Commit 551f40c4 authored by David S. Miller's avatar David S. Miller

Merge branch 'dsa-add-Microchip-KSZ9477-DSA-driver'

Woojung Huh says:

====================
dsa: add Microchip KSZ9477 DSA driver

This series of patches is for Microchip KSZ9477 DSA driver.
KSZ9477 is 7 ports GigE switch with numerous advanced features.
5 ports are 10/100/1000 Mbps internal PHYs and 2 ports have
Interfaces to SGMII, RGMII, MII or RMII.

This patch supports VLAN, MDB, FDB and port mirroring offloads.

Welcome reviews and comments from community.

Note: Tests are performed on internal development board.

V5
- add missing MODULE_LICENSE

V4
- update per review comments
- cosmetic changes
- net/dsa/tag_ksz.c
  * skb_put() & memset() are changed to skb_put_padto()
- drivers/net/dsa/microchip/ksz_common.
   * vlan access mutex is updated
   * mib_names[] is changed to static const

V3
- update per review comments
- cosmetic changes
- drivers/net/dsa/microchip/ksz_common.c
  * clean up ksz_switch_chips[]
  * consolidate checking loops into functions
  * update mutex for better locking
  * replace devm_kmalloc_array() to devm_kcalloc()
- MAINTAINERS
  * add missing net/dsa/tag_ksz.c

V2
- update per review comments
- several cosmetic changes
- net/dsa/tag_ksz.c
  * constants are changed to defines
  * remove skb_linearize() in ksz_rcv()
  * ksz_xmit()checks skb tailroom before allocate new skb
- drivers/net/phy/micrel.c
  * remove PHY_HAS_MAGICANEG from ksphy_driver[]
- drivers/net/dsa/microchip/ksz_common.c
  * add timeout to avoid endless loop
  * port initialization is move to ksz_port_enable() instead of  ksz_setup_ports()
- Documentation/devicetree/bindings/net/dsa/ksz.txt
  * fix typo and indentations
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 6c21a2a6 419585a9
Microchip KSZ Series Ethernet switches
==================================
Required properties:
- compatible: For external switch chips, compatible string must be exactly one
of: "microchip,ksz9477"
See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
required and optional properties.
Examples:
Ethernet switch connected via SPI to the host, CPU port wired to eth0:
eth0: ethernet@10001000 {
fixed-link {
speed = <1000>;
full-duplex;
};
};
spi1: spi@f8008000 {
pinctrl-0 = <&pinctrl_spi_ksz>;
cs-gpios = <&pioC 25 0>;
id = <1>;
status = "okay";
ksz9477: ksz9477@0 {
compatible = "microchip,ksz9477";
reg = <0>;
spi-max-frequency = <44000000>;
spi-cpha;
spi-cpol;
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@4 {
reg = <4>;
label = "lan5";
};
port@5 {
reg = <5>;
label = "cpu";
ethernet = <&eth0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
......@@ -8479,6 +8479,16 @@ F: drivers/media/platform/atmel/atmel-isc.c
F: drivers/media/platform/atmel/atmel-isc-regs.h
F: devicetree/bindings/media/atmel-isc.txt
MICROCHIP KSZ SERIES ETHERNET SWITCH DRIVER
M: Woojung Huh <Woojung.Huh@microchip.com>
M: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
L: netdev@vger.kernel.org
S: Maintained
F: net/dsa/tag_ksz.c
F: drivers/net/dsa/microchip/*
F: include/linux/platform_data/microchip-ksz.h
F: Documentation/devicetree/bindings/net/dsa/ksz.txt
MICROCHIP USB251XB DRIVER
M: Richard Leitner <richard.leitner@skidata.com>
L: linux-usb@vger.kernel.org
......
......@@ -39,6 +39,8 @@ config NET_DSA_MV88E6060
This enables support for the Marvell 88E6060 ethernet switch
chip.
source "drivers/net/dsa/microchip/Kconfig"
source "drivers/net/dsa/mv88e6xxx/Kconfig"
config NET_DSA_QCA8K
......
......@@ -8,4 +8,5 @@ obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o
obj-y += b53/
obj-y += microchip/
obj-y += mv88e6xxx/
menuconfig MICROCHIP_KSZ
tristate "Microchip KSZ series switch support"
depends on NET_DSA
select NET_DSA_TAG_KSZ
help
This driver adds support for Microchip KSZ switch chips.
config MICROCHIP_KSZ_SPI_DRIVER
tristate "KSZ series SPI connected switch driver"
depends on MICROCHIP_KSZ && SPI
help
Select to enable support for registering switches configured through SPI.
obj-$(CONFIG_MICROCHIP_KSZ) += ksz_common.o
obj-$(CONFIG_MICROCHIP_KSZ_SPI_DRIVER) += ksz_spi.o
/*
* Microchip KSZ9477 register definitions
*
* Copyright (C) 2017
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef __KSZ9477_REGS_H
#define __KSZ9477_REGS_H
#define KS_PRIO_M 0x7
#define KS_PRIO_S 4
/* 0 - Operation */
#define REG_CHIP_ID0__1 0x0000
#define REG_CHIP_ID1__1 0x0001
#define FAMILY_ID 0x95
#define FAMILY_ID_94 0x94
#define FAMILY_ID_95 0x95
#define FAMILY_ID_85 0x85
#define FAMILY_ID_98 0x98
#define FAMILY_ID_88 0x88
#define REG_CHIP_ID2__1 0x0002
#define CHIP_ID_63 0x63
#define CHIP_ID_66 0x66
#define CHIP_ID_67 0x67
#define CHIP_ID_77 0x77
#define CHIP_ID_93 0x93
#define CHIP_ID_96 0x96
#define CHIP_ID_97 0x97
#define REG_CHIP_ID3__1 0x0003
#define SWITCH_REVISION_M 0x0F
#define SWITCH_REVISION_S 4
#define SWITCH_RESET 0x01
#define REG_SW_PME_CTRL 0x0006
#define PME_ENABLE BIT(1)
#define PME_POLARITY BIT(0)
#define REG_GLOBAL_OPTIONS 0x000F
#define SW_GIGABIT_ABLE BIT(6)
#define SW_REDUNDANCY_ABLE BIT(5)
#define SW_AVB_ABLE BIT(4)
#define SW_9567_RL_5_2 0xC
#define SW_9477_SL_5_2 0xD
#define SW_9896_GL_5_1 0xB
#define SW_9896_RL_5_1 0x8
#define SW_9896_SL_5_1 0x9
#define SW_9895_GL_4_1 0x7
#define SW_9895_RL_4_1 0x4
#define SW_9895_SL_4_1 0x5
#define SW_9896_RL_4_2 0x6
#define SW_9893_RL_2_1 0x0
#define SW_9893_SL_2_1 0x1
#define SW_9893_GL_2_1 0x3
#define SW_QW_ABLE BIT(5)
#define SW_9893_RN_2_1 0xC
#define REG_SW_INT_STATUS__4 0x0010
#define REG_SW_INT_MASK__4 0x0014
#define LUE_INT BIT(31)
#define TRIG_TS_INT BIT(30)
#define APB_TIMEOUT_INT BIT(29)
#define SWITCH_INT_MASK (TRIG_TS_INT | APB_TIMEOUT_INT)
#define REG_SW_PORT_INT_STATUS__4 0x0018
#define REG_SW_PORT_INT_MASK__4 0x001C
#define REG_SW_PHY_INT_STATUS 0x0020
#define REG_SW_PHY_INT_ENABLE 0x0024
/* 1 - Global */
#define REG_SW_GLOBAL_SERIAL_CTRL_0 0x0100
#define SW_SPARE_REG_2 BIT(7)
#define SW_SPARE_REG_1 BIT(6)
#define SW_SPARE_REG_0 BIT(5)
#define SW_BIG_ENDIAN BIT(4)
#define SPI_AUTO_EDGE_DETECTION BIT(1)
#define SPI_CLOCK_OUT_RISING_EDGE BIT(0)
#define REG_SW_GLOBAL_OUTPUT_CTRL__1 0x0103
#define SW_ENABLE_REFCLKO BIT(1)
#define SW_REFCLKO_IS_125MHZ BIT(0)
#define REG_SW_IBA__4 0x0104
#define SW_IBA_ENABLE BIT(31)
#define SW_IBA_DA_MATCH BIT(30)
#define SW_IBA_INIT BIT(29)
#define SW_IBA_QID_M 0xF
#define SW_IBA_QID_S 22
#define SW_IBA_PORT_M 0x2F
#define SW_IBA_PORT_S 16
#define SW_IBA_FRAME_TPID_M 0xFFFF
#define REG_SW_APB_TIMEOUT_ADDR__4 0x0108
#define APB_TIMEOUT_ACKNOWLEDGE BIT(31)
#define REG_SW_IBA_SYNC__1 0x010C
#define REG_SW_IO_STRENGTH__1 0x010D
#define SW_DRIVE_STRENGTH_M 0x7
#define SW_DRIVE_STRENGTH_2MA 0
#define SW_DRIVE_STRENGTH_4MA 1
#define SW_DRIVE_STRENGTH_8MA 2
#define SW_DRIVE_STRENGTH_12MA 3
#define SW_DRIVE_STRENGTH_16MA 4
#define SW_DRIVE_STRENGTH_20MA 5
#define SW_DRIVE_STRENGTH_24MA 6
#define SW_DRIVE_STRENGTH_28MA 7
#define SW_HI_SPEED_DRIVE_STRENGTH_S 4
#define SW_LO_SPEED_DRIVE_STRENGTH_S 0
#define REG_SW_IBA_STATUS__4 0x0110
#define SW_IBA_REQ BIT(31)
#define SW_IBA_RESP BIT(30)
#define SW_IBA_DA_MISMATCH BIT(14)
#define SW_IBA_FMT_MISMATCH BIT(13)
#define SW_IBA_CODE_ERROR BIT(12)
#define SW_IBA_CMD_ERROR BIT(11)
#define SW_IBA_CMD_LOC_M (BIT(6) - 1)
#define REG_SW_IBA_STATES__4 0x0114
#define SW_IBA_BUF_STATE_S 30
#define SW_IBA_CMD_STATE_S 28
#define SW_IBA_RESP_STATE_S 26
#define SW_IBA_STATE_M 0x3
#define SW_IBA_PACKET_SIZE_M 0x7F
#define SW_IBA_PACKET_SIZE_S 16
#define SW_IBA_FMT_ID_M 0xFFFF
#define REG_SW_IBA_RESULT__4 0x0118
#define SW_IBA_SIZE_S 24
#define SW_IBA_RETRY_CNT_M (BIT(5) - 1)
/* 2 - PHY */
#define REG_SW_POWER_MANAGEMENT_CTRL 0x0201
#define SW_PLL_POWER_DOWN BIT(5)
#define SW_POWER_DOWN_MODE 0x3
#define SW_ENERGY_DETECTION 1
#define SW_SOFT_POWER_DOWN 2
#define SW_POWER_SAVING 3
/* 3 - Operation Control */
#define REG_SW_OPERATION 0x0300
#define SW_DOUBLE_TAG BIT(7)
#define SW_RESET BIT(1)
#define SW_START BIT(0)
#define REG_SW_MAC_ADDR_0 0x0302
#define REG_SW_MAC_ADDR_1 0x0303
#define REG_SW_MAC_ADDR_2 0x0304
#define REG_SW_MAC_ADDR_3 0x0305
#define REG_SW_MAC_ADDR_4 0x0306
#define REG_SW_MAC_ADDR_5 0x0307
#define REG_SW_MTU__2 0x0308
#define REG_SW_ISP_TPID__2 0x030A
#define REG_SW_HSR_TPID__2 0x030C
#define REG_AVB_STRATEGY__2 0x030E
#define SW_SHAPING_CREDIT_ACCT BIT(1)
#define SW_POLICING_CREDIT_ACCT BIT(0)
#define REG_SW_LUE_CTRL_0 0x0310
#define SW_VLAN_ENABLE BIT(7)
#define SW_DROP_INVALID_VID BIT(6)
#define SW_AGE_CNT_M 0x7
#define SW_AGE_CNT_S 3
#define SW_RESV_MCAST_ENABLE BIT(2)
#define SW_HASH_OPTION_M 0x03
#define SW_HASH_OPTION_CRC 1
#define SW_HASH_OPTION_XOR 2
#define SW_HASH_OPTION_DIRECT 3
#define REG_SW_LUE_CTRL_1 0x0311
#define UNICAST_LEARN_DISABLE BIT(7)
#define SW_SRC_ADDR_FILTER BIT(6)
#define SW_FLUSH_STP_TABLE BIT(5)
#define SW_FLUSH_MSTP_TABLE BIT(4)
#define SW_FWD_MCAST_SRC_ADDR BIT(3)
#define SW_AGING_ENABLE BIT(2)
#define SW_FAST_AGING BIT(1)
#define SW_LINK_AUTO_AGING BIT(0)
#define REG_SW_LUE_CTRL_2 0x0312
#define SW_TRAP_DOUBLE_TAG BIT(6)
#define SW_EGRESS_VLAN_FILTER_DYN BIT(5)
#define SW_EGRESS_VLAN_FILTER_STA BIT(4)
#define SW_FLUSH_OPTION_M 0x3
#define SW_FLUSH_OPTION_S 2
#define SW_FLUSH_OPTION_DYN_MAC 1
#define SW_FLUSH_OPTION_STA_MAC 2
#define SW_FLUSH_OPTION_BOTH 3
#define SW_PRIO_M 0x3
#define SW_PRIO_DA 0
#define SW_PRIO_SA 1
#define SW_PRIO_HIGHEST_DA_SA 2
#define SW_PRIO_LOWEST_DA_SA 3
#define REG_SW_LUE_CTRL_3 0x0313
#define REG_SW_LUE_INT_STATUS 0x0314
#define REG_SW_LUE_INT_ENABLE 0x0315
#define LEARN_FAIL_INT BIT(2)
#define ALMOST_FULL_INT BIT(1)
#define WRITE_FAIL_INT BIT(0)
#define REG_SW_LUE_INDEX_0__2 0x0316
#define ENTRY_INDEX_M 0x0FFF
#define REG_SW_LUE_INDEX_1__2 0x0318
#define FAIL_INDEX_M 0x03FF
#define REG_SW_LUE_INDEX_2__2 0x031A
#define REG_SW_LUE_UNK_UCAST_CTRL__4 0x0320
#define SW_UNK_UCAST_ENABLE BIT(31)
#define REG_SW_LUE_UNK_MCAST_CTRL__4 0x0324
#define SW_UNK_MCAST_ENABLE BIT(31)
#define REG_SW_LUE_UNK_VID_CTRL__4 0x0328
#define SW_UNK_VID_ENABLE BIT(31)
#define REG_SW_MAC_CTRL_0 0x0330
#define SW_NEW_BACKOFF BIT(7)
#define SW_CHECK_LENGTH BIT(3)
#define SW_PAUSE_UNH_MODE BIT(1)
#define SW_AGGR_BACKOFF BIT(0)
#define REG_SW_MAC_CTRL_1 0x0331
#define MULTICAST_STORM_DISABLE BIT(6)
#define SW_BACK_PRESSURE BIT(5)
#define FAIR_FLOW_CTRL BIT(4)
#define NO_EXC_COLLISION_DROP BIT(3)
#define SW_JUMBO_PACKET BIT(2)
#define SW_LEGAL_PACKET_DISABLE BIT(1)
#define SW_PASS_SHORT_FRAME BIT(0)
#define REG_SW_MAC_CTRL_2 0x0332
#define SW_REPLACE_VID BIT(3)
#define BROADCAST_STORM_RATE_HI 0x07
#define REG_SW_MAC_CTRL_3 0x0333
#define BROADCAST_STORM_RATE_LO 0xFF
#define BROADCAST_STORM_RATE 0x07FF
#define REG_SW_MAC_CTRL_4 0x0334
#define SW_PASS_PAUSE BIT(3)
#define REG_SW_MAC_CTRL_5 0x0335
#define SW_OUT_RATE_LIMIT_QUEUE_BASED BIT(3)
#define REG_SW_MAC_CTRL_6 0x0336
#define SW_MIB_COUNTER_FLUSH BIT(7)
#define SW_MIB_COUNTER_FREEZE BIT(6)
#define REG_SW_MAC_802_1P_MAP_0 0x0338
#define REG_SW_MAC_802_1P_MAP_1 0x0339
#define REG_SW_MAC_802_1P_MAP_2 0x033A
#define REG_SW_MAC_802_1P_MAP_3 0x033B
#define SW_802_1P_MAP_M KS_PRIO_M
#define SW_802_1P_MAP_S KS_PRIO_S
#define REG_SW_MAC_ISP_CTRL 0x033C
#define REG_SW_MAC_TOS_CTRL 0x033E
#define SW_TOS_DSCP_REMARK BIT(1)
#define SW_TOS_DSCP_REMAP BIT(0)
#define REG_SW_MAC_TOS_PRIO_0 0x0340
#define REG_SW_MAC_TOS_PRIO_1 0x0341
#define REG_SW_MAC_TOS_PRIO_2 0x0342
#define REG_SW_MAC_TOS_PRIO_3 0x0343
#define REG_SW_MAC_TOS_PRIO_4 0x0344
#define REG_SW_MAC_TOS_PRIO_5 0x0345
#define REG_SW_MAC_TOS_PRIO_6 0x0346
#define REG_SW_MAC_TOS_PRIO_7 0x0347
#define REG_SW_MAC_TOS_PRIO_8 0x0348
#define REG_SW_MAC_TOS_PRIO_9 0x0349
#define REG_SW_MAC_TOS_PRIO_10 0x034A
#define REG_SW_MAC_TOS_PRIO_11 0x034B
#define REG_SW_MAC_TOS_PRIO_12 0x034C
#define REG_SW_MAC_TOS_PRIO_13 0x034D
#define REG_SW_MAC_TOS_PRIO_14 0x034E
#define REG_SW_MAC_TOS_PRIO_15 0x034F
#define REG_SW_MAC_TOS_PRIO_16 0x0350
#define REG_SW_MAC_TOS_PRIO_17 0x0351
#define REG_SW_MAC_TOS_PRIO_18 0x0352
#define REG_SW_MAC_TOS_PRIO_19 0x0353
#define REG_SW_MAC_TOS_PRIO_20 0x0354
#define REG_SW_MAC_TOS_PRIO_21 0x0355
#define REG_SW_MAC_TOS_PRIO_22 0x0356
#define REG_SW_MAC_TOS_PRIO_23 0x0357
#define REG_SW_MAC_TOS_PRIO_24 0x0358
#define REG_SW_MAC_TOS_PRIO_25 0x0359
#define REG_SW_MAC_TOS_PRIO_26 0x035A
#define REG_SW_MAC_TOS_PRIO_27 0x035B
#define REG_SW_MAC_TOS_PRIO_28 0x035C
#define REG_SW_MAC_TOS_PRIO_29 0x035D
#define REG_SW_MAC_TOS_PRIO_30 0x035E
#define REG_SW_MAC_TOS_PRIO_31 0x035F
#define REG_SW_MRI_CTRL_0 0x0370
#define SW_IGMP_SNOOP BIT(6)
#define SW_IPV6_MLD_OPTION BIT(3)
#define SW_IPV6_MLD_SNOOP BIT(2)
#define SW_MIRROR_RX_TX BIT(0)
#define REG_SW_CLASS_D_IP_CTRL__4 0x0374
#define SW_CLASS_D_IP_ENABLE BIT(31)
#define REG_SW_MRI_CTRL_8 0x0378
#define SW_NO_COLOR_S 6
#define SW_RED_COLOR_S 4
#define SW_YELLOW_COLOR_S 2
#define SW_GREEN_COLOR_S 0
#define SW_COLOR_M 0x3
#define REG_SW_QM_CTRL__4 0x0390
#define PRIO_SCHEME_SELECT_M KS_PRIO_M
#define PRIO_SCHEME_SELECT_S 6
#define PRIO_MAP_3_HI 0
#define PRIO_MAP_2_HI 2
#define PRIO_MAP_0_LO 3
#define UNICAST_VLAN_BOUNDARY BIT(1)
#define REG_SW_EEE_QM_CTRL__2 0x03C0
#define REG_SW_EEE_TXQ_WAIT_TIME__2 0x03C2
/* 4 - */
#define REG_SW_VLAN_ENTRY__4 0x0400
#define VLAN_VALID BIT(31)
#define VLAN_FORWARD_OPTION BIT(27)
#define VLAN_PRIO_M KS_PRIO_M
#define VLAN_PRIO_S 24
#define VLAN_MSTP_M 0x7
#define VLAN_MSTP_S 12
#define VLAN_FID_M 0x7F
#define REG_SW_VLAN_ENTRY_UNTAG__4 0x0404
#define REG_SW_VLAN_ENTRY_PORTS__4 0x0408
#define REG_SW_VLAN_ENTRY_INDEX__2 0x040C
#define VLAN_INDEX_M 0x0FFF
#define REG_SW_VLAN_CTRL 0x040E
#define VLAN_START BIT(7)
#define VLAN_ACTION 0x3
#define VLAN_WRITE 1
#define VLAN_READ 2
#define VLAN_CLEAR 3
#define REG_SW_ALU_INDEX_0 0x0410
#define ALU_FID_INDEX_S 16
#define ALU_MAC_ADDR_HI 0xFFFF
#define REG_SW_ALU_INDEX_1 0x0414
#define ALU_DIRECT_INDEX_M (BIT(12) - 1)
#define REG_SW_ALU_CTRL__4 0x0418
#define ALU_VALID_CNT_M (BIT(14) - 1)
#define ALU_VALID_CNT_S 16
#define ALU_START BIT(7)
#define ALU_VALID BIT(6)
#define ALU_DIRECT BIT(2)
#define ALU_ACTION 0x3
#define ALU_WRITE 1
#define ALU_READ 2
#define ALU_SEARCH 3
#define REG_SW_ALU_STAT_CTRL__4 0x041C
#define ALU_STAT_INDEX_M (BIT(4) - 1)
#define ALU_STAT_INDEX_S 16
#define ALU_RESV_MCAST_INDEX_M (BIT(6) - 1)
#define ALU_STAT_START BIT(7)
#define ALU_RESV_MCAST_ADDR BIT(1)
#define ALU_STAT_READ BIT(0)
#define REG_SW_ALU_VAL_A 0x0420
#define ALU_V_STATIC_VALID BIT(31)
#define ALU_V_SRC_FILTER BIT(30)
#define ALU_V_DST_FILTER BIT(29)
#define ALU_V_PRIO_AGE_CNT_M (BIT(3) - 1)
#define ALU_V_PRIO_AGE_CNT_S 26
#define ALU_V_MSTP_M 0x7
#define REG_SW_ALU_VAL_B 0x0424
#define ALU_V_OVERRIDE BIT(31)
#define ALU_V_USE_FID BIT(30)
#define ALU_V_PORT_MAP (BIT(24) - 1)
#define REG_SW_ALU_VAL_C 0x0428
#define ALU_V_FID_M (BIT(16) - 1)
#define ALU_V_FID_S 16
#define ALU_V_MAC_ADDR_HI 0xFFFF
#define REG_SW_ALU_VAL_D 0x042C
#define REG_HSR_ALU_INDEX_0 0x0440
#define REG_HSR_ALU_INDEX_1 0x0444
#define HSR_DST_MAC_INDEX_LO_S 16
#define HSR_SRC_MAC_INDEX_HI 0xFFFF
#define REG_HSR_ALU_INDEX_2 0x0448
#define HSR_INDEX_MAX BIT(9)
#define HSR_DIRECT_INDEX_M (HSR_INDEX_MAX - 1)
#define REG_HSR_ALU_INDEX_3 0x044C
#define HSR_PATH_INDEX_M (BIT(4) - 1)
#define REG_HSR_ALU_CTRL__4 0x0450
#define HSR_VALID_CNT_M (BIT(14) - 1)
#define HSR_VALID_CNT_S 16
#define HSR_START BIT(7)
#define HSR_VALID BIT(6)
#define HSR_SEARCH_END BIT(5)
#define HSR_DIRECT BIT(2)
#define HSR_ACTION 0x3
#define HSR_WRITE 1
#define HSR_READ 2
#define HSR_SEARCH 3
#define REG_HSR_ALU_VAL_A 0x0454
#define HSR_V_STATIC_VALID BIT(31)
#define HSR_V_AGE_CNT_M (BIT(3) - 1)
#define HSR_V_AGE_CNT_S 26
#define HSR_V_PATH_ID_M (BIT(4) - 1)
#define REG_HSR_ALU_VAL_B 0x0458
#define REG_HSR_ALU_VAL_C 0x045C
#define HSR_V_DST_MAC_ADDR_LO_S 16
#define HSR_V_SRC_MAC_ADDR_HI 0xFFFF
#define REG_HSR_ALU_VAL_D 0x0460
#define REG_HSR_ALU_VAL_E 0x0464
#define HSR_V_START_SEQ_1_S 16
#define HSR_V_START_SEQ_2_S 0
#define REG_HSR_ALU_VAL_F 0x0468
#define HSR_V_EXP_SEQ_1_S 16
#define HSR_V_EXP_SEQ_2_S 0
#define REG_HSR_ALU_VAL_G 0x046C
#define HSR_V_SEQ_CNT_1_S 16
#define HSR_V_SEQ_CNT_2_S 0
#define HSR_V_SEQ_M (BIT(16) - 1)
/* 5 - PTP Clock */
#define REG_PTP_CLK_CTRL 0x0500
#define PTP_STEP_ADJ BIT(6)
#define PTP_STEP_DIR BIT(5)
#define PTP_READ_TIME BIT(4)
#define PTP_LOAD_TIME BIT(3)
#define PTP_CLK_ADJ_ENABLE BIT(2)
#define PTP_CLK_ENABLE BIT(1)
#define PTP_CLK_RESET BIT(0)
#define REG_PTP_RTC_SUB_NANOSEC__2 0x0502
#define PTP_RTC_SUB_NANOSEC_M 0x0007
#define REG_PTP_RTC_NANOSEC 0x0504
#define REG_PTP_RTC_NANOSEC_H 0x0504
#define REG_PTP_RTC_NANOSEC_L 0x0506
#define REG_PTP_RTC_SEC 0x0508
#define REG_PTP_RTC_SEC_H 0x0508
#define REG_PTP_RTC_SEC_L 0x050A
#define REG_PTP_SUBNANOSEC_RATE 0x050C
#define REG_PTP_SUBNANOSEC_RATE_H 0x050C
#define PTP_RATE_DIR BIT(31)
#define PTP_TMP_RATE_ENABLE BIT(30)
#define REG_PTP_SUBNANOSEC_RATE_L 0x050E
#define REG_PTP_RATE_DURATION 0x0510
#define REG_PTP_RATE_DURATION_H 0x0510
#define REG_PTP_RATE_DURATION_L 0x0512
#define REG_PTP_MSG_CONF1 0x0514
#define PTP_802_1AS BIT(7)
#define PTP_ENABLE BIT(6)
#define PTP_ETH_ENABLE BIT(5)
#define PTP_IPV4_UDP_ENABLE BIT(4)
#define PTP_IPV6_UDP_ENABLE BIT(3)
#define PTP_TC_P2P BIT(2)
#define PTP_MASTER BIT(1)
#define PTP_1STEP BIT(0)
#define REG_PTP_MSG_CONF2 0x0516
#define PTP_UNICAST_ENABLE BIT(12)
#define PTP_ALTERNATE_MASTER BIT(11)
#define PTP_ALL_HIGH_PRIO BIT(10)
#define PTP_SYNC_CHECK BIT(9)
#define PTP_DELAY_CHECK BIT(8)
#define PTP_PDELAY_CHECK BIT(7)
#define PTP_DROP_SYNC_DELAY_REQ BIT(5)
#define PTP_DOMAIN_CHECK BIT(4)
#define PTP_UDP_CHECKSUM BIT(2)
#define REG_PTP_DOMAIN_VERSION 0x0518
#define PTP_VERSION_M 0xFF00
#define PTP_DOMAIN_M 0x00FF
#define REG_PTP_UNIT_INDEX__4 0x0520
#define PTP_UNIT_M 0xF
#define PTP_GPIO_INDEX_S 16
#define PTP_TSI_INDEX_S 8
#define PTP_TOU_INDEX_S 0
#define REG_PTP_TRIG_STATUS__4 0x0524
#define TRIG_ERROR_S 16
#define TRIG_DONE_S 0
#define REG_PTP_INT_STATUS__4 0x0528
#define TRIG_INT_S 16
#define TS_INT_S 0
#define TRIG_UNIT_M 0x7
#define TS_UNIT_M 0x3
#define REG_PTP_CTRL_STAT__4 0x052C
#define GPIO_IN BIT(7)
#define GPIO_OUT BIT(6)
#define TS_INT_ENABLE BIT(5)
#define TRIG_ACTIVE BIT(4)
#define TRIG_ENABLE BIT(3)
#define TRIG_RESET BIT(2)
#define TS_ENABLE BIT(1)
#define TS_RESET BIT(0)
#define GPIO_CTRL_M (GPIO_IN | GPIO_OUT)
#define TRIG_CTRL_M \
(TRIG_ACTIVE | TRIG_ENABLE | TRIG_RESET)
#define TS_CTRL_M \
(TS_INT_ENABLE | TS_ENABLE | TS_RESET)
#define REG_TRIG_TARGET_NANOSEC 0x0530
#define REG_TRIG_TARGET_SEC 0x0534
#define REG_TRIG_CTRL__4 0x0538
#define TRIG_CASCADE_ENABLE BIT(31)
#define TRIG_CASCADE_TAIL BIT(30)
#define TRIG_CASCADE_UPS_M 0xF
#define TRIG_CASCADE_UPS_S 26
#define TRIG_NOW BIT(25)
#define TRIG_NOTIFY BIT(24)
#define TRIG_EDGE BIT(23)
#define TRIG_PATTERN_S 20
#define TRIG_PATTERN_M 0x7
#define TRIG_NEG_EDGE 0
#define TRIG_POS_EDGE 1
#define TRIG_NEG_PULSE 2
#define TRIG_POS_PULSE 3
#define TRIG_NEG_PERIOD 4
#define TRIG_POS_PERIOD 5
#define TRIG_REG_OUTPUT 6
#define TRIG_GPO_S 16
#define TRIG_GPO_M 0xF
#define TRIG_CASCADE_ITERATE_CNT_M 0xFFFF
#define REG_TRIG_CYCLE_WIDTH 0x053C
#define REG_TRIG_CYCLE_CNT 0x0540
#define TRIG_CYCLE_CNT_M 0xFFFF
#define TRIG_CYCLE_CNT_S 16
#define TRIG_BIT_PATTERN_M 0xFFFF
#define REG_TRIG_ITERATE_TIME 0x0544
#define REG_TRIG_PULSE_WIDTH__4 0x0548
#define TRIG_PULSE_WIDTH_M 0x00FFFFFF
#define REG_TS_CTRL_STAT__4 0x0550
#define TS_EVENT_DETECT_M 0xF
#define TS_EVENT_DETECT_S 17
#define TS_EVENT_OVERFLOW BIT(16)
#define TS_GPI_M 0xF
#define TS_GPI_S 8
#define TS_DETECT_RISE BIT(7)
#define TS_DETECT_FALL BIT(6)
#define TS_DETECT_S 6
#define TS_CASCADE_TAIL BIT(5)
#define TS_CASCADE_UPS_M 0xF
#define TS_CASCADE_UPS_S 1
#define TS_CASCADE_ENABLE BIT(0)
#define DETECT_RISE (TS_DETECT_RISE >> TS_DETECT_S)
#define DETECT_FALL (TS_DETECT_FALL >> TS_DETECT_S)
#define REG_TS_EVENT_0_NANOSEC 0x0554
#define REG_TS_EVENT_0_SEC 0x0558
#define REG_TS_EVENT_0_SUB_NANOSEC 0x055C
#define REG_TS_EVENT_1_NANOSEC 0x0560
#define REG_TS_EVENT_1_SEC 0x0564
#define REG_TS_EVENT_1_SUB_NANOSEC 0x0568
#define REG_TS_EVENT_2_NANOSEC 0x056C
#define REG_TS_EVENT_2_SEC 0x0570
#define REG_TS_EVENT_2_SUB_NANOSEC 0x0574
#define REG_TS_EVENT_3_NANOSEC 0x0578
#define REG_TS_EVENT_3_SEC 0x057C
#define REG_TS_EVENT_3_SUB_NANOSEC 0x0580
#define REG_TS_EVENT_4_NANOSEC 0x0584
#define REG_TS_EVENT_4_SEC 0x0588
#define REG_TS_EVENT_4_SUB_NANOSEC 0x058C
#define REG_TS_EVENT_5_NANOSEC 0x0590
#define REG_TS_EVENT_5_SEC 0x0594
#define REG_TS_EVENT_5_SUB_NANOSEC 0x0598
#define REG_TS_EVENT_6_NANOSEC 0x059C
#define REG_TS_EVENT_6_SEC 0x05A0
#define REG_TS_EVENT_6_SUB_NANOSEC 0x05A4
#define REG_TS_EVENT_7_NANOSEC 0x05A8
#define REG_TS_EVENT_7_SEC 0x05AC
#define REG_TS_EVENT_7_SUB_NANOSEC 0x05B0
#define TS_EVENT_EDGE_M 0x1
#define TS_EVENT_EDGE_S 30
#define TS_EVENT_NANOSEC_M (BIT(30) - 1)
#define TS_EVENT_SUB_NANOSEC_M 0x7
#define TS_EVENT_SAMPLE \
(REG_TS_EVENT_1_NANOSEC - REG_TS_EVENT_0_NANOSEC)
#define PORT_CTRL_ADDR(port, addr) ((addr) | (((port) + 1) << 12))
#define REG_GLOBAL_RR_INDEX__1 0x0600
/* DLR */
#define REG_DLR_SRC_PORT__4 0x0604
#define DLR_SRC_PORT_UNICAST BIT(31)
#define DLR_SRC_PORT_M 0x3
#define DLR_SRC_PORT_BOTH 0
#define DLR_SRC_PORT_EACH 1
#define REG_DLR_IP_ADDR__4 0x0608
#define REG_DLR_CTRL__1 0x0610
#define DLR_RESET_SEQ_ID BIT(3)
#define DLR_BACKUP_AUTO_ON BIT(2)
#define DLR_BEACON_TX_ENABLE BIT(1)
#define DLR_ASSIST_ENABLE BIT(0)
#define REG_DLR_STATE__1 0x0611
#define DLR_NODE_STATE_M 0x3
#define DLR_NODE_STATE_S 1
#define DLR_NODE_STATE_IDLE 0
#define DLR_NODE_STATE_FAULT 1
#define DLR_NODE_STATE_NORMAL 2
#define DLR_RING_STATE_FAULT 0
#define DLR_RING_STATE_NORMAL 1
#define REG_DLR_PRECEDENCE__1 0x0612
#define REG_DLR_BEACON_INTERVAL__4 0x0614
#define REG_DLR_BEACON_TIMEOUT__4 0x0618
#define REG_DLR_TIMEOUT_WINDOW__4 0x061C
#define DLR_TIMEOUT_WINDOW_M (BIT(22) - 1)
#define REG_DLR_VLAN_ID__2 0x0620
#define DLR_VLAN_ID_M (BIT(12) - 1)
#define REG_DLR_DEST_ADDR_0 0x0622
#define REG_DLR_DEST_ADDR_1 0x0623
#define REG_DLR_DEST_ADDR_2 0x0624
#define REG_DLR_DEST_ADDR_3 0x0625
#define REG_DLR_DEST_ADDR_4 0x0626
#define REG_DLR_DEST_ADDR_5 0x0627
#define REG_DLR_PORT_MAP__4 0x0628
#define REG_DLR_CLASS__1 0x062C
#define DLR_FRAME_QID_M 0x3
/* HSR */
#define REG_HSR_PORT_MAP__4 0x0640
#define REG_HSR_ALU_CTRL_0__1 0x0644
#define HSR_DUPLICATE_DISCARD BIT(7)
#define HSR_NODE_UNICAST BIT(6)
#define HSR_AGE_CNT_DEFAULT_M 0x7
#define HSR_AGE_CNT_DEFAULT_S 3
#define HSR_LEARN_MCAST_DISABLE BIT(2)
#define HSR_HASH_OPTION_M 0x3
#define HSR_HASH_DISABLE 0
#define HSR_HASH_UPPER_BITS 1
#define HSR_HASH_LOWER_BITS 2
#define HSR_HASH_XOR_BOTH_BITS 3
#define REG_HSR_ALU_CTRL_1__1 0x0645
#define HSR_LEARN_UCAST_DISABLE BIT(7)
#define HSR_FLUSH_TABLE BIT(5)
#define HSR_PROC_MCAST_SRC BIT(3)
#define HSR_AGING_ENABLE BIT(2)
#define REG_HSR_ALU_CTRL_2__2 0x0646
#define REG_HSR_ALU_AGE_PERIOD__4 0x0648
#define REG_HSR_ALU_INT_STATUS__1 0x064C
#define REG_HSR_ALU_INT_MASK__1 0x064D
#define HSR_WINDOW_OVERFLOW_INT BIT(3)
#define HSR_LEARN_FAIL_INT BIT(2)
#define HSR_ALMOST_FULL_INT BIT(1)
#define HSR_WRITE_FAIL_INT BIT(0)
#define REG_HSR_ALU_ENTRY_0__2 0x0650
#define HSR_ENTRY_INDEX_M (BIT(10) - 1)
#define HSR_FAIL_INDEX_M (BIT(8) - 1)
#define REG_HSR_ALU_ENTRY_1__2 0x0652
#define HSR_FAIL_LEARN_INDEX_M (BIT(8) - 1)
#define REG_HSR_ALU_ENTRY_3__2 0x0654
#define HSR_CPU_ACCESS_ENTRY_INDEX_M (BIT(8) - 1)
/* 0 - Operation */
#define REG_PORT_DEFAULT_VID 0x0000
#define REG_PORT_CUSTOM_VID 0x0002
#define REG_PORT_AVB_SR_1_VID 0x0004
#define REG_PORT_AVB_SR_2_VID 0x0006
#define REG_PORT_AVB_SR_1_TYPE 0x0008
#define REG_PORT_AVB_SR_2_TYPE 0x000A
#define REG_PORT_PME_STATUS 0x0013
#define REG_PORT_PME_CTRL 0x0017
#define PME_WOL_MAGICPKT BIT(2)
#define PME_WOL_LINKUP BIT(1)
#define PME_WOL_ENERGY BIT(0)
#define REG_PORT_INT_STATUS 0x001B
#define REG_PORT_INT_MASK 0x001F
#define PORT_SGMII_INT BIT(3)
#define PORT_PTP_INT BIT(2)
#define PORT_PHY_INT BIT(1)
#define PORT_ACL_INT BIT(0)
#define PORT_INT_MASK \
(PORT_SGMII_INT | PORT_PTP_INT | PORT_PHY_INT | PORT_ACL_INT)
#define REG_PORT_CTRL_0 0x0020
#define PORT_MAC_LOOPBACK BIT(7)
#define PORT_FORCE_TX_FLOW_CTRL BIT(4)
#define PORT_FORCE_RX_FLOW_CTRL BIT(3)
#define PORT_TAIL_TAG_ENABLE BIT(2)
#define PORT_QUEUE_SPLIT_ENABLE 0x3
#define REG_PORT_CTRL_1 0x0021
#define PORT_SRP_ENABLE 0x3
#define REG_PORT_STATUS_0 0x0030
#define PORT_INTF_SPEED_M 0x3
#define PORT_INTF_SPEED_S 3
#define PORT_INTF_FULL_DUPLEX BIT(2)
#define PORT_TX_FLOW_CTRL BIT(1)
#define PORT_RX_FLOW_CTRL BIT(0)
#define REG_PORT_STATUS_1 0x0034
/* 1 - PHY */
#define REG_PORT_PHY_CTRL 0x0100
#define PORT_PHY_RESET BIT(15)
#define PORT_PHY_LOOPBACK BIT(14)
#define PORT_SPEED_100MBIT BIT(13)
#define PORT_AUTO_NEG_ENABLE BIT(12)
#define PORT_POWER_DOWN BIT(11)
#define PORT_ISOLATE BIT(10)
#define PORT_AUTO_NEG_RESTART BIT(9)
#define PORT_FULL_DUPLEX BIT(8)
#define PORT_COLLISION_TEST BIT(7)
#define PORT_SPEED_1000MBIT BIT(6)
#define REG_PORT_PHY_STATUS 0x0102
#define PORT_100BT4_CAPABLE BIT(15)
#define PORT_100BTX_FD_CAPABLE BIT(14)
#define PORT_100BTX_CAPABLE BIT(13)
#define PORT_10BT_FD_CAPABLE BIT(12)
#define PORT_10BT_CAPABLE BIT(11)
#define PORT_EXTENDED_STATUS BIT(8)
#define PORT_MII_SUPPRESS_CAPABLE BIT(6)
#define PORT_AUTO_NEG_ACKNOWLEDGE BIT(5)
#define PORT_REMOTE_FAULT BIT(4)
#define PORT_AUTO_NEG_CAPABLE BIT(3)
#define PORT_LINK_STATUS BIT(2)
#define PORT_JABBER_DETECT BIT(1)
#define PORT_EXTENDED_CAPABILITY BIT(0)
#define REG_PORT_PHY_ID_HI 0x0104
#define REG_PORT_PHY_ID_LO 0x0106
#define KSZ9477_ID_HI 0x0022
#define KSZ9477_ID_LO 0x1622
#define REG_PORT_PHY_AUTO_NEGOTIATION 0x0108
#define PORT_AUTO_NEG_NEXT_PAGE BIT(15)
#define PORT_AUTO_NEG_REMOTE_FAULT BIT(13)
#define PORT_AUTO_NEG_ASYM_PAUSE BIT(11)
#define PORT_AUTO_NEG_SYM_PAUSE BIT(10)
#define PORT_AUTO_NEG_100BT4 BIT(9)
#define PORT_AUTO_NEG_100BTX_FD BIT(8)
#define PORT_AUTO_NEG_100BTX BIT(7)
#define PORT_AUTO_NEG_10BT_FD BIT(6)
#define PORT_AUTO_NEG_10BT BIT(5)
#define PORT_AUTO_NEG_SELECTOR 0x001F
#define PORT_AUTO_NEG_802_3 0x0001
#define PORT_AUTO_NEG_PAUSE \
(PORT_AUTO_NEG_ASYM_PAUSE | PORT_AUTO_NEG_SYM_PAUSE)
#define REG_PORT_PHY_REMOTE_CAPABILITY 0x010A
#define PORT_REMOTE_NEXT_PAGE BIT(15)
#define PORT_REMOTE_ACKNOWLEDGE BIT(14)
#define PORT_REMOTE_REMOTE_FAULT BIT(13)
#define PORT_REMOTE_ASYM_PAUSE BIT(11)
#define PORT_REMOTE_SYM_PAUSE BIT(10)
#define PORT_REMOTE_100BTX_FD BIT(8)
#define PORT_REMOTE_100BTX BIT(7)
#define PORT_REMOTE_10BT_FD BIT(6)
#define PORT_REMOTE_10BT BIT(5)
#define REG_PORT_PHY_1000_CTRL 0x0112
#define PORT_AUTO_NEG_MANUAL BIT(12)
#define PORT_AUTO_NEG_MASTER BIT(11)
#define PORT_AUTO_NEG_MASTER_PREFERRED BIT(10)
#define PORT_AUTO_NEG_1000BT_FD BIT(9)
#define PORT_AUTO_NEG_1000BT BIT(8)
#define REG_PORT_PHY_1000_STATUS 0x0114
#define PORT_MASTER_FAULT BIT(15)
#define PORT_LOCAL_MASTER BIT(14)
#define PORT_LOCAL_RX_OK BIT(13)
#define PORT_REMOTE_RX_OK BIT(12)
#define PORT_REMOTE_1000BT_FD BIT(11)
#define PORT_REMOTE_1000BT BIT(10)
#define PORT_REMOTE_IDLE_CNT_M 0x0F
#define PORT_PHY_1000_STATIC_STATUS \
(PORT_LOCAL_RX_OK | \
PORT_REMOTE_RX_OK | \
PORT_REMOTE_1000BT_FD | \
PORT_REMOTE_1000BT)
#define REG_PORT_PHY_MMD_SETUP 0x011A
#define PORT_MMD_OP_MODE_M 0x3
#define PORT_MMD_OP_MODE_S 14
#define PORT_MMD_OP_INDEX 0
#define PORT_MMD_OP_DATA_NO_INCR 1
#define PORT_MMD_OP_DATA_INCR_RW 2
#define PORT_MMD_OP_DATA_INCR_W 3
#define PORT_MMD_DEVICE_ID_M 0x1F
#define MMD_SETUP(mode, dev) \
(((u16)(mode) << PORT_MMD_OP_MODE_S) | (dev))
#define REG_PORT_PHY_MMD_INDEX_DATA 0x011C
#define MMD_DEVICE_ID_DSP 1
#define MMD_DSP_SQI_CHAN_A 0xAC
#define MMD_DSP_SQI_CHAN_B 0xAD
#define MMD_DSP_SQI_CHAN_C 0xAE
#define MMD_DSP_SQI_CHAN_D 0xAF
#define DSP_SQI_ERR_DETECTED BIT(15)
#define DSP_SQI_AVG_ERR 0x7FFF
#define MMD_DEVICE_ID_COMMON 2
#define MMD_DEVICE_ID_EEE_ADV 7
#define MMD_EEE_ADV 0x3C
#define EEE_ADV_100MBIT BIT(1)
#define EEE_ADV_1GBIT BIT(2)
#define MMD_EEE_LP_ADV 0x3D
#define MMD_EEE_MSG_CODE 0x3F
#define MMD_DEVICE_ID_AFED 0x1C
#define REG_PORT_PHY_EXTENDED_STATUS 0x011E
#define PORT_100BTX_FD_ABLE BIT(15)
#define PORT_100BTX_ABLE BIT(14)
#define PORT_10BT_FD_ABLE BIT(13)
#define PORT_10BT_ABLE BIT(12)
#define REG_PORT_SGMII_ADDR__4 0x0200
#define PORT_SGMII_AUTO_INCR BIT(23)
#define PORT_SGMII_DEVICE_ID_M 0x1F
#define PORT_SGMII_DEVICE_ID_S 16
#define PORT_SGMII_ADDR_M (BIT(21) - 1)
#define REG_PORT_SGMII_DATA__4 0x0204
#define PORT_SGMII_DATA_M (BIT(16) - 1)
#define MMD_DEVICE_ID_PMA 0x01
#define MMD_DEVICE_ID_PCS 0x03
#define MMD_DEVICE_ID_PHY_XS 0x04
#define MMD_DEVICE_ID_DTE_XS 0x05
#define MMD_DEVICE_ID_AN 0x07
#define MMD_DEVICE_ID_VENDOR_CTRL 0x1E
#define MMD_DEVICE_ID_VENDOR_MII 0x1F
#define SR_MII MMD_DEVICE_ID_VENDOR_MII
#define MMD_SR_MII_CTRL 0x0000
#define SR_MII_RESET BIT(15)
#define SR_MII_LOOPBACK BIT(14)
#define SR_MII_SPEED_100MBIT BIT(13)
#define SR_MII_AUTO_NEG_ENABLE BIT(12)
#define SR_MII_POWER_DOWN BIT(11)
#define SR_MII_AUTO_NEG_RESTART BIT(9)
#define SR_MII_FULL_DUPLEX BIT(8)
#define SR_MII_SPEED_1000MBIT BIT(6)
#define MMD_SR_MII_STATUS 0x0001
#define MMD_SR_MII_ID_1 0x0002
#define MMD_SR_MII_ID_2 0x0003
#define MMD_SR_MII_AUTO_NEGOTIATION 0x0004
#define SR_MII_AUTO_NEG_NEXT_PAGE BIT(15)
#define SR_MII_AUTO_NEG_REMOTE_FAULT_M 0x3
#define SR_MII_AUTO_NEG_REMOTE_FAULT_S 12
#define SR_MII_AUTO_NEG_NO_ERROR 0
#define SR_MII_AUTO_NEG_OFFLINE 1
#define SR_MII_AUTO_NEG_LINK_FAILURE 2
#define SR_MII_AUTO_NEG_ERROR 3
#define SR_MII_AUTO_NEG_PAUSE_M 0x3
#define SR_MII_AUTO_NEG_PAUSE_S 7
#define SR_MII_AUTO_NEG_NO_PAUSE 0
#define SR_MII_AUTO_NEG_ASYM_PAUSE_TX 1
#define SR_MII_AUTO_NEG_SYM_PAUSE 2
#define SR_MII_AUTO_NEG_ASYM_PAUSE_RX 3
#define SR_MII_AUTO_NEG_HALF_DUPLEX BIT(6)
#define SR_MII_AUTO_NEG_FULL_DUPLEX BIT(5)
#define MMD_SR_MII_REMOTE_CAPABILITY 0x0005
#define MMD_SR_MII_AUTO_NEG_EXP 0x0006
#define MMD_SR_MII_AUTO_NEG_EXT 0x000F
#define MMD_SR_MII_DIGITAL_CTRL_1 0x8000
#define MMD_SR_MII_AUTO_NEG_CTRL 0x8001
#define SR_MII_8_BIT BIT(8)
#define SR_MII_SGMII_LINK_UP BIT(4)
#define SR_MII_TX_CFG_PHY_MASTER BIT(3)
#define SR_MII_PCS_MODE_M 0x3
#define SR_MII_PCS_MODE_S 1
#define SR_MII_PCS_SGMII 2
#define SR_MII_AUTO_NEG_COMPLETE_INTR BIT(0)
#define MMD_SR_MII_AUTO_NEG_STATUS 0x8002
#define SR_MII_STAT_LINK_UP BIT(4)
#define SR_MII_STAT_M 0x3
#define SR_MII_STAT_S 2
#define SR_MII_STAT_10_MBPS 0
#define SR_MII_STAT_100_MBPS 1
#define SR_MII_STAT_1000_MBPS 2
#define SR_MII_STAT_FULL_DUPLEX BIT(1)
#define MMD_SR_MII_PHY_CTRL 0x80A0
#define SR_MII_PHY_LANE_SEL_M 0xF
#define SR_MII_PHY_LANE_SEL_S 8
#define SR_MII_PHY_WRITE BIT(1)
#define SR_MII_PHY_START_BUSY BIT(0)
#define MMD_SR_MII_PHY_ADDR 0x80A1
#define SR_MII_PHY_ADDR_M (BIT(16) - 1)
#define MMD_SR_MII_PHY_DATA 0x80A2
#define SR_MII_PHY_DATA_M (BIT(16) - 1)
#define SR_MII_PHY_JTAG_CHIP_ID_HI 0x000C
#define SR_MII_PHY_JTAG_CHIP_ID_LO 0x000D
#define REG_PORT_PHY_REMOTE_LB_LED 0x0122
#define PORT_REMOTE_LOOPBACK BIT(8)
#define PORT_LED_SELECT (3 << 6)
#define PORT_LED_CTRL (3 << 4)
#define PORT_LED_CTRL_TEST BIT(3)
#define PORT_10BT_PREAMBLE BIT(2)
#define PORT_LINK_MD_10BT_ENABLE BIT(1)
#define PORT_LINK_MD_PASS BIT(0)
#define REG_PORT_PHY_LINK_MD 0x0124
#define PORT_START_CABLE_DIAG BIT(15)
#define PORT_TX_DISABLE BIT(14)
#define PORT_CABLE_DIAG_PAIR_M 0x3
#define PORT_CABLE_DIAG_PAIR_S 12
#define PORT_CABLE_DIAG_SELECT_M 0x3
#define PORT_CABLE_DIAG_SELECT_S 10
#define PORT_CABLE_DIAG_RESULT_M 0x3
#define PORT_CABLE_DIAG_RESULT_S 8
#define PORT_CABLE_STAT_NORMAL 0
#define PORT_CABLE_STAT_OPEN 1
#define PORT_CABLE_STAT_SHORT 2
#define PORT_CABLE_STAT_FAILED 3
#define PORT_CABLE_FAULT_COUNTER 0x00FF
#define REG_PORT_PHY_PMA_STATUS 0x0126
#define PORT_1000_LINK_GOOD BIT(1)
#define PORT_100_LINK_GOOD BIT(0)
#define REG_PORT_PHY_DIGITAL_STATUS 0x0128
#define PORT_LINK_DETECT BIT(14)
#define PORT_SIGNAL_DETECT BIT(13)
#define PORT_PHY_STAT_MDI BIT(12)
#define PORT_PHY_STAT_MASTER BIT(11)
#define REG_PORT_PHY_RXER_COUNTER 0x012A
#define REG_PORT_PHY_INT_ENABLE 0x0136
#define REG_PORT_PHY_INT_STATUS 0x0137
#define JABBER_INT BIT(7)
#define RX_ERR_INT BIT(6)
#define PAGE_RX_INT BIT(5)
#define PARALLEL_DETECT_FAULT_INT BIT(4)
#define LINK_PARTNER_ACK_INT BIT(3)
#define LINK_DOWN_INT BIT(2)
#define REMOTE_FAULT_INT BIT(1)
#define LINK_UP_INT BIT(0)
#define REG_PORT_PHY_DIGITAL_DEBUG_1 0x0138
#define PORT_REG_CLK_SPEED_25_MHZ BIT(14)
#define PORT_PHY_FORCE_MDI BIT(7)
#define PORT_PHY_AUTO_MDIX_DISABLE BIT(6)
/* Same as PORT_PHY_LOOPBACK */
#define PORT_PHY_PCS_LOOPBACK BIT(0)
#define REG_PORT_PHY_DIGITAL_DEBUG_2 0x013A
#define REG_PORT_PHY_DIGITAL_DEBUG_3 0x013C
#define PORT_100BT_FIXED_LATENCY BIT(15)
#define REG_PORT_PHY_PHY_CTRL 0x013E
#define PORT_INT_PIN_HIGH BIT(14)
#define PORT_ENABLE_JABBER BIT(9)
#define PORT_STAT_SPEED_1000MBIT BIT(6)
#define PORT_STAT_SPEED_100MBIT BIT(5)
#define PORT_STAT_SPEED_10MBIT BIT(4)
#define PORT_STAT_FULL_DUPLEX BIT(3)
/* Same as PORT_PHY_STAT_MASTER */
#define PORT_STAT_MASTER BIT(2)
#define PORT_RESET BIT(1)
#define PORT_LINK_STATUS_FAIL BIT(0)
/* 3 - xMII */
#define REG_PORT_XMII_CTRL_0 0x0300
#define PORT_SGMII_SEL BIT(7)
#define PORT_MII_FULL_DUPLEX BIT(6)
#define PORT_MII_100MBIT BIT(4)
#define PORT_GRXC_ENABLE BIT(0)
#define REG_PORT_XMII_CTRL_1 0x0301
#define PORT_RMII_CLK_SEL BIT(7)
/* S1 */
#define PORT_MII_1000MBIT_S1 BIT(6)
/* S2 */
#define PORT_MII_NOT_1GBIT BIT(6)
#define PORT_MII_SEL_EDGE BIT(5)
#define PORT_RGMII_ID_IG_ENABLE BIT(4)
#define PORT_RGMII_ID_EG_ENABLE BIT(3)
#define PORT_MII_MAC_MODE BIT(2)
#define PORT_MII_SEL_M 0x3
/* S1 */
#define PORT_MII_SEL_S1 0x0
#define PORT_RMII_SEL_S1 0x1
#define PORT_GMII_SEL_S1 0x2
#define PORT_RGMII_SEL_S1 0x3
/* S2 */
#define PORT_RGMII_SEL 0x0
#define PORT_RMII_SEL 0x1
#define PORT_GMII_SEL 0x2
#define PORT_MII_SEL 0x3
/* 4 - MAC */
#define REG_PORT_MAC_CTRL_0 0x0400
#define PORT_BROADCAST_STORM BIT(1)
#define PORT_JUMBO_FRAME BIT(0)
#define REG_PORT_MAC_CTRL_1 0x0401
#define PORT_BACK_PRESSURE BIT(3)
#define PORT_PASS_ALL BIT(0)
#define REG_PORT_MAC_CTRL_2 0x0402
#define PORT_100BT_EEE_DISABLE BIT(7)
#define PORT_1000BT_EEE_DISABLE BIT(6)
#define REG_PORT_MAC_IN_RATE_LIMIT 0x0403
#define PORT_IN_PORT_BASED_S 6
#define PORT_RATE_PACKET_BASED_S 5
#define PORT_IN_FLOW_CTRL_S 4
#define PORT_COUNT_IFG_S 1
#define PORT_COUNT_PREAMBLE_S 0
#define PORT_IN_PORT_BASED BIT(6)
#define PORT_IN_PACKET_BASED BIT(5)
#define PORT_IN_FLOW_CTRL BIT(4)
#define PORT_IN_LIMIT_MODE_M 0x3
#define PORT_IN_LIMIT_MODE_S 2
#define PORT_IN_ALL 0
#define PORT_IN_UNICAST 1
#define PORT_IN_MULTICAST 2
#define PORT_IN_BROADCAST 3
#define PORT_COUNT_IFG BIT(1)
#define PORT_COUNT_PREAMBLE BIT(0)
#define REG_PORT_IN_RATE_0 0x0410
#define REG_PORT_IN_RATE_1 0x0411
#define REG_PORT_IN_RATE_2 0x0412
#define REG_PORT_IN_RATE_3 0x0413
#define REG_PORT_IN_RATE_4 0x0414
#define REG_PORT_IN_RATE_5 0x0415
#define REG_PORT_IN_RATE_6 0x0416
#define REG_PORT_IN_RATE_7 0x0417
#define REG_PORT_OUT_RATE_0 0x0420
#define REG_PORT_OUT_RATE_1 0x0421
#define REG_PORT_OUT_RATE_2 0x0422
#define REG_PORT_OUT_RATE_3 0x0423
#define PORT_RATE_LIMIT_M (BIT(7) - 1)
/* 5 - MIB Counters */
#define REG_PORT_MIB_CTRL_STAT__4 0x0500
#define MIB_COUNTER_OVERFLOW BIT(31)
#define MIB_COUNTER_VALID BIT(30)
#define MIB_COUNTER_READ BIT(25)
#define MIB_COUNTER_FLUSH_FREEZE BIT(24)
#define MIB_COUNTER_INDEX_M (BIT(8) - 1)
#define MIB_COUNTER_INDEX_S 16
#define MIB_COUNTER_DATA_HI_M 0xF
#define REG_PORT_MIB_DATA 0x0504
/* 6 - ACL */
#define REG_PORT_ACL_0 0x0600
#define ACL_FIRST_RULE_M 0xF
#define REG_PORT_ACL_1 0x0601
#define ACL_MODE_M 0x3
#define ACL_MODE_S 4
#define ACL_MODE_DISABLE 0
#define ACL_MODE_LAYER_2 1
#define ACL_MODE_LAYER_3 2
#define ACL_MODE_LAYER_4 3
#define ACL_ENABLE_M 0x3
#define ACL_ENABLE_S 2
#define ACL_ENABLE_2_COUNT 0
#define ACL_ENABLE_2_TYPE 1
#define ACL_ENABLE_2_MAC 2
#define ACL_ENABLE_2_BOTH 3
#define ACL_ENABLE_3_IP 1
#define ACL_ENABLE_3_SRC_DST_COMP 2
#define ACL_ENABLE_4_PROTOCOL 0
#define ACL_ENABLE_4_TCP_PORT_COMP 1
#define ACL_ENABLE_4_UDP_PORT_COMP 2
#define ACL_ENABLE_4_TCP_SEQN_COMP 3
#define ACL_SRC BIT(1)
#define ACL_EQUAL BIT(0)
#define REG_PORT_ACL_2 0x0602
#define REG_PORT_ACL_3 0x0603
#define ACL_MAX_PORT 0xFFFF
#define REG_PORT_ACL_4 0x0604
#define REG_PORT_ACL_5 0x0605
#define ACL_MIN_PORT 0xFFFF
#define ACL_IP_ADDR 0xFFFFFFFF
#define ACL_TCP_SEQNUM 0xFFFFFFFF
#define REG_PORT_ACL_6 0x0606
#define ACL_RESERVED 0xF8
#define ACL_PORT_MODE_M 0x3
#define ACL_PORT_MODE_S 1
#define ACL_PORT_MODE_DISABLE 0
#define ACL_PORT_MODE_EITHER 1
#define ACL_PORT_MODE_IN_RANGE 2
#define ACL_PORT_MODE_OUT_OF_RANGE 3
#define REG_PORT_ACL_7 0x0607
#define ACL_TCP_FLAG_ENABLE BIT(0)
#define REG_PORT_ACL_8 0x0608
#define ACL_TCP_FLAG_M 0xFF
#define REG_PORT_ACL_9 0x0609
#define ACL_TCP_FLAG 0xFF
#define ACL_ETH_TYPE 0xFFFF
#define ACL_IP_M 0xFFFFFFFF
#define REG_PORT_ACL_A 0x060A
#define ACL_PRIO_MODE_M 0x3
#define ACL_PRIO_MODE_S 6
#define ACL_PRIO_MODE_DISABLE 0
#define ACL_PRIO_MODE_HIGHER 1
#define ACL_PRIO_MODE_LOWER 2
#define ACL_PRIO_MODE_REPLACE 3
#define ACL_PRIO_M KS_PRIO_M
#define ACL_PRIO_S 3
#define ACL_VLAN_PRIO_REPLACE BIT(2)
#define ACL_VLAN_PRIO_M KS_PRIO_M
#define ACL_VLAN_PRIO_HI_M 0x3
#define REG_PORT_ACL_B 0x060B
#define ACL_VLAN_PRIO_LO_M 0x8
#define ACL_VLAN_PRIO_S 7
#define ACL_MAP_MODE_M 0x3
#define ACL_MAP_MODE_S 5
#define ACL_MAP_MODE_DISABLE 0
#define ACL_MAP_MODE_OR 1
#define ACL_MAP_MODE_AND 2
#define ACL_MAP_MODE_REPLACE 3
#define ACL_CNT_M (BIT(11) - 1)
#define ACL_CNT_S 5
#define REG_PORT_ACL_C 0x060C
#define REG_PORT_ACL_D 0x060D
#define ACL_MSEC_UNIT BIT(6)
#define ACL_INTR_MODE BIT(5)
#define ACL_PORT_MAP 0x7F
#define REG_PORT_ACL_E 0x060E
#define REG_PORT_ACL_F 0x060F
#define REG_PORT_ACL_BYTE_EN_MSB 0x0610
#define REG_PORT_ACL_BYTE_EN_LSB 0x0611
#define ACL_ACTION_START 0xA
#define ACL_ACTION_LEN 4
#define ACL_INTR_CNT_START 0xD
#define ACL_RULESET_START 0xE
#define ACL_RULESET_LEN 2
#define ACL_TABLE_LEN 16
#define ACL_ACTION_ENABLE 0x003C
#define ACL_MATCH_ENABLE 0x7FC3
#define ACL_RULESET_ENABLE 0x8003
#define ACL_BYTE_ENABLE 0xFFFF
#define REG_PORT_ACL_CTRL_0 0x0612
#define PORT_ACL_WRITE_DONE BIT(6)
#define PORT_ACL_READ_DONE BIT(5)
#define PORT_ACL_WRITE BIT(4)
#define PORT_ACL_INDEX_M 0xF
#define REG_PORT_ACL_CTRL_1 0x0613
/* 8 - Classification and Policing */
#define REG_PORT_MRI_MIRROR_CTRL 0x0800
#define PORT_MIRROR_RX BIT(6)
#define PORT_MIRROR_TX BIT(5)
#define PORT_MIRROR_SNIFFER BIT(1)
#define REG_PORT_MRI_PRIO_CTRL 0x0801
#define PORT_HIGHEST_PRIO BIT(7)
#define PORT_OR_PRIO BIT(6)
#define PORT_MAC_PRIO_ENABLE BIT(4)
#define PORT_VLAN_PRIO_ENABLE BIT(3)
#define PORT_802_1P_PRIO_ENABLE BIT(2)
#define PORT_DIFFSERV_PRIO_ENABLE BIT(1)
#define PORT_ACL_PRIO_ENABLE BIT(0)
#define REG_PORT_MRI_MAC_CTRL 0x0802
#define PORT_USER_PRIO_CEILING BIT(7)
#define PORT_DROP_NON_VLAN BIT(4)
#define PORT_DROP_TAG BIT(3)
#define PORT_BASED_PRIO_M KS_PRIO_M
#define PORT_BASED_PRIO_S 0
#define REG_PORT_MRI_AUTHEN_CTRL 0x0803
#define PORT_ACL_ENABLE BIT(2)
#define PORT_AUTHEN_MODE 0x3
#define PORT_AUTHEN_PASS 0
#define PORT_AUTHEN_BLOCK 1
#define PORT_AUTHEN_TRAP 2
#define REG_PORT_MRI_INDEX__4 0x0804
#define MRI_INDEX_P_M 0x7
#define MRI_INDEX_P_S 16
#define MRI_INDEX_Q_M 0x3
#define MRI_INDEX_Q_S 0
#define REG_PORT_MRI_TC_MAP__4 0x0808
#define PORT_TC_MAP_M 0xf
#define PORT_TC_MAP_S 4
#define REG_PORT_MRI_POLICE_CTRL__4 0x080C
#define POLICE_DROP_ALL BIT(10)
#define POLICE_PACKET_TYPE_M 0x3
#define POLICE_PACKET_TYPE_S 8
#define POLICE_PACKET_DROPPED 0
#define POLICE_PACKET_GREEN 1
#define POLICE_PACKET_YELLOW 2
#define POLICE_PACKET_RED 3
#define PORT_BASED_POLICING BIT(7)
#define NON_DSCP_COLOR_M 0x3
#define NON_DSCP_COLOR_S 5
#define COLOR_MARK_ENABLE BIT(4)
#define COLOR_REMAP_ENABLE BIT(3)
#define POLICE_DROP_SRP BIT(2)
#define POLICE_COLOR_NOT_AWARE BIT(1)
#define POLICE_ENABLE BIT(0)
#define REG_PORT_POLICE_COLOR_0__4 0x0810
#define REG_PORT_POLICE_COLOR_1__4 0x0814
#define REG_PORT_POLICE_COLOR_2__4 0x0818
#define REG_PORT_POLICE_COLOR_3__4 0x081C
#define POLICE_COLOR_MAP_S 2
#define POLICE_COLOR_MAP_M (BIT(POLICE_COLOR_MAP_S) - 1)
#define REG_PORT_POLICE_RATE__4 0x0820
#define POLICE_CIR_S 16
#define POLICE_PIR_S 0
#define REG_PORT_POLICE_BURST_SIZE__4 0x0824
#define POLICE_BURST_SIZE_M 0x3FFF
#define POLICE_CBS_S 16
#define POLICE_PBS_S 0
#define REG_PORT_WRED_PM_CTRL_0__4 0x0830
#define WRED_PM_CTRL_M (BIT(11) - 1)
#define WRED_PM_MAX_THRESHOLD_S 16
#define WRED_PM_MIN_THRESHOLD_S 0
#define REG_PORT_WRED_PM_CTRL_1__4 0x0834
#define WRED_PM_MULTIPLIER_S 16
#define WRED_PM_AVG_QUEUE_SIZE_S 0
#define REG_PORT_WRED_QUEUE_CTRL_0__4 0x0840
#define REG_PORT_WRED_QUEUE_CTRL_1__4 0x0844
#define REG_PORT_WRED_QUEUE_PMON__4 0x0848
#define WRED_RANDOM_DROP_ENABLE BIT(31)
#define WRED_PMON_FLUSH BIT(30)
#define WRED_DROP_GYR_DISABLE BIT(29)
#define WRED_DROP_YR_DISABLE BIT(28)
#define WRED_DROP_R_DISABLE BIT(27)
#define WRED_DROP_ALL BIT(26)
#define WRED_PMON_M (BIT(24) - 1)
/* 9 - Shaping */
#define REG_PORT_MTI_QUEUE_INDEX__4 0x0900
#define REG_PORT_MTI_QUEUE_CTRL_0__4 0x0904
#define MTI_PVID_REPLACE BIT(0)
#define REG_PORT_MTI_QUEUE_CTRL_0 0x0914
#define MTI_SCHEDULE_MODE_M 0x3
#define MTI_SCHEDULE_MODE_S 6
#define MTI_SCHEDULE_STRICT_PRIO 0
#define MTI_SCHEDULE_WRR 2
#define MTI_SHAPING_M 0x3
#define MTI_SHAPING_S 4
#define MTI_SHAPING_OFF 0
#define MTI_SHAPING_SRP 1
#define MTI_SHAPING_TIME_AWARE 2
#define REG_PORT_MTI_QUEUE_CTRL_1 0x0915
#define MTI_TX_RATIO_M (BIT(7) - 1)
#define REG_PORT_MTI_QUEUE_CTRL_2__2 0x0916
#define REG_PORT_MTI_HI_WATER_MARK 0x0916
#define REG_PORT_MTI_QUEUE_CTRL_3__2 0x0918
#define REG_PORT_MTI_LO_WATER_MARK 0x0918
#define REG_PORT_MTI_QUEUE_CTRL_4__2 0x091A
#define REG_PORT_MTI_CREDIT_INCREMENT 0x091A
/* A - QM */
#define REG_PORT_QM_CTRL__4 0x0A00
#define PORT_QM_DROP_PRIO_M 0x3
#define REG_PORT_VLAN_MEMBERSHIP__4 0x0A04
#define REG_PORT_QM_QUEUE_INDEX__4 0x0A08
#define PORT_QM_QUEUE_INDEX_S 24
#define PORT_QM_BURST_SIZE_S 16
#define PORT_QM_MIN_RESV_SPACE_M (BIT(11) - 1)
#define REG_PORT_QM_WATER_MARK__4 0x0A0C
#define PORT_QM_HI_WATER_MARK_S 16
#define PORT_QM_LO_WATER_MARK_S 0
#define PORT_QM_WATER_MARK_M (BIT(11) - 1)
#define REG_PORT_QM_TX_CNT_0__4 0x0A10
#define PORT_QM_TX_CNT_USED_S 0
#define PORT_QM_TX_CNT_M (BIT(11) - 1)
#define REG_PORT_QM_TX_CNT_1__4 0x0A14
#define PORT_QM_TX_CNT_CALCULATED_S 16
#define PORT_QM_TX_CNT_AVAIL_S 0
/* B - LUE */
#define REG_PORT_LUE_CTRL 0x0B00
#define PORT_VLAN_LOOKUP_VID_0 BIT(7)
#define PORT_INGRESS_FILTER BIT(6)
#define PORT_DISCARD_NON_VID BIT(5)
#define PORT_MAC_BASED_802_1X BIT(4)
#define PORT_SRC_ADDR_FILTER BIT(3)
#define REG_PORT_LUE_MSTP_INDEX 0x0B01
#define REG_PORT_LUE_MSTP_STATE 0x0B04
#define PORT_TX_ENABLE BIT(2)
#define PORT_RX_ENABLE BIT(1)
#define PORT_LEARN_DISABLE BIT(0)
/* C - PTP */
#define REG_PTP_PORT_RX_DELAY__2 0x0C00
#define REG_PTP_PORT_TX_DELAY__2 0x0C02
#define REG_PTP_PORT_ASYM_DELAY__2 0x0C04
#define REG_PTP_PORT_XDELAY_TS 0x0C08
#define REG_PTP_PORT_XDELAY_TS_H 0x0C08
#define REG_PTP_PORT_XDELAY_TS_L 0x0C0A
#define REG_PTP_PORT_SYNC_TS 0x0C0C
#define REG_PTP_PORT_SYNC_TS_H 0x0C0C
#define REG_PTP_PORT_SYNC_TS_L 0x0C0E
#define REG_PTP_PORT_PDRESP_TS 0x0C10
#define REG_PTP_PORT_PDRESP_TS_H 0x0C10
#define REG_PTP_PORT_PDRESP_TS_L 0x0C12
#define REG_PTP_PORT_TX_INT_STATUS__2 0x0C14
#define REG_PTP_PORT_TX_INT_ENABLE__2 0x0C16
#define PTP_PORT_SYNC_INT BIT(15)
#define PTP_PORT_XDELAY_REQ_INT BIT(14)
#define PTP_PORT_PDELAY_RESP_INT BIT(13)
#define REG_PTP_PORT_LINK_DELAY__4 0x0C18
#define PRIO_QUEUES 4
#define RX_PRIO_QUEUES 8
#define KS_PRIO_IN_REG 2
#define TOTAL_PORT_NUM 7
#define KSZ9477_COUNTER_NUM 0x20
#define TOTAL_KSZ9477_COUNTER_NUM (KSZ9477_COUNTER_NUM + 2 + 2)
#define SWITCH_COUNTER_NUM KSZ9477_COUNTER_NUM
#define TOTAL_SWITCH_COUNTER_NUM TOTAL_KSZ9477_COUNTER_NUM
#define P_BCAST_STORM_CTRL REG_PORT_MAC_CTRL_0
#define P_PRIO_CTRL REG_PORT_MRI_PRIO_CTRL
#define P_MIRROR_CTRL REG_PORT_MRI_MIRROR_CTRL
#define P_STP_CTRL REG_PORT_LUE_MSTP_STATE
#define P_PHY_CTRL REG_PORT_PHY_CTRL
#define P_NEG_RESTART_CTRL REG_PORT_PHY_CTRL
#define P_LINK_STATUS REG_PORT_PHY_STATUS
#define P_SPEED_STATUS REG_PORT_PHY_PHY_CTRL
#define P_RATE_LIMIT_CTRL REG_PORT_MAC_IN_RATE_LIMIT
#define S_LINK_AGING_CTRL REG_SW_LUE_CTRL_1
#define S_MIRROR_CTRL REG_SW_MRI_CTRL_0
#define S_REPLACE_VID_CTRL REG_SW_MAC_CTRL_2
#define S_802_1P_PRIO_CTRL REG_SW_MAC_802_1P_MAP_0
#define S_TOS_PRIO_CTRL REG_SW_MAC_TOS_PRIO_0
#define S_FLUSH_TABLE_CTRL REG_SW_LUE_CTRL_1
#define SW_FLUSH_DYN_MAC_TABLE SW_FLUSH_MSTP_TABLE
#define MAX_TIMESTAMP_UNIT 2
#define MAX_TRIG_UNIT 3
#define MAX_TIMESTAMP_EVENT_UNIT 8
#define MAX_GPIO 4
#define PTP_TRIG_UNIT_M (BIT(MAX_TRIG_UNIT) - 1)
#define PTP_TS_UNIT_M (BIT(MAX_TIMESTAMP_UNIT) - 1)
/* Driver set switch broadcast storm protection at 10% rate. */
#define BROADCAST_STORM_PROT_RATE 10
/* 148,800 frames * 67 ms / 100 */
#define BROADCAST_STORM_VALUE 9969
#endif /* KSZ9477_REGS_H */
/*
* Microchip switch driver main logic
*
* Copyright (C) 2017
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_data/microchip-ksz.h>
#include <linux/phy.h>
#include <linux/etherdevice.h>
#include <linux/if_bridge.h>
#include <net/dsa.h>
#include <net/switchdev.h>
#include "ksz_priv.h"
static const struct {
int index;
char string[ETH_GSTRING_LEN];
} mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
{ 0x00, "rx_hi" },
{ 0x01, "rx_undersize" },
{ 0x02, "rx_fragments" },
{ 0x03, "rx_oversize" },
{ 0x04, "rx_jabbers" },
{ 0x05, "rx_symbol_err" },
{ 0x06, "rx_crc_err" },
{ 0x07, "rx_align_err" },
{ 0x08, "rx_mac_ctrl" },
{ 0x09, "rx_pause" },
{ 0x0A, "rx_bcast" },
{ 0x0B, "rx_mcast" },
{ 0x0C, "rx_ucast" },
{ 0x0D, "rx_64_or_less" },
{ 0x0E, "rx_65_127" },
{ 0x0F, "rx_128_255" },
{ 0x10, "rx_256_511" },
{ 0x11, "rx_512_1023" },
{ 0x12, "rx_1024_1522" },
{ 0x13, "rx_1523_2000" },
{ 0x14, "rx_2001" },
{ 0x15, "tx_hi" },
{ 0x16, "tx_late_col" },
{ 0x17, "tx_pause" },
{ 0x18, "tx_bcast" },
{ 0x19, "tx_mcast" },
{ 0x1A, "tx_ucast" },
{ 0x1B, "tx_deferred" },
{ 0x1C, "tx_total_col" },
{ 0x1D, "tx_exc_col" },
{ 0x1E, "tx_single_col" },
{ 0x1F, "tx_mult_col" },
{ 0x80, "rx_total" },
{ 0x81, "tx_total" },
{ 0x82, "rx_discards" },
{ 0x83, "tx_discards" },
};
static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
{
u8 data;
ksz_read8(dev, addr, &data);
if (set)
data |= bits;
else
data &= ~bits;
ksz_write8(dev, addr, data);
}
static void ksz_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
{
u32 data;
ksz_read32(dev, addr, &data);
if (set)
data |= bits;
else
data &= ~bits;
ksz_write32(dev, addr, data);
}
static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
bool set)
{
u32 addr;
u8 data;
addr = PORT_CTRL_ADDR(port, offset);
ksz_read8(dev, addr, &data);
if (set)
data |= bits;
else
data &= ~bits;
ksz_write8(dev, addr, data);
}
static void ksz_port_cfg32(struct ksz_device *dev, int port, int offset,
u32 bits, bool set)
{
u32 addr;
u32 data;
addr = PORT_CTRL_ADDR(port, offset);
ksz_read32(dev, addr, &data);
if (set)
data |= bits;
else
data &= ~bits;
ksz_write32(dev, addr, data);
}
static int wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton, int timeout)
{
u8 data;
do {
ksz_read8(dev, REG_SW_VLAN_CTRL, &data);
if (!(data & waiton))
break;
usleep_range(1, 10);
} while (timeout-- > 0);
if (timeout <= 0)
return -ETIMEDOUT;
return 0;
}
static int get_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table)
{
struct ksz_device *dev = ds->priv;
int ret;
mutex_lock(&dev->vlan_mutex);
ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
/* wait to be cleared */
ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
if (ret < 0) {
dev_dbg(dev->dev, "Failed to read vlan table\n");
goto exit;
}
ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
exit:
mutex_unlock(&dev->vlan_mutex);
return ret;
}
static int set_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table)
{
struct ksz_device *dev = ds->priv;
int ret;
mutex_lock(&dev->vlan_mutex);
ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
/* wait to be cleared */
ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
if (ret < 0) {
dev_dbg(dev->dev, "Failed to write vlan table\n");
goto exit;
}
ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
/* update vlan cache table */
dev->vlan_cache[vid].table[0] = vlan_table[0];
dev->vlan_cache[vid].table[1] = vlan_table[1];
dev->vlan_cache[vid].table[2] = vlan_table[2];
exit:
mutex_unlock(&dev->vlan_mutex);
return ret;
}
static void read_table(struct dsa_switch *ds, u32 *table)
{
struct ksz_device *dev = ds->priv;
ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
}
static void write_table(struct dsa_switch *ds, u32 *table)
{
struct ksz_device *dev = ds->priv;
ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
}
static int wait_alu_ready(struct ksz_device *dev, u32 waiton, int timeout)
{
u32 data;
do {
ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
if (!(data & waiton))
break;
usleep_range(1, 10);
} while (timeout-- > 0);
if (timeout <= 0)
return -ETIMEDOUT;
return 0;
}
static int wait_alu_sta_ready(struct ksz_device *dev, u32 waiton, int timeout)
{
u32 data;
do {
ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data);
if (!(data & waiton))
break;
usleep_range(1, 10);
} while (timeout-- > 0);
if (timeout <= 0)
return -ETIMEDOUT;
return 0;
}
static int ksz_reset_switch(struct dsa_switch *ds)
{
struct ksz_device *dev = ds->priv;
u8 data8;
u16 data16;
u32 data32;
/* reset switch */
ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
/* turn off SPI DO Edge select */
ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
data8 &= ~SPI_AUTO_EDGE_DETECTION;
ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
/* default configuration */
ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
/* disable interrupts */
ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
/* set broadcast storm protection 10% rate */
ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16);
data16 &= ~BROADCAST_STORM_RATE;
data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
return 0;
}
static void port_setup(struct ksz_device *dev, int port, bool cpu_port)
{
u8 data8;
u16 data16;
/* enable tag tail for host port */
if (cpu_port)
ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
true);
ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
/* set back pressure */
ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
/* set flow control */
ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, true);
/* enable broadcast storm limit */
ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
/* disable DiffServ priority */
ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
/* replace priority */
ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
false);
ksz_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
MTI_PVID_REPLACE, false);
/* enable 802.1p priority */
ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
/* configure MAC to 1G & RGMII mode */
ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
data8 |= PORT_RGMII_ID_EG_ENABLE;
data8 &= ~PORT_MII_NOT_1GBIT;
data8 &= ~PORT_MII_SEL_M;
data8 |= PORT_RGMII_SEL;
ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
/* clear pending interrupts */
ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
}
static void ksz_config_cpu_port(struct dsa_switch *ds)
{
struct ksz_device *dev = ds->priv;
int i;
ds->num_ports = dev->port_cnt;
for (i = 0; i < ds->num_ports; i++) {
if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
dev->cpu_port = i;
/* enable cpu port */
port_setup(dev, i, true);
}
}
}
static int ksz_setup(struct dsa_switch *ds)
{
struct ksz_device *dev = ds->priv;
int ret = 0;
dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
dev->num_vlans, GFP_KERNEL);
if (!dev->vlan_cache)
return -ENOMEM;
ret = ksz_reset_switch(ds);
if (ret) {
dev_err(ds->dev, "failed to reset switch\n");
return ret;
}
/* accept packet up to 2000bytes */
ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
ksz_config_cpu_port(ds);
ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
/* queue based egress rate limit */
ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
/* start switch */
ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
return 0;
}
static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds)
{
return DSA_TAG_PROTO_KSZ;
}
static int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg)
{
struct ksz_device *dev = ds->priv;
u16 val = 0;
ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
return val;
}
static int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
{
struct ksz_device *dev = ds->priv;
ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
return 0;
}
static int ksz_enable_port(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
struct ksz_device *dev = ds->priv;
/* setup slave port */
port_setup(dev, port, false);
return 0;
}
static void ksz_disable_port(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
struct ksz_device *dev = ds->priv;
/* there is no port disable */
ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, true);
}
static int ksz_sset_count(struct dsa_switch *ds)
{
return TOTAL_SWITCH_COUNTER_NUM;
}
static void ksz_get_strings(struct dsa_switch *ds, int port, uint8_t *buf)
{
int i;
for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
ETH_GSTRING_LEN);
}
}
static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
uint64_t *buf)
{
struct ksz_device *dev = ds->priv;
int i;
u32 data;
int timeout;
mutex_lock(&dev->stats_mutex);
for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
data = MIB_COUNTER_READ;
data |= ((mib_names[i].index & 0xFF) << MIB_COUNTER_INDEX_S);
ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
timeout = 1000;
do {
ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
&data);
usleep_range(1, 10);
if (!(data & MIB_COUNTER_READ))
break;
} while (timeout-- > 0);
/* failed to read MIB. get out of loop */
if (!timeout) {
dev_dbg(dev->dev, "Failed to get MIB\n");
break;
}
/* count resets upon read */
ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
dev->mib_value[i] += (uint64_t)data;
buf[i] = dev->mib_value[i];
}
mutex_unlock(&dev->stats_mutex);
}
static void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
{
struct ksz_device *dev = ds->priv;
u8 data;
ksz_pread8(dev, port, P_STP_CTRL, &data);
data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
switch (state) {
case BR_STATE_DISABLED:
data |= PORT_LEARN_DISABLE;
break;
case BR_STATE_LISTENING:
data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
break;
case BR_STATE_LEARNING:
data |= PORT_RX_ENABLE;
break;
case BR_STATE_FORWARDING:
data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
break;
case BR_STATE_BLOCKING:
data |= PORT_LEARN_DISABLE;
break;
default:
dev_err(ds->dev, "invalid STP state: %d\n", state);
return;
}
ksz_pwrite8(dev, port, P_STP_CTRL, data);
}
static void ksz_port_fast_age(struct dsa_switch *ds, int port)
{
struct ksz_device *dev = ds->priv;
u8 data8;
ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
data8 |= SW_FAST_AGING;
ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
data8 &= ~SW_FAST_AGING;
ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
}
static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port, bool flag)
{
struct ksz_device *dev = ds->priv;
if (flag) {
ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
PORT_VLAN_LOOKUP_VID_0, true);
ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, true);
ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
} else {
ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, false);
ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
PORT_VLAN_LOOKUP_VID_0, false);
}
return 0;
}
static int ksz_port_vlan_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans)
{
/* nothing needed */
return 0;
}
static void ksz_port_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans)
{
struct ksz_device *dev = ds->priv;
u32 vlan_table[3];
u16 vid;
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
if (get_vlan_table(ds, vid, vlan_table)) {
dev_dbg(dev->dev, "Failed to get vlan table\n");
return;
}
vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M);
if (untagged)
vlan_table[1] |= BIT(port);
else
vlan_table[1] &= ~BIT(port);
vlan_table[1] &= ~(BIT(dev->cpu_port));
vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
if (set_vlan_table(ds, vid, vlan_table)) {
dev_dbg(dev->dev, "Failed to set vlan table\n");
return;
}
/* change PVID */
if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid);
}
}
static int ksz_port_vlan_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
struct ksz_device *dev = ds->priv;
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
u32 vlan_table[3];
u16 vid;
u16 pvid;
ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
pvid = pvid & 0xFFF;
for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
if (get_vlan_table(ds, vid, vlan_table)) {
dev_dbg(dev->dev, "Failed to get vlan table\n");
return -ETIMEDOUT;
}
vlan_table[2] &= ~BIT(port);
if (pvid == vid)
pvid = 1;
if (untagged)
vlan_table[1] &= ~BIT(port);
if (set_vlan_table(ds, vid, vlan_table)) {
dev_dbg(dev->dev, "Failed to set vlan table\n");
return -ETIMEDOUT;
}
}
ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
return 0;
}
static int ksz_port_vlan_dump(struct dsa_switch *ds, int port,
struct switchdev_obj_port_vlan *vlan,
switchdev_obj_dump_cb_t *cb)
{
struct ksz_device *dev = ds->priv;
u16 vid;
u16 data;
struct vlan_table *vlan_cache;
int err = 0;
mutex_lock(&dev->vlan_mutex);
/* use dev->vlan_cache due to lack of searching valid vlan entry */
for (vid = vlan->vid_begin; vid < dev->num_vlans; vid++) {
vlan_cache = &dev->vlan_cache[vid];
if (!(vlan_cache->table[0] & VLAN_VALID))
continue;
vlan->vid_begin = vid;
vlan->vid_end = vid;
vlan->flags = 0;
if (vlan_cache->table[2] & BIT(port)) {
if (vlan_cache->table[1] & BIT(port))
vlan->flags |= BRIDGE_VLAN_INFO_UNTAGGED;
ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &data);
if (vid == (data & 0xFFFFF))
vlan->flags |= BRIDGE_VLAN_INFO_PVID;
err = cb(&vlan->obj);
if (err)
break;
}
}
mutex_unlock(&dev->vlan_mutex);
return err;
}
static int ksz_port_fdb_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb,
struct switchdev_trans *trans)
{
/* nothing needed */
return 0;
}
struct alu_struct {
/* entry 1 */
u8 is_static:1;
u8 is_src_filter:1;
u8 is_dst_filter:1;
u8 prio_age:3;
u32 _reserv_0_1:23;
u8 mstp:3;
/* entry 2 */
u8 is_override:1;
u8 is_use_fid:1;
u32 _reserv_1_1:23;
u8 port_forward:7;
/* entry 3 & 4*/
u32 _reserv_2_1:9;
u8 fid:7;
u8 mac[ETH_ALEN];
};
static void ksz_port_fdb_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb,
struct switchdev_trans *trans)
{
struct ksz_device *dev = ds->priv;
u32 alu_table[4];
u32 data;
mutex_lock(&dev->alu_mutex);
/* find any entry with mac & vid */
data = fdb->vid << ALU_FID_INDEX_S;
data |= ((fdb->addr[0] << 8) | fdb->addr[1]);
ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
data = ((fdb->addr[2] << 24) | (fdb->addr[3] << 16));
data |= ((fdb->addr[4] << 8) | fdb->addr[5]);
ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
/* start read operation */
ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
/* wait to be finished */
if (wait_alu_ready(dev, ALU_START, 1000) < 0) {
dev_dbg(dev->dev, "Failed to read ALU\n");
goto exit;
}
/* read ALU entry */
read_table(ds, alu_table);
/* update ALU entry */
alu_table[0] = ALU_V_STATIC_VALID;
alu_table[1] |= BIT(port);
if (fdb->vid)
alu_table[1] |= ALU_V_USE_FID;
alu_table[2] = (fdb->vid << ALU_V_FID_S);
alu_table[2] |= ((fdb->addr[0] << 8) | fdb->addr[1]);
alu_table[3] = ((fdb->addr[2] << 24) | (fdb->addr[3] << 16));
alu_table[3] |= ((fdb->addr[4] << 8) | fdb->addr[5]);
write_table(ds, alu_table);
ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
/* wait to be finished */
if (wait_alu_ready(dev, ALU_START, 1000) < 0)
dev_dbg(dev->dev, "Failed to read ALU\n");
exit:
mutex_unlock(&dev->alu_mutex);
}
static int ksz_port_fdb_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb)
{
struct ksz_device *dev = ds->priv;
u32 alu_table[4];
u32 data;
int ret = 0;
mutex_lock(&dev->alu_mutex);
/* read any entry with mac & vid */
data = fdb->vid << ALU_FID_INDEX_S;
data |= ((fdb->addr[0] << 8) | fdb->addr[1]);
ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
data = ((fdb->addr[2] << 24) | (fdb->addr[3] << 16));
data |= ((fdb->addr[4] << 8) | fdb->addr[5]);
ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
/* start read operation */
ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
/* wait to be finished */
ret = wait_alu_ready(dev, ALU_START, 1000);
if (ret < 0) {
dev_dbg(dev->dev, "Failed to read ALU\n");
goto exit;
}
ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
if (alu_table[0] & ALU_V_STATIC_VALID) {
ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
/* clear forwarding port */
alu_table[2] &= ~BIT(port);
/* if there is no port to forward, clear table */
if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
alu_table[0] = 0;
alu_table[1] = 0;
alu_table[2] = 0;
alu_table[3] = 0;
}
} else {
alu_table[0] = 0;
alu_table[1] = 0;
alu_table[2] = 0;
alu_table[3] = 0;
}
write_table(ds, alu_table);
ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
/* wait to be finished */
ret = wait_alu_ready(dev, ALU_START, 1000);
if (ret < 0)
dev_dbg(dev->dev, "Failed to write ALU\n");
exit:
mutex_unlock(&dev->alu_mutex);
return ret;
}
static void convert_alu(struct alu_struct *alu, u32 *alu_table)
{
alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
ALU_V_PRIO_AGE_CNT_M;
alu->mstp = alu_table[0] & ALU_V_MSTP_M;
alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
alu->mac[1] = alu_table[2] & 0xFF;
alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
alu->mac[5] = alu_table[3] & 0xFF;
}
static int ksz_port_fdb_dump(struct dsa_switch *ds, int port,
struct switchdev_obj_port_fdb *fdb,
switchdev_obj_dump_cb_t *cb)
{
struct ksz_device *dev = ds->priv;
int ret = 0;
u32 data;
u32 alu_table[4];
struct alu_struct alu;
int timeout;
mutex_lock(&dev->alu_mutex);
/* start ALU search */
ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
do {
timeout = 1000;
do {
ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
if ((data & ALU_VALID) || !(data & ALU_START))
break;
usleep_range(1, 10);
} while (timeout-- > 0);
if (!timeout) {
dev_dbg(dev->dev, "Failed to search ALU\n");
ret = -ETIMEDOUT;
goto exit;
}
/* read ALU table */
read_table(ds, alu_table);
convert_alu(&alu, alu_table);
if (alu.port_forward & BIT(port)) {
fdb->vid = alu.fid;
if (alu.is_static)
fdb->ndm_state = NUD_NOARP;
else
fdb->ndm_state = NUD_REACHABLE;
ether_addr_copy(fdb->addr, alu.mac);
ret = cb(&fdb->obj);
if (ret)
goto exit;
}
} while (data & ALU_START);
exit:
/* stop ALU search */
ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
mutex_unlock(&dev->alu_mutex);
return ret;
}
static int ksz_port_mdb_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_mdb *mdb,
struct switchdev_trans *trans)
{
/* nothing to do */
return 0;
}
static void ksz_port_mdb_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_mdb *mdb,
struct switchdev_trans *trans)
{
struct ksz_device *dev = ds->priv;
u32 static_table[4];
u32 data;
int index;
u32 mac_hi, mac_lo;
mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
mutex_lock(&dev->alu_mutex);
for (index = 0; index < dev->num_statics; index++) {
/* find empty slot first */
data = (index << ALU_STAT_INDEX_S) |
ALU_STAT_READ | ALU_STAT_START;
ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
/* wait to be finished */
if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) {
dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
goto exit;
}
/* read ALU static table */
read_table(ds, static_table);
if (static_table[0] & ALU_V_STATIC_VALID) {
/* check this has same vid & mac address */
if (((static_table[2] >> ALU_V_FID_S) == (mdb->vid)) &&
((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
(static_table[3] == mac_lo)) {
/* found matching one */
break;
}
} else {
/* found empty one */
break;
}
}
/* no available entry */
if (index == dev->num_statics)
goto exit;
/* add entry */
static_table[0] = ALU_V_STATIC_VALID;
static_table[1] |= BIT(port);
if (mdb->vid)
static_table[1] |= ALU_V_USE_FID;
static_table[2] = (mdb->vid << ALU_V_FID_S);
static_table[2] |= mac_hi;
static_table[3] = mac_lo;
write_table(ds, static_table);
data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
/* wait to be finished */
if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0)
dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
exit:
mutex_unlock(&dev->alu_mutex);
}
static int ksz_port_mdb_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_mdb *mdb)
{
struct ksz_device *dev = ds->priv;
u32 static_table[4];
u32 data;
int index;
int ret = 0;
u32 mac_hi, mac_lo;
mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
mutex_lock(&dev->alu_mutex);
for (index = 0; index < dev->num_statics; index++) {
/* find empty slot first */
data = (index << ALU_STAT_INDEX_S) |
ALU_STAT_READ | ALU_STAT_START;
ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
/* wait to be finished */
ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
if (ret < 0) {
dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
goto exit;
}
/* read ALU static table */
read_table(ds, static_table);
if (static_table[0] & ALU_V_STATIC_VALID) {
/* check this has same vid & mac address */
if (((static_table[2] >> ALU_V_FID_S) == (mdb->vid)) &&
((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
(static_table[3] == mac_lo)) {
/* found matching one */
break;
}
}
}
/* no available entry */
if (index == dev->num_statics) {
ret = -EINVAL;
goto exit;
}
/* clear port */
static_table[1] &= ~BIT(port);
if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
/* delete entry */
static_table[0] = 0;
static_table[1] = 0;
static_table[2] = 0;
static_table[3] = 0;
}
write_table(ds, static_table);
data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
/* wait to be finished */
ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
if (ret < 0)
dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
exit:
mutex_unlock(&dev->alu_mutex);
return ret;
}
static int ksz_port_mdb_dump(struct dsa_switch *ds, int port,
struct switchdev_obj_port_mdb *mdb,
switchdev_obj_dump_cb_t *cb)
{
/* this is not called by switch layer */
return 0;
}
static int ksz_port_mirror_add(struct dsa_switch *ds, int port,
struct dsa_mall_mirror_tc_entry *mirror,
bool ingress)
{
struct ksz_device *dev = ds->priv;
if (ingress)
ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
else
ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
/* configure mirror port */
ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
PORT_MIRROR_SNIFFER, true);
ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
return 0;
}
static void ksz_port_mirror_del(struct dsa_switch *ds, int port,
struct dsa_mall_mirror_tc_entry *mirror)
{
struct ksz_device *dev = ds->priv;
u8 data;
if (mirror->ingress)
ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
else
ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
PORT_MIRROR_SNIFFER, false);
}
static const struct dsa_switch_ops ksz_switch_ops = {
.get_tag_protocol = ksz_get_tag_protocol,
.setup = ksz_setup,
.phy_read = ksz_phy_read16,
.phy_write = ksz_phy_write16,
.port_enable = ksz_enable_port,
.port_disable = ksz_disable_port,
.get_strings = ksz_get_strings,
.get_ethtool_stats = ksz_get_ethtool_stats,
.get_sset_count = ksz_sset_count,
.port_stp_state_set = ksz_port_stp_state_set,
.port_fast_age = ksz_port_fast_age,
.port_vlan_filtering = ksz_port_vlan_filtering,
.port_vlan_prepare = ksz_port_vlan_prepare,
.port_vlan_add = ksz_port_vlan_add,
.port_vlan_del = ksz_port_vlan_del,
.port_vlan_dump = ksz_port_vlan_dump,
.port_fdb_prepare = ksz_port_fdb_prepare,
.port_fdb_dump = ksz_port_fdb_dump,
.port_fdb_add = ksz_port_fdb_add,
.port_fdb_del = ksz_port_fdb_del,
.port_mdb_prepare = ksz_port_mdb_prepare,
.port_mdb_add = ksz_port_mdb_add,
.port_mdb_del = ksz_port_mdb_del,
.port_mdb_dump = ksz_port_mdb_dump,
.port_mirror_add = ksz_port_mirror_add,
.port_mirror_del = ksz_port_mirror_del,
};
struct ksz_chip_data {
u32 chip_id;
const char *dev_name;
int num_vlans;
int num_alus;
int num_statics;
int cpu_ports;
int port_cnt;
};
static const struct ksz_chip_data ksz_switch_chips[] = {
{
.chip_id = 0x00947700,
.dev_name = "KSZ9477",
.num_vlans = 4096,
.num_alus = 4096,
.num_statics = 16,
.cpu_ports = 0x7F, /* can be configured as cpu port */
.port_cnt = 7, /* total physical port count */
},
};
static int ksz_switch_init(struct ksz_device *dev)
{
int i;
mutex_init(&dev->reg_mutex);
mutex_init(&dev->stats_mutex);
mutex_init(&dev->alu_mutex);
mutex_init(&dev->vlan_mutex);
dev->ds->ops = &ksz_switch_ops;
for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) {
const struct ksz_chip_data *chip = &ksz_switch_chips[i];
if (dev->chip_id == chip->chip_id) {
dev->name = chip->dev_name;
dev->num_vlans = chip->num_vlans;
dev->num_alus = chip->num_alus;
dev->num_statics = chip->num_statics;
dev->port_cnt = chip->port_cnt;
dev->cpu_ports = chip->cpu_ports;
break;
}
}
/* no switch found */
if (!dev->port_cnt)
return -ENODEV;
return 0;
}
struct ksz_device *ksz_switch_alloc(struct device *base,
const struct ksz_io_ops *ops,
void *priv)
{
struct dsa_switch *ds;
struct ksz_device *swdev;
ds = dsa_switch_alloc(base, DSA_MAX_PORTS);
if (!ds)
return NULL;
swdev = devm_kzalloc(base, sizeof(*swdev), GFP_KERNEL);
if (!swdev)
return NULL;
ds->priv = swdev;
swdev->dev = base;
swdev->ds = ds;
swdev->priv = priv;
swdev->ops = ops;
return swdev;
}
EXPORT_SYMBOL(ksz_switch_alloc);
int ksz_switch_detect(struct ksz_device *dev)
{
u8 data8;
u32 id32;
int ret;
/* turn off SPI DO Edge select */
ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
if (ret)
return ret;
data8 &= ~SPI_AUTO_EDGE_DETECTION;
ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
if (ret)
return ret;
/* read chip id */
ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
if (ret)
return ret;
dev->chip_id = id32;
return 0;
}
EXPORT_SYMBOL(ksz_switch_detect);
int ksz_switch_register(struct ksz_device *dev)
{
int ret;
if (dev->pdata)
dev->chip_id = dev->pdata->chip_id;
if (ksz_switch_detect(dev))
return -EINVAL;
ret = ksz_switch_init(dev);
if (ret)
return ret;
return dsa_register_switch(dev->ds);
}
EXPORT_SYMBOL(ksz_switch_register);
void ksz_switch_remove(struct ksz_device *dev)
{
dsa_unregister_switch(dev->ds);
}
EXPORT_SYMBOL(ksz_switch_remove);
MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver");
MODULE_LICENSE("GPL");
/*
* Microchip KSZ series switch common definitions
*
* Copyright (C) 2017
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef __KSZ_PRIV_H
#define __KSZ_PRIV_H
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/phy.h>
#include <linux/etherdevice.h>
#include <net/dsa.h>
#include "ksz_9477_reg.h"
struct ksz_io_ops;
struct vlan_table {
u32 table[3];
};
struct ksz_device {
struct dsa_switch *ds;
struct ksz_platform_data *pdata;
const char *name;
struct mutex reg_mutex; /* register access */
struct mutex stats_mutex; /* status access */
struct mutex alu_mutex; /* ALU access */
struct mutex vlan_mutex; /* vlan access */
const struct ksz_io_ops *ops;
struct device *dev;
void *priv;
/* chip specific data */
u32 chip_id;
int num_vlans;
int num_alus;
int num_statics;
int cpu_port; /* port connected to CPU */
int cpu_ports; /* port bitmap can be cpu port */
int port_cnt;
struct vlan_table *vlan_cache;
u64 mib_value[TOTAL_SWITCH_COUNTER_NUM];
};
struct ksz_io_ops {
int (*read8)(struct ksz_device *dev, u32 reg, u8 *value);
int (*read16)(struct ksz_device *dev, u32 reg, u16 *value);
int (*read24)(struct ksz_device *dev, u32 reg, u32 *value);
int (*read32)(struct ksz_device *dev, u32 reg, u32 *value);
int (*write8)(struct ksz_device *dev, u32 reg, u8 value);
int (*write16)(struct ksz_device *dev, u32 reg, u16 value);
int (*write24)(struct ksz_device *dev, u32 reg, u32 value);
int (*write32)(struct ksz_device *dev, u32 reg, u32 value);
int (*phy_read16)(struct ksz_device *dev, int addr, int reg,
u16 *value);
int (*phy_write16)(struct ksz_device *dev, int addr, int reg,
u16 value);
};
struct ksz_device *ksz_switch_alloc(struct device *base,
const struct ksz_io_ops *ops, void *priv);
int ksz_switch_detect(struct ksz_device *dev);
int ksz_switch_register(struct ksz_device *dev);
void ksz_switch_remove(struct ksz_device *dev);
static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read8(dev, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int ksz_read16(struct ksz_device *dev, u32 reg, u16 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read16(dev, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int ksz_read24(struct ksz_device *dev, u32 reg, u32 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read24(dev, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int ksz_read32(struct ksz_device *dev, u32 reg, u32 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read32(dev, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int ksz_write8(struct ksz_device *dev, u32 reg, u8 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write8(dev, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int ksz_write16(struct ksz_device *dev, u32 reg, u16 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write16(dev, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int ksz_write24(struct ksz_device *dev, u32 reg, u32 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write24(dev, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int ksz_write32(struct ksz_device *dev, u32 reg, u32 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write32(dev, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline void ksz_pread8(struct ksz_device *dev, int port, int offset,
u8 *data)
{
ksz_read8(dev, PORT_CTRL_ADDR(port, offset), data);
}
static inline void ksz_pread16(struct ksz_device *dev, int port, int offset,
u16 *data)
{
ksz_read16(dev, PORT_CTRL_ADDR(port, offset), data);
}
static inline void ksz_pread32(struct ksz_device *dev, int port, int offset,
u32 *data)
{
ksz_read32(dev, PORT_CTRL_ADDR(port, offset), data);
}
static inline void ksz_pwrite8(struct ksz_device *dev, int port, int offset,
u8 data)
{
ksz_write8(dev, PORT_CTRL_ADDR(port, offset), data);
}
static inline void ksz_pwrite16(struct ksz_device *dev, int port, int offset,
u16 data)
{
ksz_write16(dev, PORT_CTRL_ADDR(port, offset), data);
}
static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset,
u32 data)
{
ksz_write32(dev, PORT_CTRL_ADDR(port, offset), data);
}
#endif
/*
* Microchip KSZ series register access through SPI
*
* Copyright (C) 2017
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <asm/unaligned.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include "ksz_priv.h"
/* SPI frame opcodes */
#define KS_SPIOP_RD 3
#define KS_SPIOP_WR 2
#define SPI_ADDR_SHIFT 24
#define SPI_ADDR_MASK (BIT(SPI_ADDR_SHIFT) - 1)
#define SPI_TURNAROUND_SHIFT 5
static int ksz_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
unsigned int len)
{
u32 txbuf;
int ret;
txbuf = reg & SPI_ADDR_MASK;
txbuf |= KS_SPIOP_RD << SPI_ADDR_SHIFT;
txbuf <<= SPI_TURNAROUND_SHIFT;
txbuf = cpu_to_be32(txbuf);
ret = spi_write_then_read(spi, &txbuf, 4, val, len);
return ret;
}
static int ksz_spi_read(struct ksz_device *dev, u32 reg, u8 *data,
unsigned int len)
{
struct spi_device *spi = dev->priv;
return ksz_spi_read_reg(spi, reg, data, len);
}
static int ksz_spi_read8(struct ksz_device *dev, u32 reg, u8 *val)
{
return ksz_spi_read(dev, reg, val, 1);
}
static int ksz_spi_read16(struct ksz_device *dev, u32 reg, u16 *val)
{
int ret = ksz_spi_read(dev, reg, (u8 *)val, 2);
if (!ret)
*val = be16_to_cpu(*val);
return ret;
}
static int ksz_spi_read24(struct ksz_device *dev, u32 reg, u32 *val)
{
int ret;
*val = 0;
ret = ksz_spi_read(dev, reg, (u8 *)val, 3);
if (!ret) {
*val = be32_to_cpu(*val);
/* convert to 24bit */
*val >>= 8;
}
return ret;
}
static int ksz_spi_read32(struct ksz_device *dev, u32 reg, u32 *val)
{
int ret = ksz_spi_read(dev, reg, (u8 *)val, 4);
if (!ret)
*val = be32_to_cpu(*val);
return ret;
}
static int ksz_spi_write_reg(struct spi_device *spi, u32 reg, u8 *val,
unsigned int len)
{
u32 txbuf;
u8 data[12];
int i;
txbuf = reg & SPI_ADDR_MASK;
txbuf |= (KS_SPIOP_WR << SPI_ADDR_SHIFT);
txbuf <<= SPI_TURNAROUND_SHIFT;
txbuf = cpu_to_be32(txbuf);
data[0] = txbuf & 0xFF;
data[1] = (txbuf & 0xFF00) >> 8;
data[2] = (txbuf & 0xFF0000) >> 16;
data[3] = (txbuf & 0xFF000000) >> 24;
for (i = 0; i < len; i++)
data[i + 4] = val[i];
return spi_write(spi, &data, 4 + len);
}
static int ksz_spi_write8(struct ksz_device *dev, u32 reg, u8 value)
{
struct spi_device *spi = dev->priv;
return ksz_spi_write_reg(spi, reg, &value, 1);
}
static int ksz_spi_write16(struct ksz_device *dev, u32 reg, u16 value)
{
struct spi_device *spi = dev->priv;
value = cpu_to_be16(value);
return ksz_spi_write_reg(spi, reg, (u8 *)&value, 2);
}
static int ksz_spi_write24(struct ksz_device *dev, u32 reg, u32 value)
{
struct spi_device *spi = dev->priv;
/* make it to big endian 24bit from MSB */
value <<= 8;
value = cpu_to_be32(value);
return ksz_spi_write_reg(spi, reg, (u8 *)&value, 3);
}
static int ksz_spi_write32(struct ksz_device *dev, u32 reg, u32 value)
{
struct spi_device *spi = dev->priv;
value = cpu_to_be32(value);
return ksz_spi_write_reg(spi, reg, (u8 *)&value, 4);
}
static const struct ksz_io_ops ksz_spi_ops = {
.read8 = ksz_spi_read8,
.read16 = ksz_spi_read16,
.read24 = ksz_spi_read24,
.read32 = ksz_spi_read32,
.write8 = ksz_spi_write8,
.write16 = ksz_spi_write16,
.write24 = ksz_spi_write24,
.write32 = ksz_spi_write32,
};
static int ksz_spi_probe(struct spi_device *spi)
{
struct ksz_device *dev;
int ret;
dev = ksz_switch_alloc(&spi->dev, &ksz_spi_ops, spi);
if (!dev)
return -ENOMEM;
if (spi->dev.platform_data)
dev->pdata = spi->dev.platform_data;
ret = ksz_switch_register(dev);
if (ret)
return ret;
spi_set_drvdata(spi, dev);
return 0;
}
static int ksz_spi_remove(struct spi_device *spi)
{
struct ksz_device *dev = spi_get_drvdata(spi);
if (dev)
ksz_switch_remove(dev);
return 0;
}
static const struct of_device_id ksz_dt_ids[] = {
{ .compatible = "microchip,ksz9477" },
{},
};
MODULE_DEVICE_TABLE(of, ksz_dt_ids);
static struct spi_driver ksz_spi_driver = {
.driver = {
.name = "ksz9477-switch",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(ksz_dt_ids),
},
.probe = ksz_spi_probe,
.remove = ksz_spi_remove,
};
module_spi_driver(ksz_spi_driver);
MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
MODULE_DESCRIPTION("Microchip KSZ Series Switch SPI access Driver");
MODULE_LICENSE("GPL");
......@@ -20,6 +20,7 @@
* ksz8081, ksz8091,
* ksz8061,
* Switch : ksz8873, ksz886x
* ksz9477
*/
#include <linux/kernel.h>
......@@ -996,6 +997,16 @@ static struct phy_driver ksphy_driver[] = {
.read_status = ksz8873mll_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = PHY_ID_KSZ9477,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Microchip KSZ9477",
.features = PHY_GBIT_FEATURES,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
} };
module_phy_driver(ksphy_driver);
......
......@@ -37,6 +37,8 @@
#define PHY_ID_KSZ8795 0x00221550
#define PHY_ID_KSZ9477 0x00221631
/* struct phy_device dev_flags definitions */
#define MICREL_PHY_50MHZ_CLK 0x00000001
#define MICREL_PHY_FXEN 0x00000002
......
/*
* Microchip KSZ series switch platform data
*
* Copyright (C) 2017
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef __MICROCHIP_KSZ_H
#define __MICROCHIP_KSZ_H
#include <linux/kernel.h>
struct ksz_platform_data {
u32 chip_id;
u16 enabled_ports;
};
#endif
......@@ -31,6 +31,7 @@ enum dsa_tag_protocol {
DSA_TAG_PROTO_BRCM,
DSA_TAG_PROTO_DSA,
DSA_TAG_PROTO_EDSA,
DSA_TAG_PROTO_KSZ,
DSA_TAG_PROTO_LAN9303,
DSA_TAG_PROTO_MTK,
DSA_TAG_PROTO_QCA,
......
......@@ -25,6 +25,9 @@ config NET_DSA_TAG_DSA
config NET_DSA_TAG_EDSA
bool
config NET_DSA_TAG_KSZ
bool
config NET_DSA_TAG_LAN9303
bool
......
......@@ -6,6 +6,7 @@ dsa_core-y += dsa.o dsa2.o legacy.o port.o slave.o switch.o
dsa_core-$(CONFIG_NET_DSA_TAG_BRCM) += tag_brcm.o
dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
dsa_core-$(CONFIG_NET_DSA_TAG_KSZ) += tag_ksz.o
dsa_core-$(CONFIG_NET_DSA_TAG_LAN9303) += tag_lan9303.o
dsa_core-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o
dsa_core-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
......
......@@ -49,6 +49,9 @@ const struct dsa_device_ops *dsa_device_ops[DSA_TAG_LAST] = {
#ifdef CONFIG_NET_DSA_TAG_EDSA
[DSA_TAG_PROTO_EDSA] = &edsa_netdev_ops,
#endif
#ifdef CONFIG_NET_DSA_TAG_KSZ
[DSA_TAG_PROTO_KSZ] = &ksz_netdev_ops,
#endif
#ifdef CONFIG_NET_DSA_TAG_LAN9303
[DSA_TAG_PROTO_LAN9303] = &lan9303_netdev_ops,
#endif
......
......@@ -167,6 +167,9 @@ extern const struct dsa_device_ops dsa_netdev_ops;
/* tag_edsa.c */
extern const struct dsa_device_ops edsa_netdev_ops;
/* tag_ksz.c */
extern const struct dsa_device_ops ksz_netdev_ops;
/* tag_lan9303.c */
extern const struct dsa_device_ops lan9303_netdev_ops;
......
/*
* net/dsa/tag_ksz.c - Microchip KSZ Switch tag format handling
* Copyright (c) 2017 Microchip Technology
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/etherdevice.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <net/dsa.h>
#include "dsa_priv.h"
/* For Ingress (Host -> KSZ), 2 bytes are added before FCS.
* ---------------------------------------------------------------------------
* DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|tag1(1byte)|FCS(4bytes)
* ---------------------------------------------------------------------------
* tag0 : Prioritization (not used now)
* tag1 : each bit represents port (eg, 0x01=port1, 0x02=port2, 0x10=port5)
*
* For Egress (KSZ -> Host), 1 byte is added before FCS.
* ---------------------------------------------------------------------------
* DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|FCS(4bytes)
* ---------------------------------------------------------------------------
* tag0 : zero-based value represents port
* (eg, 0x00=port1, 0x02=port3, 0x06=port7)
*/
#define KSZ_INGRESS_TAG_LEN 2
#define KSZ_EGRESS_TAG_LEN 1
static struct sk_buff *ksz_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
struct sk_buff *nskb;
int padlen;
u8 *tag;
padlen = (skb->len >= ETH_ZLEN) ? 0 : ETH_ZLEN - skb->len;
if (skb_tailroom(skb) >= padlen + KSZ_INGRESS_TAG_LEN) {
nskb = skb;
} else {
nskb = alloc_skb(NET_IP_ALIGN + skb->len +
padlen + KSZ_INGRESS_TAG_LEN, GFP_ATOMIC);
if (!nskb) {
kfree_skb(skb);
return NULL;
}
skb_reserve(nskb, NET_IP_ALIGN);
skb_reset_mac_header(nskb);
skb_set_network_header(nskb,
skb_network_header(skb) - skb->head);
skb_set_transport_header(nskb,
skb_transport_header(skb) - skb->head);
skb_copy_and_csum_dev(skb, skb_put(nskb, skb->len));
kfree_skb(skb);
}
/* skb is freed when it fails */
if (skb_put_padto(nskb, nskb->len + padlen))
return NULL;
tag = skb_put(nskb, KSZ_INGRESS_TAG_LEN);
tag[0] = 0;
tag[1] = 1 << p->dp->index; /* destination port */
return nskb;
}
struct sk_buff *ksz_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
struct dsa_switch_tree *dst = dev->dsa_ptr;
struct dsa_switch *ds;
u8 *tag;
int source_port;
ds = dst->cpu_dp->ds;
tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN;
source_port = tag[0] & 7;
if (source_port >= ds->num_ports || !ds->ports[source_port].netdev)
return NULL;
pskb_trim_rcsum(skb, skb->len - KSZ_EGRESS_TAG_LEN);
skb->dev = ds->ports[source_port].netdev;
return skb;
}
const struct dsa_device_ops ksz_netdev_ops = {
.xmit = ksz_xmit,
.rcv = ksz_rcv,
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment