Commit 5576d187 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix register save area alignment for swapcontext syscall
  [POWERPC] Fix PCI device channel state initialization
  [POWERPC] Update MTD OF documentation
  [POWERPC] Probe Efika platform before CHRP.
  [POWERPC] Fix build of cell zImage.initrd
  [POWERPC] iSeries: fix CONFIG_VIOPATH dependency
  [POWERPC] iSeries: fix viocons init
  [POWERPC] iSeries: fix viocd init
  [POWERPC] iSeries: fix iseries_veth init
  [POWERPC] iSeries: fix viotape init
  [POWERPC] iSeries: fix viodasd init
  [POWERPC] Workaround oldworld OF bug with IRQs & P2P bridges
  [POWERPC] powerpc: add scanning of ebc bus to of_platform
  [POWERPC] spufs: fix assignment of node numbers
  [POWERPC] cell: Fix spufs with "new style" device-tree
  [POWERPC] cell: Enable spider workarounds on all PCI buses
  [POWERPC] cell: add forward struct declarations to spu.h
  [POWERPC] cell: update cell_defconfig
parents ee2fae03 1c9bb1a0
......@@ -1703,29 +1703,32 @@ platforms are moved over to use the flattened-device-tree model.
Required properties:
- device_type : has to be "rom"
- compatible : Should specify what this ROM device is compatible with
(i.e. "onenand"). Currently, this is most likely to be "direct-mapped"
(which corresponds to the MTD physmap mapping driver).
- regs : Offset and length of the register set (or memory mapping) for
- compatible : Should specify what this flash device is compatible with.
Currently, this is most likely to be "direct-mapped" (which
corresponds to the MTD physmap mapping driver).
- reg : Offset and length of the register set (or memory mapping) for
the device.
- bank-width : Width of the flash data bus in bytes. Required
for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
Recommended properties :
- bank-width : Width of the flash data bus in bytes. Required
for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
- partitions : Several pairs of 32-bit values where the first value is
partition's offset from the start of the device and the second one is
partition size in bytes with LSB used to signify a read only
partititon (so, the parition size should always be an even number).
partition (so, the parition size should always be an even number).
- partition-names : The list of concatenated zero terminated strings
representing the partition names.
- probe-type : The type of probe which should be done for the chip
(JEDEC vs CFI actually). Valid ONLY for NOR flashes.
Example:
flash@ff000000 {
device_type = "rom";
compatible = "direct-mapped";
regs = <ff000000 01000000>;
probe-type = "CFI";
reg = <ff000000 01000000>;
bank-width = <4>;
partitions = <00000000 00f80000
00f80000 00080001>;
......
......@@ -152,6 +152,9 @@ $(obj)/zImage.initrd.miboot: vmlinux $(wrapperbits)
$(obj)/zImage.ps3: vmlinux
$(STRIP) -s -R .comment $< -o $@
$(obj)/zImage.initrd.ps3: vmlinux
@echo " WARNING zImage.initrd.ps3 not supported (yet)"
$(obj)/uImage: vmlinux $(wrapperbits)
$(call cmd,wrap,uboot)
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19-rc6
# Wed Nov 22 15:33:04 2006
# Linux kernel version: 2.6.20-rc1
# Tue Dec 19 14:59:53 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
......@@ -10,6 +10,8 @@ CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
......@@ -23,6 +25,7 @@ CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
......@@ -66,6 +69,7 @@ CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
......@@ -128,14 +132,16 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_APUS is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_PS3=y
CONFIG_PPC_NATIVE=y
CONFIG_UDBG_RTAS_CONSOLE=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
......@@ -177,12 +183,14 @@ CONFIG_CBE_CPUFREQ=m
CONFIG_PS3_HTAB_SIZE=20
# CONFIG_PS3_DYNAMIC_DMA is not set
CONFIG_PS3_USE_LPAR_ADDR=y
CONFIG_PS3_VUART=y
#
# Kernel options
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
......@@ -237,6 +245,7 @@ CONFIG_GENERIC_ISA_DMA=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
......@@ -270,7 +279,10 @@ CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
......@@ -289,6 +301,7 @@ CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
......@@ -317,31 +330,67 @@ CONFIG_NETFILTER=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK_ENABLED is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CT_PROTO_SCTP=y
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
......@@ -373,6 +422,7 @@ CONFIG_IP_NF_QUEUE=m
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
......@@ -428,6 +478,7 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
......@@ -457,6 +508,7 @@ CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
......@@ -468,7 +520,6 @@ CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
......@@ -492,6 +543,7 @@ CONFIG_BLK_DEV_AEC62XX=y
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
......@@ -505,8 +557,74 @@ CONFIG_IDEDMA_AUTO=y
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
CONFIG_SCSI=m
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
......@@ -538,6 +656,9 @@ CONFIG_DM_MULTIPATH=m
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
......@@ -552,6 +673,7 @@ CONFIG_DM_MULTIPATH=m
#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
......@@ -559,7 +681,7 @@ CONFIG_DM_MULTIPATH=m
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
CONFIG_BONDING=y
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
......@@ -604,11 +726,11 @@ CONFIG_E1000_NAPI=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
# CONFIG_SKY2 is not set
CONFIG_SKY2=m
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_SPIDER_NET=m
CONFIG_SPIDER_NET=y
# CONFIG_QLA3XXX is not set
#
......@@ -618,6 +740,7 @@ CONFIG_SPIDER_NET=m
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
......@@ -637,6 +760,7 @@ CONFIG_SPIDER_NET=m
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
......@@ -703,6 +827,7 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
......@@ -729,6 +854,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
......@@ -756,16 +882,17 @@ CONFIG_WATCHDOG_RTAS=y
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
......@@ -855,12 +982,14 @@ CONFIG_I2C_ALGOBIT=y
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
# CONFIG_FB_IBM_GXT4500 is not set
#
# Console display driver support
......@@ -874,18 +1003,145 @@ CONFIG_DUMMY_CONSOLE=y
#
# CONFIG_SOUND is not set
#
# HID Devices
#
CONFIG_HID=m
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
......@@ -912,7 +1168,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# InfiniBand support
#
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_ADDR_TRANS=y
......@@ -922,6 +1178,8 @@ CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
# CONFIG_INFINIBAND_SRP is not set
# CONFIG_INFINIBAND_ISER is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
......@@ -945,6 +1203,10 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
# DMA Devices
#
#
# Virtualization
#
#
# File systems
#
......@@ -1028,23 +1290,18 @@ CONFIG_RAMFS=y
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
......@@ -1119,9 +1376,15 @@ CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
......@@ -1130,7 +1393,10 @@ CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
#
# Instrumentation Support
......@@ -1146,6 +1412,8 @@ CONFIG_OPROFILE=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
......@@ -1159,12 +1427,11 @@ CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
......@@ -1191,6 +1458,7 @@ CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
......@@ -1199,8 +1467,10 @@ CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
......
......@@ -50,6 +50,7 @@ static struct of_device_id of_default_bus_ids[] = {
{ .type = "plb5", },
{ .type = "plb4", },
{ .type = "opb", },
{ .type = "ebc", },
{},
};
......
......@@ -360,6 +360,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
DBG(" class: 0x%x\n", dev->class);
dev->current_state = 4; /* unknown power state */
dev->error_state = pci_channel_io_normal;
if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
/* a PCI-PCI bridge */
......
......@@ -920,9 +920,20 @@ static int of_irq_map_oldworld(struct device_node *device, int index,
/*
* Old machines just have a list of interrupt numbers
* and no interrupt-controller nodes.
* and no interrupt-controller nodes. We also have dodgy
* cases where the APPL,interrupts property is completely
* missing behind pci-pci bridges and we have to get it
* from the parent (the bridge itself, as apple just wired
* everything together on these)
*/
ints = get_property(device, "AAPL,interrupts", &intlen);
while (device) {
ints = get_property(device, "AAPL,interrupts", &intlen);
if (ints != NULL)
break;
device = device->parent;
if (device && strcmp(device->type, "pci") != 0)
break;
}
if (ints == NULL)
return -EINVAL;
intlen /= sizeof(u32);
......
......@@ -835,11 +835,21 @@ long sys_swapcontext(struct ucontext __user *old_ctx,
return -EINVAL;
if (old_ctx != NULL) {
struct mcontext __user *mctx;
/*
* old_ctx might not be 16-byte aligned, in which
* case old_ctx->uc_mcontext won't be either.
* Because we have the old_ctx->uc_pad2 field
* before old_ctx->uc_mcontext, we need to round down
* from &old_ctx->uc_mcontext to a 16-byte boundary.
