bnx2x: Re-factor the initialization code

Moving the code to a more logical place and beautifying it. No real change in
behavior.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/bnx2x.h

@@ -116,16 +116,22 @@
 #define REG_RD_DMAE(bp, offset, valp, len32) \
 	do { \
 		bnx2x_read_dmae(bp, offset, len32);\
-		memcpy(valp, bnx2x_sp(bp, wb_data[0]), len32 * 4); \
+		memcpy(valp, bnx2x_sp(bp, wb_data[0]), (len32) * 4); \
 	} while (0)
 
 #define REG_WR_DMAE(bp, offset, valp, len32) \
 	do { \
-		memcpy(bnx2x_sp(bp, wb_data[0]), valp, len32 * 4); \
+		memcpy(bnx2x_sp(bp, wb_data[0]), valp, (len32) * 4); \
 		bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data), \
 				 offset, len32); \
 	} while (0)
 
+#define VIRT_WR_DMAE_LEN(bp, data, addr, len32) \
+	do { \
+		memcpy(GUNZIP_BUF(bp), data, (len32) * 4); \
+		bnx2x_write_big_buf_wb(bp, addr, len32); \
+	} while (0)
+
 #define SHMEM_ADDR(bp, field)		(bp->common.shmem_base + \
 					 offsetof(struct shmem_region, field))
 #define SHMEM_RD(bp, field)		REG_RD(bp, SHMEM_ADDR(bp, field))
@@ -988,6 +994,9 @@ struct bnx2x {
 	dma_addr_t		gunzip_mapping;
 	int			gunzip_outlen;
 #define FW_BUF_SIZE			0x8000
+#define GUNZIP_BUF(bp)			(bp->gunzip_buf)
+#define GUNZIP_PHYS(bp)			(bp->gunzip_mapping)
+#define GUNZIP_OUTLEN(bp)		(bp->gunzip_outlen)
 
 	struct raw_op          *init_ops;
 	/* Init blocks offsets inside init_ops */
@@ -1003,6 +1012,18 @@ struct bnx2x {
 	const u8               *xsem_pram_data;
 	const u8               *csem_int_table_data;
 	const u8               *csem_pram_data;
+#define INIT_OPS(bp)			(bp->init_ops)
+#define INIT_OPS_OFFSETS(bp)		(bp->init_ops_offsets)
+#define INIT_DATA(bp)			(bp->init_data)
+#define INIT_TSEM_INT_TABLE_DATA(bp)	(bp->tsem_int_table_data)
+#define INIT_TSEM_PRAM_DATA(bp)		(bp->tsem_pram_data)
+#define INIT_USEM_INT_TABLE_DATA(bp)	(bp->usem_int_table_data)
+#define INIT_USEM_PRAM_DATA(bp)		(bp->usem_pram_data)
+#define INIT_XSEM_INT_TABLE_DATA(bp)	(bp->xsem_int_table_data)
+#define INIT_XSEM_PRAM_DATA(bp)		(bp->xsem_pram_data)
+#define INIT_CSEM_INT_TABLE_DATA(bp)	(bp->csem_int_table_data)
+#define INIT_CSEM_PRAM_DATA(bp)		(bp->csem_pram_data)
+
         const struct firmware  *firmware;
 };
 
@@ -1030,6 +1051,9 @@ int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port);
 int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
 int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
 u32 bnx2x_fw_command(struct bnx2x *bp, u32 command);
+void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
+void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
+			       u32 addr, u32 len);
 
 static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 			   int wait)

drivers/net/bnx2x_init.h

@@ -15,24 +15,11 @@
 #ifndef BNX2X_INIT_H
 #define BNX2X_INIT_H
 
-#define COMMON				0x1
-#define PORT0				0x2
-#define PORT1				0x4
-
-#define INIT_EMULATION			0x1
-#define INIT_FPGA			0x2
-#define INIT_ASIC			0x4
-#define INIT_HARDWARE			0x7
-
-#define TSTORM_INTMEM_ADDR		TSEM_REG_FAST_MEMORY
-#define CSTORM_INTMEM_ADDR		CSEM_REG_FAST_MEMORY
-#define XSTORM_INTMEM_ADDR		XSEM_REG_FAST_MEMORY
-#define USTORM_INTMEM_ADDR		USEM_REG_FAST_MEMORY
 /* RAM0 size in bytes */
 #define STORM_INTMEM_SIZE_E1		0x5800
 #define STORM_INTMEM_SIZE_E1H		0x10000
-#define STORM_INTMEM_SIZE(bp)	((CHIP_IS_E1H(bp) ? STORM_INTMEM_SIZE_E1H : \
-						    STORM_INTMEM_SIZE_E1) / 4)
+#define STORM_INTMEM_SIZE(bp) ((CHIP_IS_E1(bp) ? STORM_INTMEM_SIZE_E1 : \
+						    STORM_INTMEM_SIZE_E1H) / 4)
 
 
 /* Init operation types and structures */
@@ -53,10 +40,10 @@
 #define OP_WR_ASIC		0xc /* write single register on ASIC */
 
 /* Init stages */
+/* Never reorder stages !!! */
 #define COMMON_STAGE		0
 #define PORT0_STAGE		1
 #define PORT1_STAGE		2
-/* Never reorder FUNCx stages !!! */
 #define FUNC0_STAGE		3
 #define FUNC1_STAGE		4
 #define FUNC2_STAGE		5
@@ -108,6 +95,9 @@
 #define HC_BLOCK		33
 #define PXP2_BLOCK		34
 #define MISC_AEU_BLOCK		35
+#define PGLUE_B_BLOCK		36
+#define IGU_BLOCK		37
+
 
 /* Returns the index of start or end of a specific block stage in ops array*/
 #define BLOCK_OPS_IDX(block, stage, end) \
@@ -158,199 +148,5 @@ union init_op {
 	struct raw_op		raw;
 };
 
-/****************************************************************************
-* PXP
-****************************************************************************/
-/*
- * This code configures the PCI read/write arbiter
- * which implements a weighted round robin
- * between the virtual queues in the chip.
- *
- * The values were derived for each PCI max payload and max request size.
- * since max payload and max request size are only known at run time,
- * this is done as a separate init stage.
- */
-
-#define NUM_WR_Q			13
-#define NUM_RD_Q			29
-#define MAX_RD_ORD			3
-#define MAX_WR_ORD			2
-
-/* configuration for one arbiter queue */
-struct arb_line {
-	int l;
-	int add;
-	int ubound;
-};
-
-/* derived configuration for each read queue for each max request size */
-static const struct arb_line read_arb_data[NUM_RD_Q][MAX_RD_ORD + 1] = {
-/* 1 */	{ {8, 64, 25}, {16, 64, 25}, {32, 64, 25}, {64, 64, 41} },
-	{ {4, 8,  4},  {4,  8,  4},  {4,  8,  4},  {4,  8,  4}  },
-	{ {4, 3,  3},  {4,  3,  3},  {4,  3,  3},  {4,  3,  3}  },
-	{ {8, 3,  6},  {16, 3,  11}, {16, 3,  11}, {16, 3,  11} },
-	{ {8, 64, 25}, {16, 64, 25}, {32, 64, 25}, {64, 64, 41} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {64, 3,  41} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {64, 3,  41} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {64, 3,  41} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {64, 3,  41} },
-/* 10 */{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-/* 20 */{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 3,  6},  {16, 3,  11}, {32, 3,  21}, {32, 3,  21} },
-	{ {8, 64, 25}, {16, 64, 41}, {32, 64, 81}, {64, 64, 120} }
-};
-
-/* derived configuration for each write queue for each max request size */
-static const struct arb_line write_arb_data[NUM_WR_Q][MAX_WR_ORD + 1] = {
-/* 1 */	{ {4, 6,  3},  {4,  6,  3},  {4,  6,  3} },
-	{ {4, 2,  3},  {4,  2,  3},  {4,  2,  3} },
-	{ {8, 2,  6},  {16, 2,  11}, {16, 2,  11} },
-	{ {8, 2,  6},  {16, 2,  11}, {32, 2,  21} },
-	{ {8, 2,  6},  {16, 2,  11}, {32, 2,  21} },
-	{ {8, 2,  6},  {16, 2,  11}, {32, 2,  21} },
-	{ {8, 64, 25}, {16, 64, 25}, {32, 64, 25} },
-	{ {8, 2,  6},  {16, 2,  11}, {16, 2,  11} },
-	{ {8, 2,  6},  {16, 2,  11}, {16, 2,  11} },
-/* 10 */{ {8, 9,  6},  {16, 9,  11}, {32, 9,  21} },
-	{ {8, 47, 19}, {16, 47, 19}, {32, 47, 21} },
-	{ {8, 9,  6},  {16, 9,  11}, {16, 9,  11} },
-	{ {8, 64, 25}, {16, 64, 41}, {32, 64, 81} }
-};
-
-/* register addresses for read queues */
-static const struct arb_line read_arb_addr[NUM_RD_Q-1] = {
-/* 1 */	{PXP2_REG_RQ_BW_RD_L0, PXP2_REG_RQ_BW_RD_ADD0,
-		PXP2_REG_RQ_BW_RD_UBOUND0},
-	{PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1,
-		PXP2_REG_PSWRQ_BW_UB1},
-	{PXP2_REG_PSWRQ_BW_L2, PXP2_REG_PSWRQ_BW_ADD2,
-		PXP2_REG_PSWRQ_BW_UB2},
-	{PXP2_REG_PSWRQ_BW_L3, PXP2_REG_PSWRQ_BW_ADD3,
-		PXP2_REG_PSWRQ_BW_UB3},
-	{PXP2_REG_RQ_BW_RD_L4, PXP2_REG_RQ_BW_RD_ADD4,
-		PXP2_REG_RQ_BW_RD_UBOUND4},
-	{PXP2_REG_RQ_BW_RD_L5, PXP2_REG_RQ_BW_RD_ADD5,
-		PXP2_REG_RQ_BW_RD_UBOUND5},
-	{PXP2_REG_PSWRQ_BW_L6, PXP2_REG_PSWRQ_BW_ADD6,
-		PXP2_REG_PSWRQ_BW_UB6},
-	{PXP2_REG_PSWRQ_BW_L7, PXP2_REG_PSWRQ_BW_ADD7,
-		PXP2_REG_PSWRQ_BW_UB7},
-	{PXP2_REG_PSWRQ_BW_L8, PXP2_REG_PSWRQ_BW_ADD8,
-		PXP2_REG_PSWRQ_BW_UB8},
-/* 10 */{PXP2_REG_PSWRQ_BW_L9, PXP2_REG_PSWRQ_BW_ADD9,
-		PXP2_REG_PSWRQ_BW_UB9},
-	{PXP2_REG_PSWRQ_BW_L10, PXP2_REG_PSWRQ_BW_ADD10,
-		PXP2_REG_PSWRQ_BW_UB10},
-	{PXP2_REG_PSWRQ_BW_L11, PXP2_REG_PSWRQ_BW_ADD11,
-		PXP2_REG_PSWRQ_BW_UB11},
-	{PXP2_REG_RQ_BW_RD_L12, PXP2_REG_RQ_BW_RD_ADD12,
-		PXP2_REG_RQ_BW_RD_UBOUND12},
-	{PXP2_REG_RQ_BW_RD_L13, PXP2_REG_RQ_BW_RD_ADD13,
-		PXP2_REG_RQ_BW_RD_UBOUND13},
-	{PXP2_REG_RQ_BW_RD_L14, PXP2_REG_RQ_BW_RD_ADD14,
-		PXP2_REG_RQ_BW_RD_UBOUND14},
-	{PXP2_REG_RQ_BW_RD_L15, PXP2_REG_RQ_BW_RD_ADD15,
-		PXP2_REG_RQ_BW_RD_UBOUND15},
-	{PXP2_REG_RQ_BW_RD_L16, PXP2_REG_RQ_BW_RD_ADD16,
-		PXP2_REG_RQ_BW_RD_UBOUND16},
-	{PXP2_REG_RQ_BW_RD_L17, PXP2_REG_RQ_BW_RD_ADD17,
-		PXP2_REG_RQ_BW_RD_UBOUND17},
-	{PXP2_REG_RQ_BW_RD_L18, PXP2_REG_RQ_BW_RD_ADD18,
-		PXP2_REG_RQ_BW_RD_UBOUND18},
-/* 20 */{PXP2_REG_RQ_BW_RD_L19, PXP2_REG_RQ_BW_RD_ADD19,
-		PXP2_REG_RQ_BW_RD_UBOUND19},
-	{PXP2_REG_RQ_BW_RD_L20, PXP2_REG_RQ_BW_RD_ADD20,
-		PXP2_REG_RQ_BW_RD_UBOUND20},
-	{PXP2_REG_RQ_BW_RD_L22, PXP2_REG_RQ_BW_RD_ADD22,
-		PXP2_REG_RQ_BW_RD_UBOUND22},
-	{PXP2_REG_RQ_BW_RD_L23, PXP2_REG_RQ_BW_RD_ADD23,
-		PXP2_REG_RQ_BW_RD_UBOUND23},
-	{PXP2_REG_RQ_BW_RD_L24, PXP2_REG_RQ_BW_RD_ADD24,
-		PXP2_REG_RQ_BW_RD_UBOUND24},
-	{PXP2_REG_RQ_BW_RD_L25, PXP2_REG_RQ_BW_RD_ADD25,
-		PXP2_REG_RQ_BW_RD_UBOUND25},
-	{PXP2_REG_RQ_BW_RD_L26, PXP2_REG_RQ_BW_RD_ADD26,
-		PXP2_REG_RQ_BW_RD_UBOUND26},
-	{PXP2_REG_RQ_BW_RD_L27, PXP2_REG_RQ_BW_RD_ADD27,
-		PXP2_REG_RQ_BW_RD_UBOUND27},
-	{PXP2_REG_PSWRQ_BW_L28, PXP2_REG_PSWRQ_BW_ADD28,
-		PXP2_REG_PSWRQ_BW_UB28}
-};
-
-/* register addresses for write queues */
-static const struct arb_line write_arb_addr[NUM_WR_Q-1] = {
-/* 1 */	{PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1,
-		PXP2_REG_PSWRQ_BW_UB1},
-	{PXP2_REG_PSWRQ_BW_L2, PXP2_REG_PSWRQ_BW_ADD2,
-		PXP2_REG_PSWRQ_BW_UB2},
-	{PXP2_REG_PSWRQ_BW_L3, PXP2_REG_PSWRQ_BW_ADD3,
-		PXP2_REG_PSWRQ_BW_UB3},
-	{PXP2_REG_PSWRQ_BW_L6, PXP2_REG_PSWRQ_BW_ADD6,
-		PXP2_REG_PSWRQ_BW_UB6},
-	{PXP2_REG_PSWRQ_BW_L7, PXP2_REG_PSWRQ_BW_ADD7,
-		PXP2_REG_PSWRQ_BW_UB7},
-	{PXP2_REG_PSWRQ_BW_L8, PXP2_REG_PSWRQ_BW_ADD8,
-		PXP2_REG_PSWRQ_BW_UB8},
-	{PXP2_REG_PSWRQ_BW_L9, PXP2_REG_PSWRQ_BW_ADD9,
-		PXP2_REG_PSWRQ_BW_UB9},
-	{PXP2_REG_PSWRQ_BW_L10, PXP2_REG_PSWRQ_BW_ADD10,
-		PXP2_REG_PSWRQ_BW_UB10},
-	{PXP2_REG_PSWRQ_BW_L11, PXP2_REG_PSWRQ_BW_ADD11,
-		PXP2_REG_PSWRQ_BW_UB11},
-/* 10 */{PXP2_REG_PSWRQ_BW_L28, PXP2_REG_PSWRQ_BW_ADD28,
-		PXP2_REG_PSWRQ_BW_UB28},
-	{PXP2_REG_RQ_BW_WR_L29, PXP2_REG_RQ_BW_WR_ADD29,
-		PXP2_REG_RQ_BW_WR_UBOUND29},
-	{PXP2_REG_RQ_BW_WR_L30, PXP2_REG_RQ_BW_WR_ADD30,
-		PXP2_REG_RQ_BW_WR_UBOUND30}
-};
-
-
-/****************************************************************************
-* CDU
-****************************************************************************/
-
-#define CDU_REGION_NUMBER_XCM_AG	2
-#define CDU_REGION_NUMBER_UCM_AG	4
-
-/**
- * String-to-compress [31:8] = CID (all 24 bits)
- * String-to-compress [7:4] = Region
- * String-to-compress [3:0] = Type
- */
-#define CDU_VALID_DATA(_cid, _region, _type) \
-		(((_cid) << 8) | (((_region) & 0xf) << 4) | (((_type) & 0xf)))
-#define CDU_CRC8(_cid, _region, _type) \
-			calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff)
-#define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type) \
-			(0x80 | (CDU_CRC8(_cid, _region, _type) & 0x7f))
-#define CDU_RSRVD_VALUE_TYPE_B(_crc, _type) \
-	(0x80 | ((_type) & 0xf << 3) | (CDU_CRC8(_cid, _region, _type) & 0x7))
-#define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val)	((_val) & ~0x80)
-
-
-/* registers addresses are not in order
-   so these arrays help simplify the code */
-static const int cm_blocks[9] = {
-	MISC_BLOCK, TCM_BLOCK,  UCM_BLOCK,  CCM_BLOCK, XCM_BLOCK,
-	TSEM_BLOCK, USEM_BLOCK, CSEM_BLOCK, XSEM_BLOCK
-};
-
 #endif /* BNX2X_INIT_H */
 

drivers/net/bnx2x_main.c

@@ -153,7 +153,7 @@ MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl);
 /* used only at init
  * locking is done by mcp
  */
-static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val)
+void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val)
 {
 	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, addr);
 	pci_write_config_dword(bp->pdev, PCICFG_GRC_DATA, val);
@@ -346,6 +346,21 @@ void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
 	mutex_unlock(&bp->dmae_mutex);
 }
 
+void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
+			       u32 addr, u32 len)
+{
+	int offset = 0;
+
+	while (len > DMAE_LEN32_WR_MAX) {
+		bnx2x_write_dmae(bp, phys_addr + offset,
+				 addr + offset, DMAE_LEN32_WR_MAX);
+		offset += DMAE_LEN32_WR_MAX * 4;
+		len -= DMAE_LEN32_WR_MAX;
+	}
+
+	bnx2x_write_dmae(bp, phys_addr + offset, addr + offset, len);
+}
+
 /* used only for slowpath so not inlined */
 static void bnx2x_wb_wr(struct bnx2x *bp, int reg, u32 val_hi, u32 val_lo)
 {
@@ -5917,6 +5932,24 @@ static void bnx2x_reset_common(struct bnx2x *bp)
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
 }
 
+static void bnx2x_init_pxp(struct bnx2x *bp)
+{
+	u16 devctl;
+	int r_order, w_order;
+
+	pci_read_config_word(bp->pdev,
+			     bp->pcie_cap + PCI_EXP_DEVCTL, &devctl);
+	DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl);
+	w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
+	if (bp->mrrs == -1)
+		r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12);
+	else {
+		DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs);
+		r_order = bp->mrrs;
+	}
+
+	bnx2x_init_pxp_arb(bp, r_order, w_order);
+}
 
 static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp)
 {
@@ -6479,9 +6512,15 @@ static int bnx2x_init_func(struct bnx2x *bp)
 
 
 	if (CHIP_IS_E1H(bp)) {
-		for (i = 0; i < 9; i++)
-			bnx2x_init_block(bp,
-					 cm_blocks[i], FUNC0_STAGE + func);
+		bnx2x_init_block(bp, MISC_BLOCK, FUNC0_STAGE + func);
+		bnx2x_init_block(bp, TCM_BLOCK, FUNC0_STAGE + func);
+		bnx2x_init_block(bp, UCM_BLOCK, FUNC0_STAGE + func);
+		bnx2x_init_block(bp, CCM_BLOCK, FUNC0_STAGE + func);
+		bnx2x_init_block(bp, XCM_BLOCK, FUNC0_STAGE + func);
+		bnx2x_init_block(bp, TSEM_BLOCK, FUNC0_STAGE + func);
+		bnx2x_init_block(bp, USEM_BLOCK, FUNC0_STAGE + func);
+		bnx2x_init_block(bp, CSEM_BLOCK, FUNC0_STAGE + func);
+		bnx2x_init_block(bp, XSEM_BLOCK, FUNC0_STAGE + func);
 
 		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
 		REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, bp->e1hov);
@@ -11834,21 +11873,21 @@ static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
 	BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, be16_to_cpu_n);
 
 	/* STORMs firmware */
-	bp->tsem_int_table_data = bp->firmware->data +
+	INIT_TSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
 			be32_to_cpu(fw_hdr->tsem_int_table_data.offset);
-	bp->tsem_pram_data      = bp->firmware->data +
+	INIT_TSEM_PRAM_DATA(bp)      = bp->firmware->data +
 			be32_to_cpu(fw_hdr->tsem_pram_data.offset);
-	bp->usem_int_table_data = bp->firmware->data +
+	INIT_USEM_INT_TABLE_DATA(bp) = bp->firmware->data +
 			be32_to_cpu(fw_hdr->usem_int_table_data.offset);
-	bp->usem_pram_data      = bp->firmware->data +
+	INIT_USEM_PRAM_DATA(bp)      = bp->firmware->data +
 			be32_to_cpu(fw_hdr->usem_pram_data.offset);
-	bp->xsem_int_table_data = bp->firmware->data +
+	INIT_XSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
 			be32_to_cpu(fw_hdr->xsem_int_table_data.offset);
-	bp->xsem_pram_data      = bp->firmware->data +
+	INIT_XSEM_PRAM_DATA(bp)      = bp->firmware->data +
 			be32_to_cpu(fw_hdr->xsem_pram_data.offset);
-	bp->csem_int_table_data = bp->firmware->data +
+	INIT_CSEM_INT_TABLE_DATA(bp) = bp->firmware->data +
 			be32_to_cpu(fw_hdr->csem_int_table_data.offset);
-	bp->csem_pram_data      = bp->firmware->data +
+	INIT_CSEM_PRAM_DATA(bp)      = bp->firmware->data +
 			be32_to_cpu(fw_hdr->csem_pram_data.offset);
 
 	return 0;

drivers/net/bnx2x_reg.h

@@ -6019,3 +6019,116 @@ Theotherbitsarereservedandshouldbezero*/
 #define COMMAND_REG_SIMD_NOMASK     0x1c
 
 
+#define IGU_MEM_BASE						0x0000
+
+#define IGU_MEM_MSIX_BASE					0x0000
+#define IGU_MEM_MSIX_UPPER					0x007f
+#define IGU_MEM_MSIX_RESERVED_UPPER			0x01ff
+
+#define IGU_MEM_PBA_MSIX_BASE				0x0200
+#define IGU_MEM_PBA_MSIX_UPPER				0x0200
+
+#define IGU_CMD_BACKWARD_COMP_PROD_UPD		0x0201
+#define IGU_MEM_PBA_MSIX_RESERVED_UPPER 	0x03ff
+
+#define IGU_CMD_INT_ACK_BASE				0x0400
+#define IGU_CMD_INT_ACK_UPPER\
+	(IGU_CMD_INT_ACK_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
+#define IGU_CMD_INT_ACK_RESERVED_UPPER		0x04ff
+
+#define IGU_CMD_E2_PROD_UPD_BASE			0x0500
+#define IGU_CMD_E2_PROD_UPD_UPPER\
+	(IGU_CMD_E2_PROD_UPD_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
+#define IGU_CMD_E2_PROD_UPD_RESERVED_UPPER	0x059f
+
+#define IGU_CMD_ATTN_BIT_UPD_UPPER			0x05a0
+#define IGU_CMD_ATTN_BIT_SET_UPPER			0x05a1
+#define IGU_CMD_ATTN_BIT_CLR_UPPER			0x05a2
+
+#define IGU_REG_SISR_MDPC_WMASK_UPPER		0x05a3
+#define IGU_REG_SISR_MDPC_WMASK_LSB_UPPER	0x05a4
+#define IGU_REG_SISR_MDPC_WMASK_MSB_UPPER	0x05a5
+#define IGU_REG_SISR_MDPC_WOMASK_UPPER		0x05a6
+
+#define IGU_REG_RESERVED_UPPER				0x05ff
+
+
+#define CDU_REGION_NUMBER_XCM_AG 2
+#define CDU_REGION_NUMBER_UCM_AG 4
+
+
+/**
+ * String-to-compress [31:8] = CID (all 24 bits)
+ * String-to-compress [7:4] = Region
+ * String-to-compress [3:0] = Type
+ */
+#define CDU_VALID_DATA(_cid, _region, _type)\
+	(((_cid) << 8) | (((_region)&0xf)<<4) | (((_type)&0xf)))
+#define CDU_CRC8(_cid, _region, _type)\
+	(calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff))
+#define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type)\
+	(0x80 | ((CDU_CRC8(_cid, _region, _type)) & 0x7f))
+#define CDU_RSRVD_VALUE_TYPE_B(_crc, _type)\
+	(0x80 | ((_type)&0xf << 3) | ((CDU_CRC8(_cid, _region, _type)) & 0x7))
+#define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80)
+
+/******************************************************************************
+ * Description:
+ *	   Calculates crc 8 on a word value: polynomial 0-1-2-8
+ *	   Code was translated from Verilog.
+ * Return:
+ *****************************************************************************/
+static inline u8 calc_crc8(u32 data, u8 crc)
+{
+	u8 D[32];
+	u8 NewCRC[8];
+	u8 C[8];
+	u8 crc_res;
+	u8 i;
+
+	/* split the data into 31 bits */
+	for (i = 0; i < 32; i++) {
+		D[i] = (u8)(data & 1);
+		data = data >> 1;
+	}
+
+	/* split the crc into 8 bits */
+	for (i = 0; i < 8; i++) {
+		C[i] = crc & 1;
+		crc = crc >> 1;
+	}
+
+	NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
+		    D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
+		    C[6] ^ C[7];
+	NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
+		    D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
+		    D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^
+		    C[6];
+	NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
+		    D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
+		    C[0] ^ C[1] ^ C[4] ^ C[5];
+	NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
+		    D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
+		    C[1] ^ C[2] ^ C[5] ^ C[6];
+	NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
+		    D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
+		    C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
+	NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
+		    D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
+		    C[3] ^ C[4] ^ C[7];
+	NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
+		    D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
+		    C[5];
+	NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
+		    D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
+		    C[6];
+
+	crc_res = 0;
+	for (i = 0; i < 8; i++)
+		crc_res |= (NewCRC[i] << i);
+
+	return crc_res;
+}
+
+