-phy",
+		.of_match_table = keembay_usb_phy_dt_ids,
+	},
+};
+module_platform_driver(keembay_usb_phy_driver);
+
+MODULE_AUTHOR("Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>");
+MODULE_DESCRIPTION("Intel Keem Bay USB PHY driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
+++ b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
@@ -402,7 +402,6 @@ static int ltq_vrx200_pcie_phy_probe(struct platform_device *pdev)
 	struct ltq_vrx200_pcie_phy_priv *priv;
 	struct device *dev = &pdev->dev;
 	struct phy_provider *provider;
-	struct resource *res;
 	void __iomem *base;
 	int ret;

@@ -410,8 +409,7 @@ static int ltq_vrx200_pcie_phy_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);


--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -116,3 +116,15 @@ config PHY_MMP3_USB
 	  The PHY driver will be used by Marvell udc/ehci/otg driver.

 	  To compile this driver as a module, choose M here.
+
+config PHY_MMP3_HSIC
+	tristate "Marvell MMP3 USB HSIC PHY Driver"
+	depends on MACH_MMP3_DT || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this to support Marvell MMP3 USB HSIC PHY driver for
+	  Marvell MMP3 SoC. This driver will be used my the Marvell EHCI
+	  driver to initialize the interface to internal USB HSIC
+	  components on MMP3-based boards.
+
+	  To compile this driver as a module, choose M here.
--- a/drivers/phy/marvell/Makefile
+++ b/drivers/phy/marvell/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o
 obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
 obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
 obj-$(CONFIG_PHY_MMP3_USB)		+= phy-mmp3-usb.o
+obj-$(CONFIG_PHY_MMP3_HSIC)		+= phy-mmp3-hsic.o
 obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY)	+= phy-mvebu-a3700-comphy.o
 obj-$(CONFIG_PHY_MVEBU_A3700_UTMI)	+= phy-mvebu-a3700-utmi.o
 obj-$(CONFIG_PHY_MVEBU_A38X_COMPHY)	+= phy-armada38x-comphy.o

--- a/drivers/phy/marvell/phy-armada375-usb2.c
+++ b/drivers/phy/marvell/phy-armada375-usb2.c
@@ -105,15 +105,13 @@ static int armada375_usb_phy_probe(struct platform_device *pdev)
 	struct phy *phy;
 	struct phy_provider *phy_provider;
 	void __iomem *usb_cluster_base;
-	struct resource *res;
 	struct armada375_cluster_phy *cluster_phy;

 	cluster_phy = devm_kzalloc(dev, sizeof(*cluster_phy), GFP_KERNEL);
 	if (!cluster_phy)
 		return  -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	usb_cluster_base = devm_ioremap_resource(&pdev->dev, res);
+	usb_cluster_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(usb_cluster_base))
 		return PTR_ERR(usb_cluster_base);


--- a/drivers/phy/marvell/phy-berlin-usb.c
+++ b/drivers/phy/marvell/phy-berlin-usb.c
@@ -165,7 +165,6 @@ static int phy_berlin_usb_probe(struct platform_device *pdev)
 	const struct of_device_id *match =
 		of_match_device(phy_berlin_usb_of_match, &pdev->dev);
 	struct phy_berlin_usb_priv *priv;
-	struct resource *res;
 	struct phy *phy;
 	struct phy_provider *phy_provider;

@@ -173,8 +172,7 @@ static int phy_berlin_usb_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);


--- a/drivers/phy/marvell/phy-mmp3-hsic.c
+++ b/drivers/phy/marvell/phy-mmp3-hsic.c
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define HSIC_CTRL	0x08
+#define HSIC_ENABLE	BIT(7)
+#define PLL_BYPASS	BIT(4)
+
+static int mmp3_hsic_phy_init(struct phy *phy)
+{
+	void __iomem *base = (void __iomem *)phy_get_drvdata(phy);
+	u32 hsic_ctrl;
+
+	hsic_ctrl = readl_relaxed(base + HSIC_CTRL);
+	hsic_ctrl |= HSIC_ENABLE;
+	hsic_ctrl |= PLL_BYPASS;
+	writel_relaxed(hsic_ctrl, base + HSIC_CTRL);
+
+	return 0;
+}
+
+static const struct phy_ops mmp3_hsic_phy_ops = {
+	.init		= mmp3_hsic_phy_init,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id mmp3_hsic_phy_of_match[] = {
+	{ .compatible = "marvell,mmp3-hsic-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mmp3_hsic_phy_of_match);
+
+static int mmp3_hsic_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *provider;
+	struct resource *resource;
+	void __iomem *base;
+	struct phy *phy;
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, resource);
+	if (IS_ERR(base)) {
+		dev_err(dev, "failed to remap PHY regs\n");
+		return PTR_ERR(base);
+	}
+
+	phy = devm_phy_create(dev, NULL, &mmp3_hsic_phy_ops);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(phy);
+	}
+
+	phy_set_drvdata(phy, (void *)base);
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "failed to register PHY provider\n");
+		return PTR_ERR(provider);
+	}
+
+	return 0;
+}
+
+static struct platform_driver mmp3_hsic_phy_driver = {
+	.probe		= mmp3_hsic_phy_probe,
+	.driver		= {
+		.name	= "mmp3-hsic-phy",
+		.of_match_table = mmp3_hsic_phy_of_match,
+	},
+};
+module_platform_driver(mmp3_hsic_phy_driver);
+
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
+MODULE_DESCRIPTION("Marvell MMP3 USB HSIC PHY Driver");
+MODULE_LICENSE("GPL");
--- a/drivers/phy/marvell/phy-mmp3-usb.c
+++ b/drivers/phy/marvell/phy-mmp3-usb.c
@@ -246,7 +246,6 @@ MODULE_DEVICE_TABLE(of, mmp3_usb_phy_of_match);
 static int mmp3_usb_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct resource *resource;
 	struct mmp3_usb_phy *mmp3_usb_phy;
 	struct phy_provider *provider;

@@ -254,8 +253,7 @@ static int mmp3_usb_phy_probe(struct platform_device *pdev)
 	if (!mmp3_usb_phy)
 		return -ENOMEM;

-	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	mmp3_usb_phy->base = devm_ioremap_resource(dev, resource);
+	mmp3_usb_phy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(mmp3_usb_phy->base)) {
 		dev_err(dev, "failed to remap PHY regs\n");
 		return PTR_ERR(mmp3_usb_phy->base);

--- a/drivers/phy/marvell/phy-mvebu-sata.c
+++ b/drivers/phy/marvell/phy-mvebu-sata.c
@@ -80,7 +80,6 @@ static const struct phy_ops phy_mvebu_sata_ops = {
 static int phy_mvebu_sata_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
-	struct resource *res;
 	struct priv *priv;
 	struct phy *phy;

