Merge branch 'pm-cpufreq'

Merge cpufreq updates for 5.17-rc1:

 - Add new P-state driver for AMD processors (Huang Rui).

 - Fix initialization of min and max frequency QoS requests in the
   cpufreq core (Rafael Wysocki).

 - Fix EPP handling on Alder Lake in intel_pstate (Srinivas Pandruvada).

 - Make intel_pstate update cpuinfo.max_freq when notified of HWP
   capabilities changes and drop a redundant function call from that
   driver (Rafael Wysocki).

 - Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
   Stephen Boyd, Vladimir Zapolskiy).

 - Fix double devm_remap() in the Mediatek cpufreq driver (Hector Yuan).

 - Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
   Luba).

 - Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).

* pm-cpufreq: (32 commits)
  x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
  cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
  cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
  MAINTAINERS: Add AMD P-State driver maintainer entry
  Documentation: amd-pstate: Add AMD P-State driver introduction
  cpufreq: amd-pstate: Add AMD P-State performance attributes
  cpufreq: amd-pstate: Add AMD P-State frequencies attributes
  cpufreq: amd-pstate: Add boost mode support for AMD P-State
  cpufreq: amd-pstate: Add trace for AMD P-State module
  cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
  cpufreq: amd-pstate: Add fast switch function for AMD P-State
  cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
  ACPI: CPPC: Add CPPC enable register function
  ACPI: CPPC: Check present CPUs for determining _CPC is valid
  ACPI: CPPC: Implement support for SystemIO registers
  x86/msr: Add AMD CPPC MSR definitions
  x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
  cpufreq: use default_groups in kobj_type
  cpufreq: mediatek-hw: Fix double devm_remap in hotplug case
  cpufreq: intel_pstate: Update cpuinfo.max_freq on HWP_CAP changes
  ...

Documentation/admin-guide/acpi/cppc_sysfs.rst

@@ -4,6 +4,8 @@
 Collaborative Processor Performance Control (CPPC)
 ==================================================
 
+.. _cppc_sysfs:
+
 CPPC
 ====
 

Documentation/admin-guide/pm/amd-pstate.rst

+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+===============================================
+``amd-pstate`` CPU Performance Scaling Driver
+===============================================
+
+:Copyright: |copy| 2021 Advanced Micro Devices, Inc.
+
+:Author: Huang Rui <ray.huang@amd.com>
+
+
+Introduction
+===================
+
+``amd-pstate`` is the AMD CPU performance scaling driver that introduces a
+new CPU frequency control mechanism on modern AMD APU and CPU series in
+Linux kernel. The new mechanism is based on Collaborative Processor
+Performance Control (CPPC) which provides finer grain frequency management
+than legacy ACPI hardware P-States. Current AMD CPU/APU platforms are using
+the ACPI P-states driver to manage CPU frequency and clocks with switching
+only in 3 P-states. CPPC replaces the ACPI P-states controls, allows a
+flexible, low-latency interface for the Linux kernel to directly
+communicate the performance hints to hardware.
+
+``amd-pstate`` leverages the Linux kernel governors such as ``schedutil``,
+``ondemand``, etc. to manage the performance hints which are provided by
+CPPC hardware functionality that internally follows the hardware
+specification (for details refer to AMD64 Architecture Programmer's Manual
+Volume 2: System Programming [1]_). Currently ``amd-pstate`` supports basic
+frequency control function according to kernel governors on some of the
+Zen2 and Zen3 processors, and we will implement more AMD specific functions
+in future after we verify them on the hardware and SBIOS.
+
+
+AMD CPPC Overview
+=======================
+
+Collaborative Processor Performance Control (CPPC) interface enumerates a
+continuous, abstract, and unit-less performance value in a scale that is
+not tied to a specific performance state / frequency. This is an ACPI
+standard [2]_ which software can specify application performance goals and
+hints as a relative target to the infrastructure limits. AMD processors
+provides the low latency register model (MSR) instead of AML code
+interpreter for performance adjustments. ``amd-pstate`` will initialize a
+``struct cpufreq_driver`` instance ``amd_pstate_driver`` with the callbacks
+to manage each performance update behavior. ::
+
+ Highest Perf ------>+-----------------------+                         +-----------------------+
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |          Max Perf  ---->|                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+ Nominal Perf ------>+-----------------------+                         +-----------------------+
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |      Desired Perf  ---->|                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+  Lowest non-        |                       |                         |                       |
+  linear perf ------>+-----------------------+                         +-----------------------+
+                     |                       |                         |                       |
+                     |                       |       Lowest perf  ---->|                       |
+                     |                       |                         |                       |
+  Lowest perf ------>+-----------------------+                         +-----------------------+
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+          0   ------>+-----------------------+                         +-----------------------+
+
+                                     AMD P-States Performance Scale
+
+
+.. _perf_cap:
+
+AMD CPPC Performance Capability
+--------------------------------
+
+Highest Performance (RO)
+.........................
+
+It is the absolute maximum performance an individual processor may reach,
+assuming ideal conditions. This performance level may not be sustainable
+for long durations and may only be achievable if other platform components
+are in a specific state; for example, it may require other processors be in
+an idle state. This would be equivalent to the highest frequencies
+supported by the processor.
+
+Nominal (Guaranteed) Performance (RO)
+......................................
+
+It is the maximum sustained performance level of the processor, assuming
+ideal operating conditions. In absence of an external constraint (power,
+thermal, etc.) this is the performance level the processor is expected to
+be able to maintain continuously. All cores/processors are expected to be
+able to sustain their nominal performance state simultaneously.
+
+Lowest non-linear Performance (RO)
+...................................
+
+It is the lowest performance level at which nonlinear power savings are
+achieved, for example, due to the combined effects of voltage and frequency
+scaling. Above this threshold, lower performance levels should be generally
+more energy efficient than higher performance levels. This register
+effectively conveys the most efficient performance level to ``amd-pstate``.
+
+Lowest Performance (RO)
+........................
+
+It is the absolute lowest performance level of the processor. Selecting a
+performance level lower than the lowest nonlinear performance level may
+cause an efficiency penalty but should reduce the instantaneous power
+consumption of the processor.
+
+AMD CPPC Performance Control
+------------------------------
+
+``amd-pstate`` passes performance goals through these registers. The
+register drives the behavior of the desired performance target.
+
+Minimum requested performance (RW)
+...................................
+
+``amd-pstate`` specifies the minimum allowed performance level.
+
+Maximum requested performance (RW)
+...................................
+
+``amd-pstate`` specifies a limit the maximum performance that is expected
+to be supplied by the hardware.
+
+Desired performance target (RW)
+...................................
+
+``amd-pstate`` specifies a desired target in the CPPC performance scale as
+a relative number. This can be expressed as percentage of nominal
+performance (infrastructure max). Below the nominal sustained performance
+level, desired performance expresses the average performance level of the
+processor subject to hardware. Above the nominal performance level,
+processor must provide at least nominal performance requested and go higher
+if current operating conditions allow.
+
+Energy Performance Preference (EPP) (RW)
+.........................................
+
+Provides a hint to the hardware if software wants to bias toward performance
+(0x0) or energy efficiency (0xff).
+
+
+Key Governors Support
+=======================
+
+``amd-pstate`` can be used with all the (generic) scaling governors listed
+by the ``scaling_available_governors`` policy attribute in ``sysfs``. Then,
+it is responsible for the configuration of policy objects corresponding to
+CPUs and provides the ``CPUFreq`` core (and the scaling governors attached
+to the policy objects) with accurate information on the maximum and minimum
+operating frequencies supported by the hardware. Users can check the
+``scaling_cur_freq`` information comes from the ``CPUFreq`` core.
+
+``amd-pstate`` mainly supports ``schedutil`` and ``ondemand`` for dynamic
+frequency control. It is to fine tune the processor configuration on
+``amd-pstate`` to the ``schedutil`` with CPU CFS scheduler. ``amd-pstate``
+registers adjust_perf callback to implement the CPPC similar performance
+update behavior. It is initialized by ``sugov_start`` and then populate the
+CPU's update_util_data pointer to assign ``sugov_update_single_perf`` as
+the utilization update callback function in CPU scheduler. CPU scheduler
+will call ``cpufreq_update_util`` and assign the target performance
+according to the ``struct sugov_cpu`` that utilization update belongs to.
+Then ``amd-pstate`` updates the desired performance according to the CPU
+scheduler assigned.
+
+
+Processor Support
+=======================
+
+The ``amd-pstate`` initialization will fail if the _CPC in ACPI SBIOS is
+not existed at the detected processor, and it uses ``acpi_cpc_valid`` to
+check the _CPC existence. All Zen based processors support legacy ACPI
+hardware P-States function, so while the ``amd-pstate`` fails to be
+initialized, the kernel will fall back to initialize ``acpi-cpufreq``
+driver.
+
+There are two types of hardware implementations for ``amd-pstate``: one is
+`Full MSR Support <perf_cap_>`_ and another is `Shared Memory Support
+<perf_cap_>`_. It can use :c:macro:`X86_FEATURE_CPPC` feature flag (for
+details refer to Processor Programming Reference (PPR) for AMD Family
+19h Model 51h, Revision A1 Processors [3]_) to indicate the different
+types. ``amd-pstate`` is to register different ``static_call`` instances
+for different hardware implementations.
+
+Currently, some of Zen2 and Zen3 processors support ``amd-pstate``. In the
+future, it will be supported on more and more AMD processors.
+
+Full MSR Support
+-----------------
+
+Some new Zen3 processors such as Cezanne provide the MSR registers directly
+while the :c:macro:`X86_FEATURE_CPPC` CPU feature flag is set.
+``amd-pstate`` can handle the MSR register to implement the fast switch
+function in ``CPUFreq`` that can shrink latency of frequency control on the
+interrupt context. The functions with ``pstate_xxx`` prefix represent the
+operations of MSR registers.
+
+Shared Memory Support
+----------------------
+
+If :c:macro:`X86_FEATURE_CPPC` CPU feature flag is not set, that means the
+processor supports shared memory solution. In this case, ``amd-pstate``
+uses the ``cppc_acpi`` helper methods to implement the callback functions
+that defined on ``static_call``. The functions with ``cppc_xxx`` prefix
+represent the operations of acpi cppc helpers for shared memory solution.
+
+
+AMD P-States and ACPI hardware P-States always can be supported in one
+processor. But AMD P-States has the higher priority and if it is enabled
+with :c:macro:`MSR_AMD_CPPC_ENABLE` or ``cppc_set_enable``, it will respond
+to the request from AMD P-States.
+
+
+User Space Interface in ``sysfs``
+==================================
+
+``amd-pstate`` exposes several global attributes (files) in ``sysfs`` to
+control its functionality at the system level. They located in the
+``/sys/devices/system/cpu/cpufreq/policyX/`` directory and affect all CPUs. ::
+
+ root@hr-test1:/home/ray# ls /sys/devices/system/cpu/cpufreq/policy0/*amd*
+ /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_highest_perf
+ /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_lowest_nonlinear_freq
+ /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_max_freq
+
+
+``amd_pstate_highest_perf / amd_pstate_max_freq``
+
+Maximum CPPC performance and CPU frequency that the driver is allowed to
+set in percent of the maximum supported CPPC performance level (the highest
+performance supported in `AMD CPPC Performance Capability <perf_cap_>`_).
+In some of ASICs, the highest CPPC performance is not the one in the _CPC
+table, so we need to expose it to sysfs. If boost is not active but
+supported, this maximum frequency will be larger than the one in
+``cpuinfo``.
+This attribute is read-only.
+
+``amd_pstate_lowest_nonlinear_freq``
+
+The lowest non-linear CPPC CPU frequency that the driver is allowed to set
+in percent of the maximum supported CPPC performance level (Please see the
+lowest non-linear performance in `AMD CPPC Performance Capability
+<perf_cap_>`_).
+This attribute is read-only.
+
+For other performance and frequency values, we can read them back from
+``/sys/devices/system/cpu/cpuX/acpi_cppc/``, see :ref:`cppc_sysfs`.
+
+
+``amd-pstate`` vs ``acpi-cpufreq``
+======================================
+
+On majority of AMD platforms supported by ``acpi-cpufreq``, the ACPI tables
+provided by the platform firmware used for CPU performance scaling, but
+only provides 3 P-states on AMD processors.
+However, on modern AMD APU and CPU series, it provides the collaborative
+processor performance control according to ACPI protocol and customize this
+for AMD platforms. That is fine-grain and continuous frequency range
+instead of the legacy hardware P-states. ``amd-pstate`` is the kernel
+module which supports the new AMD P-States mechanism on most of future AMD
+platforms. The AMD P-States mechanism will be the more performance and energy
+efficiency frequency management method on AMD processors.
+
+Kernel Module Options for ``amd-pstate``
+=========================================
+
+``shared_mem``
+Use a module param (shared_mem) to enable related processors manually with
+**amd_pstate.shared_mem=1**.
+Due to the performance issue on the processors with `Shared Memory Support
+<perf_cap_>`_, so we disable it for the moment and will enable this by default
+once we address performance issue on this solution.
+
+The way to check whether current processor is `Full MSR Support <perf_cap_>`_
+or `Shared Memory Support <perf_cap_>`_ : ::
+
+  ray@hr-test1:~$ lscpu | grep cppc
+  Flags:                           fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr rdpru wbnoinvd cppc arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl umip pku ospke vaes vpclmulqdq rdpid overflow_recov succor smca fsrm
+
+If CPU Flags have cppc, then this processor supports `Full MSR Support
+<perf_cap_>`_. Otherwise it supports `Shared Memory Support <perf_cap_>`_.
+
+
+``cpupower`` tool support for ``amd-pstate``
+===============================================
+
+``amd-pstate`` is supported on ``cpupower`` tool that can be used to dump the frequency
+information. And it is in progress to support more and more operations for new
+``amd-pstate`` module with this tool. ::
+
+ root@hr-test1:/home/ray# cpupower frequency-info
+ analyzing CPU 0:
+   driver: amd-pstate
+   CPUs which run at the same hardware frequency: 0
+   CPUs which need to have their frequency coordinated by software: 0
+   maximum transition latency: 131 us
+   hardware limits: 400 MHz - 4.68 GHz
+   available cpufreq governors: ondemand conservative powersave userspace performance schedutil
+   current policy: frequency should be within 400 MHz and 4.68 GHz.
+                   The governor "schedutil" may decide which speed to use
+                   within this range.
+   current CPU frequency: Unable to call hardware
+   current CPU frequency: 4.02 GHz (asserted by call to kernel)
+   boost state support:
+     Supported: yes
+     Active: yes
+     AMD PSTATE Highest Performance: 166. Maximum Frequency: 4.68 GHz.
+     AMD PSTATE Nominal Performance: 117. Nominal Frequency: 3.30 GHz.
+     AMD PSTATE Lowest Non-linear Performance: 39. Lowest Non-linear Frequency: 1.10 GHz.
+     AMD PSTATE Lowest Performance: 15. Lowest Frequency: 400 MHz.
+
+
+Diagnostics and Tuning
+=======================
+
+Trace Events
+--------------
+
+There are two static trace events that can be used for ``amd-pstate``
+diagnostics.  One of them is the cpu_frequency trace event generally used
+by ``CPUFreq``, and the other one is the ``amd_pstate_perf`` trace event
+specific to ``amd-pstate``.  The following sequence of shell commands can
+be used to enable them and see their output (if the kernel is generally
+configured to support event tracing). ::
+
+ root@hr-test1:/home/ray# cd /sys/kernel/tracing/
+ root@hr-test1:/sys/kernel/tracing# echo 1 > events/amd_cpu/enable
+ root@hr-test1:/sys/kernel/tracing# cat trace
+ # tracer: nop
+ #
+ # entries-in-buffer/entries-written: 47827/42233061   #P:2
+ #
+ #                                _-----=> irqs-off
+ #                               / _----=> need-resched
+ #                              | / _---=> hardirq/softirq
+ #                              || / _--=> preempt-depth
+ #                              ||| /     delay
+ #           TASK-PID     CPU#  ||||   TIMESTAMP  FUNCTION
+ #              | |         |   ||||      |         |
+          <idle>-0       [015] dN...  4995.979886: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=15 changed=false fast_switch=true
+          <idle>-0       [007] d.h..  4995.979893: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=7 changed=false fast_switch=true
+             cat-2161    [000] d....  4995.980841: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=0 changed=false fast_switch=true
+            sshd-2125    [004] d.s..  4995.980968: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=4 changed=false fast_switch=true
+          <idle>-0       [007] d.s..  4995.980968: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=7 changed=false fast_switch=true
+          <idle>-0       [003] d.s..  4995.980971: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=3 changed=false fast_switch=true
+          <idle>-0       [011] d.s..  4995.980996: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=11 changed=false fast_switch=true
+
+The cpu_frequency trace event will be triggered either by the ``schedutil`` scaling
+governor (for the policies it is attached to), or by the ``CPUFreq`` core (for the
+policies with other scaling governors).
+
+
+Reference
+===========
+
+.. [1] AMD64 Architecture Programmer's Manual Volume 2: System Programming,
+       https://www.amd.com/system/files/TechDocs/24593.pdf
+
+.. [2] Advanced Configuration and Power Interface Specification,
+       https://uefi.org/sites/default/files/resources/ACPI_Spec_6_4_Jan22.pdf
+
+.. [3] Processor Programming Reference (PPR) for AMD Family 19h Model 51h, Revision A1 Processors
+       https://www.amd.com/system/files/TechDocs/56569-A1-PUB.zip

Documentation/admin-guide/pm/working-state.rst

@@ -11,6 +11,7 @@ Working-State Power Management
    intel_idle
    cpufreq
    intel_pstate
+   amd-pstate
    cpufreq_drivers
    intel_epb
    intel-speed-select

MAINTAINERS

@@ -993,6 +993,13 @@ S:	Supported
 T:	git https://gitlab.freedesktop.org/agd5f/linux.git
 F:	drivers/gpu/drm/amd/pm/
 
+AMD PSTATE DRIVER
+M:	Huang Rui <ray.huang@amd.com>
+L:	linux-pm@vger.kernel.org
+S:	Supported
+F:	Documentation/admin-guide/pm/amd-pstate.rst
+F:	drivers/cpufreq/amd-pstate*
+
 AMD PTDMA DRIVER
 M:	Sanjay R Mehta <sanju.mehta@amd.com>
 L:	dmaengine@vger.kernel.org

arch/arm/include/asm/topology.h

@@ -23,7 +23,7 @@
 
 /* Replace task scheduler's default thermal pressure API */
 #define arch_scale_thermal_pressure topology_get_thermal_pressure
-#define arch_set_thermal_pressure   topology_set_thermal_pressure
+#define arch_update_thermal_pressure	topology_update_thermal_pressure
 
 #else
 

arch/arm64/include/asm/topology.h

@@ -32,7 +32,7 @@ void update_freq_counters_refs(void);
 
 /* Replace task scheduler's default thermal pressure API */
 #define arch_scale_thermal_pressure topology_get_thermal_pressure
-#define arch_set_thermal_pressure   topology_set_thermal_pressure
+#define arch_update_thermal_pressure	topology_update_thermal_pressure
 
 #include <asm-generic/topology.h>
 

arch/x86/include/asm/cpufeatures.h

@@ -315,6 +315,7 @@
 #define X86_FEATURE_AMD_SSBD		(13*32+24) /* "" Speculative Store Bypass Disable */
 #define X86_FEATURE_VIRT_SSBD		(13*32+25) /* Virtualized Speculative Store Bypass Disable */
 #define X86_FEATURE_AMD_SSB_NO		(13*32+26) /* "" Speculative Store Bypass is fixed in hardware. */
+#define X86_FEATURE_CPPC		(13*32+27) /* Collaborative Processor Performance Control */
 
 /* Thermal and Power Management Leaf, CPUID level 0x00000006 (EAX), word 14 */
 #define X86_FEATURE_DTHERM		(14*32+ 0) /* Digital Thermal Sensor */

arch/x86/include/asm/msr-index.h

@@ -486,6 +486,23 @@
 
 #define MSR_AMD64_VIRT_SPEC_CTRL	0xc001011f
 
+/* AMD Collaborative Processor Performance Control MSRs */
+#define MSR_AMD_CPPC_CAP1		0xc00102b0
+#define MSR_AMD_CPPC_ENABLE		0xc00102b1
+#define MSR_AMD_CPPC_CAP2		0xc00102b2
+#define MSR_AMD_CPPC_REQ		0xc00102b3
+#define MSR_AMD_CPPC_STATUS		0xc00102b4
+
+#define AMD_CPPC_LOWEST_PERF(x)		(((x) >> 0) & 0xff)
+#define AMD_CPPC_LOWNONLIN_PERF(x)	(((x) >> 8) & 0xff)
+#define AMD_CPPC_NOMINAL_PERF(x)	(((x) >> 16) & 0xff)
+#define AMD_CPPC_HIGHEST_PERF(x)	(((x) >> 24) & 0xff)
+
+#define AMD_CPPC_MAX_PERF(x)		(((x) & 0xff) << 0)
+#define AMD_CPPC_MIN_PERF(x)		(((x) & 0xff) << 8)
+#define AMD_CPPC_DES_PERF(x)		(((x) & 0xff) << 16)
+#define AMD_CPPC_ENERGY_PERF_PREF(x)	(((x) & 0xff) << 24)
+
 /* Fam 17h MSRs */
 #define MSR_F17H_IRPERF			0xc00000e9
 

arch/x86/include/asm/topology.h

@@ -221,7 +221,7 @@ static inline void arch_set_max_freq_ratio(bool turbo_disabled)
 }
 #endif
 
-#ifdef CONFIG_ACPI_CPPC_LIB
+#if defined(CONFIG_ACPI_CPPC_LIB) && defined(CONFIG_SMP)
 void init_freq_invariance_cppc(void);
 #define init_freq_invariance_cppc init_freq_invariance_cppc
 #endif

drivers/acpi/cppc_acpi.c

@@ -118,6 +118,8 @@ static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
  */
 #define NUM_RETRIES 500ULL
 
+#define OVER_16BTS_MASK ~0xFFFFULL
+
 #define define_one_cppc_ro(_name)		\
 static struct kobj_attribute _name =		\
 __ATTR(_name, 0444, show_##_name, NULL)
@@ -411,7 +413,7 @@ bool acpi_cpc_valid(void)
 	struct cpc_desc *cpc_ptr;
 	int cpu;
 
-	for_each_possible_cpu(cpu) {
+	for_each_present_cpu(cpu) {
 		cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
 		if (!cpc_ptr)
 			return false;
@@ -746,9 +748,26 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr)
 						goto out_free;
 					cpc_ptr->cpc_regs[i-2].sys_mem_vaddr = addr;
 				}
+			} else if (gas_t->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
+				if (gas_t->access_width < 1 || gas_t->access_width > 3) {
+					/*
+					 * 1 = 8-bit, 2 = 16-bit, and 3 = 32-bit.
+					 * SystemIO doesn't implement 64-bit
+					 * registers.
+					 */
+					pr_debug("Invalid access width %d for SystemIO register\n",
+						gas_t->access_width);
+					goto out_free;
+				}
+				if (gas_t->address & OVER_16BTS_MASK) {
+					/* SystemIO registers use 16-bit integer addresses */
+					pr_debug("Invalid IO port %llu for SystemIO register\n",
+						gas_t->address);
+					goto out_free;
+				}
 			} else {
 				if (gas_t->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE || !cpc_ffh_supported()) {
-					/* Support only PCC ,SYS MEM and FFH type regs */
+					/* Support only PCC, SystemMemory, SystemIO, and FFH type regs. */
 					pr_debug("Unsupported register type: %d\n", gas_t->space_id);
 					goto out_free;
 				}
@@ -923,7 +942,21 @@ static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
 	}
 
 	*val = 0;
-	if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
+
+	if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
+		u32 width = 8 << (reg->access_width - 1);
+		acpi_status status;
+
+		status = acpi_os_read_port((acpi_io_address)reg->address,
+					   (u32 *)val, width);
+		if (ACPI_FAILURE(status)) {
+			pr_debug("Error: Failed to read SystemIO port %llx\n",
+				 reg->address);
+			return -EFAULT;
+		}
+
+		return 0;
+	} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
 		vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
 	else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
 		vaddr = reg_res->sys_mem_vaddr;
@@ -962,7 +995,20 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
 	int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
 	struct cpc_reg *reg = &reg_res->cpc_entry.reg;
 
-	if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
+	if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
+		u32 width = 8 << (reg->access_width - 1);
+		acpi_status status;
+
+		status = acpi_os_write_port((acpi_io_address)reg->address,
+					    (u32)val, width);
+		if (ACPI_FAILURE(status)) {
+			pr_debug("Error: Failed to write SystemIO port %llx\n",
+				 reg->address);
+			return -EFAULT;
+		}
+
+		return 0;
+	} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
 		vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
 	else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
 		vaddr = reg_res->sys_mem_vaddr;
@@ -1229,6 +1275,51 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
 }
 EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs);
 
+/**
+ * cppc_set_enable - Set to enable CPPC on the processor by writing the
+ * Continuous Performance Control package EnableRegister field.
+ * @cpu: CPU for which to enable CPPC register.
+ * @enable: 0 - disable, 1 - enable CPPC feature on the processor.
+ *
+ * Return: 0 for success, -ERRNO or -EIO otherwise.
+ */
+int cppc_set_enable(int cpu, bool enable)
+{
+	int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
+	struct cpc_register_resource *enable_reg;
+	struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
+	struct cppc_pcc_data *pcc_ss_data = NULL;
+	int ret = -EINVAL;
+
+	if (!cpc_desc) {
+		pr_debug("No CPC descriptor for CPU:%d\n", cpu);
+		return -EINVAL;
+	}
+
+	enable_reg = &cpc_desc->cpc_regs[ENABLE];
+
+	if (CPC_IN_PCC(enable_reg)) {
+
+		if (pcc_ss_id < 0)
+			return -EIO;
+
+		ret = cpc_write(cpu, enable_reg, enable);
+		if (ret)
+			return ret;
+
+		pcc_ss_data = pcc_data[pcc_ss_id];
+
+		down_write(&pcc_ss_data->pcc_lock);
+		/* after writing CPC, transfer the ownership of PCC to platfrom */
+		ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
+		up_write(&pcc_ss_data->pcc_lock);
+		return ret;
+	}
+
+	return cpc_write(cpu, enable_reg, enable);
+}
+EXPORT_SYMBOL_GPL(cppc_set_enable);
+
 /**
  * cppc_set_perf - Set a CPU's performance controls.
  * @cpu: CPU for which to set performance controls.

drivers/base/arch_topology.c

@@ -22,6 +22,7 @@
 static DEFINE_PER_CPU(struct scale_freq_data __rcu *, sft_data);
 static struct cpumask scale_freq_counters_mask;
 static bool scale_freq_invariant;
+static DEFINE_PER_CPU(u32, freq_factor) = 1;
 
 static bool supports_scale_freq_counters(const struct cpumask *cpus)
 {
@@ -155,15 +156,49 @@ void topology_set_cpu_scale(unsigned int cpu, unsigned long capacity)
 
 DEFINE_PER_CPU(unsigned long, thermal_pressure);
 
-void topology_set_thermal_pressure(const struct cpumask *cpus,
-			       unsigned long th_pressure)
+/**
+ * topology_update_thermal_pressure() - Update thermal pressure for CPUs
+ * @cpus        : The related CPUs for which capacity has been reduced
+ * @capped_freq : The maximum allowed frequency that CPUs can run at
+ *
+ * Update the value of thermal pressure for all @cpus in the mask. The
+ * cpumask should include all (online+offline) affected CPUs, to avoid
+ * operating on stale data when hot-plug is used for some CPUs. The
+ * @capped_freq reflects the currently allowed max CPUs frequency due to
+ * thermal capping. It might be also a boost frequency value, which is bigger
+ * than the internal 'freq_factor' max frequency. In such case the pressure
+ * value should simply be removed, since this is an indication that there is
+ * no thermal throttling. The @capped_freq must be provided in kHz.
+ */
+void topology_update_thermal_pressure(const struct cpumask *cpus,
+				      unsigned long capped_freq)
 {
+	unsigned long max_capacity, capacity, th_pressure;
+	u32 max_freq;
 	int cpu;
 
+	cpu = cpumask_first(cpus);
+	max_capacity = arch_scale_cpu_capacity(cpu);
+	max_freq = per_cpu(freq_factor, cpu);
+
+	/* Convert to MHz scale which is used in 'freq_factor' */
+	capped_freq /= 1000;
+
+	/*
+	 * Handle properly the boost frequencies, which should simply clean
+	 * the thermal pressure value.
+	 */
+	if (max_freq <= capped_freq)
+		capacity = max_capacity;
+	else
+		capacity = mult_frac(max_capacity, capped_freq, max_freq);
+
+	th_pressure = max_capacity - capacity;
+
 	for_each_cpu(cpu, cpus)
 		WRITE_ONCE(per_cpu(thermal_pressure, cpu), th_pressure);
 }
-EXPORT_SYMBOL_GPL(topology_set_thermal_pressure);
+EXPORT_SYMBOL_GPL(topology_update_thermal_pressure);
 
 static ssize_t cpu_capacity_show(struct device *dev,
 				 struct device_attribute *attr,
@@ -217,7 +252,6 @@ static void update_topology_flags_workfn(struct work_struct *work)
 	update_topology = 0;
 }
 
-static DEFINE_PER_CPU(u32, freq_factor) = 1;
 static u32 *raw_capacity;
 
 static int free_raw_capacity(void)

drivers/cpufreq/Kconfig.x86

@@ -34,6 +34,23 @@ config X86_PCC_CPUFREQ
 
 	  If in doubt, say N.
 
+config X86_AMD_PSTATE
+	tristate "AMD Processor P-State driver"
+	depends on X86 && ACPI
+	select ACPI_PROCESSOR
+	select ACPI_CPPC_LIB if X86_64
+	select CPU_FREQ_GOV_SCHEDUTIL if SMP
+	help
+	  This driver adds a CPUFreq driver which utilizes a fine grain
+	  processor performance frequency control range instead of legacy
+	  performance levels. _CPC needs to be present in the ACPI tables
+	  of the system.
+
+	  For details, take a look at:
+	  <file:Documentation/admin-guide/pm/amd-pstate.rst>.
+
+	  If in doubt, say N.
+
 config X86_ACPI_CPUFREQ
 	tristate "ACPI Processor P-States driver"
 	depends on ACPI_PROCESSOR

drivers/cpufreq/Makefile

@@ -17,6 +17,10 @@ obj-$(CONFIG_CPU_FREQ_GOV_ATTR_SET)	+= cpufreq_governor_attr_set.o
 obj-$(CONFIG_CPUFREQ_DT)		+= cpufreq-dt.o
 obj-$(CONFIG_CPUFREQ_DT_PLATDEV)	+= cpufreq-dt-platdev.o
 
+# Traces
+CFLAGS_amd-pstate-trace.o               := -I$(src)
+amd_pstate-y				:= amd-pstate.o amd-pstate-trace.o
+
 ##################################################################################
 # x86 drivers.
 # Link order matters. K8 is preferred to ACPI because of firmware bugs in early
@@ -25,6 +29,7 @@ obj-$(CONFIG_CPUFREQ_DT_PLATDEV)	+= cpufreq-dt-platdev.o
 # speedstep-* is preferred over p4-clockmod.
 
 obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o
+obj-$(CONFIG_X86_AMD_PSTATE)		+= amd_pstate.o
 obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
 obj-$(CONFIG_X86_PCC_CPUFREQ)		+= pcc-cpufreq.o
 obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o

drivers/cpufreq/amd-pstate-trace.c

+#define CREATE_TRACE_POINTS
+#include "amd-pstate-trace.h"

drivers/cpufreq/amd-pstate-trace.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * amd-pstate-trace.h - AMD Processor P-state Frequency Driver Tracer
+ *
+ * Copyright (C) 2021 Advanced Micro Devices, Inc. All Rights Reserved.
+ *
+ * Author: Huang Rui <ray.huang@amd.com>
+ */
+
+#if !defined(_AMD_PSTATE_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _AMD_PSTATE_TRACE_H
+
+#include <linux/cpufreq.h>
+#include <linux/tracepoint.h>
+#include <linux/trace_events.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM amd_cpu
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE amd-pstate-trace
+
+#define TPS(x)  tracepoint_string(x)
+
+TRACE_EVENT(amd_pstate_perf,
+
+	TP_PROTO(unsigned long min_perf,
+		 unsigned long target_perf,
+		 unsigned long capacity,
+		 unsigned int cpu_id,
+		 bool changed,
+		 bool fast_switch
+		 ),
+
+	TP_ARGS(min_perf,
+		target_perf,
+		capacity,
+		cpu_id,
+		changed,
+		fast_switch
+		),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, min_perf)
+		__field(unsigned long, target_perf)
+		__field(unsigned long, capacity)
+		__field(unsigned int, cpu_id)
+		__field(bool, changed)
+		__field(bool, fast_switch)
+		),
+
+	TP_fast_assign(
+		__entry->min_perf = min_perf;
+		__entry->target_perf = target_perf;
+		__entry->capacity = capacity;
+		__entry->cpu_id = cpu_id;
+		__entry->changed = changed;
+		__entry->fast_switch = fast_switch;
+		),
+
+	TP_printk("amd_min_perf=%lu amd_des_perf=%lu amd_max_perf=%lu cpu_id=%u changed=%s fast_switch=%s",
+		  (unsigned long)__entry->min_perf,
+		  (unsigned long)__entry->target_perf,
+		  (unsigned long)__entry->capacity,
+		  (unsigned int)__entry->cpu_id,
+		  (__entry->changed) ? "true" : "false",
+		  (__entry->fast_switch) ? "true" : "false"
+		 )
+);
+
+#endif /* _AMD_PSTATE_TRACE_H */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#include <trace/define_trace.h>

drivers/cpufreq/amd-pstate.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * amd-pstate.c - AMD Processor P-state Frequency Driver
+ *
+ * Copyright (C) 2021 Advanced Micro Devices, Inc. All Rights Reserved.
+ *
+ * Author: Huang Rui <ray.huang@amd.com>
+ *
+ * AMD P-State introduces a new CPU performance scaling design for AMD
+ * processors using the ACPI Collaborative Performance and Power Control (CPPC)
+ * feature which works with the AMD SMU firmware providing a finer grained
+ * frequency control range. It is to replace the legacy ACPI P-States control,
+ * allows a flexible, low-latency interface for the Linux kernel to directly
+ * communicate the performance hints to hardware.
+ *
+ * AMD P-State is supported on recent AMD Zen base CPU series include some of
+ * Zen2 and Zen3 processors. _CPC needs to be present in the ACPI tables of AMD
+ * P-State supported system. And there are two types of hardware implementations
+ * for AMD P-State: 1) Full MSR Solution and 2) Shared Memory Solution.
+ * X86_FEATURE_CPPC CPU feature flag is used to distinguish the different types.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/compiler.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/static_call.h>
+
+#include <acpi/processor.h>
+#include <acpi/cppc_acpi.h>
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+#include <asm/cpu_device_id.h>
+#include "amd-pstate-trace.h"
+
+#define AMD_PSTATE_TRANSITION_LATENCY	0x20000
+#define AMD_PSTATE_TRANSITION_DELAY	500
+
+/*
+ * TODO: We need more time to fine tune processors with shared memory solution
+ * with community together.
+ *
+ * There are some performance drops on the CPU benchmarks which reports from
+ * Suse. We are co-working with them to fine tune the shared memory solution. So
+ * we disable it by default to go acpi-cpufreq on these processors and add a
+ * module parameter to be able to enable it manually for debugging.
+ */
+static bool shared_mem = false;
+module_param(shared_mem, bool, 0444);
+MODULE_PARM_DESC(shared_mem,
+		 "enable amd-pstate on processors with shared memory solution (false = disabled (default), true = enabled)");
+
+static struct cpufreq_driver amd_pstate_driver;
+
+/**
+ * struct amd_cpudata - private CPU data for AMD P-State
+ * @cpu: CPU number
+ * @req: constraint request to apply
+ * @cppc_req_cached: cached performance request hints
+ * @highest_perf: the maximum performance an individual processor may reach,
+ *		  assuming ideal conditions
+ * @nominal_perf: the maximum sustained performance level of the processor,
+ *		  assuming ideal operating conditions
+ * @lowest_nonlinear_perf: the lowest performance level at which nonlinear power
+ *			   savings are achieved
+ * @lowest_perf: the absolute lowest performance level of the processor
+ * @max_freq: the frequency that mapped to highest_perf
+ * @min_freq: the frequency that mapped to lowest_perf
+ * @nominal_freq: the frequency that mapped to nominal_perf
+ * @lowest_nonlinear_freq: the frequency that mapped to lowest_nonlinear_perf
+ * @boost_supported: check whether the Processor or SBIOS supports boost mode
+ *
+ * The amd_cpudata is key private data for each CPU thread in AMD P-State, and
+ * represents all the attributes and goals that AMD P-State requests at runtime.
+ */
+struct amd_cpudata {
+	int	cpu;
+
+	struct	freq_qos_request req[2];
+	u64	cppc_req_cached;
+
+	u32	highest_perf;
+	u32	nominal_perf;
+	u32	lowest_nonlinear_perf;
+	u32	lowest_perf;
+
+	u32	max_freq;
+	u32	min_freq;
+	u32	nominal_freq;
+	u32	lowest_nonlinear_freq;
+
+	bool	boost_supported;
+};
+
+static inline int pstate_enable(bool enable)
+{
+	return wrmsrl_safe(MSR_AMD_CPPC_ENABLE, enable);
+}
+
+static int cppc_enable(bool enable)
+{
+	int cpu, ret = 0;
+
+	for_each_present_cpu(cpu) {
+		ret = cppc_set_enable(cpu, enable);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+DEFINE_STATIC_CALL(amd_pstate_enable, pstate_enable);
+
+static inline int amd_pstate_enable(bool enable)
+{
+	return static_call(amd_pstate_enable)(enable);
+}
+
+static int pstate_init_perf(struct amd_cpudata *cpudata)
+{
+	u64 cap1;
+
+	int ret = rdmsrl_safe_on_cpu(cpudata->cpu, MSR_AMD_CPPC_CAP1,
+				     &cap1);
+	if (ret)
+		return ret;
+
+	/*
+	 * TODO: Introduce AMD specific power feature.
+	 *
+	 * CPPC entry doesn't indicate the highest performance in some ASICs.
+	 */
+	WRITE_ONCE(cpudata->highest_perf, amd_get_highest_perf());
+
+	WRITE_ONCE(cpudata->nominal_perf, AMD_CPPC_NOMINAL_PERF(cap1));
+	WRITE_ONCE(cpudata->lowest_nonlinear_perf, AMD_CPPC_LOWNONLIN_PERF(cap1));
+	WRITE_ONCE(cpudata->lowest_perf, AMD_CPPC_LOWEST_PERF(cap1));
+
+	return 0;
+}
+
+static int cppc_init_perf(struct amd_cpudata *cpudata)
+{
+	struct cppc_perf_caps cppc_perf;
+
+	int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf);
+	if (ret)
+		return ret;
+
+	WRITE_ONCE(cpudata->highest_perf, amd_get_highest_perf());
+
+	WRITE_ONCE(cpudata->nominal_perf, cppc_perf.nominal_perf);
+	WRITE_ONCE(cpudata->lowest_nonlinear_perf,
+		   cppc_perf.lowest_nonlinear_perf);
+	WRITE_ONCE(cpudata->lowest_perf, cppc_perf.lowest_perf);
+
+	return 0;
+}
+
+DEFINE_STATIC_CALL(amd_pstate_init_perf, pstate_init_perf);
+
+static inline int amd_pstate_init_perf(struct amd_cpudata *cpudata)
+{
+	return static_call(amd_pstate_init_perf)(cpudata);
+}
+
+static void pstate_update_perf(struct amd_cpudata *cpudata, u32 min_perf,
+			       u32 des_perf, u32 max_perf, bool fast_switch)
+{
+	if (fast_switch)
+		wrmsrl(MSR_AMD_CPPC_REQ, READ_ONCE(cpudata->cppc_req_cached));
+	else
+		wrmsrl_on_cpu(cpudata->cpu, MSR_AMD_CPPC_REQ,
+			      READ_ONCE(cpudata->cppc_req_cached));
+}
+
+static void cppc_update_perf(struct amd_cpudata *cpudata,
+			     u32 min_perf, u32 des_perf,
+			     u32 max_perf, bool fast_switch)
+{
+	struct cppc_perf_ctrls perf_ctrls;
+
+	perf_ctrls.max_perf = max_perf;
+	perf_ctrls.min_perf = min_perf;
+	perf_ctrls.desired_perf = des_perf;
+
+	cppc_set_perf(cpudata->cpu, &perf_ctrls);
+}
+
+DEFINE_STATIC_CALL(amd_pstate_update_perf, pstate_update_perf);
+
+static inline void amd_pstate_update_perf(struct amd_cpudata *cpudata,
+					  u32 min_perf, u32 des_perf,
+					  u32 max_perf, bool fast_switch)
+{
+	static_call(amd_pstate_update_perf)(cpudata, min_perf, des_perf,
+					    max_perf, fast_switch);
+}
+
+static void amd_pstate_update(struct amd_cpudata *cpudata, u32 min_perf,
+			      u32 des_perf, u32 max_perf, bool fast_switch)
+{
+	u64 prev = READ_ONCE(cpudata->cppc_req_cached);
+	u64 value = prev;
+
+	value &= ~AMD_CPPC_MIN_PERF(~0L);
+	value |= AMD_CPPC_MIN_PERF(min_perf);
+
+	value &= ~AMD_CPPC_DES_PERF(~0L);
+	value |= AMD_CPPC_DES_PERF(des_perf);
+
+	value &= ~AMD_CPPC_MAX_PERF(~0L);
+	value |= AMD_CPPC_MAX_PERF(max_perf);
+
+	trace_amd_pstate_perf(min_perf, des_perf, max_perf,
+			      cpudata->cpu, (value != prev), fast_switch);
+
+	if (value == prev)
+		return;
+
+	WRITE_ONCE(cpudata->cppc_req_cached, value);
+
+	amd_pstate_update_perf(cpudata, min_perf, des_perf,
+			       max_perf, fast_switch);
+}
+
+static int amd_pstate_verify(struct cpufreq_policy_data *policy)
+{
+	cpufreq_verify_within_cpu_limits(policy);
+
+	return 0;
+}
+
+static int amd_pstate_target(struct cpufreq_policy *policy,
+			     unsigned int target_freq,
+			     unsigned int relation)
+{
+	struct cpufreq_freqs freqs;
+	struct amd_cpudata *cpudata = policy->driver_data;
+	unsigned long max_perf, min_perf, des_perf, cap_perf;
+
+	if (!cpudata->max_freq)
+		return -ENODEV;
+
+	cap_perf = READ_ONCE(cpudata->highest_perf);
+	min_perf = READ_ONCE(cpudata->lowest_nonlinear_perf);
+	max_perf = cap_perf;
+
+	freqs.old = policy->cur;
+	freqs.new = target_freq;
+
+	des_perf = DIV_ROUND_CLOSEST(target_freq * cap_perf,
+				     cpudata->max_freq);
+
+	cpufreq_freq_transition_begin(policy, &freqs);
+	amd_pstate_update(cpudata, min_perf, des_perf,
+			  max_perf, false);
+	cpufreq_freq_transition_end(policy, &freqs, false);
+
+	return 0;
+}
+
+static void amd_pstate_adjust_perf(unsigned int cpu,
+				   unsigned long _min_perf,
+				   unsigned long target_perf,
+				   unsigned long capacity)
+{
+	unsigned long max_perf, min_perf, des_perf,
+		      cap_perf, lowest_nonlinear_perf;
+	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	struct amd_cpudata *cpudata = policy->driver_data;
+
+	cap_perf = READ_ONCE(cpudata->highest_perf);
+	lowest_nonlinear_perf = READ_ONCE(cpudata->lowest_nonlinear_perf);
+
+	des_perf = cap_perf;
+	if (target_perf < capacity)
+		des_perf = DIV_ROUND_UP(cap_perf * target_perf, capacity);
+
+	min_perf = READ_ONCE(cpudata->highest_perf);
+	if (_min_perf < capacity)
+		min_perf = DIV_ROUND_UP(cap_perf * _min_perf, capacity);
+
+	if (min_perf < lowest_nonlinear_perf)
+		min_perf = lowest_nonlinear_perf;
+
+	max_perf = cap_perf;
+	if (max_perf < min_perf)
+		max_perf = min_perf;
+
+	des_perf = clamp_t(unsigned long, des_perf, min_perf, max_perf);
+
+	amd_pstate_update(cpudata, min_perf, des_perf, max_perf, true);
+}
+
+static int amd_get_min_freq(struct amd_cpudata *cpudata)
+{
+	struct cppc_perf_caps cppc_perf;
+
+	int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf);
+	if (ret)
+		return ret;
+
+	/* Switch to khz */
+	return cppc_perf.lowest_freq * 1000;
+}
+
+static int amd_get_max_freq(struct amd_cpudata *cpudata)
+{
+	struct cppc_perf_caps cppc_perf;
+	u32 max_perf, max_freq, nominal_freq, nominal_perf;
+	u64 boost_ratio;
+
+	int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf);
+	if (ret)
+		return ret;
+
+	nominal_freq = cppc_perf.nominal_freq;
+	nominal_perf = READ_ONCE(cpudata->nominal_perf);
+	max_perf = READ_ONCE(cpudata->highest_perf);
+
+	boost_ratio = div_u64(max_perf << SCHED_CAPACITY_SHIFT,
+			      nominal_perf);
+
+	max_freq = nominal_freq * boost_ratio >> SCHED_CAPACITY_SHIFT;
+
+	/* Switch to khz */
+	return max_freq * 1000;
+}
+
+static int amd_get_nominal_freq(struct amd_cpudata *cpudata)
+{
+	struct cppc_perf_caps cppc_perf;
+
+	int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf);
+	if (ret)
+		return ret;
+
+	/* Switch to khz */
+	return cppc_perf.nominal_freq * 1000;
+}
+
+static int amd_get_lowest_nonlinear_freq(struct amd_cpudata *cpudata)
+{
+	struct cppc_perf_caps cppc_perf;
+	u32 lowest_nonlinear_freq, lowest_nonlinear_perf,
+	    nominal_freq, nominal_perf;
+	u64 lowest_nonlinear_ratio;
+
+	int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf);
+	if (ret)
+		return ret;
+
+	nominal_freq = cppc_perf.nominal_freq;
+	nominal_perf = READ_ONCE(cpudata->nominal_perf);
+
+	lowest_nonlinear_perf = cppc_perf.lowest_nonlinear_perf;
+
+	lowest_nonlinear_ratio = div_u64(lowest_nonlinear_perf << SCHED_CAPACITY_SHIFT,
+					 nominal_perf);
+
+	lowest_nonlinear_freq = nominal_freq * lowest_nonlinear_ratio >> SCHED_CAPACITY_SHIFT;
+
+	/* Switch to khz */
+	return lowest_nonlinear_freq * 1000;
+}
+
+static int amd_pstate_set_boost(struct cpufreq_policy *policy, int state)
+{
+	struct amd_cpudata *cpudata = policy->driver_data;
+	int ret;
+
+	if (!cpudata->boost_supported) {
+		pr_err("Boost mode is not supported by this processor or SBIOS\n");
+		return -EINVAL;
+	}
+
+	if (state)
+		policy->cpuinfo.max_freq = cpudata->max_freq;
+	else
+		policy->cpuinfo.max_freq = cpudata->nominal_freq;
+
+	policy->max = policy->cpuinfo.max_freq;
+
+	ret = freq_qos_update_request(&cpudata->req[1],
+				      policy->cpuinfo.max_freq);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void amd_pstate_boost_init(struct amd_cpudata *cpudata)
+{
+	u32 highest_perf, nominal_perf;
+
+	highest_perf = READ_ONCE(cpudata->highest_perf);
+	nominal_perf = READ_ONCE(cpudata->nominal_perf);
+
+	if (highest_perf <= nominal_perf)
+		return;
+
+	cpudata->boost_supported = true;
+	amd_pstate_driver.boost_enabled = true;
+}
+
+static int amd_pstate_cpu_init(struct cpufreq_policy *policy)
+{
+	int min_freq, max_freq, nominal_freq, lowest_nonlinear_freq, ret;
+	struct device *dev;
+	struct amd_cpudata *cpudata;
+
+	dev = get_cpu_device(policy->cpu);
+	if (!dev)
+		return -ENODEV;
+
+	cpudata = kzalloc(sizeof(*cpudata), GFP_KERNEL);
+	if (!cpudata)
+		return -ENOMEM;
+
+	cpudata->cpu = policy->cpu;
+
+	ret = amd_pstate_init_perf(cpudata);
+	if (ret)
+		goto free_cpudata1;
+
+	min_freq = amd_get_min_freq(cpudata);
+	max_freq = amd_get_max_freq(cpudata);
+	nominal_freq = amd_get_nominal_freq(cpudata);
+	lowest_nonlinear_freq = amd_get_lowest_nonlinear_freq(cpudata);
+
+	if (min_freq < 0 || max_freq < 0 || min_freq > max_freq) {
+		dev_err(dev, "min_freq(%d) or max_freq(%d) value is incorrect\n",
+			min_freq, max_freq);
+		ret = -EINVAL;
+		goto free_cpudata1;
+	}
+
+	policy->cpuinfo.transition_latency = AMD_PSTATE_TRANSITION_LATENCY;
+	policy->transition_delay_us = AMD_PSTATE_TRANSITION_DELAY;
+
+	policy->min = min_freq;
+	policy->max = max_freq;
+
+	policy->cpuinfo.min_freq = min_freq;
+	policy->cpuinfo.max_freq = max_freq;
+
+	/* It will be updated by governor */
+	policy->cur = policy->cpuinfo.min_freq;
+
+	if (boot_cpu_has(X86_FEATURE_CPPC))
+		policy->fast_switch_possible = true;
+
+	ret = freq_qos_add_request(&policy->constraints, &cpudata->req[0],
+				   FREQ_QOS_MIN, policy->cpuinfo.min_freq);
+	if (ret < 0) {
+		dev_err(dev, "Failed to add min-freq constraint (%d)\n", ret);
+		goto free_cpudata1;
+	}
+
+	ret = freq_qos_add_request(&policy->constraints, &cpudata->req[1],
+				   FREQ_QOS_MAX, policy->cpuinfo.max_freq);
+	if (ret < 0) {
+		dev_err(dev, "Failed to add max-freq constraint (%d)\n", ret);
+		goto free_cpudata2;
+	}
+
+	/* Initial processor data capability frequencies */
+	cpudata->max_freq = max_freq;
+	cpudata->min_freq = min_freq;
+	cpudata->nominal_freq = nominal_freq;
+	cpudata->lowest_nonlinear_freq = lowest_nonlinear_freq;
+
+	policy->driver_data = cpudata;
+
+	amd_pstate_boost_init(cpudata);
+
+	return 0;
+
+free_cpudata2:
+	freq_qos_remove_request(&cpudata->req[0]);
+free_cpudata1:
+	kfree(cpudata);
+	return ret;
+}
+
+static int amd_pstate_cpu_exit(struct cpufreq_policy *policy)
+{
+	struct amd_cpudata *cpudata;
+
+	cpudata = policy->driver_data;
+
+	freq_qos_remove_request(&cpudata->req[1]);
+	freq_qos_remove_request(&cpudata->req[0]);
+	kfree(cpudata);
+
+	return 0;
+}
+
+/* Sysfs attributes */
+
+/*
+ * This frequency is to indicate the maximum hardware frequency.
+ * If boost is not active but supported, the frequency will be larger than the
+ * one in cpuinfo.
+ */
+static ssize_t show_amd_pstate_max_freq(struct cpufreq_policy *policy,
+					char *buf)
+{
+	int max_freq;
+	struct amd_cpudata *cpudata;
+
+	cpudata = policy->driver_data;
+
+	max_freq = amd_get_max_freq(cpudata);
+	if (max_freq < 0)
+		return max_freq;
+
+	return sprintf(&buf[0], "%u\n", max_freq);
+}
+
+static ssize_t show_amd_pstate_lowest_nonlinear_freq(struct cpufreq_policy *policy,
+						     char *buf)
+{
+	int freq;
+	struct amd_cpudata *cpudata;
+
+	cpudata = policy->driver_data;
+
+	freq = amd_get_lowest_nonlinear_freq(cpudata);
+	if (freq < 0)
+		return freq;
+
+	return sprintf(&buf[0], "%u\n", freq);
+}
+
+/*
+ * In some of ASICs, the highest_perf is not the one in the _CPC table, so we
+ * need to expose it to sysfs.
+ */
+static ssize_t show_amd_pstate_highest_perf(struct cpufreq_policy *policy,
+					    char *buf)
+{
+	u32 perf;
+	struct amd_cpudata *cpudata = policy->driver_data;
+
+	perf = READ_ONCE(cpudata->highest_perf);
+
+	return sprintf(&buf[0], "%u\n", perf);
+}
+
+cpufreq_freq_attr_ro(amd_pstate_max_freq);
+cpufreq_freq_attr_ro(amd_pstate_lowest_nonlinear_freq);
+
+cpufreq_freq_attr_ro(amd_pstate_highest_perf);
+
+static struct freq_attr *amd_pstate_attr[] = {
+	&amd_pstate_max_freq,
+	&amd_pstate_lowest_nonlinear_freq,
+	&amd_pstate_highest_perf,
+	NULL,
+};
+
+static struct cpufreq_driver amd_pstate_driver = {
+	.flags		= CPUFREQ_CONST_LOOPS | CPUFREQ_NEED_UPDATE_LIMITS,
+	.verify		= amd_pstate_verify,
+	.target		= amd_pstate_target,
+	.init		= amd_pstate_cpu_init,
+	.exit		= amd_pstate_cpu_exit,
+	.set_boost	= amd_pstate_set_boost,
+	.name		= "amd-pstate",
+	.attr           = amd_pstate_attr,
+};
+
+static int __init amd_pstate_init(void)
+{
+	int ret;
+
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
+		return -ENODEV;
+
+	if (!acpi_cpc_valid()) {
+		pr_debug("the _CPC object is not present in SBIOS\n");
+		return -ENODEV;
+	}
+
+	/* don't keep reloading if cpufreq_driver exists */
+	if (cpufreq_get_current_driver())
+		return -EEXIST;
+
+	/* capability check */
+	if (boot_cpu_has(X86_FEATURE_CPPC)) {
+		pr_debug("AMD CPPC MSR based functionality is supported\n");
+		amd_pstate_driver.adjust_perf = amd_pstate_adjust_perf;
+	} else if (shared_mem) {
+		static_call_update(amd_pstate_enable, cppc_enable);
+		static_call_update(amd_pstate_init_perf, cppc_init_perf);
+		static_call_update(amd_pstate_update_perf, cppc_update_perf);
+	} else {
+		pr_info("This processor supports shared memory solution, you can enable it with amd_pstate.shared_mem=1\n");
+		return -ENODEV;
+	}
+
+	/* enable amd pstate feature */
+	ret = amd_pstate_enable(true);
+	if (ret) {
+		pr_err("failed to enable amd-pstate with return %d\n", ret);
+		return ret;
+	}
+
+	ret = cpufreq_register_driver(&amd_pstate_driver);
+	if (ret)
+		pr_err("failed to register amd_pstate_driver with return %d\n",
+		       ret);
+
+	return ret;
+}
+
+static void __exit amd_pstate_exit(void)
+{
+	cpufreq_unregister_driver(&amd_pstate_driver);
+
+	amd_pstate_enable(false);
+}
+
+module_init(amd_pstate_init);
+module_exit(amd_pstate_exit);
+
+MODULE_AUTHOR("Huang Rui <ray.huang@amd.com>");
+MODULE_DESCRIPTION("AMD Processor P-state Frequency Driver");
+MODULE_LICENSE("GPL");

drivers/cpufreq/cpufreq.c

@@ -924,7 +924,7 @@ cpufreq_freq_attr_rw(scaling_max_freq);
 cpufreq_freq_attr_rw(scaling_governor);
 cpufreq_freq_attr_rw(scaling_setspeed);
 
-static struct attribute *default_attrs[] = {
+static struct attribute *cpufreq_attrs[] = {
 	&cpuinfo_min_freq.attr,
 	&cpuinfo_max_freq.attr,
 	&cpuinfo_transition_latency.attr,
@@ -938,6 +938,7 @@ static struct attribute *default_attrs[] = {
 	&scaling_setspeed.attr,
 	NULL
 };
+ATTRIBUTE_GROUPS(cpufreq);
 
 #define to_policy(k) container_of(k, struct cpufreq_policy, kobj)
 #define to_attr(a) container_of(a, struct freq_attr, attr)
@@ -1000,7 +1001,7 @@ static const struct sysfs_ops sysfs_ops = {
 
 static struct kobj_type ktype_cpufreq = {
 	.sysfs_ops	= &sysfs_ops,
-	.default_attrs	= default_attrs,
+	.default_groups	= cpufreq_groups,
 	.release	= cpufreq_sysfs_release,
 };
 
@@ -1403,7 +1404,7 @@ static int cpufreq_online(unsigned int cpu)
 
 		ret = freq_qos_add_request(&policy->constraints,
 					   policy->min_freq_req, FREQ_QOS_MIN,
-					   policy->min);
+					   FREQ_QOS_MIN_DEFAULT_VALUE);
 		if (ret < 0) {
 			/*
 			 * So we don't call freq_qos_remove_request() for an
@@ -1423,7 +1424,7 @@ static int cpufreq_online(unsigned int cpu)
 
 		ret = freq_qos_add_request(&policy->constraints,
 					   policy->max_freq_req, FREQ_QOS_MAX,
-					   policy->max);
+					   FREQ_QOS_MAX_DEFAULT_VALUE);
 		if (ret < 0) {
 			policy->max_freq_req = NULL;
 			goto out_destroy_policy;

drivers/cpufreq/cpufreq_conservative.c

@@ -257,7 +257,7 @@ gov_attr_rw(ignore_nice_load);
 gov_attr_rw(down_threshold);
 gov_attr_rw(freq_step);
 
-static struct attribute *cs_attributes[] = {
+static struct attribute *cs_attrs[] = {
 	&sampling_rate.attr,
 	&sampling_down_factor.attr,
 	&up_threshold.attr,
@@ -266,6 +266,7 @@ static struct attribute *cs_attributes[] = {
 	&freq_step.attr,
 	NULL
 };
+ATTRIBUTE_GROUPS(cs);
 
 /************************** sysfs end ************************/
 
@@ -315,7 +316,7 @@ static void cs_start(struct cpufreq_policy *policy)
 
 static struct dbs_governor cs_governor = {
 	.gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("conservative"),
-	.kobj_type = { .default_attrs = cs_attributes },
+	.kobj_type = { .default_groups = cs_groups },
 	.gov_dbs_update = cs_dbs_update,
 	.alloc = cs_alloc,
 	.free = cs_free,

drivers/cpufreq/cpufreq_ondemand.c

@@ -328,7 +328,7 @@ gov_attr_rw(sampling_down_factor);
 gov_attr_rw(ignore_nice_load);
 gov_attr_rw(powersave_bias);
 
-static struct attribute *od_attributes[] = {
+static struct attribute *od_attrs[] = {
 	&sampling_rate.attr,
 	&up_threshold.attr,
 	&sampling_down_factor.attr,
@@ -337,6 +337,7 @@ static struct attribute *od_attributes[] = {
 	&io_is_busy.attr,
 	NULL
 };
+ATTRIBUTE_GROUPS(od);
 
 /************************** sysfs end ************************/
 
@@ -401,7 +402,7 @@ static struct od_ops od_ops = {
 
 static struct dbs_governor od_dbs_gov = {
 	.gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("ondemand"),
-	.kobj_type = { .default_attrs = od_attributes },
+	.kobj_type = { .default_groups = od_groups },
 	.gov_dbs_update = od_dbs_update,
 	.alloc = od_alloc,
 	.free = od_free,

drivers/cpufreq/intel_pstate.c

@@ -664,19 +664,29 @@ static int intel_pstate_set_epb(int cpu, s16 pref)
  *	3		balance_power
  *	4		power
  */
+
+enum energy_perf_value_index {
+	EPP_INDEX_DEFAULT = 0,
+	EPP_INDEX_PERFORMANCE,
+	EPP_INDEX_BALANCE_PERFORMANCE,
+	EPP_INDEX_BALANCE_POWERSAVE,
+	EPP_INDEX_POWERSAVE,
+};
+
 static const char * const energy_perf_strings[] = {
-	"default",
-	"performance",
-	"balance_performance",
-	"balance_power",
-	"power",
+	[EPP_INDEX_DEFAULT] = "default",
+	[EPP_INDEX_PERFORMANCE] = "performance",
+	[EPP_INDEX_BALANCE_PERFORMANCE] = "balance_performance",
+	[EPP_INDEX_BALANCE_POWERSAVE] = "balance_power",
+	[EPP_INDEX_POWERSAVE] = "power",
 	NULL
 };
-static const unsigned int epp_values[] = {
-	HWP_EPP_PERFORMANCE,
-	HWP_EPP_BALANCE_PERFORMANCE,
-	HWP_EPP_BALANCE_POWERSAVE,
-	HWP_EPP_POWERSAVE
+static unsigned int epp_values[] = {
+	[EPP_INDEX_DEFAULT] = 0, /* Unused index */
+	[EPP_INDEX_PERFORMANCE] = HWP_EPP_PERFORMANCE,
+	[EPP_INDEX_BALANCE_PERFORMANCE] = HWP_EPP_BALANCE_PERFORMANCE,
+	[EPP_INDEX_BALANCE_POWERSAVE] = HWP_EPP_BALANCE_POWERSAVE,
+	[EPP_INDEX_POWERSAVE] = HWP_EPP_POWERSAVE,
 };
 
 static int intel_pstate_get_energy_pref_index(struct cpudata *cpu_data, int *raw_epp)
@@ -690,14 +700,14 @@ static int intel_pstate_get_energy_pref_index(struct cpudata *cpu_data, int *raw
 		return epp;
 
 	if (boot_cpu_has(X86_FEATURE_HWP_EPP)) {
-		if (epp == HWP_EPP_PERFORMANCE)
-			return 1;
-		if (epp == HWP_EPP_BALANCE_PERFORMANCE)
-			return 2;
-		if (epp == HWP_EPP_BALANCE_POWERSAVE)
-			return 3;
-		if (epp == HWP_EPP_POWERSAVE)
-			return 4;
+		if (epp == epp_values[EPP_INDEX_PERFORMANCE])
+			return EPP_INDEX_PERFORMANCE;
+		if (epp == epp_values[EPP_INDEX_BALANCE_PERFORMANCE])
+			return EPP_INDEX_BALANCE_PERFORMANCE;
+		if (epp == epp_values[EPP_INDEX_BALANCE_POWERSAVE])
+			return EPP_INDEX_BALANCE_POWERSAVE;
+		if (epp == epp_values[EPP_INDEX_POWERSAVE])
+			return EPP_INDEX_POWERSAVE;
 		*raw_epp = epp;
 		return 0;
 	} else if (boot_cpu_has(X86_FEATURE_EPB)) {
@@ -757,7 +767,7 @@ static int intel_pstate_set_energy_pref_index(struct cpudata *cpu_data,
 		if (use_raw)
 			epp = raw_epp;
 		else if (epp == -EINVAL)
-			epp = epp_values[pref_index - 1];
+			epp = epp_values[pref_index];
 
 		/*
 		 * To avoid confusion, refuse to set EPP to any values different
@@ -843,7 +853,7 @@ static ssize_t store_energy_performance_preference(
 		 * upfront.
 		 */
 		if (!raw)
-			epp = ret ? epp_values[ret - 1] : cpu->epp_default;
+			epp = ret ? epp_values[ret] : cpu->epp_default;
 
 		if (cpu->epp_cached != epp) {
 			int err;
@@ -1124,19 +1134,22 @@ static void intel_pstate_update_policies(void)
 		cpufreq_update_policy(cpu);
 }
 
+static void __intel_pstate_update_max_freq(struct cpudata *cpudata,
+					   struct cpufreq_policy *policy)
+{
+	policy->cpuinfo.max_freq = global.turbo_disabled_mf ?
+			cpudata->pstate.max_freq : cpudata->pstate.turbo_freq;
+	refresh_frequency_limits(policy);
+}
+
 static void intel_pstate_update_max_freq(unsigned int cpu)
 {
 	struct cpufreq_policy *policy = cpufreq_cpu_acquire(cpu);
-	struct cpudata *cpudata;
 
 	if (!policy)
 		return;
 
-	cpudata = all_cpu_data[cpu];
-	policy->cpuinfo.max_freq = global.turbo_disabled_mf ?
-			cpudata->pstate.max_freq : cpudata->pstate.turbo_freq;
-
-	refresh_frequency_limits(policy);
+	__intel_pstate_update_max_freq(all_cpu_data[cpu], policy);
 
 	cpufreq_cpu_release(policy);
 }
@@ -1584,8 +1597,15 @@ static void intel_pstate_notify_work(struct work_struct *work)
 {
 	struct cpudata *cpudata =
 		container_of(to_delayed_work(work), struct cpudata, hwp_notify_work);
+	struct cpufreq_policy *policy = cpufreq_cpu_acquire(cpudata->cpu);
+
+	if (policy) {
+		intel_pstate_get_hwp_cap(cpudata);
+		__intel_pstate_update_max_freq(cpudata, policy);
+
+		cpufreq_cpu_release(policy);
+	}
 
-	cpufreq_update_policy(cpudata->cpu);
 	wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_STATUS, 0);
 }
 
@@ -1679,10 +1699,18 @@ static void intel_pstate_hwp_enable(struct cpudata *cpudata)
 		wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_INTERRUPT, 0x00);
 
 	wrmsrl_on_cpu(cpudata->cpu, MSR_PM_ENABLE, 0x1);
-	if (cpudata->epp_default == -EINVAL)
-		cpudata->epp_default = intel_pstate_get_epp(cpudata, 0);
 
 	intel_pstate_enable_hwp_interrupt(cpudata);
+
+	if (cpudata->epp_default >= 0)
+		return;
+
+	if (epp_values[EPP_INDEX_BALANCE_PERFORMANCE] == HWP_EPP_BALANCE_PERFORMANCE) {
+		cpudata->epp_default = intel_pstate_get_epp(cpudata, 0);
+	} else {
+		cpudata->epp_default = epp_values[EPP_INDEX_BALANCE_PERFORMANCE];
+		intel_pstate_set_epp(cpudata, cpudata->epp_default);
+	}
 }
 
 static int atom_get_min_pstate(void)
@@ -2486,10 +2514,7 @@ static void intel_pstate_update_perf_limits(struct cpudata *cpu,
 	 * HWP needs some special consideration, because HWP_REQUEST uses
 	 * abstract values to represent performance rather than pure ratios.
 	 */
-	if (hwp_active) {
-		intel_pstate_get_hwp_cap(cpu);
-
-		if (cpu->pstate.scaling != perf_ctl_scaling) {
+	if (hwp_active && cpu->pstate.scaling != perf_ctl_scaling) {
 		int scaling = cpu->pstate.scaling;
 		int freq;
 
@@ -2498,7 +2523,6 @@ static void intel_pstate_update_perf_limits(struct cpudata *cpu,
 		freq = min_policy_perf * perf_ctl_scaling;
 		min_policy_perf = DIV_ROUND_UP(freq, scaling);
 	}
-	}
 
 	pr_debug("cpu:%d min_policy_perf:%d max_policy_perf:%d\n",
 		 cpu->cpu, min_policy_perf, max_policy_perf);
@@ -3349,6 +3373,16 @@ static bool intel_pstate_hwp_is_enabled(void)
 	return !!(value & 0x1);
 }
 
+static const struct x86_cpu_id intel_epp_balance_perf[] = {
+	/*
+	 * Set EPP value as 102, this is the max suggested EPP
+	 * which can result in one core turbo frequency for
+	 * AlderLake Mobile CPUs.
+	 */
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, 102),
+	{}
+};
+
 static int __init intel_pstate_init(void)
 {
 	static struct cpudata **_all_cpu_data;
@@ -3438,6 +3472,13 @@ static int __init intel_pstate_init(void)
 
 	intel_pstate_sysfs_expose_params();
 
+	if (hwp_active) {
+		const struct x86_cpu_id *id = x86_match_cpu(intel_epp_balance_perf);
+
+		if (id)
+			epp_values[EPP_INDEX_BALANCE_PERFORMANCE] = id->driver_data;
+	}
+
 	mutex_lock(&intel_pstate_driver_lock);
 	rc = intel_pstate_register_driver(default_driver);
 	mutex_unlock(&intel_pstate_driver_lock);

drivers/cpufreq/mediatek-cpufreq-hw.c

@@ -36,6 +36,8 @@ enum {
 struct mtk_cpufreq_data {
 	struct cpufreq_frequency_table *table;
 	void __iomem *reg_bases[REG_ARRAY_SIZE];
+	struct resource *res;
+	void __iomem *base;
 	int nr_opp;
 };
 
@@ -156,6 +158,7 @@ static int mtk_cpu_resources_init(struct platform_device *pdev,
 {
 	struct mtk_cpufreq_data *data;
 	struct device *dev = &pdev->dev;
+	struct resource *res;
 	void __iomem *base;
 	int ret, i;
 	int index;
@@ -170,9 +173,26 @@ static int mtk_cpu_resources_init(struct platform_device *pdev,
 	if (index < 0)
 		return index;
 
-	base = devm_platform_ioremap_resource(pdev, index);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, index);
+	if (!res) {
+		dev_err(dev, "failed to get mem resource %d\n", index);
+		return -ENODEV;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), res->name)) {
+		dev_err(dev, "failed to request resource %pR\n", res);
+		return -EBUSY;
+	}
+
+	base = ioremap(res->start, resource_size(res));
+	if (!base) {
+		dev_err(dev, "failed to map resource %pR\n", res);
+		ret = -ENOMEM;
+		goto release_region;
+	}
+
+	data->base = base;
+	data->res = res;
 
 	for (i = REG_FREQ_LUT_TABLE; i < REG_ARRAY_SIZE; i++)
 		data->reg_bases[i] = base + offsets[i];
@@ -187,6 +207,9 @@ static int mtk_cpu_resources_init(struct platform_device *pdev,
 	policy->driver_data = data;
 
 	return 0;
+release_region:
+	release_mem_region(res->start, resource_size(res));
+	return ret;
 }
 
 static int mtk_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
@@ -233,9 +256,13 @@ static int mtk_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 static int mtk_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
 {
 	struct mtk_cpufreq_data *data = policy->driver_data;
+	struct resource *res = data->res;
+	void __iomem *base = data->base;
 
 	/* HW should be in paused state now */
 	writel_relaxed(0x0, data->reg_bases[REG_FREQ_ENABLE]);
+	iounmap(base);
+	release_mem_region(res->start, resource_size(res));
 
 	return 0;
 }

drivers/cpufreq/qcom-cpufreq-hw.c

@@ -46,6 +46,7 @@ struct qcom_cpufreq_data {
 	 */
 	struct mutex throttle_lock;
 	int throttle_irq;
+	char irq_name[15];
 	bool cancel_throttle;
 	struct delayed_work throttle_work;
 	struct cpufreq_policy *policy;
@@ -275,10 +276,10 @@ static unsigned int qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data)
 
 static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
 {
-	unsigned long max_capacity, capacity, freq_hz, throttled_freq;
 	struct cpufreq_policy *policy = data->policy;
 	int cpu = cpumask_first(policy->cpus);
 	struct device *dev = get_cpu_device(cpu);
+	unsigned long freq_hz, throttled_freq;
 	struct dev_pm_opp *opp;
 	unsigned int freq;
 
@@ -295,16 +296,8 @@ static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
 
 	throttled_freq = freq_hz / HZ_PER_KHZ;
 
-	/* Update thermal pressure */
-
-	max_capacity = arch_scale_cpu_capacity(cpu);
-	capacity = mult_frac(max_capacity, throttled_freq, policy->cpuinfo.max_freq);
-
-	/* Don't pass boost capacity to scheduler */
-	if (capacity > max_capacity)
-		capacity = max_capacity;
-
-	arch_set_thermal_pressure(policy->cpus, max_capacity - capacity);
+	/* Update thermal pressure (the boost frequencies are accepted) */
+	arch_update_thermal_pressure(policy->related_cpus, throttled_freq);
 
 	/*
 	 * In the unlikely case policy is unregistered do not enable
@@ -342,9 +335,9 @@ static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
 
 	/* Disable interrupt and enable polling */
 	disable_irq_nosync(c_data->throttle_irq);
-	qcom_lmh_dcvs_notify(c_data);
+	schedule_delayed_work(&c_data->throttle_work, 0);
 
-	return 0;
+	return IRQ_HANDLED;
 }
 
 static const struct qcom_cpufreq_soc_data qcom_soc_data = {
@@ -375,16 +368,17 @@ static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index)
 {
 	struct qcom_cpufreq_data *data = policy->driver_data;
 	struct platform_device *pdev = cpufreq_get_driver_data();
-	char irq_name[15];
 	int ret;
 
 	/*
 	 * Look for LMh interrupt. If no interrupt line is specified /
 	 * if there is an error, allow cpufreq to be enabled as usual.
 	 */
-	data->throttle_irq = platform_get_irq(pdev, index);
-	if (data->throttle_irq <= 0)
-		return data->throttle_irq == -EPROBE_DEFER ? -EPROBE_DEFER : 0;
+	data->throttle_irq = platform_get_irq_optional(pdev, index);
+	if (data->throttle_irq == -ENXIO)
+		return 0;
+	if (data->throttle_irq < 0)
+		return data->throttle_irq;
 
 	data->cancel_throttle = false;
 	data->policy = policy;
@@ -392,14 +386,19 @@ static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index)
 	mutex_init(&data->throttle_lock);
 	INIT_DEFERRABLE_WORK(&data->throttle_work, qcom_lmh_dcvs_poll);
 
-	snprintf(irq_name, sizeof(irq_name), "dcvsh-irq-%u", policy->cpu);
+	snprintf(data->irq_name, sizeof(data->irq_name), "dcvsh-irq-%u", policy->cpu);
 	ret = request_threaded_irq(data->throttle_irq, NULL, qcom_lmh_dcvs_handle_irq,
-				   IRQF_ONESHOT, irq_name, data);
+				   IRQF_ONESHOT, data->irq_name, data);
 	if (ret) {
-		dev_err(&pdev->dev, "Error registering %s: %d\n", irq_name, ret);
+		dev_err(&pdev->dev, "Error registering %s: %d\n", data->irq_name, ret);
 		return 0;
 	}
 
+	ret = irq_set_affinity_hint(data->throttle_irq, policy->cpus);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n",
+			data->irq_name, data->throttle_irq);
+
 	return 0;
 }
 

drivers/thermal/cpufreq_cooling.c

@@ -462,7 +462,6 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 	struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
 	struct cpumask *cpus;
 	unsigned int frequency;
-	unsigned long max_capacity, capacity;
 	int ret;
 
 	/* Request state should be less than max_level */
@@ -479,10 +478,7 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
 	if (ret >= 0) {
 		cpufreq_cdev->cpufreq_state = state;
 		cpus = cpufreq_cdev->policy->related_cpus;
-		max_capacity = arch_scale_cpu_capacity(cpumask_first(cpus));
-		capacity = frequency * max_capacity;
-		capacity /= cpufreq_cdev->policy->cpuinfo.max_freq;
-		arch_set_thermal_pressure(cpus, max_capacity - capacity);
+		arch_update_thermal_pressure(cpus, frequency);
 		ret = 0;
 	}
 

include/acpi/cppc_acpi.h

@@ -138,6 +138,7 @@ extern int cppc_get_desired_perf(int cpunum, u64 *desired_perf);
 extern int cppc_get_nominal_perf(int cpunum, u64 *nominal_perf);
 extern int cppc_get_perf_ctrs(int cpu, struct cppc_perf_fb_ctrs *perf_fb_ctrs);
 extern int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls);
+extern int cppc_set_enable(int cpu, bool enable);
 extern int cppc_get_perf_caps(int cpu, struct cppc_perf_caps *caps);
 extern bool acpi_cpc_valid(void);
 extern int acpi_get_psd_map(unsigned int cpu, struct cppc_cpudata *cpu_data);
@@ -162,6 +163,10 @@ static inline int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
 {
 	return -ENOTSUPP;
 }
+static inline int cppc_set_enable(int cpu, bool enable)
+{
+	return -ENOTSUPP;
+}
 static inline int cppc_get_perf_caps(int cpu, struct cppc_perf_caps *caps)
 {
 	return -ENOTSUPP;

include/linux/arch_topology.h

@@ -56,8 +56,8 @@ static inline unsigned long topology_get_thermal_pressure(int cpu)
 	return per_cpu(thermal_pressure, cpu);
 }
 
-void topology_set_thermal_pressure(const struct cpumask *cpus,
-				   unsigned long th_pressure);
+void topology_update_thermal_pressure(const struct cpumask *cpus,
+				      unsigned long capped_freq);
 
 struct cpu_topology {
 	int thread_id;

include/linux/sched/topology.h

@@ -266,10 +266,10 @@ unsigned long arch_scale_thermal_pressure(int cpu)
 }
 #endif
 
-#ifndef arch_set_thermal_pressure
+#ifndef arch_update_thermal_pressure
 static __always_inline
-void arch_set_thermal_pressure(const struct cpumask *cpus,
-			       unsigned long th_pressure)
+void arch_update_thermal_pressure(const struct cpumask *cpus,
+				  unsigned long capped_frequency)
 { }
 #endif
 

init/Kconfig

@@ -550,7 +550,7 @@ config SCHED_THERMAL_PRESSURE
 	  i.e. put less load on throttled CPUs than on non/less throttled ones.
 
 	  This requires the architecture to implement
-	  arch_set_thermal_pressure() and arch_scale_thermal_pressure().
+	  arch_update_thermal_pressure() and arch_scale_thermal_pressure().
 
 config BSD_PROCESS_ACCT
 	bool "BSD Process Accounting"