bnx2x: Support loading cnic resources at run-time

This patch replaces the BCM_CNIC define with a flag which can change at run-time
and which does not use the CONFIG_CNIC kconfig option.
For the PF/hypervisor driver cnic is always supported, however allocation of
cnic resources and configuration of the HW for offload mode is done only when
the cnic module registers bnx2x.
Signed-off-by: Merav Sicron <meravs@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

@@ -34,18 +34,10 @@
 
 #include "bnx2x_hsi.h"
 
-#if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
-#define BCM_CNIC 1
 #include "../cnic_if.h"
-#endif
 
-#ifdef BCM_CNIC
-#define BNX2X_MIN_MSIX_VEC_CNT 3
-#define BNX2X_MSIX_VEC_FP_START 2
-#else
-#define BNX2X_MIN_MSIX_VEC_CNT 2
-#define BNX2X_MSIX_VEC_FP_START 1
-#endif
+
+#define BNX2X_MIN_MSIX_VEC_CNT(bp)		((bp)->min_msix_vec_cnt)
 
 #include <linux/mdio.h>
 
@@ -256,15 +248,10 @@ enum {
 	/* FCoE L2 */
 #define	BNX2X_FCOE_ETH_CID(bp)		(BNX2X_CNIC_START_ETH_CID(bp) + 1)
 
-/** Additional rings budgeting */
-#ifdef BCM_CNIC
-#define CNIC_PRESENT			1
-#define FCOE_PRESENT			1
-#else
-#define CNIC_PRESENT			0
-#define FCOE_PRESENT			0
-#endif /* BCM_CNIC */
-#define NON_ETH_CONTEXT_USE	(FCOE_PRESENT)
+#define CNIC_SUPPORT(bp)		((bp)->cnic_support)
+#define CNIC_ENABLED(bp)		((bp)->cnic_enabled)
+#define CNIC_LOADED(bp)			((bp)->cnic_loaded)
+#define FCOE_INIT(bp)			((bp)->fcoe_init)
 
 #define AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR \
 	AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR
@@ -297,9 +284,7 @@ enum {
 	OOO_TXQ_IDX_OFFSET,
 };
 #define MAX_ETH_TXQ_IDX(bp)	(BNX2X_NUM_NON_CNIC_QUEUES(bp) * (bp)->max_cos)
-#ifdef BCM_CNIC
 #define FCOE_TXQ_IDX(bp)	(MAX_ETH_TXQ_IDX(bp) + FCOE_TXQ_IDX_OFFSET)
-#endif
 
 /* fast path */
 /*
@@ -585,15 +570,9 @@ struct bnx2x_fastpath {
 						->var)
 
 
-#define IS_ETH_FP(fp)			(fp->index < \
-					 BNX2X_NUM_ETH_QUEUES(fp->bp))
-#ifdef BCM_CNIC
-#define IS_FCOE_FP(fp)			(fp->index == FCOE_IDX(fp->bp))
+#define IS_ETH_FP(fp)		((fp)->index < BNX2X_NUM_ETH_QUEUES((fp)->bp))
+#define IS_FCOE_FP(fp)		((fp)->index == FCOE_IDX((fp)->bp))
 #define IS_FCOE_IDX(idx)	((idx) == FCOE_IDX(bp))
-#else
-#define IS_FCOE_FP(fp)		false
-#define IS_FCOE_IDX(idx)	false
-#endif
 
 
 /* MC hsi */
@@ -886,6 +865,18 @@ struct bnx2x_common {
 					 (CHIP_REV(bp) == CHIP_REV_Bx))
 #define CHIP_IS_E3A0(bp)		(CHIP_IS_E3(bp) && \
 					 (CHIP_REV(bp) == CHIP_REV_Ax))
+/* This define is used in two main places:
+ * 1. In the early stages of nic_load, to know if to configrue Parser / Searcher
+ * to nic-only mode or to offload mode. Offload mode is configured if either the
+ * chip is E1x (where MIC_MODE register is not applicable), or if cnic already
+ * registered for this port (which means that the user wants storage services).
+ * 2. During cnic-related load, to know if offload mode is already configured in
+ * the HW or needs to be configrued.
+ * Since the transition from nic-mode to offload-mode in HW causes traffic
+ * coruption, nic-mode is configured only in ports on which storage services
+ * where never requested.
+ */
+#define CONFIGURE_NIC_MODE(bp)		(!CHIP_IS_E1x(bp) && !CNIC_ENABLED(bp))
 
 	int			flash_size;
 #define BNX2X_NVRAM_1MB_SIZE			0x20000	/* 1M bit in bytes */
@@ -1003,18 +994,15 @@ union cdu_context {
 #define CDU_ILT_PAGE_SZ		(8192 << CDU_ILT_PAGE_SZ_HW) /* 32K */
 #define ILT_PAGE_CIDS		(CDU_ILT_PAGE_SZ / sizeof(union cdu_context))
 
-#ifdef BCM_CNIC
 #define CNIC_ISCSI_CID_MAX	256
 #define CNIC_FCOE_CID_MAX	2048
 #define CNIC_CID_MAX		(CNIC_ISCSI_CID_MAX + CNIC_FCOE_CID_MAX)
 #define CNIC_ILT_LINES		DIV_ROUND_UP(CNIC_CID_MAX, ILT_PAGE_CIDS)
-#endif
 
 #define QM_ILT_PAGE_SZ_HW	0
 #define QM_ILT_PAGE_SZ		(4096 << QM_ILT_PAGE_SZ_HW) /* 4K */
 #define QM_CID_ROUND		1024
 
-#ifdef BCM_CNIC
 /* TM (timers) host DB constants */
 #define TM_ILT_PAGE_SZ_HW	0
 #define TM_ILT_PAGE_SZ		(4096 << TM_ILT_PAGE_SZ_HW) /* 4K */
@@ -1032,8 +1020,6 @@ union cdu_context {
 #define SRC_T2_SZ		SRC_ILT_SZ
 #define SRC_ILT_LINES		DIV_ROUND_UP(SRC_ILT_SZ, SRC_ILT_PAGE_SZ)
 
-#endif
-
 #define MAX_DMAE_C		8
 
 /* DMA memory not used in fastpath */
@@ -1227,7 +1213,6 @@ struct bnx2x {
 	struct bnx2x_sp_objs	*sp_objs;
 	struct bnx2x_fp_stats	*fp_stats;
 	struct bnx2x_fp_txdata	*bnx2x_txq;
-	int			bnx2x_txq_size;
 	void __iomem		*regview;
 	void __iomem		*doorbells;
 	u16			db_size;
@@ -1350,6 +1335,15 @@ struct bnx2x {
 #define NO_ISCSI_OOO(bp)	((bp)->flags & NO_ISCSI_OOO_FLAG)
 #define NO_FCOE(bp)		((bp)->flags & NO_FCOE_FLAG)
 
+	u8			cnic_support;
+	bool			cnic_enabled;
+	bool			cnic_loaded;
+
+	/* Flag that indicates that we can start looking for FCoE L2 queue
+	 * completions in the default status block.
+	 */
+	bool			fcoe_init;
+
 	int			pm_cap;
 	int			mrrs;
 
@@ -1420,6 +1414,8 @@ struct bnx2x {
 #define BNX2X_MAX_COS			3
 #define BNX2X_MAX_TX_COS		2
 	int			num_queues;
+	uint			num_ethernet_queues;
+	uint			num_cnic_queues;
 	int			num_napi_queues;
 	int			disable_tpa;
 
@@ -1433,6 +1429,7 @@ struct bnx2x {
 	u8			igu_dsb_id;
 	u8			igu_base_sb;
 	u8			igu_sb_cnt;
+	u8			min_msix_vec_cnt;
 
 	dma_addr_t		def_status_blk_mapping;
 
@@ -1478,16 +1475,16 @@ struct bnx2x {
  * Maximum supported number of RSS queues: number of IGU SBs minus one that goes
  * to CNIC.
  */
-#define BNX2X_MAX_RSS_COUNT(bp)	((bp)->igu_sb_cnt - CNIC_PRESENT)
+#define BNX2X_MAX_RSS_COUNT(bp)	((bp)->igu_sb_cnt - CNIC_SUPPORT(bp))
 
 /*
  * Maximum CID count that might be required by the bnx2x:
  * Max RSS * Max_Tx_Multi_Cos + FCoE + iSCSI
  */
 #define BNX2X_L2_CID_COUNT(bp)	(BNX2X_NUM_ETH_QUEUES(bp) * BNX2X_MULTI_TX_COS \
-				+ NON_ETH_CONTEXT_USE + CNIC_PRESENT)
+				+ 2 * CNIC_SUPPORT(bp))
 #define BNX2X_L2_MAX_CID(bp)	(BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS \
-				+ NON_ETH_CONTEXT_USE + CNIC_PRESENT)
+				+ 2 * CNIC_SUPPORT(bp))
 #define L2_ILT_LINES(bp)	(DIV_ROUND_UP(BNX2X_L2_CID_COUNT(bp),\
 					ILT_PAGE_CIDS))
 
@@ -1495,9 +1492,6 @@ struct bnx2x {
 
 	int			dropless_fc;
 
-#ifdef BCM_CNIC
-	u32			cnic_flags;
-#define BNX2X_CNIC_FLAG_MAC_SET		1
 	void			*t2;
 	dma_addr_t		t2_mapping;
 	struct cnic_ops	__rcu	*cnic_ops;
@@ -1518,7 +1512,6 @@ struct bnx2x {
 
 	/* Start index of the "special" (CNIC related) L2 cleints */
 	u8				cnic_base_cl_id;
-#endif
 
 	int			dmae_ready;
 	/* used to synchronize dmae accesses */
@@ -1647,9 +1640,9 @@ struct bnx2x {
 /* Tx queues may be less or equal to Rx queues */
 extern int num_queues;
 #define BNX2X_NUM_QUEUES(bp)	(bp->num_queues)
-#define BNX2X_NUM_ETH_QUEUES(bp) (BNX2X_NUM_QUEUES(bp) - NON_ETH_CONTEXT_USE)
+#define BNX2X_NUM_ETH_QUEUES(bp) ((bp)->num_ethernet_queues)
 #define BNX2X_NUM_NON_CNIC_QUEUES(bp)	(BNX2X_NUM_QUEUES(bp) - \
-					 NON_ETH_CONTEXT_USE)
+					 (bp)->num_cnic_queues)
 #define BNX2X_NUM_RX_QUEUES(bp)	BNX2X_NUM_QUEUES(bp)
 
 #define is_multi(bp)		(BNX2X_NUM_QUEUES(bp) > 1)
@@ -1689,6 +1682,13 @@ struct bnx2x_func_init_params {
 	u16		spq_prod;	/* valid iff FUNC_FLG_SPQ */
 };
 
+#define for_each_cnic_queue(bp, var) \
+	for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \
+	     (var)++) \
+		if (skip_queue(bp, var))	\
+			continue;		\
+		else
+
 #define for_each_eth_queue(bp, var) \
 	for ((var) = 0; (var) < BNX2X_NUM_ETH_QUEUES(bp); (var)++)
 
@@ -1702,6 +1702,22 @@ struct bnx2x_func_init_params {
 		else
 
 /* Skip forwarding FP */
+#define for_each_valid_rx_queue(bp, var)			\
+	for ((var) = 0;						\
+	     (var) < (CNIC_LOADED(bp) ? BNX2X_NUM_QUEUES(bp) :	\
+		      BNX2X_NUM_ETH_QUEUES(bp));		\
+	     (var)++)						\
+		if (skip_rx_queue(bp, var))			\
+			continue;				\
+		else
+
+#define for_each_rx_queue_cnic(bp, var) \
+	for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \
+	     (var)++) \
+		if (skip_rx_queue(bp, var))	\
+			continue;		\
+		else
+
 #define for_each_rx_queue(bp, var) \
 	for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
 		if (skip_rx_queue(bp, var))	\
@@ -1709,6 +1725,22 @@ struct bnx2x_func_init_params {
 		else
 
 /* Skip OOO FP */
+#define for_each_valid_tx_queue(bp, var)			\
+	for ((var) = 0;						\
+	     (var) < (CNIC_LOADED(bp) ? BNX2X_NUM_QUEUES(bp) :	\
+		      BNX2X_NUM_ETH_QUEUES(bp));		\
+	     (var)++)						\
+		if (skip_tx_queue(bp, var))			\
+			continue;				\
+		else
+
+#define for_each_tx_queue_cnic(bp, var) \
+	for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \
+	     (var)++) \
+		if (skip_tx_queue(bp, var))	\
+			continue;		\
+		else
+
 #define for_each_tx_queue(bp, var) \
 	for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
 		if (skip_tx_queue(bp, var))	\
@@ -2179,7 +2211,6 @@ void bnx2x_notify_link_changed(struct bnx2x *bp);
 #define BNX2X_MF_SD_PROTOCOL(bp) \
 	((bp)->mf_config[BP_VN(bp)] & FUNC_MF_CFG_PROTOCOL_MASK)
 
-#ifdef BCM_CNIC
 #define BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) \
 	(BNX2X_MF_SD_PROTOCOL(bp) == FUNC_MF_CFG_PROTOCOL_ISCSI)
 
@@ -2196,9 +2227,12 @@ void bnx2x_notify_link_changed(struct bnx2x *bp);
 #define IS_MF_STORAGE_SD(bp) (IS_MF_SD(bp) && \
 				(BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) || \
 				 BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)))
-#else
-#define IS_MF_FCOE_AFEX(bp)	false
-#endif
 
+enum {
+	SWITCH_UPDATE,
+	AFEX_UPDATE,
+};
+
+#define NUM_MACS	8
 
 #endif /* bnx2x.h */

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h

@@ -238,7 +238,6 @@ irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance);
  * @dev_instance:	private instance
  */
 irqreturn_t bnx2x_interrupt(int irq, void *dev_instance);
-#ifdef BCM_CNIC
 
 /**
  * bnx2x_cnic_notify - send command to cnic driver
@@ -262,8 +261,6 @@ void bnx2x_setup_cnic_irq_info(struct bnx2x *bp);
  */
 void bnx2x_setup_cnic_info(struct bnx2x *bp);
 
-#endif
-
 /**
  * bnx2x_int_enable - enable HW interrupts.
  *
@@ -283,7 +280,7 @@ void bnx2x_int_enable(struct bnx2x *bp);
 void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw);
 
 /**
- * bnx2x_nic_init - init driver internals.
+ * bnx2x_nic_init_cnic - init driver internals for cnic.
  *
  * @bp:		driver handle
  * @load_code:	COMMON, PORT or FUNCTION
@@ -293,8 +290,25 @@ void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw);
  *  - status blocks
  *  - etc.
  */
-void bnx2x_nic_init(struct bnx2x *bp, u32 load_code);
+void bnx2x_nic_init_cnic(struct bnx2x *bp);
 
+/**
+ * bnx2x_nic_init - init driver internals.
+ *
+ * @bp:		driver handle
+ *
+ * Initializes:
+ *  - rings
+ *  - status blocks
+ *  - etc.
+ */
+void bnx2x_nic_init(struct bnx2x *bp, u32 load_code);
+/**
+ * bnx2x_alloc_mem_cnic - allocate driver's memory for cnic.
+ *
+ * @bp:		driver handle
+ */
+int bnx2x_alloc_mem_cnic(struct bnx2x *bp);
 /**
  * bnx2x_alloc_mem - allocate driver's memory.
  *
@@ -302,6 +316,12 @@ void bnx2x_nic_init(struct bnx2x *bp, u32 load_code);
  */
 int bnx2x_alloc_mem(struct bnx2x *bp);
 
+/**
+ * bnx2x_free_mem_cnic - release driver's memory for cnic.
+ *
+ * @bp:		driver handle
+ */
+void bnx2x_free_mem_cnic(struct bnx2x *bp);
 /**
  * bnx2x_free_mem - release driver's memory.
  *
@@ -407,6 +427,7 @@ bool bnx2x_reset_is_done(struct bnx2x *bp, int engine);
 void bnx2x_set_reset_in_progress(struct bnx2x *bp);
 void bnx2x_set_reset_global(struct bnx2x *bp);
 void bnx2x_disable_close_the_gate(struct bnx2x *bp);
+int bnx2x_init_hw_func_cnic(struct bnx2x *bp);
 
 /**
  * bnx2x_sp_event - handle ramrods completion.
@@ -423,6 +444,14 @@ void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe);
  */
 void bnx2x_ilt_set_info(struct bnx2x *bp);
 
+/**
+ * bnx2x_ilt_set_cnic_info - prepare ILT configurations for SRC
+ * and TM.
+ *
+ * @bp:		driver handle
+ */
+void bnx2x_ilt_set_info_cnic(struct bnx2x *bp);
+
 /**
  * bnx2x_dcbx_init - initialize dcbx protocol.
  *
@@ -491,12 +520,17 @@ int bnx2x_resume(struct pci_dev *pdev);
 /* Release IRQ vectors */
 void bnx2x_free_irq(struct bnx2x *bp);
 
+void bnx2x_free_fp_mem_cnic(struct bnx2x *bp);
 void bnx2x_free_fp_mem(struct bnx2x *bp);
+int bnx2x_alloc_fp_mem_cnic(struct bnx2x *bp);
 int bnx2x_alloc_fp_mem(struct bnx2x *bp);
 void bnx2x_init_rx_rings(struct bnx2x *bp);
+void bnx2x_init_rx_rings_cnic(struct bnx2x *bp);
+void bnx2x_free_skbs_cnic(struct bnx2x *bp);
 void bnx2x_free_skbs(struct bnx2x *bp);
 void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw);
 void bnx2x_netif_start(struct bnx2x *bp);
+int bnx2x_load_cnic(struct bnx2x *bp);
 
 /**
  * bnx2x_enable_msix - set msix configuration.
@@ -547,7 +581,7 @@ void bnx2x_free_mem_bp(struct bnx2x *bp);
  */
 int bnx2x_change_mtu(struct net_device *dev, int new_mtu);
 
-#if defined(NETDEV_FCOE_WWNN) && defined(BCM_CNIC)
+#ifdef NETDEV_FCOE_WWNN
 /**
  * bnx2x_fcoe_get_wwn - return the requested WWN value for this port
  *
@@ -793,23 +827,39 @@ static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
 	sge->addr_lo = 0;
 }
 
-static inline void bnx2x_add_all_napi(struct bnx2x *bp)
+static inline void bnx2x_add_all_napi_cnic(struct bnx2x *bp)
 {
 	int i;
 
-	bp->num_napi_queues = bp->num_queues;
+	/* Add NAPI objects */
+	for_each_rx_queue_cnic(bp, i)
+		netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
+			       bnx2x_poll, BNX2X_NAPI_WEIGHT);
+}
+
+static inline void bnx2x_add_all_napi(struct bnx2x *bp)
+{
+	int i;
 
 	/* Add NAPI objects */
-	for_each_rx_queue(bp, i)
+	for_each_eth_queue(bp, i)
 		netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
 			       bnx2x_poll, BNX2X_NAPI_WEIGHT);
 }
 
+static inline void bnx2x_del_all_napi_cnic(struct bnx2x *bp)
+{
+	int i;
+
+	for_each_rx_queue_cnic(bp, i)
+		netif_napi_del(&bnx2x_fp(bp, i, napi));
+}
+
 static inline void bnx2x_del_all_napi(struct bnx2x *bp)
 {
 	int i;
 
-	for_each_rx_queue(bp, i)
+	for_each_eth_queue(bp, i)
 		netif_napi_del(&bnx2x_fp(bp, i, napi));
 }
 
@@ -979,11 +1029,9 @@ static inline u8 bnx2x_stats_id(struct bnx2x_fastpath *fp)
 {
 	struct bnx2x *bp = fp->bp;
 	if (!CHIP_IS_E1x(bp)) {
-#ifdef BCM_CNIC
 		/* there are special statistics counters for FCoE 136..140 */
 		if (IS_FCOE_FP(fp))
 			return bp->cnic_base_cl_id + (bp->pf_num >> 1);
-#endif
 		return fp->cl_id;
 	}
 	return fp->cl_id + BP_PORT(bp) * FP_SB_MAX_E1x;
@@ -1102,7 +1150,6 @@ static inline void bnx2x_init_txdata(struct bnx2x *bp,
 	   txdata->cid, txdata->txq_index);
 }
 
-#ifdef BCM_CNIC
 static inline u8 bnx2x_cnic_eth_cl_id(struct bnx2x *bp, u8 cl_idx)
 {
 	return bp->cnic_base_cl_id + cl_idx +
@@ -1162,7 +1209,6 @@ static inline void bnx2x_init_fcoe_fp(struct bnx2x *bp)
 	   fp->index, bp, fp->status_blk.e2_sb, fp->cl_id, fp->fw_sb_id,
 	   fp->igu_sb_id);
 }
-#endif
 
 static inline int bnx2x_clean_tx_queue(struct bnx2x *bp,
 				       struct bnx2x_fp_txdata *txdata)
@@ -1280,7 +1326,7 @@ static inline bool bnx2x_mtu_allows_gro(int mtu)
 	 */
 	return mtu <= SGE_PAGE_SIZE && (U_ETH_SGL_SIZE * fpp) <= MAX_SKB_FRAGS;
 }
-#ifdef BCM_CNIC
+
 /**
  * bnx2x_get_iscsi_info - update iSCSI params according to licensing info.
  *
@@ -1288,7 +1334,6 @@ static inline bool bnx2x_mtu_allows_gro(int mtu)
  *
  */
 void bnx2x_get_iscsi_info(struct bnx2x *bp);
-#endif
 
 /**
  * bnx2x_link_sync_notify - send notification to other functions.
@@ -1340,13 +1385,11 @@ static inline void bnx2x_update_drv_flags(struct bnx2x *bp, u32 flags, u32 set)
 
 static inline bool bnx2x_is_valid_ether_addr(struct bnx2x *bp, u8 *addr)
 {
-	if (is_valid_ether_addr(addr))
+	if (is_valid_ether_addr(addr) ||
+	    (is_zero_ether_addr(addr) &&
+	     (IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp))))
 		return true;
-#ifdef BCM_CNIC
-	if (is_zero_ether_addr(addr) &&
-	    (IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp)))
-		return true;
-#endif
+
 	return false;
 }
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c

@@ -1908,10 +1908,10 @@ static void bnx2x_dcbnl_get_perm_hw_addr(struct net_device *netdev,
 	/* first the HW mac address */
 	memcpy(perm_addr, netdev->dev_addr, netdev->addr_len);
 
-#ifdef BCM_CNIC
+	if (CNIC_LOADED(bp))
 		/* second SAN address */
-	memcpy(perm_addr+netdev->addr_len, bp->fip_mac, netdev->addr_len);
-#endif
+		memcpy(perm_addr+netdev->addr_len, bp->fip_mac,
+		       netdev->addr_len);
 }
 
 static void bnx2x_dcbnl_set_pg_tccfg_tx(struct net_device *netdev, int prio,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c

@@ -2901,7 +2901,9 @@ static void bnx2x_get_channels(struct net_device *dev,
 static void bnx2x_change_num_queues(struct bnx2x *bp, int num_rss)
 {
 	bnx2x_disable_msi(bp);
-	BNX2X_NUM_QUEUES(bp) = num_rss + NON_ETH_CONTEXT_USE;
+	bp->num_ethernet_queues = num_rss;
+	bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
+	BNX2X_DEV_INFO("set number of queues to %d\n", bp->num_queues);
 	bnx2x_set_int_mode(bp);
 }
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h

@@ -648,15 +648,25 @@ static int bnx2x_ilt_client_mem_op(struct bnx2x *bp, int cli_num,
 	return rc;
 }
 
+static int bnx2x_ilt_mem_op_cnic(struct bnx2x *bp, u8 memop)
+{
+	int rc = 0;
+
+	if (CONFIGURE_NIC_MODE(bp))
+		rc = bnx2x_ilt_client_mem_op(bp, ILT_CLIENT_SRC, memop);
+	if (!rc)
+		rc = bnx2x_ilt_client_mem_op(bp, ILT_CLIENT_TM, memop);
+
+	return rc;
+}
+
 static int bnx2x_ilt_mem_op(struct bnx2x *bp, u8 memop)
 {
 	int rc = bnx2x_ilt_client_mem_op(bp, ILT_CLIENT_CDU, memop);
 	if (!rc)
 		rc = bnx2x_ilt_client_mem_op(bp, ILT_CLIENT_QM, memop);
-	if (!rc)
+	if (!rc && CNIC_SUPPORT(bp) && !CONFIGURE_NIC_MODE(bp))
 		rc = bnx2x_ilt_client_mem_op(bp, ILT_CLIENT_SRC, memop);
-	if (!rc)
-		rc = bnx2x_ilt_client_mem_op(bp, ILT_CLIENT_TM, memop);
 
 	return rc;
 }
@@ -781,12 +791,19 @@ static void bnx2x_ilt_client_id_init_op(struct bnx2x *bp,
 	bnx2x_ilt_client_init_op(bp, ilt_cli, initop);
 }
 
+static void bnx2x_ilt_init_op_cnic(struct bnx2x *bp, u8 initop)
+{
+	if (CONFIGURE_NIC_MODE(bp))
+		bnx2x_ilt_client_id_init_op(bp, ILT_CLIENT_SRC, initop);
+	bnx2x_ilt_client_id_init_op(bp, ILT_CLIENT_TM, initop);
+}
+
 static void bnx2x_ilt_init_op(struct bnx2x *bp, u8 initop)
 {
 	bnx2x_ilt_client_id_init_op(bp, ILT_CLIENT_CDU, initop);
 	bnx2x_ilt_client_id_init_op(bp, ILT_CLIENT_QM, initop);
+	if (CNIC_SUPPORT(bp) && !CONFIGURE_NIC_MODE(bp))
 		bnx2x_ilt_client_id_init_op(bp, ILT_CLIENT_SRC, initop);
-	bnx2x_ilt_client_id_init_op(bp, ILT_CLIENT_TM, initop);
 }
 
 static void bnx2x_ilt_init_client_psz(struct bnx2x *bp, int cli_num,
@@ -890,7 +907,6 @@ static void bnx2x_qm_init_ptr_table(struct bnx2x *bp, int qm_cid_count,
 /****************************************************************************
 * SRC initializations
 ****************************************************************************/
-#ifdef BCM_CNIC
 /* called during init func stage */
 static void bnx2x_src_init_t2(struct bnx2x *bp, struct src_ent *t2,
 			      dma_addr_t t2_mapping, int src_cid_count)
@@ -915,5 +931,4 @@ static void bnx2x_src_init_t2(struct bnx2x *bp, struct src_ent *t2,
 		    U64_HI((u64)t2_mapping +
 			   (src_cid_count-1) * sizeof(struct src_ent)));
 }
-#endif
 #endif /* BNX2X_INIT_OPS_H */

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

@@ -11998,7 +11998,7 @@ void bnx2x_init_xgxs_loopback(struct link_params *params,
 	bnx2x_set_led(params, vars, LED_MODE_OPER, vars->line_speed);
 }
 
-static void bnx2x_set_rx_filter(struct link_params *params, u8 en)
+void bnx2x_set_rx_filter(struct link_params *params, u8 en)
 {
 	struct bnx2x *bp = params->bp;
 	u8 val = en * 0x1F;

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h

@@ -432,7 +432,8 @@ int bnx2x_phy_probe(struct link_params *params);
 u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, u32 shmem_base,
 			     u32 shmem2_base, u8 port);
 
-
+/* Open / close the gate between the NIG and the BRB */
+void bnx2x_set_rx_filter(struct link_params *params, u8 en);
 
 /* DCBX structs */
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h

@@ -2107,6 +2107,7 @@
 #define NIG_REG_LLH1_ERROR_MASK 				 0x10090
 /* [RW 8] event id for llh1 */
 #define NIG_REG_LLH1_EVENT_ID					 0x10088
+#define NIG_REG_LLH1_FUNC_EN					 0x16104
 #define NIG_REG_LLH1_FUNC_MEM					 0x161c0
 #define NIG_REG_LLH1_FUNC_MEM_ENABLE				 0x16160
 #define NIG_REG_LLH1_FUNC_MEM_SIZE				 16
@@ -2302,6 +2303,15 @@
  * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
  * accommodate the 9 input clients to ETS arbiter. */
 #define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB			 0x18684
+/* [RW 1] MCP-to-host path enable. Set this bit to enable the routing of MCP
+ * packets to BRB LB interface to forward the packet to the host. All
+ * packets from MCP are forwarded to the network when this bit is cleared -
+ * regardless of the configured destination in tx_mng_destination register.
+ * When MCP-to-host paths for both ports 0 and 1 are disabled - the arbiter
+ * for BRB LB interface is bypassed and PBF LB traffic is always selected to
+ * send to BRB LB.
+ */
+#define NIG_REG_P0_TX_MNG_HOST_ENABLE				 0x182f4
 #define NIG_REG_P1_HWPFC_ENABLE					 0x181d0
 #define NIG_REG_P1_MAC_IN_EN					 0x185c0
 /* [RW 1] Output enable for TX MAC interface */
@@ -2418,6 +2428,12 @@
 #define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB			 0x186e4
 /* [R 1] TX FIFO for transmitting data to MAC is empty. */
 #define NIG_REG_P1_TX_MACFIFO_EMPTY				 0x18594
+/* [RW 1] MCP-to-host path enable. Set this bit to enable the routing of MCP
+ * packets to BRB LB interface to forward the packet to the host. All
+ * packets from MCP are forwarded to the network when this bit is cleared -
+ * regardless of the configured destination in tx_mng_destination register.
+ */
+#define NIG_REG_P1_TX_MNG_HOST_ENABLE				 0x182f8
 /* [R 1] FIFO empty status of the MCP TX FIFO used for storing MCP packets
    forwarded to the host. */
 #define NIG_REG_P1_TX_MNG_HOST_FIFO_EMPTY			 0x182b8

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c

@@ -5350,12 +5350,24 @@ static int bnx2x_func_chk_transition(struct bnx2x *bp,
 		else if ((cmd == BNX2X_F_CMD_AFEX_VIFLISTS) &&
 			 (!test_bit(BNX2X_F_CMD_STOP, &o->pending)))
 			next_state = BNX2X_F_STATE_STARTED;
+
+		/* Switch_update ramrod can be sent in either started or
+		 * tx_stopped state, and it doesn't change the state.
+		 */
+		else if ((cmd == BNX2X_F_CMD_SWITCH_UPDATE) &&
+			 (!test_bit(BNX2X_F_CMD_STOP, &o->pending)))
+			next_state = BNX2X_F_STATE_STARTED;
+
 		else if (cmd == BNX2X_F_CMD_TX_STOP)
 			next_state = BNX2X_F_STATE_TX_STOPPED;
 
 		break;
 	case BNX2X_F_STATE_TX_STOPPED:
-		if (cmd == BNX2X_F_CMD_TX_START)
+		if ((cmd == BNX2X_F_CMD_SWITCH_UPDATE) &&
+		    (!test_bit(BNX2X_F_CMD_STOP, &o->pending)))
+			next_state = BNX2X_F_STATE_TX_STOPPED;
+
+		else if (cmd == BNX2X_F_CMD_TX_START)
 			next_state = BNX2X_F_STATE_STARTED;
 
 		break;
@@ -5637,6 +5649,28 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp,
 			     U64_LO(data_mapping), NONE_CONNECTION_TYPE);
 }
 
+static inline int bnx2x_func_send_switch_update(struct bnx2x *bp,
+					struct bnx2x_func_state_params *params)
+{
+	struct bnx2x_func_sp_obj *o = params->f_obj;
+	struct function_update_data *rdata =
+		(struct function_update_data *)o->rdata;
+	dma_addr_t data_mapping = o->rdata_mapping;
+	struct bnx2x_func_switch_update_params *switch_update_params =
+		&params->params.switch_update;
+
+	memset(rdata, 0, sizeof(*rdata));
+
+	/* Fill the ramrod data with provided parameters */
+	rdata->tx_switch_suspend_change_flg = 1;
+	rdata->tx_switch_suspend = switch_update_params->suspend;
+	rdata->echo = SWITCH_UPDATE;
+
+	return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_FUNCTION_UPDATE, 0,
+			     U64_HI(data_mapping),
+			     U64_LO(data_mapping), NONE_CONNECTION_TYPE);
+}
+
 static inline int bnx2x_func_send_afex_update(struct bnx2x *bp,
 					 struct bnx2x_func_state_params *params)
 {
@@ -5657,6 +5691,7 @@ static inline int bnx2x_func_send_afex_update(struct bnx2x *bp,
 		cpu_to_le16(afex_update_params->afex_default_vlan);
 	rdata->allowed_priorities_change_flg = 1;
 	rdata->allowed_priorities = afex_update_params->allowed_priorities;
+	rdata->echo = AFEX_UPDATE;
 
 	/*  No need for an explicit memory barrier here as long we would
 	 *  need to ensure the ordering of writing to the SPQ element
@@ -5773,6 +5808,8 @@ static int bnx2x_func_send_cmd(struct bnx2x *bp,
 		return bnx2x_func_send_tx_stop(bp, params);
 	case BNX2X_F_CMD_TX_START:
 		return bnx2x_func_send_tx_start(bp, params);
+	case BNX2X_F_CMD_SWITCH_UPDATE:
+		return bnx2x_func_send_switch_update(bp, params);
 	default:
 		BNX2X_ERR("Unknown command: %d\n", params->cmd);
 		return -EINVAL;
@@ -5818,16 +5855,30 @@ int bnx2x_func_state_change(struct bnx2x *bp,
 			    struct bnx2x_func_state_params *params)
 {
 	struct bnx2x_func_sp_obj *o = params->f_obj;
-	int rc;
+	int rc, cnt = 300;
 	enum bnx2x_func_cmd cmd = params->cmd;
 	unsigned long *pending = &o->pending;
 
 	mutex_lock(&o->one_pending_mutex);
 
 	/* Check that the requested transition is legal */
-	if (o->check_transition(bp, o, params)) {
+	rc = o->check_transition(bp, o, params);
+	if ((rc == -EBUSY) &&
+	    (test_bit(RAMROD_RETRY, &params->ramrod_flags))) {
+		while ((rc == -EBUSY) && (--cnt > 0)) {
 			mutex_unlock(&o->one_pending_mutex);
-		return -EINVAL;
+			msleep(10);
+			mutex_lock(&o->one_pending_mutex);
+			rc = o->check_transition(bp, o, params);
+		}
+		if (rc == -EBUSY) {
+			mutex_unlock(&o->one_pending_mutex);
+			BNX2X_ERR("timeout waiting for previous ramrod completion\n");
+			return rc;
+		}
+	} else if (rc) {
+		mutex_unlock(&o->one_pending_mutex);
+		return rc;
 	}
 
 	/* Set "pending" bit */

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h

@@ -40,6 +40,12 @@ enum {
 	 * pending commands list.
 	 */
 	RAMROD_CONT,
+	/* If there is another pending ramrod, wait until it finishes and
+	 * re-try to submit this one. This flag can be set only in sleepable
+	 * context, and should not be set from the context that completes the
+	 * ramrods as deadlock will occur.
+	 */
+	RAMROD_RETRY,
 };
 
 typedef enum {
@@ -1061,6 +1067,7 @@ enum bnx2x_func_cmd {
 	BNX2X_F_CMD_AFEX_VIFLISTS,
 	BNX2X_F_CMD_TX_STOP,
 	BNX2X_F_CMD_TX_START,
+	BNX2X_F_CMD_SWITCH_UPDATE,
 	BNX2X_F_CMD_MAX,
 };
 
@@ -1103,6 +1110,10 @@ struct bnx2x_func_start_params {
 	u8 network_cos_mode;
 };
 
+struct bnx2x_func_switch_update_params {
+	u8 suspend;
+};
+
 struct bnx2x_func_afex_update_params {
 	u16 vif_id;
 	u16 afex_default_vlan;
@@ -1136,6 +1147,7 @@ struct bnx2x_func_state_params {
 		struct bnx2x_func_hw_init_params hw_init;
 		struct bnx2x_func_hw_reset_params hw_reset;
 		struct bnx2x_func_start_params start;
+		struct bnx2x_func_switch_update_params switch_update;
 		struct bnx2x_func_afex_update_params afex_update;
 		struct bnx2x_func_afex_viflists_params afex_viflists;
 		struct bnx2x_func_tx_start_params tx_start;