V4L/DVB (4835): Added support for the Terratec Cinergy HT PCMCIA module

This is a hybrid cardbus module. Besides the card support, i 
modified the definition names for AGC and GPIO of the tda10046.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Documentation/video4linux/CARDLIST.saa7134

@@ -103,3 +103,4 @@
 102 -> Avermedia AVerTV Studio 507              [1461:9715]
 103 -> Compro Videomate DVB-T200A
 104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid     [0070:6701]
+105 -> Terratec Cinergy HT PCMCIA               [153b:1172]

drivers/media/dvb/frontends/tda1004x.c

@@ -648,18 +648,24 @@ static int tda10046_init(struct dvb_frontend* fe)
 		tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
 		tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x00); // set AGC polarities
 		break;
-	case TDA10046_AGC_TDA827X:
+	case TDA10046_AGC_TDA827X_GP11:
 		tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
 		tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
 		tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
 		tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x6a); // set AGC polarities
 		break;
-	case TDA10046_AGC_TDA827X_GPL:
+	case TDA10046_AGC_TDA827X_GP00:
 		tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
 		tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
 		tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
 		tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
 		break;
+	case TDA10046_AGC_TDA827X_GP01:
+		tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
+		tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
+		tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
+		tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x62); // set AGC polarities
+		break;
 	}
 	tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
 	tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on

drivers/media/dvb/frontends/tda1004x.h

@@ -35,8 +35,9 @@ enum tda10046_agc {
 	TDA10046_AGC_DEFAULT,		/* original configuration */
 	TDA10046_AGC_IFO_AUTO_NEG,	/* IF AGC only, automatic, negtive */
 	TDA10046_AGC_IFO_AUTO_POS,	/* IF AGC only, automatic, positive */
-	TDA10046_AGC_TDA827X,		/* IF AGC only, special setup for tda827x */
-	TDA10046_AGC_TDA827X_GPL,	/* same as above, but GPIOs 0 */
+	TDA10046_AGC_TDA827X_GP11,	/* IF AGC only, special setup for tda827x */
+	TDA10046_AGC_TDA827X_GP00,	/* same as above, but GPIOs 0 */
+	TDA10046_AGC_TDA827X_GP01,	/* same as above, but GPIO3=0 GPIO1=1*/
 };
 
 enum tda10046_if {

drivers/media/video/saa7134/saa7134-cards.c

@@ -3148,6 +3148,29 @@ struct saa7134_board saa7134_boards[] = {
 			.gpio   = 0x0200000,
 		},
 	},
+	[SAA7134_BOARD_CINERGY_HT_PCMCIA] = {
+		.name           = "Terratec Cinergy HT PCMCIA",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_TDA8290,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.mpeg           = SAA7134_MPEG_DVB,
+		.inputs = {{
+			.name   = name_tv,
+			.vmux   = 1,
+			.amux   = TV,
+			.tv     = 1,
+		},{
+			.name   = name_comp1,
+			.vmux   = 0,
+			.amux   = LINE1,
+		},{
+			.name   = name_svideo,
+			.vmux   = 6,
+			.amux   = LINE1,
+		}},
+	},
 };
 
 const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -3780,6 +3803,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subvendor    = 0x0070,
 		.subdevice    = 0x6701,
 		.driver_data  = SAA7134_BOARD_HAUPPAUGE_HVR1110,
+	},{
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x153b,
+		.subdevice    = 0x1172,
+		.driver_data  = SAA7134_BOARD_CINERGY_HT_PCMCIA,
 	},{
 		/* --- boards without eeprom + subsystem ID --- */
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
@@ -4107,6 +4136,14 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 		i2c_transfer(&dev->i2c_adap, &msg, 1);
 		}
 		break;
+	case SAA7134_BOARD_CINERGY_HT_PCMCIA:
+		/* make the tda10046 find its eeprom */
+		{
+		u8 data[] = { 0x3c, 0x33, 0x60};
+		struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+		i2c_transfer(&dev->i2c_adap, &msg, 1);
+		}
+		break;
 	case SAA7134_BOARD_KWORLD_ATSC110:
 		{
 			/* enable tuner */

drivers/media/video/saa7134/saa7134-dvb.c

@@ -677,7 +677,7 @@ static struct tda1004x_config tda827x_lifeview_config = {
 	.invert        = 1,
 	.invert_oclk   = 0,
 	.xtal_freq     = TDA10046_XTAL_16M,
-	.agc_config    = TDA10046_AGC_TDA827X,
+	.agc_config    = TDA10046_AGC_TDA827X_GP11,
 	.if_freq       = TDA10046_FREQ_045,
 	.request_firmware = NULL,
 };
@@ -881,7 +881,40 @@ static struct tda1004x_config philips_tiger_config = {
 	.invert        = 1,
 	.invert_oclk   = 0,
 	.xtal_freq     = TDA10046_XTAL_16M,
-	.agc_config    = TDA10046_AGC_TDA827X,
+	.agc_config    = TDA10046_AGC_TDA827X_GP11,
+	.if_freq       = TDA10046_FREQ_045,
+	.request_firmware = NULL,
+};
+/* ------------------------------------------------------------------ */
+
+static int cinergy_ht_tuner_init(struct dvb_frontend *fe)
+{
+	struct saa7134_dev *dev = fe->dvb->priv;
+	static u8 data[] = { 0x3c, 0x33, 0x62};
+	struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+
+	if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
+		return -EIO;
+	return 0;
+}
+
+static int cinergy_ht_tuner_sleep(struct dvb_frontend *fe)
+{
+	struct saa7134_dev *dev = fe->dvb->priv;
+	static u8 data[] = { 0x3c, 0x33, 0x60};
+	struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+
+	i2c_transfer(&dev->i2c_adap, &msg, 1);
+	philips_tda827xa_tuner_sleep( 0x61, fe);
+	return 0;
+}
+
+static struct tda1004x_config cinergy_ht_config = {
+	.demod_address = 0x08,
+	.invert        = 1,
+	.invert_oclk   = 0,
+	.xtal_freq     = TDA10046_XTAL_16M,
+	.agc_config    = TDA10046_AGC_TDA827X_GP01,
 	.if_freq       = TDA10046_FREQ_045,
 	.request_firmware = NULL,
 };
@@ -893,7 +926,7 @@ static struct tda1004x_config pinnacle_pctv_310i_config = {
 	.invert        = 1,
 	.invert_oclk   = 0,
 	.xtal_freq     = TDA10046_XTAL_16M,
-	.agc_config    = TDA10046_AGC_TDA827X,
+	.agc_config    = TDA10046_AGC_TDA827X_GP11,
 	.if_freq       = TDA10046_FREQ_045,
 	.request_firmware = philips_tda1004x_request_firmware,
 };
@@ -905,7 +938,7 @@ static struct tda1004x_config hauppauge_hvr_1110_config = {
 	.invert        = 1,
 	.invert_oclk   = 0,
 	.xtal_freq     = TDA10046_XTAL_16M,
-	.agc_config    = TDA10046_AGC_TDA827X,
+	.agc_config    = TDA10046_AGC_TDA827X_GP11,
 	.if_freq       = TDA10046_FREQ_045,
 	.request_firmware = philips_tda1004x_request_firmware,
 };
@@ -917,7 +950,7 @@ static struct tda1004x_config asus_p7131_dual_config = {
 	.invert        = 1,
 	.invert_oclk   = 0,
 	.xtal_freq     = TDA10046_XTAL_16M,
-	.agc_config    = TDA10046_AGC_TDA827X,
+	.agc_config    = TDA10046_AGC_TDA827X_GP11,
 	.if_freq       = TDA10046_FREQ_045,
 	.request_firmware = philips_tda1004x_request_firmware,
 };
@@ -969,7 +1002,7 @@ static struct tda1004x_config lifeview_trio_config = {
 	.invert        = 1,
 	.invert_oclk   = 0,
 	.xtal_freq     = TDA10046_XTAL_16M,
-	.agc_config    = TDA10046_AGC_TDA827X_GPL,
+	.agc_config    = TDA10046_AGC_TDA827X_GP00,
 	.if_freq       = TDA10046_FREQ_045,
 	.request_firmware = NULL,
 };
@@ -1006,7 +1039,7 @@ static struct tda1004x_config ads_tech_duo_config = {
 	.invert        = 1,
 	.invert_oclk   = 0,
 	.xtal_freq     = TDA10046_XTAL_16M,
-	.agc_config    = TDA10046_AGC_TDA827X_GPL,
+	.agc_config    = TDA10046_AGC_TDA827X_GP00,
 	.if_freq       = TDA10046_FREQ_045,
 	.request_firmware = NULL,
 };
@@ -1031,7 +1064,7 @@ static struct tda1004x_config tevion_dvbt220rf_config = {
 	.invert        = 1,
 	.invert_oclk   = 0,
 	.xtal_freq     = TDA10046_XTAL_16M,
-	.agc_config    = TDA10046_AGC_TDA827X,
+	.agc_config    = TDA10046_AGC_TDA827X_GP11,
 	.if_freq       = TDA10046_FREQ_045,
 	.request_firmware = NULL,
 };
@@ -1076,7 +1109,7 @@ static struct tda1004x_config md8800_dvbt_config = {
 	.invert        = 1,
 	.invert_oclk   = 0,
 	.xtal_freq     = TDA10046_XTAL_16M,
-	.agc_config    = TDA10046_AGC_TDA827X,
+	.agc_config    = TDA10046_AGC_TDA827X_GP11,
 	.if_freq       = TDA10046_FREQ_045,
 	.request_firmware = NULL,
 };
@@ -1362,6 +1395,18 @@ static int dvb_init(struct saa7134_dev *dev)
 			dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
 		}
 		break;
+	case SAA7134_BOARD_CINERGY_HT_PCMCIA:
+		dev->dvb.frontend = dvb_attach(tda10046_attach,
+					       &cinergy_ht_config,
+					       &dev->i2c_adap);
+		if (dev->dvb.frontend) {
+			dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
+			dev->dvb.frontend->ops.tuner_ops.init = cinergy_ht_tuner_init;
+			dev->dvb.frontend->ops.tuner_ops.sleep = cinergy_ht_tuner_sleep;
+			dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
+
+		}
+		break;
 	default:
 		printk("%s: Huh? unknown DVB card?\n",dev->name);
 		break;

drivers/media/video/saa7134/saa7134.h

@@ -231,6 +231,7 @@ struct saa7134_format {
 #define SAA7134_BOARD_AVERMEDIA_STUDIO_507 102
 #define SAA7134_BOARD_VIDEOMATE_DVBT_200A  103
 #define SAA7134_BOARD_HAUPPAUGE_HVR1110    104
+#define SAA7134_BOARD_CINERGY_HT_PCMCIA    105
 
 #define SAA7134_MAXBOARDS 8
 #define SAA7134_INPUT_MAX 8