@@ -88,8 +87,7 @@ static int phy_mvebu_sata_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);


--- a/drivers/phy/marvell/phy-pxa-28nm-hsic.c
+++ b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
@@ -162,7 +162,6 @@ static int mv_hsic_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
 	struct mv_hsic_phy *mv_phy;
-	struct resource *r;

 	mv_phy = devm_kzalloc(&pdev->dev, sizeof(*mv_phy), GFP_KERNEL);
 	if (!mv_phy)
@@ -176,8 +175,7 @@ static int mv_hsic_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(mv_phy->clk);
 	}

-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	mv_phy->base = devm_ioremap_resource(&pdev->dev, r);
+	mv_phy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(mv_phy->base))
 		return PTR_ERR(mv_phy->base);


--- a/drivers/phy/marvell/phy-pxa-28nm-usb2.c
+++ b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
@@ -294,7 +294,6 @@ static int mv_usb2_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
 	struct mv_usb2_phy *mv_phy;
-	struct resource *r;

 	mv_phy = devm_kzalloc(&pdev->dev, sizeof(*mv_phy), GFP_KERNEL);
 	if (!mv_phy)
@@ -308,8 +307,7 @@ static int mv_usb2_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(mv_phy->clk);
 	}

-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	mv_phy->base = devm_ioremap_resource(&pdev->dev, r);
+	mv_phy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(mv_phy->base))
 		return PTR_ERR(mv_phy->base);


--- a/drivers/phy/marvell/phy-pxa-usb.c
+++ b/drivers/phy/marvell/phy-pxa-usb.c
@@ -286,7 +286,6 @@ MODULE_DEVICE_TABLE(of, pxa_usb_phy_of_match);
 static int pxa_usb_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct resource *resource;
 	struct pxa_usb_phy *pxa_usb_phy;
 	struct phy_provider *provider;
 	const struct of_device_id *of_id;
@@ -301,8 +300,7 @@ static int pxa_usb_phy_probe(struct platform_device *pdev)
 	else
 		pxa_usb_phy->version = PXA_USB_PHY_MMP2;

-	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pxa_usb_phy->base = devm_ioremap_resource(dev, resource);
+	pxa_usb_phy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pxa_usb_phy->base)) {
 		dev_err(dev, "failed to remap PHY regs\n");
 		return PTR_ERR(pxa_usb_phy->base);

--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -5,7 +5,8 @@
 config PHY_MTK_TPHY
 	tristate "MediaTek T-PHY Driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
-	depends on OF
+	depends on OF && OF_ADDRESS
+	depends on HAS_IOMEM
 	select GENERIC_PHY
 	help
 	  Say 'Y' here to add support for MediaTek T-PHY driver,
@@ -29,7 +30,8 @@ config PHY_MTK_UFS
 config PHY_MTK_XSPHY
 	tristate "MediaTek XS-PHY Driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
-	depends on OF
+	depends on OF && OF_ADDRESS
+	depends on HAS_IOMEM
 	select GENERIC_PHY
 	help
 	  Enable this to support the SuperSpeedPlus XS-PHY transceiver for
@@ -38,7 +40,9 @@ config PHY_MTK_XSPHY

 config PHY_MTK_HDMI
 	tristate "MediaTek HDMI-PHY Driver"
-	depends on ARCH_MEDIATEK && OF
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on COMMON_CLK
+	depends on OF
 	select GENERIC_PHY
 	help
 	  Support HDMI PHY for Mediatek SoCs.
--- a/drivers/phy/mediatek/phy-mtk-hdmi.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi.c
@@ -84,6 +84,7 @@ mtk_hdmi_phy_dev_get_ops(const struct mtk_hdmi_phy *hdmi_phy)
 	    hdmi_phy->conf->hdmi_phy_disable_tmds)
 		return &mtk_hdmi_phy_dev_ops;

+	if (hdmi_phy)
 		dev_err(hdmi_phy->dev, "Failed to get dev ops of phy\n");
 	return NULL;
 }
@@ -201,7 +202,7 @@ static const struct of_device_id mtk_hdmi_phy_match[] = {
 	{},
 };

-struct platform_driver mtk_hdmi_phy_driver = {
+static struct platform_driver mtk_hdmi_phy_driver = {
 	.probe = mtk_hdmi_phy_probe,
 	.driver = {
 		.name = "mediatek-hdmi-phy",

--- a/drivers/phy/mediatek/phy-mtk-ufs.c
+++ b/drivers/phy/mediatek/phy-mtk-ufs.c
@@ -195,7 +195,6 @@ static int ufs_mtk_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct phy *generic_phy;
 	struct phy_provider *phy_provider;
-	struct resource *res;
 	struct ufs_mtk_phy *phy;
 	int ret;

@@ -203,8 +202,7 @@ static int ufs_mtk_phy_probe(struct platform_device *pdev)
 	if (!phy)
 		return -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	phy->mmio = devm_ioremap_resource(dev, res);
+	phy->mmio = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(phy->mmio))
 		return PTR_ERR(phy->mmio);


--- a/drivers/phy/phy-xgene.c
+++ b/drivers/phy/phy-xgene.c
@@ -1644,7 +1644,6 @@ static int xgene_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
 	struct xgene_phy_ctx *ctx;
-	struct resource *res;
 	u32 default_spd[] = DEFAULT_SATA_SPD_SEL;
 	u32 default_txboost_gain[] = DEFAULT_SATA_TXBOOST_GAIN;
 	u32 default_txeye_direction[] = DEFAULT_SATA_TXEYEDIRECTION;
@@ -1661,8 +1660,7 @@ static int xgene_phy_probe(struct platform_device *pdev)

 	ctx->dev = &pdev->dev;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ctx->sds_base = devm_ioremap_resource(&pdev->dev, res);
+	ctx->sds_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(ctx->sds_base))
 		return PTR_ERR(ctx->sds_base);


--- a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
@@ -201,7 +201,6 @@ static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev)
 {
 	struct qcom_apq8064_sata_phy *phy;
 	struct device *dev = &pdev->dev;
-	struct resource *res;
 	struct phy_provider *phy_provider;
 	struct phy *generic_phy;
 	int ret;
@@ -210,8 +209,7 @@ static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev)
 	if (!phy)
 		return -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	phy->mmio = devm_ioremap_resource(dev, res);
+	phy->mmio = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(phy->mmio))
 		return PTR_ERR(phy->mmio);


--- a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
@@ -95,7 +95,6 @@ MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match);
 static int ipq4019_usb_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct resource *res;
 	struct phy_provider *phy_provider;
 	struct ipq4019_usb_phy *phy;

@@ -104,8 +103,7 @@ static int ipq4019_usb_phy_probe(struct platform_device *pdev)
 		return -ENOMEM;

 	phy->dev = &pdev->dev;
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	phy->base = devm_ioremap_resource(&pdev->dev, res);
+	phy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(phy->base)) {
 		dev_err(dev, "failed to remap register memory\n");
 		return PTR_ERR(phy->base);

--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
@@ -128,7 +128,6 @@ static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev)
 {
 	struct qcom_ipq806x_sata_phy *phy;
 	struct device *dev = &pdev->dev;
-	struct resource *res;
 	struct phy_provider *phy_provider;
 	struct phy *generic_phy;
 	int ret;
@@ -137,8 +136,7 @@ static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev)
 	if (!phy)
 		return -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	phy->mmio = devm_ioremap_resource(dev, res);
+	phy->mmio = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(phy->mmio))
 		return PTR_ERR(phy->mmio);


--- a/drivers/phy/qualcomm/phy-qcom-pcie2.c
+++ b/drivers/phy/qualcomm/phy-qcom-pcie2.c
@@ -250,7 +250,6 @@ static int qcom_pcie2_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
 	struct qcom_phy *qphy;
-	struct resource *res;
 	struct device *dev = &pdev->dev;
 	struct phy *phy;
 	int ret;
@@ -260,9 +259,7 @@ static int qcom_pcie2_phy_probe(struct platform_device *pdev)
 		return -ENOMEM;

 	qphy->dev = dev;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	qphy->base = devm_ioremap_resource(dev, res);
+	qphy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(qphy->base))
 		return PTR_ERR(qphy->base);


--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -403,6 +403,7 @@
 #define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0		0x028
 #define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1		0x030
 #define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1		0x034
+#define QSERDES_V4_COM_CLK_ENABLE1			0x048
 #define QSERDES_V4_COM_SYSCLK_BUF_ENABLE		0x050
 #define QSERDES_V4_COM_PLL_IVCO				0x058
 #define QSERDES_V4_COM_CMN_IPTRIM			0x060
@@ -432,6 +433,7 @@
 #define QSERDES_V4_COM_VCO_TUNE1_MODE1			0x118
 #define QSERDES_V4_COM_VCO_TUNE2_MODE1			0x11c
 #define QSERDES_V4_COM_VCO_TUNE_INITVAL2		0x124
+#define QSERDES_V4_COM_CLK_SELECT			0x154
 #define QSERDES_V4_COM_HSCLK_SEL			0x158
 #define QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL		0x15c
 #define QSERDES_V4_COM_CORECLK_DIV_MODE1		0x16c
@@ -471,12 +473,14 @@
 #define QSERDES_V4_RX_UCDR_SB2_GAIN1			0x054
 #define QSERDES_V4_RX_UCDR_SB2_GAIN2			0x058
 #define QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE			0x060
+#define QSERDES_V4_RX_RCLK_AUXDATA_SEL			0x064
 #define QSERDES_V4_RX_AC_JTAG_ENABLE			0x068
 #define QSERDES_V4_RX_AC_JTAG_MODE			0x078
 #define QSERDES_V4_RX_RX_TERM_BW			0x080
 #define QSERDES_V4_RX_VGA_CAL_CNTRL1			0x0d4
 #define QSERDES_V4_RX_VGA_CAL_CNTRL2			0x0d8
 #define QSERDES_V4_RX_GM_CAL				0x0dc
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1		0x0e8
 #define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2		0x0ec
 #define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3		0x0f0
 #define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4		0x0f4
@@ -485,6 +489,7 @@
 #define QSERDES_V4_RX_RX_IDAC_MEASURE_TIME		0x100
 #define QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1	0x110
 #define QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2		0x114
+#define QSERDES_V4_RX_SIGDET_ENABLES			0x118
 #define QSERDES_V4_RX_SIGDET_CNTRL			0x11c
 #define QSERDES_V4_RX_SIGDET_LVL			0x120
 #define QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL		0x124
@@ -806,4 +811,17 @@
 #define QPHY_V4_PCS_MISC_TYPEC_STATUS			0x10
 #define QPHY_V4_PCS_MISC_PLACEHOLDER_STATUS		0x14

+/* Only for QMP V4 PHY - PCS_PCIE registers (same as PCS_MISC?) */
+#define QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2		0x0c
+#define QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4		0x14
+#define QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE		0x1c
+#define QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L	0x40
+#define QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L	0x48
+#define QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1		0x50
+#define QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS		0x90
+#define QPHY_V4_PCS_PCIE_EQ_CONFIG2			0xa4
+#define QPHY_V4_PCS_PCIE_PRESET_P6_P7_PRE		0xb4
+#define QPHY_V4_PCS_PCIE_PRESET_P10_PRE			0xbc
+#define QPHY_V4_PCS_PCIE_PRESET_P10_POST		0xe0
+
 #endif
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -844,7 +844,6 @@ static int qusb2_phy_probe(struct platform_device *pdev)
 	struct qusb2_phy *qphy;
 	struct phy_provider *phy_provider;
 	struct phy *generic_phy;
-	struct resource *res;
 	int ret, i;
 	int num;
 	u32 value;
@@ -855,8 +854,7 @@ static int qusb2_phy_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	or = &qphy->overrides;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	qphy->base = devm_ioremap_resource(dev, res);
+	qphy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(qphy->base))
 		return PTR_ERR(qphy->base);


--- a/drivers/phy/ralink/Kconfig
+++ b/drivers/phy/ralink/Kconfig
@@ -2,6 +2,14 @@
 #
 # PHY drivers for Ralink platforms.
 #
+config PHY_MT7621_PCI
+	tristate "MediaTek MT7621 PCI PHY Driver"
+	depends on RALINK && OF
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver,
+
 config PHY_RALINK_USB
 	tristate "Ralink USB PHY driver"
 	depends on RALINK || COMPILE_TEST

--- a/drivers/phy/ralink/Makefile
+++ b/drivers/phy/ralink/Makefile
 # SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_PHY_MT7621_PCI)	+= phy-mt7621-pci.o
 obj-$(CONFIG_PHY_RALINK_USB)	+= phy-ralink-usb.o
--- a/drivers/staging/mt7621-pci-phy/pci-mt7621-phy.c
+++ b/drivers/staging/mt7621-pci-phy/pci-mt7621-phy.c
@@ -5,6 +5,7 @@
 */

 #include <dt-bindings/phy/phy.h>
+#include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
@@ -23,12 +24,10 @@
 #define RG_P0_TO_P1_WIDTH			0x100
 #define RG_PE1_H_LCDDS_REG			0x49c
 #define RG_PE1_H_LCDDS_PCW			GENMASK(30, 0)
-#define RG_PE1_H_LCDDS_PCW_VAL(x)		((0x7fffffff & (x)) << 0)

 #define RG_PE1_FRC_H_XTAL_REG			0x400
 #define RG_PE1_FRC_H_XTAL_TYPE			BIT(8)
 #define RG_PE1_H_XTAL_TYPE			GENMASK(10, 9)
-#define RG_PE1_H_XTAL_TYPE_VAL(x)		((0x3 & (x)) << 9)

 #define RG_PE1_FRC_PHY_REG			0x000
 #define RG_PE1_FRC_PHY_EN			BIT(4)
@@ -36,47 +35,34 @@

 #define RG_PE1_H_PLL_REG			0x490
 #define RG_PE1_H_PLL_BC				GENMASK(23, 22)
-#define RG_PE1_H_PLL_BC_VAL(x)			((0x3 & (x)) << 22)
 #define RG_PE1_H_PLL_BP				GENMASK(21, 18)
-#define RG_PE1_H_PLL_BP_VAL(x)			((0xf & (x)) << 18)
 #define RG_PE1_H_PLL_IR				GENMASK(15, 12)
-#define RG_PE1_H_PLL_IR_VAL(x)			((0xf & (x)) << 12)
 #define RG_PE1_H_PLL_IC				GENMASK(11, 8)
-#define RG_PE1_H_PLL_IC_VAL(x)			((0xf & (x)) << 8)
 #define RG_PE1_H_PLL_PREDIV			GENMASK(7, 6)
-#define RG_PE1_H_PLL_PREDIV_VAL(x)		((0x3 & (x)) << 6)
 #define RG_PE1_PLL_DIVEN			GENMASK(3, 1)
-#define RG_PE1_PLL_DIVEN_VAL(x)			((0x7 & (x)) << 1)

 #define RG_PE1_H_PLL_FBKSEL_REG			0x4bc
 #define RG_PE1_H_PLL_FBKSEL			GENMASK(5, 4)
-#define RG_PE1_H_PLL_FBKSEL_VAL(x)		((0x3 & (x)) << 4)

 #define	RG_PE1_H_LCDDS_SSC_PRD_REG		0x4a4
 #define RG_PE1_H_LCDDS_SSC_PRD			GENMASK(15, 0)
-#define RG_PE1_H_LCDDS_SSC_PRD_VAL(x)		((0xffff & (x)) << 0)

 #define RG_PE1_H_LCDDS_SSC_DELTA_REG		0x4a8
 #define RG_PE1_H_LCDDS_SSC_DELTA		GENMASK(11, 0)
-#define RG_PE1_H_LCDDS_SSC_DELTA_VAL(x)		((0xfff & (x)) << 0)
 #define RG_PE1_H_LCDDS_SSC_DELTA1		GENMASK(27, 16)
-#define RG_PE1_H_LCDDS_SSC_DELTA1_VAL(x)	((0xff & (x)) << 16)

 #define RG_PE1_LCDDS_CLK_PH_INV_REG		0x4a0
 #define RG_PE1_LCDDS_CLK_PH_INV			BIT(5)

 #define RG_PE1_H_PLL_BR_REG			0x4ac
 #define RG_PE1_H_PLL_BR				GENMASK(18, 16)
-#define RG_PE1_H_PLL_BR_VAL(x)			((0x7 & (x)) << 16)

 #define	RG_PE1_MSTCKDIV_REG			0x414
 #define RG_PE1_MSTCKDIV				GENMASK(7, 6)
-#define RG_PE1_MSTCKDIV_VAL(x)			((0x3 & (x)) << 6)

 #define RG_PE1_FRC_MSTCKDIV			BIT(5)

-#define XTAL_MODE_SEL_SHIFT			6
-#define XTAL_MODE_SEL_MASK			0x7
+#define XTAL_MASK				GENMASK(7, 6)

 #define MAX_PHYS	2

@@ -99,28 +85,22 @@ struct mt7621_pci_phy {
 	bool bypass_pipe_rst;
 };

-static inline u32 phy_read(struct mt7621_pci_phy *phy, u32 reg)
-{
-	u32 val;
-
-	regmap_read(phy->regmap, reg, &val);
-
-	return val;
-}
-
-static inline void phy_write(struct mt7621_pci_phy *phy, u32 val, u32 reg)
-{
-	regmap_write(phy->regmap, reg, val);
-}
-
 static inline void mt7621_phy_rmw(struct mt7621_pci_phy *phy,
 				  u32 reg, u32 clr, u32 set)
 {
-	u32 val = phy_read(phy, reg);
+	u32 val;

+	/*
+	 * We cannot use 'regmap_write_bits' here because internally
+	 * 'set' is masked before is set to the value that will be
+	 * written to the register. That way results in no reliable
+	 * pci setup. Avoid to mask 'set' before set value to 'val'
+	 * completely avoid the problem.
+	 */
+	regmap_read(phy->regmap, reg, &val);
 	val &= ~clr;
 	val |= set;
-	phy_write(phy, val, reg);
+	regmap_write(phy->regmap, reg, val);
 }

 static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy)
@@ -141,18 +121,18 @@ static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)
 	struct device *dev = phy->dev;
 	u32 xtal_mode;

-	xtal_mode = (rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0)
-		     >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK;
+	xtal_mode = FIELD_GET(XTAL_MASK, rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0));

 	/* Set PCIe Port PHY to disable SSC */
 	/* Debug Xtal Type */
 	mt7621_phy_rmw(phy, RG_PE1_FRC_H_XTAL_REG,
 		       RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE,
-		       RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE_VAL(0x00));
+		       RG_PE1_FRC_H_XTAL_TYPE |
+		       FIELD_PREP(RG_PE1_H_XTAL_TYPE, 0x00));

 	/* disable port */
-	mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG,
-		       RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
+	mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG, RG_PE1_PHY_EN,
+		       RG_PE1_FRC_PHY_EN);

 	if (phy->has_dual_port) {
 		mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
@@ -161,39 +141,42 @@ static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)

 	if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */
 		/* Set Pre-divider ratio (for host mode) */
-		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG,
-			       RG_PE1_H_PLL_PREDIV,
-			       RG_PE1_H_PLL_PREDIV_VAL(0x01));
-		dev_info(dev, "Xtal is 40MHz\n");
+		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
+			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x01));
+
+		dev_dbg(dev, "Xtal is 40MHz\n");
 	} else if (xtal_mode >= 6) { /* 25MHz Xal */
-		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG,
-			       RG_PE1_H_PLL_PREDIV,
-			       RG_PE1_H_PLL_PREDIV_VAL(0x00));
+		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
+			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
+
 		/* Select feedback clock */
 		mt7621_phy_rmw(phy, RG_PE1_H_PLL_FBKSEL_REG,
 			       RG_PE1_H_PLL_FBKSEL,
-			       RG_PE1_H_PLL_FBKSEL_VAL(0x01));
+			       FIELD_PREP(RG_PE1_H_PLL_FBKSEL, 0x01));
+
 		/* DDS NCPO PCW (for host mode) */
 		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
 			       RG_PE1_H_LCDDS_SSC_PRD,
-			       RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18000000));
+			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x00));
+
 		/* DDS SSC dither period control */
 		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
 			       RG_PE1_H_LCDDS_SSC_PRD,
-			       RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18d));
+			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x18d));
+
 		/* DDS SSC dither amplitude control */
 		mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_DELTA_REG,
 			       RG_PE1_H_LCDDS_SSC_DELTA |
 			       RG_PE1_H_LCDDS_SSC_DELTA1,
-			       RG_PE1_H_LCDDS_SSC_DELTA_VAL(0x4a) |
-			       RG_PE1_H_LCDDS_SSC_DELTA1_VAL(0x4a));
-		dev_info(dev, "Xtal is 25MHz\n");
+			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA, 0x4a) |
+			       FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA1, 0x4a));
+
+		dev_dbg(dev, "Xtal is 25MHz\n");
 	} else { /* 20MHz Xtal */
-		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG,
-			       RG_PE1_H_PLL_PREDIV,
-			       RG_PE1_H_PLL_PREDIV_VAL(0x00));
+		mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
+			       FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));

-		dev_info(dev, "Xtal is 20MHz\n");
+		dev_dbg(dev, "Xtal is 20MHz\n");
 	}

 	/* DDS clock inversion */
@@ -204,18 +187,21 @@ static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)
 	mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG,
 		       RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR |
 		       RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN,
-		       RG_PE1_H_PLL_BC_VAL(0x02) | RG_PE1_H_PLL_BP_VAL(0x06) |
-		       RG_PE1_H_PLL_IR_VAL(0x02) | RG_PE1_H_PLL_IC_VAL(0x01) |
-		       RG_PE1_PLL_DIVEN_VAL(0x02));
+		       FIELD_PREP(RG_PE1_H_PLL_BC, 0x02) |
+		       FIELD_PREP(RG_PE1_H_PLL_BP, 0x06) |
+		       FIELD_PREP(RG_PE1_H_PLL_IR, 0x02) |
+		       FIELD_PREP(RG_PE1_H_PLL_IC, 0x01) |
+		       FIELD_PREP(RG_PE1_PLL_DIVEN, 0x02));

-	mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG,
-		       RG_PE1_H_PLL_BR, RG_PE1_H_PLL_BR_VAL(0x00));
+	mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG, RG_PE1_H_PLL_BR,
+		       FIELD_PREP(RG_PE1_H_PLL_BR, 0x00));

 	if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */
 		/* set force mode enable of da_pe1_mstckdiv */
 		mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG,
 			       RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV,
-			       RG_PE1_MSTCKDIV_VAL(0x01) | RG_PE1_FRC_MSTCKDIV);
+			       FIELD_PREP(RG_PE1_MSTCKDIV, 0x01) |
+			       RG_PE1_FRC_MSTCKDIV);
 	}
 }

@@ -309,7 +295,6 @@ static int mt7621_pci_phy_probe(struct platform_device *pdev)
 	const struct soc_device_attribute *attr;
 	struct phy_provider *provider;
 	struct mt7621_pci_phy *phy;
-	struct resource *res;

 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy)
@@ -322,13 +307,7 @@ static int mt7621_pci_phy_probe(struct platform_device *pdev)
 	phy->dev = dev;
 	platform_set_drvdata(pdev, phy);

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "failed to get address resource\n");
-		return -ENXIO;
-	}
-
-	phy->port_base = devm_ioremap_resource(dev, res);
+	phy->port_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(phy->port_base)) {
 		dev_err(dev, "failed to remap phy regs\n");
 		return PTR_ERR(phy->port_base);
@@ -356,7 +335,7 @@ static const struct of_device_id mt7621_pci_phy_ids[] = {
 	{ .compatible = "mediatek,mt7621-pci-phy" },
 	{},
 };
-MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
+MODULE_DEVICE_TABLE(of, mt7621_pci_phy_ids);

 static struct platform_driver mt7621_pci_phy_driver = {
 	.probe = mt7621_pci_phy_probe,

--- a/drivers/phy/ralink/phy-ralink-usb.c
+++ b/drivers/phy/ralink/phy-ralink-usb.c
@@ -170,7 +170,6 @@ MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match);
 static int ralink_usb_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct resource *res;
 	struct phy_provider *phy_provider;
 	const struct of_device_id *match;
 	struct ralink_usb_phy *phy;
@@ -194,8 +193,7 @@ static int ralink_usb_phy_probe(struct platform_device *pdev)

 	/* The MT7628 and MT7688 require extra setup of PHY registers. */
 	if (of_device_is_compatible(dev->of_node, "mediatek,mt7628-usbphy")) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		phy->base = devm_ioremap_resource(&pdev->dev, res);
+		phy->base = devm_platform_ioremap_resource(pdev, 0);
 		if (IS_ERR(phy->base)) {
 			dev_err(dev, "failed to remap register memory\n");
 			return PTR_ERR(phy->base);

--- a/drivers/phy/renesas/phy-rcar-gen2.c
+++ b/drivers/phy/renesas/phy-rcar-gen2.c
@@ -339,7 +339,6 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
 	struct rcar_gen2_phy_driver *drv;
 	struct phy_provider *provider;
 	struct device_node *np;
-	struct resource *res;
 	void __iomem *base;
 	struct clk *clk;
 	const struct rcar_gen2_phy_data *data;
@@ -357,8 +356,7 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(clk);
 	}

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);


--- a/drivers/phy/renesas/phy-rcar-gen3-pcie.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
@@ -76,7 +76,6 @@ static int rcar_gen3_phy_pcie_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct phy_provider *provider;
 	struct rcar_gen3_phy *phy;
-	struct resource *res;
 	void __iomem *base;
 	int error;

@@ -86,8 +85,7 @@ static int rcar_gen3_phy_pcie_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
+	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);


--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -611,7 +611,6 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct rcar_gen3_chan *channel;
 	struct phy_provider *provider;
-	struct resource *res;
 	const struct phy_ops *phy_usb2_ops;
 	int ret = 0, i;

@@ -624,8 +623,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	if (!channel)
 		return -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	channel->base = devm_ioremap_resource(dev, res);
+	channel->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(channel->base))
 		return PTR_ERR(channel->base);

@@ -656,8 +654,10 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	 */
 	pm_runtime_enable(dev);
 	phy_usb2_ops = of_device_get_match_data(dev);
-	if (!phy_usb2_ops)
-		return -EINVAL;
+	if (!phy_usb2_ops) {
+		ret = -EINVAL;
+		goto error;
+	}

 	mutex_init(&channel->lock);
 	for (i = 0; i < NUM_OF_PHYS; i++) {

--- a/drivers/phy/renesas/phy-rcar-gen3-usb3.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb3.c
@@ -133,7 +133,6 @@ static int rcar_gen3_phy_usb3_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct rcar_gen3_usb3 *r;
 	struct phy_provider *provider;
-	struct resource *res;
 	int ret = 0;
 	struct clk *clk;

@@ -146,8 +145,7 @@ static int rcar_gen3_phy_usb3_probe(struct platform_device *pdev)
 	if (!r)
 		return -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	r->base = devm_ioremap_resource(dev, res);
+	r->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(r->base))
 		return PTR_ERR(r->base);


--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -32,6 +32,7 @@ config PHY_ROCKCHIP_INNO_HDMI
 	tristate "Rockchip INNO HDMI PHY Driver"
 	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
 	depends on COMMON_CLK
+	depends on HAS_IOMEM
 	select GENERIC_PHY
 	help
 	  Enable this to support the Rockchip Innosilicon HDMI PHY.

--- a/drivers/phy/rockchip/phy-rockchip-emmc.c
+++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
@@ -65,8 +65,14 @@
 #define PHYCTRL_OTAPDLYENA		0x1
 #define PHYCTRL_OTAPDLYENA_MASK		0x1
 #define PHYCTRL_OTAPDLYENA_SHIFT	0xb
+#define PHYCTRL_OTAPDLYSEL_DEFAULT	0x4
+#define PHYCTRL_OTAPDLYSEL_MAXVALUE	0xf
 #define PHYCTRL_OTAPDLYSEL_MASK		0xf
 #define PHYCTRL_OTAPDLYSEL_SHIFT	0x7
+#define PHYCTRL_REN_STRB_DISABLE	0x0
+#define PHYCTRL_REN_STRB_ENABLE		0x1
+#define PHYCTRL_REN_STRB_MASK		0x1
+#define PHYCTRL_REN_STRB_SHIFT		0x9

 #define PHYCTRL_IS_CALDONE(x) \
 	((((x) >> PHYCTRL_CALDONE_SHIFT) & \
@@ -80,6 +86,8 @@ struct rockchip_emmc_phy {
 	struct regmap	*reg_base;
 	struct clk	*emmcclk;
 	unsigned int drive_impedance;
+	unsigned int enable_strobe_pulldown;
+	unsigned int output_tapdelay_select;
 };

 static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
@@ -291,10 +299,17 @@ static int rockchip_emmc_phy_power_on(struct phy *phy)
 	/* Output tap delay */
 	regmap_write(rk_phy->reg_base,
 		     rk_phy->reg_offset + GRF_EMMCPHY_CON0,
-		     HIWORD_UPDATE(4,
+		     HIWORD_UPDATE(rk_phy->output_tapdelay_select,
 				   PHYCTRL_OTAPDLYSEL_MASK,
 				   PHYCTRL_OTAPDLYSEL_SHIFT));

+	/* Internal pull-down for strobe line */
+	regmap_write(rk_phy->reg_base,
+		     rk_phy->reg_offset + GRF_EMMCPHY_CON2,
+		     HIWORD_UPDATE(rk_phy->enable_strobe_pulldown,
+				   PHYCTRL_REN_STRB_MASK,
+				   PHYCTRL_REN_STRB_SHIFT));
+
 	/* Power up emmc phy analog blocks */
 	return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_ON);
 }
@@ -359,10 +374,22 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
 	rk_phy->reg_offset = reg_offset;
 	rk_phy->reg_base = grf;
 	rk_phy->drive_impedance = PHYCTRL_DR_50OHM;
+	rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_DISABLE;
+	rk_phy->output_tapdelay_select = PHYCTRL_OTAPDLYSEL_DEFAULT;

 	if (!of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val))
 		rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val);

+	if (of_property_read_bool(dev->of_node, "enable-strobe-pulldown"))
+		rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_ENABLE;
+
+	if (!of_property_read_u32(dev->of_node, "output-tapdelay-select", &val)) {
+		if (val <= PHYCTRL_OTAPDLYSEL_MAXVALUE)
+			rk_phy->output_tapdelay_select = val;
+		else
+			dev_err(dev, "output-tapdelay-select exceeds limit, apply default\n");
+	}
+
 	generic_phy = devm_phy_create(dev, dev->of_node, &ops);
 	if (IS_ERR(generic_phy)) {
 		dev_err(dev, "failed to create PHY\n");

--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -1144,7 +1144,6 @@ static int inno_hdmi_phy_probe(struct platform_device *pdev)
 {
 	struct inno_hdmi_phy *inno;
 	struct phy_provider *phy_provider;
-	struct resource *res;
 	void __iomem *regs;
 	int ret;

@@ -1158,8 +1157,7 @@ static int inno_hdmi_phy_probe(struct platform_device *pdev)
 	if (!inno->plat_data || !inno->plat_data->ops)
 		return -EINVAL;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	regs = devm_ioremap_resource(inno->dev, res);
+	regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(regs))
 		return PTR_ERR(regs);


--- a/drivers/phy/samsung/phy-exynos-pcie.c
+++ b/drivers/phy/samsung/phy-exynos-pcie.c
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -829,7 +829,6 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
 	struct device_node *node = dev->of_node;
 	struct exynos5_usbdrd_phy *phy_drd;
 	struct phy_provider *phy_provider;
-	struct resource *res;
 	const struct exynos5_usbdrd_phy_drvdata *drv_data;
 	struct regmap *reg_pmu;
 	u32 pmu_offset;
@@ -843,8 +842,7 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
 	dev_set_drvdata(dev, phy_drd);
 	phy_drd->dev = dev;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	phy_drd->reg_phy = devm_ioremap_resource(dev, res);
+	phy_drd->reg_phy = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(phy_drd->reg_phy))
 		return PTR_ERR(phy_drd->reg_phy);


--- a/drivers/phy/samsung/phy-exynos5250-sata.c
+++ b/drivers/phy/samsung/phy-exynos5250-sata.c
@@ -162,7 +162,6 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
 {
 	struct exynos_sata_phy *sata_phy;
 	struct device *dev = &pdev->dev;
-	struct resource *res;
 	struct phy_provider *phy_provider;
 	struct device_node *node;
 	int ret = 0;
@@ -171,9 +170,7 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
 	if (!sata_phy)
 		return -ENOMEM;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	sata_phy->regs = devm_ioremap_resource(dev, res);
+	sata_phy->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(sata_phy->regs))
 		return PTR_ERR(sata_phy->regs);


--- a/drivers/phy/samsung/phy-exynos5250-usb2.c
+++ b/drivers/phy/samsung/phy-exynos5250-usb2.c
@@ -117,9 +117,9 @@

 /* Isolation, configured in the power management unit */
 #define EXYNOS_5250_USB_ISOL_OTG_OFFSET		0x704
-#define EXYNOS_5250_USB_ISOL_OTG		BIT(0)
 #define EXYNOS_5250_USB_ISOL_HOST_OFFSET	0x708
-#define EXYNOS_5250_USB_ISOL_HOST		BIT(0)
+#define EXYNOS_5420_USB_ISOL_HOST_OFFSET	0x70C
+#define EXYNOS_5250_USB_ISOL_ENABLE		BIT(0)

 /* Mode swtich register */
 #define EXYNOS_5250_MODE_SWITCH_OFFSET		0x230
@@ -132,7 +132,6 @@ enum exynos4x12_phy_id {
 	EXYNOS5250_HOST,
 	EXYNOS5250_HSIC0,
 	EXYNOS5250_HSIC1,
-	EXYNOS5250_NUM_PHYS,
 };

 /*
@@ -176,20 +175,19 @@ static void exynos5250_isol(struct samsung_usb2_phy_instance *inst, bool on)
 {
 	struct samsung_usb2_phy_driver *drv = inst->drv;
 	u32 offset;
-	u32 mask;
+	u32 mask = EXYNOS_5250_USB_ISOL_ENABLE;

-	switch (inst->cfg->id) {
-	case EXYNOS5250_DEVICE:
+	if (drv->cfg == &exynos5250_usb2_phy_config &&
+	    inst->cfg->id == EXYNOS5250_DEVICE)
 		offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET;
-		mask = EXYNOS_5250_USB_ISOL_OTG;
-		break;
-	case EXYNOS5250_HOST:
+	else if (drv->cfg == &exynos5250_usb2_phy_config &&
+		 inst->cfg->id == EXYNOS5250_HOST)
 		offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET;
-		mask = EXYNOS_5250_USB_ISOL_HOST;
-		break;
-	default:
+	else if (drv->cfg == &exynos5420_usb2_phy_config &&
+		 inst->cfg->id == EXYNOS5250_HOST)
+		offset = EXYNOS_5420_USB_ISOL_HOST_OFFSET;
+	else
 		return;
-	}

 	regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
 }
@@ -390,9 +388,31 @@ static const struct samsung_usb2_common_phy exynos5250_phys[] = {
 	},
 };

+static const struct samsung_usb2_common_phy exynos5420_phys[] = {
+	{
+		.label		= "host",
+		.id		= EXYNOS5250_HOST,
+		.power_on	= exynos5250_power_on,
+		.power_off	= exynos5250_power_off,
+	},
+	{
+		.label		= "hsic",
+		.id		= EXYNOS5250_HSIC0,
+		.power_on	= exynos5250_power_on,
+		.power_off	= exynos5250_power_off,
+	},
+};
+
 const struct samsung_usb2_phy_config exynos5250_usb2_phy_config = {
 	.has_mode_switch	= 1,
-	.num_phys		= EXYNOS5250_NUM_PHYS,
+	.num_phys		= ARRAY_SIZE(exynos5250_phys),
 	.phys			= exynos5250_phys,
 	.rate_to_clk		= exynos5250_rate_to_clk,
 };
+
+const struct samsung_usb2_phy_config exynos5420_usb2_phy_config = {
+	.has_mode_switch	= 1,
+	.num_phys		= ARRAY_SIZE(exynos5420_phys),
+	.phys			= exynos5420_phys,
+	.rate_to_clk		= exynos5250_rate_to_clk,
+};
--- a/drivers/phy/samsung/phy-samsung-usb2.c
+++ b/drivers/phy/samsung/phy-samsung-usb2.c
@@ -127,6 +127,10 @@ static const struct of_device_id samsung_usb2_phy_of_match[] = {
 		.compatible = "samsung,exynos5250-usb2-phy",
 		.data = &exynos5250_usb2_phy_config,
 	},
+	{
+		.compatible = "samsung,exynos5420-usb2-phy",
+		.data = &exynos5420_usb2_phy_config,
+	},
 #endif
 #ifdef CONFIG_PHY_S5PV210_USB2
 	{
@@ -143,7 +147,6 @@ static int samsung_usb2_phy_probe(struct platform_device *pdev)
 	const struct samsung_usb2_phy_config *cfg;
 	struct device *dev = &pdev->dev;
 	struct phy_provider *phy_provider;
-	struct resource *mem;
 	struct samsung_usb2_phy_driver *drv;
 	int i, ret;

@@ -167,8 +170,7 @@ static int samsung_usb2_phy_probe(struct platform_device *pdev)
 	drv->cfg = cfg;
 	drv->dev = dev;

-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	drv->reg_phy = devm_ioremap_resource(dev, mem);
+	drv->reg_phy = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(drv->reg_phy)) {
 		dev_err(dev, "Failed to map register memory (phy)\n");
 		return PTR_ERR(drv->reg_phy);

--- a/drivers/phy/samsung/phy-samsung-usb2.h
+++ b/drivers/phy/samsung/phy-samsung-usb2.h
@@ -66,5 +66,6 @@ extern const struct samsung_usb2_phy_config exynos3250_usb2_phy_config;
 extern const struct samsung_usb2_phy_config exynos4210_usb2_phy_config;
 extern const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config;
 extern const struct samsung_usb2_phy_config exynos5250_usb2_phy_config;
+extern const struct samsung_usb2_phy_config exynos5420_usb2_phy_config;
 extern const struct samsung_usb2_phy_config s5pv210_usb2_phy_config;
 #endif
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -311,7 +311,6 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
 	struct stm32_usbphyc *usbphyc;
 	struct device *dev = &pdev->dev;
 	struct device_node *child, *np = dev->of_node;
-	struct resource *res;
 	struct phy_provider *phy_provider;
 	u32 version;
 	int ret, port = 0;
@@ -322,17 +321,13 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
 	usbphyc->dev = dev;
 	dev_set_drvdata(dev, usbphyc);

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	usbphyc->base = devm_ioremap_resource(dev, res);
+	usbphyc->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(usbphyc->base))
 		return PTR_ERR(usbphyc->base);

 	usbphyc->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(usbphyc->clk)) {
-		ret = PTR_ERR(usbphyc->clk);
-		dev_err(dev, "clk get failed: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(usbphyc->clk))
+		return dev_err_probe(dev, PTR_ERR(usbphyc->clk), "clk get_failed\n");

 	ret = clk_prepare_enable(usbphyc->clk);
 	if (ret) {
@@ -345,6 +340,10 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
 		reset_control_assert(usbphyc->rst);
 		udelay(2);
 		reset_control_deassert(usbphyc->rst);
+	} else {
+		ret = PTR_ERR(usbphyc->rst);
+		if (ret == -EPROBE_DEFER)
+			goto clk_disable;
 	}

 	usbphyc->switch_setup = -EINVAL;

--- a/drivers/phy/tegra/phy-tegra194-p2u.c
+++ b/drivers/phy/tegra/phy-tegra194-p2u.c
@@ -72,14 +72,12 @@ static int tegra_p2u_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct phy *generic_phy;
 	struct tegra_p2u *phy;
-	struct resource *res;

 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy)
 		return -ENOMEM;

-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctl");
-	phy->base = devm_ioremap_resource(dev, res);
+	phy->base = devm_platform_ioremap_resource_byname(pdev, "ctl");
 	if (IS_ERR(phy->base))
 		return PTR_ERR(phy->base);


--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -146,7 +146,7 @@ static void tegra_xusb_pad_release(struct device *dev)
 	pad->soc->ops->remove(pad);
 }

-static struct device_type tegra_xusb_pad_type = {
+static const struct device_type tegra_xusb_pad_type = {
 	.release = tegra_xusb_pad_release,
 };

@@ -513,7 +513,7 @@ static void tegra_xusb_port_release(struct device *dev)
 		port->ops->release(port);
 }

-static struct device_type tegra_xusb_port_type = {
+static const struct device_type tegra_xusb_port_type = {
 	.release = tegra_xusb_port_release,
 };

@@ -688,7 +688,7 @@ static int tegra_xusb_setup_usb_role_switch(struct tegra_xusb_port *port)
 	 * reference to retrieve usb-phy details.
 	 */
 	port->usb_phy.dev = &lane->pad->lanes[port->index]->dev;
-	port->usb_phy.dev->driver = port->padctl->dev->driver;
+	port->usb_phy.dev->driver = port->dev.driver;
 	port->usb_phy.otg->usb_phy = &port->usb_phy;
 	port->usb_phy.otg->set_peripheral = tegra_xusb_set_peripheral;
 	port->usb_phy.otg->set_host = tegra_xusb_set_host;
@@ -1148,7 +1148,6 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 	const struct tegra_xusb_padctl_soc *soc;
 	struct tegra_xusb_padctl *padctl;
 	const struct of_device_id *match;
-	struct resource *res;
 	int err;

 	/* for backwards compatibility with old device trees */
@@ -1173,8 +1172,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&padctl->pads);
 	mutex_init(&padctl->lock);

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	padctl->regs = devm_ioremap_resource(&pdev->dev, res);
+	padctl->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(padctl->regs)) {
 		err = PTR_ERR(padctl->regs);
 		goto remove;
@@ -1200,7 +1198,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 	err = devm_regulator_bulk_get(&pdev->dev, padctl->soc->num_supplies,
 				      padctl->supplies);
 	if (err < 0) {
-		dev_err(&pdev->dev, "failed to get regulators: %d\n", err);
+		dev_err_probe(&pdev->dev, err, "failed to get regulators\n");
 		goto remove;
 	}


--- a/drivers/phy/ti/phy-omap-control.c
+++ b/drivers/phy/ti/phy-omap-control.c
@@ -268,7 +268,6 @@ MODULE_DEVICE_TABLE(of, omap_control_phy_id_table);

 static int omap_control_phy_probe(struct platform_device *pdev)
 {
-	struct resource	*res;
 	const struct of_device_id *of_id;
 	struct omap_control_phy *control_phy;

@@ -285,16 +284,13 @@ static int omap_control_phy_probe(struct platform_device *pdev)
 	control_phy->type = *(enum omap_control_phy_type *)of_id->data;

 	if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-			"otghs_control");
-		control_phy->otghs_control = devm_ioremap_resource(
-			&pdev->dev, res);
+		control_phy->otghs_control =
+			devm_platform_ioremap_resource_byname(pdev, "otghs_control");
 		if (IS_ERR(control_phy->otghs_control))
 			return PTR_ERR(control_phy->otghs_control);
 	} else {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-				"power");
-		control_phy->power = devm_ioremap_resource(&pdev->dev, res);
+		control_phy->power =
+			devm_platform_ioremap_resource_byname(pdev, "power");
 		if (IS_ERR(control_phy->power)) {
 			dev_err(&pdev->dev, "Couldn't get power register\n");
 			return PTR_ERR(control_phy->power);
@@ -312,9 +308,8 @@ static int omap_control_phy_probe(struct platform_device *pdev)
 	}

 	if (control_phy->type == OMAP_CTRL_TYPE_PCIE) {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-						   "pcie_pcs");
-		control_phy->pcie_pcs = devm_ioremap_resource(&pdev->dev, res);
+		control_phy->pcie_pcs =
+			devm_platform_ioremap_resource_byname(pdev, "pcie_pcs");
 		if (IS_ERR(control_phy->pcie_pcs))
 			return PTR_ERR(control_phy->pcie_pcs);
 	}

--- a/drivers/phy/ti/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -366,7 +366,6 @@ static int omap_usb2_probe(struct platform_device *pdev)
 {
 	struct omap_usb	*phy;
 	struct phy *generic_phy;
-	struct resource *res;
 	struct phy_provider *phy_provider;
 	struct usb_otg *otg;
 	struct device_node *node = pdev->dev.of_node;
@@ -403,8 +402,7 @@ static int omap_usb2_probe(struct platform_device *pdev)

 	omap_usb2_init_errata(phy);

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	phy->phy_base = devm_ioremap_resource(&pdev->dev, res);
+	phy->phy_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(phy->phy_base))
 		return PTR_ERR(phy->phy_base);


--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -745,35 +745,28 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)

 static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
 {
-	struct resource *res;
 	struct device *dev = phy->dev;
 	struct platform_device *pdev = to_platform_device(dev);

-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-					   "phy_rx");
-	phy->phy_rx = devm_ioremap_resource(dev, res);
+	phy->phy_rx = devm_platform_ioremap_resource_byname(pdev, "phy_rx");
 	if (IS_ERR(phy->phy_rx))
 		return PTR_ERR(phy->phy_rx);

-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-					   "phy_tx");
-	phy->phy_tx = devm_ioremap_resource(dev, res);
+	phy->phy_tx = devm_platform_ioremap_resource_byname(pdev, "phy_tx");

 	return PTR_ERR_OR_ZERO(phy->phy_tx);
 }

 static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
 {
-	struct resource *res;
 	struct device *dev = phy->dev;
 	struct platform_device *pdev = to_platform_device(dev);

 	if (phy->mode == PIPE3_MODE_PCIE)
 		return 0;

-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-					   "pll_ctrl");
-	phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
+	phy->pll_ctrl_base =
+		devm_platform_ioremap_resource_byname(pdev, "pll_ctrl");
 	return PTR_ERR_OR_ZERO(phy->pll_ctrl_base);
 }


--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
--- a/drivers/staging/mt7621-pci-phy/Kconfig
+++ b/drivers/staging/mt7621-pci-phy/Kconfig
--- a/drivers/staging/mt7621-pci-phy/TODO
+++ b/drivers/staging/mt7621-pci-phy/TODO
--- a/drivers/usb/phy/phy-jz4770.c
+++ b/drivers/usb/phy/phy-jz4770.c