drm/i915: More assorted dev_priv cleanups

A small selection of macros which can only accept dev_priv from
now on and a resulting trickle of fixups.

v2: Keep original order. (Ville Syrjala)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>

drivers/gpu/drm/i915/i915_drv.h

@@ -2577,24 +2577,24 @@ struct drm_i915_cmd_table {
 #define HAS_128_BYTE_Y_TILING(dev_priv) (!IS_GEN2(dev_priv) && \
 					 !(IS_I915G(dev_priv) || \
 					 IS_I915GM(dev_priv)))
-#define SUPPORTS_TV(dev)		(INTEL_INFO(dev)->supports_tv)
-#define I915_HAS_HOTPLUG(dev)		 (INTEL_INFO(dev)->has_hotplug)
+#define SUPPORTS_TV(dev_priv)		((dev_priv)->info.supports_tv)
+#define I915_HAS_HOTPLUG(dev_priv)	((dev_priv)->info.has_hotplug)
 
 #define HAS_FW_BLC(dev_priv) 	(INTEL_GEN(dev_priv) > 2)
-#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr)
-#define HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc)
+#define HAS_PIPE_CXSR(dev_priv) ((dev_priv)->info.has_pipe_cxsr)
+#define HAS_FBC(dev_priv)	((dev_priv)->info.has_fbc)
 
 #define HAS_IPS(dev_priv)	(IS_HSW_ULT(dev_priv) || IS_BROADWELL(dev_priv))
 
-#define HAS_DP_MST(dev)	(INTEL_INFO(dev)->has_dp_mst)
+#define HAS_DP_MST(dev_priv)	((dev_priv)->info.has_dp_mst)
 
 #define HAS_DDI(dev_priv)		 ((dev_priv)->info.has_ddi)
-#define HAS_FPGA_DBG_UNCLAIMED(dev)	(INTEL_INFO(dev)->has_fpga_dbg)
-#define HAS_PSR(dev)		(INTEL_INFO(dev)->has_psr)
-#define HAS_RC6(dev)		(INTEL_INFO(dev)->has_rc6)
-#define HAS_RC6p(dev)		(INTEL_INFO(dev)->has_rc6p)
+#define HAS_FPGA_DBG_UNCLAIMED(dev_priv) ((dev_priv)->info.has_fpga_dbg)
+#define HAS_PSR(dev_priv)		 ((dev_priv)->info.has_psr)
+#define HAS_RC6(dev_priv)		 ((dev_priv)->info.has_rc6)
+#define HAS_RC6p(dev_priv)		 ((dev_priv)->info.has_rc6p)
 
-#define HAS_CSR(dev)	(INTEL_INFO(dev)->has_csr)
+#define HAS_CSR(dev_priv)	((dev_priv)->info.has_csr)
 
 #define HAS_RUNTIME_PM(dev_priv) ((dev_priv)->info.has_runtime_pm)
 #define HAS_64BIT_RELOC(dev_priv) ((dev_priv)->info.has_64bit_reloc)

drivers/gpu/drm/i915/i915_gpu_error.c

@@ -573,7 +573,7 @@ int i915_error_state_to_str(struct drm_i915_error_state_buf *m,
 		   pdev->subsystem_device);
 	err_printf(m, "IOMMU enabled?: %d\n", error->iommu);
 
-	if (HAS_CSR(dev)) {
+	if (HAS_CSR(dev_priv)) {
 		struct intel_csr *csr = &dev_priv->csr;
 
 		err_printf(m, "DMC loaded: %s\n",

drivers/gpu/drm/i915/i915_irq.c

@@ -3678,7 +3678,7 @@ static void i915_irq_preinstall(struct drm_device * dev)
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	int pipe;
 
-	if (I915_HAS_HOTPLUG(dev)) {
+	if (I915_HAS_HOTPLUG(dev_priv)) {
 		i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0);
 		I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
 	}
@@ -3712,7 +3712,7 @@ static int i915_irq_postinstall(struct drm_device *dev)
 		I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
 		I915_USER_INTERRUPT;
 
-	if (I915_HAS_HOTPLUG(dev)) {
+	if (I915_HAS_HOTPLUG(dev_priv)) {
 		i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0);
 		POSTING_READ(PORT_HOTPLUG_EN);
 
@@ -3880,7 +3880,7 @@ static void i915_irq_uninstall(struct drm_device * dev)
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	int pipe;
 
-	if (I915_HAS_HOTPLUG(dev)) {
+	if (I915_HAS_HOTPLUG(dev_priv)) {
 		i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0);
 		I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
 	}

drivers/gpu/drm/i915/intel_crt.c

@@ -693,7 +693,7 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 	power_domain = intel_display_port_power_domain(intel_encoder);
 	intel_display_power_get(dev_priv, power_domain);
 
-	if (I915_HAS_HOTPLUG(dev)) {
+	if (I915_HAS_HOTPLUG(dev_priv)) {
 		/* We can not rely on the HPD pin always being correctly wired
 		 * up, for example many KVM do not pass it through, and so
 		 * only trust an assertion that the monitor is connected.
@@ -715,7 +715,7 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 	 * broken monitor (without edid) to work behind a broken kvm (that fails
 	 * to have the right resistors for HP detection) needs to fix this up.
 	 * For now just bail out. */
-	if (I915_HAS_HOTPLUG(dev) && !i915.load_detect_test) {
+	if (I915_HAS_HOTPLUG(dev_priv) && !i915.load_detect_test) {
 		status = connector_status_disconnected;
 		goto out;
 	}
@@ -915,7 +915,7 @@ void intel_crt_init(struct drm_device *dev)
 		crt->base.disable = intel_disable_crt;
 	}
 	crt->base.enable = intel_enable_crt;
-	if (I915_HAS_HOTPLUG(dev) &&
+	if (I915_HAS_HOTPLUG(dev_priv) &&
 	    !dmi_check_system(intel_spurious_crt_detect))
 		crt->base.hpd_pin = HPD_CRT;
 	if (HAS_DDI(dev_priv)) {
@@ -932,7 +932,7 @@ void intel_crt_init(struct drm_device *dev)
 
 	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
-	if (!I915_HAS_HOTPLUG(dev))
+	if (!I915_HAS_HOTPLUG(dev_priv))
 		intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 
 	/*

drivers/gpu/drm/i915/intel_display.c

@@ -8440,7 +8440,7 @@ static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
 		}
 	}
 
-	if (HAS_PIPE_CXSR(dev)) {
+	if (HAS_PIPE_CXSR(dev_priv)) {
 		if (intel_crtc->lowfreq_avail) {
 			DRM_DEBUG_KMS("enabling CxSR downclocking\n");
 			pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
@@ -15652,7 +15652,7 @@ static void intel_setup_outputs(struct drm_device *dev)
 	} else if (IS_GEN2(dev_priv))
 		intel_dvo_init(dev);
 
-	if (SUPPORTS_TV(dev))
+	if (SUPPORTS_TV(dev_priv))
 		intel_tv_init(dev);
 
 	intel_psr_init(dev);

drivers/gpu/drm/i915/intel_dp.c

@@ -5743,7 +5743,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	}
 
 	/* init MST on ports that can support it */
-	if (HAS_DP_MST(dev) && !is_edp(intel_dp) &&
+	if (HAS_DP_MST(dev_priv) && !is_edp(intel_dp) &&
 	    (port == PORT_B || port == PORT_C || port == PORT_D))
 		intel_dp_mst_encoder_init(intel_dig_port,
 					  intel_connector->base.base.id);

drivers/gpu/drm/i915/intel_hotplug.c

@@ -501,7 +501,7 @@ static void i915_hpd_poll_init_work(struct work_struct *work)
 		if (intel_connector->mst_port)
 			continue;
 
-		if (!connector->polled && I915_HAS_HOTPLUG(dev) &&
+		if (!connector->polled && I915_HAS_HOTPLUG(dev_priv) &&
 		    intel_connector->encoder->hpd_pin > HPD_NONE) {
 			connector->polled = enabled ?
 				DRM_CONNECTOR_POLL_CONNECT |

drivers/gpu/drm/i915/intel_psr.c

@@ -427,7 +427,7 @@ void intel_psr_enable(struct intel_dp *intel_dp)
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
 
-	if (!HAS_PSR(dev)) {
+	if (!HAS_PSR(dev_priv)) {
 		DRM_DEBUG_KMS("PSR not supported on this platform\n");
 		return;
 	}