*/
mctx = (struct mcontext __user *)
((unsigned long) &old_ctx->uc_mcontext & ~0xfUL);
if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
|| save_user_regs(regs, &old_ctx->uc_mcontext, 0)
|| save_user_regs(regs, mctx, 0)
|| put_sigset_t(&old_ctx->uc_sigmask, &current->blocked)
|| __put_user(to_user_ptr(&old_ctx->uc_mcontext),
&old_ctx->uc_regs))
|| __put_user(to_user_ptr(mctx), &old_ctx->uc_regs))
return -EFAULT;
}
if (new_ctx == NULL)
......
......@@ -5,9 +5,9 @@ ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_PPC_PMAC) += powermac/
endif
endif
obj-$(CONFIG_PPC_MPC52xx) += 52xx/
obj-$(CONFIG_PPC_CHRP) += chrp/
obj-$(CONFIG_4xx) += 4xx/
obj-$(CONFIG_PPC_MPC52xx) += 52xx/
obj-$(CONFIG_PPC_83xx) += 83xx/
obj-$(CONFIG_PPC_85xx) += 85xx/
obj-$(CONFIG_PPC_86xx) += 86xx/
......
......@@ -37,7 +37,7 @@
*/
#define SPIDER_DISABLE_PREFETCH
#define MAX_SPIDERS 2
#define MAX_SPIDERS 3
static struct spider_pci_bus {
void __iomem *regs;
......
......@@ -37,8 +37,9 @@
#include "interrupt.h"
#include "spu_priv1_mmio.h"
static DEFINE_MUTEX(add_spumem_mutex);
struct spu_pdata {
int nid;
struct device_node *devnode;
struct spu_priv1 __iomem *priv1;
};
......@@ -56,20 +57,9 @@ struct device_node *spu_devnode(struct spu *spu)
EXPORT_SYMBOL_GPL(spu_devnode);
static int __init find_spu_node_id(struct device_node *spe)
{
const unsigned int *id;
struct device_node *cpu;
cpu = spe->parent->parent;
id = get_property(cpu, "node-id", NULL);
return id ? *id : 0;
}
static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe,
const char *prop)
{
static DEFINE_MUTEX(add_spumem_mutex);
const struct address_prop {
unsigned long address;
unsigned int len;
......@@ -87,7 +77,7 @@ static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe,
start_pfn = p->address >> PAGE_SHIFT;
nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
pgdata = NODE_DATA(spu_get_pdata(spu)->nid);
pgdata = NODE_DATA(spu->node);
zone = pgdata->node_zones;
/* XXX rethink locking here */
......@@ -140,6 +130,7 @@ static int __init spu_map_interrupts_old(struct spu *spu,
{
unsigned int isrc;
const u32 *tmp;
int nid;
/* Get the interrupt source unit from the device-tree */
tmp = get_property(np, "isrc", NULL);
......@@ -147,8 +138,15 @@ static int __init spu_map_interrupts_old(struct spu *spu,
return -ENODEV;
isrc = tmp[0];
tmp = get_property(np->parent->parent, "node-id", NULL);
if (!tmp) {
printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__);
nid = spu->node;
} else
nid = tmp[0];
/* Add the node number */
isrc |= spu->node << IIC_IRQ_NODE_SHIFT;
isrc |= nid << IIC_IRQ_NODE_SHIFT;
/* Now map interrupts of all 3 classes */
spu->irqs[0] = irq_create_mapping(NULL, IIC_IRQ_CLASS_0 | isrc);
......@@ -237,70 +235,88 @@ static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
return ret;
}
static int spu_map_resource(struct device_node *node, int nr,
void __iomem** virt, unsigned long *phys)
static int spu_map_resource(struct spu *spu, int nr,
void __iomem** virt, unsigned long *phys)
{
struct device_node *np = spu_get_pdata(spu)->devnode;
unsigned long start_pfn, nr_pages;
struct pglist_data *pgdata;
struct zone *zone;
struct resource resource = { };
unsigned long len;
int ret;
ret = of_address_to_resource(node, nr, &resource);
ret = of_address_to_resource(np, nr, &resource);
if (ret)
goto out;
if (phys)
*phys = resource.start;
*virt = ioremap(resource.start, resource.end - resource.start);
len = resource.end - resource.start + 1;
*virt = ioremap(resource.start, len);
if (!*virt)
ret = -EINVAL;
start_pfn = resource.start >> PAGE_SHIFT;
nr_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
pgdata = NODE_DATA(spu->node);
zone = pgdata->node_zones;
/* XXX rethink locking here */
mutex_lock(&add_spumem_mutex);
ret = __add_pages(zone, start_pfn, nr_pages);
mutex_unlock(&add_spumem_mutex);
out:
return ret;
}
static int __init spu_map_device(struct spu *spu, struct device_node *node)
static int __init spu_map_device(struct spu *spu)
{
struct device_node *np = spu_get_pdata(spu)->devnode;
int ret = -ENODEV;
spu->name = get_property(node, "name", NULL);
spu->name = get_property(np, "name", NULL);
if (!spu->name)
goto out;
ret = spu_map_resource(node, 0, (void __iomem**)&spu->local_store,
&spu->local_store_phys);
ret = spu_map_resource(spu, 0, (void __iomem**)&spu->local_store,
&spu->local_store_phys);
if (ret) {
pr_debug("spu_new: failed to map %s resource 0\n",
node->full_name);
np->full_name);
goto out;
}
ret = spu_map_resource(node, 1, (void __iomem**)&spu->problem,
&spu->problem_phys);
ret = spu_map_resource(spu, 1, (void __iomem**)&spu->problem,
&spu->problem_phys);
if (ret) {
pr_debug("spu_new: failed to map %s resource 1\n",
node->full_name);
np->full_name);
goto out_unmap;
}
ret = spu_map_resource(node, 2, (void __iomem**)&spu->priv2,
NULL);
ret = spu_map_resource(spu, 2, (void __iomem**)&spu->priv2, NULL);
if (ret) {
pr_debug("spu_new: failed to map %s resource 2\n",
node->full_name);
np->full_name);
goto out_unmap;
}
if (!firmware_has_feature(FW_FEATURE_LPAR))
ret = spu_map_resource(node, 3,
(void __iomem**)&spu_get_pdata(spu)->priv1, NULL);
ret = spu_map_resource(spu, 3,
(void __iomem**)&spu_get_pdata(spu)->priv1, NULL);
if (ret) {
pr_debug("spu_new: failed to map %s resource 3\n",
node->full_name);
np->full_name);
goto out_unmap;
}
pr_debug("spu_new: %s maps:\n", node->full_name);
pr_debug("spu_new: %s maps:\n", np->full_name);
pr_debug(" local store : 0x%016lx -> 0x%p\n",
spu->local_store_phys, spu->local_store);
pr_debug(" problem state : 0x%016lx -> 0x%p\n",
spu->problem_phys, spu->problem);
pr_debug(" priv2 : 0x%p\n", spu->priv2);
pr_debug(" priv1 : 0x%p\n",
spu_get_pdata(spu)->priv1);
spu_get_pdata(spu)->priv1);
return 0;
......@@ -340,8 +356,9 @@ static int __init of_create_spu(struct spu *spu, void *data)
ret = -ENOMEM;
goto out;
}
spu_get_pdata(spu)->devnode = of_node_get(spe);
spu->node = find_spu_node_id(spe);
spu->node = of_node_to_nid(spe);
if (spu->node >= MAX_NUMNODES) {
printk(KERN_WARNING "SPE %s on node %d ignored,"
" node number too big\n", spe->full_name, spu->node);
......@@ -350,11 +367,7 @@ static int __init of_create_spu(struct spu *spu, void *data)
goto out_free;
}
spu_get_pdata(spu)->nid = of_node_to_nid(spe);
if (spu_get_pdata(spu)->nid == -1)
spu_get_pdata(spu)->nid = 0;
ret = spu_map_device(spu, spe);
ret = spu_map_device(spu);
/* try old method */
if (ret)
ret = spu_map_device_old(spu, spe);
......@@ -367,8 +380,6 @@ static int __init of_create_spu(struct spu *spu, void *data)
if (ret)
goto out_unmap;
spu_get_pdata(spu)->devnode = of_node_get(spe);
pr_debug(KERN_DEBUG "Using SPE %s %p %p %p %p %d\n", spu->name,
spu->local_store, spu->problem, spu_get_pdata(spu)->priv1,
spu->priv2, spu->number);
......
......@@ -31,5 +31,5 @@ endmenu
config VIOPATH
bool
depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || VETH
depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || ISERIES_VETH
default y
......@@ -49,6 +49,7 @@
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/hv_lp_config.h>
#include <asm/iseries/vio.h>
#include <asm/firmware.h>
MODULE_DESCRIPTION("iSeries Virtual DASD");
MODULE_AUTHOR("Dave Boutcher");
......@@ -769,6 +770,11 @@ static int __init viodasd_init(void)
{
int rc;
if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
rc = -ENODEV;
goto early_fail;
}
/* Try to open to our host lp */
if (viopath_hostLp == HvLpIndexInvalid)
vio_set_hostlp();
......
......@@ -47,6 +47,7 @@
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/vio.h>
#include <asm/firmware.h>
#define VIOCD_DEVICE "iseries/vcd"
......@@ -748,6 +749,9 @@ static int __init viocd_init(void)
struct proc_dir_entry *e;
int ret = 0;
if (!firmware_has_feature(FW_FEATURE_ISERIES))
return -ENODEV;
if (viopath_hostLp == HvLpIndexInvalid) {
vio_set_hostlp();
/* If we don't have a host, bail out */
......
......@@ -42,6 +42,7 @@
#include <linux/tty_flip.h>
#include <linux/sysrq.h>
#include <asm/firmware.h>
#include <asm/iseries/vio.h>
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/hv_call_event.h>
......@@ -1060,6 +1061,9 @@ static int __init viocons_init2(void)
atomic_t wait_flag;
int rc;
if (!firmware_has_feature(FW_FEATURE_ISERIES))
return -ENODEV;
/* +2 for fudge */
rc = viopath_open(HvLpConfig_getPrimaryLpIndex(),
viomajorsubtype_chario, VIOCHAR_WINDOW + 2);
......@@ -1145,6 +1149,9 @@ static int __init viocons_init(void)
{
int i;
if (!firmware_has_feature(FW_FEATURE_ISERIES))
return -ENODEV;
printk(VIOCONS_KERN_INFO "registering console\n");
for (i = 0; i < VTTY_PORTS; i++) {
port_info[i].lp = HvLpIndexInvalid;
......
......@@ -49,7 +49,7 @@
#include <asm/uaccess.h>
#include <asm/ioctls.h>
#include <asm/firmware.h>
#include <asm/vio.h>
#include <asm/iseries/vio.h>
#include <asm/iseries/hv_lp_event.h>
......@@ -997,6 +997,9 @@ int __init viotap_init(void)
int ret;
struct proc_dir_entry *e;
if (!firmware_has_feature(FW_FEATURE_ISERIES))
return -ENODEV;
op_struct_list = NULL;
if ((ret = add_op_structs(VIOTAPE_MAXREQ)) < 0) {
printk(VIOTAPE_KERN_WARN "couldn't allocate op structs\n");
......
......@@ -73,7 +73,7 @@
#include <asm/abs_addr.h>
#include <asm/iseries/mf.h>
#include <asm/uaccess.h>
#include <asm/firmware.h>
#include <asm/iseries/hv_lp_config.h>
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_lp_event.h>
......@@ -1668,7 +1668,7 @@ static struct vio_driver veth_driver = {
* Module initialization/cleanup
*/
void __exit veth_module_cleanup(void)
static void __exit veth_module_cleanup(void)
{
int i;
struct veth_lpar_connection *cnx;
......@@ -1697,11 +1697,14 @@ void __exit veth_module_cleanup(void)
}
module_exit(veth_module_cleanup);
int __init veth_module_init(void)
static int __init veth_module_init(void)
{
int i;
int rc;
if (!firmware_has_feature(FW_FEATURE_ISERIES))
return -ENODEV;
this_lp = HvLpConfig_getLpIndex_outline();
for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) {
......
......@@ -161,6 +161,7 @@ struct spu_syscall_block {
extern long spu_sys_callback(struct spu_syscall_block *s);
/* syscalls implemented in spufs */
struct file;
extern struct spufs_calls {
asmlinkage long (*create_thread)(const char __user *name,
unsigned int flags, mode_t mode);
......@@ -232,6 +233,7 @@ void spu_remove_sysdev_attr_group(struct attribute_group *attrs);
* to object-id spufs file from user space and the notifer
* function can assume that spu->ctx is valid.
*/
struct notifier_block;
int spu_switch_event_register(struct notifier_block * n);
int spu_switch_event_unregister(struct notifier_block * n);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment