Merge tag 'arc-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:

 - unaligned access support for HS cores

 - Removed extra memory barrier around spinlock code

 - HSDK platform updates: enable dmac, reset

 - some more boot logging updates

 - misc minor fixes

* tag 'arc-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  arch: arc: Kconfig: pedantic formatting
  ARCv2: spinlock: remove the extra smp_mb before lock, after unlock
  ARC: unaligned: relax the check for gcc supporting -mno-unaligned-access
  ARC: boot log: cut down on verbosity
  ARCv2: boot log: refurbish HS core/release identification
  arc: hsdk_defconfig: Enable CONFIG_BLK_DEV_RAM
  ARC: u-boot args: check that magic number is correct
  ARC: perf: bpok condition only exists for ARCompact
  ARCv2: Add explcit unaligned access support (and ability to disable too)
  ARCv2: lib: introduce memcpy optimized for unaligned access
  ARC: [plat-hsdk]: Enable AXI DW DMAC support
  ARC: [plat-hsdk]: Add reset controller handle to manage USB reset
  ARC: DTB: [scripted] fix node name and address spelling

arch/arc/Kconfig

@@ -386,6 +386,15 @@ config ARC_HAS_SWAPE
 
 if ISA_ARCV2
 
+config ARC_USE_UNALIGNED_MEM_ACCESS
+	bool "Enable unaligned access in HW"
+	default y
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
+	help
+	  The ARC HS architecture supports unaligned memory access
+	  which is disabled by default. Enable unaligned access in
+	  hardware and use software to use it
+
 config ARC_HAS_LL64
 	bool "Insn: 64bit LDD/STD"
 	help

arch/arc/Makefile

@@ -28,6 +28,12 @@ cflags-$(CONFIG_ARC_HAS_SWAPE)		+= -mswape
 
 ifdef CONFIG_ISA_ARCV2
 
+ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
+cflags-y				+= -munaligned-access
+else
+cflags-y				+= -mno-unaligned-access
+endif
+
 ifndef CONFIG_ARC_HAS_LL64
 cflags-y				+= -mno-ll64
 endif

arch/arc/boot/dts/abilis_tb100.dtsi

@@ -38,7 +38,7 @@ ahb_clk: clkdiv_ahb {
 			clock-div = <6>;
 		};
 
-		iomux: iomux@FF10601c {
+		iomux: iomux@ff10601c {
 			/* Port 1 */
 			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
 				abilis,function = "mis0";
@@ -162,182 +162,182 @@ pctl_gpio_i: pctl-gpio-i {
 			};
 		};
 
-		gpioa: gpio@FF140000 {
+		gpioa: gpio@ff140000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF140000 0x1000>;
+			reg = <0xff140000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <3>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpioa";
 		};
-		gpiob: gpio@FF141000 {
+		gpiob: gpio@ff141000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF141000 0x1000>;
+			reg = <0xff141000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <2>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiob";
 		};
-		gpioc: gpio@FF142000 {
+		gpioc: gpio@ff142000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF142000 0x1000>;
+			reg = <0xff142000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <3>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpioc";
 		};
-		gpiod: gpio@FF143000 {
+		gpiod: gpio@ff143000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF143000 0x1000>;
+			reg = <0xff143000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <2>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiod";
 		};
-		gpioe: gpio@FF144000 {
+		gpioe: gpio@ff144000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF144000 0x1000>;
+			reg = <0xff144000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <3>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpioe";
 		};
-		gpiof: gpio@FF145000 {
+		gpiof: gpio@ff145000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF145000 0x1000>;
+			reg = <0xff145000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <2>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiof";
 		};
-		gpiog: gpio@FF146000 {
+		gpiog: gpio@ff146000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF146000 0x1000>;
+			reg = <0xff146000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <3>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiog";
 		};
-		gpioh: gpio@FF147000 {
+		gpioh: gpio@ff147000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF147000 0x1000>;
+			reg = <0xff147000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <2>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpioh";
 		};
-		gpioi: gpio@FF148000 {
+		gpioi: gpio@ff148000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF148000 0x1000>;
+			reg = <0xff148000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <12>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpioi";
 		};
-		gpioj: gpio@FF149000 {
+		gpioj: gpio@ff149000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF149000 0x1000>;
+			reg = <0xff149000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <32>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpioj";
 		};
-		gpiok: gpio@FF14a000 {
+		gpiok: gpio@ff14a000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF14A000 0x1000>;
+			reg = <0xff14a000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <22>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiok";
 		};
-		gpiol: gpio@FF14b000 {
+		gpiol: gpio@ff14b000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF14B000 0x1000>;
+			reg = <0xff14b000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <4>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiol";
 		};
-		gpiom: gpio@FF14c000 {
+		gpiom: gpio@ff14c000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF14C000 0x1000>;
+			reg = <0xff14c000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <4>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiom";
 		};
-		gpion: gpio@FF14d000 {
+		gpion: gpio@ff14d000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF14D000 0x1000>;
+			reg = <0xff14d000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <5>;

arch/arc/boot/dts/abilis_tb100_dvk.dts

@@ -37,27 +37,27 @@ memory {
 	};
 
 	soc100 {
-		uart@FF100000 {
+		uart@ff100000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&pctl_uart0>;
 		};
-		ethernet@FE100000 {
+		ethernet@fe100000 {
 			phy-mode = "rgmii";
 		};
 
-		i2c0: i2c@FF120000 {
+		i2c0: i2c@ff120000 {
 			i2c-sda-hold-time-ns = <432>;
 		};
-		i2c1: i2c@FF121000 {
+		i2c1: i2c@ff121000 {
 			i2c-sda-hold-time-ns = <432>;
 		};
-		i2c2: i2c@FF122000 {
+		i2c2: i2c@ff122000 {
 			i2c-sda-hold-time-ns = <432>;
 		};
-		i2c3: i2c@FF123000 {
+		i2c3: i2c@ff123000 {
 			i2c-sda-hold-time-ns = <432>;
 		};
-		i2c4: i2c@FF124000 {
+		i2c4: i2c@ff124000 {
 			i2c-sda-hold-time-ns = <432>;
 		};
 

arch/arc/boot/dts/abilis_tb101.dtsi

@@ -38,7 +38,7 @@ ahb_clk: clkdiv_ahb {
 			clock-div = <6>;
 		};
 
-		iomux: iomux@FF10601c {
+		iomux: iomux@ff10601c {
 			/* Port 1 */
 			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
 				abilis,function = "mis0";
@@ -171,182 +171,182 @@ pctl_gpio_i: pctl-gpio-i {
 			};
 		};
 
-		gpioa: gpio@FF140000 {
+		gpioa: gpio@ff140000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF140000 0x1000>;
+			reg = <0xff140000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <3>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpioa";
 		};
-		gpiob: gpio@FF141000 {
+		gpiob: gpio@ff141000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF141000 0x1000>;
+			reg = <0xff141000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <2>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiob";
 		};
-		gpioc: gpio@FF142000 {
+		gpioc: gpio@ff142000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF142000 0x1000>;
+			reg = <0xff142000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <3>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpioc";
 		};
-		gpiod: gpio@FF143000 {
+		gpiod: gpio@ff143000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF143000 0x1000>;
+			reg = <0xff143000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <2>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiod";
 		};
-		gpioe: gpio@FF144000 {
+		gpioe: gpio@ff144000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF144000 0x1000>;
+			reg = <0xff144000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <3>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpioe";
 		};
-		gpiof: gpio@FF145000 {
+		gpiof: gpio@ff145000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF145000 0x1000>;
+			reg = <0xff145000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <2>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiof";
 		};
-		gpiog: gpio@FF146000 {
+		gpiog: gpio@ff146000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF146000 0x1000>;
+			reg = <0xff146000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <3>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiog";
 		};
-		gpioh: gpio@FF147000 {
+		gpioh: gpio@ff147000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF147000 0x1000>;
+			reg = <0xff147000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <2>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpioh";
 		};
-		gpioi: gpio@FF148000 {
+		gpioi: gpio@ff148000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF148000 0x1000>;
+			reg = <0xff148000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <12>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpioi";
 		};
-		gpioj: gpio@FF149000 {
+		gpioj: gpio@ff149000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF149000 0x1000>;
+			reg = <0xff149000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <32>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpioj";
 		};
-		gpiok: gpio@FF14a000 {
+		gpiok: gpio@ff14a000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF14A000 0x1000>;
+			reg = <0xff14a000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <22>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiok";
 		};
-		gpiol: gpio@FF14b000 {
+		gpiol: gpio@ff14b000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF14B000 0x1000>;
+			reg = <0xff14b000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <4>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiol";
 		};
-		gpiom: gpio@FF14c000 {
+		gpiom: gpio@ff14c000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF14C000 0x1000>;
+			reg = <0xff14c000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <4>;
 			gpio-ranges = <&iomux 0 0 0>;
 			gpio-ranges-group-names = "gpiom";
 		};
-		gpion: gpio@FF14d000 {
+		gpion: gpio@ff14d000 {
 			compatible = "abilis,tb10x-gpio";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <27 2>;
-			reg = <0xFF14D000 0x1000>;
+			reg = <0xff14d000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			abilis,ngpio = <5>;

arch/arc/boot/dts/abilis_tb101_dvk.dts

@@ -37,27 +37,27 @@ memory {
 	};
 
 	soc100 {
-		uart@FF100000 {
+		uart@ff100000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&pctl_uart0>;
 		};
-		ethernet@FE100000 {
+		ethernet@fe100000 {
 			phy-mode = "rgmii";
 		};
 
-		i2c0: i2c@FF120000 {
+		i2c0: i2c@ff120000 {
 			i2c-sda-hold-time-ns = <432>;
 		};
-		i2c1: i2c@FF121000 {
+		i2c1: i2c@ff121000 {
 			i2c-sda-hold-time-ns = <432>;
 		};
-		i2c2: i2c@FF122000 {
+		i2c2: i2c@ff122000 {
 			i2c-sda-hold-time-ns = <432>;
 		};
-		i2c3: i2c@FF123000 {
+		i2c3: i2c@ff123000 {
 			i2c-sda-hold-time-ns = <432>;
 		};
-		i2c4: i2c@FF124000 {
+		i2c4: i2c@ff124000 {
 			i2c-sda-hold-time-ns = <432>;
 		};
 

arch/arc/boot/dts/abilis_tb10x.dtsi

@@ -54,7 +54,7 @@ soc100 {
 		#size-cells	= <1>;
 		device_type	= "soc";
 		ranges		= <0xfe000000 0xfe000000 0x02000000
-				0x000F0000 0x000F0000 0x00010000>;
+				0x000f0000 0x000f0000 0x00010000>;
 		compatible	= "abilis,tb10x", "simple-bus";
 
 		pll0: oscillator {
@@ -75,10 +75,10 @@ ahb_clk: clkdiv_ahb {
 			clock-output-names = "ahb_clk";
 		};
 
-		iomux: iomux@FF10601c {
+		iomux: iomux@ff10601c {
 			compatible = "abilis,tb10x-iomux";
 			#gpio-range-cells = <3>;
-			reg = <0xFF10601c 0x4>;
+			reg = <0xff10601c 0x4>;
 		};
 
 		intc: interrupt-controller {
@@ -88,7 +88,7 @@ intc: interrupt-controller {
 		};
 		tb10x_ictl: pic@fe002000 {
 			compatible = "abilis,tb10x-ictl";
-			reg = <0xFE002000 0x20>;
+			reg = <0xfe002000 0x20>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
@@ -96,27 +96,27 @@ tb10x_ictl: pic@fe002000 {
 					20 21 22 23 24 25 26 27 28 29 30 31>;
 		};
 
-		uart@FF100000 {
+		uart@ff100000 {
 			compatible = "snps,dw-apb-uart";
-			reg = <0xFF100000 0x100>;
+			reg = <0xff100000 0x100>;
 			clock-frequency = <166666666>;
 			interrupts = <25 8>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			interrupt-parent = <&tb10x_ictl>;
 		};
-		ethernet@FE100000 {
+		ethernet@fe100000 {
 			compatible = "snps,dwmac-3.70a","snps,dwmac";
-			reg = <0xFE100000 0x1058>;
+			reg = <0xfe100000 0x1058>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <6 8>;
 			interrupt-names = "macirq";
 			clocks = <&ahb_clk>;
 			clock-names = "stmmaceth";
 		};
-		dma@FE000000 {
+		dma@fe000000 {
 			compatible = "snps,dma-spear1340";
-			reg = <0xFE000000 0x400>;
+			reg = <0xfe000000 0x400>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <14 8>;
 			dma-channels = <6>;
@@ -132,70 +132,70 @@ dma@FE000000 {
 			multi-block = <1 1 1 1 1 1>;
 		};
 
-		i2c0: i2c@FF120000 {
+		i2c0: i2c@ff120000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "snps,designware-i2c";
-			reg = <0xFF120000 0x1000>;
+			reg = <0xff120000 0x1000>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <12 8>;
 			clocks = <&ahb_clk>;
 		};
-		i2c1: i2c@FF121000 {
+		i2c1: i2c@ff121000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "snps,designware-i2c";
-			reg = <0xFF121000 0x1000>;
+			reg = <0xff121000 0x1000>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <12 8>;
 			clocks = <&ahb_clk>;
 		};
-		i2c2: i2c@FF122000 {
+		i2c2: i2c@ff122000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "snps,designware-i2c";
-			reg = <0xFF122000 0x1000>;
+			reg = <0xff122000 0x1000>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <12 8>;
 			clocks = <&ahb_clk>;
 		};
-		i2c3: i2c@FF123000 {
+		i2c3: i2c@ff123000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "snps,designware-i2c";
-			reg = <0xFF123000 0x1000>;
+			reg = <0xff123000 0x1000>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <12 8>;
 			clocks = <&ahb_clk>;
 		};
-		i2c4: i2c@FF124000 {
+		i2c4: i2c@ff124000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "snps,designware-i2c";
-			reg = <0xFF124000 0x1000>;
+			reg = <0xff124000 0x1000>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <12 8>;
 			clocks = <&ahb_clk>;
 		};
 
-		spi0: spi@0xFE010000 {
+		spi0: spi@fe010000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "abilis,tb100-spi";
 			num-cs = <1>;
-			reg = <0xFE010000 0x20>;
+			reg = <0xfe010000 0x20>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <26 8>;
 			clocks = <&ahb_clk>;
 		};
-		spi1: spi@0xFE011000 {
+		spi1: spi@fe011000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <1>;
 			compatible = "abilis,tb100-spi";
 			num-cs = <2>;
-			reg = <0xFE011000 0x20>;
+			reg = <0xfe011000 0x20>;
 			interrupt-parent = <&tb10x_ictl>;
 			interrupts = <10 8>;
 			clocks = <&ahb_clk>;
@@ -226,23 +226,23 @@ tb10x_stream_proc: tb10x-stream-proc {
 			interrupts = <20 2>, <19 2>;
 			interrupt-names = "cmd_irq", "event_irq";
 		};
-		tb10x_mdsc0: tb10x-mdscr@FF300000 {
+		tb10x_mdsc0: tb10x-mdscr@ff300000 {
 			compatible = "abilis,tb100-mdscr";
-			reg = <0xFF300000 0x7000>;
+			reg = <0xff300000 0x7000>;
 			tb100-mdscr-manage-tsin;
 		};
-		tb10x_mscr0: tb10x-mdscr@FF307000 {
+		tb10x_mscr0: tb10x-mdscr@ff307000 {
 			compatible = "abilis,tb100-mdscr";
-			reg = <0xFF307000 0x7000>;
+			reg = <0xff307000 0x7000>;
 		};
 		tb10x_scr0: tb10x-mdscr@ff30e000 {
 			compatible = "abilis,tb100-mdscr";
-			reg = <0xFF30e000 0x4000>;
+			reg = <0xff30e000 0x4000>;
 			tb100-mdscr-manage-tsin;
 		};
 		tb10x_scr1: tb10x-mdscr@ff312000 {
 			compatible = "abilis,tb100-mdscr";
-			reg = <0xFF312000 0x4000>;
+			reg = <0xff312000 0x4000>;
 			tb100-mdscr-manage-tsin;
 		};
 		tb10x_wfb: tb10x-wfb@ff319000 {

arch/arc/boot/dts/axc001.dtsi

@@ -41,7 +41,7 @@ core_intc: arc700-intc@cpu {
 		 * this GPIO block ORs all interrupts on CPU card (creg,..)
 		 * to uplink only 1 IRQ to ARC core intc
 		 */
-		dw-apb-gpio@0x2000 {
+		dw-apb-gpio@2000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = < 0x2000 0x80 >;
 			#address-cells = <1>;
@@ -60,7 +60,7 @@ ictl_intc: gpio-controller@0 {
 			};
 		};
 
-		debug_uart: dw-apb-uart@0x5000 {
+		debug_uart: dw-apb-uart@5000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x5000 0x100>;
 			clock-frequency = <33333000>;
@@ -88,7 +88,7 @@ arcpct0: pct {
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@0xe0012000 {
+	mb_intc: dw-apb-ictl@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;

arch/arc/boot/dts/axc003.dtsi

@@ -55,7 +55,7 @@ core_intc: archs-intc@cpu {
 		 * this GPIO block ORs all interrupts on CPU card (creg,..)
 		 * to uplink only 1 IRQ to ARC core intc
 		 */
-		dw-apb-gpio@0x2000 {
+		dw-apb-gpio@2000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = < 0x2000 0x80 >;
 			#address-cells = <1>;
@@ -74,7 +74,7 @@ ictl_intc: gpio-controller@0 {
 			};
 		};
 
-		debug_uart: dw-apb-uart@0x5000 {
+		debug_uart: dw-apb-uart@5000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x5000 0x100>;
 			clock-frequency = <33333000>;
@@ -102,19 +102,19 @@ arcpct0: pct {
 	 * external DMA buffer located outside of IOC aperture.
 	 */
 	axs10x_mb {
-		ethernet@0x18000 {
+		ethernet@18000 {
 			dma-coherent;
 		};
 
-		ehci@0x40000 {
+		ehci@40000 {
 			dma-coherent;
 		};
 
-		ohci@0x60000 {
+		ohci@60000 {
 			dma-coherent;
 		};
 
-		mmc@0x15000 {
+		mmc@15000 {
 			dma-coherent;
 		};
 	};
@@ -132,7 +132,7 @@ mmc@0x15000 {
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@0xe0012000 {
+	mb_intc: dw-apb-ictl@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
@@ -153,7 +153,7 @@ reserved-memory {
 		#size-cells = <2>;
 		ranges;
 		/*
-		 * Move frame buffer out of IOC aperture (0x8z-0xAz).
+		 * Move frame buffer out of IOC aperture (0x8z-0xaz).
 		 */
 		frame_buffer: frame_buffer@be000000 {
 			compatible = "shared-dma-pool";

arch/arc/boot/dts/axc003_idu.dtsi

@@ -62,7 +62,7 @@ idu_intc: idu-interrupt-controller {
 		 * this GPIO block ORs all interrupts on CPU card (creg,..)
 		 * to uplink only 1 IRQ to ARC core intc
 		 */
-		dw-apb-gpio@0x2000 {
+		dw-apb-gpio@2000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = < 0x2000 0x80 >;
 			#address-cells = <1>;
@@ -81,7 +81,7 @@ ictl_intc: gpio-controller@0 {
 			};
 		};
 
-		debug_uart: dw-apb-uart@0x5000 {
+		debug_uart: dw-apb-uart@5000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x5000 0x100>;
 			clock-frequency = <33333000>;
@@ -109,19 +109,19 @@ arcpct0: pct {
 	 * external DMA buffer located outside of IOC aperture.
 	 */
 	axs10x_mb {
-		ethernet@0x18000 {
+		ethernet@18000 {
 			dma-coherent;
 		};
 
-		ehci@0x40000 {
+		ehci@40000 {
 			dma-coherent;
 		};
 
-		ohci@0x60000 {
+		ohci@60000 {
 			dma-coherent;
 		};
 
-		mmc@0x15000 {
+		mmc@15000 {
 			dma-coherent;
 		};
 	};
@@ -138,7 +138,7 @@ mmc@0x15000 {
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@0xe0012000 {
+	mb_intc: dw-apb-ictl@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
@@ -159,7 +159,7 @@ reserved-memory {
 		#size-cells = <2>;
 		ranges;
 		/*
-		 * Move frame buffer out of IOC aperture (0x8z-0xAz).
+		 * Move frame buffer out of IOC aperture (0x8z-0xaz).
 		 */
 		frame_buffer: frame_buffer@be000000 {
 			compatible = "shared-dma-pool";

arch/arc/boot/dts/axs10x_mb.dtsi

@@ -72,7 +72,7 @@ pguclk: pguclk {
 			};
 		};
 
-		gmac: ethernet@0x18000 {
+		gmac: ethernet@18000 {
 			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = < 0x18000 0x2000 >;
@@ -88,13 +88,13 @@ gmac: ethernet@0x18000 {
 			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 		};
 
-		ehci@0x40000 {
+		ehci@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
 		};
 
-		ohci@0x60000 {
+		ohci@60000 {
 			compatible = "generic-ohci";
 			reg = < 0x60000 0x100 >;
 			interrupts = < 8 >;
@@ -118,7 +118,7 @@ ohci@0x60000 {
 		 * dw_mci_pltfm_prepare_command() is used in generic platform
 		 * code.
 		 */
-		mmc@0x15000 {
+		mmc@15000 {
 			compatible = "altr,socfpga-dw-mshc";
 			reg = < 0x15000 0x400 >;
 			fifo-depth = < 16 >;
@@ -129,7 +129,7 @@ mmc@0x15000 {
 			bus-width = < 4 >;
 		};
 
-		uart@0x20000 {
+		uart@20000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x20000 0x100>;
 			clock-frequency = <33333333>;
@@ -139,7 +139,7 @@ uart@0x20000 {
 			reg-io-width = <4>;
 		};
 
-		uart@0x21000 {
+		uart@21000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x21000 0x100>;
 			clock-frequency = <33333333>;
@@ -150,7 +150,7 @@ uart@0x21000 {
 		};
 
 		/* UART muxed with USB data port (ttyS3) */
-		uart@0x22000 {
+		uart@22000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x22000 0x100>;
 			clock-frequency = <33333333>;
@@ -160,7 +160,7 @@ uart@0x22000 {
 			reg-io-width = <4>;
 		};
 
-		i2c@0x1d000 {
+		i2c@1d000 {
 			compatible = "snps,designware-i2c";
 			reg = <0x1d000 0x100>;
 			clock-frequency = <400000>;
@@ -177,7 +177,7 @@ i2s: i2s@1e000 {
 			#sound-dai-cells = <0>;
 		};
 
-		i2c@0x1f000 {
+		i2c@1f000 {
 			compatible = "snps,designware-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -218,13 +218,13 @@ adv7511_output: endpoint {
 				};
 			};
 
-			eeprom@0x54{
+			eeprom@54{
 				compatible = "atmel,24c01";
 				reg = <0x54>;
 				pagesize = <0x8>;
 			};
 
-			eeprom@0x57{
+			eeprom@57{
 				compatible = "atmel,24c04";
 				reg = <0x57>;
 				pagesize = <0x8>;

arch/arc/boot/dts/hsdk.dts

@@ -110,12 +110,12 @@ soc {
 		cgu_rst: reset-controller@8a0 {
 			compatible = "snps,hsdk-reset";
 			#reset-cells = <1>;
-			reg = <0x8A0 0x4>, <0xFF0 0x4>;
+			reg = <0x8a0 0x4>, <0xff0 0x4>;
 		};
 
 		core_clk: core-clk@0 {
 			compatible = "snps,hsdk-core-pll-clock";
-			reg = <0x00 0x10>, <0x14B8 0x4>;
+			reg = <0x00 0x10>, <0x14b8 0x4>;
 			#clock-cells = <0>;
 			clocks = <&input_clk>;
 
@@ -167,6 +167,18 @@ mmcclk_biu: mmcclk-biu {
 			#clock-cells = <0>;
 		};
 
+		dmac_core_clk: dmac-core-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		dmac_cfg_clk: dmac-gpu-cfg-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			#clock-cells = <0>;
+		};
+
 		gmac: ethernet@8000 {
 			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
@@ -200,6 +212,7 @@ ohci@60000 {
 			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
 			reg = <0x60000 0x100>;
 			interrupts = <15>;
+			resets = <&cgu_rst HSDK_USB_RESET>;
 			dma-coherent;
 		};
 
@@ -207,6 +220,7 @@ ehci@40000 {
 			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
 			reg = <0x40000 0x100>;
 			interrupts = <15>;
+			resets = <&cgu_rst HSDK_USB_RESET>;
 			dma-coherent;
 		};
 
@@ -237,6 +251,21 @@ gpio_port_a: gpio-controller@0 {
 				reg = <0>;
 			};
 		};
+
+		dmac: dmac@80000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x80000 0x400>;
+			interrupts = <27>;
+			clocks = <&dmac_core_clk>, <&dmac_cfg_clk>;
+			clock-names = "core-clk", "cfgr-clk";
+
+			dma-channels = <4>;
+			snps,dma-masters = <2>;
+			snps,data-width = <3>;
+			snps,block-size = <4096 4096 4096 4096>;
+			snps,priority = <0 1 2 3>;
+			snps,axi-max-burst-len = <16>;
+		};
 	};
 
 	memory@80000000 {

arch/arc/boot/dts/vdk_axc003.dtsi

@@ -36,7 +36,7 @@ core_intc: archs-intc@cpu {
 			#interrupt-cells = <1>;
 		};
 
-		debug_uart: dw-apb-uart@0x5000 {
+		debug_uart: dw-apb-uart@5000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x5000 0x100>;
 			clock-frequency = <2403200>;
@@ -49,7 +49,7 @@ debug_uart: dw-apb-uart@0x5000 {
 
 	};
 
-	mb_intc: dw-apb-ictl@0xe0012000 {
+	mb_intc: dw-apb-ictl@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;

arch/arc/boot/dts/vdk_axc003_idu.dtsi

@@ -44,7 +44,7 @@ idu_intc: idu-interrupt-controller {
 			#interrupt-cells = <1>;
 		};
 
-		debug_uart: dw-apb-uart@0x5000 {
+		debug_uart: dw-apb-uart@5000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x5000 0x100>;
 			clock-frequency = <2403200>;
@@ -57,7 +57,7 @@ debug_uart: dw-apb-uart@0x5000 {
 
 	};
 
-	mb_intc: dw-apb-ictl@0xe0012000 {
+	mb_intc: dw-apb-ictl@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;

arch/arc/boot/dts/vdk_axs10x_mb.dtsi

@@ -36,7 +36,7 @@ pguclk: pguclk {
 			};
 		};
 
-		ethernet@0x18000 {
+		ethernet@18000 {
 			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = < 0x18000 0x2000 >;
@@ -49,13 +49,13 @@ ethernet@0x18000 {
 			clock-names = "stmmaceth";
 		};
 
-		ehci@0x40000 {
+		ehci@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
 		};
 
-		uart@0x20000 {
+		uart@20000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x20000 0x100>;
 			clock-frequency = <2403200>;
@@ -65,7 +65,7 @@ uart@0x20000 {
 			reg-io-width = <4>;
 		};
 
-		uart@0x21000 {
+		uart@21000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x21000 0x100>;
 			clock-frequency = <2403200>;
@@ -75,7 +75,7 @@ uart@0x21000 {
 			reg-io-width = <4>;
 		};
 
-		uart@0x22000 {
+		uart@22000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x22000 0x100>;
 			clock-frequency = <2403200>;
@@ -101,7 +101,7 @@ ps2: ps2@e0017400 {
 			interrupt-names = "arc_ps2_irq";
 		};
 
-		mmc@0x15000 {
+		mmc@15000 {
 			compatible = "snps,dw-mshc";
 			reg = <0x15000 0x400>;
 			fifo-depth = <1024>;
@@ -117,11 +117,11 @@ mmc@0x15000 {
 	 * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
 	 *
 	 * This node is intentionally put outside of MB above becase
-	 * it maps areas outside of MB's 0xEz-0xFz.
+	 * it maps areas outside of MB's 0xez-0xfz.
 	 */
-	uio_ev: uio@0xD0000000 {
+	uio_ev: uio@d0000000 {
 		compatible = "generic-uio";
-		reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
+		reg = <0xd0000000 0x2000 0xd1000000 0x2000 0x90000000 0x10000000 0xc0000000 0x10000000>;
 		reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
 		interrupt-parent = <&mb_intc>;
 		interrupts = <23>;

arch/arc/configs/hsdk_defconfig

@@ -8,6 +8,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set

arch/arc/include/asm/arcregs.h

@@ -82,6 +82,7 @@
 #define ECR_V_DTLB_MISS			0x05
 #define ECR_V_PROTV			0x06
 #define ECR_V_TRAP			0x09
+#define ECR_V_MISALIGN			0x0d
 #endif
 
 /* DTLB Miss and Protection Violation Cause Codes */
@@ -167,14 +168,6 @@ struct bcr_mpy {
 #endif
 };
 
-struct bcr_extn_xymem {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int ram_org:2, num_banks:4, bank_sz:4, ver:8;
-#else
-	unsigned int ver:8, bank_sz:4, num_banks:4, ram_org:2;
-#endif
-};
-
 struct bcr_iccm_arcompact {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int base:16, pad:5, sz:3, ver:8;
@@ -312,7 +305,7 @@ struct cpuinfo_arc {
 	struct cpuinfo_arc_bpu bpu;
 	struct bcr_identity core;
 	struct bcr_isa_arcv2 isa;
-	const char *details, *name;
+	const char *release, *name;
 	unsigned int vec_base;
 	struct cpuinfo_arc_ccm iccm, dccm;
 	struct {
@@ -322,7 +315,6 @@ struct cpuinfo_arc {
 			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
 	} extn;
 	struct bcr_mpy extn_mpy;
-	struct bcr_extn_xymem extn_xymem;
 };
 
 extern struct cpuinfo_arc cpuinfo_arc700[];

arch/arc/include/asm/irqflags-arcv2.h

@@ -44,7 +44,13 @@
 #define ARCV2_IRQ_DEF_PRIO	1
 
 /* seed value for status register */
-#define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | STATUS_AD_MASK | \
+#ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
+#define __AD_ENB	STATUS_AD_MASK
+#else
+#define __AD_ENB	0
+#endif
+
+#define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | __AD_ENB | \
 					(ARCV2_IRQ_DEF_PRIO << 1))
 
 #ifndef __ASSEMBLY__

arch/arc/include/asm/perf_event.h

@@ -105,10 +105,10 @@ static const char * const arc_pmu_ev_hw_map[] = {
 	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
 	/* All jump instructions that are taken */
 	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
-	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
 #ifdef CONFIG_ISA_ARCV2
 	[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
 #else
+	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
 	[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */
 #endif
 	[PERF_COUNT_ARC_LDC] = "imemrdc",	/* Instr: mem read cached */

arch/arc/include/asm/spinlock.h

@@ -21,8 +21,6 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 {
 	unsigned int val;
 
-	smp_mb();
-
 	__asm__ __volatile__(
 	"1:	llock	%[val], [%[slock]]	\n"
 	"	breq	%[val], %[LOCKED], 1b	\n"	/* spin while LOCKED */
@@ -34,6 +32,14 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 	  [LOCKED]	"r"	(__ARCH_SPIN_LOCK_LOCKED__)
 	: "memory", "cc");
 
+	/*
+	 * ACQUIRE barrier to ensure load/store after taking the lock
+	 * don't "bleed-up" out of the critical section (leak-in is allowed)
+	 * http://www.spinics.net/lists/kernel/msg2010409.html
+	 *
+	 * ARCv2 only has load-load, store-store and all-all barrier
+	 * thus need the full all-all barrier
+	 */
 	smp_mb();
 }
 
@@ -42,8 +48,6 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 {
 	unsigned int val, got_it = 0;
 
-	smp_mb();
-
 	__asm__ __volatile__(
 	"1:	llock	%[val], [%[slock]]	\n"
 	"	breq	%[val], %[LOCKED], 4f	\n"	/* already LOCKED, just bail */
@@ -67,9 +71,7 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
 	smp_mb();
 
-	lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
-
-	smp_mb();
+	WRITE_ONCE(lock->slock, __ARCH_SPIN_LOCK_UNLOCKED__);
 }
 
 /*
@@ -81,8 +83,6 @@ static inline void arch_read_lock(arch_rwlock_t *rw)
 {
 	unsigned int val;
 
-	smp_mb();
-
 	/*
 	 * zero means writer holds the lock exclusively, deny Reader.
 	 * Otherwise grant lock to first/subseq reader
@@ -113,8 +113,6 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
 {
 	unsigned int val, got_it = 0;
 
-	smp_mb();
-
 	__asm__ __volatile__(
 	"1:	llock	%[val], [%[rwlock]]	\n"
 	"	brls	%[val], %[WR_LOCKED], 4f\n"	/* <= 0: already write locked, bail */
@@ -140,8 +138,6 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
 {
 	unsigned int val;
 
-	smp_mb();
-
 	/*
 	 * If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__),
 	 * deny writer. Otherwise if unlocked grant to writer
@@ -175,8 +171,6 @@ static inline int arch_write_trylock(arch_rwlock_t *rw)
 {
 	unsigned int val, got_it = 0;
 
-	smp_mb();
-
 	__asm__ __volatile__(
 	"1:	llock	%[val], [%[rwlock]]	\n"
 	"	brne	%[val], %[UNLOCKED], 4f	\n"	/* !UNLOCKED, bail */
@@ -217,17 +211,13 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 	: [val]		"=&r"	(val)
 	: [rwlock]	"r"	(&(rw->counter))
 	: "memory", "cc");
-
-	smp_mb();
 }
 
 static inline void arch_write_unlock(arch_rwlock_t *rw)
 {
 	smp_mb();
 
-	rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
-
-	smp_mb();
+	WRITE_ONCE(rw->counter, __ARCH_RW_LOCK_UNLOCKED__);
 }
 
 #else	/* !CONFIG_ARC_HAS_LLSC */
@@ -237,10 +227,9 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 	unsigned int val = __ARCH_SPIN_LOCK_LOCKED__;
 
 	/*
-	 * This smp_mb() is technically superfluous, we only need the one
-	 * after the lock for providing the ACQUIRE semantics.
-	 * However doing the "right" thing was regressing hackbench
-	 * so keeping this, pending further investigation
+	 * Per lkmm, smp_mb() is only required after _lock (and before_unlock)
+	 * for ACQ and REL semantics respectively. However EX based spinlocks
+	 * need the extra smp_mb to workaround a hardware quirk.
 	 */
 	smp_mb();
 
@@ -257,14 +246,6 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 #endif
 	: "memory");
 
-	/*
-	 * ACQUIRE barrier to ensure load/store after taking the lock
-	 * don't "bleed-up" out of the critical section (leak-in is allowed)
-	 * http://www.spinics.net/lists/kernel/msg2010409.html
-	 *
-	 * ARCv2 only has load-load, store-store and all-all barrier
-	 * thus need the full all-all barrier
-	 */
 	smp_mb();
 }
 
@@ -309,8 +290,7 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 	: "memory");
 
 	/*
-	 * superfluous, but keeping for now - see pairing version in
-	 * arch_spin_lock above
+	 * see pairing version/comment in arch_spin_lock above
 	 */
 	smp_mb();
 }
@@ -344,7 +324,6 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
 	arch_spin_unlock(&(rw->lock_mutex));
 	local_irq_restore(flags);
 
-	smp_mb();
 	return ret;
 }
 

arch/arc/kernel/head.S

@@ -54,7 +54,12 @@
 	; gcc 7.3.1 (ARC GNU 2018.03) onwards generates unaligned access
 	; by default
 	lr	r5, [status32]
+#ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
 	bset	r5, r5, STATUS_AD_BIT
+#else
+	; Although disabled at reset, bootloader might have enabled it
+	bclr	r5, r5, STATUS_AD_BIT
+#endif
 	kflag	r5
 #endif
 .endm
@@ -106,6 +111,7 @@ ENTRY(stext)
 	;    r2 = pointer to uboot provided cmdline or external DTB in mem
 	; These are handled later in handle_uboot_args()
 	st	r0, [@uboot_tag]
+	st      r1, [@uboot_magic]
 	st	r2, [@uboot_arg]
 
 	; setup "current" tsk and optionally cache it in dedicated r25

arch/arc/kernel/intc-arcv2.c

@@ -95,7 +95,7 @@ void arc_init_IRQ(void)
 
 	/* setup status32, don't enable intr yet as kernel doesn't want */
 	tmp = read_aux_reg(ARC_REG_STATUS32);
-	tmp |= STATUS_AD_MASK | (ARCV2_IRQ_DEF_PRIO << 1);
+	tmp |= ARCV2_IRQ_DEF_PRIO << 1;
 	tmp &= ~STATUS_IE_MASK;
 	asm volatile("kflag %0	\n"::"r"(tmp));
 }

arch/arc/kernel/setup.c

@@ -36,6 +36,7 @@ unsigned int intr_to_DE_cnt;
 
 /* Part of U-boot ABI: see head.S */
 int __initdata uboot_tag;
+int __initdata uboot_magic;
 char __initdata *uboot_arg;
 
 const struct machine_desc *machine_desc;
@@ -44,7 +45,8 @@ struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
 
 struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
 
-static const struct id_to_str arc_cpu_rel[] = {
+static const struct id_to_str arc_legacy_rel[] = {
+	/* ID.ARCVER,	Release */
 #ifdef CONFIG_ISA_ARCOMPACT
 	{ 0x34, 	"R4.10"},
 	{ 0x35, 	"R4.11"},
@@ -52,21 +54,15 @@ static const struct id_to_str arc_cpu_rel[] = {
 	{ 0x51, 	"R2.0" },
 	{ 0x52, 	"R2.1" },
 	{ 0x53,		"R3.0" },
-	{ 0x54, "R3.10a" },
 #endif
 	{ 0x00,		NULL   }
 };
 
-static const struct id_to_str arc_cpu_nm[] = {
-#ifdef CONFIG_ISA_ARCOMPACT
-	{ 0x20, "ARC 600"   },
-	{ 0x30, "ARC 770"   },  /* 750 identified seperately */
-#else
-	{ 0x40, "ARC EM"  },
-	{ 0x50, "ARC HS38"  },
-	{ 0x54, "ARC HS48"  },
-#endif
-	{ 0x00, "Unknown"   }
+static const struct id_to_str arc_cpu_rel[] = {
+	/* UARCH.MAJOR,	Release */
+	{  0,		"R3.10a"},
+	{  1,		"R3.50a"},
+	{  0xFF,	NULL   }
 };
 
 static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
@@ -116,31 +112,72 @@ static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
 	}
 }
 
-static void read_arc_build_cfg_regs(void)
+static void decode_arc_core(struct cpuinfo_arc *cpu)
 {
-	struct bcr_timer timer;
-	struct bcr_generic bcr;
-	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
+	struct bcr_uarch_build_arcv2 uarch;
 	const struct id_to_str *tbl;
-	struct bcr_isa_arcv2 isa;
-	struct bcr_actionpoint ap;
 
-	FIX_PTR(cpu);
+	/*
+	 * Up until (including) the first core4 release (0x54) things were
+	 * simple: AUX IDENTITY.ARCVER was sufficient to identify arc family
+	 * and release: 0x50 to 0x53 was HS38, 0x54 was HS48 (dual issue)
+	 */
 
-	READ_BCR(AUX_IDENTITY, cpu->core);
+	if (cpu->core.family < 0x54) { /* includes arc700 */
 
-	for (tbl = &arc_cpu_rel[0]; tbl->id != 0; tbl++) {
+		for (tbl = &arc_legacy_rel[0]; tbl->id != 0; tbl++) {
 			if (cpu->core.family == tbl->id) {
-			cpu->details = tbl->str;
+				cpu->release = tbl->str;
 				break;
 			}
 		}
 
-	for (tbl = &arc_cpu_nm[0]; tbl->id != 0; tbl++) {
-		if ((cpu->core.family & 0xF4) == tbl->id)
+		if (is_isa_arcompact())
+			cpu->name = "ARC700";
+		else if (tbl->str)
+			cpu->name = "HS38";
+		else
+			cpu->name = cpu->release = "Unknown";
+
+		return;
+	}
+
+	/*
+	 * However the subsequent HS release (same 0x54) allow HS38 or HS48
+	 * configurations and encode this info in a different BCR.
+	 * The BCR was introduced in 0x54 so can't be read unconditionally.
+	 */
+
+	READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
+
+	if (uarch.prod == 4) {
+		cpu->name = "HS48";
+		cpu->extn.dual = 1;
+
+	} else {
+		cpu->name = "HS38";
+	}
+
+	for (tbl = &arc_cpu_rel[0]; tbl->id != 0xFF; tbl++) {
+		if (uarch.maj == tbl->id) {
+			cpu->release = tbl->str;
 			break;
 		}
-	cpu->name = tbl->str;
+	}
+}
+
+static void read_arc_build_cfg_regs(void)
+{
+	struct bcr_timer timer;
+	struct bcr_generic bcr;
+	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
+	struct bcr_isa_arcv2 isa;
+	struct bcr_actionpoint ap;
+
+	FIX_PTR(cpu);
+
+	READ_BCR(AUX_IDENTITY, cpu->core);
+	decode_arc_core(cpu);
 
 	READ_BCR(ARC_REG_TIMERS_BCR, timer);
 	cpu->extn.timer0 = timer.t0;
@@ -151,16 +188,6 @@ static void read_arc_build_cfg_regs(void)
 
 	READ_BCR(ARC_REG_MUL_BCR, cpu->extn_mpy);
 
-	cpu->extn.norm = read_aux_reg(ARC_REG_NORM_BCR) > 1 ? 1 : 0; /* 2,3 */
-	cpu->extn.barrel = read_aux_reg(ARC_REG_BARREL_BCR) > 1 ? 1 : 0; /* 2,3 */
-	cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR) ? 1 : 0;        /* 1,3 */
-	cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR) ? 1 : 0;
-	cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR) > 1 ? 1 : 0; /* 2 */
-	cpu->extn.swape = (cpu->core.family >= 0x34) ? 1 :
-				IS_ENABLED(CONFIG_ARC_HAS_SWAPE);
-
-	READ_BCR(ARC_REG_XY_MEM_BCR, cpu->extn_xymem);
-
 	/* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
 	read_decode_ccm_bcr(cpu);
 
@@ -198,30 +225,12 @@ static void read_arc_build_cfg_regs(void)
 		cpu->bpu.num_pred = 2048 << bpu.pte;
 		cpu->bpu.ret_stk = 4 << bpu.rse;
 
-		if (cpu->core.family >= 0x54) {
-
-			struct bcr_uarch_build_arcv2 uarch;
-
-			/*
-			 * The first 0x54 core (uarch maj:min 0:1 or 0:2) was
-			 * dual issue only (HS4x). But next uarch rev (1:0)
-			 * allows it be configured for single issue (HS3x)
-			 * Ensure we fiddle with dual issue only on HS4x
-			 */
-			READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
-
-			if (uarch.prod == 4) {
+		/* if dual issue hardware, is it enabled ? */
+		if (cpu->extn.dual) {
 			unsigned int exec_ctrl;
 
-				/* dual issue hardware always present */
-				cpu->extn.dual = 1;
-
 			READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
-
-				/* dual issue hardware enabled ? */
 			cpu->extn.dual_enb = !(exec_ctrl & 1);
-
-			}
 		}
 	}
 
@@ -263,7 +272,8 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 {
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
 	struct bcr_identity *core = &cpu->core;
-	int i, n = 0, ua = 0;
+	char mpy_opt[16];
+	int n = 0;
 
 	FIX_PTR(cpu);
 
@@ -272,7 +282,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 		       core->family, core->cpu_id, core->chip_id);
 
 	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n",
-		       cpu_id, cpu->name, cpu->details,
+		       cpu_id, cpu->name, cpu->release,
 		       is_isa_arcompact() ? "ARCompact" : "ARCv2",
 		       IS_AVAIL1(cpu->isa.be, "[Big-Endian]"),
 		       IS_AVAIL3(cpu->extn.dual, cpu->extn.dual_enb, " Dual-Issue "));
@@ -283,40 +293,28 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 		       IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
 		       IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT));
 
-#ifdef __ARC_UNALIGNED__
-	ua = 1;
-#endif
-	n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s%s",
-			   IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
-			   IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
-			   IS_AVAIL1(cpu->isa.unalign, "unalign "), IS_USED_RUN(ua));
-
-	if (i)
-		n += scnprintf(buf + n, len - n, "\n\t\t: ");
-
 	if (cpu->extn_mpy.ver) {
-		if (cpu->extn_mpy.ver <= 0x2) {	/* ARCompact */
-			n += scnprintf(buf + n, len - n, "mpy ");
+		if (is_isa_arcompact()) {
+			scnprintf(mpy_opt, 16, "mpy");
 		} else {
+
 			int opt = 2;	/* stock MPY/MPYH */
 
 			if (cpu->extn_mpy.dsp)	/* OPT 7-9 */
 				opt = cpu->extn_mpy.dsp + 6;
 
-			n += scnprintf(buf + n, len - n, "mpy[opt %d] ", opt);
+			scnprintf(mpy_opt, 16, "mpy[opt %d] ", opt);
 		}
 	}
 
 	n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
-		       IS_AVAIL1(cpu->isa.div_rem, "div_rem "),
-		       IS_AVAIL1(cpu->extn.norm, "norm "),
-		       IS_AVAIL1(cpu->extn.barrel, "barrel-shift "),
-		       IS_AVAIL1(cpu->extn.swap, "swap "),
-		       IS_AVAIL1(cpu->extn.minmax, "minmax "),
-		       IS_AVAIL1(cpu->extn.crc, "crc "),
-		       IS_AVAIL2(cpu->extn.swape, "swape", CONFIG_ARC_HAS_SWAPE));
-
-	if (cpu->bpu.ver)
+		       IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
+		       IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
+		       IS_AVAIL2(cpu->isa.unalign, "unalign ", CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS),
+		       IS_AVAIL1(cpu->extn_mpy.ver, mpy_opt),
+		       IS_AVAIL1(cpu->isa.div_rem, "div_rem "));
+
+	if (cpu->bpu.ver) {
 		n += scnprintf(buf + n, len - n,
 			      "BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d",
 			      IS_AVAIL1(cpu->bpu.full, "full"),
@@ -336,8 +334,9 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 					       IS_DISABLED_RUN(!ctl));
 			}
 		}
-
 		n += scnprintf(buf + n, len - n, "\n");
+	}
+
 	return buf;
 }
 
@@ -390,11 +389,6 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 		}
 	}
 
-	n += scnprintf(buf + n, len - n, "OS ABI [v%d]\t: %s\n",
-			EF_ARC_OSABI_CURRENT >> 8,
-			EF_ARC_OSABI_CURRENT == EF_ARC_OSABI_V3 ?
-			"no-legacy-syscalls" : "64-bit data any register aligned");
-
 	return buf;
 }
 
@@ -497,6 +491,8 @@ static inline bool uboot_arg_invalid(unsigned long addr)
 #define UBOOT_TAG_NONE		0
 #define UBOOT_TAG_CMDLINE	1
 #define UBOOT_TAG_DTB		2
+/* We always pass 0 as magic from U-boot */
+#define UBOOT_MAGIC_VALUE	0
 
 void __init handle_uboot_args(void)
 {
@@ -511,6 +507,11 @@ void __init handle_uboot_args(void)
 		goto ignore_uboot_args;
 	}
 
+	if (uboot_magic != UBOOT_MAGIC_VALUE) {
+		pr_warn(IGNORE_ARGS "non zero uboot magic\n");
+		goto ignore_uboot_args;
+	}
+
 	if (uboot_tag != UBOOT_TAG_NONE &&
             uboot_arg_invalid((unsigned long)uboot_arg)) {
 		pr_warn(IGNORE_ARGS "invalid uboot arg: '%px'\n", uboot_arg);

arch/arc/kernel/troubleshoot.c

@@ -145,7 +145,8 @@ static void show_ecr_verbose(struct pt_regs *regs)
 	} else if (vec == ECR_V_PROTV) {
 		if (cause_code == ECR_C_PROTV_INST_FETCH)
 			pr_cont("Execute from Non-exec Page\n");
-		else if (cause_code == ECR_C_PROTV_MISALIG_DATA)
+		else if (cause_code == ECR_C_PROTV_MISALIG_DATA &&
+		         IS_ENABLED(CONFIG_ISA_ARCOMPACT))
 			pr_cont("Misaligned r/w from 0x%08lx\n", address);
 		else
 			pr_cont("%s access not allowed on page\n",
@@ -161,6 +162,8 @@ static void show_ecr_verbose(struct pt_regs *regs)
 			pr_cont("Bus Error from Data Mem\n");
 		else
 			pr_cont("Bus Error, check PRM\n");
+	} else if (vec == ECR_V_MISALIGN) {
+		pr_cont("Misaligned r/w from 0x%08lx\n", address);
 #endif
 	} else if (vec == ECR_V_TRAP) {
 		if (regs->ecr_param == 5)

arch/arc/lib/Makefile

@@ -8,4 +8,10 @@
 lib-y	:= strchr-700.o strcpy-700.o strlen.o memcmp.o
 
 lib-$(CONFIG_ISA_ARCOMPACT)	+= memcpy-700.o memset.o strcmp.o
-lib-$(CONFIG_ISA_ARCV2)		+= memcpy-archs.o memset-archs.o strcmp-archs.o
+lib-$(CONFIG_ISA_ARCV2)		+= memset-archs.o strcmp-archs.o
+
+ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
+lib-$(CONFIG_ISA_ARCV2)		+=memcpy-archs-unaligned.o
+else
+lib-$(CONFIG_ISA_ARCV2)		+=memcpy-archs.o
+endif

arch/arc/lib/memcpy-archs-unaligned.S

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * ARCv2 memcpy implementation optimized for unaligned memory access using.
+ *
+ * Copyright (C) 2019 Synopsys
+ * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+ */
+
+#include <linux/linkage.h>
+
+#ifdef CONFIG_ARC_HAS_LL64
+# define LOADX(DST,RX)		ldd.ab	DST, [RX, 8]
+# define STOREX(SRC,RX)		std.ab	SRC, [RX, 8]
+# define ZOLSHFT		5
+# define ZOLAND			0x1F
+#else
+# define LOADX(DST,RX)		ld.ab	DST, [RX, 4]
+# define STOREX(SRC,RX)		st.ab	SRC, [RX, 4]
+# define ZOLSHFT		4
+# define ZOLAND			0xF
+#endif
+
+ENTRY_CFI(memcpy)
+	mov	r3, r0		; don;t clobber ret val
+
+	lsr.f	lp_count, r2, ZOLSHFT
+	lpnz	@.Lcopy32_64bytes
+	;; LOOP START
+	LOADX	(r6, r1)
+	LOADX	(r8, r1)
+	LOADX	(r10, r1)
+	LOADX	(r4, r1)
+	STOREX	(r6, r3)
+	STOREX	(r8, r3)
+	STOREX	(r10, r3)
+	STOREX	(r4, r3)
+.Lcopy32_64bytes:
+
+	and.f	lp_count, r2, ZOLAND ;Last remaining 31 bytes
+	lpnz	@.Lcopyremainingbytes
+	;; LOOP START
+	ldb.ab	r5, [r1, 1]
+	stb.ab	r5, [r3, 1]
+.Lcopyremainingbytes:
+
+	j	[blink]
+END_CFI(memcpy)