Commit 5508124c authored by Akinobu Mita's avatar Akinobu Mita Committed by Stephen Boyd

clk: cdce925: add support for CDCE913, CDCE937, and CDCE949

The CDCE925 is a member of the CDCE(L)9xx programmable clock generator
family.  There are also CDCE913, CDCE937, CDCE949 which have different
number of PLLs and outputs.

The clk-cdce925 driver supports only CDCE925 in the family.  This adds
support for the CDCE913, CDCE937, CDCE949, too.
Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Cc: Mike Looijmans <mike.looijmans@topic.nl>
Cc: Michael Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent 8e18d065
Binding for TO CDCE925 programmable I2C clock synthesizers. Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers.
Reference Reference
This binding uses the common clock binding[1]. This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] http://www.ti.com/product/cdce925 [2] http://www.ti.com/product/cdce913
[3] http://www.ti.com/product/cdce925
[4] http://www.ti.com/product/cdce937
[5] http://www.ti.com/product/cdce949
The driver provides clock sources for each output Y1 through Y5. The driver provides clock sources for each output Y1 through Y5.
Required properties: Required properties:
- compatible: Shall be "ti,cdce925" - compatible: Shall be one of the following:
- "ti,cdce913": 1-PLL, 3 Outputs
- "ti,cdce925": 2-PLL, 5 Outputs
- "ti,cdce937": 3-PLL, 7 Outputs
- "ti,cdce949": 4-PLL, 9 Outputs
- reg: I2C device address. - reg: I2C device address.
- clocks: Points to a fixed parent clock that provides the input frequency. - clocks: Points to a fixed parent clock that provides the input frequency.
- #clock-cells: From common clock bindings: Shall be 1. - #clock-cells: From common clock bindings: Shall be 1.
...@@ -18,7 +25,7 @@ Optional properties: ...@@ -18,7 +25,7 @@ Optional properties:
- xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a
board, or to compensate for external influences. board, or to compensate for external influences.
For both PLL1 and PLL2 an optional child node can be used to specify spread For all PLL1, PLL2, ... an optional child node can be used to specify spread
spectrum clocking parameters for a board. spectrum clocking parameters for a board.
- spread-spectrum: SSC mode as defined in the data sheet. - spread-spectrum: SSC mode as defined in the data sheet.
- spread-spectrum-center: Use "centered" mode instead of "max" mode. When - spread-spectrum-center: Use "centered" mode instead of "max" mode. When
......
...@@ -95,16 +95,17 @@ config COMMON_CLK_CDCE706 ...@@ -95,16 +95,17 @@ config COMMON_CLK_CDCE706
This driver supports TI CDCE706 programmable 3-PLL clock synthesizer. This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
config COMMON_CLK_CDCE925 config COMMON_CLK_CDCE925
tristate "Clock driver for TI CDCE925 devices" tristate "Clock driver for TI CDCE913/925/937/949 devices"
depends on I2C depends on I2C
depends on OF depends on OF
select REGMAP_I2C select REGMAP_I2C
help help
---help--- ---help---
This driver supports the TI CDCE925 programmable clock synthesizer. This driver supports the TI CDCE913/925/937/949 programmable clock
The chip contains two PLLs with spread-spectrum clocking support and synthesizer. Each chip has different number of PLLs and outputs.
five output dividers. The driver only supports the following setup, For example, the CDCE925 contains two PLLs with spread-spectrum
and uses a fixed setting for the output muxes. clocking support and five output dividers. The driver only supports
the following setup, and uses a fixed setting for the output muxes.
Y1 is derived from the input clock Y1 is derived from the input clock
Y2 and Y3 derive from PLL1 Y2 and Y3 derive from PLL1
Y4 and Y5 derive from PLL2 Y4 and Y5 derive from PLL2
......
/* /*
* Driver for TI Dual PLL CDCE925 clock synthesizer * Driver for TI Multi PLL CDCE913/925/937/949 clock synthesizer
* *
* This driver always connects the Y1 to the input clock, Y2/Y3 to PLL1 * This driver always connects the Y1 to the input clock, Y2/Y3 to PLL1,
* and Y4/Y5 to PLL2. PLL frequency is set on a first-come-first-serve * Y4/Y5 to PLL2, and so on. PLL frequency is set on a first-come-first-serve
* basis. Clients can directly request any frequency that the chip can * basis. Clients can directly request any frequency that the chip can
* deliver using the standard clk framework. In addition, the device can * deliver using the standard clk framework. In addition, the device can
* be configured and activated via the devicetree. * be configured and activated via the devicetree.
...@@ -19,11 +19,32 @@ ...@@ -19,11 +19,32 @@
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/gcd.h> #include <linux/gcd.h>
/* The chip has 2 PLLs which can be routed through dividers to 5 outputs. /* Each chip has different number of PLLs and outputs, for example:
* The CECE925 has 2 PLLs which can be routed through dividers to 5 outputs.
* Model this as 2 PLL clocks which are parents to the outputs. * Model this as 2 PLL clocks which are parents to the outputs.
*/ */
#define NUMBER_OF_PLLS 2
#define NUMBER_OF_OUTPUTS 5 enum {
CDCE913,
CDCE925,
CDCE937,
CDCE949,
};
struct clk_cdce925_chip_info {
int num_plls;
int num_outputs;
};
static const struct clk_cdce925_chip_info clk_cdce925_chip_info_tbl[] = {
[CDCE913] = { .num_plls = 1, .num_outputs = 3 },
[CDCE925] = { .num_plls = 2, .num_outputs = 5 },
[CDCE937] = { .num_plls = 3, .num_outputs = 7 },
[CDCE949] = { .num_plls = 4, .num_outputs = 9 },
};
#define MAX_NUMBER_OF_PLLS 4
#define MAX_NUMBER_OF_OUTPUTS 9
#define CDCE925_REG_GLOBAL1 0x01 #define CDCE925_REG_GLOBAL1 0x01
#define CDCE925_REG_Y1SPIPDIVH 0x02 #define CDCE925_REG_Y1SPIPDIVH 0x02
...@@ -43,7 +64,7 @@ struct clk_cdce925_output { ...@@ -43,7 +64,7 @@ struct clk_cdce925_output {
struct clk_hw hw; struct clk_hw hw;
struct clk_cdce925_chip *chip; struct clk_cdce925_chip *chip;
u8 index; u8 index;
u16 pdiv; /* 1..127 for Y2-Y5; 1..1023 for Y1 */ u16 pdiv; /* 1..127 for Y2-Y9; 1..1023 for Y1 */
}; };
#define to_clk_cdce925_output(_hw) \ #define to_clk_cdce925_output(_hw) \
container_of(_hw, struct clk_cdce925_output, hw) container_of(_hw, struct clk_cdce925_output, hw)
...@@ -60,8 +81,9 @@ struct clk_cdce925_pll { ...@@ -60,8 +81,9 @@ struct clk_cdce925_pll {
struct clk_cdce925_chip { struct clk_cdce925_chip {
struct regmap *regmap; struct regmap *regmap;
struct i2c_client *i2c_client; struct i2c_client *i2c_client;
struct clk_cdce925_pll pll[NUMBER_OF_PLLS]; const struct clk_cdce925_chip_info *chip_info;
struct clk_cdce925_output clk[NUMBER_OF_OUTPUTS]; struct clk_cdce925_pll pll[MAX_NUMBER_OF_PLLS];
struct clk_cdce925_output clk[MAX_NUMBER_OF_OUTPUTS];
}; };
/* ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** */ /* ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** */
...@@ -284,6 +306,18 @@ static void cdce925_clk_set_pdiv(struct clk_cdce925_output *data, u16 pdiv) ...@@ -284,6 +306,18 @@ static void cdce925_clk_set_pdiv(struct clk_cdce925_output *data, u16 pdiv)
case 4: case 4:
regmap_update_bits(data->chip->regmap, 0x27, 0x7F, pdiv); regmap_update_bits(data->chip->regmap, 0x27, 0x7F, pdiv);
break; break;
case 5:
regmap_update_bits(data->chip->regmap, 0x36, 0x7F, pdiv);
break;
case 6:
regmap_update_bits(data->chip->regmap, 0x37, 0x7F, pdiv);
break;
case 7:
regmap_update_bits(data->chip->regmap, 0x46, 0x7F, pdiv);
break;
case 8:
regmap_update_bits(data->chip->regmap, 0x47, 0x7F, pdiv);
break;
} }
} }
...@@ -302,6 +336,14 @@ static void cdce925_clk_activate(struct clk_cdce925_output *data) ...@@ -302,6 +336,14 @@ static void cdce925_clk_activate(struct clk_cdce925_output *data)
case 4: case 4:
regmap_update_bits(data->chip->regmap, 0x24, 0x03, 0x03); regmap_update_bits(data->chip->regmap, 0x24, 0x03, 0x03);
break; break;
case 5:
case 6:
regmap_update_bits(data->chip->regmap, 0x34, 0x03, 0x03);
break;
case 7:
case 8:
regmap_update_bits(data->chip->regmap, 0x44, 0x03, 0x03);
break;
} }
} }
...@@ -474,15 +516,6 @@ static const struct clk_ops cdce925_clk_y1_ops = { ...@@ -474,15 +516,6 @@ static const struct clk_ops cdce925_clk_y1_ops = {
.set_rate = cdce925_clk_y1_set_rate, .set_rate = cdce925_clk_y1_set_rate,
}; };
static struct regmap_config cdce925_regmap_config = {
.name = "configuration0",
.reg_bits = 8,
.val_bits = 8,
.cache_type = REGCACHE_RBTREE,
.max_register = 0x2F,
};
#define CDCE925_I2C_COMMAND_BLOCK_TRANSFER 0x00 #define CDCE925_I2C_COMMAND_BLOCK_TRANSFER 0x00
#define CDCE925_I2C_COMMAND_BYTE_TRANSFER 0x80 #define CDCE925_I2C_COMMAND_BYTE_TRANSFER 0x80
...@@ -582,13 +615,19 @@ static int cdce925_probe(struct i2c_client *client, ...@@ -582,13 +615,19 @@ static int cdce925_probe(struct i2c_client *client,
struct clk_cdce925_chip *data; struct clk_cdce925_chip *data;
struct device_node *node = client->dev.of_node; struct device_node *node = client->dev.of_node;
const char *parent_name; const char *parent_name;
const char *pll_clk_name[NUMBER_OF_PLLS] = {NULL,}; const char *pll_clk_name[MAX_NUMBER_OF_PLLS] = {NULL,};
struct clk_init_data init; struct clk_init_data init;
u32 value; u32 value;
int i; int i;
int err; int err;
struct device_node *np_output; struct device_node *np_output;
char child_name[6]; char child_name[6];
struct regmap_config config = {
.name = "configuration0",
.reg_bits = 8,
.val_bits = 8,
.cache_type = REGCACHE_RBTREE,
};
dev_dbg(&client->dev, "%s\n", __func__); dev_dbg(&client->dev, "%s\n", __func__);
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
...@@ -596,8 +635,11 @@ static int cdce925_probe(struct i2c_client *client, ...@@ -596,8 +635,11 @@ static int cdce925_probe(struct i2c_client *client,
return -ENOMEM; return -ENOMEM;
data->i2c_client = client; data->i2c_client = client;
data->chip_info = &clk_cdce925_chip_info_tbl[id->driver_data];
config.max_register = CDCE925_OFFSET_PLL +
data->chip_info->num_plls * 0x10 - 1;
data->regmap = devm_regmap_init(&client->dev, &regmap_cdce925_bus, data->regmap = devm_regmap_init(&client->dev, &regmap_cdce925_bus,
&client->dev, &cdce925_regmap_config); &client->dev, &config);
if (IS_ERR(data->regmap)) { if (IS_ERR(data->regmap)) {
dev_err(&client->dev, "failed to allocate register map\n"); dev_err(&client->dev, "failed to allocate register map\n");
return PTR_ERR(data->regmap); return PTR_ERR(data->regmap);
...@@ -626,7 +668,7 @@ static int cdce925_probe(struct i2c_client *client, ...@@ -626,7 +668,7 @@ static int cdce925_probe(struct i2c_client *client,
init.num_parents = parent_name ? 1 : 0; init.num_parents = parent_name ? 1 : 0;
/* Register PLL clocks */ /* Register PLL clocks */
for (i = 0; i < NUMBER_OF_PLLS; ++i) { for (i = 0; i < data->chip_info->num_plls; ++i) {
pll_clk_name[i] = kasprintf(GFP_KERNEL, "%s.pll%d", pll_clk_name[i] = kasprintf(GFP_KERNEL, "%s.pll%d",
client->dev.of_node->name, i); client->dev.of_node->name, i);
init.name = pll_clk_name[i]; init.name = pll_clk_name[i];
...@@ -684,7 +726,7 @@ static int cdce925_probe(struct i2c_client *client, ...@@ -684,7 +726,7 @@ static int cdce925_probe(struct i2c_client *client,
init.ops = &cdce925_clk_ops; init.ops = &cdce925_clk_ops;
init.flags = CLK_SET_RATE_PARENT; init.flags = CLK_SET_RATE_PARENT;
init.num_parents = 1; init.num_parents = 1;
for (i = 1; i < NUMBER_OF_OUTPUTS; ++i) { for (i = 1; i < data->chip_info->num_outputs; ++i) {
init.name = kasprintf(GFP_KERNEL, "%s.Y%d", init.name = kasprintf(GFP_KERNEL, "%s.Y%d",
client->dev.of_node->name, i+1); client->dev.of_node->name, i+1);
data->clk[i].chip = data; data->clk[i].chip = data;
...@@ -702,6 +744,16 @@ static int cdce925_probe(struct i2c_client *client, ...@@ -702,6 +744,16 @@ static int cdce925_probe(struct i2c_client *client,
/* Mux Y4/5 to PLL2 */ /* Mux Y4/5 to PLL2 */
init.parent_names = &pll_clk_name[1]; init.parent_names = &pll_clk_name[1];
break; break;
case 5:
case 6:
/* Mux Y6/7 to PLL3 */
init.parent_names = &pll_clk_name[2];
break;
case 7:
case 8:
/* Mux Y8/9 to PLL4 */
init.parent_names = &pll_clk_name[3];
break;
} }
err = devm_clk_hw_register(&client->dev, &data->clk[i].hw); err = devm_clk_hw_register(&client->dev, &data->clk[i].hw);
kfree(init.name); /* clock framework made a copy of the name */ kfree(init.name); /* clock framework made a copy of the name */
...@@ -720,7 +772,7 @@ static int cdce925_probe(struct i2c_client *client, ...@@ -720,7 +772,7 @@ static int cdce925_probe(struct i2c_client *client,
err = 0; err = 0;
error: error:
for (i = 0; i < NUMBER_OF_PLLS; ++i) for (i = 0; i < data->chip_info->num_plls; ++i)
/* clock framework made a copy of the name */ /* clock framework made a copy of the name */
kfree(pll_clk_name[i]); kfree(pll_clk_name[i]);
...@@ -728,13 +780,19 @@ static int cdce925_probe(struct i2c_client *client, ...@@ -728,13 +780,19 @@ static int cdce925_probe(struct i2c_client *client,
} }
static const struct i2c_device_id cdce925_id[] = { static const struct i2c_device_id cdce925_id[] = {
{ "cdce925", 0 }, { "cdce913", CDCE913 },
{ "cdce925", CDCE925 },
{ "cdce937", CDCE937 },
{ "cdce949", CDCE949 },
{ } { }
}; };
MODULE_DEVICE_TABLE(i2c, cdce925_id); MODULE_DEVICE_TABLE(i2c, cdce925_id);
static const struct of_device_id clk_cdce925_of_match[] = { static const struct of_device_id clk_cdce925_of_match[] = {
{ .compatible = "ti,cdce913" },
{ .compatible = "ti,cdce925" }, { .compatible = "ti,cdce925" },
{ .compatible = "ti,cdce937" },
{ .compatible = "ti,cdce949" },
{ }, { },
}; };
MODULE_DEVICE_TABLE(of, clk_cdce925_of_match); MODULE_DEVICE_TABLE(of, clk_cdce925_of_match);
...@@ -750,5 +808,5 @@ static struct i2c_driver cdce925_driver = { ...@@ -750,5 +808,5 @@ static struct i2c_driver cdce925_driver = {
module_i2c_driver(cdce925_driver); module_i2c_driver(cdce925_driver);
MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>"); MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
MODULE_DESCRIPTION("cdce925 driver"); MODULE_DESCRIPTION("TI CDCE913/925/937/949 driver");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment