Commit 58c1bd4c authored by Jeff Garzik's avatar Jeff Garzik

Move dmfe, winbond-840, xircom_cb, xircom_tulip_cb, de2104x and de4x5

net drivers to drivers/net/tulip directory.
parent 86bfa5ea
......@@ -162,6 +162,7 @@ DRIVERS-$(CONFIG_MTD) += drivers/mtd/mtdlink.o
DRIVERS-$(CONFIG_PCMCIA) += drivers/pcmcia/pcmcia.o
DRIVERS-$(CONFIG_NET_PCMCIA) += drivers/net/pcmcia/pcmcia_net.o
DRIVERS-$(CONFIG_NET_WIRELESS) += drivers/net/wireless/wireless_net.o
DRIVERS-$(CONFIG_NET_TULIP) += drivers/net/tulip/tulip_net.o
DRIVERS-$(CONFIG_PCMCIA_CHRDEV) += drivers/char/pcmcia/pcmcia_char.o
DRIVERS-$(CONFIG_DIO) += drivers/dio/dio.a
DRIVERS-$(CONFIG_SBUS) += drivers/sbus/sbus_all.o
......
......@@ -1333,71 +1333,6 @@ CONFIG_APRICOT
<file:Documentation/networking/net-modules.txt>. The module will be
called apricot.o.
CONFIG_DE4X5
This is support for the DIGITAL series of PCI/EISA Ethernet cards.
These include the DE425, DE434, DE435, DE450 and DE500 models. If
you have a network card of this type, say Y and read the
Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. More specific
information is contained in
<file:Documentation/networking/de4x5.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called de4x5.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
CONFIG_DE2104X
This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip
21040 (Tulip series) chips. Some LinkSys PCI cards are
of this type. (If your card is NOT SMC EtherPower 10/100 PCI
(smc9332dst), you can also try the driver for "Generic DECchip"
cards, above. However, most people with a network card of this type
will say Y here.) Do read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. More specific
information is contained in
<file:Documentation/DocBook/tulip-user.tmpl>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tulip.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
CONFIG_TULIP
This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip
21040/21041/21140 (Tulip series) chips. Some LinkSys PCI cards are
of this type. (If your card is NOT SMC EtherPower 10/100 PCI
(smc9332dst), you can also try the driver for "Generic DECchip"
cards, above. However, most people with a network card of this type
will say Y here.) Do read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. More specific
information is contained in
<file:Documentation/networking/tulip.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tulip.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
CONFIG_TULIP_MWI
This configures your Tulip card specifically for the card and
system cache line size type you are using.
This is experimental code, not yet tested on many boards.
If unsure, say N.
CONFIG_TULIP_MMIO
Use PCI shared memory for the NIC registers, rather than going through
the Tulip's PIO (programmed I/O ports). Faster, but could produce
obscure bugs if your mainboard has memory controller timing issues.
If in doubt, say N.
CONFIG_DGRS
This is support for the Digi International RightSwitch series of
PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6
......@@ -1482,18 +1417,6 @@ CONFIG_VIA_RHINE_MMIO
If unsure, say N.
CONFIG_DM9102
This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
Davicom (<http://www.davicom.com.tw/>). If you have such a network
(Ethernet) card, say Y. Some information is contained in the file
<file:Documentation/networking/dmfe.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called dmfe.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
CONFIG_ES3210
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
......@@ -1525,12 +1448,6 @@ CONFIG_SUNDANCE
More specific information and updates are available from
<http://www.scyld.com/network/sundance.html>.
CONFIG_WINBOND_840
This driver is for the Winbond W89c840 chip. It also works with
the TX9882 chip on the Compex RL100-ATX board.
More specific information and updates are available from
<http://www.scyld.com/network/drivers.html>.
CONFIG_ZNET
The Zenith Z-Note notebook computer has a built-in network
(Ethernet) card, and this is the Linux driver for it. Note that the
......
......@@ -155,17 +155,9 @@ if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
dep_tristate ' Apricot Xen-II on board Ethernet' CONFIG_APRICOT $CONFIG_ISA
dep_tristate ' CS89x0 support' CONFIG_CS89x0 $CONFIG_ISA
dep_tristate ' Early DECchip Tulip (dc2104x) PCI support (EXPERIMENTAL)' CONFIG_DE2104X $CONFIG_PCI $CONFIG_EXPERIMENTAL
dep_tristate ' DECchip Tulip (dc2114x) PCI support' CONFIG_TULIP $CONFIG_PCI
if [ "$CONFIG_TULIP" = "y" -o "$CONFIG_TULIP" = "m" ]; then
dep_bool ' New bus configuration (EXPERIMENTAL)' CONFIG_TULIP_MWI $CONFIG_EXPERIMENTAL
bool ' Use PCI shared mem for NIC registers' CONFIG_TULIP_MMIO
fi
if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then
tristate ' Generic DECchip & DIGITAL EtherWORKS PCI/EISA' CONFIG_DE4X5
tristate ' Digi Intl. RightSwitch SE-X support' CONFIG_DGRS
fi
dep_tristate ' Davicom DM910x/DM980x support' CONFIG_DM9102 $CONFIG_PCI
dep_tristate ' EtherExpressPro/100 support (eepro100, original Becker driver)' CONFIG_EEPRO100 $CONFIG_PCI
dep_tristate ' EtherExpressPro/100 support (e100, Alternate Intel driver)' CONFIG_E100 $CONFIG_PCI
dep_tristate ' Mylex EISA LNE390A/B support (EXPERIMENTAL)' CONFIG_LNE390 $CONFIG_EISA $CONFIG_EXPERIMENTAL
......@@ -191,7 +183,6 @@ if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
fi
dep_tristate ' VIA Rhine support' CONFIG_VIA_RHINE $CONFIG_PCI
dep_mbool ' Use MMIO instead of PIO (EXPERIMENTAL)' CONFIG_VIA_RHINE_MMIO $CONFIG_VIA_RHINE $CONFIG_EXPERIMENTAL
dep_tristate ' Winbond W89c840 Ethernet support' CONFIG_WINBOND_840 $CONFIG_PCI
if [ "$CONFIG_OBSOLETE" = "y" ]; then
dep_bool ' Zenith Z-Note support (EXPERIMENTAL)' CONFIG_ZNET $CONFIG_ISA
fi
......@@ -328,6 +319,9 @@ fi
source drivers/net/wan/Config.in
if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" -o "$CONFIG_CARDBUS" != "n" ]; then
source drivers/net/tulip/Config.in
fi
if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then
source drivers/net/pcmcia/Config.in
fi
......@@ -8,7 +8,7 @@ obj-m :=
obj-n :=
obj- :=
mod-subdirs := appletalk arcnet fc irda tokenring pcmcia wireless wan
mod-subdirs := appletalk arcnet fc irda tokenring tulip pcmcia wireless wan
O_TARGET := net.o
......@@ -21,10 +21,6 @@ export-objs := 8390.o arlan.o aironet4500_core.o aironet4500_card.o \
list-multi := rcpci.o
rcpci-objs := rcpci45.o rclanmtl.o
ifeq ($(CONFIG_TULIP),y)
obj-y += tulip/tulip.o
endif
ifeq ($(CONFIG_E100),y)
obj-y += e1000/e100.o
endif
......@@ -38,7 +34,7 @@ endif
subdir-$(CONFIG_NET_PCMCIA) += pcmcia
subdir-$(CONFIG_NET_WIRELESS) += wireless
subdir-$(CONFIG_TULIP) += tulip
subdir-$(CONFIG_NET_TULIP) += tulip
subdir-$(CONFIG_E100) += e100
subdir-$(CONFIG_E1000) += e1000
subdir-$(CONFIG_IRDA) += irda
......@@ -78,7 +74,6 @@ obj-$(CONFIG_EEPRO100) += eepro100.o
obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_EPIC100) += epic100.o mii.o
obj-$(CONFIG_SIS900) += sis900.o
obj-$(CONFIG_DM9102) += dmfe.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
obj-$(CONFIG_ACENIC) += acenic.o
obj-$(CONFIG_VETH) += veth.o
......@@ -109,7 +104,7 @@ obj-$(CONFIG_AIRONET4500_NONCS) += aironet4500_card.o
obj-$(CONFIG_AIRONET4500_PROC) += aironet4500_proc.o
obj-$(CONFIG_AIRONET4500_CS) += aironet4500_proc.o
obj-$(CONFIG_WINBOND_840) += winbond-840.o mii.o
obj-$(CONFIG_WINBOND_840) += mii.o
obj-$(CONFIG_SUNDANCE) += sundance.o
obj-$(CONFIG_HAMACHI) += hamachi.o
obj-$(CONFIG_NET) += Space.o setup.o net_init.o loopback.o
......@@ -181,8 +176,6 @@ obj-$(CONFIG_LAN_SAA9730) += saa9730.o
obj-$(CONFIG_DEPCA) += depca.o
obj-$(CONFIG_EWRK3) += ewrk3.o
obj-$(CONFIG_ATP) += atp.o
obj-$(CONFIG_DE4X5) += de4x5.o
obj-$(CONFIG_DE2104X) += de2104x.o
obj-$(CONFIG_NI5010) += ni5010.o
obj-$(CONFIG_NI52) += ni52.o
obj-$(CONFIG_NI65) += ni65.o
......
......@@ -20,11 +20,6 @@ if [ "$CONFIG_NET_PCMCIA" = "y" ]; then
dep_tristate ' IBM PCMCIA tokenring adapter support' CONFIG_PCMCIA_IBMTR $CONFIG_TR $CONFIG_PCMCIA
fi
if [ "$CONFIG_CARDBUS" = "y" ]; then
tristate ' Xircom CardBus support (new driver)' CONFIG_PCMCIA_XIRCOM
tristate ' Xircom Tulip-like CardBus support (old driver)' CONFIG_PCMCIA_XIRTULIP
fi
bool ' Pcmcia Wireless LAN' CONFIG_NET_PCMCIA_RADIO
if [ "$CONFIG_NET_PCMCIA_RADIO" = "y" ]; then
dep_tristate ' Aviator/Raytheon 2.4MHz wireless support' CONFIG_PCMCIA_RAYCS $CONFIG_PCMCIA
......
......@@ -29,11 +29,6 @@ obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o
obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o
obj-$(CONFIG_AIRONET4500_CS) += aironet4500_cs.o
# Cardbus client drivers
obj-$(CONFIG_PCMCIA_XIRTULIP) += xircom_tulip_cb.o
obj-$(CONFIG_PCMCIA_XIRCOM) += xircom_cb.o
obj-$(CONFIG_PCMCIA_IBMTR) += ibmtr_cs.o
include $(TOPDIR)/Rules.make
CONFIG_PCMCIA_XIRCOM
This driver is for the Digital "Tulip" Ethernet CardBus adapters.
It should work with most DEC 21*4*-based chips/ethercards, as well
as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
ASIX.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called xircom_cb.o. If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say N.
CONFIG_PCMCIA_XIRTULIP
This driver is for the Digital "Tulip" Ethernet CardBus adapters.
It should work with most DEC 21*4*-based chips/ethercards, as well
as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
ASIX.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called xircom_tulip_cb.o. If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say N.
CONFIG_DE2104X
This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip
21040 (Tulip series) chips. Some LinkSys PCI cards are
of this type. (If your card is NOT SMC EtherPower 10/100 PCI
(smc9332dst), you can also try the driver for "Generic DECchip"
cards, above. However, most people with a network card of this type
will say Y here.) Do read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. More specific
information is contained in
<file:Documentation/DocBook/tulip-user.tmpl>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tulip.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
CONFIG_TULIP
This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip
21040/21041/21140 (Tulip series) chips. Some LinkSys PCI cards are
of this type. (If your card is NOT SMC EtherPower 10/100 PCI
(smc9332dst), you can also try the driver for "Generic DECchip"
cards, above. However, most people with a network card of this type
will say Y here.) Do read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. More specific
information is contained in
<file:Documentation/networking/tulip.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tulip.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
CONFIG_TULIP_MWI
This configures your Tulip card specifically for the card and
system cache line size type you are using.
This is experimental code, not yet tested on many boards.
If unsure, say N.
CONFIG_TULIP_MMIO
Use PCI shared memory for the NIC registers, rather than going through
the Tulip's PIO (programmed I/O ports). Faster, but could produce
obscure bugs if your mainboard has memory controller timing issues.
If in doubt, say N.
CONFIG_NET_TULIP
This selects the "Tulip" family of EISA/PCI network cards.
CONFIG_DE4X5
This is support for the DIGITAL series of PCI/EISA Ethernet cards.
These include the DE425, DE434, DE435, DE450 and DE500 models. If
you have a network card of this type, say Y and read the
Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. More specific
information is contained in
<file:Documentation/networking/de4x5.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called de4x5.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
CONFIG_WINBOND_840
This driver is for the Winbond W89c840 chip. It also works with
the TX9882 chip on the Compex RL100-ATX board.
More specific information and updates are available from
<http://www.scyld.com/network/drivers.html>.
CONFIG_DM9102
This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
Davicom (<http://www.davicom.com.tw/>). If you have such a network
(Ethernet) card, say Y. Some information is contained in the file
<file:Documentation/networking/dmfe.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called dmfe.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
#
# Tulip family network device configuration
#
mainmenu_option next_comment
comment '"Tulip" family network device support'
bool '"Tulip" family network device support' CONFIG_NET_TULIP
if [ "$CONFIG_NET_TULIP" = "y" ]; then
dep_tristate ' Early DECchip Tulip (dc2104x) PCI support (EXPERIMENTAL)' CONFIG_DE2104X $CONFIG_PCI $CONFIG_EXPERIMENTAL
dep_tristate ' DECchip Tulip (dc2114x) PCI support' CONFIG_TULIP $CONFIG_PCI
if [ "$CONFIG_TULIP" = "y" -o "$CONFIG_TULIP" = "m" ]; then
dep_bool ' New bus configuration (EXPERIMENTAL)' CONFIG_TULIP_MWI $CONFIG_EXPERIMENTAL
bool ' Use PCI shared mem for NIC registers' CONFIG_TULIP_MMIO
fi
if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then
tristate ' Generic DECchip & DIGITAL EtherWORKS PCI/EISA' CONFIG_DE4X5
fi
dep_tristate ' Winbond W89c840 Ethernet support' CONFIG_WINBOND_840 $CONFIG_PCI
dep_tristate ' Davicom DM910x/DM980x support' CONFIG_DM9102 $CONFIG_PCI
if [ "$CONFIG_CARDBUS" = "y" ]; then
tristate ' Xircom CardBus support (new driver)' CONFIG_PCMCIA_XIRCOM
tristate ' Xircom Tulip-like CardBus support (old driver)' CONFIG_PCMCIA_XIRTULIP
fi
fi
endmenu
#
# Makefile for the Tulip ethernet driver
# drivers/net/tulip/Makefile
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
# Makefile for the Linux "Tulip" family network device drivers.
#
# Note 2! The CFLAGS definitions are now in the main makefile...
O_TARGET := tulip.o
O_TARGET := tulip_net.o
obj-y := eeprom.o interrupt.o media.o \
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Things that need to export symbols
export-objs :=
obj-$(CONFIG_PCMCIA_XIRTULIP) += xircom_tulip_cb.o
obj-$(CONFIG_PCMCIA_XIRCOM) += xircom_cb.o
obj-$(CONFIG_DM9102) += dmfe.o
obj-$(CONFIG_WINBOND_840) += winbond-840.o
obj-$(CONFIG_DE2104X) += de2104x.o
obj-$(CONFIG_TULIP) += tulip.o
obj-$(CONFIG_DE4X5) += de4x5.o
# Declare multi-part drivers.
list-multi := tulip.o
tulip-objs := eeprom.o interrupt.o media.o \
timer.o tulip_core.o \
21142.o pnic.o pnic2.o
obj-m := $(O_TARGET)
include $(TOPDIR)/Rules.make
# Link rules for multi-part drivers.
tulip.o: $(tulip-objs)
$(LD) -r -o $@ $(tulip-objs)
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment