Commit 56ca9040 authored by Pavel Pisa's avatar Pavel Pisa Committed by Russell King

[ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1

Patch from Pavel Pisa

This patch adds support of i.MX/MX1 SD/MMC controller.
It has been significantly redesigned from the original Sascha Hauer's
version to support scatter-gather DMA, to conform to latest Pierre Ossman's
and Russell King's MMC-SD Linux 2.6.x infrastructure.
The handling of all events has been moved to the softirq context
and is designed with no busy-looping in mind. Unfortunately
some controller bugs has to be overcome by limited looping
about 2-20 usec but these are observed only for initial card
recognition phase.

There are still some missing/missed IRQs problems under heavy load.
Help of somebody with access to the full SDHC design information
is probably necessary.

Regenerated against 2.6.16-git-060402 to solve clash with other patches.
Signed-off-by: default avatarPavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 65dbf343
...@@ -33,6 +33,7 @@ ...@@ -33,6 +33,7 @@
#include <asm/arch/imx-regs.h> #include <asm/arch/imx-regs.h>
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/arch/mmc.h>
void imx_gpio_mode(int gpio_mode) void imx_gpio_mode(int gpio_mode)
{ {
...@@ -175,13 +176,25 @@ static struct resource imx_mmc_resources[] = { ...@@ -175,13 +176,25 @@ static struct resource imx_mmc_resources[] = {
}, },
}; };
static u64 imxmmmc_dmamask = 0xffffffffUL;
static struct platform_device imx_mmc_device = { static struct platform_device imx_mmc_device = {
.name = "imx-mmc", .name = "imx-mmc",
.id = 0, .id = 0,
.dev = {
.dma_mask = &imxmmmc_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(imx_mmc_resources), .num_resources = ARRAY_SIZE(imx_mmc_resources),
.resource = imx_mmc_resources, .resource = imx_mmc_resources,
}; };
void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
{
imx_mmc_device.dev.platform_data = info;
}
EXPORT_SYMBOL(imx_set_mmc_info);
static struct resource imx_uart1_resources[] = { static struct resource imx_uart1_resources[] = {
[0] = { [0] = {
.start = 0x00206000, .start = 0x00206000,
......
...@@ -99,4 +99,14 @@ config MMC_AT91RM9200 ...@@ -99,4 +99,14 @@ config MMC_AT91RM9200
If unsure, say N. If unsure, say N.
config MMC_IMX
tristate "Motorola i.MX Multimedia Card Interface support"
depends on ARCH_IMX && MMC
help
This selects the Motorola i.MX Multimedia card Interface.
If you have a i.MX platform with a Multimedia Card slot,
say Y or M here.
If unsure, say N.
endmenu endmenu
...@@ -17,6 +17,7 @@ obj-$(CONFIG_MMC_BLOCK) += mmc_block.o ...@@ -17,6 +17,7 @@ obj-$(CONFIG_MMC_BLOCK) += mmc_block.o
# #
obj-$(CONFIG_MMC_ARMMMCI) += mmci.o obj-$(CONFIG_MMC_ARMMMCI) += mmci.o
obj-$(CONFIG_MMC_PXA) += pxamci.o obj-$(CONFIG_MMC_PXA) += pxamci.o
obj-$(CONFIG_MMC_IMX) += imxmmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
......
This diff is collapsed.
# define __REG16(x) (*((volatile u16 *)IO_ADDRESS(x)))
#define MMC_STR_STP_CLK __REG16(IMX_MMC_BASE + 0x00)
#define MMC_STATUS __REG16(IMX_MMC_BASE + 0x04)
#define MMC_CLK_RATE __REG16(IMX_MMC_BASE + 0x08)
#define MMC_CMD_DAT_CONT __REG16(IMX_MMC_BASE + 0x0C)
#define MMC_RES_TO __REG16(IMX_MMC_BASE + 0x10)
#define MMC_READ_TO __REG16(IMX_MMC_BASE + 0x14)
#define MMC_BLK_LEN __REG16(IMX_MMC_BASE + 0x18)
#define MMC_NOB __REG16(IMX_MMC_BASE + 0x1C)
#define MMC_REV_NO __REG16(IMX_MMC_BASE + 0x20)
#define MMC_INT_MASK __REG16(IMX_MMC_BASE + 0x24)
#define MMC_CMD __REG16(IMX_MMC_BASE + 0x28)
#define MMC_ARGH __REG16(IMX_MMC_BASE + 0x2C)
#define MMC_ARGL __REG16(IMX_MMC_BASE + 0x30)
#define MMC_RES_FIFO __REG16(IMX_MMC_BASE + 0x34)
#define MMC_BUFFER_ACCESS __REG16(IMX_MMC_BASE + 0x38)
#define MMC_BUFFER_ACCESS_OFS 0x38
#define STR_STP_CLK_ENDIAN (1<<5)
#define STR_STP_CLK_RESET (1<<3)
#define STR_STP_CLK_ENABLE (1<<2)
#define STR_STP_CLK_START_CLK (1<<1)
#define STR_STP_CLK_STOP_CLK (1<<0)
#define STATUS_CARD_PRESENCE (1<<15)
#define STATUS_SDIO_INT_ACTIVE (1<<14)
#define STATUS_END_CMD_RESP (1<<13)
#define STATUS_WRITE_OP_DONE (1<<12)
#define STATUS_DATA_TRANS_DONE (1<<11)
#define STATUS_WR_CRC_ERROR_CODE_MASK (3<<10)
#define STATUS_CARD_BUS_CLK_RUN (1<<8)
#define STATUS_APPL_BUFF_FF (1<<7)
#define STATUS_APPL_BUFF_FE (1<<6)
#define STATUS_RESP_CRC_ERR (1<<5)
#define STATUS_CRC_READ_ERR (1<<3)
#define STATUS_CRC_WRITE_ERR (1<<2)
#define STATUS_TIME_OUT_RESP (1<<1)
#define STATUS_TIME_OUT_READ (1<<0)
#define STATUS_ERR_MASK 0x2f
#define CLK_RATE_PRESCALER(x) ((x) & 0x7)
#define CLK_RATE_CLK_RATE(x) (((x) & 0x7) << 3)
#define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1<<12)
#define CMD_DAT_CONT_STOP_READWAIT (1<<11)
#define CMD_DAT_CONT_START_READWAIT (1<<10)
#define CMD_DAT_CONT_BUS_WIDTH_1 (0<<8)
#define CMD_DAT_CONT_BUS_WIDTH_4 (2<<8)
#define CMD_DAT_CONT_INIT (1<<7)
#define CMD_DAT_CONT_BUSY (1<<6)
#define CMD_DAT_CONT_STREAM_BLOCK (1<<5)
#define CMD_DAT_CONT_WRITE (1<<4)
#define CMD_DAT_CONT_DATA_ENABLE (1<<3)
#define CMD_DAT_CONT_RESPONSE_FORMAT_R1 (1)
#define CMD_DAT_CONT_RESPONSE_FORMAT_R2 (2)
#define CMD_DAT_CONT_RESPONSE_FORMAT_R3 (3)
#define CMD_DAT_CONT_RESPONSE_FORMAT_R4 (4)
#define CMD_DAT_CONT_RESPONSE_FORMAT_R5 (5)
#define CMD_DAT_CONT_RESPONSE_FORMAT_R6 (6)
#define INT_MASK_AUTO_CARD_DETECT (1<<6)
#define INT_MASK_DAT0_EN (1<<5)
#define INT_MASK_SDIO (1<<4)
#define INT_MASK_BUF_READY (1<<3)
#define INT_MASK_END_CMD_RES (1<<2)
#define INT_MASK_WRITE_OP_DONE (1<<1)
#define INT_MASK_DATA_TRAN (1<<0)
#define INT_ALL (0x7f)
#ifndef ASMARM_ARCH_MMC_H
#define ASMARM_ARCH_MMC_H
#include <linux/mmc/protocol.h>
struct imxmmc_platform_data {
int (*card_present)(void);
};
extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment