Skip to content

L
linux
Commit 55927684 authored by Devin Heitmueller's avatar Devin Heitmueller Committed by Mauro Carvalho Chehab
Browse files
Options

V4L/DVB (9744): em28xx: cleanup XCLK register usage 

Convert over to setting the XCLK register usage with the new em28xx_write_reg()
function.

Thanks to Ray Lu from Empia for providing the em2860/2880 datasheet.
Signed-off-by: default avatarDevin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 2f56c34b
Show whitespace changes
Inline Side-by-side
Showing with 60 additions and 15 deletions
drivers/media/video/em28xx/em28xx-cards.c
View file @ 55927684
......@@ -1396,7 +1396,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2882_BOARD_PINNACLE_HYBRID_PRO:
case EM2883_BOARD_KWORLD_HYBRID_A316:
case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
......@@ -1410,7 +1412,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
break;
case EM2882_BOARD_TERRATEC_HYBRID_XS:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
......@@ -1432,7 +1436,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2880_BOARD_KWORLD_DVB_310U:
case EM2870_BOARD_KWORLD_350U:
case EM2881_BOARD_DNT_DA2_HYBRID:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
......@@ -1451,7 +1457,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2880_BOARD_MSI_DIGIVOX_AD:
case EM2880_BOARD_MSI_DIGIVOX_AD_II:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
......@@ -1466,11 +1474,14 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2750_BOARD_UNKNOWN:
case EM2750_BOARD_DLCW_130:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x0a", 1);
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_FREQUENCY_48MHZ);
break;
case EM2861_BOARD_PLEXTOR_PX_TV100U:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
......@@ -1481,7 +1492,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2861_BOARD_KWORLD_PVRTV_300U:
case EM2880_BOARD_KWORLD_DVB_305U:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
......@@ -1493,7 +1506,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
break;
case EM2870_BOARD_KWORLD_355U:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
......@@ -1504,7 +1519,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
break;
case EM2870_BOARD_COMPRO_VIDEOMATE:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
......@@ -1525,7 +1542,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
break;
case EM2870_BOARD_TERRATEC_XS_MT2060:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
......@@ -1553,12 +1572,17 @@ void em28xx_pre_card_setup(struct em28xx *dev)
em28xx_write_regs(dev, 0x08, "\xfe", 1);
mdelay(70);
/* switch em2880 rc protocol */
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x22", 1);
/* djh - I have serious doubts this is right... */
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_10MHZ);
/* should be added ir_codes here */
break;
case EM2820_BOARD_GADMEI_UTV310:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
......@@ -1567,8 +1591,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
break;
case EM2860_BOARD_GADMEI_UTV330:
/* Turn on IR */
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
......@@ -1576,7 +1601,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
break;
case EM2820_BOARD_MSI_VOX_USB_2:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_reg(dev, EM28XX_R0F_XCLK,
EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
......
drivers/media/video/em28xx/em28xx-reg.h
View file @ 55927684
......@@ -51,6 +51,24 @@
#define EM28XX_R0E_AUDIOSRC 0x0e
#define EM28XX_R0F_XCLK 0x0f
/* em28xx XCLK Register (0x0f) */
#define EM28XX_XCLK_AUDIO_UNMUTE 0x80 /* otherwise audio muted */
#define EM28XX_XCLK_I2S_MSB_TIMING 0x40 /* otherwise standard timing */
#define EM28XX_XCLK_IR_RC5_MODE 0x20 /* otherwise NEC mode */
#define EM28XX_XCLK_IR_NEC_CHK_PARITY 0x10
#define EM28XX_XCLK_FREQUENCY_30MHZ 0x00 /* Freq. select (bits [3-0]) */
#define EM28XX_XCLK_FREQUENCY_15MHZ 0x01
#define EM28XX_XCLK_FREQUENCY_10MHZ 0x02
#define EM28XX_XCLK_FREQUENCY_7_5MHZ 0x03
#define EM28XX_XCLK_FREQUENCY_6MHZ 0x04
#define EM28XX_XCLK_FREQUENCY_5MHZ 0x05
#define EM28XX_XCLK_FREQUENCY_4_3MHZ 0x06
#define EM28XX_XCLK_FREQUENCY_12MHZ 0x07
#define EM28XX_XCLK_FREQUENCY_20MHZ 0x08
#define EM28XX_XCLK_FREQUENCY_20MHZ_2 0x09
#define EM28XX_XCLK_FREQUENCY_48MHZ 0x0a
#define EM28XX_XCLK_FREQUENCY_24MHZ 0x0b
#define EM28XX_R10_VINMODE 0x10
#define EM28XX_R11_VINCTRL 0x11
#define EM28XX_R12_VINENABLE 0x12 /* */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7